summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/input
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/input')
-rw-r--r--Documentation/devicetree/bindings/input/adc-joystick.yaml127
-rw-r--r--Documentation/devicetree/bindings/input/adc-keys.yaml103
-rw-r--r--Documentation/devicetree/bindings/input/adi,adp5588.yaml111
-rw-r--r--Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml117
-rw-r--r--Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml58
-rw-r--r--Documentation/devicetree/bindings/input/atmel,captouch.txt36
-rw-r--r--Documentation/devicetree/bindings/input/atmel,maxtouch.yaml113
-rw-r--r--Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml950
-rw-r--r--Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt107
-rw-r--r--Documentation/devicetree/bindings/input/clps711x-keypad.txt27
-rw-r--r--Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt20
-rw-r--r--Documentation/devicetree/bindings/input/cypress,cyapa.txt42
-rw-r--r--Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml73
-rw-r--r--Documentation/devicetree/bindings/input/cypress-sf.yaml61
-rw-r--r--Documentation/devicetree/bindings/input/da9062-onkey.txt47
-rw-r--r--Documentation/devicetree/bindings/input/dlg,da7280.txt108
-rw-r--r--Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt21
-rw-r--r--Documentation/devicetree/bindings/input/e3x0-button.txt23
-rw-r--r--Documentation/devicetree/bindings/input/elan,ekth3000.yaml81
-rw-r--r--Documentation/devicetree/bindings/input/elan,ekth6915.yaml65
-rw-r--r--Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml90
-rw-r--r--Documentation/devicetree/bindings/input/fsl,scu-key.yaml40
-rw-r--r--Documentation/devicetree/bindings/input/goodix,gt7375p.yaml68
-rw-r--r--Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml140
-rw-r--r--Documentation/devicetree/bindings/input/gpio-beeper.txt13
-rw-r--r--Documentation/devicetree/bindings/input/gpio-decoder.txt23
-rw-r--r--Documentation/devicetree/bindings/input/gpio-keys.yaml142
-rw-r--r--Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt49
-rw-r--r--Documentation/devicetree/bindings/input/gpio-mouse.txt32
-rw-r--r--Documentation/devicetree/bindings/input/gpio-vibrator.yaml39
-rw-r--r--Documentation/devicetree/bindings/input/hid-over-i2c.yaml83
-rw-r--r--Documentation/devicetree/bindings/input/ibm,op-panel.yaml50
-rw-r--r--Documentation/devicetree/bindings/input/imx-keypad.yaml85
-rw-r--r--Documentation/devicetree/bindings/input/input-reset.txt33
-rw-r--r--Documentation/devicetree/bindings/input/input.yaml64
-rw-r--r--Documentation/devicetree/bindings/input/iqs269a.yaml552
-rw-r--r--Documentation/devicetree/bindings/input/iqs626a.yaml838
-rw-r--r--Documentation/devicetree/bindings/input/iqs62x-keys.yaml132
-rw-r--r--Documentation/devicetree/bindings/input/lpc32xx-key.txt34
-rw-r--r--Documentation/devicetree/bindings/input/matrix-keymap.txt1
-rw-r--r--Documentation/devicetree/bindings/input/matrix-keymap.yaml48
-rw-r--r--Documentation/devicetree/bindings/input/max77650-onkey.yaml38
-rw-r--r--Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml83
-rw-r--r--Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml114
-rw-r--r--Documentation/devicetree/bindings/input/microchip,cap11xx.yaml149
-rw-r--r--Documentation/devicetree/bindings/input/microchip,qt1050.txt78
-rw-r--r--Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt55
-rw-r--r--Documentation/devicetree/bindings/input/omap-keypad.txt28
-rw-r--r--Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml66
-rw-r--r--Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt16
-rw-r--r--Documentation/devicetree/bindings/input/pwm-beeper.txt24
-rw-r--r--Documentation/devicetree/bindings/input/pwm-vibrator.yaml57
-rw-r--r--Documentation/devicetree/bindings/input/pxa27x-keypad.txt60
-rw-r--r--Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml51
-rw-r--r--Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt90
-rw-r--r--Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt46
-rw-r--r--Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml38
-rw-r--r--Documentation/devicetree/bindings/input/raydium_i2c_ts.txt19
-rw-r--r--Documentation/devicetree/bindings/input/regulator-haptic.yaml43
-rw-r--r--Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt56
-rw-r--r--Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt39
-rw-r--r--Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt61
-rw-r--r--Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt56
-rw-r--r--Documentation/devicetree/bindings/input/rotary-encoder.txt50
-rw-r--r--Documentation/devicetree/bindings/input/samsung-keypad.txt77
-rw-r--r--Documentation/devicetree/bindings/input/snvs-pwrkey.txt1
-rw-r--r--Documentation/devicetree/bindings/input/spear-keyboard.txt20
-rw-r--r--Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml48
-rw-r--r--Documentation/devicetree/bindings/input/st-keyscan.txt60
-rw-r--r--Documentation/devicetree/bindings/input/stmpe-keypad.txt41
-rw-r--r--Documentation/devicetree/bindings/input/tca8418_keypad.txt10
-rw-r--r--Documentation/devicetree/bindings/input/ti,drv260x.txt50
-rw-r--r--Documentation/devicetree/bindings/input/ti,drv2665.txt17
-rw-r--r--Documentation/devicetree/bindings/input/ti,drv2667.txt17
-rw-r--r--Documentation/devicetree/bindings/input/ti,nspire-keypad.txt60
-rw-r--r--Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt35
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ad7879.txt71
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ads7846.txt106
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ar1021.txt15
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt30
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml75
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt87
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/bu21013.txt43
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/bu21029.txt35
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml62
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt34
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml72
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml148
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml129
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml58
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/eeti.txt30
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt18
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt25
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml74
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt34
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/goodix.yaml81
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/hideep.txt41
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml119
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml76
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml74
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt38
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt16
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt17
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml87
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt20
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml69
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml68
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt26
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml86
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt32
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml91
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt31
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml50
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt41
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/stmpe.txt108
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/sx8654.txt23
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml76
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml128
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt1
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml89
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt11
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt39
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/zet6223.txt30
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt34
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml115
-rw-r--r--Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt30
-rw-r--r--Documentation/devicetree/bindings/input/twl4030-keypad.txt27
-rw-r--r--Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt21
-rw-r--r--Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt22
129 files changed, 9562 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
new file mode 100644
index 000000000..da0f8dfca
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ADC attached joystick
+
+maintainers:
+ - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+ Bindings for joystick devices connected to ADC controllers supporting
+ the Industrial I/O subsystem.
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ const: adc-joystick
+
+ io-channels:
+ minItems: 1
+ maxItems: 1024
+ description: >
+ List of phandle and IIO specifier pairs.
+ Each pair defines one ADC channel to which a joystick axis is connected.
+ See
+ https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
+ for details.
+
+ poll-interval: true
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+required:
+ - compatible
+ - io-channels
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+patternProperties:
+ "^axis@[0-9a-f]+$":
+ type: object
+ $ref: input.yaml#
+ description: >
+ Represents a joystick axis bound to the given ADC channel.
+ For each entry in the io-channels list, one axis subnode with a matching
+ reg property must be specified.
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 1023
+ description: Index of an io-channels list entry bound to this axis.
+
+ linux,code:
+ description: EV_ABS specific event code generated by the axis.
+
+ abs-range:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: minimum value
+ - description: maximum value
+ description: >
+ Minimum and maximum values produced by the axis.
+ For an ABS_X axis this will be the left-most and right-most
+ inclination of the joystick. If min > max, it is left to userspace to
+ treat the axis as inverted.
+ This property is interpreted as two signed 32 bit values.
+
+ abs-fuzz:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ Amount of noise in the input value.
+ Omitting this property indicates the axis is precise.
+
+ abs-flat:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ Axial "deadzone", or area around the center position, where the axis
+ is considered to be at rest.
+ Omitting this property indicates the axis always returns to exactly
+ the center position.
+
+ required:
+ - reg
+ - linux,code
+ - abs-range
+
+ additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/iio/adc/ingenic,adc.h>
+ #include <dt-bindings/input/input.h>
+
+ joystick: adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&adc INGENIC_ADC_TOUCH_XP>,
+ <&adc INGENIC_ADC_TOUCH_YP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ linux,code = <ABS_X>;
+ abs-range = <3300 0>;
+ abs-fuzz = <4>;
+ abs-flat = <200>;
+ };
+ axis@1 {
+ reg = <1>;
+ linux,code = <ABS_Y>;
+ abs-range = <0 3300>;
+ abs-fuzz = <4>;
+ abs-flat = <200>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/adc-keys.yaml b/Documentation/devicetree/bindings/input/adc-keys.yaml
new file mode 100644
index 000000000..7aa078dea
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-keys.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adc-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC attached resistor ladder buttons
+
+maintainers:
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ const: adc-keys
+
+ io-channels:
+ maxItems: 1
+
+ io-channel-names:
+ const: buttons
+
+ keyup-threshold-microvolt:
+ description:
+ Voltage above or equal to which all the keys are considered up.
+
+ poll-interval: true
+ autorepeat: true
+
+patternProperties:
+ '^button-':
+ type: object
+ $ref: input.yaml#
+ additionalProperties: false
+ description:
+ Each button (key) is represented as a sub-node.
+
+ properties:
+ label: true
+
+ linux,code: true
+
+ press-threshold-microvolt:
+ description:
+ Voltage above or equal to which this key is considered pressed. No
+ two values of press-threshold-microvolt may be the same. All values
+ of press-threshold-microvolt must be less than
+ keyup-threshold-microvolt.
+
+ required:
+ - linux,code
+ - press-threshold-microvolt
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+ - keyup-threshold-microvolt
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ // +--------------------------------+------------------------+
+ // | 2.000.000 <= value | no key pressed |
+ // +--------------------------------+------------------------+
+ // | 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed |
+ // +--------------------------------+------------------------+
+ // | 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed |
+ // +--------------------------------+------------------------+
+ // | 500.000 <= value < 1.000.000 | KEY_ENTER pressed |
+ // +--------------------------------+------------------------+
+ // | value < 500.000 | no key pressed |
+ // +--------------------------------+------------------------+
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&lradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <2000000>;
+
+ button-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <1500000>;
+ };
+
+ button-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <1000000>;
+ };
+
+ button-enter {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ press-threshold-microvolt = <500000>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
new file mode 100644
index 000000000..26ea66834
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adi,adp5588.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5588 Keypad Controller
+
+maintainers:
+ - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+ Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
+
+allOf:
+ - $ref: matrix-keymap.yaml#
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,adp5587
+ - adi,adp5588
+
+ reg:
+ maxItems: 1
+
+ vcc-supply:
+ description: Supply Voltage Input
+
+ reset-gpios:
+ description:
+ If specified, it will be asserted during driver probe. As the line is
+ active low, it should be marked GPIO_ACTIVE_LOW.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller:
+ description:
+ This property applies if either keypad,num-rows lower than 8 or
+ keypad,num-columns lower than 10.
+
+ '#gpio-cells':
+ const: 2
+
+ interrupt-controller:
+ description:
+ This property applies if either keypad,num-rows lower than 8 or
+ keypad,num-columns lower than 10.
+
+ '#interrupt-cells':
+ const: 2
+
+ adi,unlock-keys:
+ description:
+ Specifies a maximum of 2 keys that can be used to unlock the keypad.
+ If this property is set, the keyboard will be locked and only unlocked
+ after these keys are pressed. If only one key is set, a double click is
+ needed to unlock the keypad. The value of this property cannot be bigger
+ or equal than keypad,num-rows * keypad,num-columns.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - keypad,num-rows
+ - keypad,num-columns
+ - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ keys@34 {
+ compatible = "adi,adp5588";
+ reg = <0x34>;
+
+ vcc-supply = <&vcc>;
+ interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+ reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+
+ keypad,num-rows = <1>;
+ keypad,num-columns = <9>;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x00, KEY_1)
+ MATRIX_KEY(0x00, 0x01, KEY_2)
+ MATRIX_KEY(0x00, 0x02, KEY_3)
+ MATRIX_KEY(0x00, 0x03, KEY_4)
+ MATRIX_KEY(0x00, 0x04, KEY_5)
+ MATRIX_KEY(0x00, 0x05, KEY_6)
+ MATRIX_KEY(0x00, 0x06, KEY_7)
+ MATRIX_KEY(0x00, 0x07, KEY_8)
+ MATRIX_KEY(0x00, 0x08, KEY_9)
+ >;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
new file mode 100644
index 000000000..5d631f713
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/allwinner,sun4i-a10-lradc-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 LRADC
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: allwinner,sun4i-a10-lradc-keys
+ - const: allwinner,sun8i-a83t-r-lradc
+ - items:
+ - const: allwinner,sun50i-a64-lradc
+ - const: allwinner,sun8i-a83t-r-lradc
+ - const: allwinner,sun50i-r329-lradc
+ - items:
+ - const: allwinner,sun20i-d1-lradc
+ - const: allwinner,sun50i-r329-lradc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vref-supply:
+ description:
+ Regulator for the LRADC reference voltage
+
+ wakeup-source: true
+
+patternProperties:
+ "^button-[0-9]+$":
+ type: object
+ $ref: input.yaml#
+ properties:
+ label:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Descriptive name of the key
+
+ linux,code: true
+
+ channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: ADC Channel this key is attached to
+
+ voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Voltage in microvolts at LRADC input when this key is
+ pressed
+
+ required:
+ - label
+ - linux,code
+ - channel
+ - voltage
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vref-supply
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun50i-r329-lradc
+
+then:
+ required:
+ - clocks
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ lradc: lradc@1c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ vref-supply = <&reg_vcc3v0>;
+
+ button-191 {
+ label = "Volume Up";
+ linux,code = <115>;
+ channel = <0>;
+ voltage = <191274>;
+ };
+
+ button-392 {
+ label = "Volume Down";
+ linux,code = <114>;
+ channel = <0>;
+ voltage = <392644>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
new file mode 100644
index 000000000..442f623bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ariel-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dell Wyse 3020 a.k.a. "Ariel" Power Button
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+ The ENE Embedded Controller on the Ariel board has an interface to the
+ SPI bus that is capable of sending keyboard and mouse data. A single
+ power button is attached to it. This binding describes this
+ configuration.
+
+allOf:
+ - $ref: input.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: dell,wyse-ariel-ec-input
+ - const: ene,kb3930-input
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ spi-max-frequency: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-button@0 {
+ compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input";
+ reg = <0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <60 IRQ_TYPE_EDGE_RISING>;
+ spi-max-frequency = <33000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.txt b/Documentation/devicetree/bindings/input/atmel,captouch.txt
new file mode 100644
index 000000000..fe9ee5c53
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,captouch.txt
@@ -0,0 +1,36 @@
+Device tree bindings for Atmel capacitive touch device, typically
+an Atmel touch sensor connected to AtmegaXX MCU running firmware
+based on Qtouch library.
+
+The node for this device must be a child of a I2C controller node, as the
+device communicates via I2C.
+
+Required properties:
+
+ compatible: Must be "atmel,captouch".
+ reg: The I2C slave address of the device.
+ interrupts: Property describing the interrupt line the device
+ is connected to. The device only has one interrupt
+ source.
+ linux,keycodes: Specifies an array of numeric keycode values to
+ be used for reporting button presses. The array can
+ contain up to 8 entries.
+
+Optional properties:
+
+ autorepeat: Enables the Linux input system's autorepeat
+ feature on the input device.
+
+Example:
+
+ atmel-captouch@51 {
+ compatible = "atmel,captouch";
+ reg = <0x51>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+ linux,keycodes = <BTN_0>, <BTN_1>,
+ <BTN_2>, <BTN_3>,
+ <BTN_4>, <BTN_5>,
+ <BTN_6>, <BTN_7>;
+ autorepeat;
+ };
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
new file mode 100644
index 000000000..3ec579d63
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/atmel,maxtouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel maXTouch touchscreen/touchpad
+
+maintainers:
+ - Nick Dyer <nick@shmanahar.org>
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ Atmel maXTouch touchscreen or touchpads such as the mXT244
+ and similar devices.
+
+properties:
+ compatible:
+ const: atmel,maxtouch
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdda-supply:
+ description:
+ Optional regulator for the AVDD analog voltage.
+
+ vdd-supply:
+ description:
+ Optional regulator for the VDD digital voltage.
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ Optional GPIO specifier for the touchscreen's reset pin
+ (active low). The line must be flagged with
+ GPIO_ACTIVE_LOW.
+
+ wake-gpios:
+ maxItems: 1
+ description:
+ Optional GPIO specifier for the touchscreen's wake pin
+ (active low). The line must be flagged with
+ GPIO_ACTIVE_LOW.
+
+ linux,gpio-keymap:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ When enabled, the SPT_GPIOPWN_T19 object sends messages
+ on GPIO bit changes. An array of up to 8 entries can be provided
+ indicating the Linux keycode mapped to each bit of the status byte,
+ starting at the LSB. Linux keycodes are defined in
+ <dt-bindings/input/input.h>.
+
+ Note: the numbering of the GPIOs and the bit they start at varies
+ between maXTouch devices. You must either refer to the documentation,
+ or experiment to determine which bit corresponds to which input. Use
+ KEY_RESERVED for unused padding values.
+
+ atmel,wakeup-method:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The WAKE line is an active-low input that is used to wake up the touch
+ controller from deep-sleep mode before communication with the controller
+ could be started. This optional feature used to minimize current
+ consumption when the controller is in deep sleep mode. This feature is
+ relevant only to some controller families, like mXT1386 controller for
+ example.
+
+ The WAKE pin can be connected in one of the following ways:
+ 1) left permanently low
+ 2) connected to the I2C-compatible SCL pin
+ 3) connected to a GPIO pin on the host
+ enum:
+ - 0 # ATMEL_MXT_WAKEUP_NONE
+ - 1 # ATMEL_MXT_WAKEUP_I2C_SCL
+ - 2 # ATMEL_MXT_WAKEUP_GPIO
+ default: 0
+
+ wakeup-source:
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/input/atmel-maxtouch.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ vdda-supply = <&ab8500_ldo_aux2_reg>;
+ vdd-supply = <&ab8500_ldo_aux5_reg>;
+ atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
new file mode 100644
index 000000000..9ddba7f2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -0,0 +1,950 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS7222A/B/C Capacitive Touch Controller
+
+maintainers:
+ - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+ The Azoteq IQS7222A, IQS7222B and IQS7222C are multichannel capacitive touch
+ controllers that feature additional sensing capabilities.
+
+ Link to datasheets: https://www.azoteq.com/
+
+properties:
+ compatible:
+ enum:
+ - azoteq,iqs7222a
+ - azoteq,iqs7222b
+ - azoteq,iqs7222c
+
+ reg:
+ maxItems: 1
+
+ irq-gpios:
+ maxItems: 1
+ description:
+ Specifies the GPIO connected to the device's active-low RDY output.
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ Specifies the GPIO connected to the device's active-low MCLR input. The
+ device is temporarily held in hardware reset prior to initialization if
+ this property is present.
+
+ azoteq,max-counts:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the maximum number of conversion periods (counts) that can be
+ reported as follows:
+ 0: 1023
+ 1: 2047
+ 2: 4095
+ 3: 16384
+
+ azoteq,auto-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the number of conversions to occur before an interrupt is
+ generated as follows:
+ 0: 4
+ 1: 8
+ 2: 16
+ 3: 32
+
+ azoteq,ati-frac-div-fine:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+ description: Specifies the preloaded ATI fine fractional divider.
+
+ azoteq,ati-frac-div-coarse:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+ description: Specifies the preloaded ATI coarse fractional divider.
+
+ azoteq,ati-comp-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 1023
+ description: Specifies the preloaded ATI compensation selection.
+
+ azoteq,lta-beta-lp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description:
+ Specifies the long-term average filter damping factor to be applied during
+ low-power mode.
+
+ azoteq,lta-beta-np:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description:
+ Specifies the long-term average filter damping factor to be applied during
+ normal-power mode.
+
+ azoteq,counts-beta-lp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description:
+ Specifies the counts filter damping factor to be applied during low-power
+ mode.
+
+ azoteq,counts-beta-np:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description:
+ Specifies the counts filter damping factor to be applied during normal-
+ power mode.
+
+ azoteq,lta-fast-beta-lp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description:
+ Specifies the long-term average filter fast damping factor to be applied
+ during low-power mode.
+
+ azoteq,lta-fast-beta-np:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description:
+ Specifies the long-term average filter fast damping factor to be applied
+ during normal-power mode.
+
+ azoteq,timeout-ati-ms:
+ multipleOf: 500
+ minimum: 0
+ maximum: 32767500
+ description:
+ Specifies the delay (in ms) before ATI is retried following an ATI error.
+
+ azoteq,rate-ati-ms:
+ minimum: 0
+ maximum: 65535
+ description: Specifies the rate (in ms) at which ATI status is evaluated.
+
+ azoteq,timeout-np-ms:
+ minimum: 0
+ maximum: 65535
+ description:
+ Specifies the length of time (in ms) to wait for an event before moving
+ from normal-power mode to low-power mode.
+
+ azoteq,rate-np-ms:
+ minimum: 0
+ maximum: 3000
+ description: Specifies the report rate (in ms) during normal-power mode.
+
+ azoteq,timeout-lp-ms:
+ minimum: 0
+ maximum: 65535
+ description:
+ Specifies the length of time (in ms) to wait for an event before moving
+ from low-power mode to ultra-low-power mode.
+
+ azoteq,rate-lp-ms:
+ minimum: 0
+ maximum: 3000
+ description: Specifies the report rate (in ms) during low-power mode.
+
+ azoteq,timeout-ulp-ms:
+ minimum: 0
+ maximum: 65535
+ description:
+ Specifies the rate (in ms) at which channels not regularly sampled during
+ ultra-low-power mode are updated.
+
+ azoteq,rate-ulp-ms:
+ minimum: 0
+ maximum: 3000
+ description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+patternProperties:
+ "^cycle-[0-9]$":
+ type: object
+ description: Represents a conversion cycle serving two sensing channels.
+
+ properties:
+ azoteq,conv-period:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ description: Specifies the cycle's conversion period.
+
+ azoteq,conv-frac:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ description: Specifies the cycle's conversion frequency fraction.
+
+ azoteq,tx-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 9
+ items:
+ minimum: 0
+ maximum: 8
+ description: Specifies the CTx pin(s) associated with the cycle.
+
+ azoteq,rx-float-inactive:
+ type: boolean
+ description: Floats any inactive CRx pins instead of grounding them.
+
+ azoteq,dead-time-enable:
+ type: boolean
+ description:
+ Increases the denominator of the conversion frequency formula by one.
+
+ azoteq,tx-freq-fosc:
+ type: boolean
+ description:
+ Fixes the conversion frequency to that of the device's core clock.
+
+ azoteq,vbias-enable:
+ type: boolean
+ description: Enables the bias voltage for use during inductive sensing.
+
+ azoteq,sense-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the cycle's sensing mode as follows:
+ 0: None
+ 1: Self capacitive
+ 2: Mutual capacitive
+ 3: Inductive
+
+ Note that in the case of IQS7222A, cycles 5 and 6 are restricted to
+ Hall-effect sensing.
+
+ azoteq,iref-enable:
+ type: boolean
+ description:
+ Enables the current reference for use during various sensing modes.
+
+ azoteq,iref-level:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description: Specifies the cycle's current reference level.
+
+ azoteq,iref-trim:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description: Specifies the cycle's current reference trim.
+
+ dependencies:
+ azoteq,iref-level: ["azoteq,iref-enable"]
+ azoteq,iref-trim: ["azoteq,iref-enable"]
+
+ additionalProperties: false
+
+ "^channel-([0-9]|1[0-9])$":
+ type: object
+ description:
+ Represents a single sensing channel. A channel is active if defined and
+ inactive otherwise.
+
+ Note that in the case of IQS7222A, channels 10 and 11 are restricted to
+ Hall-effect sensing with events reported on channel 10 only.
+
+ properties:
+ azoteq,ulp-allow:
+ type: boolean
+ description:
+ Permits the device to enter ultra-low-power mode while the channel
+ lies in a state of touch or proximity.
+
+ azoteq,ref-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 9
+ description: Specifies a separate reference channel to be followed.
+
+ azoteq,ref-weight:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 65535
+ description: Specifies the relative weight of the reference channel.
+
+ azoteq,use-prox:
+ type: boolean
+ description:
+ Activates the reference channel in response to proximity events
+ instead of touch events.
+
+ azoteq,ati-band:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the channel's ATI band as a fraction of its ATI target as
+ follows:
+ 0: 1/16
+ 1: 1/8
+ 2: 1/4
+ 3: 1/2
+
+ azoteq,global-halt:
+ type: boolean
+ description:
+ Specifies that the channel's long-term average is to freeze if any
+ other participating channel lies in a proximity or touch state.
+
+ azoteq,invert-enable:
+ type: boolean
+ description:
+ Inverts the polarity of the states reported for proximity and touch
+ events relative to their respective thresholds.
+
+ azoteq,dual-direction:
+ type: boolean
+ description:
+ Specifies that the channel's long-term average is to freeze in the
+ presence of either increasing or decreasing counts, thereby permit-
+ ting events to be reported in either direction.
+
+ azoteq,rx-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ items:
+ minimum: 0
+ maximum: 7
+ description: Specifies the CRx pin(s) associated with the channel.
+
+ azoteq,samp-cap-double:
+ type: boolean
+ description: Doubles the sampling capacitance from 40 pF to 80 pF.
+
+ azoteq,vref-half:
+ type: boolean
+ description: Halves the discharge threshold from 1.0 V to 0.5 V.
+
+ azoteq,proj-bias:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the bias current applied during mutual (projected)
+ capacitive sensing as follows:
+ 0: 2 uA
+ 1: 5 uA
+ 2: 7 uA
+ 3: 10 uA
+
+ azoteq,ati-target:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 8
+ minimum: 0
+ maximum: 2040
+ description: Specifies the channel's ATI target.
+
+ azoteq,ati-base:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 16
+ minimum: 0
+ maximum: 496
+ description: Specifies the channel's ATI base.
+
+ azoteq,ati-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5]
+ description: |
+ Specifies the channel's ATI mode as follows:
+ 0: Disabled
+ 1: Compensation
+ 2: Compensation divider
+ 3: Fine fractional divider
+ 4: Coarse fractional divider
+ 5: Full
+
+ azoteq,ati-frac-div-fine:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+ description: Specifies the channel's ATI fine fractional divider.
+
+ azoteq,ati-frac-mult-coarse:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description: Specifies the channel's ATI coarse fractional multiplier.
+
+ azoteq,ati-frac-div-coarse:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+ description: Specifies the channel's ATI coarse fractional divider.
+
+ azoteq,ati-comp-div:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+ description: Specifies the channel's ATI compensation divider.
+
+ azoteq,ati-comp-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 1023
+ description: Specifies the channel's ATI compensation selection.
+
+ azoteq,debounce-enter:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description: Specifies the channel's debounce entrance factor.
+
+ azoteq,debounce-exit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description: Specifies the channel's debounce exit factor.
+
+ patternProperties:
+ "^event-(prox|touch)$":
+ type: object
+ $ref: input.yaml#
+ description:
+ Represents a proximity or touch event reported by the channel.
+
+ properties:
+ azoteq,gpio-select:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 2
+ description: |
+ Specifies one or more GPIO mapped to the event as follows:
+ 0: GPIO0
+ 1: GPIO3 (IQS7222C only)
+ 2: GPIO4 (IQS7222C only)
+
+ Note that although multiple events can be mapped to a single
+ GPIO, they must all be of the same type (proximity, touch or
+ slider gesture).
+
+ azoteq,thresh:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Specifies the threshold for the event. Valid entries range from
+ 0-127 and 0-255 for proximity and touch events, respectively.
+
+ azoteq,hyst:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ description:
+ Specifies the hysteresis for the event (touch events only).
