diff options
Diffstat (limited to 'Documentation/devicetree/bindings/leds')
75 files changed, 6058 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt new file mode 100644 index 000000000..4af2987b2 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt @@ -0,0 +1,85 @@ +Analog devices AS3645A device tree bindings + +The AS3645A flash LED controller can drive two LEDs, one high current +flash LED and one indicator LED. The high current flash LED can be +used in torch mode as well. + +Ranges below noted as [a, b] are closed ranges between a and b, i.e. a +and b are included in the range. + +Please also see common.txt in the same directory. + + +Required properties +=================== + +compatible : Must be "ams,as3645a". +reg : The I2C address of the device. Typically 0x30. +#address-cells : 1 +#size-cells : 0 + + +Required properties of the flash child node (0) +=============================================== + +reg: 0 +flash-timeout-us: Flash timeout in microseconds. The value must be in + the range [100000, 850000] and divisible by 50000. +flash-max-microamp: Maximum flash current in microamperes. Has to be + in the range between [200000, 500000] and + divisible by 20000. +led-max-microamp: Maximum torch (assist) current in microamperes. The + value must be in the range between [20000, 160000] and + divisible by 20000. +ams,input-max-microamp: Maximum flash controller input current. The + value must be in the range [1250000, 2000000] + and divisible by 50000. + + +Optional properties of the flash child node +=========================================== + +function : See Documentation/devicetree/bindings/leds/common.txt. +color : See Documentation/devicetree/bindings/leds/common.txt. +label : See Documentation/devicetree/bindings/leds/common.txt (deprecated). + + +Required properties of the indicator child node (1) +=================================================== + +reg: 1 +led-max-microamp: Maximum indicator current. The allowed values are + 2500, 5000, 7500 and 10000. + +Optional properties of the indicator child node +=============================================== + +function : See Documentation/devicetree/bindings/leds/common.txt. +color : See Documentation/devicetree/bindings/leds/common.txt. +label : See Documentation/devicetree/bindings/leds/common.txt (deprecated). + + +Example +======= + +#include <dt-bindings/leds/common.h> + + as3645a@30 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30>; + compatible = "ams,as3645a"; + led@0 { + reg = <0x0>; + flash-timeout-us = <150000>; + flash-max-microamp = <320000>; + led-max-microamp = <60000>; + ams,input-max-microamp = <1750000>; + function = LED_FUNCTION_FLASH; + }; + led@1 { + reg = <0x1>; + led-max-microamp = <10000>; + function = LED_FUNCTION_INDICATOR; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt b/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt new file mode 100644 index 000000000..261df2799 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt @@ -0,0 +1,15 @@ +88pm860x-backlight bindings + +Optional properties: + - marvell,88pm860x-iset: Current supplies on backlight device. + - marvell,88pm860x-pwm: PWM frequency on backlight device. + +Example: + + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt new file mode 100644 index 000000000..230abdefd --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt @@ -0,0 +1,33 @@ +Binding for ArcticSand arc2c0608 LED driver + +Required properties: +- compatible: should be "arc,arc2c0608" +- reg: slave address + +Optional properties: +- default-brightness: brightness value on boot, value from: 0-4095 +- label: The name of the backlight device + See Documentation/devicetree/bindings/leds/common.txt +- led-sources: List of enabled channels from 0 to 5. + See Documentation/devicetree/bindings/leds/common.txt + +- arc,led-config-0: setting for register ILED_CONFIG_0 +- arc,led-config-1: setting for register ILED_CONFIG_1 +- arc,dim-freq: PWM mode frequence setting (bits [3:0] used) +- arc,comp-config: setting for register CONFIG_COMP +- arc,filter-config: setting for register FILTER_CONFIG +- arc,trim-config: setting for register IMAXTUNE + +Note: Optional properties not specified will default to values in IC EPROM + +Example: + +arc2c0608@30 { + compatible = "arc,arc2c0608"; + reg = <0x30>; + default-brightness = <500>; + label = "lcd-backlight"; + linux,default-trigger = "backlight"; + led-sources = <0 1 2 5>; +}; + diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml new file mode 100644 index 000000000..3b60afbab --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common backlight properties + +maintainers: + - Lee Jones <lee@kernel.org> + - Daniel Thompson <daniel.thompson@linaro.org> + - Jingoo Han <jingoohan1@gmail.com> + +description: + Backlight devices provide backlight for different types of graphical + displays. They are typically but not necessarily implemented using a white + LED powered by a boost converter. + +properties: + default-brightness: + description: + The default brightness that should be applied to the LED by the operating + system on start-up. The brightness should not exceed the brightness the + LED can provide. + $ref: /schemas/types.yaml#/definitions/uint32 + + max-brightness: + description: + Normally the maximum brightness is determined by the hardware and this + property is not required. This property is used to put a software limit + on the brightness apart from what the driver says, as it could happen + that a LED can be made so bright that it gets damaged or causes damage + due to restrictions in a specific system, such as mounting conditions. + $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml new file mode 100644 index 000000000..3300451fc --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: gpio-backlight bindings + +maintainers: + - Lee Jones <lee@kernel.org> + - Daniel Thompson <daniel.thompson@linaro.org> + - Jingoo Han <jingoohan1@gmail.com> + +properties: + compatible: + const: gpio-backlight + + gpios: + description: The gpio that is used for enabling/disabling the backlight. + maxItems: 1 + + default-on: + description: enable the backlight at boot. + type: boolean + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + backlight { + compatible = "gpio-backlight"; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + default-on; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml new file mode 100644 index 000000000..73fa59e62 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kinetic Technologies KTD253 and KTD259 one-wire backlight + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Kinetic Technologies KTD253 and KTD259 are white LED backlights + controlled by a single GPIO line. If you just turn on the backlight + it goes to maximum backlight then you can set the level of backlight + using pulses on the enable wire. This is sometimes referred to as + "expresswire". + +allOf: + - $ref: common.yaml# + +properties: + compatible: + items: + - enum: + - kinetic,ktd253 + - kinetic,ktd259 + + enable-gpios: + description: GPIO to use to enable/disable and dim the backlight. + maxItems: 1 + + default-brightness: true + max-brightness: true + +required: + - compatible + - enable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + backlight { + compatible = "kinetic,ktd253"; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + default-brightness = <13>; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml new file mode 100644 index 000000000..0793d0adc --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: led-backlight bindings + +maintainers: + - Lee Jones <lee@kernel.org> + - Daniel Thompson <daniel.thompson@linaro.org> + - Jingoo Han <jingoohan1@gmail.com> + +description: + This binding is used to describe a basic backlight device made of LEDs. It + can also be used to describe a backlight device controlled by the output of + a LED driver. + +properties: + compatible: + const: led-backlight + + leds: + description: A list of LED nodes + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + + brightness-levels: + description: + Array of distinct brightness levels. The levels must be in the range + accepted by the underlying LED devices. This is used to translate a + backlight brightness level into a LED brightness level. If it is not + provided, the identity mapping is used. + $ref: /schemas/types.yaml#/definitions/uint32-array + + default-brightness-level: + description: + The default brightness level (index into the array defined by the + "brightness-levels" property). + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - leds + +additionalProperties: false + +examples: + - | + backlight { + compatible = "led-backlight"; + + leds = <&led1>, <&led2>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml new file mode 100644 index 000000000..3c9b4054e --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/lm3630a-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LM3630A High-Efficiency Dual-String White LED + +maintainers: + - Lee Jones <lee@kernel.org> + - Daniel Thompson <daniel.thompson@linaro.org> + - Jingoo Han <jingoohan1@gmail.com> + +description: | + The LM3630A is a current-mode boost converter which supplies the power and + controls the current in up to two strings of 10 LEDs per string. + https://www.ti.com/product/LM3630A + +properties: + compatible: + const: ti,lm3630a + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + enable-gpios: + description: GPIO to use to enable/disable the backlight (HWEN pin). + maxItems: 1 + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +patternProperties: + "^led@[01]$": + type: object + description: | + Properties for a string of connected LEDs. + + properties: + reg: + description: | + The control bank that is used to program the two current sinks. The + LM3630A has two control banks (A and B) and are represented as 0 or 1 + in this property. The two current sinks can be controlled + independently with both banks, or bank A can be configured to control + both sinks with the led-sources property. + minimum: 0 + maximum: 1 + + label: + maxItems: 1 + + led-sources: + allOf: + - minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + default-brightness: + description: Default brightness level on boot. + minimum: 0 + maximum: 255 + + max-brightness: + description: Maximum brightness that is allowed during runtime. + minimum: 0 + maximum: 255 + + ti,linear-mapping-mode: + description: | + Enable linear mapping mode. If disabled, then it will use exponential + mapping mode in which the ramp up/down appears to have a more uniform + transition to the human eye. + type: boolean + + required: + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@38 { + compatible = "ti,lm3630a"; + reg = <0x38>; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; + max-brightness = <255>; + }; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@38 { + compatible = "ti,lm3630a"; + reg = <0x38>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + default-brightness = <150>; + ti,linear-mapping-mode; + }; + + led@1 { + reg = <1>; + default-brightness = <225>; + ti,linear-mapping-mode; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt new file mode 100644 index 000000000..88f56641f --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt @@ -0,0 +1,72 @@ +lp855x bindings + +Required properties: + - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553", + "ti,lp8555", "ti,lp8556", "ti,lp8557" + - reg: I2C slave address (u8) + - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device. + +Optional properties: + - bl-name: Backlight device name (string) + - init-brt: Initial value of backlight brightness (u8) + - pwm-period: PWM period value. Set only PWM input mode used (u32) + - rom-addr: Register address of ROM area to be updated (u8) + - rom-val: Register value to be updated (u8) + - power-supply: Regulator which controls the 3V rail + - enable-supply: