summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml')
-rw-r--r--Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml164
1 files changed, 164 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
new file mode 100644
index 000000000..3d5782deb
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/samsung,s3c2410-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC I2C Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - samsung,s3c2410-i2c
+ - samsung,s3c2440-i2c
+ # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
+ - samsung,s3c2440-hdmiphy-i2c
+ # For s3c2440-like I2C used as a host to SATA PHY controller on an
+ # internal bus:
+ - samsung,exynos5-sata-phy-i2c
+
+ '#address-cells':
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: i2c
+
+ gpios:
+ description: |
+ The order of the GPIOs should be the following:: <SDA, SCL>. The GPIO
+ specifier depends on the gpio controller. Required in all cases except
+ for "samsung,s3c2440-hdmiphy-i2c" whose input/output lines are
+ permanently wired to the respective client.
+ This property is deprecated. Use "pinctrl-0" and "pinctrl-names" instead.
+ deprecated: yes
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ samsung,i2c-max-bus-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Desired frequency in Hz of the bus.
+ default: 100000
+
+ samsung,i2c-sda-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Delay (in ns) applied to data line (SDA) edges.
+ default: 0
+
+ samsung,i2c-slave-addr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Slave address in multi-master environment.
+ default: 0
+
+ samsung,sysreg-phandle:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Pandle to syscon used to control the system registers.
+
+ '#size-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,s3c2440-hdmiphy-i2c
+ - samsung,exynos5-sata-phy-i2c
+ then:
+ properties:
+ gpios: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,s3c2410-i2c
+ - samsung,s3c2440-i2c
+ - samsung,s3c2440-hdmiphy-i2c
+ then:
+ required:
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5250.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2c@12c60000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C60000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_I2C0>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
+
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ samsung,i2c-slave-addr = <0x66>;
+
+ eeprom@50 {
+ compatible = "samsung,s524ad0xd1", "atmel,24c128";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@12ce0000 {
+ compatible = "samsung,s3c2440-hdmiphy-i2c";
+ reg = <0x12CE0000 0x1000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_I2C_HDMI>;
+ clock-names = "i2c";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ phy-i2c@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+ };
+
+ i2c@121d0000 {
+ compatible = "samsung,exynos5-sata-phy-i2c";
+ reg = <0x121D0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_SATA_PHYI2C>;
+ clock-names = "i2c";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+
+ phy-i2c@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
+ };