+
+ azoteq,timeout-press-ms:
+ multipleOf: 500
+ minimum: 0
+ maximum: 127500
+ description:
+ Specifies the length of time (in ms) to wait before automatically
+ releasing a press event. Specify zero to allow the press state to
+ persist indefinitely.
+
+ The IQS7222B does not feature channel-specific timeouts; the time-
+ out specified for any one channel applies to all channels.
+
+ linux,code: true
+
+ linux,input-type:
+ enum: [1, 5]
+ default: 1
+ description:
+ Specifies whether the event is to be interpreted as a key (1)
+ or a switch (5).
+
+ additionalProperties: false
+
+ dependencies:
+ azoteq,ref-weight: ["azoteq,ref-select"]
+ azoteq,use-prox: ["azoteq,ref-select"]
+
+ additionalProperties: false
+
+ "^slider-[0-1]$":
+ type: object
+ description: Represents a slider comprising three or four channels.
+
+ properties:
+ azoteq,channel-select:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 4
+ items:
+ minimum: 0
+ maximum: 9
+ description:
+ Specifies the order of the channels that participate in the slider.
+
+ azoteq,slider-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 65535
+ description:
+ Specifies the slider's one-dimensional resolution, equal to the
+ maximum coordinate plus one.
+
+ azoteq,lower-cal:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ description: Specifies the slider's lower starting point.
+
+ azoteq,upper-cal:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ description: Specifies the slider's upper starting point.
+
+ azoteq,top-speed:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 65535
+ description:
+ Specifies the speed of movement after which coordinate filtering is
+ no longer applied.
+
+ azoteq,bottom-speed:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ description:
+ Specifies the speed of movement after which coordinate filtering is
+ linearly reduced.
+
+ azoteq,bottom-beta:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+ description:
+ Specifies the coordinate filter damping factor to be applied
+ while the speed of movement is below that which is specified
+ by azoteq,bottom-speed.
+
+ azoteq,static-beta:
+ type: boolean
+ description:
+ Applies the coordinate filter damping factor specified by
+ azoteq,bottom-beta regardless of the speed of movement.
+
+ azoteq,use-prox:
+ type: boolean
+ description:
+ Directs the slider to respond to the proximity states of the selected
+ channels instead of their corresponding touch states. Note the slider
+ cannot report granular coordinates during a state of proximity.
+
+ linux,axis:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Specifies the absolute axis to which coordinates are mapped. Specify
+ ABS_WHEEL to operate the slider as a wheel (IQS7222C only).
+
+ patternProperties:
+ "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+ type: object
+ $ref: input.yaml#
+ description:
+ Represents a press or gesture (IQS7222A only) event reported by
+ the slider.
+
+ properties:
+ linux,code: true
+
+ azoteq,gesture-max-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ description:
+ Specifies the length of time (in ms) within which a tap, swipe
+ or flick gesture must be completed in order to be acknowledged
+ by the device. The number specified for any one swipe or flick
+ gesture applies to all remaining swipe or flick gestures.
+
+ azoteq,gesture-min-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 496
+ description:
+ Specifies the length of time (in ms) for which a tap gesture must
+ be held in order to be acknowledged by the device.
+
+ azoteq,gesture-dist:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ description:
+ Specifies the distance across which a swipe or flick gesture must
+ travel in order to be acknowledged by the device. The number spec-
+ ified for any one swipe or flick gesture applies to all remaining
+ swipe or flick gestures.
+
+ azoteq,gpio-select:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 2
+ description: |
+ Specifies one or more GPIO mapped to the event as follows:
+ 0: GPIO0
+ 1: GPIO3 (IQS7222C only)
+ 2: GPIO4 (IQS7222C only)
+
+ Note that although multiple events can be mapped to a single
+ GPIO, they must all be of the same type (proximity, touch or
+ slider gesture).
+
+ additionalProperties: false
+
+ required:
+ - azoteq,channel-select
+
+ additionalProperties: false
+
+ "^gpio-[0-2]$":
+ type: object
+ description: |
+ Represents a GPIO mapped to one or more events as follows:
+ gpio-0: GPIO0
+ gpio-1: GPIO3 (IQS7222C only)
+ gpio-2: GPIO4 (IQS7222C only)
+
+ allOf:
+ - $ref: ../pinctrl/pincfg-node.yaml#
+
+ properties:
+ drive-open-drain: true
+
+ additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: azoteq,iqs7222b
+
+ then:
+ patternProperties:
+ "^cycle-[0-9]$":
+ properties:
+ azoteq,iref-enable: false
+
+ "^channel-([0-9]|1[0-9])$":
+ properties:
+ azoteq,ref-select: false
+
+ patternProperties:
+ "^event-(prox|touch)$":
+ properties:
+ azoteq,gpio-select: false
+
+ "^slider-[0-1]$": false
+
+ "^gpio-[0-2]$": false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: azoteq,iqs7222a
+
+ then:
+ patternProperties:
+ "^channel-([0-9]|1[0-9])$":
+ patternProperties:
+ "^event-(prox|touch)$":
+ properties:
+ azoteq,gpio-select:
+ maxItems: 1
+ items:
+ maximum: 0
+
+ "^slider-[0-1]$":
+ properties:
+ azoteq,slider-size:
+ multipleOf: 16
+ minimum: 16
+ maximum: 4080
+
+ azoteq,top-speed:
+ multipleOf: 4
+ maximum: 1020
+
+ patternProperties:
+ "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+ properties:
+ azoteq,gpio-select:
+ maxItems: 1
+ items:
+ maximum: 0
+
+ else:
+ patternProperties:
+ "^channel-([0-9]|1[0-9])$":
+ properties:
+ azoteq,ulp-allow: false
+
+ "^slider-[0-1]$":
+ patternProperties:
+ "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+ properties:
+ azoteq,gesture-max-ms: false
+
+ azoteq,gesture-min-ms: false
+
+ azoteq,gesture-dist: false
+
+required:
+ - compatible
+ - reg
+ - irq-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ iqs7222a@44 {
+ compatible = "azoteq,iqs7222a";
+ reg = <0x44>;
+ irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ azoteq,lta-beta-lp = <7>;
+ azoteq,lta-beta-np = <8>;
+ azoteq,counts-beta-lp = <2>;
+ azoteq,counts-beta-np = <3>;
+ azoteq,lta-fast-beta-lp = <3>;
+ azoteq,lta-fast-beta-np = <4>;
+
+ cycle-0 {
+ azoteq,conv-period = <5>;
+ azoteq,conv-frac = <127>;
+ azoteq,tx-enable = <1>, <2>, <4>, <5>;
+ azoteq,dead-time-enable;
+ azoteq,sense-mode = <2>;
+ };
+
+ cycle-1 {
+ azoteq,conv-period = <5>;
+ azoteq,conv-frac = <127>;
+ azoteq,tx-enable = <5>;
+ azoteq,dead-time-enable;
+ azoteq,sense-mode = <2>;
+ };
+
+ cycle-2 {
+ azoteq,conv-period = <5>;
+ azoteq,conv-frac = <127>;
+ azoteq,tx-enable = <4>;
+ azoteq,dead-time-enable;
+ azoteq,sense-mode = <2>;
+ };
+
+ cycle-3 {
+ azoteq,conv-period = <5>;
+ azoteq,conv-frac = <127>;
+ azoteq,tx-enable = <2>;
+ azoteq,dead-time-enable;
+ azoteq,sense-mode = <2>;
+ };
+
+ cycle-4 {
+ azoteq,conv-period = <5>;
+ azoteq,conv-frac = <127>;
+ azoteq,tx-enable = <1>;
+ azoteq,dead-time-enable;
+ azoteq,sense-mode = <2>;
+ };
+
+ cycle-5 {
+ azoteq,conv-period = <2>;
+ azoteq,conv-frac = <0>;
+ };
+
+ cycle-6 {
+ azoteq,conv-period = <2>;
+ azoteq,conv-frac = <0>;
+ };
+
+ channel-0 {
+ azoteq,ulp-allow;
+ azoteq,global-halt;
+ azoteq,invert-enable;
+ azoteq,rx-enable = <3>;
+ azoteq,ati-target = <800>;
+ azoteq,ati-base = <208>;
+ azoteq,ati-mode = <5>;
+ };
+
+ channel-1 {
+ azoteq,global-halt;
+ azoteq,invert-enable;
+ azoteq,rx-enable = <3>;
+ azoteq,ati-target = <496>;
+ azoteq,ati-base = <208>;
+ azoteq,ati-mode = <5>;
+ };
+
+ channel-2 {
+ azoteq,global-halt;
+ azoteq,invert-enable;
+ azoteq,rx-enable = <3>;
+ azoteq,ati-target = <496>;
+ azoteq,ati-base = <208>;
+ azoteq,ati-mode = <5>;
+ };
+
+ channel-3 {
+ azoteq,global-halt;
+ azoteq,invert-enable;
+ azoteq,rx-enable = <3>;
+ azoteq,ati-target = <496>;
+ azoteq,ati-base = <208>;
+ azoteq,ati-mode = <5>;
+ };
+
+ channel-4 {
+ azoteq,global-halt;
+ azoteq,invert-enable;
+ azoteq,rx-enable = <3>;
+ azoteq,ati-target = <496>;
+ azoteq,ati-base = <208>;
+ azoteq,ati-mode = <5>;
+ };
+
+ channel-5 {
+ azoteq,ulp-allow;
+ azoteq,global-halt;
+ azoteq,invert-enable;
+ azoteq,rx-enable = <6>;
+ azoteq,ati-target = <800>;
+ azoteq,ati-base = <144>;
+ azoteq,ati-mode = <5>;
+ };
+
+ channel-6 {
+ azoteq,global-halt;
+ azoteq,invert-enable;
+ azoteq,rx-enable = <6>;
+ azoteq,ati-target = <496>;
+ azoteq,ati-base = <160>;
+ azoteq,ati-mode = <5>;
+
+ event-touch {
+ linux,code = <KEY_MUTE>;
+ };
+ };
+
+ channel-7 {
+ azoteq,global-halt;
+ azoteq,invert-enable;
+ azoteq,rx-enable = <6>;
+ azoteq,ati-target = <496>;
+ azoteq,ati-base = <160>;
+ azoteq,ati-mode = <5>;
+
+ event-touch {
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ channel-8 {
+ azoteq,global-halt;
+ azoteq,invert-enable;
+ azoteq,rx-enable = <6>;
+ azoteq,ati-target = <496>;
+ azoteq,ati-base = <160>;
+ azoteq,ati-mode = <5>;
+
+ event-touch {
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ channel-9 {
+ azoteq,global-halt;
+ azoteq,invert-enable;
+ azoteq,rx-enable = <6>;
+ azoteq,ati-target = <496>;
+ azoteq,ati-base = <160>;
+ azoteq,ati-mode = <5>;
+
+ event-touch {
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ channel-10 {
+ azoteq,ulp-allow;
+ azoteq,ati-target = <496>;
+ azoteq,ati-base = <112>;
+
+ event-touch {
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+
+ channel-11 {
+ azoteq,ati-target = <496>;
+ azoteq,ati-base = <112>;
+ };
+
+ slider-0 {
+ azoteq,channel-select = <1>, <2>, <3>, <4>;
+ azoteq,slider-size = <4080>;
+ azoteq,upper-cal = <50>;
+ azoteq,lower-cal = <30>;
+ azoteq,top-speed = <200>;
+ azoteq,bottom-speed = <1>;
+ azoteq,bottom-beta = <3>;
+
+ event-tap {
+ linux,code = <KEY_PLAYPAUSE>;
+ azoteq,gesture-max-ms = <400>;
+ azoteq,gesture-min-ms = <32>;
+ };
+
+ event-flick-pos {
+ linux,code = <KEY_NEXTSONG>;
+ azoteq,gesture-max-ms = <800>;
+ azoteq,gesture-dist = <800>;
+ };
+
+ event-flick-neg {
+ linux,code = <KEY_PREVIOUSSONG>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
new file mode 100644
index 000000000..262deab73
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
@@ -0,0 +1,107 @@
+* Broadcom Keypad Controller device tree bindings
+
+Broadcom Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be "brcm,bcm-keypad"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu.
+
+Board Specific Properties:
+- keypad,num-rows: Number of row lines connected to the keypad
+ controller.
+
+- keypad,num-columns: Number of column lines connected to the
+ keypad controller.
+
+- col-debounce-filter-period: The debounce period for the Column filter.
+
+ KEYPAD_DEBOUNCE_1_ms = 0
+ KEYPAD_DEBOUNCE_2_ms = 1
+ KEYPAD_DEBOUNCE_4_ms = 2
+ KEYPAD_DEBOUNCE_8_ms = 3
+ KEYPAD_DEBOUNCE_16_ms = 4
+ KEYPAD_DEBOUNCE_32_ms = 5
+ KEYPAD_DEBOUNCE_64_ms = 6
+ KEYPAD_DEBOUNCE_128_ms = 7
+
+- status-debounce-filter-period: The debounce period for the Status filter.
+
+ KEYPAD_DEBOUNCE_1_ms = 0
+ KEYPAD_DEBOUNCE_2_ms = 1
+ KEYPAD_DEBOUNCE_4_ms = 2
+ KEYPAD_DEBOUNCE_8_ms = 3
+ KEYPAD_DEBOUNCE_16_ms = 4
+ KEYPAD_DEBOUNCE_32_ms = 5
+ KEYPAD_DEBOUNCE_64_ms = 6
+ KEYPAD_DEBOUNCE_128_ms = 7
+
+- row-output-enabled: An optional property indicating whether the row or
+ column is being used as output. If specified the row is being used
+ as the output. Else defaults to column.
+
+- pull-up-enabled: An optional property indicating the Keypad scan mode.
+ If specified implies the keypad scan pull-up has been enabled.
+
+- autorepeat: Boolean, Enable auto repeat feature of Linux input
+ subsystem (optional).
+
+- linux,keymap: The keymap for keys as described in the binding document
+ devicetree/bindings/input/matrix-keymap.txt.
+
+Example:
+#include "dt-bindings/input/input.h"
+
+/ {
+ keypad: keypad@180ac000 {
+ /* Required SoC specific properties */
+ compatible = "brcm,bcm-keypad";
+
+ /* Required Board specific properties */
+ keypad,num-rows = <5>;
+ keypad,num-columns = <5>;
+
+ linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */
+ MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */
+ MATRIX_KEY(0x00, 0x04, KEY_M) /* key_message */
+ MATRIX_KEY(0x01, 0x00, KEY_A) /* key_contacts */
+ MATRIX_KEY(0x01, 0x01, KEY_1) /* key_1 */
+ MATRIX_KEY(0x01, 0x02, KEY_2) /* key_2 */
+ MATRIX_KEY(0x01, 0x03, KEY_3) /* key_3 */
+ MATRIX_KEY(0x01, 0x04, KEY_S) /* key_speaker */
+ MATRIX_KEY(0x02, 0x00, KEY_P) /* key_phone */
+ MATRIX_KEY(0x02, 0x01, KEY_4) /* key_4 */
+ MATRIX_KEY(0x02, 0x02, KEY_5) /* key_5 */
+ MATRIX_KEY(0x02, 0x03, KEY_6) /* key_6 */
+ MATRIX_KEY(0x02, 0x04, KEY_VOLUMEUP) /* key_vol_up */
+ MATRIX_KEY(0x03, 0x00, KEY_C) /* key_call_log */
+ MATRIX_KEY(0x03, 0x01, KEY_7) /* key_7 */
+ MATRIX_KEY(0x03, 0x02, KEY_8) /* key_8 */
+ MATRIX_KEY(0x03, 0x03, KEY_9) /* key_9 */
+ MATRIX_KEY(0x03, 0x04, KEY_VOLUMEDOWN) /* key_vol_down */
+ MATRIX_KEY(0x04, 0x00, KEY_H) /* key_headset */
+ MATRIX_KEY(0x04, 0x01, KEY_KPASTERISK) /* key_* */
+ MATRIX_KEY(0x04, 0x02, KEY_0) /* key_0 */
+ MATRIX_KEY(0x04, 0x03, KEY_GRAVE) /* key_# */
+ MATRIX_KEY(0x04, 0x04, KEY_MUTE) /* key_mute */
+ >;
+
+ /* Optional board specific properties */
+ col-debounce-filter-period = <5>;
+ row-output-enabled;
+ pull-up-enabled;
+
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/clps711x-keypad.txt b/Documentation/devicetree/bindings/input/clps711x-keypad.txt
new file mode 100644
index 000000000..3eed8819d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/clps711x-keypad.txt
@@ -0,0 +1,27 @@
+* Cirrus Logic CLPS711X matrix keypad device tree bindings
+
+Required Properties:
+- compatible: Shall contain "cirrus,ep7209-keypad".
+- row-gpios: List of GPIOs used as row lines.
+- poll-interval: Poll interval time in milliseconds.
+- linux,keymap: The definition can be found at
+ bindings/input/matrix-keymap.txt.
+
+Optional Properties:
+- autorepeat: Enable autorepeat feature.
+
+Example:
+ keypad {
+ compatible = "cirrus,ep7312-keypad", "cirrus,ep7209-keypad";
+ autorepeat;
+ poll-interval = <120>;
+ row-gpios = <&porta 0 0>,
+ <&porta 1 0>;
+
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_UP)
+ MATRIX_KEY(0, 1, KEY_DOWN)
+ MATRIX_KEY(1, 0, KEY_LEFT)
+ MATRIX_KEY(1, 1, KEY_RIGHT)
+ >;
+ };
diff --git a/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt b/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
new file mode 100644
index 000000000..0dd0076da
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
@@ -0,0 +1,20 @@
+Motorola CPCAP on key
+
+This module is part of the CPCAP. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+ - "motorola,cpcap-pwrbutton"
+- interrupts: irq specifier for CPCAP's ON IRQ
+
+Example:
+
+&cpcap {
+ cpcap_pwrbutton: pwrbutton {
+ compatible = "motorola,cpcap-pwrbutton";
+ interrupts = <23 IRQ_TYPE_NONE>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
new file mode 100644
index 000000000..d3db65916
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
@@ -0,0 +1,42 @@
+Cypress I2C Touchpad
+
+Required properties:
+- compatible: must be "cypress,cyapa".
+- reg: I2C address of the chip.
+- interrupts: interrupt to which the chip is connected (see interrupt
+ binding[0]).
+
+Optional properties:
+- wakeup-source: touchpad can be used as a wakeup source.
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the device (see
+ pinctrl binding [1]).
+- vcc-supply: a phandle for the regulator supplying 3.3V power.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+ &i2c0 {
+ /* ... */
+
+ /* Cypress Gen3 touchpad */
+ touchpad@67 {
+ compatible = "cypress,cyapa";
+ reg = <0x67>;
+ interrupt-parent = <&gpio>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
+ wakeup-source;
+ };
+
+ /* Cypress Gen5 and later touchpad */
+ touchpad@24 {
+ compatible = "cypress,cyapa";
+ reg = <0x24>;
+ interrupt-parent = <&gpio>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
+ wakeup-source;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml
new file mode 100644
index 000000000..52dca8b64
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress,tm2-touchkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung TM2 touch key controller
+
+maintainers:
+ - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+ Touch key controllers similar to the TM2 can be found in a wide range of
+ Samsung devices. They are implemented using many different MCUs, but use
+ a similar I2C protocol.
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ enum:
+ - cypress,tm2-touchkey
+ - cypress,midas-touchkey
+ - cypress,aries-touchkey
+ - coreriver,tc360-touchkey
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Optional regulator for LED voltage, 3.3V.
+
+ vcc-supply:
+ description: Optional regulator for MCU, 1.8V-3.3V (depending on MCU).
+
+ vddio-supply:
+ description: |
+ Optional regulator that provides digital I/O voltage,
+ e.g. for pulling up the interrupt line or the I2C pins.
+
+ linux,keycodes:
+ minItems: 1
+ maxItems: 4
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey@20 {
+ compatible = "cypress,tm2-touchkey";
+ reg = <0x20>;
+ interrupt-parent = <&gpa3>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ vcc-supply = <&ldo32_reg>;
+ vdd-supply = <&ldo33_reg>;
+ linux,keycodes = <KEY_MENU KEY_BACK>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/cypress-sf.yaml b/Documentation/devicetree/bindings/input/cypress-sf.yaml
new file mode 100644
index 000000000..c0b051466
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress-sf.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress-sf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress StreetFighter touchkey controller
+
+maintainers:
+ - Yassine Oudjana <y.oudjana@protonmail.com>
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ const: cypress,sf3155
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ avdd-supply:
+ description: Regulator for AVDD analog voltage
+
+ vdd-supply:
+ description: Regulator for VDD digital voltage
+
+ linux,keycodes:
+ minItems: 1
+ maxItems: 8
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - avdd-supply
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey@28 {
+ compatible = "cypress,sf3155";
+ reg = <0x28>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+ avdd-supply = <&vreg_l6a_1p8>;
+ vdd-supply = <&vdd_3v2_tp>;
+ linux,keycodes = <KEY_BACK KEY_MENU>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt
new file mode 100644
index 000000000..e5eef59a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/da9062-onkey.txt
@@ -0,0 +1,47 @@
+* Dialog DA9061/62/63 OnKey Module
+
+This module is part of the DA9061/DA9062/DA9063. For more details about entire
+DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
+For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+
+This module provides the KEY_POWER event.
+
+Required properties:
+
+- compatible: should be one of the following valid compatible string lines:
+ "dlg,da9061-onkey", "dlg,da9062-onkey"
+ "dlg,da9062-onkey"
+ "dlg,da9063-onkey"
+
+Optional properties:
+
+- dlg,disable-key-power : Disable power-down using a long key-press. If this
+ entry exists the OnKey driver will remove support for the KEY_POWER key
+ press when triggered using a long press of the OnKey.
+
+Example: DA9063
+
+ pmic0: da9063@58 {
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ dlg,disable-key-power;
+ };
+ };
+
+Example: DA9062
+
+ pmic0: da9062@58 {
+ onkey {
+ compatible = "dlg,da9062-onkey";
+ dlg,disable-key-power;
+ };
+ };
+
+Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
+
+ pmic0: da9061@58 {
+ onkey {
+ compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
+ dlg,disable-key-power;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/dlg,da7280.txt b/Documentation/devicetree/bindings/input/dlg,da7280.txt
new file mode 100644
index 000000000..96ee5d50e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlg,da7280.txt
@@ -0,0 +1,108 @@
+Dialog Semiconductor DA7280 Haptics bindings
+
+Required properties:
+- compatible: Should be "dlg,da7280".
+- reg: Specifies the I2C slave address.
+
+- interrupt-parent : Specifies the phandle of the interrupt controller to
+ which the IRQs from DA7280 are delivered to.
+
+- dlg,actuator-type: Set Actuator type. it should be one of:
+ "LRA" - Linear Resonance Actuator type.
+ "ERM-bar" - Bar type Eccentric Rotating Mass.
+ "ERM-coin" - Coin type Eccentric Rotating Mass.
+
+- dlg,const-op-mode: Haptic operation mode for FF_CONSTANT.
+ Possible values:
+ 1 - Direct register override(DRO) mode triggered by i2c(default),
+ 2 - PWM data source mode controlled by PWM duty,
+- dlg,periodic-op-mode: Haptic operation mode for FF_PERIODIC.
+ Possible values:
+ 1 - Register triggered waveform memory(RTWM) mode, the pattern
+ assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP,
+ 2 - Edge triggered waveform memory(ETWM) mode, external GPI(N)
+ control are required to enable/disable and it needs to keep
+ device enabled by sending magnitude (X > 0),
+ the pattern is assigned to the GPI(N)_SEQUENCE_ID below.
+ The default value is 1 for both of the operation modes.
+ For more details, please see the datasheet.
+
+- dlg,nom-microvolt: Nominal actuator voltage rating.
+ Valid values: 0 - 6000000.
+- dlg,abs-max-microvolt: Absolute actuator maximum voltage rating.
+ Valid values: 0 - 6000000.
+- dlg,imax-microamp: Actuator max current rating.
+ Valid values: 0 - 252000.
+ Default: 130000.
+- dlg,impd-micro-ohms: the impedance of the actuator in micro ohms.
+ Valid values: 0 - 1500000000.
+
+Optional properties:
+- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
+ PWM properties should be named "pwms". And number of cell is different
+ for each pwm device.
+ (See Documentation/devicetree/bindings/pwm/pwm.txt
+ for further information relating to pwm properties)
+
+- dlg,ps-seq-id: the PS_SEQ_ID(pattern ID in waveform memory inside chip)
+ to play back when RTWM-MODE is enabled.
+ Valid range: 0 - 15.
+- dlg,ps-seq-loop: the PS_SEQ_LOOP, Number of times the pre-stored sequence
+ pointed to by PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated.
+ Valid range: 0 - 15.
+- dlg,gpiN-seq-id: the GPI(N)_SEQUENCE_ID, pattern to play
+ when gpi0 is triggered, 'N' must be 0 - 2.
+ Valid range: 0 - 15.
+- dlg,gpiN-mode: the pattern mode which can select either
+ "Single-pattern" or "Multi-pattern", 'N' must be 0 - 2.
+- dlg,gpiN-polarity: gpiN polarity which can be chosen among
+ "Rising-edge", "Falling-edge" and "Both-edge",
+ 'N' must be 0 - 2
+ Haptic will work by this edge option in case of ETWM mode.
+
+- dlg,resonant-freq-hz: use in case of LRA.
+ the frequency range: 50 - 300.
+ Default: 205.
+
+- dlg,bemf-sens-enable: Enable for internal loop computations.
+- dlg,freq-track-enable: Enable for resonant frequency tracking.
+- dlg,acc-enable: Enable for active acceleration.
+- dlg,rapid-stop-enable: Enable for rapid stop.
+- dlg,amp-pid-enable: Enable for the amplitude PID.
+- dlg,mem-array: Customized waveform memory(patterns) data downloaded to
+ the device during initialization. This is an array of 100 values(u8).
+
+For further information, see device datasheet.
+
+======
+
+Example:
+
+ haptics: da7280-haptics@4a {
+ compatible = "dlg,da7280";
+ reg = <0x4a>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ dlg,actuator-type = "LRA";
+ dlg,dlg,const-op-mode = <1>;
+ dlg,dlg,periodic-op-mode = <1>;
+ dlg,nom-microvolt = <2000000>;
+ dlg,abs-max-microvolt = <2000000>;
+ dlg,imax-microamp = <170000>;
+ dlg,resonant-freq-hz = <180>;
+ dlg,impd-micro-ohms = <10500000>;
+ dlg,freq-track-enable;
+ dlg,rapid-stop-enable;
+ dlg,mem-array = <
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ >;
+ };
diff --git a/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt
new file mode 100644
index 000000000..10dec1c57
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt
@@ -0,0 +1,21 @@
+* D-Link DIR-685 Touchkeys
+
+This is a I2C one-off touchkey controller based on the Cypress Semiconductor
+CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
+board inside the router is named E119921.
+
+The touchkey device node should be placed inside an I2C bus node.
+
+Required properties:
+- compatible: must be "dlink,dir685-touchkeys"
+- reg: the I2C address of the touchkeys
+- interrupts: reference to the interrupt number
+
+Example:
+
+touchkeys@26 {
+ compatible = "dlink,dir685-touchkeys";
+ reg = <0x26>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/input/e3x0-button.txt b/Documentation/devicetree/bindings/input/e3x0-button.txt
new file mode 100644
index 000000000..907b195f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/e3x0-button.txt
@@ -0,0 +1,23 @@
+National Instruments Ettus Research USRP E3x0 button driver
+
+This module is part of the NI Ettus Research USRP E3x0 SDR.
+
+This module provides a simple power button event via two interrupts.