Regulator which controls the EN/VDDIO input + +Example: + + /* LP8555 */ + backlight@2c { + compatible = "ti,lp8555"; + reg = <0x2c>; + + dev-ctrl = /bits/ 8 <0x00>; + pwm-period = <10000>; + + /* 4V OV, 4 output LED0 string enabled */ + rom_14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0xcf>; + }; + + /* Heavy smoothing, 24ms ramp time step */ + rom_15h { + rom-addr = /bits/ 8 <0x15>; + rom-val = /bits/ 8 <0xc7>; + }; + + /* 4 output LED1 string enabled */ + rom_19h { + rom-addr = /bits/ 8 <0x19>; + rom-val = /bits/ 8 <0x0f>; + }; + }; + + /* LP8556 */ + backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + + bl-name = "lcd-bl"; + dev-ctrl = /bits/ 8 <0x85>; + init-brt = /bits/ 8 <0x10>; + }; + + /* LP8557 */ + backlight@2c { + compatible = "ti,lp8557"; + reg = <0x2c>; + enable-supply = <&backlight_vddio>; + power-supply = <&backlight_vdd>; + + dev-ctrl = /bits/ 8 <0x41>; + init-brt = /bits/ 8 <0x0a>; + + /* 4V OV, 4 output LED string enabled */ + rom_14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0xcf>; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt new file mode 100644 index 000000000..b4cffdaa4 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt @@ -0,0 +1,10 @@ +88pm860x-backlight bindings + +Optional properties: + - maxim,max8925-dual-string: whether support dual string + +Example: + + backlights { + maxim,max8925-dual-string = <0>; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml new file mode 100644 index 000000000..5533b6562 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6370 Backlight + +maintainers: + - ChiaEn Wu <chiaen_wu@richtek.com> + +description: | + This module is part of the MT6370 MFD device. + The MT6370 Backlight WLED driver supports up to a 29V output voltage for + 4 channels of 8 series WLEDs. Each channel supports up to 30mA of current + capability with 2048 current steps (11 bits, only for MT6370/MT6371) or + 16384 current steps (14 bits, only for MT6372) in exponential or linear + mapping curves. + +allOf: + - $ref: common.yaml# + +properties: + compatible: + enum: + - mediatek,mt6370-backlight + - mediatek,mt6372-backlight + + default-brightness: + minimum: 0 + + max-brightness: + minimum: 0 + + enable-gpios: + description: External backlight 'enable' pin + maxItems: 1 + + mediatek,bled-pwm-enable: + description: | + Enable external PWM input for backlight dimming + type: boolean + + mediatek,bled-pwm-hys-enable: + description: | + Enable the backlight input-hysteresis for PWM mode + type: boolean + + mediatek,bled-pwm-hys-input-th-steps: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [1, 4, 16, 64] + description: | + The selection of the upper and lower bounds threshold of backlight + PWM resolution. If we choose selection 64, the variation of PWM + resolution needs more than 64 steps. + + mediatek,bled-ovp-shutdown: + description: | + Enable the backlight shutdown when OVP level triggered + type: boolean + + mediatek,bled-ovp-microvolt: + enum: [17000000, 21000000, 25000000, 29000000] + description: | + Backlight OVP level selection. + + mediatek,bled-ocp-shutdown: + description: | + Enable the backlight shutdown when OCP level triggerred. + type: boolean + + mediatek,bled-ocp-microamp: + enum: [900000, 1200000, 1500000, 1800000] + description: | + Backlight OC level selection. + + mediatek,bled-exponential-mode-enable: + description: | + Enable the exponential mode of backlight brightness. If this property + is not enabled, the default is to use linear mode. + type: boolean + + mediatek,bled-channel-use: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Backlight LED channel to be used. + Each bit mapping to: + - 0: CH4 + - 1: CH3 + - 2: CH2 + - 3: CH1 + minimum: 1 + maximum: 15 + +if: + properties: + compatible: + contains: + const: mediatek,mt6372-backlight + +then: + properties: + default-brightness: + maximum: 16384 + + max-brightness: + maximum: 16384 + +else: + properties: + default-brightness: + maximum: 2048 + + max-brightness: + maximum: 2048 + +required: + - compatible + - mediatek,bled-channel-use + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml new file mode 100644 index 000000000..78fbe20a1 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: pwm-backlight bindings + +maintainers: + - Lee Jones <lee@kernel.org> + - Daniel Thompson <daniel.thompson@linaro.org> + - Jingoo Han <jingoohan1@gmail.com> + +properties: + compatible: + const: pwm-backlight + + pwms: + maxItems: 1 + + pwm-names: true + + power-supply: + description: regulator for supply voltage + + enable-gpios: + description: + Contains a single GPIO specifier for the GPIO which enables and disables + the backlight. + maxItems: 1 + + post-pwm-on-delay-ms: + description: + Delay in ms between setting an initial (non-zero) PWM and enabling the + backlight using GPIO. + + pwm-off-delay-ms: + description: + Delay in ms between disabling the backlight using GPIO and setting PWM + value to 0. + + brightness-levels: + description: + Array of distinct brightness levels. Typically these are in the range + from 0 to 255, but any range starting at 0 will do. The actual brightness + level (PWM duty cycle) will be interpolated from these values. 0 means a + 0% duty cycle (darkest/off), while the last value in the array represents + a 100% duty cycle (brightest). + $ref: /schemas/types.yaml#/definitions/uint32-array + + default-brightness-level: + description: + The default brightness level (index into the array defined by the + "brightness-levels" property). + $ref: /schemas/types.yaml#/definitions/uint32 + + num-interpolated-steps: + description: + Number of interpolated steps between each value of brightness-levels + table. This way a high resolution pwm duty cycle can be used without + having to list out every possible value in the brightness-level array. + $ref: /schemas/types.yaml#/definitions/uint32 + +dependencies: + default-brightness-level: [brightness-levels] + num-interpolated-steps: [brightness-levels] + +required: + - compatible + - pwms + - power-supply + +additionalProperties: false + +examples: + - | + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <&vdd_bl_reg>; + enable-gpios = <&gpio 58 0>; + post-pwm-on-delay-ms = <10>; + pwm-off-delay-ms = <10>; + }; + + - | + // Example using num-interpolation-steps: + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 2048 4096 8192 16384 65535>; + num-interpolated-steps = <2048>; + default-brightness-level = <4096>; + + power-supply = <&vdd_bl_reg>; + enable-gpios = <&gpio 58 0>; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml new file mode 100644 index 000000000..4c15693f7 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -0,0 +1,262 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for Qualcomm Technologies, Inc. WLED driver + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Kiran Gunda <kgunda@codeaurora.org> + +description: | + WLED (White Light Emitting Diode) driver is used for controlling display + backlight that is part of PMIC on Qualcomm Technologies, Inc. reference + platforms. The PMIC is connected to the host processor via SPMI bus. + +properties: + compatible: + enum: + - qcom,pm8941-wled + - qcom,pmi8994-wled + - qcom,pmi8998-wled + - qcom,pm660l-wled + - qcom,pm6150l-wled + - qcom,pm8150l-wled + + reg: + minItems: 1 + maxItems: 2 + + default-brightness: + description: | + brightness value on boot. + + label: true + + max-brightness: + description: | + Maximum brightness level. + + qcom,cs-out: + description: | + enable current sink output. + This property is supported only for WLED3. + type: boolean + + qcom,cabc: + description: | + enable content adaptive backlight control. + type: boolean + + qcom,ext-gen: + description: | + use externally generated modulator signal to dim. + This property is supported only for WLED3. + type: boolean + + qcom,current-limit: + description: | + mA; per-string current limit. + This property is supported only for WLED3. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 20 + minimum: 0 + maximum: 25 + + qcom,current-limit-microamp: + description: | + uA; per-string current limit. + default: 25 + minimum: 0 + maximum: 30000 + multipleOf: 25 + + qcom,current-boost-limit: + description: | + mA; boost current limit. + $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,switching-freq: + description: | + kHz; switching frequency. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, + 2400, 3200, 4800, 9600 ] + + qcom,ovp: + description: | + V; Over-voltage protection limit. + This property is supported only for WLED3. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 27, 29, 32, 35 ] + default: 29 + + qcom,ovp-millivolt: + description: | + Over-voltage protection limit. This property is for WLED4 only. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 18100, 19600, 29600, 31100 ] + default: 29600 + + qcom,num-strings: + description: | + number of led strings attached. + $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,enabled-strings: + description: | + Array of the WLED strings numbered from 0 to 3. Each + string of leds are operated individually. Specify the + list of strings used by the device. Any combination of + led strings can be used. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + + qcom,external-pfet: + description: | + Specify if external PFET control for short circuit + protection is used. This property is supported only + for WLED4. + type: boolean + + qcom,auto-string-detection: + description: | + Enables auto-detection of the WLED string configuration. + This feature is not supported for WLED3. + type: boolean + + interrupts: + minItems: 1 + items: + - description: over voltage protection interrupt. + - description: short circuit interrupt. + + interrupt-names: + minItems: 1 + items: + - const: ovp + - const: short + + qcom,modulator-sel: + description: | + Selects the modulator used for brightness modulation. + Allowed values are, + 0 - Modulator A + 1 - Modulator B + This property is applicable only to WLED5 peripheral. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + default: 0 + + qcom,cabc-sel: + description: | + Selects the CABC pin signal used for brightness modulation. + Allowed values are, + 0 - CABC disabled + 1 - CABC 1 + 2 - CABC 2 + 3 - External signal (e.g. LPG) is used for dimming + This property is applicable only to WLED5 peripheral. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,pm8941-wled + + then: + properties: + reg: + maxItems: 1 + + qcom,current-boost-limit: + enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ] + default: 805 + + qcom,switching-freq: + default: 1600 + + qcom,num-strings: + enum: [ 1, 2, 3 ] + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + else: + properties: + reg: + minItems: 2 + + qcom,current-boost-limit: + enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ] + default: 970 + + qcom,switching-freq: + default: 800 + + qcom,num-strings: + enum: [ 1, 2, 3, 4 ] + + interrupts: + minItems: 2 + + interrupt-names: + minItems: 2 + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8150l-wled + + then: + properties: + default-brightness: + minimum: 0 + maximum: 32767 + + max-brightness: + minimum: 0 + maximum: 32767 + + else: + properties: + default-brightness: + minimum: 0 + maximum: 4095 + + max-brightness: + minimum: 0 + maximum: 4095 + +required: + - compatible + - reg + - label + +additionalProperties: false + +examples: + - | + backlight@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800 0x100>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; + qcom,enabled-strings = <0 1>; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml new file mode 100644 index 000000000..99e9e138f --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/richtek,rt4831-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 Backlight + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + RT4831 is a mutifunctional device that can provide power to the LCD display + and LCD backlight. + + For the LCD backlight, it can provide four channel WLED driving capability. + Each channel driving current is up to 30mA + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +allOf: + - $ref: common.yaml# + +properties: + compatible: + const: richtek,rt4831-backlight + + default-brightness: + minimum: 0 + maximum: 2048 + + max-brightness: + minimum: 0 + maximum: 2048 + + richtek,pwm-enable: + description: | + Specify the backlight dimming following by PWM duty or by SW control. + type: boolean + + richtek,bled-ovp-sel: + description: | + Backlight OVP level selection, currently support 17V/21V/25V/29V. + $ref: /schemas/types.yaml#/definitions/uint8 + default: 1 + minimum: 0 + maximum: 3 + + richtek,bled-ocp-microamp: + description: | + Backlight over current protection level. + enum: [900000, 1200000, 1500000, 1800000] + + richtek,channel-use: + description: | + Backlight LED channel to be used. + BIT 0/1/2/3 is used to indicate led channel 1/2/3/4 enable or disable. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + +required: + - compatible + - richtek,channel-use + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt new file mode 100644 index 000000000..8bf2940f5 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be "skyworks,sky81452-backlight" + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios : GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- led-sources : List of enabled channels from 0 to 5. + See Documentation/devicetree/bindings/leds/common.txt +- skyworks,ignore-pwm : Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,short-detection-threshold-volt + : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit-mA + : It should be 2300mA or 2750mA. + +Example: + + backlight { + compatible = "skyworks,sky81452-backlight"; + name = "pwm-backlight"; + led-sources = <0 1 2 5>; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,current-limit-mA = <2300>; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt new file mode 100644 index 000000000..5fb9279ac --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt @@ -0,0 +1,27 @@ +TPS65217 family of regulators + +The TPS65217 chip contains a boost converter and current sinks which can be +used to drive LEDs for use as backlights. + +Required properties: +- compatible: "ti,tps65217" +- reg: I2C slave address +- backlight: node for specifying WLED1 and WLED2 lines in TPS65217 +- isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level) +- fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000 +- default-brightness: valid values: 0-100 + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps: tps@24 { + reg = <0x24>; + compatible = "ti,tps65217"; + backlight { + isel = <1>; /* 1 - ISET1, 2 ISET2 */ + fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ + default-brightness = <50>; + }; + }; + diff --git a/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt new file mode 100644 index 000000000..ff5c92138 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt @@ -0,0 +1,23 @@ +Zodiac Inflight Innovations RAVE Supervisory Processor Backlight Bindings + +RAVE SP backlight device is a "MFD cell" device corresponding to +backlight functionality of RAVE Supervisory Processor. It is expected +that its Device Tree node is specified as a child of the node +corresponding to the parent RAVE SP device (as documented in +Documentation/devicetree/bindings/mfd/zii,rave-sp.txt) + +Required properties: + +- compatible: Should be "zii,rave-sp-backlight" + +Example: + + rave-sp { + compatible = "zii,rave-sp-rdu1"; + current-speed = <38400>; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + } + diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt new file mode 100644 index 000000000..26d770ef3 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -0,0 +1 @@ +This file has moved to ./common.yaml. diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml new file mode 100644 index 000000000..3c14a9843 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -0,0 +1,241 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common leds properties + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: + LED and flash LED devices provide the same basic functionality as current + regulators, but extended with LED and flash LED specific features like + blinking patterns, flash timeout, flash faults and external flash strobe mode. + + Many LED devices expose more than one current output that can be connected + to one or more discrete LED component. Since the arrangement of connections + can influence the way of the LED device initialization, the LED components + have to be tightly coupled with the LED device binding. They are represented + by child nodes of the parent LED device binding. + +properties: + led-sources: + description: + List of device current outputs the LED is connected to. The outputs are + identified by the numbers that must be defined in the LED device binding + documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array + + function: + description: + LED function. Use one of the LED_FUNCTION_* prefixed definitions + from the header include/dt-bindings/leds/common.h. If there is no + matching LED_FUNCTION available, add a new one. + $ref: /schemas/types.yaml#/definitions/string + + color: + description: + Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from + the header include/dt-bindings/leds/common.h. If there is no matching + LED_COLOR_ID available, add a new one. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 9 + + function-enumerator: + description: + Integer to be used when more than one instance of the same function is + needed, differing only with an ordinal number. + $ref: /schemas/types.yaml#/definitions/uint32 + + label: + description: + The label for this LED. If omitted, the label is taken from the node name + (excluding the unit address). It has to uniquely identify a device, i.e. + no other LED class device can be assigned the same label. This property is + deprecated - use 'function' and 'color' properties instead. + function-enumerator has no effect when this property is present. + + default-state: + description: + The initial state of the LED. If the LED is already on or off and the + default-state property is set the to same value, then no glitch should be + produced where the LED momentarily turns off (or on). The "keep" setting + will keep the LED at whatever its current state is, without producing a + glitch. + $ref: /schemas/types.yaml#/definitions/string + enum: + - on + - off + - keep + default: off + + linux,default-trigger: + description: + This parameter, if present, is a string defining the trigger assigned to + the LED. + $ref: /schemas/types.yaml#/definitions/string + + oneOf: + - enum: + # LED will act as a back-light, controlled by the framebuffer system + - backlight + # LED will turn on (but for leds-gpio see "default-state" property in + # Documentation/devicetree/bindings/leds/leds-gpio.yaml) + - default-on + # LED "double" flashes at a load average based rate + - heartbeat + # LED indicates disk activity + - disk-activity + # LED indicates IDE disk activity (deprecated), in new implementations + # use "disk-activity" + - ide-disk + # LED flashes at a fixed, configurable rate + - timer + # LED alters the brightness for the specified duration with one software + # timer (requires "led-pattern" property) + - pattern + # LED is triggered by SD/MMC activity + - pattern: "^mmc[0-9]+$" + + led-pattern: + description: | + Array of integers with default pattern for certain triggers. + + Each trigger may parse this property differently: + - one-shot : two numbers specifying delay on and delay off (in ms), + - timer : two numbers specifying delay on and delay off (in ms), + - pattern : the pattern is given by a series of tuples, of + brightness and duration (in ms). The exact format is + described in: + Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 + + led-max-microamp: + description: + Maximum LED supply current in microamperes. This property can be made + mandatory for the board configurations introducing a risk of hardware + damage in case an excessive current is set. + For flash LED controllers with configurable current this property is + mandatory for the LEDs in the non-flash modes (e.g. torch or indicator). + + panic-indicator: + description: + This property specifies that the LED should be used, if at all possible, + as a panic indicator. + type: boolean + + retain-state-shutdown: + description: + This property specifies that the LED should not be turned off or changed + when the system shuts down. + type: boolean + + trigger-sources: + description: | + List of devices which should be used as a source triggering this LED + activity. Some LEDs can be related to a specific device and should somehow + indicate its state. E.g. USB 2.0 LED may react to device(s) in a USB 2.0 + port(s). + Another common example is switch or router with multiple Ethernet ports + each of them having its own LED assigned (assuming they are not + hardwired). In such cases this property should contain phandle(s) of + related source device(s). + In many cases LED can be related to more than one device (e.g. one USB LED + vs. multiple USB ports). Each source should be represented by a node in + the device tree and be referenced by a phandle and a set of phandle + arguments. A length of arguments should be specified by the + #trigger-source-cells property in the source node. + $ref: /schemas/types.yaml#/definitions/phandle-array + + # Required properties for flash LED child nodes: + flash-max-microamp: + description: + Maximum flash LED supply current in microamperes. Required for flash LED + nodes with configurable current. + + flash-max-timeout-us: + description: + Maximum timeout in microseconds after which the flash LED is turned off. + Required for flash LED nodes with configurable timeout. + +additionalProperties: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + function = LED_FUNCTION_USB; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + }; + }; + + - | + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "maxim,max77693-led"; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <0>, <1>; + led-max-microamp = <50000>; + flash-max-microamp = <320000>; + flash-max-timeout-us = <500000>; + }; + }; + + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml new file mode 100644 index 000000000..14bebe1ad --- /dev/null +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/cznic,turris-omnia-leds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CZ.NIC's Turris Omnia LEDs driver + +maintainers: + - Marek Behún <kabel@kernel.org> + +description: + This module adds support for the RGB LEDs found on the front panel of the + Turris Omnia router. There are 12 RGB LEDs that are controlled by a + microcontroller that communicates via the I2C bus. Each LED is described + as a subnode of this I2C device. + +properties: + compatible: + const: cznic,turris-omnia-leds + + reg: + description: I2C slave address of the microcontroller. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^multi-led@[0-9a-b]$": + type: object + $ref: leds-class-multicolor.yaml# + unevaluatedProperties: false + + description: + This node represents one of the RGB LED devices on Turris Omnia. + No subnodes need to be added for subchannels since this controller only + supports RGB LEDs. + + properties: + reg: + minimum: 0 + maximum: 11 + description: + This property identifies one of the LEDs on the front panel of the + Turris Omnia router. + + required: + - reg + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/leds/common.