summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml')
-rw-r--r--Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml112
1 files changed, 112 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
new file mode 100644
index 000000000..9438fffaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/yamaha,yas530.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Yamaha YAS530 family of magnetometer sensors
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+ The Yamaha YAS530 magnetometers is a line of 3-axis magnetometers
+ first introduced by Yamaha in 2009 with the YAS530. They are successors
+ of Yamaha's first magnetometer YAS529. Over the years this magnetometer
+ has been miniaturized and appeared in a number of different variants.
+
+properties:
+ $nodename:
+ pattern: '^magnetometer@[0-9a-f]+$'
+
+ compatible:
+ items:
+ - enum:
+ - yamaha,yas530
+ - yamaha,yas532
+ - yamaha,yas533
+ - yamaha,yas535
+ - yamaha,yas536
+ - yamaha,yas537
+ - yamaha,yas539
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description: The YAS530 sensor has a RSTN pin used to reset
+ the logic inside the sensor. This GPIO line should connect
+ to that pin and be marked as GPIO_ACTIVE_LOW.
+
+ interrupts:
+ maxItems: 1
+ description: Interrupt for INT pin for interrupt generation.
+ The polarity, whether the interrupt is active on the rising
+ or the falling edge, is software-configurable in the hardware.
+
+ vdd-supply:
+ description: An optional regulator providing core power supply
+ on the VDD pin, typically 1.8 V or 3.0 V.
+
+ iovdd-supply:
+ description: An optional regulator providing I/O power supply
+ for the I2C interface on the IOVDD pin, typically 1.8 V.
+
+ mount-matrix:
+ description: An optional 3x3 mounting rotation matrix.
+
+allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ items:
+ const: yamaha,yas530
+ then:
+ properties:
+ reset-gpios: false
+
+ - if:
+ properties:
+ compatible:
+ items:
+ const: yamaha,yas539
+ then:
+ properties:
+ interrupts: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c-0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@2e {
+ compatible = "yamaha,yas530";
+ reg = <0x2e>;
+ vdd-supply = <&ldo1_reg>;
+ iovdd-supply = <&ldo2_reg>;
+ reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ i2c-1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@2e {
+ compatible = "yamaha,yas539";
+ reg = <0x2e>;
+ vdd-supply = <&ldo1_reg>;
+ };
+ };