+
+Required properties:
+- compatible: should be one of the following
+ - "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0
+- interrupts: should be one of the following
+ - <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0
+- interrupt-names: should be one of the following
+ - "press", "release": For devices such as the NI Ettus Research USRP E3x0
+
+Note: Interrupt numbers might vary depending on the FPGA configuration.
+
+Example:
+ button {
+ compatible = "ettus,e3x0-button";
+ interrupt-parent = <&intc>;
+ interrupts = <0 30 1>, <0 31 1>;
+ interrupt-names = "press", "release";
+ }
diff --git a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
new file mode 100644
index 000000000..2a9bb6ace
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth3000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elantech I2C Touchpad
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+ - $ref: touchscreen/touchscreen.yaml#
+
+properties:
+ compatible:
+ const: elan,ekth3000
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source:
+ type: boolean
+ description: touchpad can be used as a wakeup source
+
+ vcc-supply:
+ description: a phandle for the regulator supplying 3.3V power
+
+ elan,trackpoint:
+ type: boolean
+ description: touchpad can support a trackpoint
+
+ elan,clickpad:
+ type: boolean
+ description: touchpad is a clickpad (the entire surface is a button)
+
+ elan,middle-button:
+ type: boolean
+ description: touchpad has a physical middle button
+
+ elan,x_traces:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: number of antennas on the x axis
+
+ elan,y_traces:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: number of antennas on the y axis
+
+ touchscreen-size-x: true
+
+ touchscreen-size-y: true
+
+ touchscreen-x-mm: true
+
+ touchscreen-y-mm: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchpad@15 {
+ compatible = "elan,ekth3000";
+ reg = <0x15>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
new file mode 100644
index 000000000..05e6f2df6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth6915.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTH6915 touchscreen controller
+
+maintainers:
+ - Douglas Anderson <dianders@chromium.org>
+
+description:
+ Supports the Elan eKTH6915 touchscreen controller.
+ This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+properties:
+ compatible:
+ items:
+ - const: elan,ekth6915
+
+ reg:
+ const: 0x10
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
+
+ vcc33-supply:
+ description: The 3.3V supply to the touchscreen.
+
+ vccio-supply:
+ description:
+ The IO supply to the touchscreen. Need not be specified if this is the
+ same as the 3.3V supply.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vcc33-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "elan,ekth6915";
+ reg = <0x10>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ vcc33-supply = <&pp3300_ts>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
new file mode 100644
index 000000000..5139af287
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,mpr121-touchkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MPR121 capacitive touch sensor controller
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+description: |
+ The MPR121 supports up to 12 completely independent electrodes/capacitance
+ sensing inputs in which 8 are multifunctional for LED driving and GPIO.
+ https://www.nxp.com/docs/en/data-sheet/MPR121.pdf
+
+allOf:
+ - $ref: input.yaml#
+
+anyOf:
+ - required: [ interrupts ]
+ - required: [ poll-interval ]
+
+properties:
+ compatible:
+ const: fsl,mpr121-touchkey
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply: true
+
+ linux,keycodes:
+ minItems: 1
+ maxItems: 12
+
+ wakeup-source:
+ description: Use any event on keypad as wakeup event.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - linux,keycodes
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ // Example with interrupts
+ #include "dt-bindings/input/input.h"
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey@5a {
+ compatible = "fsl,mpr121-touchkey";
+ reg = <0x5a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 2>;
+ autorepeat;
+ vdd-supply = <&ldo4_reg>;
+ linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
+ <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>,
+ <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
+ };
+ };
+
+ - |
+ // Example with polling
+ #include "dt-bindings/input/input.h"
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey@5a {
+ compatible = "fsl,mpr121-touchkey";
+ reg = <0x5a>;
+ poll-interval = <20>;
+ autorepeat;
+ vdd-supply = <&ldo4_reg>;
+ linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
+ <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>,
+ <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/fsl,scu-key.yaml b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
new file mode 100644
index 000000000..e6266d188
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - SCU key bindings based on SCU Message Protocol
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: fsl,imx8qxp-sc-key
+ - const: fsl,imx-sc-key
+
+ linux,keycodes:
+ maxItems: 1
+
+required:
+ - compatible
+ - linux,keycodes
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+
+ keys {
+ compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+ linux,keycodes = <KEY_POWER>;
+ };
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
new file mode 100644
index 000000000..1c191bc5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/goodix,gt7375p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT7375P touchscreen
+
+maintainers:
+ - Douglas Anderson <dianders@chromium.org>
+
+description:
+ Supports the Goodix GT7375P touchscreen.
+ This touchscreen uses the i2c-hid protocol but has some non-standard
+ power sequencing required.
+
+properties:
+ compatible:
+ oneOf:
+ - const: goodix,gt7375p
+ - items:
+ - const: goodix,gt7986u
+ - const: goodix,gt7375p
+
+ reg:
+ enum:
+ - 0x5d
+ - 0x14
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ true
+
+ vdd-supply:
+ description: The 3.3V supply to the touchscreen.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ap_ts: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&pp3300_ts>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
new file mode 100644
index 000000000..e05690b3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/google,cros-ec-keyb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC Keyboard
+
+maintainers:
+ - Simon Glass <sjg@chromium.org>
+ - Benson Leung <bleung@chromium.org>
+
+description: |
+ Google's ChromeOS EC Keyboard is a simple matrix keyboard
+ implemented on a separate EC (Embedded Controller) device. It provides
+ a message for reading key scans from the EC. These are then converted
+ into keycodes for processing by the kernel. This device also supports
+ switches/buttons like power and volume buttons.
+
+properties:
+ compatible:
+ oneOf:
+ - description: ChromeOS EC with only buttons/switches
+ const: google,cros-ec-keyb-switches
+ - description: ChromeOS EC with keyboard and possibly buttons/switches
+ const: google,cros-ec-keyb
+
+ google,needs-ghost-filter:
+ description:
+ Enable a ghost filter for the matrix keyboard. This is recommended
+ if the EC does not have its own logic or hardware for this.
+ type: boolean
+
+ function-row-physmap:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 15
+ description: |
+ An ordered u32 array describing the rows/columns (in the scan matrix)
+ of top row keys from physical left (KEY_F1) to right. Each entry
+ encodes the row/column as:
+ (((row) & 0xFF) << 24) | (((column) & 0xFF) << 16)
+ where the lower 16 bits are reserved. This property is specified only
+ when the keyboard has a custom design for the top row keys.
+
+dependencies:
+ function-row-phsymap: [ 'linux,keymap' ]
+ google,needs-ghost-filter: [ 'linux,keymap' ]
+
+required:
+ - compatible
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: google,cros-ec-keyb
+then:
+ $ref: "/schemas/input/matrix-keymap.yaml#"
+ required:
+ - keypad,num-rows
+ - keypad,num-columns
+ - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ keyboard-controller {
+ compatible = "google,cros-ec-keyb";
+ keypad,num-rows = <8>;
+ keypad,num-columns = <13>;
+ google,needs-ghost-filter;
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ /*
+ * Keymap entries take the form of 0xRRCCKKKK where
+ * RR=Row CC=Column KKKK=Key Code
+ * The values below are for a US keyboard layout and
+ * are taken from the Linux driver. Note that the
+ * 102ND key is not used for US keyboards.
+ */
+ linux,keymap = <
+ /* CAPSLCK F1 B F10 */
+ 0x0001003a 0x0002003b 0x00030030 0x00040044
+ /* N = R_ALT ESC */
+ 0x00060031 0x0008000d 0x000a0064 0x01010001
+ /* F4 G F7 H */
+ 0x0102003e 0x01030022 0x01040041 0x01060023
+ /* ' F9 BKSPACE L_CTRL */
+ 0x01080028 0x01090043 0x010b000e 0x0200001d
+ /* TAB F3 T F6 */
+ 0x0201000f 0x0202003d 0x02030014 0x02040040
+ /* ] Y 102ND [ */
+ 0x0205001b 0x02060015 0x02070056 0x0208001a
+ /* F8 GRAVE F2 5 */
+ 0x02090042 0x03010029 0x0302003c 0x03030006
+ /* F5 6 - \ */
+ 0x0304003f 0x03060007 0x0308000c 0x030b002b
+ /* R_CTRL A D F */
+ 0x04000061 0x0401001e 0x04020020 0x04030021
+ /* S K J ; */
+ 0x0404001f 0x04050025 0x04060024 0x04080027
+ /* L ENTER Z C */
+ 0x04090026 0x040b001c 0x0501002c 0x0502002e
+ /* V X , M */
+ 0x0503002f 0x0504002d 0x05050033 0x05060032
+ /* L_SHIFT / . SPACE */
+ 0x0507002a 0x05080035 0x05090034 0x050B0039
+ /* 1 3 4 2 */
+ 0x06010002 0x06020004 0x06030005 0x06040003
+ /* 8 7 0 9 */
+ 0x06050009 0x06060008 0x0608000b 0x0609000a
+ /* L_ALT DOWN RIGHT Q */
+ 0x060a0038 0x060b006c 0x060c006a 0x07010010
+ /* E R W I */
+ 0x07020012 0x07030013 0x07040011 0x07050017
+ /* U R_SHIFT P O */
+ 0x07060016 0x07070036 0x07080019 0x07090018
+ /* UP LEFT */
+ 0x070b0067 0x070c0069>;
+ };
+ - |
+ /* No matrix keyboard, just buttons/switches */
+ keyboard-controller {
+ compatible = "google,cros-ec-keyb-switches";
+ };
+...
diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.txt b/Documentation/devicetree/bindings/input/gpio-beeper.txt
new file mode 100644
index 000000000..a5086e37f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-beeper.txt
@@ -0,0 +1,13 @@
+* GPIO beeper device tree bindings
+
+Register a beeper connected to GPIO pin.
+
+Required properties:
+- compatible: Should be "gpio-beeper".
+- gpios: From common gpio binding; gpio connection to beeper enable pin.
+
+Example:
+ beeper: beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/input/gpio-decoder.txt b/Documentation/devicetree/bindings/input/gpio-decoder.txt
new file mode 100644
index 000000000..14a77fb96
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-decoder.txt
@@ -0,0 +1,23 @@
+* GPIO Decoder DT bindings
+
+Required Properties:
+- compatible: should be "gpio-decoder"
+- gpios: a spec of gpios (at least two) to be decoded to a number with
+ first entry representing the MSB.
+
+Optional Properties:
+- decoder-max-value: Maximum possible value that can be reported by
+ the gpios.
+- linux,axis: the input subsystem axis to map to (ABS_X/ABS_Y).
+ Defaults to 0 (ABS_X).
+
+Example:
+ gpio-decoder0 {
+ compatible = "gpio-decoder";
+ gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+ <&pca9536 2 GPIO_ACTIVE_HIGH>,
+ <&pca9536 1 GPIO_ACTIVE_HIGH>,
+ <&pca9536 0 GPIO_ACTIVE_HIGH>;
+ linux,axis = <0>; /* ABS_X */
+ decoder-max-value = <9>;
+ };
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
new file mode 100644
index 000000000..17ac9dff7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device-Tree bindings for GPIO attached keys
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - gpio-keys
+ - gpio-keys-polled
+
+ autorepeat: true
+
+ label:
+ description: Name of entire device
+
+ poll-interval: true
+
+patternProperties:
+ "^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
+ $ref: input.yaml#
+
+ properties:
+ gpios:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ label:
+ description: Descriptive name of the key.
+
+ linux,code:
+ description: Key / Axis code to emit.
+
+ linux,input-type:
+ default: 1 # EV_KEY
+
+ linux,input-value:
+ description: |
+ If linux,input-type is EV_ABS or EV_REL then this
+ value is sent for events this button generates when pressed.
+ EV_ABS/EV_REL axis will generate an event with a value of 0
+ when all buttons with linux,input-type == type and
+ linux,code == axis are released. This value is interpreted
+ as a signed 32 bit value, e.g. to make a button generate a
+ value of -1 use:
+
+ linux,input-value = <0xffffffff>; /* -1 */
+
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ debounce-interval:
+ description:
+ Debouncing interval time in milliseconds. If not specified defaults to 5.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ default: 5
+
+ wakeup-source:
+ description: Button can wake-up the system.
+
+ wakeup-event-action:
+ description: |
+ Specifies whether the key should wake the system when asserted, when
+ deasserted, or both. This property is only valid for keys that wake up the
+ system (e.g., when the "wakeup-source" property is also provided).
+
+ Supported values are defined in linux-event-codes.h:
+
+ EV_ACT_ANY - both asserted and deasserted
+ EV_ACT_ASSERTED - asserted
+ EV_ACT_DEASSERTED - deasserted
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+ linux,can-disable:
+ description:
+ Indicates that button is connected to dedicated (not shared) interrupt
+ which can be disabled to suppress events from the button.
+ type: boolean
+
+ required:
+ - linux,code
+
+ anyOf:
+ - required:
+ - interrupts
+ - required:
+ - interrupts-extended
+ - required:
+ - gpios
+
+ dependencies:
+ wakeup-event-action: [ wakeup-source ]
+ linux,input-value: [ gpios ]
+
+ unevaluatedProperties: false
+
+allOf:
+ - $ref: input.yaml#
+ - if:
+ properties:
+ compatible:
+ const: gpio-keys-polled
+ then:
+ required:
+ - poll-interval
+ else:
+ properties:
+ poll-interval: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ key-up {
+ label = "GPIO Key UP";
+ linux,code = <103>;
+ gpios = <&gpio1 0 1>;
+ };
+
+ key-down {
+ label = "GPIO Key DOWN";
+ linux,code = <108>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
new file mode 100644
index 000000000..570dc10f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
@@ -0,0 +1,49 @@
+* GPIO driven matrix keypad device tree bindings
+
+GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+The matrix keypad supports multiple row and column lines, a key can be
+placed at each intersection of a unique row and a unique column. The matrix
+keypad can sense a key-press and key-release by means of GPIO lines and
+report the event using GPIO interrupts to the cpu.
+
+Required Properties:
+- compatible: Should be "gpio-matrix-keypad"
+- row-gpios: List of gpios used as row lines. The gpio specifier
+ for this property depends on the gpio controller to
+ which these row lines are connected.
+- col-gpios: List of gpios used as column lines. The gpio specifier
+ for this property depends on the gpio controller to
+ which these column lines are connected.
+- linux,keymap: The definition can be found at
+ bindings/input/matrix-keymap.txt
+
+Optional Properties:
+- linux,no-autorepeat: do no enable autorepeat feature.
+- wakeup-source: use any event on keypad as wakeup event.
+ (Legacy property supported: "linux,wakeup")
+- debounce-delay-ms: debounce interval in milliseconds
+- col-scan-delay-us: delay, measured in microseconds, that is needed
+ before we can scan keypad after activating column gpio
+- drive-inactive-cols: drive inactive columns during scan,
+ default is to turn inactive columns into inputs.
+
+Example:
+ matrix-keypad {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ row-gpios = <&gpio2 25 0
+ &gpio2 26 0
+ &gpio2 27 0>;
+
+ col-gpios = <&gpio2 21 0
+ &gpio2 22 0>;
+
+ linux,keymap = <0x0000008B
+ 0x0100009E
+ 0x02000069
+ 0x0001006A
+ 0x0101001C
+ 0x0201006C>;
+ };
diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.txt b/Documentation/devicetree/bindings/input/gpio-mouse.txt
new file mode 100644
index 000000000..519510a11
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-mouse.txt
@@ -0,0 +1,32 @@
+Device-Tree bindings for GPIO attached mice
+
+This simply uses standard GPIO handles to define a simple mouse connected
+to 5-7 GPIO lines.
+
+Required properties:
+ - compatible: must be "gpio-mouse"
+ - scan-interval-ms: The scanning interval in milliseconds
+ - up-gpios: GPIO line phandle to the line indicating "up"
+ - down-gpios: GPIO line phandle to the line indicating "down"
+ - left-gpios: GPIO line phandle to the line indicating "left"
+ - right-gpios: GPIO line phandle to the line indicating "right"
+
+Optional properties:
+ - button-left-gpios: GPIO line handle to the left mouse button
+ - button-middle-gpios: GPIO line handle to the middle mouse button
+ - button-right-gpios: GPIO line handle to the right mouse button
+Example:
+
+#include <dt-bindings/gpio/gpio.h>
+
+gpio-mouse {
+ compatible = "gpio-mouse";
+ scan-interval-ms = <50>;
+ up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
new file mode 100644
index 000000000..2384465ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-vibrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO vibrator
+
+maintainers:
+ - Luca Weiss <luca@z3ntu.xyz>
+
+description: |+
+ Registers a GPIO device as vibrator, where the on/off capability is controlled by a GPIO.
+
+properties:
+ compatible:
+ const: gpio-vibrator
+
+ enable-gpios:
+ maxItems: 1
+
+ vcc-supply:
+ description: Regulator that provides power
+
+required:
+ - compatible
+ - enable-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ vibrator {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&pm8941_l18>;
+ };
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
new file mode 100644
index 000000000..7156b08f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/hid-over-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HID over I2C Devices
+
+maintainers:
+ - Benjamin Tissoires <benjamin.tissoires@redhat.com>
+ - Jiri Kosina <jkosina@suse.cz>
+
+description: |+
+ HID over I2C provides support for various Human Interface Devices over the
+ I2C bus. These devices can be for example touchpads, keyboards, touch screens
+ or sensors.
+
+ The specification has been written by Microsoft and is currently available here:
+ https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+ If this binding is used, the kernel module i2c-hid will handle the communication
+ with the device and the generic hid core layer will handle the protocol.
+
+allOf:
+ - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - wacom,w9013
+ - const: hid-over-i2c
+ - description: Just "hid-over-i2c" alone is allowed, but not recommended.
+ const: hid-over-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ hid-descr-addr:
+ description: HID descriptor address
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ post-power-on-delay-ms:
+ description: Time required by the device after enabling its regulators
+ or powering it on, before it is ready for communication.
+
+ touchscreen-inverted-x: true
+
+ touchscreen-inverted-y: true
+
+ vdd-supply:
+ description: 3.3V supply
+
+ vddl-supply:
+ description: 1.8V supply
+
+ wakeup-source: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hid@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x0020>;
+ interrupts = <3 2>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/input/ibm,op-panel.yaml b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
new file mode 100644
index 000000000..29a1879e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ibm,op-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM Operation Panel
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+ - $ref: input.yaml#
+
+description: |
+ The IBM Operation Panel provides a simple interface to control the connected
+ server. It has a display and three buttons: two directional arrows and one
+ 'Enter' button.
+
+properties:
+ compatible:
+ const: ibm,op-panel
+
+ reg:
+ maxItems: 1
+
+ linux,keycodes:
+ minItems: 1
+ maxItems: 3
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/i2c/i2c.h>
+ #include <dt-bindings/input/input.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ibm-op-panel@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_ENTER>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml
new file mode 100644
index 000000000..7514df62b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/imx-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Keypad Port(KPP)
+
+maintainers:
+ - Liu Ying <gnuiyl@gmail.com>
+
+allOf:
+ - $ref: "/schemas/input/matrix-keymap.yaml#"
+
+description: |
+ The KPP is designed to interface with a keypad matrix with 2-point contact
+ or 3-point contact keys. The KPP is designed to simplify the software task
+ of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
+ and decoding one or multiple keys pressed simultaneously on a keypad.
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,imx21-kpp
+ - items:
+ - enum:
+ - fsl,imx25-kpp
+ - fsl,imx27-kpp
+ - fsl,imx31-kpp
+ - fsl,imx35-kpp
+ - fsl,imx51-kpp
+ - fsl,imx53-kpp
+ - fsl,imx50-kpp
+ - fsl,imx6q-kpp
+ - fsl,imx6sx-kpp
+ - fsl,imx6sl-kpp
+ - fsl,imx6sll-kpp
+ - fsl,imx6ul-kpp
+ - fsl,imx7d-kpp
+ - const: fsl,imx21-kpp
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ keypad@73f94000 {
+ compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+ reg = <0x73f94000 0x4000>;
+ interrupts = <60>;
+ clocks = <&clks 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp_1>;
+ linux,keymap = <0x00000067 /* KEY_UP */
+ 0x0001006c /* KEY_DOWN */
+ 0x00020072 /* KEY_VOLUMEDOWN */
+ 0x00030066 /* KEY_HOME */
+ 0x0100006a /* KEY_RIGHT */
+ 0x01010069 /* KEY_LEFT */
+ 0x0102001c /* KEY_ENTER */
+ 0x01030073 /* KEY_VOLUMEUP */
+ 0x02000040 /* KEY_F6 */
+ 0x02010042 /* KEY_F8 */
+ 0x02020043 /* KEY_F9 */
+ 0x02030044 /* KEY_F10 */
+ 0x0300003b /* KEY_F1 */
+ 0x0301003c /* KEY_F2 */
+ 0x0302003d /* KEY_F3 */
+ 0x03030074>; /* KEY_POWER */
+ };
diff --git a/Documentation/devicetree/bindings/input/input-reset.txt b/Documentation/devicetree/bindings/input/input-reset.txt
new file mode 100644
index 000000000..1ca6cc5eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/input-reset.txt
@@ -0,0 +1,33 @@
+Input: sysrq reset sequence
+
+A simple binding to represent a set of keys as described in
+include/uapi/linux/input.h. This is to communicate a sequence of keys to the
+sysrq driver. Upon holding the keys for a specified amount of time (if
+specified) the system is sync'ed and reset.
+
+Key sequences are global to the system but all the keys in a set must be coming
+from the same input device.
+
+The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define
+a set of keys.
+
+Required property:
+keyset: array of Linux keycodes, one keycode per cell.
+
+Optional property:
+timeout-ms: duration keys must be pressed together in milliseconds before
+generating a sysrq. If omitted the system is rebooted immediately when a valid
+sequence has been recognized.
+
+Example:
+
+ chosen {
+ linux,sysrq-reset-seq {
+ keyset = <0x03
+ 0x04
+ 0x0a>;
+ timeout-ms = <3000>;
+ };
+ };
+
+Would represent KEY_2, KEY_3 and KEY_9.
diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
new file mode 100644
index 000000000..17512f434
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/input.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/input.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common input schema binding
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+properties:
+ autorepeat:
+ description: Enable autorepeat when key is pressed and held down.
+ type: boolean
+
+ linux,keycodes:
+ description:
+ Specifies an array of numeric keycode values to be used for reporting
+ button presses.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minimum: 0
+ maximum: 0x2ff
+
+ linux,code:
+ description:
+ Specifies a single numeric keycode value to be used for reporting
+ button/switch events. Specify KEY_RESERVED (0) to opt out of event
+ reporting.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 0x2ff
+
+ linux,input-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 1 # EV_KEY
+ - 2 # EV_REL
+ - 3 # EV_ABS
+ - 5 # EV_SW
+ description:
+ Specifies whether the event is to be interpreted as a key, relative,
+ absolute, or switch.
+
+ poll-interval:
+ description: Poll interval time in milliseconds.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ power-off-time-sec:
+ description:
+ Duration in seconds which the key should be kept pressed for device to
+ power off automatically. Device with key pressed shutdown feature can
+ specify this property.
+
+ reset-time-sec:
+ description:
+ Duration in seconds which the key should be kept pressed for device to
+ reset automatically. Device with key pressed reset feature can specify
+ this property.
+
+dependencies:
+ linux,input-type: [ "linux,code" ]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
new file mode 100644
index 000000000..3c430d385
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -0,0 +1,552 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs269a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS269A Capacitive Touch Controller
+
+maintainers:
+ - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+ The Azoteq IQS269A is an 8-channel capacitive touch controller that features
+ additional Hall-effect and inductive sensing capabilities.
+
+ Link to datasheet: https://www.azoteq.com/
+
+properties:
+ compatible:
+ const: azoteq,iqs269a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ azoteq,hall-enable:
+ type: boolean
+ description:
+ Enables Hall-effect sensing on channels 6 and 7. In this case, keycodes
+ assigned to channel 6 are ignored and keycodes assigned to channel 7 are
+ interpreted as switch codes. Refer to the datasheet for requirements im-
+ posed on channels 6 and 7 by Hall-effect sensing.
+
+ azoteq,suspend-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the power mode during suspend as follows:
+ 0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
+ 1: Low power (all sensing at a reduced reporting rate)
+ 2: Ultra-low power (channel 0 proximity sensing)
+ 3: Halt (no sensing)
+
+ azoteq,clk-div:
+ type: boolean
+ description: Divides the device's core clock by a factor of 4.
+
+ azoteq,ulp-update:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+ default: 3
+ description: Specifies the ultra-low-power mode update rate.
+
+ azoteq,reseed-offset:
+ type: boolean
+ description:
+ Applies an 8-count offset to all long-term averages upon either ATI or
+ reseed events.
+
+ azoteq,filt-str-lp-lta:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the long-term average filter strength during low-power mode.
+
+ azoteq,filt-str-lp-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during low-power mode.
+
+ azoteq,filt-str-np-lta:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the long-term average filter strength during normal-power mode.
+
+ azoteq,filt-str-np-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during normal-power mode.
+
+ azoteq,rate-np-ms:
+ minimum: 0
+ maximum: 255
+ default: 16
+ description: Specifies the report rate (in ms) during normal-power mode.
+
+ azoteq,rate-lp-ms:
+ minimum: 0
+ maximum: 255
+ default: 160
+ description: Specifies the report rate (in ms) during low-power mode.
+
+ azoteq,rate-ulp-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 160
+ description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+ azoteq,timeout-pwr-ms:
+ multipleOf: 512
+ minimum: 0
+ maximum: 130560
+ default: 2560
+ description:
+ Specifies the length of time (in ms) to wait for an event during normal-
+ power mode before transitioning to low-power mode.
+
+ azoteq,timeout-lta-ms:
+ multipleOf: 512
+ minimum: 0
+ maximum: 130560
+ default: 32768
+ description:
+ Specifies the length of time (in ms) to wait before resetting the long-
+ term average of all channels. Specify the maximum timeout to disable it
+ altogether.
+
+ azoteq,ati-band-disable:
+ type: boolean
+ description: Disables the ATI band check.
+
+ azoteq,ati-lp-only:
+ type: boolean
+ description: Limits automatic ATI to low-power mode.
+
+ azoteq,ati-band-tighten:
+ type: boolean
+ description: Tightens the ATI band from 1/8 to 1/16 of the desired target.
+
+ azoteq,filt-disable:
+ type: boolean
+ description: Disables all raw count filtering.
+
+ azoteq,gpio3-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+ default: 0
+ description:
+ Selects the channel for which the GPIO3 pin represents touch state.
+
+ azoteq,dual-direction:
+ type: boolean
+ description:
+ Specifies that long-term averages are to freeze in the presence of either
+ increasing or decreasing counts, thereby permitting events to be reported
+ in either direction.
+
+ azoteq,tx-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the inductive sensing excitation frequency as follows (paren-
+ thesized numbers represent the frequency if 'azoteq,clk-div' is present):
+ 0: 16 MHz (4 MHz)
+ 1: 8 MHz (2 MHz)
+ 2: 4 MHz (1 MHz)
+ 3: 2 MHz (500 kHz)
+
+ azoteq,global-cap-increase:
+ type: boolean
+ description: Increases the global capacitance adder from 0.5 pF to 1.5 pF.
+
+ azoteq,reseed-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the event(s) that prompt the device to reseed (i.e. reset the
+ long-term average) of an associated channel as follows:
+ 0: None
+ 1: Proximity
+ 2: Proximity or touch
+ 3: Proximity, touch or deep touch
+
+ azoteq,tracking-enable:
+ type: boolean
+ description:
+ Enables all associated channels to track their respective reference
+ channels.
+
+ azoteq,filt-str-slider:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 1
+ description: Specifies the slider coordinate filter strength.
+
+patternProperties:
+ "^channel@[0-7]$":
+ type: object
+ description:
+ Represents a single sensing channel. A channel is active if defined and
+ inactive otherwise.
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 7
+ description: Index of the channel.