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@2b { + compatible = "cznic,turris-omnia-leds"; + reg = <0x2b>; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + /* + * No subnodes are needed, this controller only supports RGB + * LEDs. + */ + reg = <0>; + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_POWER; + linux,default-trigger = "heartbeat"; + }; + + multi-led@a { + reg = <0xa>; + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt new file mode 100644 index 000000000..cbe8dfd29 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt @@ -0,0 +1,14 @@ +Device tree bindings for IR LED connected through gpio pin which is used as +remote controller transmitter. + +Required properties: + - compatible: should be "gpio-ir-tx". + - gpios : Should specify the IR LED GPIO, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs + should be indicated using flags in the GPIO specifier. + +Example: + irled@0 { + compatible = "gpio-ir-tx"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt new file mode 100644 index 000000000..66e5672c2 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt @@ -0,0 +1,13 @@ +Device tree bindings for IR LED connected through pwm pin which is used as +remote controller transmitter. + +Required properties: + - compatible: should be "pwm-ir-tx". + - pwms : PWM property to point to the PWM device (phandle)/port (id) + and to specify the period time to be used: <&phandle id period_ns>; + +Example: + irled { + compatible = "pwm-ir-tx"; + pwms = <&pwm0 0 10000000>; + }; diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt new file mode 100644 index 000000000..83ff1b4d7 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt @@ -0,0 +1,29 @@ +Device tree bindings for IR LED connected through SPI bus which is used as +remote controller. + +The IR LED switch is connected to the MOSI line of the SPI device and the data +are delivered thourgh that. + +Required properties: + - compatible: should be "ir-spi-led". + +Optional properties: + - duty-cycle: 8 bit value that represents the percentage of one period + in which the signal is active. It can be 50, 60, 70, 75, 80 or 90. + - led-active-low: boolean value that specifies whether the output is + negated with a NOT gate. + - power-supply: specifies the power source. It can either be a regulator + or a gpio which enables a regulator, i.e. a regulator-fixed as + described in + Documentation/devicetree/bindings/regulator/fixed-regulator.yaml + +Example: + + irled@0 { + compatible = "ir-spi-led"; + reg = <0x0>; + spi-max-frequency = <5000000>; + power-supply = <&vdd_led>; + led-active-low; + duty-cycle = /bits/ 8 <60>; + }; diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml new file mode 100644 index 000000000..940333f2d --- /dev/null +++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/issi,is31fl319x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ISSI LED controllers bindings for IS31FL319{0,1,3,6,9} + +maintainers: + - Vincent Knecht <vincent.knecht@mailoo.org> + +description: | + The IS31FL319X are LED controllers with I2C interface. + Previously known as Si-En SN319{0,1,3,6,9}. + + For more product information please see the links below: + https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf + https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf + https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf + https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf + https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf + +properties: + compatible: + enum: + - issi,is31fl3190 + - issi,is31fl3191 + - issi,is31fl3193 + - issi,is31fl3196 + - issi,is31fl3199 + - si-en,sn3190 + - si-en,sn3191 + - si-en,sn3193 + - si-en,sn3196 + - si-en,sn3199 + + reg: + maxItems: 1 + + shutdown-gpios: + maxItems: 1 + description: GPIO attached to the SDB pin. + + audio-gain-db: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: Audio gain selection for external analog modulation input. + enum: [0, 3, 6, 9, 12, 15, 18, 21] + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[1-9]$": + type: object + $ref: common.yaml# + + properties: + reg: + description: Index of the LED. + minimum: 1 + maximum: 9 + + led-max-microamp: + description: + Note that a driver will take the lowest of all LED limits + since the chip has a single global setting. The lowest value + will be chosen due to the PWM specificity, where lower + brightness is achieved by reducing the duty-cycle of pulses + and not the current, which will always have its peak value + equal to led-max-microamp. + +allOf: + - if: + properties: + compatible: + contains: + enum: + - issi,is31fl3190 + - issi,is31fl3191 + - issi,is31fl3193 + - si-en,sn3190 + - si-en,sn3191 + - si-en,sn3193 + then: + properties: + reg: + enum: [0x68, 0x69, 0x6a, 0x6b] + + audio-gain-db: false + + patternProperties: + "^led@[1-9]$": + properties: + led-max-microamp: + default: 42000 + enum: [5000, 10000, 17500, 30000, 42000] + else: + properties: + reg: + enum: [0x64, 0x65, 0x66, 0x67] + + patternProperties: + "^led@[1-9]$": + properties: + led-max-microamp: + default: 20000 + enum: [5000, 10000, 15000, 20000, 25000, 30000, 35000, 40000] + - if: + properties: + compatible: + contains: + enum: + - issi,is31fl3190 + - issi,is31fl3191 + - si-en,sn3190 + - si-en,sn3191 + then: + patternProperties: + "^led@[1-9]$": + properties: + reg: + maximum: 1 + - if: + properties: + compatible: + contains: + enum: + - issi,is31fl3193 + - si-en,sn3193 + then: + patternProperties: + "^led@[1-9]$": + properties: + reg: + maximum: 3 + - if: + properties: + compatible: + contains: + enum: + - issi,is31fl3196 + - si-en,sn3196 + then: + patternProperties: + "^led@[1-9]$": + properties: + reg: + maximum: 6 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@65 { + compatible = "issi,is31fl3196"; + reg = <0x65>; + #address-cells = <1>; + #size-cells = <0>; + + shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + + led@1 { + reg = <1>; + label = "red:aux"; + led-max-microamp = <10000>; + }; + + led@5 { + reg = <5>; + label = "green:power"; + linux,default-trigger = "default-on"; + }; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml new file mode 100644 index 000000000..bac95a51a --- /dev/null +++ b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: KTD2692 Flash LED Driver from Kinetic Technologies + +maintainers: + - Markuss Broks <markuss.broks@gmail.com> + +description: | + KTD2692 is the ideal power solution for high-power flash LEDs. + It uses ExpressWire single-wire programming for maximum flexibility. + + The ExpressWire interface through CTRL pin can control LED on/off and + enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current, + Flash timeout, LVP(low voltage protection). + + Also, When the AUX pin is pulled high while CTRL pin is high, + LED current will be ramped up to the flash-mode current level. + +properties: + compatible: + const: kinetic,ktd2692 + + ctrl-gpios: + maxItems: 1 + description: Specifier of the GPIO connected to CTRL pin. + + aux-gpios: + maxItems: 1 + description: Specifier of the GPIO connected to CTRL pin. + + vin-supply: + description: LED supply (2.7V to 5.5V). + + led: + type: object + $ref: common.yaml# + description: Properties for the LED. + properties: + function: true + color: true + flash-max-timeout-us: + description: Flash LED maximum timeout. + + led-max-microamp: + maximum: 300000 + description: Minimum Threshold for Timer protection + is defined internally (Maximum 300mA). + + flash-max-microamp: + maximum: 300000 + description: Flash LED maximum current + Formula - I(uA) = 15000000 / Rset. + + additionalProperties: false + +required: + - compatible + - ctrl-gpios + - led + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + ktd2692 { + compatible = "kinetic,ktd2692"; + ctrl-gpios = <&gpc0 1 0>; + aux-gpios = <&gpc0 2 0>; + vin-supply = <&vbat>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <150000>; + led-max-microamp = <25000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/leds-an30259a.txt b/Documentation/devicetree/bindings/leds/leds-an30259a.txt new file mode 100644 index 000000000..cbd833906 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-an30259a.txt @@ -0,0 +1,55 @@ +* Panasonic AN30259A 3-channel LED driver + +The AN30259A is a LED controller capable of driving three LEDs independently. It supports +constant current output and sloping current output modes. The chip is connected over I2C. + +Required properties: + - compatible: Must be "panasonic,an30259a". + - reg: I2C slave address. + - #address-cells: Must be 1. + - #size-cells: Must be 0. + +Each LED is represented as a sub-node of the panasonic,an30259a node. + +Required sub-node properties: + - reg: Pin that the LED is connected to. Must be 1, 2, or 3. + +Optional sub-node properties: + - function : + see Documentation/devicetree/bindings/leds/common.txt + - color : + see Documentation/devicetree/bindings/leds/common.txt + - label : + see Documentation/devicetree/bindings/leds/common.txt (deprecated) + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +#include <dt-bindings/leds/common.h> + +led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml new file mode 100644 index 000000000..e24b0d15e --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-aw2013.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AWINIC AW2013 3-channel LED Driver + +maintainers: + - Nikita Travkin <nikitos.tr@gmail.com> + +description: | + The AW2013 is a 3-channel LED driver with I2C interface. It can control + LED brightness with PWM output. + +properties: + compatible: + const: awinic,aw2013 + + reg: + maxItems: 1 + + vcc-supply: + description: Regulator providing power to the "VCC" pin. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[0-2]$": + type: object + $ref: common.yaml# + + properties: + reg: + description: Index of the LED. + minimum: 0 + maximum: 2 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8916_l17>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml new file mode 100644 index 000000000..52252fb6b --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom's BCM63138 LEDs controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: | + This LEDs controller was first used on BCM63138 and later reused on BCM4908, + BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs. + + It supports up to 32 LEDs that can be connected parallelly or serially. It + also includes limited support for hardware blinking. + + Binding serially connected LEDs isn't documented yet. + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm4908-leds + - brcm,bcm6848-leds + - brcm,bcm6858-leds + - brcm,bcm63148-leds + - brcm,bcm63381-leds + - brcm,bcm68360-leds + - const: brcm,bcm63138-leds + - const: brcm,bcm63138-leds + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[a-f0-9]+$": + type: object + + $ref: common.yaml# + + properties: + reg: + maxItems: 1 + description: LED pin number + + active-low: + type: boolean + description: Makes LED active low + + required: + - reg + + unevaluatedProperties: false + +required: + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + leds@ff800800 { + compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; + reg = <0xff800800 0xdc>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0x0>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + }; + + led@3 { + reg = <0x3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + active-low; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml new file mode 100644 index 000000000..51cc0d82c --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml @@ -0,0 +1,404 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LEDs connected to Broadcom BCM6328 controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + +description: | + This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. + In these SoCs it's possible to control LEDs both as GPIOs or by hardware. + However, on some devices there are Serial LEDs (LEDs connected to a 74x164 + controller), which can either be controlled by software (exporting the 74x164 + as spi-gpio. See + Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware + using this driver. + Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and + exporting the 74x164 as spi-gpio prevents those LEDs to be hardware + controlled, so the only chance to keep them working is by using this driver. + + BCM6328 LED controller has a HWDIS register, which controls whether a LED + should be controlled by a hardware signal instead of the MODE register value, + with 0 meaning hardware control enabled and 1 hardware control disabled. This + is usually 1:1 for hardware to LED signals, but through the activity/link + registers you have some limited control over rerouting the LEDs (as + explained later in brcm,link-signal-sources). Even if a LED is hardware + controlled you are still able to make it blink or light it up if it isn't, + but you can't turn it off if the hardware decides to light it up. For this + reason, hardware controlled LEDs aren't registered as LED class devices. + + Each LED is represented as a sub-node of the brcm,bcm6328-leds device. + +properties: + compatible: + const: brcm,bcm6328-leds + + reg: + maxItems: 1 + + brcm,serial-leds: + type: boolean + description: Enables Serial LEDs. + + brcm,serial-mux: + type: boolean + description: Enables Serial LEDs multiplexing. + + brcm,serial-clk-low: + type: boolean + description: Makes clock signal active low. + + brcm,serial-dat-low: + type: boolean + description: Makes data signal active low. + + brcm,serial-shift-inv: + type: boolean + description: Inverts Serial LEDs shift direction. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "@[a-f0-9]+$": + type: object + + $ref: common.yaml# + + properties: + reg: + items: + - maximum: 23 + description: LED pin number (only LEDs 0 to 23 are valid). + + active-low: + type: boolean + description: Makes LED active low. + + brcm,hardware-controlled: + type: boolean + description: Makes this LED hardware controlled. + + brcm,link-signal-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + description: > + An array of hardware link signal sources. Up to four link hardware + signals can get muxed into these LEDs. Only valid for LEDs 0 to 7, + where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to + 7 may be muxed to LEDs 4 to 7. A signal can be muxed to more than one + LED, and one LED can have more than one source signal. + + brcm,activity-signal-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + description: > + An array of hardware activity signal sources. Up to four activity + hardware signals can get muxed into these LEDs. Only valid for LEDs 0 + to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and + signals 4 to 7 may be muxed to LEDs 4 to 7. A signal can be muxed to + more than one LED, and one LED can have more than one source signal. + + required: + - reg + + unevaluatedProperties: false + +required: + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + /* BCM6328 with 4 EPHY LEDs */ + led-controller@10000800 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10000800 0x24>; + + alarm_red@2 { + reg = <2>; + active-low; + label = "red:alarm"; + }; + + inet_green@3 { + reg = <3>; + active-low; + label = "green:inet"; + }; + + power_green@4 { + reg = <4>; + active-low; + label = "green:power"; + default-state = "on"; + }; + + ephy0_spd@17 { + reg = <17>; + brcm,hardware-controlled; + }; + + ephy1_spd@18 { + reg = <18>; + brcm,hardware-controlled; + }; + + ephy2_spd@19 { + reg = <19>; + brcm,hardware-controlled; + }; + + ephy3_spd@20 { + reg = <20>; + brcm,hardware-controlled; + }; + }; + - | + /* BCM63268 with Serial/GPHY0 LEDs */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + brcm,serial-leds; + brcm,serial-dat-low; + brcm,serial-shift-inv; + + gphy0_spd0@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + }; + + gphy0_spd1@1 { + reg = <1>; + brcm,hardware-controlled; + brcm,link-signal-sources = <1>; + }; + + inet_red@2 { + reg = <2>; + active-low; + label = "red:inet"; + }; + + dsl_green@3 { + reg = <3>; + active-low; + label = "green:dsl"; + }; + + usb_green@4 { + reg = <4>; + active-low; + label = "green:usb"; + }; + + wps_green@7 { + reg = <7>; + active-low; + label = "green:wps"; + }; + + inet_green@8 { + reg = <8>; + active-low; + label = "green:inet"; + }; + + ephy0_act@9 { + reg = <9>; + brcm,hardware-controlled; + }; + + ephy1_act@10 { + reg = <10>; + brcm,hardware-controlled; + }; + + ephy2_act@11 { + reg = <11>; + brcm,hardware-controlled; + }; + + gphy0_act@12 { + reg = <12>; + brcm,hardware-controlled; + }; + + ephy0_spd@13 { + reg = <13>; + brcm,hardware-controlled; + }; + + ephy1_spd@14 { + reg = <14>; + brcm,hardware-controlled; + }; + + ephy2_spd@15 { + reg = <15>; + brcm,hardware-controlled; + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + - | + /* BCM6362 with 1 LED for each EPHY */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + brcm,activity-signal-sources = <0>; + /* USB link/activity routed to USB LED */ + }; + + inet@1 { + reg = <1>; + brcm,hardware-controlled; + brcm,activity-signal-sources = <1>; + /* INET activity routed to INET LED */ + }; + + ephy0@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + /* EPHY0 link routed to EPHY0 LED */ + }; + + ephy1@5 { + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + /* EPHY1 link routed to EPHY1 LED */ + }; + + ephy2@6 { + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + /* EPHY2 link routed to EPHY2 LED */ + }; + + ephy3@7 { + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + /* EPHY3 link routed to EPHY3 LED */ + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + - | + /* BCM6362 with 1 LED for all EPHYs */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0 1>; + brcm,activity-signal-sources = <0 1>; + /* USB/INET link/activity routed to USB LED */ + }; + + ephy@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4 5 6 7>; + /* EPHY0/1/2/3 link routed to EPHY0 LED */ + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + - | + /* BCM6362 with EPHY LEDs swapped */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + brcm,activity-signal-sources = <0 1>; + /* USB link/act and INET act routed to USB LED */ + }; + + ephy0@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + /* EPHY3 link routed to EPHY0 LED */ + }; + + ephy1@5 { + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + /* EPHY2 link routed to EPHY1 LED */ + }; + + ephy2@6 { + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + /* EPHY1 link routed to EPHY2 LED */ + }; + + ephy3@7 { + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + /* EPHY0 link routed to EPHY3 LED */ + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt new file mode 100644 index 000000000..6e51c6b91 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt @@ -0,0 +1,145 @@ +LEDs connected to Broadcom BCM6358 controller + +This controller is present on BCM6358 and BCM6368. +In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller), +which can either be controlled by software (exporting the 74x164 as spi-gpio. +See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or +by hardware using this driver. + +Required properties: + - compatible : should be "brcm,bcm6358-leds". + - #address-cells : must be 1. + - #size-cells : must be 0. + - reg : BCM6358 LED controller address and size. + +Optional properties: + - brcm,clk-div : SCK signal divider. Possible values are 1, 2, 4 and 8. + Default : 1 + - brcm,clk-dat-low : Boolean, makes clock and data signals active low. + Default : false + +Each LED is represented as a sub-node of the brcm,bcm6358-leds device. + +LED sub-node required properties: + - reg : LED pin number (only LEDs 0 to 31 are valid). + +LED sub-node optional properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - active-low : Boolean, makes LED active low. + Default : false + - default-state : see + Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : see + Documentation/devicetree/bindings/leds/common.txt + +Examples: +Scenario 1 : BCM6358 + leds0: led-controller@fffe00d0 { + compatible = "brcm,bcm6358-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfffe00d0 0x8>; + + alarm_white { + reg = <0>; + active-low; + label = "white:alarm"; + }; + tv_white { + reg = <2>; + active-low; + label = "white:tv"; + }; + tel_white { + reg = <3>; + active-low; + label = "white:tel"; + }; + adsl_white { + reg = <4>; + active-low; + label = "white:adsl"; + }; + }; + +Scenario 2 : BCM6368 + leds0: led-controller@100000d0 { + compatible = "brcm,bcm6358-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x100000d0 0x8>; + brcm,pol-low; + brcm,clk-div = <4>; + + power_red { + reg = <0>; + active-low; + label = "red:power"; + }; + power_green { + reg = <1>; + active-low; + label = "green:power"; + default-state = "on"; + }; + power_blue { + reg = <2>; + label = "blue:power"; + }; + broadband_red { + reg = <3>; + active-low; + label = "red:broadband"; + }; + broadband_green { + reg = <4>; + label = "green:broadband"; + }; + broadband_blue { + reg = <5>; + active-low; + label = "blue:broadband"; + }; + wireless_red { + reg = <6>; + active-low; + label = "red:wireless"; + }; + wireless_green { + reg = <7>; + active-low; + label = "green:wireless"; + }; + wireless_blue { + reg = <8>; + label = "blue:wireless"; + }; + phone_red { + reg = <9>; + active-low; + label = "red:phone"; + }; + phone_green { + reg = <10>; + active-low; + label = "green:phone"; + }; + phone_blue { + reg = <11>; + label = "blue:phone"; + }; + upgrading_red { + reg = <12>; + active-low; + label = "red:upgrading"; + }; + upgrading_green { + reg = <13>; + active-low; + label = "green:upgrading"; + }; + upgrading_blue { + reg = <14>; + label = "blue:upgrading"; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml new file mode 100644 index 000000000..31840e33d --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-class-multicolor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for the multicolor LED class. + +maintainers: + - Andrew Davis <afd@ti.com> + +description: | + Bindings for multi color LEDs show how to describe current outputs of + either integrated multi-color LED elements (like RGB, RGBW, RGBWA-UV + etc.) or standalone LEDs, to achieve logically grouped multi-color LED + modules. This is achieved by adding multi-led nodes layer to the + monochrome LED bindings. + The nodes and properties defined in this document are unique to the multicolor + LED class. Common LED nodes and properties are inherited from the common.yaml + within this documentation directory. + +properties: + $nodename: + pattern: "^multi-led(@[0-9a-f])?