summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml')
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml296
1 files changed, 296 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
new file mode 100644
index 000000000..9f7d3e11a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -0,0 +1,296 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller, version 3
+
+maintainers:
+ - Marc Zyngier <maz@kernel.org>
+
+description: |
+ AArch64 SMP cores are often associated with a GICv3, providing Private
+ Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+ Software Generated Interrupts (SGI), and Locality-specific Peripheral
+ Interrupts (LPI).
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qcom,msm8996-gic-v3
+ - const: arm,gic-v3
+ - const: arm,gic-v3
+
+ interrupt-controller: true
+
+ "#address-cells":
+ enum: [ 0, 1, 2 ]
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ "#interrupt-cells":
+ description: |
+ Specifies the number of cells needed to encode an interrupt source.
+ Must be a single cell with a value of at least 3.
+ If the system requires describing PPI affinity, then the value must
+ be at least 4.
+
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts, 2 for interrupts in the Extended SPI range, 3 for the
+ Extended PPI range. Other values are reserved for future use.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15]. Extented SPI interrupts are in the range [0-1023].
+ Extended PPI interrupts are in the range [0-127].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = edge triggered
+ 4 = level triggered
+
+ The 4th cell is a phandle to a node describing a set of CPUs this
+ interrupt is affine to. The interrupt must be a PPI, and the node
+ pointed must be a subnode of the "ppi-partitions" subnode. For
+ interrupt types other than PPI or PPIs that are not partitionned,
+ this cell must be zero. See the "ppi-partitions" node description
+ below.
+
+ Cells 5 and beyond are reserved for future use and must have a value
+ of 0 if present.
+ enum: [ 3, 4 ]
+
+ reg:
+ description: |
+ Specifies base physical address(s) and size of the GIC
+ registers, in the following order:
+ - GIC Distributor interface (GICD)
+ - GIC Redistributors (GICR), one range per redistributor region
+ - GIC CPU interface (GICC)
+ - GIC Hypervisor interface (GICH)
+ - GIC Virtual CPU interface (GICV)
+
+ GICC, GICH and GICV are optional, but must be described if the CPUs
+ support them. Examples of such CPUs are ARM's implementations of the
+ ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
+ A73 (this list is not exhaustive).
+
+ minItems: 2
+ maxItems: 4096 # Should be enough?
+
+ interrupts:
+ description:
+ Interrupt source of the VGIC maintenance interrupt.
+ maxItems: 1
+
+ redistributor-stride:
+ description:
+ If using padding pages, specifies the stride of consecutive
+ redistributors. Must be a multiple of 64kB.
+ $ref: /schemas/types.yaml#/definitions/uint64
+ multipleOf: 0x10000
+ exclusiveMinimum: 0
+
+ "#redistributor-regions":
+ description:
+ The number of independent contiguous regions occupied by the
+ redistributors. Required if more than one such region is present.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 4096
+
+ msi-controller:
+ description:
+ Only present if the Message Based Interrupt functionnality is
+ being exposed by the HW, and the mbi-ranges property present.
+
+ mbi-ranges:
+ description:
+ A list of pairs <intid span>, where "intid" is the first SPI of a range
+ that can be used an MBI, and "span" the size of that range. Multiple
+ ranges can be provided.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ minItems: 2
+ maxItems: 2
+
+ mbi-alias:
+ description:
+ Address property. Base address of an alias of the GICD region containing
+ only the {SET,CLR}SPI registers to be used if isolation is required,
+ and if supported by the HW.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minItems: 1
+ maxItems: 2
+
+ ppi-partitions:
+ type: object
+ description:
+ PPI affinity can be expressed as a single "ppi-partitions" node,
+ containing a set of sub-nodes.
+ patternProperties:
+ "^interrupt-partition-[0-9]+$":
+ type: object
+ properties:
+ affinity:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ Should be a list of phandles to CPU nodes (as described in
+ Documentation/devicetree/bindings/arm/cpus.yaml).
+
+ required:
+ - affinity
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: aclk
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+dependencies:
+ mbi-ranges: [ msi-controller ]
+ msi-controller: [ mbi-ranges ]
+
+required:
+ - compatible
+ - reg
+
+patternProperties:
+ "^gic-its@": false
+ "^interrupt-controller@[0-9a-f]+$": false
+ # msi-controller is preferred, but allow other names
+ "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$":
+ type: object
+ description:
+ GICv3 has one or more Interrupt Translation Services (ITS) that are
+ used to route Message Signalled Interrupts (MSI) to the CPUs.
+ properties:
+ compatible:
+ const: arm,gic-v3-its
+
+ msi-controller: true
+
+ "#msi-cells":
+ description:
+ The single msi-cell is the DeviceID of the device which will generate
+ the MSI.
+ const: 1
+
+ reg:
+ description:
+ Specifies the base physical address and size of the ITS registers.
+ maxItems: 1
+
+ socionext,synquacer-pre-its:
+ description:
+ (u32, u32) tuple describing the untranslated
+ address and size of the pre-ITS window.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minItems: 2
+ maxItems: 2
+
+ required:
+ - compatible
+ - msi-controller
+ - "#msi-cells"
+ - reg
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ gic: interrupt-controller@2cf00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ reg = <0x2f000000 0x10000>, // GICD
+ <0x2f100000 0x200000>, // GICR
+ <0x2c000000 0x2000>, // GICC
+ <0x2c010000 0x2000>, // GICH
+ <0x2c020000 0x2000>; // GICV
+ interrupts = <1 9 4>;
+
+ msi-controller;
+ mbi-ranges = <256 128>;
+
+ msi-controller@2c200000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c200000 0x20000>;
+ };
+ };
+
+ - |
+ interrupt-controller@2c010000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ redistributor-stride = <0x0 0x40000>; // 256kB stride
+ #redistributor-regions = <2>;
+ reg = <0x2c010000 0x10000>, // GICD
+ <0x2d000000 0x800000>, // GICR 1: CPUs 0-31
+ <0x2e000000 0x800000>, // GICR 2: CPUs 32-63
+ <0x2c040000 0x2000>, // GICC
+ <0x2c060000 0x2000>, // GICH
+ <0x2c080000 0x2000>; // GICV
+ interrupts = <1 9 4 0>;
+
+ msi-controller@2c200000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c200000 0x20000>;
+ };
+
+ msi-controller@2c400000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c400000 0x20000>;
+ };
+
+ ppi-partitions {
+ part0: interrupt-partition-0 {
+ affinity = <&cpu0>, <&cpu2>;
+ };
+
+ part1: interrupt-partition-1 {
+ affinity = <&cpu1>, <&cpu3>;
+ };
+ };
+ };
+
+
+ device@0 {
+ reg = <0 4>;
+ interrupts = <1 1 4 &part0>;
+ };
+
+...