+
+ azoteq,reseed-disable:
+ type: boolean
+ description:
+ Prevents the channel from being reseeded if the long-term average
+ timeout (defined in 'azoteq,timeout-lta') expires.
+
+ azoteq,blocking-enable:
+ type: boolean
+ description: Specifies that the channel is a blocking channel.
+
+ azoteq,slider0-select:
+ type: boolean
+ description: Specifies that the channel participates in slider 0.
+
+ azoteq,slider1-select:
+ type: boolean
+ description: Specifies that the channel participates in slider 1.
+
+ azoteq,rx-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+ description:
+ Specifies the CRX pin(s) associated with the channel. By default, only
+ the CRX pin corresponding to the channel's index is enabled (e.g. CRX0
+ for channel 0).
+
+ azoteq,tx-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+ default: [0, 1, 2, 3, 4, 5, 6, 7]
+ description: Specifies the TX pin(s) associated with the channel.
+
+ azoteq,meas-cap-decrease:
+ type: boolean
+ description:
+ Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+ azoteq,rx-float-inactive:
+ type: boolean
+ description: Floats any inactive CRX pins instead of grounding them.
+
+ azoteq,local-cap-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ default: 0
+ description: |
+ Specifies the capacitance to be added to the channel as follows:
+ 0: None
+ 1: Global adder (based on 'azoteq,global-cap-increase')
+ 2: Global adder + 0.5 pF
+
+ azoteq,invert-enable:
+ type: boolean
+ description:
+ Inverts the polarity of the states reported for proximity, touch and
+ deep-touch events relative to their respective thresholds.
+
+ azoteq,proj-bias:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 2
+ description: |
+ Specifies the bias current applied during projected-capacitance
+ sensing as follows:
+ 0: 2.5 uA
+ 1: 5 uA
+ 2: 10 uA
+ 3: 20 uA
+
+ azoteq,sense-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 9, 14, 15]
+ default: 0
+ description: |
+ Specifies the channel's sensing mode as follows:
+ 0: Self capacitance
+ 1: Projected capacitance
+ 9: Self or mutual inductance
+ 14: Hall effect
+ 15: Temperature
+
+ azoteq,sense-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 1
+ description: |
+ Specifies the channel's sensing frequency as follows (parenthesized
+ numbers represent the frequency if 'azoteq,clk-div' is present):
+ 0: 4 MHz (1 MHz)
+ 1: 2 MHz (500 kHz)
+ 2: 1 MHz (250 kHz)
+ 3: 500 kHz (125 kHz)
+
+ azoteq,static-enable:
+ type: boolean
+ description: Enables the static front-end for the channel.
+
+ azoteq,ati-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 3
+ description: |
+ Specifies the channel's ATI mode as follows:
+ 0: Disabled
+ 1: Semi-partial
+ 2: Partial
+ 3: Full
+
+ azoteq,ati-base:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [75, 100, 150, 200]
+ default: 100
+ description: Specifies the channel's ATI base.
+
+ azoteq,ati-target:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 32
+ minimum: 0
+ maximum: 2016
+ default: 512
+ description: Specifies the channel's ATI target.
+
+ azoteq,assoc-select:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+ description:
+ Specifies the associated channels for which the channel serves as a
+ reference channel. By default, no channels are selected.
+
+ azoteq,assoc-weight:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 0
+ description:
+ Specifies the channel's impact weight if it acts as an associated
+ channel (0 = 0% impact, 255 = 200% impact).
+
+ patternProperties:
+ "^event-prox(-alt)?$":
+ type: object
+ $ref: input.yaml#
+ description:
+ Represents a proximity event reported by the channel in response to
+ a decrease in counts. Node names suffixed with '-alt' instead corre-
+ spond to an increase in counts.
+
+ By default, the long-term average tracks an increase in counts such
+ that only events corresponding to a decrease in counts are reported
+ (refer to the datasheet for more information).
+
+ Specify 'azoteq,dual-direction' to freeze the long-term average when
+ the counts increase or decrease such that events of either direction
+ can be reported. Alternatively, specify 'azoteq,invert-enable' to in-
+ vert the polarity of the states reported by the channel.
+
+ Complementary events (e.g. event-touch and event-touch-alt) can both
+ be present and specify different key or switch codes, but not differ-
+ ent thresholds or hysteresis (if applicable).
+
+ properties:
+ azoteq,thresh:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 10
+ description: Specifies the threshold for the event.
+
+ linux,code: true
+
+ additionalProperties: false
+
+ "^event-touch(-alt)?$":
+ type: object
+ $ref: input.yaml#
+ description: Represents a touch event reported by the channel.
+
+ properties:
+ azoteq,thresh:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 8
+ description: Specifies the threshold for the event.
+
+ azoteq,hyst:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 4
+ description: Specifies the hysteresis for the event.
+
+ linux,code: true
+
+ additionalProperties: false
+
+ "^event-deep(-alt)?$":
+ type: object
+ $ref: input.yaml#
+ description: Represents a deep-touch event reported by the channel.
+
+ properties:
+ azoteq,thresh:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 26
+ description: Specifies the threshold for the event.
+
+ azoteq,hyst:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 0
+ description: Specifies the hysteresis for the event.
+
+ linux,code: true
+
+ additionalProperties: false
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touch@44 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "azoteq,iqs269a";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+ azoteq,hall-enable;
+ azoteq,suspend-mode = <2>;
+
+ channel@0 {
+ reg = <0x0>;
+
+ event-prox {
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ azoteq,slider0-select;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ azoteq,slider0-select;
+ };
+
+ channel@3 {
+ reg = <0x3>;
+ azoteq,slider0-select;
+ };
+
+ channel@4 {
+ reg = <0x4>;
+ azoteq,slider0-select;
+ };
+
+ channel@5 {
+ reg = <0x5>;
+ azoteq,slider0-select;
+ };
+
+ channel@6 {
+ reg = <0x6>;
+ azoteq,invert-enable;
+ azoteq,static-enable;
+ azoteq,reseed-disable;
+ azoteq,rx-enable = <0>;
+ azoteq,sense-freq = <0x0>;
+ azoteq,sense-mode = <0xE>;
+ azoteq,ati-mode = <0x0>;
+ azoteq,ati-base = <200>;
+ azoteq,ati-target = <320>;
+ };
+
+ channel@7 {
+ reg = <0x7>;
+ azoteq,invert-enable;
+ azoteq,static-enable;
+ azoteq,reseed-disable;
+ azoteq,rx-enable = <0>, <6>;
+ azoteq,sense-freq = <0x0>;
+ azoteq,sense-mode = <0xE>;
+ azoteq,ati-mode = <0x3>;
+ azoteq,ati-base = <200>;
+ azoteq,ati-target = <320>;
+
+ event-touch {
+ linux,code = <SW_LID>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
new file mode 100644
index 000000000..7a2750209
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -0,0 +1,838 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs626a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS626A Capacitive Touch Controller
+
+maintainers:
+ - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+ The Azoteq IQS626A is a 14-channel capacitive touch controller that features
+ additional Hall-effect and inductive sensing capabilities.
+
+ Link to datasheet: https://www.azoteq.com/
+
+allOf:
+ - $ref: touchscreen/touchscreen.yaml#
+
+properties:
+ compatible:
+ const: azoteq,iqs626a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ azoteq,suspend-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the power mode during suspend as follows:
+ 0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
+ 1: Low power (all sensing at a reduced reporting rate)
+ 2: Ultra-low power (ULP channel proximity sensing)
+ 3: Halt (no sensing)
+
+ azoteq,clk-div:
+ type: boolean
+ description: Divides the device's core clock by a factor of 4.
+
+ azoteq,ulp-enable:
+ type: boolean
+ description:
+ Permits the device to automatically enter ultra-low-power mode from low-
+ power mode.
+
+ azoteq,ulp-update:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 3
+ description: |
+ Specifies the rate at which the trackpad, generic and Hall channels are
+ updated during ultra-low-power mode as follows:
+ 0: 8
+ 1: 13
+ 2: 28
+ 3: 54
+ 4: 89
+ 5: 135
+ 6: 190
+ 7: 256
+
+ azoteq,ati-band-disable:
+ type: boolean
+ description: Disables the ATI band check.
+
+ azoteq,ati-lp-only:
+ type: boolean
+ description: Limits automatic ATI to low-power mode.
+
+ azoteq,gpio3-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 1
+ description: |
+ Selects the channel or group of channels for which the GPIO3 pin
+ represents touch state as follows:
+ 0: None
+ 1: ULP channel
+ 2: Trackpad
+ 3: Trackpad
+ 4: Generic channel 0
+ 5: Generic channel 1
+ 6: Generic channel 2
+ 7: Hall channel
+
+ azoteq,reseed-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the event(s) that prompt the device to reseed (i.e. reset the
+ long-term average) of an associated channel as follows:
+ 0: None
+ 1: Proximity
+ 2: Proximity or touch
+ 3: Proximity, touch or deep touch
+
+ azoteq,thresh-extend:
+ type: boolean
+ description: Multiplies all touch and deep-touch thresholds by 4.
+
+ azoteq,tracking-enable:
+ type: boolean
+ description:
+ Enables all associated channels to track their respective reference
+ channels.
+
+ azoteq,reseed-offset:
+ type: boolean
+ description:
+ Applies an 8-count offset to all long-term averages upon either ATI or
+ reseed events.
+
+ azoteq,rate-np-ms:
+ minimum: 0
+ maximum: 255
+ default: 150
+ description: Specifies the report rate (in ms) during normal-power mode.
+
+ azoteq,rate-lp-ms:
+ minimum: 0
+ maximum: 255
+ default: 150
+ description: Specifies the report rate (in ms) during low-power mode.
+
+ azoteq,rate-ulp-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 0
+ description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+ azoteq,timeout-pwr-ms:
+ multipleOf: 512
+ minimum: 0
+ maximum: 130560
+ default: 2560
+ description:
+ Specifies the length of time (in ms) to wait for an event before moving
+ from normal-power mode to low-power mode, or (if 'azoteq,ulp-enable' is
+ present) from low-power mode to ultra-low-power mode.
+
+ azoteq,timeout-lta-ms:
+ multipleOf: 512
+ minimum: 0
+ maximum: 130560
+ default: 40960
+ description:
+ Specifies the length of time (in ms) to wait before resetting the long-
+ term average of all channels. Specify the maximum timeout to disable it
+ altogether.
+
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+patternProperties:
+ "^ulp-0|generic-[0-2]|hall$":
+ type: object
+ description:
+ Represents a single sensing channel. A channel is active if defined and
+ inactive otherwise.
+
+ properties:
+ azoteq,ati-exclude:
+ type: boolean
+ description:
+ Prevents the channel from participating in an ATI event that is
+ manually triggered during initialization.
+
+ azoteq,reseed-disable:
+ type: boolean
+ description:
+ Prevents the channel from being reseeded if the long-term average
+ timeout (defined in 'azoteq,timeout-lta') expires.
+
+ azoteq,meas-cap-decrease:
+ type: boolean
+ description:
+ Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+ azoteq,rx-inactive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ default: 0
+ description: |
+ Specifies how inactive CRX pins are to be terminated as follows:
+ 0: VSS
+ 1: Floating
+ 2: VREG (generic channels only)
+
+ azoteq,linearize:
+ type: boolean
+ description:
+ Enables linearization of the channel's counts (generic and Hall
+ channels) or inverts the polarity of the channel's proximity or
+ touch states (ULP channel).
+
+ azoteq,dual-direction:
+ type: boolean
+ description:
+ Specifies that the channel's long-term average is to freeze in the
+ presence of either increasing or decreasing counts, thereby permit-
+ ting events to be reported in either direction.
+
+ azoteq,filt-disable:
+ type: boolean
+ description: Disables raw count filtering for the channel.
+
+ azoteq,ati-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the channel's ATI mode as follows:
+ 0: Disabled
+ 1: Semi-partial
+ 2: Partial
+ 3: Full
+
+ The default value is a function of the channel and the device's reset
+ user interface (RUI); reference the datasheet for further information
+ about the available RUI options.
+
+ azoteq,ati-base:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [75, 100, 150, 200]
+ description:
+ Specifies the channel's ATI base. The default value is a function
+ of the channel and the device's RUI.
+
+ azoteq,ati-target:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 32
+ minimum: 0
+ maximum: 2016
+ description:
+ Specifies the channel's ATI target. The default value is a function
+ of the channel and the device's RUI.
+
+ azoteq,cct-increase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 16
+ default: 0
+ description:
+ Specifies the degree to which the channel's charge cycle time is to
+ be increased, with 0 representing no increase. The maximum value is
+ limited to 4 in the case of the ULP channel, and the property is un-
+ available entirely in the case of the Hall channel.
+
+ azoteq,proj-bias:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the bias current applied during projected-capacitance
+ sensing as follows:
+ 0: 2.5 uA
+ 1: 5 uA
+ 2: 10 uA
+ 3: 20 uA
+
+ This property is unavailable in the case of the Hall channel.
+
+ azoteq,sense-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the channel's sensing frequency as follows (parenthesized
+ numbers represent the frequency if 'azoteq,clk-div' is present):
+ 0: 4 MHz (1 MHz)
+ 1: 2 MHz (500 kHz)
+ 2: 1 MHz (250 kHz)
+ 3: 500 kHz (125 kHz)
+
+ This property is unavailable in the case of the Hall channel. The
+ default value is a function of the channel and the device's RUI.
+
+ azoteq,ati-band-tighten:
+ type: boolean
+ description:
+ Tightens the ATI band from 1/8 to 1/16 of the desired target (ULP and
+ generic channels only).
+
+ azoteq,proj-enable:
+ type: boolean
+ description: Enables projected-capacitance sensing (ULP channel only).
+
+ azoteq,filt-str-np-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during normal-power mode (ULP
+ and generic channels only).
+
+ azoteq,filt-str-lp-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during low-power mode (ULP and
+ generic channels only).
+
+ azoteq,filt-str-np-lta:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the long-term average filter strength during normal-power
+ mode (ULP and generic channels only).
+
+ azoteq,filt-str-lp-lta:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the long-term average filter strength during low-power mode
+ (ULP and generic channels only).
+
+ azoteq,rx-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+ description:
+ Specifies the CRX pin(s) associated with the channel.
+
+ This property is unavailable in the case of the Hall channel. The
+ default value is a function of the channel and the device's RUI.
+
+ azoteq,tx-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+ description:
+ Specifies the TX pin(s) associated with the channel.
+
+ This property is unavailable in the case of the Hall channel. The
+ default value is a function of the channel and the device's RUI.
+
+ azoteq,local-cap-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4]
+ default: 0
+ description: |
+ Specifies the capacitance to be added to the channel as follows:
+ 0: 0 pF
+ 1: 0.5 pF
+ 2: 1.0 pF
+ 3: 1.5 pF
+ 4: 2.0 pF
+
+ This property is unavailable in the case of the ULP or Hall channels.
+
+ azoteq,sense-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 8, 9, 12, 14, 15]
+ description: |
+ Specifies the channel's sensing mode as follows:
+ 0: Self capacitance
+ 1: Projected capacitance
+ 8: Self inductance
+ 9: Mutual inductance
+ 12: External
+ 14: Hall effect
+ 15: Temperature
+
+ This property is unavailable in the case of the ULP or Hall channels.
+ The default value is a function of the channel and the device's RUI.
+
+ azoteq,tx-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the inductive sensing excitation frequency as follows
+ (parenthesized numbers represent the frequency if 'azoteq,clk-div'
+ is present):
+ 0: 16 MHz (4 MHz)
+ 1: 8 MHz (2 MHz)
+ 2: 4 MHz (1 MHz)
+ 3: 2 MHz (500 kHz)
+
+ This property is unavailable in the case of the ULP or Hall channels.
+
+ azoteq,invert-enable:
+ type: boolean
+ description:
+ Inverts the polarity of the states reported for proximity, touch and
+ deep-touch events relative to their respective thresholds (generic
+ channels only).
+
+ azoteq,comp-disable:
+ type: boolean
+ description:
+ Disables compensation for the channel (generic channels only).
+
+ azoteq,static-enable:
+ type: boolean
+ description:
+ Enables the static front-end for the channel (generic channels only).
+
+ azoteq,assoc-select:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ minItems: 1
+ maxItems: 6
+ items:
+ enum:
+ - ulp-0
+ - trackpad-3x2
+ - trackpad-3x3
+ - generic-0
+ - generic-1
+ - generic-2
+ - hall
+ description:
+ Specifies the associated channels for which the channel serves as a
+ reference channel. By default, no channels are selected. This prop-
+ erty is only available for the generic channels.
+
+ azoteq,assoc-weight:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 0
+ description:
+ Specifies the channel's impact weight if it acts as an associated
+ channel (0 = 0% impact, 255 = 200% impact). This property is only
+ available for the generic channels.
+
+ patternProperties:
+ "^event-(prox|touch|deep)(-alt)?$":
+ type: object
+ $ref: input.yaml#
+ description:
+ Represents a proximity, touch or deep-touch event reported by the
+ channel in response to a decrease in counts. Node names suffixed with
+ '-alt' instead correspond to an increase in counts.
+
+ By default, the long-term average tracks an increase in counts such
+ that only events corresponding to a decrease in counts are reported
+ (refer to the datasheet for more information).
+
+ Specify 'azoteq,dual-direction' to freeze the long-term average when
+ the counts increase or decrease such that events of either direction
+ can be reported. Alternatively, specify 'azoteq,invert-enable' to in-
+ vert the polarity of the states reported by the channel.
+
+ Complementary events (e.g. event-touch and event-touch-alt) can both
+ be present and specify different key or switch codes, but not differ-
+ ent thresholds or hysteresis (if applicable).
+
+ Proximity events are unavailable in the case of the Hall channel, and
+ deep-touch events are only available for the generic channels. Unless
+ otherwise specified, default values are a function of the channel and
+ the device's RUI.
+
+ properties:
+ azoteq,thresh:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ description: Specifies the threshold for the event.
+
+ azoteq,hyst:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description:
+ Specifies the hysteresis for the event (touch and deep-touch
+ events only).
+
+ linux,code: true
+
+ linux,input-type:
+ enum: [1, 5]
+ description:
+ Specifies whether the event is to be interpreted as a key (1) or
+ a switch (5). By default, Hall-channel events are interpreted as
+ switches and all others are interpreted as keys.
+
+ additionalProperties: false
+
+ dependencies:
+ azoteq,assoc-weight: ["azoteq,assoc-select"]
+
+ additionalProperties: false
+
+ "^trackpad-3x[2-3]$":
+ type: object
+ $ref: input.yaml#
+ description:
+ Represents all channels associated with the trackpad. The channels are
+ collectively active if the trackpad is defined and inactive otherwise.
+
+ properties:
+ azoteq,ati-exclude:
+ type: boolean
+ description:
+ Prevents the trackpad channels from participating in an ATI event
+ that is manually triggered during initialization.
+
+ azoteq,reseed-disable:
+ type: boolean
+ description:
+ Prevents the trackpad channels from being reseeded if the long-term
+ average timeout (defined in 'azoteq,timeout-lta') expires.
+
+ azoteq,meas-cap-decrease:
+ type: boolean
+ description:
+ Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+ azoteq,rx-inactive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ default: 0
+ description: |
+ Specifies how inactive CRX pins are to be terminated as follows:
+ 0: VSS
+ 1: Floating
+
+ azoteq,linearize:
+ type: boolean
+ description: Inverts the polarity of the trackpad's touch state.
+
+ azoteq,dual-direction:
+ type: boolean
+ description:
+ Specifies that the trackpad's long-term averages are to freeze in
+ the presence of either increasing or decreasing counts, thereby
+ permitting events to be reported in either direction.
+
+ azoteq,filt-disable:
+ type: boolean
+ description: Disables raw count filtering for the trackpad channels.
+
+ azoteq,ati-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the trackpad's ATI mode as follows:
+ 0: Disabled
+ 1: Semi-partial
+ 2: Partial
+ 3: Full
+
+ azoteq,ati-base:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 6
+ maxItems: 9
+ items:
+ minimum: 45
+ maximum: 300
+ default: [45, 45, 45, 45, 45, 45, 45, 45, 45]
+ description: Specifies each individual trackpad channel's ATI base.
+
+ azoteq,ati-target:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 32
+ minimum: 0
+ maximum: 2016
+ default: 0
+ description: Specifies the trackpad's ATI target.
+
+ azoteq,cct-increase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 4
+ default: 0
+ description:
+ Specifies the degree to which the trackpad's charge cycle time is to
+ be increased, with 0 representing no increase.
+
+ azoteq,proj-bias:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the bias current applied during projected-capacitance
+ sensing as follows:
+ 0: 2.5 uA
+ 1: 5 uA
+ 2: 10 uA
+ 3: 20 uA
+
+ azoteq,sense-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the trackpad's sensing frequency as follows (parenthesized
+ numbers represent the frequency if 'azoteq,clk-div' is present):
+ 0: 4 MHz (1 MHz)
+ 1: 2 MHz (500 kHz)
+ 2: 1 MHz (250 kHz)
+ 3: 500 kHz (125 kHz)
+
+ azoteq,ati-band-tighten:
+ type: boolean
+ description:
+ Tightens the ATI band from 1/8 to 1/16 of the desired target.
+
+ azoteq,thresh:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 6
+ maxItems: 9
+ items:
+ minimum: 0
+ maximum: 255
+ default: [0, 0, 0, 0, 0, 0, 0, 0, 0]
+ description:
+ Specifies each individual trackpad channel's touch threshold.
+
+ azoteq,hyst:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 0
+ description: Specifies the trackpad's touch hysteresis.
+
+ azoteq,lta-update:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 0
+ description: |
+ Specifies the update rate of the trackpad's long-term average during
+ ultra-low-power mode as follows:
+ 0: 2
+ 1: 4
+ 2: 8
+ 3: 16
+ 4: 32
+ 5: 64
+ 6: 128
+ 7: 255
+
+ azoteq,filt-str-trackpad:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: Specifies the trackpad coordinate filter strength.
+
+ azoteq,filt-str-np-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during normal-power mode.
+
+ azoteq,filt-str-lp-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during low-power mode.
+
+ linux,keycodes:
+ minItems: 1
+ maxItems: 6
+ description: |
+ Specifies the numeric keycodes associated with each available gesture
+ in the following order (enter 0 for unused gestures):
+ 0: Positive flick or swipe in X direction
+ 1: Negative flick or swipe in X direction
+ 2: Positive flick or swipe in Y direction
+ 3: Negative flick or swipe in Y direction
+ 4: Tap
+ 5: Hold
+
+ azoteq,gesture-swipe:
+ type: boolean
+ description:
+ Directs the device to interpret axial gestures as a swipe (finger
+ remains on trackpad) instead of a flick (finger leaves trackpad).
+
+ azoteq,timeout-tap-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 0
+ description:
+ Specifies the length of time (in ms) within which a trackpad touch
+ must be released in order to be interpreted as a tap.
+
+ azoteq,timeout-swipe-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 0
+ description:
+ Specifies the length of time (in ms) within which an axial gesture
+ must be completed in order to be interpreted as a flick or swipe.
+
+ azoteq,thresh-swipe:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 0
+ description:
+ Specifies the number of points across which an axial gesture must
+ travel in order to be interpreted as a flick or swipe.
+
+ dependencies:
+ azoteq,gesture-swipe: ["linux,keycodes"]
+ azoteq,timeout-tap-ms: ["linux,keycodes"]
+ azoteq,timeout-swipe-ms: ["linux,keycodes"]
+ azoteq,thresh-swipe: ["linux,keycodes"]
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touch@44 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "azoteq,iqs626a";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+ azoteq,rate-np-ms = <16>;
+ azoteq,rate-lp-ms = <160>;
+
+ azoteq,timeout-pwr-ms = <2560>;
+ azoteq,timeout-lta-ms = <32768>;
+
+ ulp-0 {
+ azoteq,meas-cap-decrease;
+
+ azoteq,ati-base = <75>;
+ azoteq,ati-target = <1024>;
+
+ azoteq,rx-enable = <2>, <3>, <4>,
+ <5>, <6>, <7>;
+
+ event-prox {
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ trackpad-3x3 {
+ azoteq,filt-str-np-cnt = <1>;
+ azoteq,filt-str-lp-cnt = <1>;
+
+ azoteq,hyst = <4>;
+ azoteq,thresh = <35>, <40>, <40>,
+ <38>, <33>, <38>,
+ <35>, <35>, <35>;
+
+ azoteq,ati-mode = <3>;
+ azoteq,ati-base = <195>, <195>, <195>,
+ <195>, <195>, <195>,
+ <195>, <195>, <195>;
+ azoteq,ati-target = <512>;
+
+ azoteq,proj-bias = <1>;
+ azoteq,sense-freq = <2>;
+
+ linux,keycodes = <KEY_VOLUMEUP>,
+ <KEY_VOLUMEDOWN>,
+ <KEY_NEXTSONG>,
+ <KEY_PREVIOUSSONG>,
+ <KEY_PLAYPAUSE>,
+ <KEY_STOPCD>;
+
+ azoteq,gesture-swipe;
+ azoteq,timeout-swipe-ms = <800>;
+ azoteq,timeout-tap-ms = <400>;
+ azoteq,thresh-swipe = <40>;
+ };
+
+ /*
+ * Preserve the default register settings for
+ * the temperature-tracking channel leveraged
+ * by reset user interface (RUI) 1.
+ *
+ * Scalar properties (e.g. ATI mode) are left
+ * untouched by simply omitting them; boolean
+ * properties must be specified explicitly as
+ * needed.
+ */
+ generic-2 {
+ azoteq,reseed-disable;
+ azoteq,meas-cap-decrease;
+ azoteq,dual-direction;
+ azoteq,comp-disable;
+ azoteq,static-enable;
+ };
+
+ hall {
+ azoteq,reseed-disable;
+ azoteq,meas-cap-decrease;
+
+ event-touch {
+ linux,code = <SW_LID>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
new file mode 100644
index 000000000..0aa951f0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A/621/622/624/625 Keys and Switches
+
+maintainers:
+ - Jeff LaBundy <jeff@labundy.com>
+
+allOf:
+ - $ref: input.yaml#
+
+description: |
+ The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
+ feature a variety of self-capacitive, mutual-inductive and Hall-effect sens-
+ ing capabilities that can facilitate a variety of contactless key and switch
+ applications.
+
+ These functions are collectively represented by a "keys" child node from the
+ parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.yaml for
+ further details and examples. Sensor hardware configuration (self-capacitive
+ vs. mutual-inductive, etc.) is selected based on the device's firmware.
+
+properties:
+ compatible:
+ enum:
+ - azoteq,iqs620a-keys
+ - azoteq,iqs621-keys
+ - azoteq,iqs622-keys
+ - azoteq,iqs624-keys
+ - azoteq,iqs625-keys
+
+ linux,keycodes:
+ minItems: 1
+ maxItems: 16
+ description: |
+ Specifies the numeric keycodes associated with each available touch or
+ proximity event according to the following table. An 'x' indicates the
+ event is supported for a given device. Specify 0 for unused events.
+
+ -------------------------------------------------------------------------
+ | # | Event | IQS620A | IQS621 | IQS622 | IQS624 | IQS625 |
+ -------------------------------------------------------------------------
+ | 0 | CH0 Touch | x | x | x | x | x |
+ | | Antenna 1 Touch* | x | | | | |
+ -------------------------------------------------------------------------
+ | 1 | CH0 Proximity | x | x | x | x | x |
+ | | Antenna 1 Prox.* | x | | | | |
+ -------------------------------------------------------------------------
+ | 2 | CH1 Touch | x | x | x | x | x |
+ | | Ant. 1 Deep Touch* | x | | | | |
+ -------------------------------------------------------------------------
+ | 3 | CH1 Proximity | x | x | x | x | x |
+ -------------------------------------------------------------------------
+ | 4 | CH2 Touch | x | | | | |
+ -------------------------------------------------------------------------
+ | 5 | CH2 Proximity | x | | | | |
+ | | Antenna 2 Prox.* | x | | | | |
+ -------------------------------------------------------------------------
+ | 6 | Metal (+) Touch** | x | x | | | |
+ | | Ant. 2 Deep Touch* | x | | | | |
+ -------------------------------------------------------------------------
+ | 7 | Metal (+) Prox.** | x | x | | | |
+ | | Antenna 2 Touch* | x | | | | |
+ -------------------------------------------------------------------------
+ | 8 | Metal (-) Touch** | x | x | | | |
+ -------------------------------------------------------------------------
+ | 9 | Metal (-) Prox.** | x | x | | | |
+ -------------------------------------------------------------------------
+ | 10 | SAR Active*** | x | | x | | |
+ -------------------------------------------------------------------------
+ | 11 | SAR Quick Rel.*** | x | | x | | |
+ -------------------------------------------------------------------------
+ | 12 | SAR Movement*** | x | | x | | |
+ -------------------------------------------------------------------------
+ | 13 | SAR Filter Halt*** | x | | x | | |
+ -------------------------------------------------------------------------
+ | 14 | Wheel Up | | | | x | |
+ -------------------------------------------------------------------------
+ | 15 | Wheel Down | | | | x | |
+ -------------------------------------------------------------------------
+ * Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events
+ if enabled via firmware.
+ ** "+" and "-" refer to the polarity of a channel's delta (LTA - counts),
+ where "LTA" is defined as the channel's long-term average.
+ *** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled
+ via firmware.
+
+patternProperties:
+ "^hall-switch-(north|south)$":
+ type: object
+ $ref: input.yaml#
+ description:
+ Represents north/south-field Hall-effect sensor touch or proximity
+ events. Note that north/south-field orientation is reversed on the
+ IQS620AXzCSR device due to its flip-chip package.
+
+ properties:
+ linux,code: true
+
+ azoteq,use-prox:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If present, specifies that Hall-effect sensor reporting should
+ use the device's wide-range proximity threshold instead of its
+ close-range touch threshold (default).
+
+ required:
+ - linux,code
+
+ additionalProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - azoteq,iqs624-keys
+ - azoteq,iqs625-keys
+then:
+ patternProperties:
+ "^hall-switch-(north|south)$": false
+
+required:
+ - compatible
+ - linux,keycodes
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/lpc32xx-key.txt b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
new file mode 100644
index 000000000..2b075a080
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
@@ -0,0 +1,34 @@
+NXP LPC32xx Key Scan Interface
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+Required Properties:
+- compatible: Should be "nxp,lpc3220-key"
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The interrupt number to the cpu.
+- clocks: phandle to clock controller plus clock-specifier pair
+- nxp,debounce-delay-ms: Debounce delay in ms
+- nxp,scan-delay-ms: Repeated scan period in ms
+- linux,keymap: the key-code to be reported when the key is pressed
+ and released, see also
+ Documentation/devicetree/bindings/input/matrix-keymap.txt
+
+Note: keypad,num-rows and keypad,num-columns are required, and must be equal
+since LPC32xx only supports square matrices
+
+Example:
+
+ key@40050000 {
+ compatible = "nxp,lpc3220-key";
+ reg = <0x40050000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_KEY>;
+ interrupt-parent = <&sic1>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ keypad,num-rows = <1>;
+ keypad,num-columns = <1>;
+ nxp,debounce-delay-ms = <3>;
+ nxp,scan-delay-ms = <34>;
+ linux,keymap = <0x00000002>;
+ };
diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.txt b/Documentation/devicetree/bindings/input/matrix-keymap.txt
new file mode 100644
index 000000000..79f6d01ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/matrix-keymap.txt
@@ -0,0 +1 @@
+This file has been moved to matrix-keymap.yaml
diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
new file mode 100644
index 000000000..6699d5e32
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/matrix-keymap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common key matrices binding for matrix-connected key boards
+
+maintainers:
+ - Olof Johansson <olof@lixom.net>
+
+description: |
+ A simple common binding for matrix-connected key boards. Currently targeted at
+ defining the keys in the scope of linux key codes since that is a stable and
+ standardized interface at this time.
+
+ Some users of this binding might choose to specify secondary keymaps for
+ cases where there is a modifier key such as a Fn key. Proposed names
+ for said properties are "linux,fn-keymap" or with another descriptive
+ word for the modifier other from "Fn".
+
+properties:
+ linux,keymap:
+ $ref: '/schemas/types.yaml#/definitions/uint32-array'
+ description: |
+ An array of packed 1-cell entries containing the equivalent of row,
+ column and linux key-code. The 32-bit big endian cell is packed as:
+ row << 24 | column << 16 | key-code
+
+ keypad,num-rows:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of row lines connected to the keypad controller.
+
+ keypad,num-columns:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of column lines connected to the keypad controller.
+
+additionalProperties: true
+
+examples:
+ - |
+ keypad {
+ /* ... */
+ linux,keymap = < 0x00030012
+ 0x0102003a >;
+ keypad,num-rows = <2>;
+ keypad,num-columns = <8>;
+ };
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
new file mode 100644
index 000000000..48edc0c8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/max77650-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Onkey driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+ This module is part of the MAX77650 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+ The onkey controller is represented as a sub-node of the PMIC node on
+ the device tree.
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ const: maxim,max77650-onkey
+
+ linux,code:
+ default: 116 # KEY_POWER
+
+ maxim,onkey-slide:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The system's button is a slide switch, not the default push button.
+
+required:
+ - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
new file mode 100644
index 000000000..d768c30f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,mt6779-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek's Keypad Controller
+
+maintainers:
+ - Mattijs Korpershoek <mkorpershoek@baylibre.com>
+
+allOf:
+ - $ref: "/schemas/input/matrix-keymap.yaml#"
+
+description: |
+ Mediatek's Keypad controller is used to interface a SoC with a matrix-type
+ keypad device. The keypad controller supports multiple row and column lines.
+ A key can be placed at each intersection of a unique row and a unique column.
+ The keypad controller can sense a key-press and key-release and report the
+ event using a interrupt to the cpu.
+
+properties:
+ compatible:
+ oneOf:
+ - const: mediatek,mt6779-keypad
+ - items:
+ - enum:
+ - mediatek,mt6873-keypad
+ - const: mediatek,mt6779-keypad
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: kpd
+
+ wakeup-source:
+ description: use any event on keypad as wakeup event
+ type: boolean
+
+ debounce-delay-ms:
+ maximum: 256
+ default: 16
+
+ mediatek,keys-per-group:
+ description: each (row, column) group has multiple keys
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 1
+ maximum: 2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ keyboard@10010000 {
+ compatible = "mediatek,mt6779-keypad";
+ reg = <0 0x10010000 0 0x1000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&clk26m>;
+ clock-names = "kpd";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
new file mode 100644
index 000000000..2f72ec418
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,pmic-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PMIC Keys
+
+maintainers:
+ - Chen Zhong <chen.zhong@mediatek.com>
+
+allOf:
+ - $ref: input.yaml#
+
+description: |
+ There are two key functions provided by MT6397, MT6323 and other MediaTek
+ PMICs: pwrkey and homekey.
+ The key functions are defined as the subnode of the function node provided
+ by the PMIC that is defined as a Multi-Function Device (MFD).
+
+ For MediaTek MT6323/MT6397 PMIC bindings see
+ Documentation/devicetree/bindings/mfd/mt6397.txt
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt6323-keys
+ - mediatek,mt6331-keys
+ - mediatek,mt6358-keys
+ - mediatek,mt6397-keys
+
+ power-off-time-sec: true
+
+ mediatek,long-press-mode:
+ description: |
+ Key long-press force shutdown setting
+ 0 - disabled
+ 1 - pwrkey
+ 2 - pwrkey+homekey
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+ maximum: 2
+
+patternProperties:
+ "^((power|home)|(key-[a-z0-9-]+|[a-z0-9-]+-key))$":
+ $ref: input.yaml#
+
+ properties:
+ interrupts:
+ minItems: 1
+ items:
+ - description: Key press interrupt
+ - description: Key release interrupt
+
+ interrupt-names: true
+
+ linux-keycodes:
+ maxItems: 1
+
+ wakeup-source: true
+
+ required:
+ - linux,keycodes
+
+ if:
+ properties:
+ interrupt-names:
+ contains:
+ const: powerkey
+ then:
+ properties:
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: powerkey
+ - const: powerkey_r
+ else:
+ properties:
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: homekey
+ - const: homekey_r
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pmic {
+ compatible = "mediatek,mt6397";
+
+ keys {
+ compatible = "mediatek,mt6397-keys";
+ mediatek,long-press-mode = <1>;
+ power-off-time-sec = <0>;
+
+ key-power {
+ linux,keycodes = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ key-home {
+ linux,keycodes = <KEY_VOLUMEDOWN>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
new file mode 100644
index 000000000..96358b12f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/microchip,cap11xx.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree bindings for Microchip CAP11xx based capacitive touch sensors
+
+description: |
+ The Microchip CAP1xxx Family of RightTouchTM multiple-channel capacitive
+ touch controllers and LED drivers. The device communication via I2C only.
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - microchip,cap1106
+ - microchip,cap1126
+ - microchip,cap1188
+ - microchip,cap1206
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ interrupts:
+ maxItems: 1
+ description: |
+ Property describing the interrupt line the
+ device's ALERT#/CM_IRQ# pin is connected to.
+ The device only has one interrupt source.
+
+ autorepeat:
+ description: |
+ Enables the Linux input system's autorepeat feature on the input device.
+
+ linux,keycodes:
+ minItems: 6
+ maxItems: 6
+ description: |
+ Specifies an array of numeric keycode values to
+ be used for the channels. If this property is
+ omitted, KEY_A, KEY_B, etc are used as defaults.
+ The array must have exactly six entries.
+
+ microchip,sensor-gain:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 1
+ enum: [1, 2, 4, 8]
+ description: |
+ Defines the gain of the sensor circuitry. This
+ effectively controls the sensitivity, as a
+ smaller delta capacitance is required to
+ generate the same delta count values.
+
+ microchip,irq-active-high:
+ type: boolean
+ description: |
+ By default the interrupt pin is active low
+ open drain. This property allows using the active
+ high push-pull output.
+
+patternProperties:
+ "^led@[0-7]$":
+ type: object
+ description: CAP11xx LEDs
+ $ref: /schemas/leds/common.yaml#
+
+ properties:
+ reg:
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+ label: true
+
+ linux,default-trigger: true
+
+ default-state: true
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+allOf:
+ - $ref: input.yaml
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - microchip,cap1106
+ then:
+ patternProperties:
+ "^led@[0-7]$": false
+
+required:
+ - compatible
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touch@28 {
+ compatible = "microchip,cap1188";
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 0>;
+ reg = <0x28>;
+ autorepeat;
+ microchip,sensor-gain = <2>;
+
+ linux,keycodes = <103>, /* KEY_UP */
+ <106>, /* KEY_RIGHT */
+ <108>, /* KEY_DOWN */
+ <105>, /* KEY_LEFT */
+ <109>, /* KEY_PAGEDOWN */
+ <104>; /* KEY_PAGEUP */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ label = "cap11xx:green:usr0";
+ reg = <0>;
+ };
+
+ led@1 {
+ label = "cap11xx:green:usr1";
+ reg = <1>;
+ };
+
+ led@2 {
+ label = "cap11xx:green:alive";
+ reg = <2>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/microchip,qt1050.txt b/Documentation/devicetree/bindings/input/microchip,qt1050.txt
new file mode 100644
index 000000000..80e75f962
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/microchip,qt1050.txt
@@ -0,0 +1,78 @@
+Microchip AT42QT1050 Five-channel Touch Sensor IC
+
+The AT42QT1050 (QT1050) is a QTouchADC sensor device. The device can sense from
+one to five keys, dependent on mode. The QT1050 includes all signal processing
+functions necessary to provide stable sensing under a wide variety of changing
+conditions, and the outputs are fully debounced.
+
+The touchkey device node should be placed inside an I2C bus node.
+
+Required properties:
+- compatible: Must be "microchip,qt1050"
+- reg: The I2C address of the device
+- interrupts: The sink for the touchpad's IRQ output,
+ see ../interrupt-controller/interrupts.txt
+
+Optional properties:
+- wakeup-source: touch keys can be used as a wakeup source
+
+Each button (key) is represented as a sub-node:
+
+Each not specified key or key with linux,code set to KEY_RESERVED gets disabled
+in HW.
+
+Subnode properties:
+- linux,code: Keycode to emit.
+- reg: The key number. Valid values: 0, 1, 2, 3, 4.
+
+Optional subnode-properties:
+
+If a optional property is missing or has a invalid value the default value is
+taken.
+
+- microchip,pre-charge-time-ns:
+ Each touchpad need some time to precharge. The value depends on the mechanical
+ layout.
+ Valid value range: 0 - 637500; values must be a multiple of 2500;
+ default is 0.
+- microchip,average-samples:
+ Number of data samples which are averaged for each read.
+ Valid values: 1, 4, 16, 64, 256, 1024, 4096, 16384; default is 1.
+- microchip,average-scaling:
+ The scaling factor which is used to scale the average-samples.
+ Valid values: 1, 2, 4, 8, 16, 32, 64, 128; default is 1.
+- microchip,threshold:
+ Number of counts to register a touch detection.
+ Valid value range: 0 - 255; default is 20.
+
+Example:
+QT1050 with 3 non continuous keys, key2 and key4 are disabled.
+
+touchkeys@41 {
+ compatible = "microchip,qt1050";
+ reg = <0x41>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+
+ up@0 {
+ reg = <0>;
+ linux,code = <KEY_UP>;
+ microchip,average-samples = <64>;
+ microchip,average-scaling = <16>;
+ microchip,pre-charge-time-ns = <10000>;
+ };
+
+ right@1 {
+ reg = <1>;
+ linux,code = <KEY_RIGHT>;
+ microchip,average-samples = <64>;
+ microchip,average-scaling = <8>;
+ };
+
+ down@3 {
+ reg = <3>;
+ linux,code = <KEY_DOWN>;
+ microchip,average-samples = <256>;
+ microchip,average-scaling = <16>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
new file mode 100644
index 000000000..1faa7292e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
@@ -0,0 +1,55 @@
+* Tegra keyboard controller
+The key controller has maximum 24 pins to make matrix keypad. Any pin
+can be configured as row or column. The maximum column pin can be 8
+and maximum row pins can be 16 for Tegra20/Tegra30.
+
+Required properties:
+- compatible: "nvidia,tegra20-kbc"
+- reg: Register base address of KBC.
+- interrupts: Interrupt number for the KBC.
+- nvidia,kbc-row-pins: The KBC pins which are configured as row. This is an
+ array of pin numbers which is used as rows.
+- nvidia,kbc-col-pins: The KBC pins which are configured as column. This is an
+ array of pin numbers which is used as column.
+- linux,keymap: The keymap for keys as described in the binding document
+ devicetree/bindings/input/matrix-keymap.txt.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - kbc
+
+Optional properties, in addition to those specified by the shared
+matrix-keyboard bindings:
+
+- linux,fn-keymap: a second keymap, same specification as the
+ matrix-keyboard-controller spec but to be used when the KEY_FN modifier
+ key is pressed.
+- nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing
+- nvidia,repeat-delay-ms: delay in milliseconds before repeat starts
+- nvidia,ghost-filter: enable ghost filtering for this device
+- wakeup-source: configure keyboard as a wakeup source for suspend/resume
+ (Legacy property supported: "nvidia,wakeup-source")
+
+Example:
+
+keyboard: keyboard {
+ compatible = "nvidia,tegra20-kbc";
+ reg = <0x7000e200 0x100>;
+ interrupts = <0 85 0x04>;
+ clocks = <&tegra_car 36>;
+ resets = <&tegra_car 36>;
+ reset-names = "kbc";
+ nvidia,ghost-filter;
+ nvidia,debounce-delay-ms = <640>;
+ nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */
+ nvidia,kbc-col-pins = <11 12 13>; /* pin 11, 12, 13 as columns */
+ linux,keymap = <0x00000074
+ 0x00010067
+ 0x00020066
+ 0x01010068
+ 0x02000069
+ 0x02010070
+ 0x02020071>;
+};
diff --git a/Documentation/devicetree/bindings/input/omap-keypad.txt b/Documentation/devicetree/bindings/input/omap-keypad.txt
new file mode 100644
index 000000000..34ed1c60f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/omap-keypad.txt
@@ -0,0 +1,28 @@
+* TI's Keypad Controller device tree bindings
+
+TI's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "ti,omap4-keypad": For controllers compatible with omap4 keypad
+ controller.
+
+Optional Properties specific to linux:
+- linux,keypad-no-autorepeat: do no enable autorepeat feature.
+
+Example:
+ keypad@4ae1c000{
+ compatible = "ti,omap4-keypad";
+ keypad,num-rows = <2>;
+ keypad,num-columns = <8>;
+ linux,keypad-no-autorepeat;
+ };
diff --git a/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
new file mode 100644
index 000000000..e4a0ac0ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pine64,pinephone-keyboard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pine64 PinePhone keyboard device tree bindings
+
+maintainers:
+ - Samuel Holland <samuel@sholland.org>
+
+description:
+ A keyboard accessory is available for the Pine64 PinePhone and PinePhone Pro.
+ It connects via I2C, providing a raw scan matrix, a flashing interface, and a
+ subordinate I2C bus for communication with a battery charger IC.
+
+properties:
+ compatible:
+ const: pine64,pinephone-keyboard
+
+ reg:
+ const: 0x15
+
+ interrupts:
+ maxItems: 1
+
+ vbat-supply:
+ description: Supply for the keyboard MCU
+
+ wakeup-source: true
+
+ i2c:
+ $ref: /schemas/i2c/i2c-controller.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ keyboard@15 {
+ compatible = "pine64,pinephone-keyboard";
+ reg = <0x15>;
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 12 IRQ_TYPE_EDGE_FALLING>; /* PL12 */
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@75 {
+ reg = <0x75>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt b/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt
new file mode 100644
index 000000000..3029c5694
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt
@@ -0,0 +1,16 @@
+Aeroflex Gaisler APBPS2 PS/2 Core, supporting Keyboard or Mouse.
+
+The APBPS2 PS/2 core is available in the GRLIB VHDL IP core library.
+
+Note: In the ordinary environment for the APBPS2 core, a LEON SPARC system,
+these properties are built from information in the AMBA plug&play and from
+bootloader settings.
+
+Required properties:
+
+- name : Should be "GAISLER_APBPS2" or "01_060"
+- reg : Address and length of the register set for the device
+- interrupts : Interrupt numbers for this device
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
new file mode 100644
index 000000000..8fc0e48c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
@@ -0,0 +1,24 @@
+* PWM beeper device tree bindings
+
+Registers a PWM device as beeper.
+
+Required properties:
+- compatible: should be "pwm-beeper"
+- pwms: phandle to the physical PWM device
+
+Optional properties:
+- amp-supply: phandle to a regulator that acts as an amplifier for the beeper
+- beeper-hz: bell frequency in Hz
+
+Example:
+
+beeper_amp: amplifier {
+ compatible = "fixed-regulator";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+beeper {
+ compatible = "pwm-beeper";
+ pwms = <&pwm0>;
+ amp-supply = <&beeper_amp>;
+};
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
new file mode 100644
index 000000000..a70a636ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/pwm-vibrator.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: PWM vibrator
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: >
+ Registers a PWM device as vibrator. It is expected, that the vibrator's
+ strength increases based on the duty cycle of the enable PWM channel
+ (100% duty cycle meaning strongest vibration, 0% meaning no vibration).
+
+ The binding supports an optional direction PWM channel, that can be
+ driven at fixed duty cycle. If available this is can be used to increase
+ the vibration effect of some devices.
+
+properties:
+ compatible:
+ const: pwm-vibrator
+
+ pwm-names:
+ items:
+ - const: enable
+ - const: direction
+ minItems: 1
+
+ pwms:
+ minItems: 1
+ maxItems: 2
+
+ vcc-supply: true
+
+ direction-duty-cycle-ns:
+ description: >
+ Duty cycle of the direction PWM channel in nanoseconds,
+ defaults to 50% of the channel's period.
+
+required:
+ - compatible
+ - pwm-names
+ - pwms
+
+additionalProperties: false
+
+examples:
+ - |
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm9 0 1000000000 0>,
+ <&pwm8 0 1000000000 0>;
+ pwm-names = "enable", "direction";
+ direction-duty-cycle-ns = <1000000000>;
+ };
diff --git a/Documentation/devicetree/bindings/input/pxa27x-keypad.txt b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
new file mode 100644
index 000000000..f8674f7e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
@@ -0,0 +1,60 @@
+* Marvell PXA Keypad controller
+
+Required Properties
+- compatible : should be "marvell,pxa27x-keypad"
+- reg : Address and length of the register set for the device
+- interrupts : The interrupt for the keypad controller
+- marvell,debounce-interval : How long time the key will be
+ recognized when it is pressed. It is a u32 value, and bit[31:16]
+ is debounce interval for direct key and bit[15:0] is debounce
+ interval for matrix key. The value is in binary number of 2ms
+
+Optional Properties For Matrix Keyes
+Please refer to matrix-keymap.txt
+
+Optional Properties for Direct Keyes
+- marvell,direct-key-count : How many direct keyes are used.
+- marvell,direct-key-mask : The mask indicates which keyes
+ are used. If bit[X] of the mask is set, the direct key X
+ is used.
+- marvell,direct-key-low-active : Direct key status register
+ tells the level of pins that connects to the direct keyes.
+ When this property is set, it means that when the pin level
+ is low, the key is pressed(active).
+- marvell,direct-key-map : It is a u16 array. Each item indicates
+ the linux key-code for the direct key.
+
+Optional Properties For Rotary
+- marvell,rotary0 : It is a u32 value. Bit[31:16] is the
+ linux key-code for rotary up. Bit[15:0] is the linux key-code
+ for rotary down. It is for rotary 0.
+- marvell,rotary1 : Same as marvell,rotary0. It is for rotary 1.
+- marvell,rotary-rel-key : When rotary is used for relative axes
+ in the device, the value indicates the key-code for relative
+ axes measurement in the device. It is a u32 value. Bit[31:16]
+ is for rotary 1, and Bit[15:0] is for rotary 0.
+
+Examples:
+ keypad: keypad@d4012000 {
+ keypad,num-rows = <3>;
+ keypad,num-columns = <5>;
+ linux,keymap = <0x0000000e /* KEY_BACKSPACE */
+ 0x0001006b /* KEY_END */
+ 0x00020061 /* KEY_RIGHTCTRL */
+ 0x0003000b /* KEY_0 */
+ 0x00040002 /* KEY_1 */
+ 0x0100008b /* KEY_MENU */
+ 0x01010066 /* KEY_HOME */
+ 0x010200e7 /* KEY_SEND */
+ 0x01030009 /* KEY_8 */
+ 0x0104000a /* KEY_9 */
+ 0x02000160 /* KEY_OK */
+ 0x02010003 /* KEY_2 */
+ 0x02020004 /* KEY_3 */
+ 0x02030005 /* KEY_4 */
+ 0x02040006>; /* KEY_5 */
+ marvell,rotary0 = <0x006c0067>; /* KEY_UP & KEY_DOWN */
+ marvell,direct-key-count = <1>;
+ marvell,direct-key-map = <0x001c>;
+ marvell,debounce-interval = <0x001e001e>;
+ };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
new file mode 100644
index 000000000..62314a5fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8941-pwrkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8941 PMIC Power Key
+
+maintainers:
+ - Courtney Cavin <courtney.cavin@sonymobile.com>
+ - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8941-pwrkey
+ - qcom,pm8941-resin
+ - qcom,pmk8350-pwrkey
+ - qcom,pmk8350-resin
+
+ interrupts:
+ maxItems: 1
+
+ debounce:
+ description: |
+ Time in microseconds that key must be pressed or
+ released for state change interrupt to trigger.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ bias-pull-up:
+ description: |
+ Presence of this property indicates that the KPDPWR_N
+ pin should be configured for pull up.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ linux,code:
+ description: |
+ The input key-code associated with the power key.
+ Use the linux event codes defined in
+ include/dt-bindings/input/linux-event-codes.h
+ When property is omitted KEY_POWER is assumed.
+
+required:
+ - compatible
+ - interrupts
+
+unevaluatedProperties: false
+...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
new file mode 100644
index 000000000..4a9dc6ba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
@@ -0,0 +1,90 @@
+Qualcomm PM8xxx PMIC Keypad
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,pm8058-keypad"
+ "qcom,pm8921-keypad"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: address of keypad control register
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the first interrupt specifies the key sense interrupt
+ and the second interrupt specifies the key stuck interrupt.
+ The format of the specifier is defined by the binding
+ document describing the node's interrupt parent.
+
+- linux,keymap:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the linux keymap. More information can be found in
+ input/matrix-keymap.txt.
+
+- linux,keypad-no-autorepeat:
+ Usage: optional
+ Value type: <bool>
+ Definition: don't enable autorepeat feature.
+
+- wakeup-source:
+ Usage: optional
+ Value type: <bool>
+ Definition: use any event on keypad as wakeup event.
+ (Legacy property supported: "linux,keypad-wakeup")
+
+- keypad,num-rows:
+ Usage: required
+ Value type: <u32>
+ Definition: number of rows in the keymap. More information can be found
+ in input/matrix-keymap.txt.
+
+- keypad,num-columns:
+ Usage: required
+ Value type: <u32>
+ Definition: number of columns in the keymap. More information can be
+ found in input/matrix-keymap.txt.
+
+- debounce:
+ Usage: optional
+ Value type: <u32>
+ Definition: time in microseconds that key must be pressed or release
+ for key sense interrupt to trigger.
+
+- scan-delay:
+ Usage: optional
+ Value type: <u32>
+ Definition: time in microseconds to pause between successive scans
+ of the matrix array.
+
+- row-hold:
+ Usage: optional
+ Value type: <u32>
+ Definition: time in nanoseconds to pause between scans of each row in
+ the matrix array.
+
+EXAMPLE
+
+ keypad@148 {
+ compatible = "qcom,pm8921-keypad";
+ reg = <0x148>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <74 1>, <75 1>;
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+ MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(0, 3, KEY_CAMERA)
+ >;
+ keypad,num-rows = <1>;
+ keypad,num-columns = <5>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
new file mode 100644
index 000000000..588536cc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
@@ -0,0 +1,46 @@
+Qualcomm PM8xxx PMIC Power Key
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,pm8058-pwrkey"
+ "qcom,pm8921-pwrkey"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: address of power key control register
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the first interrupt specifies the key release interrupt
+ and the second interrupt specifies the key press interrupt.
+ The format of the specifier is defined by the binding
+ document describing the node's interrupt parent.
+
+- debounce:
+ Usage: optional
+ Value type: <u32>
+ Definition: time in microseconds that key must be pressed or release
+ for state change interrupt to trigger.
+
+- pull-up:
+ Usage: optional
+ Value type: <empty>
+ Definition: presence of this property indicates that the KPDPWR_N pin
+ should be configured for pull up.
+
+EXAMPLE
+
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <50 1>, <51 1>;
+ debounce = <15625>;
+ pull-up;
+ };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
new file mode 100644
index 000000000..c8832cd0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8xxx-vib.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC Vibrator
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8058-vib
+ - qcom,pm8916-vib
+ - qcom,pm8921-vib
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vibrator@4a {
+ compatible = "qcom,pm8058-vib";
+ reg = <0x4a>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt b/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt
new file mode 100644
index 000000000..99a4f2ab5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt
@@ -0,0 +1,19 @@
+Raydium I2C touchscreen
+
+Required properties:
+- compatible: must be "raydium,rm32380"
+- reg: The I2C address of the device
+- interrupts: interrupt to which the chip is connected
+ See ../interrupt-controller/interrupts.txt
+Optional properties:
+- avdd-supply: analog power supply needed to power device
+- vccio-supply: IO Power source
+- reset-gpios: reset gpio the chip is connected to.
+
+Example:
+ touchscreen@39 {
+ compatible = "raydium,rm32380";
+ reg = <0x39>;
+ interrupt-parent = <&gpio>;
+ interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+ };
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.yaml b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
new file mode 100644
index 000000000..627891e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/regulator-haptic.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Regulator Haptic
+
+maintainers:
+ - Jaewon Kim <jaewon02.kim@samsung.com>
+
+properties:
+ compatible:
+ const: regulator-haptic
+
+ haptic-supply:
+ description: >
+ Power supply to the haptic motor
+
+ max-microvolt:
+ description: >
+ The maximum voltage value supplied to the haptic motor
+
+ min-microvolt:
+ description: >
+ The minimum voltage value supplied to the haptic motor
+
+required:
+ - compatible
+ - haptic-supply
+ - max-microvolt
+ - min-microvolt
+
+additionalProperties: false
+
+examples:
+ - |
+ haptics {
+ compatible = "regulator-haptic";
+ haptic-supply = <&motor_regulator>;
+ max-microvolt = <2700000>;
+ min-microvolt = <1100000>;
+ };
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
new file mode 100644
index 000000000..9afffbdf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
@@ -0,0 +1,56 @@
+Synaptics RMI4 2D Sensor Device Binding
+
+The Synaptics RMI4 core is able to support RMI4 devices using different
+transports and different functions. This file describes the device tree
+bindings for devices which contain 2D sensors using Function 11 or
+Function 12. Complete documentation for transports and other functions
+can be found in:
+Documentation/devicetree/bindings/input/rmi4.
+
+RMI4 Function 11 and Function 12 are for 2D touch position sensing.
+Additional documentation for F11 can be found at:
+http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
+
+Optional Touch Properties:
+Description in Documentation/devicetree/bindings/input/touchscreen
+- touchscreen-inverted-x
+- touchscreen-inverted-y
+- touchscreen-swapped-x-y
+- touchscreen-x-mm
+- touchscreen-y-mm
+
+Optional Properties:
+- syna,clip-x-low: Sets a minimum value for X.
+- syna,clip-y-low: Sets a minimum value for Y.
+- syna,clip-x-high: Sets a maximum value for X.
+- syna,clip-y-high: Sets a maximum value for Y.
+- syna,offset-x: Add an offset to X.
+- syna,offset-y: Add an offset to Y.
+- syna,delta-x-threshold: Set the minimum distance on the X axis required
+ to generate an interrupt in reduced reporting
+ mode.
+- syna,delta-y-threshold: Set the minimum distance on the Y axis required
+ to generate an interrupt in reduced reporting
+ mode.
+- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad.
+- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to
+ disable reporing absolute position data.
+- syna,rezero-wait-ms: Time in miliseconds to wait after issuing a rezero
+ command.
+
+
+Example of a RMI4 I2C device with F11:
+Example:
+ &i2c1 {
+ rmi4-i2c-dev@2c {
+ compatible = "syna,rmi4-i2c";
+
+ ...
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-y;
+ syna,sensor-type = <2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
new file mode 100644
index 000000000..079cad2b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
@@ -0,0 +1,39 @@
+Synaptics RMI4 F01 Device Binding
+
+The Synaptics RMI4 core is able to support RMI4 devices using different
+transports and different functions. This file describes the device tree
+bindings for devices which contain Function 1. Complete documentation
+for transports and other functions can be found in:
+Documentation/devicetree/bindings/input/rmi4.
+
+Additional documentation for F01 can be found at:
+http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
+
+Optional Properties:
+- syna,nosleep-mode: If set the device will run at full power without sleeping.
+ nosleep has 3 modes, 0 will not change the default
+ setting, 1 will disable nosleep (allow sleeping),
+ and 2 will enable nosleep (disabling sleep).
+- syna,wakeup-threshold: Defines the amplitude of the disturbance to the
+ background capacitance that will cause the
+ device to wake from dozing.
+- syna,doze-holdoff-ms: The delay to wait after the last finger lift and the
+ first doze cycle.
+- syna,doze-interval-ms: The time period that the device sleeps between finger
+ activity.
+
+
+Example of a RMI4 I2C device with F01:
+ Example:
+ &i2c1 {
+ rmi4-i2c-dev@2c {
+ compatible = "syna,rmi4-i2c";
+
+ ...
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
new file mode 100644
index 000000000..dcb012f5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
@@ -0,0 +1,61 @@
+Synaptics RMI4 I2C Device Binding
+
+The Synaptics RMI4 core is able to support RMI4 devices using different
+transports and different functions. This file describes the device tree
+bindings for devices using the I2C transport driver. Complete documentation
+for other transports and functions can be found in
+Documentation/devicetree/bindings/input/rmi4.
+
+Required Properties:
+- compatible: syna,rmi4-i2c
+- reg: I2C address
+- #address-cells: Set to 1 to indicate that the function child nodes
+ consist of only on uint32 value.
+- #size-cells: Set to 0 to indicate that the function child nodes do not
+ have a size property.
+
+Optional Properties:
+- interrupts: interrupt which the rmi device is connected to.
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+- syna,reset-delay-ms: The number of milliseconds to wait after resetting the
+ device.
+
+- syna,startup-delay-ms: The number of milliseconds to wait after powering on
+ the device.
+
+- vdd-supply: VDD power supply.
+See ../regulator/regulator.txt
+
+- vio-supply: VIO power supply
+See ../regulator/regulator.txt
+
+Function Parameters:
+Parameters specific to RMI functions are contained in child nodes of the rmi device
+ node. Documentation for the parameters of each function can be found in:
+Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt.
+
+
+
+Example:
+ &i2c1 {
+ rmi4-i2c-dev@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <4 2>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-y;
+ syna,sensor-type = <2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
new file mode 100644
index 000000000..632f473db
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
@@ -0,0 +1,56 @@
+Synaptics RMI4 SPI Device Binding
+
+The Synaptics RMI4 core is able to support RMI4 devices using different
+transports and different functions. This file describes the device tree
+bindings for devices using the SPI transport driver. Complete documentation
+for other transports and functions can be found in
+Documentation/devicetree/bindings/input/rmi4.
+
+Required Properties:
+- compatible: syna,rmi4-spi
+- reg: Chip select address for the device
+- #address-cells: Set to 1 to indicate that the function child nodes
+ consist of only on uint32 value.
+- #size-cells: Set to 0 to indicate that the function child nodes do not
+ have a size property.
+
+Optional Properties:
+- interrupts: interrupt which the rmi device is connected to.
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+- spi-rx-delay-us: microsecond delay after a read transfer.
+- spi-tx-delay-us: microsecond delay after a write transfer.
+
+Function Parameters:
+Parameters specific to RMI functions are contained in child nodes of the rmi device
+ node. Documentation for the parameters of each function can be found in:
+Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt.
+
+
+
+Example:
+ spi@7000d800 {
+ rmi4-spi-dev@0 {
+ compatible = "syna,rmi4-spi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <4000000>;
+ spi-cpha;
+ spi-cpol;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(K, 2) 0x2>;
+ spi-rx-delay-us = <30>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-y;
+ syna,sensor-type = <2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt
new file mode 100644
index 000000000..a644408b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt
@@ -0,0 +1,50 @@
+Rotary encoder DT bindings
+
+Required properties:
+- gpios: a spec for at least two GPIOs to be used, most significant first
+
+Optional properties:
+- linux,axis: the input subsystem axis to map to this rotary encoder.
+ Defaults to 0 (ABS_X / REL_X)
+- rotary-encoder,steps: Number of steps in a full turnaround of the
+ encoder. Only relevant for absolute axis. Defaults to 24 which is a
+ typical value for such devices.
+- rotary-encoder,relative-axis: register a relative axis rather than an
+ absolute one. Relative axis will only generate +1/-1 events on the input
+ device, hence no steps need to be passed.
+- rotary-encoder,rollover: Automatic rollover when the rotary value becomes
+ greater than the specified steps or smaller than 0. For absolute axis only.
+- rotary-encoder,steps-per-period: Number of steps (stable states) per period.
+ The values have the following meaning:
+ 1: Full-period mode (default)
+ 2: Half-period mode
+ 4: Quarter-period mode
+- wakeup-source: Boolean, rotary encoder can wake up the system.
+- rotary-encoder,encoding: String, the method used to encode steps.
+ Supported are "gray" (the default and more common) and "binary".
+
+Deprecated properties:
+- rotary-encoder,half-period: Makes the driver work on half-period mode.
+ This property is deprecated. Instead, a 'steps-per-period ' value should
+ be used, such as "rotary-encoder,steps-per-period = <2>".
+
+See Documentation/input/devices/rotary-encoder.rst for more information.
+
+Example:
+
+ rotary@0 {
+ compatible = "rotary-encoder";
+ gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */
+ linux,axis = <0>; /* REL_X */
+ rotary-encoder,encoding = "gray";
+ rotary-encoder,relative-axis;
+ };
+
+ rotary@1 {
+ compatible = "rotary-encoder";
+ gpios = <&gpio 21 0>, <&gpio 22 0>;
+ linux,axis = <1>; /* ABS_Y */
+ rotary-encoder,steps = <24>;
+ rotary-encoder,encoding = "binary";
+ rotary-encoder,rollover;
+ };
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
new file mode 100644
index 000000000..4c5c0a825
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -0,0 +1,77 @@
+* Samsung's Keypad Controller device tree bindings
+
+Samsung's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad
+ controller.
+ - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad
+ controller.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu.
+
+Required Board Specific Properties:
+- samsung,keypad-num-rows: Number of row lines connected to the keypad
+ controller.
+
+- samsung,keypad-num-columns: Number of column lines connected to the
+ keypad controller.
+
+- Keys represented as child nodes: Each key connected to the keypad
+ controller is represented as a child node to the keypad controller
+ device node and should include the following properties.
+ - keypad,row: the row number to which the key is connected.
+ - keypad,column: the column number to which the key is connected.
+ - linux,code: the key-code to be reported when the key is pressed
+ and released.
+
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
+Optional Properties:
+- wakeup-source: use any event on keypad as wakeup event.
+ (Legacy property supported: "linux,input-wakeup")
+
+Optional Properties specific to linux:
+- linux,keypad-no-autorepeat: do no enable autorepeat feature.
+
+
+Example:
+ keypad@100a0000 {
+ compatible = "samsung,s5pv210-keypad";
+ reg = <0x100A0000 0x100>;
+ interrupts = <173>;
+ samsung,keypad-num-rows = <2>;
+ samsung,keypad-num-columns = <8>;
+ linux,input-no-autorepeat;
+ wakeup-source;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_rows &keypad_columns>;
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <3>;
+ linux,code = <2>;
+ };
+
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <4>;
+ linux,code = <3>;
+ };
+
+ key_3 {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
new file mode 100644
index 000000000..70c142503
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
@@ -0,0 +1 @@
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
diff --git a/Documentation/devicetree/bindings/input/spear-keyboard.txt b/Documentation/devicetree/bindings/input/spear-keyboard.txt
new file mode 100644
index 000000000..4a846d26d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/spear-keyboard.txt
@@ -0,0 +1,20 @@
+* SPEAr keyboard controller
+
+Required properties:
+- compatible: "st,spear300-kbd"
+
+Optional properties, in addition to those specified by the shared
+matrix-keyboard bindings:
+- autorepeat: bool: enables key autorepeat
+- st,mode: keyboard mode: 0 - 9x9, 1 - 6x6, 2 - 2x2
+
+Example:
+
+kbd@fc400000 {
+ compatible = "st,spear300-kbd";
+ reg = <0xfc400000 0x100>;
+ linux,keymap = < 0x00030012
+ 0x0102003a >;
+ autorepeat;
+ st,mode = <0>;
+};
diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
new file mode 100644
index 000000000..a401a0bfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/sprd,sc27xx-vibrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27xx PMIC Vibrator
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - sprd,sc2721-vibrator
+ - sprd,sc2730-vibrator
+ - sprd,sc2731-vibrator
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0 0>;
+ spi-max-frequency = <26000000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vibrator@eb4 {
+ compatible = "sprd,sc2731-vibrator";
+ reg = <0xeb4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/st-keyscan.txt b/Documentation/devicetree/bindings/input/st-keyscan.txt
new file mode 100644
index 000000000..51eb428e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/st-keyscan.txt
@@ -0,0 +1,60 @@
+* ST Keyscan controller Device Tree bindings
+
+The ST keyscan controller Device Tree binding is based on the
+matrix-keymap.
+
+Required properties:
+- compatible: "st,sti-keyscan"
+
+- reg: Register base address and size of st-keyscan controller.
+
+- interrupts: Interrupt number for the st-keyscan controller.
+
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+
+- pinctrl: Should specify pin control groups used for this controller.
+ See ../pinctrl/pinctrl-bindings.txt for details.
+
+- linux,keymap: The keymap for keys as described in the binding document
+ devicetree/bindings/input/matrix-keymap.txt.
+
+- keypad,num-rows: Number of row lines connected to the keypad controller.
+
+- keypad,num-columns: Number of column lines connected to the keypad
+ controller.
+
+Optional property:
+- st,debounce_us: Debouncing interval time in microseconds
+
+Example:
+
+keyscan: keyscan@fe4b0000 {
+ compatible = "st,sti-keyscan";
+ reg = <0xfe4b0000 0x2000>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+ clocks = <&CLK_SYSIN>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_keyscan>;
+
+ keypad,num-rows = <4>;
+ keypad,num-columns = <4>;
+ st,debounce_us = <5000>;
+
+ linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
+ MATRIX_KEY(0x00, 0x01, KEY_F9)
+ MATRIX_KEY(0x00, 0x02, KEY_F5)
+ MATRIX_KEY(0x00, 0x03, KEY_F1)
+ MATRIX_KEY(0x01, 0x00, KEY_F14)
+ MATRIX_KEY(0x01, 0x01, KEY_F10)
+ MATRIX_KEY(0x01, 0x02, KEY_F6)
+ MATRIX_KEY(0x01, 0x03, KEY_F2)
+ MATRIX_KEY(0x02, 0x00, KEY_F15)
+ MATRIX_KEY(0x02, 0x01, KEY_F11)
+ MATRIX_KEY(0x02, 0x02, KEY_F7)
+ MATRIX_KEY(0x02, 0x03, KEY_F3)
+ MATRIX_KEY(0x03, 0x00, KEY_F16)
+ MATRIX_KEY(0x03, 0x01, KEY_F12)
+ MATRIX_KEY(0x03, 0x02, KEY_F8)
+ MATRIX_KEY(0x03, 0x03, KEY_F4) >;
+ };
diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
new file mode 100644
index 000000000..12bb771d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
@@ -0,0 +1,41 @@
+* STMPE Keypad
+
+Required properties:
+ - compatible : "st,stmpe-keypad"
+ - linux,keymap : See ./matrix-keymap.txt
+
+Optional properties:
+ - debounce-interval : Debouncing interval time in milliseconds
+ - st,scan-count : Scanning cycles elapsed before key data is updated
+ - st,no-autorepeat : If specified device will not autorepeat
+ - keypad,num-rows : See ./matrix-keymap.txt
+ - keypad,num-columns : See ./matrix-keymap.txt
+
+Example:
+
+ stmpe_keypad {
+ compatible = "st,stmpe-keypad";
+
+ debounce-interval = <64>;
+ st,scan-count = <8>;
+ st,no-autorepeat;
+
+ linux,keymap = <0x205006b
+ 0x4010074
+ 0x3050072
+ 0x1030004
+ 0x502006a
+ 0x500000a
+ 0x5008b
+ 0x706001c
+ 0x405000b
+ 0x6070003
+ 0x3040067
+ 0x303006c
+ 0x60400e7
+ 0x602009e
+ 0x4020073
+ 0x5050002
+ 0x4030069
+ 0x3020008>;
+ };
diff --git a/Documentation/devicetree/bindings/input/tca8418_keypad.txt b/Documentation/devicetree/bindings/input/tca8418_keypad.txt
new file mode 100644
index 000000000..255185009
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/tca8418_keypad.txt
@@ -0,0 +1,10 @@
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
+
+Required properties:
+- compatible: "ti,tca8418"
+- reg: the I2C address
+- interrupts: IRQ line number, should trigger on falling edge
+- linux,keymap: Keys definitions, see keypad-matrix.
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt
new file mode 100644
index 000000000..4c5312eaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt
@@ -0,0 +1,50 @@
+* Texas Instruments - drv260x Haptics driver family
+
+Required properties:
+ - compatible - One of:
+ "ti,drv2604" - DRV2604
+ "ti,drv2605" - DRV2605
+ "ti,drv2605l" - DRV2605L
+ - reg - I2C slave address
+ - vbat-supply - Required supply regulator
+ - mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h)
+ DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric)
+ DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration
+ sequence during init. And the device is configured for real
+ time playback mode (RTP mode).
+ DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator)
+ - library-sel - These are ROM based waveforms pre-programmed into the IC.
+ This should be set to set the library to use at power up.
+ (defined in include/dt-bindings/input/ti-drv260x.h)
+ DRV260X_LIB_EMPTY - Do not use a pre-programmed library
+ DRV260X_ERM_LIB_A - Pre-programmed Library
+ DRV260X_ERM_LIB_B - Pre-programmed Library
+ DRV260X_ERM_LIB_C - Pre-programmed Library
+ DRV260X_ERM_LIB_D - Pre-programmed Library
+ DRV260X_ERM_LIB_E - Pre-programmed Library
+ DRV260X_ERM_LIB_F - Pre-programmed Library
+ DRV260X_LIB_LRA - Pre-programmed LRA Library
+
+Optional properties:
+ - enable-gpio - gpio pin to enable/disable the device.
+ - vib-rated-mv - The rated voltage of the actuator in millivolts.
+ If this is not set then the value will be defaulted to
+ 3.2 v.
+ - vib-overdrive-mv - The overdrive voltage of the actuator in millivolts.
+ If this is not set then the value will be defaulted to
+ 3.2 v.
+Example:
+
+haptics: haptics@5a {
+ compatible = "ti,drv2605l";
+ reg = <0x5a>;
+ vbat-supply = <&vbat>;
+ enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ mode = <DRV260X_LRA_MODE>;
+ library-sel = <DRV260X_LIB_LRA>;
+ vib-rated-mv = <3200>;
+ vib-overdrive-mv = <3200>;
+}
+
+For more product information please see the link below:
+http://www.ti.com/product/drv2605
diff --git a/Documentation/devicetree/bindings/input/ti,drv2665.txt b/Documentation/devicetree/bindings/input/ti,drv2665.txt
new file mode 100644
index 000000000..1ba97ac04
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv2665.txt
@@ -0,0 +1,17 @@
+* Texas Instruments - drv2665 Haptics driver
+
+Required properties:
+ - compatible - "ti,drv2665" - DRV2665
+ - reg - I2C slave address
+ - vbat-supply - Required supply regulator
+
+Example:
+
+haptics: haptics@59 {
+ compatible = "ti,drv2665";
+ reg = <0x59>;
+ vbat-supply = <&vbat>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/drv2665
diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
new file mode 100644
index 000000000..996382cf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt
@@ -0,0 +1,17 @@
+* Texas Instruments - drv2667 Haptics driver
+
+Required properties:
+ - compatible - "ti,drv2667" - DRV2667
+ - reg - I2C slave address
+ - vbat-supply - Required supply regulator
+
+Example:
+
+haptics: haptics@59 {
+ compatible = "ti,drv2667";
+ reg = <0x59>;
+ vbat-supply = <&vbat>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/drv2667
diff --git a/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt b/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
new file mode 100644
index 000000000..513d94d6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
@@ -0,0 +1,60 @@
+TI-NSPIRE Keypad
+
+Required properties:
+- compatible: Compatible property value should be "ti,nspire-keypad".
+
+- reg: Physical base address of the peripheral and length of memory mapped
+ region.
+
+- interrupts: The interrupt number for the peripheral.
+
+- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the
+ maximum and minimum delay time is ~2000us and ~500us respectively
+
+- row-delay: How long to wait before scanning each row.
+
+- clocks: The clock this peripheral is attached to.
+
+- linux,keymap: The keymap to use
+ (see Documentation/devicetree/bindings/input/matrix-keymap.txt)
+
+Optional properties:
+- active-low: Specify that the keypad is active low (i.e. logical low signifies
+ a key press).
+
+Example:
+
+input {
+ compatible = "ti,nspire-keypad";
+ reg = <0x900E0000 0x1000>;
+ interrupts = <16>;
+
+ scan-interval = <1000>;
+ row-delay = <200>;
+
+ clocks = <&apb_pclk>;
+
+ linux,keymap = <
+ 0x0000001c 0x0001001c 0x00040039
+ 0x0005002c 0x00060015 0x0007000b
+ 0x0008000f 0x0100002d 0x01010011
+ 0x0102002f 0x01030004 0x01040016
+ 0x01050014 0x0106001f 0x01070002
+ 0x010a006a 0x02000013 0x02010010
+ 0x02020019 0x02030007 0x02040018
+ 0x02050031 0x02060032 0x02070005
+ 0x02080028 0x0209006c 0x03000026
+ 0x03010025 0x03020024 0x0303000a
+ 0x03040017 0x03050023 0x03060022
+ 0x03070008 0x03080035 0x03090069
+ 0x04000021 0x04010012 0x04020020
+ 0x0404002e 0x04050030 0x0406001e
+ 0x0407000d 0x04080037 0x04090067
+ 0x05010038 0x0502000c 0x0503001b
+ 0x05040034 0x0505001a 0x05060006
+ 0x05080027 0x0509000e 0x050a006f
+ 0x0600002b 0x0602004e 0x06030068
+ 0x06040003 0x0605006d 0x06060009
+ 0x06070001 0x0609000f 0x0708002a
+ 0x0709001d 0x070a0033 >;
+};
diff --git a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
new file mode 100644
index 000000000..c829e18e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
@@ -0,0 +1,35 @@
+Texas Instruments Palmas family power button module
+
+This module is part of the Palmas family of PMICs. For more details
+about the whole chip see:
+Documentation/devicetree/bindings/mfd/palmas.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+ - "ti,palmas-pwrbutton": For Palmas compatible power on button
+- interrupts: Interrupt number of power button submodule on device.
+
+Optional Properties:
+
+- ti,palmas-long-press-seconds: Duration in seconds which the power
+ button should be kept pressed for Palmas to power off automatically.
+ NOTE: This depends on OTP support and POWERHOLD signal configuration
+ on platform. Valid values are 6, 8, 10 and 12.
+- ti,palmas-pwron-debounce-milli-seconds: Duration in milliseconds
+ which the power button should be kept pressed for Palmas to register
+ a press for debouncing purposes. NOTE: This depends on specific
+ Palmas variation capability. Valid values are 15, 100, 500 and 1000.
+
+Example:
+
+&palmas {
+ palmas_pwr_button: pwrbutton {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ ti,palmas-long-press-seconds = <12>;
+ ti,palmas-pwron-debounce-milli-seconds = <15>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
new file mode 100644
index 000000000..afa38dc06
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
@@ -0,0 +1,71 @@
+* Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
+
+Required properties:
+- compatible : for SPI slave, use "adi,ad7879"
+ for I2C slave, use "adi,ad7879-1"
+- reg : SPI chipselect/I2C slave address
+ See spi-bus.txt for more SPI slave properties
+- interrupts : touch controller interrupt
+- touchscreen-max-pressure : maximum reported pressure
+- adi,resistance-plate-x : total resistance of X-plate (for pressure
+ calculation)
+Optional properties:
+- touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
+- adi,first-conversion-delay : 0-12: In 128us steps (starting with 128us)
+ 13 : 2.560ms
+ 14 : 3.584ms
+ 15 : 4.096ms
+ This property has to be a '/bits/ 8' value
+- adi,acquisition-time : 0: 2us
+ 1: 4us
+ 2: 8us
+ 3: 16us
+ This property has to be a '/bits/ 8' value
+- adi,median-filter-size : 0: disabled
+ 1: 4 measurements
+ 2: 8 measurements
+ 3: 16 measurements
+ This property has to be a '/bits/ 8' value
+- adi,averaging : 0: 2 middle values (1 if median disabled)
+ 1: 4 middle values
+ 2: 8 middle values
+ 3: 16 values
+ This property has to be a '/bits/ 8' value
+- adi,conversion-interval: : 0 : convert one time only
+ 1-255: 515us + val * 35us (up to 9.440ms)
+ This property has to be a '/bits/ 8' value
+- gpio-controller : Switch AUX/VBAT/GPIO pin to GPIO mode
+
+Example:
+
+ touchscreen0@2c {
+ compatible = "adi,ad7879-1";
+ reg = <0x2c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-max-pressure = <4096>;
+ adi,resistance-plate-x = <120>;
+ adi,first-conversion-delay = /bits/ 8 <3>;
+ adi,acquisition-time = /bits/ 8 <1>;
+ adi,median-filter-size = /bits/ 8 <2>;
+ adi,averaging = /bits/ 8 <1>;
+ adi,conversion-interval = /bits/ 8 <255>;
+ };
+
+ touchscreen1@1 {
+ compatible = "adi,ad7879";
+ spi-max-frequency = <5000000>;
+ reg = <1>;
+ spi-cpol;
+ spi-cpha;
+ gpio-controller;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-max-pressure = <4096>;
+ adi,resistance-plate-x = <120>;
+ adi,first-conversion-delay = /bits/ 8 <3>;
+ adi,acquisition-time = /bits/ 8 <1>;
+ adi,median-filter-size = /bits/ 8 <2>;
+ adi,averaging = /bits/ 8 <1>;
+ adi,conversion-interval = /bits/ 8 <255>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
new file mode 100644
index 000000000..81f6bda97
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
@@ -0,0 +1,106 @@
+Device tree bindings for TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046
+SPI driven touch screen controllers.
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in
+
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+must be specified.
+
+Additional required properties:
+
+ compatible Must be one of the following, depending on the
+ model:
+ "ti,tsc2046"
+ "ti,ads7843"
+ "ti,ads7845"
+ "ti,ads7846"
+ "ti,ads7873"
+
+ interrupts An interrupt node describing the IRQ line the chip's
+ !PENIRQ pin is connected to.
+ vcc-supply A regulator node for the supply voltage.
+
+
+Optional properties:
+
+ ti,vref-delay-usecs vref supply delay in usecs, 0 for
+ external vref (u16).
+ ti,vref-mv The VREF voltage, in millivolts (u16).
+ Set to 0 to use internal references
+ (ADS7846).
+ ti,keep-vref-on set to keep vref on for differential
+ measurements as well
+ ti,settle-delay-usec Settling time of the analog signals;
+ a function of Vcc and the capacitance
+ on the X/Y drivers. If set to non-zero,
+ two samples are taken with settle_delay
+ us apart, and the second one is used.
+ ~150 uSec with 0.01uF caps (u16).
+ ti,penirq-recheck-delay-usecs If set to non-zero, after samples are
+ taken this delay is applied and penirq
+ is rechecked, to help avoid false
+ events. This value is affected by the
+ material used to build the touch layer
+ (u16).
+ ti,x-plate-ohms Resistance of the X-plate,
+ in Ohms (u16).
+ ti,y-plate-ohms Resistance of the Y-plate,
+ in Ohms (u16).
+ ti,x-min Minimum value on the X axis (u16).
+ ti,y-min Minimum value on the Y axis (u16).
+ ti,debounce-tol Tolerance used for filtering (u16).
+ ti,debounce-rep Additional consecutive good readings
+ required after the first two (u16).
+ ti,pendown-gpio-debounce Platform specific debounce time for the
+ pendown-gpio (u32).
+ pendown-gpio GPIO handle describing the pin the !PENIRQ
+ line is connected to.
+ wakeup-source use any event on touchscreen as wakeup event.
+ (Legacy property support: "linux,wakeup")
+ touchscreen-size-x General touchscreen binding, see [1].
+ touchscreen-size-y General touchscreen binding, see [1].
+ touchscreen-max-pressure General touchscreen binding, see [1].
+ touchscreen-min-pressure General touchscreen binding, see [1].
+ touchscreen-average-samples General touchscreen binding, see [1].
+ touchscreen-inverted-x General touchscreen binding, see [1].
+ touchscreen-inverted-y General touchscreen binding, see [1].
+ touchscreen-swapped-x-y General touchscreen binding, see [1].
+
+[1] All general touchscreen properties are described in
+ Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
+
+Deprecated properties:
+
+ ti,swap-xy swap x and y axis
+ ti,x-max Maximum value on the X axis (u16).
+ ti,y-max Maximum value on the Y axis (u16).
+ ti,pressure-min Minimum reported pressure value
+ (threshold) - u16.
+ ti,pressure-max Maximum reported pressure value (u16).
+ ti,debounce-max Max number of additional readings per
+ sample (u16).
+
+Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
+
+ spi_controller {
+ tsc2046@0 {
+ reg = <0>; /* CS0 */
+ compatible = "ti,tsc2046";
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 0>; /* BOOT6 / GPIO 8 */
+ spi-max-frequency = <1000000>;
+ pendown-gpio = <&gpio1 8 0>;
+ vcc-supply = <&reg_vcc3>;
+
+ ti,x-min = /bits/ 16 <0>;
+ ti,x-max = /bits/ 16 <8000>;
+ ti,y-min = /bits/ 16 <0>;
+ ti,y-max = /bits/ 16 <4800>;
+ ti,x-plate-ohms = /bits/ 16 <40>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ wakeup-source;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
new file mode 100644
index 000000000..82019bd60
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
@@ -0,0 +1,15 @@
+* Microchip AR1020 and AR1021 touchscreen interface (I2C)
+
+Required properties:
+- compatible : "microchip,ar1021-i2c"
+- reg : I2C slave address
+- interrupts : touch controller interrupt
+
+Example:
+
+ touchscreen@4d {
+ compatible = "microchip,ar1021-i2c";
+ reg = <0x4d>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
new file mode 100644
index 000000000..b8db975e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
@@ -0,0 +1,30 @@
+* AUO in-cell touchscreen controller using Pixcir sensors
+
+Required properties:
+- compatible: must be "auo,auo_pixcir_ts"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- gpios: gpios the chip is connected to
+ first one is the interrupt gpio and second one the reset gpio
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Example:
+
+ i2c@00000000 {
+ /* ... */
+
+ auo_pixcir_ts@5c {
+ compatible = "auo,auo_pixcir_ts";
+ reg = <0x5c>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpios = <&gpf 2 0 GPIO_LEVEL_HIGH>, /* INT */
+ <&gpf 5 1 GPIO_LEVEL_LOW>; /* RST */
+
+ x-size = <800>;
+ y-size = <600>;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml
new file mode 100644
index 000000000..b5f377215
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs5xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
+
+maintainers:
+ - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+ The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers
+ employ projected-capacitance sensing and can track up to five independent
+ contacts.
+
+ Link to datasheet: https://www.azoteq.com/
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - azoteq,iqs550
+ - azoteq,iqs572
+ - azoteq,iqs525
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ wakeup-source: true
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@74 {
+ compatible = "azoteq,iqs550";
+ reg = <0x74>;
+ interrupt-parent = <&gpio>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpio 22 (GPIO_ACTIVE_LOW |
+ GPIO_PUSH_PULL)>;
+
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
new file mode 100644
index 000000000..f127a2117
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
@@ -0,0 +1,87 @@
+* Broadcom's IPROC Touchscreen Controller
+
+Required properties:
+- compatible: must be "brcm,iproc-touchscreen"
+- ts_syscon: handler of syscon node defining physical base
+ address of the controller and length of memory mapped region.
+ If this property is selected please make sure MFD_SYSCON config
+ is enabled in the defconfig file.
+- clocks: The clock provided by the SOC to driver the tsc
+- clock-names: name for the clock
+- interrupts: The touchscreen controller's interrupt
+- address-cells: Specify the number of u32 entries needed in child nodes.
+ Should set to 1.
+- size-cells: Specify number of u32 entries needed to specify child nodes size
+ in reg property. Should set to 1.
+
+Optional properties:
+- scanning_period: Time between scans. Each step is 1024 us. Valid 1-256.
+- debounce_timeout: Each step is 512 us. Valid 0-255
+- settling_timeout: The settling duration (in ms) is the amount of time
+ the tsc waits to allow the voltage to settle after
+ turning on the drivers in detection mode.
+ Valid values: 0-11
+ 0 = 0.008 ms
+ 1 = 0.01 ms
+ 2 = 0.02 ms
+ 3 = 0.04 ms
+ 4 = 0.08 ms
+ 5 = 0.16 ms
+ 6 = 0.32 ms
+ 7 = 0.64 ms
+ 8 = 1.28 ms
+ 9 = 2.56 ms
+ 10 = 5.12 ms
+ 11 = 10.24 ms
+- touch_timeout: The continuous number of scan periods in which touch is
+ not detected before the controller returns to idle state.
+ Valid values 0-255.
+- average_data: Number of data samples which are averaged before a final
+ data point is placed into the FIFO
+ Valid values 0-7
+ 0 = 1 sample
+ 1 = 2 samples
+ 2 = 4 samples
+ 3 = 8 samples
+ 4 = 16 samples
+ 5 = 32 samples
+ 6 = 64 samples
+ 7 = 128 samples
+- fifo_threshold: Interrupt is generated whenever the number of fifo
+ entries exceeds this value
+ Valid values 0-31
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+- touchscreen-fuzz-x: horizontal noise value of the absolute input
+ device (in pixels)
+- touchscreen-fuzz-y: vertical noise value of the absolute input
+ device (in pixels)
+- touchscreen-inverted-x: X axis is inverted (boolean)
+- touchscreen-inverted-y: Y axis is inverted (boolean)
+
+Example: An example of touchscreen node
+
+ ts_adc_syscon: ts_adc_syscon@180a6000 {
+ compatible = "brcm,iproc-ts-adc-syscon","syscon";
+ reg = <0x180a6000 0xc30>;
+ };
+
+ touchscreen: touchscreen@180a6000 {
+ compatible = "brcm,iproc-touchscreen";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ts_syscon = <&ts_adc_syscon>;
+ clocks = <&adc_clk>;
+ clock-names = "tsc_clk";
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+ scanning_period = <5>;
+ debounce_timeout = <40>;
+ settling_timeout = <7>;
+ touch_timeout = <10>;
+ average_data = <5>;
+ fifo_threshold = <1>;
+ /* Touchscreen is rotated 180 degrees. */
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
new file mode 100644
index 000000000..da4c9d8b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
@@ -0,0 +1,43 @@
+* Rohm BU21013 Touch Screen
+
+Required properties:
+ - compatible : "rohm,bu21013_tp"
+ - reg : I2C device address
+ - reset-gpios : GPIO pin enabling (selecting) chip (CS)
+ - interrupt-parent : the phandle for the gpio controller
+ - interrupts : (gpio) interrupt to which the chip is connected
+
+Optional properties:
+ - touch-gpios : GPIO pin registering a touch event
+ - <supply_name>-supply : Phandle to a regulator supply
+ - touchscreen-size-x : General touchscreen binding, see [1].
+ - touchscreen-size-y : General touchscreen binding, see [1].
+ - touchscreen-inverted-x : General touchscreen binding, see [1].
+ - touchscreen-inverted-y : General touchscreen binding, see [1].
+ - touchscreen-swapped-x-y : General touchscreen binding, see [1].
+
+[1] All general touchscreen properties are described in
+ Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
+
+Deprecated properties:
+ - rohm,touch-max-x : Maximum outward permitted limit in the X axis
+ - rohm,touch-max-y : Maximum outward permitted limit in the Y axis
+ - rohm,flip-x : Flip touch coordinates on the X axis
+ - rohm,flip-y : Flip touch coordinates on the Y axis
+
+Example:
+
+ i2c@80110000 {
+ bu21013_tp@5c {
+ compatible = "rohm,bu21013_tp";
+ reg = <0x5c>;
+ interrupt-parent = <&gpio2>;
+ interrupts <&20 IRQ_TYPE_LEVEL_LOW>;
+ touch-gpio = <&gpio2 20 GPIO_ACTIVE_LOW>;
+ avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+ touchscreen-size-x = <384>;
+ touchscreen-size-y = <704>;
+ touchscreen-inverted-y;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt
new file mode 100644
index 000000000..8daa0e868
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt
@@ -0,0 +1,35 @@
+* Rohm BU21029 Touch Screen Controller
+
+Required properties:
+ - compatible : must be "rohm,bu21029"
+ - reg : i2c device address of the chip (0x40 or 0x41)
+ - interrupt-parent : the phandle for the gpio controller
+ - interrupts : (gpio) interrupt to which the chip is connected
+ - rohm,x-plate-ohms : x-plate resistance in Ohm
+
+Optional properties:
+ - reset-gpios : gpio pin to reset the chip (active low)
+ - touchscreen-size-x : horizontal resolution of touchscreen (in pixels)
+ - touchscreen-size-y : vertical resolution of touchscreen (in pixels)
+ - touchscreen-max-pressure: maximum pressure value
+ - vdd-supply : power supply for the controller
+
+Example:
+
+ &i2c1 {
+ /* ... */
+
+ bu21029: bu21029@40 {
+ compatible = "rohm,bu21029";
+ reg = <0x40>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+ rohm,x-plate-ohms = <600>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-max-pressure = <4095>;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
new file mode 100644
index 000000000..9df685bdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: chipone,icn8318
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wake-gpios:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - wake-gpios
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@40 {
+ compatible = "chipone,icn8318";
+ reg = <0x40>;
+ interrupt-parent = <&pio>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_wake_pin_p66>;
+ wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
new file mode 100644
index 000000000..ca304357c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -0,0 +1,34 @@
+* Toradex Colibri VF50 Touchscreen driver
+
+Required Properties:
+- compatible must be toradex,vf50-touchscreen
+- io-channels: adc channels being used by the Colibri VF50 module
+ IIO ADC for Y-, X-, Y+, X+ connections
+- xp-gpios: FET gate driver for input of X+
+- xm-gpios: FET gate driver for input of X-
+- yp-gpios: FET gate driver for input of Y+
+- ym-gpios: FET gate driver for input of Y-
+- interrupts: pen irq interrupt for touch detection, signal from X plate
+- pinctrl-names: "idle", "default"
+- pinctrl-0: pinctrl node for pen/touch detection, pinctrl must provide
+ pull-up resistor on X+, X-.
+- pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
+- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
+
+Example:
+
+ touchctrl: vf50_touchctrl {
+ compatible = "toradex,vf50-touchscreen";
+ io-channels = <&adc1 0>,<&adc0 0>,
+ <&adc0 1>,<&adc1 2>;
+ xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "idle","default";
+ pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+ pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
+ vf50-ts-min-pressure = <200>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
new file mode 100644
index 000000000..3225c8d1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8CTMA140 series touchscreen controller bindings
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: cypress,cy8ctma140
+
+ reg:
+ const: 0x20
+
+ clock-frequency:
+ description: I2C client clock frequency, defined for host
+ minimum: 100000
+ maximum: 400000
+
+ interrupts:
+ maxItems: 1
+
+ vcpin-supply:
+ description: Analog power supply regulator on VCPIN pin
+
+ vdd-supply:
+ description: Digital power supply regulator on VDD pin
+
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-swapped-x-y: true
+ touchscreen-max-pressure: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - touchscreen-size-x
+ - touchscreen-size-y
+ - touchscreen-max-pressure
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@20 {
+ compatible = "cypress,cy8ctma140";
+ reg = <0x20>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+ touchscreen-max-pressure = <255>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&ab8500_ldo_aux2_reg>;
+ vcpin-supply = <&ab8500_ldo_aux2_reg>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
new file mode 100644
index 000000000..762e56ee9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8CTMA340 series touchscreen controller bindings
+
+description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after
+ the marketing name Cypress TrueTouch Standard Product) touchscreens can
+ be connected to either I2C or SPI buses.
+
+maintainers:
+ - Javier Martinez Canillas <javier@dowhile0.org>
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ $nodename:
+ pattern: "^touchscreen(@.*)?$"
+
+ compatible:
+ oneOf:
+ - const: cypress,cy8ctma340
+ - const: cypress,cy8ctst341
+ - const: cypress,cyttsp-spi
+ description: Legacy compatible for SPI connected CY8CTMA340
+ deprecated: true
+ - const: cypress,cyttsp-i2c
+ description: Legacy compatible for I2C connected CY8CTMA340
+ deprecated: true
+
+ reg:
+ description: I2C address when used on the I2C bus, or the SPI chip
+ select index when used on the SPI bus
+
+ clock-frequency:
+ description: I2C client clock frequency, defined for host when using
+ the device on the I2C bus
+ minimum: 0
+ maximum: 400000
+
+ spi-max-frequency:
+ description: SPI clock frequency, defined for host, defined when using
+ the device on the SPI bus. The throughput is maximum 2 Mbps so the
+ typical value is 2000000, if higher rates are used the total throughput
+ needs to be restricted to 2 Mbps.
+ minimum: 0
+ maximum: 6000000
+
+ interrupts:
+ description: Interrupt to host
+ maxItems: 1
+
+ vcpin-supply:
+ description: Analog power supply regulator on VCPIN pin
+
+ vdd-supply:
+ description: Digital power supply regulator on VDD pin
+
+ reset-gpios:
+ description: Reset line for the touchscreen, should be tagged
+ as GPIO_ACTIVE_LOW
+
+ bootloader-key:
+ description: the 8-byte bootloader key that is required to switch
+ the chip from bootloader mode (default mode) to application mode
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 8
+ maxItems: 8
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+
+ active-distance:
+ description: the distance in pixels beyond which a touch must move
+ before movement is detected and reported by the device
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+
+ active-interval-ms:
+ description: the minimum period in ms between consecutive
+ scanning/processing cycles when the chip is in active mode
+ minimum: 0
+ maximum: 255
+
+ lowpower-interval-ms:
+ description: the minimum period in ms between consecutive
+ scanning/processing cycles when the chip is in low-power mode
+ minimum: 0
+ maximum: 2550
+
+ touch-timeout-ms:
+ description: minimum time in ms spent in the active power state while no
+ touches are detected before entering low-power mode
+ minimum: 0
+ maximum: 2550
+
+ use-handshake:
+ description: enable register-based handshake (boolean). This should only
+ be used if the chip is configured to use 'blocking communication with
+ timeout' (in this case the device generates an interrupt at the end of
+ every scanning/processing cycle)
+ $ref: /schemas/types.yaml#/definitions/flag
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - bootloader-key
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <1>;
+ cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+ touchscreen@0 {
+ compatible = "cypress,cy8ctma340";
+ reg = <0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&ldo_aux1_reg>;
+ vcpin-supply = <&ldo_aux2_reg>;
+ bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+ active-interval-ms = <0>;
+ touch-timeout-ms = <255>;
+ lowpower-interval-ms = <10>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
new file mode 100644
index 000000000..46bc8c028
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FocalTech EDT-FT5x06 Polytouch Bindings
+
+description: |
+ There are 5 variants of the chip for various touch panel sizes
+ FT5206GE1 2.8" .. 3.8"
+ FT5306DE4 4.3" .. 7"
+ FT5406EE8 7" .. 8.9"
+ FT5506EEG 7" .. 8.9"
+ FT5726NEI 5.7” .. 11.6"
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - evervision,ev-ft5726
+
+ then:
+ properties:
+ offset-x: true
+ offset-y: true
+
+properties:
+ compatible:
+ enum:
+ - edt,edt-ft5206
+ - edt,edt-ft5306
+ - edt,edt-ft5406
+ - edt,edt-ft5506
+ - evervision,ev-ft5726
+ - focaltech,ft6236
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ wake-gpios:
+ maxItems: 1
+
+ wakeup-source: true
+
+ vcc-supply: true
+ iovcc-supply: true
+
+ gain:
+ description: Allows setting the sensitivity in the range from 0 to 31.
+ Note that lower values indicate higher sensitivity.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+
+ offset:
+ description: Allows setting the edge compensation in the range from 0 to 31.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+
+ offset-x:
+ description: Same as offset, but applies only to the horizontal position.
+ Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 80
+
+ offset-y:
+ description: Same as offset, but applies only to the vertical position.
+ Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 80
+
+ report-rate-hz:
+ description: |
+ Allows setting the scan rate in Hertz.
+ M06 supports range from 30 to 140 Hz.
+ M12 supports range from 1 to 255 Hz.
+ minimum: 1
+ maximum: 255
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+ interrupt-controller: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edt-ft5x06@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
new file mode 100644
index 000000000..007adbc89
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/eeti,exc3000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EETI EXC3000 series touchscreen controller
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - eeti,exc3000
+ - eeti,exc80h60
+ - eeti,exc80h84
+ reg:
+ const: 0x2a
+ interrupts:
+ maxItems: 1
+ reset-gpios:
+ maxItems: 1
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+additionalProperties: false
+
+examples:
+ - |
+ #include "dt-bindings/interrupt-controller/irq.h"
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@2a {
+ compatible = "eeti,exc3000";
+ reg = <0x2a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti.txt b/Documentation/devicetree/bindings/input/touchscreen/eeti.txt
new file mode 100644
index 000000000..32b3712c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/eeti.txt
@@ -0,0 +1,30 @@
+Bindings for EETI touchscreen controller
+
+Required properties:
+- compatible: should be "eeti,exc3000-i2c"
+- reg: I2C address of the chip. Should be set to <0xa>
+- interrupts: interrupt to which the chip is connected
+
+Optional properties:
+- attn-gpios: A handle to a GPIO to check whether interrupt is still
+ latched. This is necessary for platforms that lack
+ support for level-triggered IRQs.
+
+The following optional properties described in touchscreen.txt are
+also supported:
+
+- touchscreen-inverted-x
+- touchscreen-inverted-y
+- touchscreen-swapped-x-y
+
+Example:
+
+i2c-master {
+ touchscreen@a {
+ compatible = "eeti,exc3000-i2c";
+ reg = <0xa>;
+ interrupt-parent = <&gpio>;
+ interrupts = <123 IRQ_TYPE_EDGE_RISING>;
+ attn-gpios = <&gpio 123 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644
index 000000000..92fb2620f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -0,0 +1,18 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+ and also used as irq pin
+
+Example:
+
+ touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 2>;
+ wakeup-gpios = <&gpio1 9 0>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
new file mode 100644
index 000000000..c9f2c9f57
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
@@ -0,0 +1,25 @@
+* Elan eKTF2127 I2C touchscreen controller
+
+Required properties:
+ - compatible : "elan,ektf2127" or "elan,ektf2132"
+ - reg : I2C slave address of the chip (0x40)
+ - interrupts : interrupt specification for the ektf2127 interrupt
+ - power-gpios : GPIO specification for the pin connected to the
+ ektf2127's wake input. This needs to be driven high
+ to take ektf2127 out of its low power state
+
+For additional optional properties see: touchscreen.txt
+
+Example:
+
+i2c@00000000 {
+ ektf2127: touchscreen@15 {
+ compatible = "elan,ektf2127";
+ reg = <0x15>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
+ power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
new file mode 100644
index 000000000..f9053e5e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Elantech I2C Touchscreen
+
+maintainers:
+ - David Heidelberg <david@ixit.cz>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - elan,ektf3624
+ - elan,ekth3500
+ - items:
+ - const: elan,ekth3915
+ - const: elan,ekth3500
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source:
+ type: boolean
+ description: touchscreen can be used as a wakeup source.
+
+ reset-gpios:
+ maxItems: 1
+ description: reset gpio the chip is connected to.
+
+ vcc33-supply:
+ description: a phandle for the regulator supplying 3.3V power.
+
+ vccio-supply:
+ description: a phandle for the regulator supplying IO power.
+
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+
+ interrupt-parent = <&gpio4>;
+ interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
new file mode 100644
index 000000000..99d6f9d25
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
@@ -0,0 +1,34 @@
+Freescale mx25 TS conversion queue module
+
+mx25 touchscreen conversion queue module which controls the ADC unit of the
+mx25 for attached touchscreens.
+
+Required properties:
+ - compatible: Should be "fsl,imx25-tcq".
+ - reg: Memory range of the device.
+ - interrupts: Should be the interrupt number associated with this module within
+ the tscadc unit (<0>).
+ - fsl,wires: Should be '<4>' or '<5>'
+
+Optional properties:
+ - fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
+ - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
+ between 1 and 4096. It is the ratio between the internal reference voltage
+ and the measured voltage after the plate was precharged. Resistance between
+ plates and therefore the voltage decreases with pressure so that a smaller
+ value is equivalent to a higher pressure.
+ - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
+ the actual touch detection to wait for an even charge distribution in the
+ plate.
+
+This device includes two conversion queues which can be added as subnodes.
+The first queue is for the touchscreen, the second for general purpose ADC.
+
+Example:
+ tsc: tcq@50030400 {
+ compatible = "fsl,imx25-tcq";
+ reg = <0x50030400 0x60>;
+ interrupt-parent = <&tscadc>;
+ interrupts = <0>;
+ fsl,wires = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
new file mode 100644
index 000000000..19ac9da42
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT9xx series touchscreen controller Bindings
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - goodix,gt1151
+ - goodix,gt1158
+ - goodix,gt5663
+ - goodix,gt5688
+ - goodix,gt911
+ - goodix,gt9110
+ - goodix,gt912
+ - goodix,gt9147
+ - goodix,gt917s
+ - goodix,gt927
+ - goodix,gt9271
+ - goodix,gt928
+ - goodix,gt9286
+ - goodix,gt967
+
+ reg:
+ enum: [ 0x5d, 0x14 ]
+
+ interrupts:
+ maxItems: 1
+
+ irq-gpios:
+ description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
+ as output to reset the device.
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ AVDD28-supply:
+ description: Analog power supply regulator on AVDD28 pin
+
+ VDDIO-supply:
+ description: GPIO power supply regulator on VDDIO pin
+
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gt928@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ interrupt-parent = <&gpio>;
+ interrupts = <0 0>;
+ irq-gpios = <&gpio1 0 0>;
+ reset-gpios = <&gpio1 1 0>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
new file mode 100644
index 000000000..a47c36190
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
@@ -0,0 +1,41 @@
+* HiDeep Finger and Stylus touchscreen controller
+
+Required properties:
+- compatible : must be "hideep,hideep-ts"
+- reg : I2C slave address, (e.g. 0x6C).
+- interrupts : Interrupt to which the chip is connected.
+
+Optional properties:
+- vdd-supply : It is the controller supply for controlling
+ main voltage(3.3V) through the regulator.
+- vid-supply : It is the controller supply for controlling
+ IO voltage(1.8V) through the regulator.
+- reset-gpios : Define for reset gpio pin.
+ It is to use for reset IC.
+- touchscreen-size-x : X axis size of touchscreen
+- touchscreen-size-y : Y axis size of touchscreen
+- linux,keycodes : Specifies an array of numeric keycode values to
+ be used for reporting button presses. The array can
+ contain up to 3 entries.
+
+Example:
+
+#include "dt-bindings/input/input.h"
+
+i2c@00000000 {
+
+ /* ... */
+
+ touchscreen@6c {
+ compatible = "hideep,hideep-ts";
+ reg = <0x6c>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&ldo15_reg>;
+ vid-supply = <&ldo18_reg>;
+ reset-gpios = <&gpx1 5 0>;
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ linux,keycodes = <KEY_HOME>, <KEY_MENU>, <KEY_BACK>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
new file mode 100644
index 000000000..942562f1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hycon HY46XX series touchscreen controller bindings
+
+description: |
+ There are 6 variants of the chip for various touch panel sizes and cover lens material
+ Glass: 0.3mm--4.0mm
+ PET/PMMA: 0.2mm--2.0mm
+ HY4613(B)-N048 < 6"
+ HY4614(B)-N068 7" .. 10.1"
+ HY4621-NS32 < 5"
+ HY4623-NS48 5.1" .. 7"
+ Glass: 0.3mm--8.0mm
+ PET/PMMA: 0.2mm--4.0mm
+ HY4633(B)-N048 < 6"
+ HY4635(B)-N048 < 7" .. 10.1"
+
+maintainers:
+ - Giulio Benetti <giulio.benetti@benettiengineering.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - hycon,hy4613
+ - hycon,hy4614
+ - hycon,hy4621
+ - hycon,hy4623
+ - hycon,hy4633
+ - hycon,hy4635
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ vcc-supply: true
+
+ hycon,threshold:
+ description: Allows setting the sensitivity in the range from 0 to 255.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+
+ hycon,glove-enable:
+ type: boolean
+ description: Allows enabling glove setting.
+
+ hycon,report-speed-hz:
+ description: Allows setting the report speed in Hertz.
+ minimum: 1
+ maximum: 255
+
+ hycon,noise-filter-enable:
+ type: boolean
+ description: Allows enabling power noise filter.
+
+ hycon,filter-data:
+ description: Allows setting how many samples throw before reporting touch
+ in the range from 0 to 5.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+
+ hycon,gain:
+ description: Allows setting the sensitivity distance in the range from 0 to 5.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+
+ hycon,edge-offset:
+ description: Allows setting the edge compensation in the range from 0 to 16.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 16
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+ interrupt-controller: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@1c {
+ compatible = "hycon,hy4633";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
new file mode 100644
index 000000000..9f7328999
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek I2C Touchscreen Controller
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ilitek,ili210x
+ - ilitek,ili2117
+ - ilitek,ili2120
+ - ilitek,ili2130
+ - ilitek,ili2131
+ - ilitek,ili2132
+ - ilitek,ili2316
+ - ilitek,ili2322
+ - ilitek,ili2323
+ - ilitek,ili2326
+ - ilitek,ili251x
+ - ilitek,ili2520
+ - ilitek,ili2521
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ wakeup-source:
+ type: boolean
+ description: touchscreen can be used as a wakeup source.
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@41 {
+ compatible = "ilitek,ili2520";
+ reg = <0x41>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ touchscreen-inverted-y;
+ wakeup-source;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
new file mode 100644
index 000000000..e3a2b871e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagis IST30XXC family touchscreen controller bindings
+
+maintainers:
+ - Markuss Broks <markuss.broks@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ $nodename:
+ pattern: "^touchscreen@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - imagis,ist3038c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Power supply regulator for the chip
+
+ vddio-supply:
+ description: Power supply regulator for the I2C bus
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@50 {
+ compatible = "imagis,ist3038c";
+ reg = <0x50>;
+ interrupt-parent = <&gpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&ldo1_reg>;
+ vddio-supply = <&ldo2_reg>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+ touchscreen-fuzz-x = <10>;
+ touchscreen-fuzz-y = <10>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
new file mode 100644
index 000000000..164915004
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
@@ -0,0 +1,38 @@
+* Freescale i.MX6UL Touch Controller
+
+Required properties:
+- compatible: must be "fsl,imx6ul-tsc".
+- reg: this touch controller address and the ADC2 address.
+- interrupts: the interrupt of this touch controller and ADC2.
+- clocks: the root clock of touch controller and ADC2.
+- clock-names; must be "tsc" and "adc".
+- xnur-gpio: the X- gpio this controller connect to.
+ This xnur-gpio returns to low once the finger leave the touch screen (The
+ last touch event the touch controller capture).
+
+Optional properties:
+- measure-delay-time: the value of measure delay time.
+ Before X-axis or Y-axis measurement, the screen need some time before
+ even potential distribution ready.
+ This value depends on the touch screen.
+- pre-charge-time: the touch screen need some time to precharge.
+ This value depends on the touch screen.
+- touchscreen-average-samples: Number of data samples which are averaged for
+ each read. Valid values are 1, 4, 8, 16 and 32.
+
+Example:
+ tsc: tsc@2040000 {
+ compatible = "fsl,imx6ul-tsc";
+ reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_IPG>,
+ <&clks IMX6UL_CLK_ADC2>;
+ clock-names = "tsc", "adc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ measure-delay-time = <0xfff>;
+ pre-charge-time = <0xffff>;
+ touchscreen-average-samples = <32>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt
new file mode 100644
index 000000000..41cbf4b7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt
@@ -0,0 +1,16 @@
+* NXP LPC32xx SoC Touchscreen Controller (TSC)
+
+Required properties:
+- compatible: must be "nxp,lpc3220-tsc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The TSC/ADC interrupt
+
+Example:
+
+ tsc@40048000 {
+ compatible = "nxp,lpc3220-tsc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&mic>;
+ interrupts = <39 0>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
new file mode 100644
index 000000000..05e982c34
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
@@ -0,0 +1,17 @@
+* MAXI MAX11801 Resistive touch screen controller with i2c interface
+
+Required properties:
+- compatible: must be "maxim,max11801"
+- reg: i2c slave address
+- interrupts: touch controller interrupt
+
+Example:
+
+&i2c1 {
+ max11801: touchscreen@48 {
+ compatible = "maxim,max11801";
+ reg = <0x48>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
new file mode 100644
index 000000000..62366886f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melfas MMS114 family touchscreen controller bindings
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ $nodename:
+ pattern: "^touchscreen(@.*)?$"
+
+ compatible:
+ items:
+ - enum:
+ - melfas,mms114
+ - melfas,mms134s
+ - melfas,mms136
+ - melfas,mms152
+ - melfas,mms345l
+
+ reg:
+ description: I2C address
+
+ clock-frequency:
+ description: I2C client clock frequency, defined for host
+ minimum: 100000
+ maximum: 400000
+
+ interrupts:
+ maxItems: 1
+
+ avdd-supply:
+ description: Analog power supply regulator on AVDD pin
+
+ vdd-supply:
+ description: Digital power supply regulator on VDD pin
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-fuzz-pressure: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+ touchscreen-max-pressure: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@48 {
+ compatible = "melfas,mms114";
+ reg = <0x48>;
+ interrupt-parent = <&gpio>;
+ interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+ avdd-supply = <&ldo1_reg>;
+ vdd-supply = <&ldo2_reg>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+ touchscreen-fuzz-x = <10>;
+ touchscreen-fuzz-y = <10>;
+ touchscreen-fuzz-pressure = <10>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
new file mode 100644
index 000000000..b2ab5498e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
@@ -0,0 +1,20 @@
+* MELFAS MIP4 Touchscreen
+
+Required properties:
+- compatible: must be "melfas,mip4_ts"
+- reg: I2C slave address of the chip (0x48 or 0x34)
+- interrupts: interrupt to which the chip is connected
+
+Optional properties:
+- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip
+
+Example:
+ i2c@00000000 {
+ touchscreen: melfas_mip4@48 {
+ compatible = "melfas,mip4_ts";
+ reg = <0x48>;
+ interrupt-parent = <&gpio>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
new file mode 100644
index 000000000..3a42c23fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar msg2638 touchscreen controller Bindings
+
+maintainers:
+ - Vincent Knecht <vincent.knecht@mailoo.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: mstar,msg2638
+
+ reg:
+ const: 0x26
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ vdd-supply:
+ description: Power supply regulator for the chip
+
+ vddio-supply:
+ description: Power supply regulator for the I2C bus
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@26 {
+ compatible = "mstar,msg2638";
+ reg = <0x26>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_reset_default>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+ touchscreen-size-x = <2048>;
+ touchscreen-size-y = <2048>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
new file mode 100644
index 000000000..f9998edbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/pixcir,pixcir_ts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pixcir Touchscreen Controller Device Tree Bindings
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - pixcir,pixcir_ts
+ - pixcir,pixcir_tangoc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ attb-gpio:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ enable-gpios:
+ maxItems: 1
+
+ wake-gpios:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - attb-gpio
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@5c {
+ compatible = "pixcir,pixcir_ts";
+ reg = <0x5c>;
+ interrupts = <2 0>;
+ attb-gpio = <&gpf 2 0 2>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <600>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt
new file mode 100644
index 000000000..2a1af240c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt
@@ -0,0 +1,26 @@
+Raspberry Pi firmware based 7" touchscreen
+=====================================
+
+Required properties:
+ - compatible: "raspberrypi,firmware-ts"
+
+Optional properties:
+ - firmware: Reference to RPi's firmware device node
+ - touchscreen-size-x: See touchscreen.txt
+ - touchscreen-size-y: See touchscreen.txt
+ - touchscreen-inverted-x: See touchscreen.txt
+ - touchscreen-inverted-y: See touchscreen.txt
+ - touchscreen-swapped-x-y: See touchscreen.txt
+
+Example:
+
+firmware: firmware-rpi {
+ compatible = "raspberrypi,bcm2835-firmware";
+ mboxes = <&mailbox>;
+
+ ts: touchscreen {
+ compatible = "raspberrypi,firmware-ts";
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
new file mode 100644
index 000000000..7fc22a403
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic resistive touchscreen ADC
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+ Generic ADC based resistive touchscreen controller
+ The device must be connected to an ADC device that provides channels for
+ position measurement and optional pressure.
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: resistive-adc-touch
+
+ io-channels:
+ minItems: 2
+ items:
+ - description: x
+ - description: y
+ - description: pressure (optional)
+ - description: z1 (optional)
+ - description: z2 (optional)
+
+ io-channel-names:
+ oneOf:
+ - items:
+ - enum: [x, y]
+ - enum: [x, y]
+ - items:
+ - enum: [x, y, pressure]
+ - enum: [x, y, pressure]
+ - enum: [x, y, pressure]
+ - items:
+ - enum: [x, y, z1, z2]
+ - enum: [x, y, z1, z2]
+ - enum: [x, y, z1, z2]
+ - enum: [x, y, z1, z2]
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+ touchscreen-min-pressure: true
+ touchscreen-x-plate-ohms: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+
+examples:
+ - |
+ touchscreen {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc 24>, <&adc 25>;
+ io-channel-names = "y", "x";
+ };
+ - |
+ touchscreen {
+ compatible = "resistive-adc-touch";
+ touchscreen-min-pressure = <50000>;
+ io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
+ io-channel-names = "y", "pressure", "x";
+ };
+ - |
+ touchscreen {
+ compatible = "resistive-adc-touch";
+ touchscreen-min-pressure = <50000>;
+ io-channels = <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+ io-channel-names = "x", "z1", "z2", "y";
+ touchscreen-x-plate-ohms = <800>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
new file mode 100644
index 000000000..6805d10d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
@@ -0,0 +1,32 @@
+* Samsung S6SY761 touchscreen controller
+
+Required properties:
+- compatible : must be "samsung,s6sy761"
+- reg : I2C slave address, (e.g. 0x48)
+- interrupts : interrupt specification
+- avdd-supply : analogic power supply
+- vdd-supply : power supply
+
+Optional properties:
+- touchscreen-size-x : see touchscreen.txt. This property is embedded in the
+ device. If defined it forces a different x resolution.
+- touchscreen-size-y : see touchscreen.txt. This property is embedded in the
+ device. If defined it forces a different y resolution.
+
+Example:
+
+i2c@00000000 {
+
+ /* ... */
+
+ touchscreen@48 {
+ compatible = "samsung,s6sy761";
+ reg = <0x48>;
+ interrupt-parent = <&gpa1>;
+ interrupts = <1 IRQ_TYPE_NONE>;
+ avdd-supply = <&ldo30_reg>;
+ vdd-supply = <&ldo31_reg>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
new file mode 100644
index 000000000..eec6f7f6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/silead,gsl1680.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silead GSL1680 Touchscreen Controller Device Tree Bindings
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - silead,gsl1680
+ - silead,gsl1688
+ - silead,gsl3670
+ - silead,gsl3675
+ - silead,gsl3692
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-gpios:
+ maxItems: 1
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: >
+ File basename for board specific firmware
+
+ silead,max-fingers:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 5
+ description: >
+ Maximum number of fingers the touchscreen can detect
+
+ silead,home-button:
+ type: boolean
+ description: >
+ Does the device have a capacitive home-button build into the
+ touchscreen?
+
+ avdd-supply:
+ description: >
+ Regulator phandle for controller AVDD
+
+ vddio-supply:
+ description: >
+ Regulator phandle for controller VDDIO
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-gpios
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@40 {
+ compatible = "silead,gsl1680";
+ reg = <0x40>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ silead,max-fingers = <5>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
new file mode 100644
index 000000000..8f5322e01
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
@@ -0,0 +1,31 @@
+* SiS I2C Multiple Touch Controller
+
+Required properties:
+- compatible: must be "sis,9200-ts"
+- reg: i2c slave address
+- interrupts: touch controller interrupt (see interrupt
+ binding [0])
+
+Optional properties:
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the
+ device (see pinctrl binding [1]).
+- attn-gpios: the gpio pin used as attention line
+- reset-gpios: the gpio pin used to reset the controller
+- wakeup-source: touchscreen can be used as a wakeup source
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+
+ sis9255@5c {
+ compatible = "sis,9200-ts";
+ reg = <0x5c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sis>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+ irq-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
new file mode 100644
index 000000000..1d8ca19fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/sitronix,st1232.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix st1232 or st1633 touchscreen controller
+
+maintainers:
+ - Bastian Hecht <hechtb@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - sitronix,st1232
+ - sitronix,st1633
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpios:
+ description: A phandle to the reset GPIO
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@55 {
+ compatible = "sitronix,st1232";
+ reg = <0x55>;
+ interrupts = <2 0>;
+ gpios = <&gpio1 166 0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
new file mode 100644
index 000000000..0a5d0cb4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
@@ -0,0 +1,41 @@
+* ST-Microelectronics FingerTip touchscreen controller
+
+The ST-Microelectronics FingerTip device provides a basic touchscreen
+functionality. Along with it the user can enable the touchkey which can work as
+a basic HOME and BACK key for phones.
+
+The driver supports also hovering as an absolute single touch event with x, y, z
+coordinates.
+
+Required properties:
+- compatible : must be "st,stmfts"
+- reg : I2C slave address, (e.g. 0x49)
+- interrupts : interrupt specification
+- avdd-supply : analogic power supply
+- vdd-supply : power supply
+- touchscreen-size-x : see touchscreen.txt
+- touchscreen-size-y : see touchscreen.txt
+
+Optional properties:
+- touch-key-connected : specifies whether the touchkey feature is connected
+- ledvdd-supply : power supply to the touch key leds
+
+Example:
+
+i2c@00000000 {
+
+ /* ... */
+
+ touchscreen@49 {
+ compatible = "st,stmfts";
+ reg = <0x49>;
+ interrupt-parent = <&gpa1>;
+ interrupts = <1 IRQ_TYPE_NONE>;
+ touchscreen-size-x = <1599>;
+ touchscreen-size-y = <2559>;
+ touch-key-connected;
+ avdd-supply = <&ldo30_reg>;
+ vdd-supply = <&ldo31_reg>;
+ ledvdd-supply = <&ldo33_reg>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
new file mode 100644
index 000000000..238b51555
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -0,0 +1,108 @@
+STMPE Touchscreen
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-ts"
+
+Optional properties:
+- st,ave-ctrl : Sample average control
+ 0 -> 1 sample
+ 1 -> 2 samples
+ 2 -> 4 samples
+ 3 -> 8 samples
+- st,touch-det-delay : Touch detect interrupt delay (recommended is 3)
+ 0 -> 10 us
+ 1 -> 50 us
+ 2 -> 100 us
+ 3 -> 500 us
+ 4 -> 1 ms
+ 5 -> 5 ms
+ 6 -> 10 ms
+ 7 -> 50 ms
+- st,settling : Panel driver settling time (recommended is 2)
+ 0 -> 10 us
+ 1 -> 100 us
+ 2 -> 500 us
+ 3 -> 1 ms
+ 4 -> 5 ms
+ 5 -> 10 ms
+ 6 -> 50 ms
+ 7 -> 100 ms
+- st,fraction-z : Length of the fractional part in z (recommended is 7)
+ (fraction-z ([0..7]) = Count of the fractional part)
+- st,i-drive : current limit value of the touchscreen drivers
+ 0 -> 20 mA (typical 35mA max)
+ 1 -> 50 mA (typical 80 mA max)
+
+Optional properties common with MFD (deprecated):
+ - st,sample-time : ADC conversion time in number of clock.
+ 0 -> 36 clocks
+ 1 -> 44 clocks
+ 2 -> 56 clocks
+ 3 -> 64 clocks
+ 4 -> 80 clocks (recommended)
+ 5 -> 96 clocks
+ 6 -> 124 clocks
+ - st,mod-12b : ADC Bit mode
+ 0 -> 10bit ADC
+ 1 -> 12bit ADC
+ - st,ref-sel : ADC reference source
+ 0 -> internal
+ 1 -> external
+ - st,adc-freq : ADC Clock speed
+ 0 -> 1.625 MHz
+ 1 -> 3.25 MHz
+ 2 || 3 -> 6.5 MHz
+
+Node should be child node of stmpe node to which it belongs.
+
+Note that common ADC settings of stmpe_touchscreen (child) will take precedence
+over the settings done in MFD.
+
+Example:
+
+stmpe811@41 {
+ compatible = "st,stmpe811";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch_int>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio4>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+ /* Common ADC settings */
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ reg = <0>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ };
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x0F>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
new file mode 100644
index 000000000..0ebe6dd04
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -0,0 +1,23 @@
+* Semtech SX8654 I2C Touchscreen Controller
+
+Required properties:
+- compatible: must be one of the following, depending on the model:
+ "semtech,sx8650"
+ "semtech,sx8654"
+ "semtech,sx8655"
+ "semtech,sx8656"
+- reg: i2c slave address
+- interrupts: touch controller interrupt
+
+Optional properties:
+ - reset-gpios: GPIO specification for the NRST input
+
+Example:
+
+ sx8654@48 {
+ compatible = "semtech,sx8654";
+ reg = <0x48>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
new file mode 100644
index 000000000..e44cc65ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,am3359-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+ compatible:
+ const: ti,am3359-tsc
+
+ ti,wires:
+ description: Wires refer to application modes i.e. 4/5/8 wire touchscreen
+ support on the platform.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [4, 5, 8]
+
+ ti,x-plate-resistance:
+ description: X plate resistance
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ti,coordinate-readouts:
+ description: The sequencer supports a total of 16 programmable steps. Each
+ step is used to read a single coordinate. A single readout is enough but
+ multiple reads can increase the quality. A value of 5 means, 5 reads for
+ X, 5 for Y and 2 for Z (always). This utilises 12 of the 16 software steps
+ available. The remaining 4 can be used by the ADC.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 6
+
+ ti,wire-config:
+ description: Different boards could have a different order for connecting
+ wires on touchscreen. We need to provide an 8-bit number where the
+ first four bits represent the analog lines and the next 4 bits represent
+ positive/negative terminal on that input line. Notations to represent the
+ input lines and terminals respectively are as follows, AIN0 = 0, AIN1 = 1
+ and so on until AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 4
+ maxItems: 8
+
+ ti,charge-delay:
+ description: Length of touch screen charge delay step in terms of ADC clock
+ cycles. Charge delay value should be large in order to avoid false pen-up
+ events. This value effects the overall sampling speed, hence need to be
+ kept as low as possible, while avoiding false pen-up event. Start from a
+ lower value, say 0x400, and increase value until false pen-up events are
+ avoided. The pen-up detection happens immediately after the charge step,
+ so this does in fact function as a hardware knob for adjusting the amount
+ of "settling time".
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - ti,wires
+ - ti,x-plate-resistance
+ - ti,coordinate-readouts
+ - ti,wire-config
+
+additionalProperties: false
+
+examples:
+ - |
+ tsc {
+ compatible = "ti,am3359-tsc";
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordinate-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ ti,charge-delay = <0x400>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
new file mode 100644
index 000000000..938aab016
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings
+
+maintainers:
+ - Marek Vasut <marex@denx.de>
+ - Michael Welling <mwelling@ieee.org>
+
+properties:
+ $nodename:
+ pattern: "^touchscreen(@.*)?$"
+
+ compatible:
+ enum:
+ - ti,tsc2004
+ - ti,tsc2005
+
+ reg:
+ maxItems: 1
+ description: |
+ I2C address when used on the I2C bus, or the SPI chip select index
+ when used on the SPI bus
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO specifier for the controller reset line
+
+ spi-max-frequency:
+ description: TSC2005 SPI bus clock frequency.
+ maximum: 25000000
+
+ ti,x-plate-ohms:
+ description: resistance of the touchscreen's X plates in ohm (defaults to 280)
+
+ ti,esd-recovery-timeout-ms:
+ description: |
+ if the touchscreen does not respond after the configured time
+ (in milli seconds), the driver will reset it. This is disabled
+ by default.
+
+ vio-supply:
+ description: Regulator specifier
+
+ touchscreen-fuzz-pressure: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-max-pressure: true
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+
+allOf:
+ - $ref: touchscreen.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,tsc2004
+ then:
+ properties:
+ spi-max-frequency: false
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ vio-supply = <&vio>;
+
+ reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@0 {
+ compatible = "ti,tsc2005";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+
+ vio-supply = <&vio>;
+
+ reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+ interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
new file mode 100644
index 000000000..e1adb902d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@@ -0,0 +1 @@
+See touchscreen.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
new file mode 100644
index 000000000..4b5b212c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common touchscreen Bindings
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+properties:
+ touchscreen-min-x:
+ description: minimum x coordinate reported
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ touchscreen-min-y:
+ description: minimum y coordinate reported
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ touchscreen-size-x:
+ description: horizontal resolution of touchscreen (maximum x coordinate reported + 1)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-size-y:
+ description: vertical resolution of touchscreen (maximum y coordinate reported + 1)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-max-pressure:
+ description: maximum reported pressure (arbitrary range dependent on the controller)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-min-pressure:
+ description: minimum pressure on the touchscreen to be achieved in order
+ for the touchscreen driver to report a touch event.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-fuzz-x:
+ description: horizontal noise value of the absolute input device (in pixels)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-fuzz-y:
+ description: vertical noise value of the absolute input device (in pixels)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-fuzz-pressure:
+ description: pressure noise value of the absolute input device (arbitrary
+ range dependent on the controller)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-average-samples:
+ description: Number of data samples which are averaged for each read (valid
+ values dependent on the controller)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-inverted-x:
+ description: X axis is inverted
+ type: boolean
+
+ touchscreen-inverted-y:
+ description: Y axis is inverted
+ type: boolean
+
+ touchscreen-swapped-x-y:
+ description: X and Y axis are swapped
+ Swapping is done after inverting the axis
+ type: boolean
+
+ touchscreen-x-mm:
+ description: horizontal length in mm of the touchscreen
+
+ touchscreen-y-mm:
+ description: vertical length in mm of the touchscreen
+
+ touchscreen-x-plate-ohms:
+ description: Resistance of the X-plate in Ohms
+
+ touchscreen-y-plate-ohms:
+ description: Resistance of the Y-plate in Ohms
+
+dependencies:
+ touchscreen-size-x: [ touchscreen-size-y ]
+ touchscreen-size-y: [ touchscreen-size-x ]
+ touchscreen-x-mm: [ touchscreen-y-mm ]
+ touchscreen-y-mm: [ touchscreen-x-mm ]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt
new file mode 100644
index 000000000..4c1c092c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt
@@ -0,0 +1,11 @@
+* TS-4800 Touchscreen bindings
+
+Required properties:
+- compatible: must be "technologic,ts4800-ts"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- syscon: phandle / integers array that points to the syscon node which
+ describes the FPGA's syscon registers.
+ - phandle to FPGA's syscon
+ - offset to the touchscreen register
+ - offset to the touchscreen enable bit
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
new file mode 100644
index 000000000..ed00f61b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
@@ -0,0 +1,39 @@
+* Texas Instruments tsc2007 touchscreen controller
+
+Required properties:
+- compatible: must be "ti,tsc2007".
+- reg: I2C address of the chip.
+- ti,x-plate-ohms: X-plate resistance in ohms.
+
+Optional properties:
+- gpios: the interrupt gpio the chip is connected to (trough the penirq pin).
+ The penirq pin goes to low when the panel is touched.
+ (see GPIO binding[1] for more details).
+- interrupts: (gpio) interrupt to which the chip is connected
+ (see interrupt binding[0]).
+- ti,max-rt: maximum pressure.
+- ti,fuzzx: specifies the absolute input fuzz x value.
+ If set, it will permit noise in the data up to +- the value given to the fuzz
+ parameter, that is used to filter noise from the event stream.
+- ti,fuzzy: specifies the absolute input fuzz y value.
+- ti,fuzzz: specifies the absolute input fuzz z value.
+- ti,poll-period: how much time to wait (in milliseconds) before reading again the
+ values from the tsc2007.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+ &i2c1 {
+ /* ... */
+ tsc2007@49 {
+ compatible = "ti,tsc2007";
+ reg = <0x49>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <0x0 0x8>;
+ gpios = <&gpio4 0 0>;
+ ti,x-plate-ohms = <180>;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
new file mode 100644
index 000000000..27d55a506
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
@@ -0,0 +1,30 @@
+Zeitec ZET6223 I2C touchscreen controller
+
+Required properties:
+- compatible : "zeitec,zet6223"
+- reg : I2C slave address of the chip (0x76)
+- interrupts : interrupt specification for the zet6223 interrupt
+
+Optional properties:
+
+- vio-supply : Specification for VIO supply (1.8V or 3.3V,
+ depending on system interface needs).
+- vcc-supply : Specification for 3.3V VCC supply.
+- touchscreen-size-x : See touchscreen.txt
+- touchscreen-size-y : See touchscreen.txt
+- touchscreen-inverted-x : See touchscreen.txt
+- touchscreen-inverted-y : See touchscreen.txt
+- touchscreen-swapped-x-y : See touchscreen.txt
+
+Example:
+
+i2c@00000000 {
+
+ zet6223: touchscreen@76 {
+ compatible = "zeitec,zet6223";
+ reg = <0x76>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
+ };
+
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
new file mode 100644
index 000000000..e3c27c4fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
@@ -0,0 +1,34 @@
+* Neonode infrared touchscreen controller
+
+Required properties:
+- compatible: must be "neonode,zforce"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- reset-gpios: reset gpio the chip is connected to
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Optional properties:
+- irq-gpios : interrupt gpio the chip is connected to
+- vdd-supply: Regulator controlling the controller supply
+
+Example:
+
+ i2c@00000000 {
+ /* ... */
+
+ zforce_ts@50 {
+ compatible = "neonode,zforce";
+ reg = <0x50>;
+ interrupts = <2 0>;
+ vdd-supply = <&reg_zforce_vdd>;
+
+ reset-gpios = <&gpio5 9 0>; /* RST */
+ irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
+
+ x-size = <800>;
+ y-size = <600>;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
new file mode 100644
index 000000000..b4e5ba7c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zinitix BT4xx and BT5xx series touchscreen controller bindings
+
+description: The Zinitix BT4xx and BT5xx series of touchscreen controllers
+ are Korea-produced touchscreens with embedded microcontrollers. The
+ BT4xx series was produced 2010-2013 and the BT5xx series 2013-2014.
+
+maintainers:
+ - Michael Srba <Michael.Srba@seznam.cz>
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ $nodename:
+ pattern: "^touchscreen(@.*)?$"
+
+ compatible:
+ enum:
+ - zinitix,bt402
+ - zinitix,bt403
+ - zinitix,bt404
+ - zinitix,bt412
+ - zinitix,bt413
+ - zinitix,bt431
+ - zinitix,bt432
+ - zinitix,bt531
+ - zinitix,bt532
+ - zinitix,bt538
+ - zinitix,bt541
+ - zinitix,bt548
+ - zinitix,bt554
+ - zinitix,at100
+
+ reg:
+ description: I2C address on the I2C bus
+
+ clock-frequency:
+ description: I2C client clock frequency, defined for host when using
+ the device on the I2C bus
+ minimum: 0
+ maximum: 400000
+
+ interrupts:
+ description: Interrupt to host
+ maxItems: 1
+
+ vcca-supply:
+ description: Analog power supply regulator on the VCCA pin
+
+ vdd-supply:
+ description: Digital power supply regulator on the VDD pin.
+ In older device trees this can be the accidental name for the analog
+ supply on the VCCA pin, and in that case the deprecated vddo-supply is
+ used for the digital power supply.
+
+ vddo-supply:
+ description: Deprecated name for the digital power supply, use vdd-supply
+ as this reflects the real name of the pin. If this supply is present,
+ the vdd-supply represents VCCA instead of VDD. Implementers should first
+ check for this property, and if it is present assume that the vdd-supply
+ represents the analog supply.
+ deprecated: true
+
+ reset-gpios:
+ description: Reset line for the touchscreen, should be tagged
+ as GPIO_ACTIVE_LOW
+
+ zinitix,mode:
+ description: Mode of reporting touch points. Some modes may not work
+ with a particular ts firmware for unknown reasons. Available modes are
+ 1 and 2. Mode 2 is the default and preferred.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@20 {
+ compatible = "zinitix,bt541";
+ reg = <0x20>;
+ interrupt-parent = <&gpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ vcca-supply = <&reg_vcca_tsp>;
+ vdd-supply = <&reg_vdd_tsp>;
+ touchscreen-size-x = <540>;
+ touchscreen-size-y = <960>;
+ zinitix,mode = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
new file mode 100644
index 000000000..8682ab6d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
@@ -0,0 +1,30 @@
+Texas Instruments TPS65217 and TPS65218 power button
+
+This module is part of the TPS65217/TPS65218. For more details about the whole
+TPS65217 chip see Documentation/devicetree/bindings/regulator/tps65217.txt.
+
+This driver provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"
+
+Required properties:
+- interrupts: should be one of the following
+ - <2>: For controllers compatible with tps65217
+ - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
+
+Examples:
+
+&tps {
+ tps65217-pwrbutton {
+ compatible = "ti,tps65217-pwrbutton";
+ interrupts = <2>;
+ };
+};
+
+&tps {
+ power-button {
+ compatible = "ti,tps65218-pwrbutton";
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/twl4030-keypad.txt b/Documentation/devicetree/bindings/input/twl4030-keypad.txt
new file mode 100644
index 000000000..e4be2f76a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl4030-keypad.txt
@@ -0,0 +1,27 @@
+* TWL4030's Keypad Controller device tree bindings
+
+TWL4030's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+ * keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "ti,twl4030-keypad": For controllers compatible with twl4030 keypad
+ controller.
+- interrupt: should be one of the following
+ - <1>: For controllers compatible with twl4030 keypad controller.
+
+Example:
+ twl_keypad: keypad {
+ compatible = "ti,twl4030-keypad";
+ interrupts = <1>;
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ };
diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
new file mode 100644
index 000000000..f5021214e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
@@ -0,0 +1,21 @@
+Texas Instruments TWL family (twl4030) pwrbutton module
+
+This module is part of the TWL4030. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/twl-family.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+ - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
+- interrupts: should be one of the following
+ - <8>: For controllers compatible with twl4030
+
+Example:
+
+&twl {
+ twl_pwrbutton: pwrbutton {
+ compatible = "ti,twl4030-pwrbutton";
+ interrupts = <8>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt
new file mode 100644
index 000000000..43ef770df
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt
@@ -0,0 +1,22 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor Power Button Bindings
+
+RAVE SP input device is a "MFD cell" device corresponding to power
+button functionality of RAVE Supervisory Processor. It is expected
+that its Device Tree node is specified as a child of the node
+corresponding to the parent RAVE SP device (as documented in
+Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
+
+Required properties:
+
+- compatible: Should be "zii,rave-sp-pwrbutton"
+
+Example:
+
+ rave-sp {
+ compatible = "zii,rave-sp-rdu1";
+ current-speed = <38400>;
+
+ pwrbutton {
+ compatible = "zii,rave-sp-pwrbutton";
+ };
+ }