$" + + color: + description: | + For multicolor LED support this property should be defined as either + LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in + include/linux/leds/common.h. + enum: [ 8, 9 ] + +required: + - color + +allOf: + - $ref: "common.yaml#" + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/leds/leds-cpcap.txt b/Documentation/devicetree/bindings/leds/leds-cpcap.txt new file mode 100644 index 000000000..ebf7cdc7f --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-cpcap.txt @@ -0,0 +1,29 @@ +Motorola CPCAP PMIC LEDs +------------------------ + +This module is part of the CPCAP. For more details about the whole +chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt. + +Requires node properties: +- compatible: should be one of + * "motorola,cpcap-led-mdl" (Main Display Lighting) + * "motorola,cpcap-led-kl" (Keyboard Lighting) + * "motorola,cpcap-led-adl" (Aux Display Lighting) + * "motorola,cpcap-led-red" (Red Triode) + * "motorola,cpcap-led-green" (Green Triode) + * "motorola,cpcap-led-blue" (Blue Triode) + * "motorola,cpcap-led-cf" (Camera Flash) + * "motorola,cpcap-led-bt" (Bluetooth) + * "motorola,cpcap-led-cp" (Camera Privacy LED) +- label: see Documentation/devicetree/bindings/leds/common.txt +- vdd-supply: A phandle to the regulator powering the LED + +Example: + +&cpcap { + cpcap_led_red: red-led { + compatible = "motorola,cpcap-led-red"; + label = "cpcap:red"; + vdd-supply = <&sw5>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-cr0014114.txt b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt new file mode 100644 index 000000000..f8de7516a --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt @@ -0,0 +1,66 @@ +Crane Merchandising System - cr0014114 LED driver +------------------------------------------------- + +This LED Board is widely used in vending machines produced +by Crane Merchandising Systems. + +Required properties: +- compatible: "crane,cr0014114" + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. In particular, "reg" and "spi-max-frequency" properties must be given. + +LED sub-node properties: +- function : + see Documentation/devicetree/bindings/leds/common.txt +- color : + see Documentation/devicetree/bindings/leds/common.txt +- label : + see Documentation/devicetree/bindings/leds/common.txt (deprecated) +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Example +------- + +#include <dt-bindings/leds/common.h> + +led-controller@0 { + compatible = "crane,cr0014114"; + reg = <0>; + spi-max-frequency = <50000>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = "coin"; + color = <LED_COLOR_ID_RED>; + }; + led@1 { + reg = <1>; + function = "coin"; + color = <LED_COLOR_ID_GREEN>; + }; + led@2 { + reg = <2>; + function = "coin"; + color = <LED_COLOR_ID_BLUE>; + }; + led@3 { + reg = <3>; + function = "bill"; + color = <LED_COLOR_ID_RED>; + }; + led@4 { + reg = <4>; + function = "bill"; + color = <LED_COLOR_ID_GREEN>; + }; + led@5 { + reg = <5>; + function = "bill"; + color = <LED_COLOR_ID_BLUE>; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/leds/leds-el15203000.txt b/Documentation/devicetree/bindings/leds/leds-el15203000.txt new file mode 100644 index 000000000..182f0035e --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-el15203000.txt @@ -0,0 +1,69 @@ +Crane Merchandising System - EL15203000 LED driver +-------------------------------------------------- + +This LED Board (aka RED LEDs board) is widely used in +coffee vending machines produced by Crane Merchandising Systems. +The board manages 3 LEDs and supports predefined blinking patterns +for specific leds. + +Vending area LED encoded with symbol 'V' (hex code 0x56). +Doesn't have any hardware blinking pattern. + +Screen light tube LED which surrounds vending machine screen and +encoded with symbol 'S' (hex code 0x53). Supports blinking breathing pattern. + +Water Pipe LED encoded with symbol 'P' (hex code 0x50) and +actually consists of 5 LEDs that exposed by protocol like one LED. +Supports next patterns: +- cascade pattern +- inversed cascade pattern +- bounce pattern +- inversed bounce pattern + +Required properties: +- compatible : "crane,el15203000" +- #address-cells : must be 1 +- #size-cells : must be 0 + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. In particular, "reg" and "spi-max-frequency" properties must be given. + +Optional LED sub-node properties: +- function: + see Documentation/devicetree/bindings/leds/common.txt +- color: + see Documentation/devicetree/bindings/leds/common.txt + +Example +------- + +#include <dt-bindings/leds/common.h> + +led-controller@0 { + compatible = "crane,el15203000"; + reg = <0>; + spi-max-frequency = <50000>; + #address-cells = <1>; + #size-cells = <0>; + + /* water pipe */ + led@50 { + reg = <0x50>; + function = "pipe"; + color = <LED_COLOR_ID_RED>; + }; + + /* screen frame */ + led@53 { + reg = <0x53>; + function = "screen"; + color = <LED_COLOR_ID_RED>; + }; + + /* vending area */ + led@56 { + reg = <0x56>; + function = "vend"; + color = <LED_COLOR_ID_RED>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml new file mode 100644 index 000000000..7ad2baeda --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LEDs connected to GPIO lines + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: + Each LED is represented as a sub-node of the gpio-leds device. Each + node's name represents the name of the corresponding LED. + +properties: + compatible: + const: gpio-leds + +patternProperties: + # The first form is preferred, but fall back to just 'led' anywhere in the + # node name to at least catch some child nodes. + "(^led-[0-9a-f]$|led)": + type: object + + $ref: common.yaml# + + properties: + gpios: + maxItems: 1 + + retain-state-suspended: + description: + The suspend state can be retained.Such as charge-led gpio. + type: boolean + + retain-state-shutdown: + description: + Retain the state of the LED on shutdown. Useful in BMC systems, for + example when the BMC is rebooted while the host remains up. + type: boolean + + required: + - gpios + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + leds { + compatible = "gpio-leds"; + led-0 { + gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + function = LED_FUNCTION_DISK; + }; + + led-1 { + gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; + /* Keep LED on if BIOS detected hardware fault */ + default-state = "keep"; + function = LED_FUNCTION_FAULT; + }; + }; + + run-control { + compatible = "gpio-leds"; + led-0 { + gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + }; + led-1 { + gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt new file mode 100644 index 000000000..926c21179 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt @@ -0,0 +1,52 @@ +Binding for ISSI IS31FL32xx and Si-En SN32xx LED Drivers + +The IS31FL32xx/SN32xx family of LED drivers are I2C devices with multiple +constant-current channels, each with independent 256-level PWM control. +Each LED is represented as a sub-node of the device. + +Required properties: +- compatible: one of + issi,is31fl3236 + issi,is31fl3235 + issi,is31fl3218 + issi,is31fl3216 + si-en,sn3218 + si-en,sn3216 +- reg: I2C slave address +- address-cells : must be 1 +- size-cells : must be 0 + +LED sub-node properties: +- reg : LED channel number (1..N) +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + + +Example: + +is31fl3236: led-controller@3c { + compatible = "issi,is31fl3236"; + reg = <0x3c>; + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + label = "EB:blue:usr0"; + }; + led@2 { + reg = <2>; + label = "EB:blue:usr1"; + }; + ... + led@36 { + reg = <36>; + label = "EB:blue:usr35"; + }; +}; + +For more product information please see the links below: +http://www.issi.com/US/product-analog-fxled-driver.shtml +http://www.si-en.com/product.asp?parentid=890 diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml new file mode 100644 index 000000000..f8d7963c3 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-lgm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Lightning Mountain (LGM) SoC LED Serial Shift Output (SSO) Controller driver + +maintainers: + - Zhu, Yi Xin <Yixin.zhu@intel.com> + - Amireddy Mallikarjuna reddy <mallikarjunax.reddy@intel.com> + +properties: + compatible: + const: intel,lgm-ssoled + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: sso + - const: fpid + + gpio-controller: true + + '#gpio-cells': + const: 2 + + ngpios: + minimum: 0 + maximum: 32 + description: + Number of GPIOs this controller provides. + + intel,sso-update-rate-hz: + description: + Blink frequency for SOUTs in Hz. + + led-controller: + type: object + description: + This sub-node must contain a sub-node for each leds. + + additionalProperties: false + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "^led@[0-2]$": + type: object + + properties: + reg: + description: Index of the LED. + minimum: 0 + maximum: 2 + + intel,sso-hw-trigger: + type: boolean + description: This property indicates Hardware driven/control LED. + + intel,sso-hw-blink: + type: boolean + description: This property indicates Enable LED blink by Hardware. + + intel,sso-blink-rate-hz: + description: LED HW blink frequency. + + retain-state-suspended: + type: boolean + description: The suspend state of LED can be retained. + + retain-state-shutdown: + type: boolean + description: Retain the state of the LED on shutdown. + +required: + - compatible + - reg + - clocks + - clock-names + - "#gpio-cells" + - gpio-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/intel,lgm-clk.h> + #include <dt-bindings/leds/common.h> + + ssogpio: ssogpio@e0d40000 { + compatible = "intel,lgm-ssoled"; + reg = <0xE0D40000 0x2E4>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ledc>; + clocks = <&cgu0 LGM_GCLK_LEDC0>, <&afeclk>; + clock-names = "sso", "fpid"; + intel,sso-update-rate-hz = <250000>; + + led-controller { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = "gphy"; + color = <LED_COLOR_ID_GREEN>; + led-gpio = <&ssogpio 0 0>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + led-gpio = <&ssogpio 23 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt new file mode 100644 index 000000000..097490a5f --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt @@ -0,0 +1,105 @@ +* Texas Instruments - lm3532 White LED driver with ambient light sensing +capability. + +The LM3532 provides the 3 high-voltage, low-side current sinks. The device is +programmable over an I2C-compatible interface and has independent +current control for all three channels. The adaptive current regulation +method allows for different LED currents in each current sink thus allowing +for a wide variety of backlight and keypad applications. + +The main features of the LM3532 include dual ambient light sensor inputs +each with 32 internal voltage setting resistors, 8-bit logarithmic and linear +brightness control, dual external PWM brightness control inputs, and up to +1000:1 dimming ratio with programmable fade in and fade out settings. + +Required properties: + - compatible : "ti,lm3532" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : gpio pin to enable (active high)/disable the device. + - ramp-up-us - The Run time ramp rates/step are from one current + set-point to another after the device has reached its + initial target set point from turn-on + - ramp-down-us - The Run time ramp rates/step are from one current + set-point to another after the device has reached its + initial target set point from turn-on + Range for ramp settings: 8us - 65536us + +Optional properties if ALS mode is used: + - ti,als-vmin - Minimum ALS voltage defined in Volts + - ti,als-vmax - Maximum ALS voltage defined in Volts + Per the data sheet the max ALS voltage is 2V and the min is 0V + + - ti,als1-imp-sel - ALS1 impedance resistor selection in Ohms + - ti,als2-imp-sel - ALS2 impedance resistor selection in Ohms + Range for impedance select: 37000 Ohms - 1190 Ohms + Values above 37kohms will be set to the "High Impedance" setting + + - ti,als-avrg-time-us - Determines the length of time the device needs to + average the two ALS inputs. This is only used if + the input mode is LM3532_ALS_INPUT_AVRG. + Range: 17920us - 2293760us + - ti,als-input-mode - Determines how the device uses the attached ALS + devices. + 0x00 - ALS1 and ALS2 input average + 0x01 - ALS1 Input + 0x02 - ALS2 Input + 0x03 - Max of ALS1 and ALS2 + +Required child properties: + - reg : Indicates control bank the LED string is controlled by + - led-sources : see Documentation/devicetree/bindings/leds/common.txt + - ti,led-mode : Defines if the LED strings are manually controlled or + if the LED strings are controlled by the ALS. + 0x00 - LED strings are I2C controlled via full scale + brightness control register + 0x01 - LED strings are ALS controlled + +Optional LED child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + - led-max-microamp : Defines the full scale current value for each control + bank. The range is from 5000uA-29800uA in increments + of 800uA. + +Example: +led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + ramp-up-us = <1024>; + ramp-down-us = <65536>; + + ti,als-vmin = <0>; + ti,als-vmax = <2000>; + ti,als1-imp-sel = <4110>; + ti,als2-imp-sel = <2180>; + ti,als-avrg-time-us = <17920>; + ti,als-input-mode = <0x00>; + + led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <1>; + led-max-microamp = <21800>; + label = ":backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; + }; +}; + +For more product information please see the links below: +https://www.ti.com/product/LM3532 diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt new file mode 100644 index 000000000..17e940025 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt @@ -0,0 +1,51 @@ +* Texas Instruments - lm3601x Single-LED Flash Driver + +The LM3601X are ultra-small LED flash drivers that +provide a high level of adjustability. + +Required properties: + - compatible : Can be one of the following + "ti,lm36010" + "ti,lm36011" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Required child properties: + - reg : 0 - Indicates a IR mode + 1 - Indicates a Torch (white LED) mode + +Required properties for flash LED child nodes: + See Documentation/devicetree/bindings/leds/common.txt + - flash-max-microamp : Range from 11mA - 1.5A + - flash-max-timeout-us : Range from 40ms - 1600ms + - led-max-microamp : Range from 2.4mA - 376mA + +Optional child properties: + - function : see Documentation/devicetree/bindings/leds/common.txt + - color : see Documentation/devicetree/bindings/leds/common.txt + - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated) + +Example: + +#include <dt-bindings/leds/common.h> + +led-controller@64 { + compatible = "ti,lm36010"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x64>; + + led@0 { + reg = <1>; + function = LED_FUNCTION_TORCH; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <376000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1600000>; + }; +} + +For more product information please see the links below: +https://www.ti.com/product/LM36010 +https://www.ti.com/product/LM36011 diff --git a/Documentation/devicetree/bindings/leds/leds-lm36274.txt b/Documentation/devicetree/bindings/leds/leds-lm36274.txt new file mode 100644 index 000000000..de6f4931f --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm36274.txt @@ -0,0 +1,85 @@ +* Texas Instruments LM36274 4-Channel LCD Backlight Driver w/Integrated Bias + +The LM36274 is an integrated four-channel WLED driver and LCD bias supply. +The backlight boost provides the power to bias four parallel LED strings with +up to 29V total output voltage. The 11-bit LED current is programmable via +the I2C bus and/or controlled via a logic level PWM input from 60 uA to 30 mA. + +Parent device properties are documented in +Documentation/devicetree/bindings/mfd/ti-lmu.txt + +Regulator properties are documented in +Documentation/devicetree/bindings/regulator/lm363x-regulator.txt + +Required backlight properties: + - compatible: + "ti,lm36274-backlight" + - reg : 0 + - #address-cells : 1 + - #size-cells : 0 + - led-sources : Indicates which LED strings will be enabled. + Values from 0-3, sources is 0 based so strings will be + source value + 1. + +Optional backlight properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is +controlled by control bank B. + +lm36274@11 { + compatible = "ti,lm36274"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; + + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm363x-regulator"; + + enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>, + <&pioC 1 GPIO_ACTIVE_HIGH>; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-always-on; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + }; + + backlight { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm36274-backlight"; + + led@0 { + reg = <0>; + led-sources = <0 2>; + label = "white:backlight_cluster"; + linux,default-trigger = "backlight"; + }; + }; +}; + +For more product information please see the link below: +https://www.ti.com/lit/ds/symlink/lm36274.pdf diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt new file mode 100644 index 000000000..b1103d961 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt @@ -0,0 +1,65 @@ +* Texas Instruments - LM3692x Highly Efficient White LED Driver + +The LM3692x is an ultra-compact, highly efficient, +white-LED driver designed for LCD display backlighting. + +The main difference between the LM36922 and LM36923 is the number of +LED strings it supports. The LM36922 supports two strings while the LM36923 +supports three strings. + +Required properties: + - compatible: + "ti,lm36922" + "ti,lm36923" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : gpio pin to enable/disable the device. + - vled-supply : LED supply + - ti,ovp-microvolt: Overvoltage protection in + micro-volt, can be 17000000, 21000000, 25000000 or + 29000000. If ti,ovp-microvolt is not specified it + defaults to 29000000. + +Required child properties: + - reg : 0 - Will enable all LED sync paths + 1 - Will enable the LED1 sync + 2 - Will enable the LED2 sync + 3 - Will enable the LED3 sync (LM36923 only) + +Optional child properties: + - function : see Documentation/devicetree/bindings/leds/common.txt + - color : see Documentation/devicetree/bindings/leds/common.txt + - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated) + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + - led-max-microamp : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +#include <dt-bindings/leds/common.h> + +led-controller@36 { + compatible = "ti,lm3692x"; + reg = <0x36>; + #address-cells = <1>; + #size-cells = <0>; + + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + ti,ovp-microvolt = <29000000>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + linux,default-trigger = "backlight"; + led-max-microamp = <20000>; + }; +} + +For more product information please see the link below: +https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt new file mode 100644 index 000000000..221b37b60 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt @@ -0,0 +1,73 @@ +* Texas Instruments - LM3697 Highly Efficient White LED Driver + +The LM3697 11-bit LED driver provides high- +performance backlight dimming for 1, 2, or 3 series +LED strings while delivering up to 90% efficiency. + +This device is suitable for display and keypad lighting + +Required properties: + - compatible: + "ti,lm3697" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : GPIO pin to enable/disable the device + - vled-supply : LED supply + +Required child properties: + - reg : 0 - LED is Controlled by bank A + 1 - LED is Controlled by bank B + - led-sources : Indicates which HVLED string is associated to which + control bank. This is a zero based property so + HVLED1 = 0, HVLED2 = 1, HVLED3 = 2. + Additional information is contained + in Documentation/devicetree/bindings/leds/common.txt + +Optional child properties: + - ti,brightness-resolution - see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - ramp-up-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - ramp-down-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is +controlled by control bank B. + +led-controller@36 { + compatible = "ti,lm3697"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x36>; + + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + led-sources = <0 2>; + ti,brightness-resolution = <2047>; + ramp-up-us = <5000>; + ramp-down-us = <1000>; + label = "white:first_backlight_cluster"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,brightness-resolution = <255>; + ramp-up-us = <500>; + ramp-down-us = <1000>; + label = "white:second_backlight_cluster"; + linux,default-trigger = "backlight"; + }; +} + +For more product information please see the link below: +https://www.ti.com/lit/ds/symlink/lm3697.pdf diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml new file mode 100644 index 000000000..63da38074 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-lp50xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LED driver for LP50XX RGB LED from Texas Instruments. + +maintainers: + - Andrew Davis <afd@ti.com> + +description: | + The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into + a LED group or control them individually. + + The difference in these RGB LED drivers is the number of supported RGB + modules. + + For more product information please see the link below: + https://www.ti.com/lit/ds/symlink/lp5012.pdf + https://www.ti.com/lit/ds/symlink/lp5024.pdf + https://www.ti.com/lit/ds/symlink/lp5036.pdf + +properties: + compatible: + enum: + - ti,lp5009 + - ti,lp5012 + - ti,lp5018 + - ti,lp5024 + - ti,lp5030 + - ti,lp5036 + + reg: + maxItems: 1 + description: + I2C slave address + lp5009/12 - 0x14, 0x15, 0x16, 0x17 + lp5018/24 - 0x28, 0x29, 0x2a, 0x2b + lp5030/36 - 0x30, 0x31, 0x32, 0x33 + + enable-gpios: + maxItems: 1 + description: GPIO pin to enable/disable the device. + + vled-supply: + description: LED supply. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^multi-led@[0-9a-f]$': + type: object + $ref: leds-class-multicolor.yaml# + unevaluatedProperties: false + + properties: + reg: + minItems: 1 + maxItems: 12 + description: + This property denotes the LED module number(s) that is used on the + for the child node. The LED modules can either be used stand alone + or grouped into a module bank. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "^led@[0-9a-f]+$": + type: object + $ref: common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@14 { + compatible = "ti,lp5009"; + reg = <0x14>; + #address-cells = <1>; + #size-cells = <0>; + enable-gpios = <&gpio1 16>; + + multi-led@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_CHARGING; + + led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <0x1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <0x2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + multi-led@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>, <0x4>, <0x5>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STANDBY; + + led@3 { + reg = <0x3>; + color = <LED_COLOR_ID_RED>; + }; + + led@4 { + reg = <0x4>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + reg = <0x5>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml new file mode 100644 index 000000000..7ec676e53 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-lp55xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI/National Semiconductor LP55xx and LP8501 LED Drivers + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: | + Bindings for the TI/National Semiconductor LP55xx and LP8501 multi channel + LED Drivers. + + For more product information please see the link below: + https://www.ti.com/lit/gpn/lp5521 + https://www.ti.com/lit/gpn/lp5523 + https://www.ti.com/lit/gpn/lp55231 + https://www.ti.com/lit/gpn/lp5562 + https://www.ti.com/lit/gpn/lp8501 + +properties: + compatible: + enum: + - national,lp5521 + - national,lp5523 + - ti,lp55231 + - ti,lp5562 + - ti,lp8501 + + reg: + maxItems: 1 + description: I2C slave address + + clock-mode: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Input clock mode + enum: + - 0 # automode + - 1 # internal + - 2 # external + + enable-gpio: + maxItems: 1 + description: | + GPIO attached to the chip's enable pin + + pwr-sel: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + LP8501 specific property. Power selection for output channels. + enum: + - 0 # D1~9 are connected to VDD + - 1 # D1~6 with VDD, D7~9 with VOUT + - 2 # D1~6 with VOUT, D7~9 with VDD + - 3 # D1~9 are connected to VOUT + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "(^led@[0-9a-f]$|led)": + type: object + $ref: common.yaml# + properties: + led-cur: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Current setting at each LED channel (mA x10, 0 if LED is not connected) + minimum: 0 + maximum: 255 + + max-cur: + $ref: /schemas/types.yaml#/definitions/uint8 + description: Maximun current at each LED channel. + + reg: + description: | + Output channel for the LED. This is zero based channel identifier and + the data sheet is a one based channel identifier. + reg value to output to LED output number + enum: + - 0 # LED output D1 + - 1 # LED output D2 + - 2 # LED output D3 + - 3 # LED output D4 + - 4 # LED output D5 + - 5 # LED output D6 + - 6 # LED output D7 + - 7 # LED output D8 + - 8 # LED output D9 + + chan-name: + $ref: /schemas/types.yaml#/definitions/string + description: name of channel + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@32 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lp8501"; + reg = <0x32>; + clock-mode = /bits/ 8 <2>; + pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ + + led@0 { + reg = <0>; + chan-name = "d1"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@1 { + reg = <1>; + chan-name = "d2"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@2 { + reg = <2>; + chan-name = "d3"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@3 { + reg = <3>; + chan-name = "d4"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@4 { + reg = <4>; + chan-name = "d5"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@5 { + reg = <5>; + chan-name = "d6"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@6 { + reg = <6>; + chan-name = "d7"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@7 { + reg = <7>; + chan-name = "d8"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@8 { + reg = <8>; + chan-name = "d9"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + }; + + led-controller@33 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "national,lp5523"; + reg = <0x33>; + clock-mode = /bits/ 8 <0>; + + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STANDBY; + linux,default-trigger = "heartbeat"; + + led@0 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x0>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@1 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x6>; + color = <LED_COLOR_ID_RED>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt new file mode 100644 index 000000000..8bb25749a --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt @@ -0,0 +1,50 @@ +* Texas Instruments - lp8860 4-Channel LED Driver + +The LP8860-Q1 is an high-efficiency LED +driver with boost controller. It has 4 high-precision +current sinks that can be controlled by a PWM input +signal, a SPI/I2C master, or both. + +Required properties: + - compatible : + "ti,lp8860" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : gpio pin to enable (active high)/disable the device. + - vled-supply : LED supply + +Required child properties: + - reg : 0 + +Optional child properties: + - function : see Documentation/devicetree/bindings/leds/common.txt + - color : see Documentation/devicetree/bindings/leds/common.txt + - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated) + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +#include <dt-bindings/leds/common.h> + +led-controller@2d { + compatible = "ti,lp8860"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2d>; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + linux,default-trigger = "backlight"; + }; +} + +For more product information please see the link below: +https://www.ti.com/product/lp8860-q1 diff --git a/Documentation/devicetree/bindings/leds/leds-lt3593.txt b/Documentation/devicetree/bindings/leds/leds-lt3593.txt new file mode 100644 index 000000000..24eccdaa6 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lt3593.txt @@ -0,0 +1,37 @@ +Bindings for Linear Technologies LT3593 LED controller + +Required properties: +- compatible: Should be "lltc,lt3593". +- lltc,ctrl-gpios: A handle to the GPIO that is connected to the 'CTRL' + pin of the chip. + +The hardware supports only one LED. The properties of this LED are +configured in a sub-node in the device node. + +Optional sub-node properties: +- function: See Documentation/devicetree/bindings/leds/common.txt +- color: See Documentation/devicetree/bindings/leds/common.txt +- label: A label for the LED. If none is given, the LED will be + named "lt3595::" (deprecated) +- linux,default-trigger: The default trigger for the LED. + See Documentation/devicetree/bindings/leds/common.txt +- default-state: The initial state of the LED. + See Documentation/devicetree/bindings/leds/common.txt + +If multiple chips of this type are found in a design, each one needs to +be handled by its own device node. + +Example: + +#include <dt-bindings/leds/common.h> + +led-controller { + compatible = "lltc,lt3593"; + lltc,ctrl-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + + led { + function = LED_FUNCTION_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + default-state = "on"; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml new file mode 100644 index 000000000..c6f96cabd --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-max77650.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LED driver for MAX77650 PMIC from Maxim Integrated. + +maintainers: + - Bartosz Golaszewski <bgolaszewski@baylibre.com> + +description: | + This module is part of the MAX77650 MFD device. For more details + see Documentation/devicetree/bindings/mfd/max77650.yaml. + + The LED controller is represented as a sub-node of the PMIC node on + the device tree. + + This device has three current sinks. + +properties: + compatible: + const: maxim,max77650-led + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[0-2]$": + type: object + description: | + Properties for a single LED. + + properties: + reg: + description: + Index of the LED. + minimum: 0 + maximum: 2 + + label: true + + linux,default-trigger: true + +required: + - compatible + - "#address-cells" + - "#size-cells" +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt new file mode 100644 index 000000000..45bf9f7d8 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt @@ -0,0 +1,60 @@ +Device Tree Bindings for LED support on MT6323 PMIC + +MT6323 LED controller is subfunction provided by MT6323 PMIC, so the LED +controllers are defined as the subnode of the function node provided by MT6323 +PMIC controller that is being defined as one kind of Muti-Function Device (MFD) +using shared bus called PMIC wrapper for each subfunction to access remote +MT6323 PMIC hardware. + +For MT6323 MFD bindings see: +Documentation/devicetree/bindings/mfd/mt6397.txt +For MediaTek PMIC wrapper bindings see: +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt + +Required properties: +- compatible : Must be "mediatek,mt6323-led" +- address-cells : Must be 1 +- size-cells : Must be 0 + +Each led is represented as a child node of the mediatek,mt6323-led that +describes the initial behavior for each LED physically and currently only four +LED child nodes can be supported. + +Required properties for the LED child node: +- reg : LED channel number (0..3) + +Optional properties for the LED child node: +- label : See Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : See Documentation/devicetree/bindings/leds/common.txt +- default-state: See Documentation/devicetree/bindings/leds/common.txt + +Example: + + mt6323: pmic { + compatible = "mediatek,mt6323"; + + ... + + mt6323led: leds { + compatible = "mediatek,mt6323-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "LED0"; + linux,default-trigger = "timer"; + default-state = "on"; + }; + led@1 { + reg = <1>; + label = "LED1"; + default-state = "off"; + }; + led@2 { + reg = <2>; + label = "LED2"; + default-state = "on"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml new file mode 100644 index 000000000..69e579226 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-mt6360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LED driver for MT6360 PMIC from MediaTek Integrated. + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + This module is part of the MT6360 MFD device. + see Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml + Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode, + and 4-channel RGB LED support Register/Flash/Breath Mode + +properties: + compatible: + const: mediatek,mt6360-led + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^(multi-)?led@[0-5]$": + type: object + $ref: common.yaml# + description: + Properties for a single LED. + + properties: + reg: + description: Index of the LED. + enum: + - 0 # LED output ISINK1 + - 1 # LED output ISINK2 + - 2 # LED output ISINK3 + - 3 # LED output ISINKML + - 4 # LED output FLASH1 + - 5 # LED output FLASH2 + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + led-controller { + compatible = "mediatek,mt6360-led"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RGB>; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <150000>; + }; + led@4 { + reg = <4>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + led@5 { + reg = <5>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + }; + + - | + + led-controller { + compatible = "mediatek,mt6360-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + led-max-microamp = <24000>; + }; + led@1 { + reg = <1>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + led-max-microamp = <24000>; + }; + led@2 { + reg = <2>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + led-max-microamp = <24000>; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <150000>; + }; + led@4 { + reg = <4>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + led@5 { + reg = <5>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt new file mode 100644 index 000000000..5ef92a26d --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-netxbig.txt @@ -0,0 +1,92 @@ +Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate +boards (Example: 2Big/5Big Network v2, 2Big NAS). + +Required properties: +- compatible: "lacie,netxbig-leds". +- gpio-ext: Phandle for the gpio-ext bus. + +Optional properties: +- timers: Timer array. Each timer entry is represented by three integers: + Mode (gpio-ext bus), delay_on and delay_off. + +Each LED is represented as a sub-node of the netxbig-leds device. + +Required sub-node properties: +- mode-addr: Mode register address on gpio-ext bus. +- mode-val: Mode to value mapping. Each entry is represented by two integers: + A mode and the corresponding value on the gpio-ext bus. +- bright-addr: Brightness register address on gpio-ext bus. +- max-brightness: Maximum brightness value. + +Optional sub-node properties: +- label: Name for this LED. If omitted, the label is taken from the node name. +- linux,default-trigger: Trigger assigned to the LED. + +Example: + +netxbig-leds { + compatible = "lacie,netxbig-leds"; + + gpio-ext = &gpio_ext; + + timers = <NETXBIG_LED_TIMER1 500 500 + NETXBIG_LED_TIMER2 500 1000>; + + blue-power { + label = "netxbig:blue:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 1 + NETXBIG_LED_TIMER1 3 + NETXBIG_LED_TIMER2 7>; + bright-addr = <1>; + max-brightness = <7>; + }; + red-power { + label = "netxbig:red:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <1>; + max-brightness = <7>; + }; + blue-sata0 { + label = "netxbig:blue:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata0 { + label = "netxbig:red:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + blue-sata1 { + label = "netxbig:blue:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata1 { + label = "netxbig:red:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-ns2.txt b/Documentation/devicetree/bindings/leds/leds-ns2.txt new file mode 100644 index 000000000..9f81258a5 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-ns2.txt @@ -0,0 +1,35 @@ +Binding for dual-GPIO LED found on Network Space v2 (and parents). + +Required properties: +- compatible: "lacie,ns2-leds". + +Each LED is represented as a sub-node of the ns2-leds device. + +Required sub-node properties: +- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification. +- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification. +- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and + the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations + should be given in order to avoid having an unknown mode at driver probe time. + +Optional sub-node properties: +- label: Name for this LED. If omitted, the label is taken from the node name. +- linux,default-trigger: Trigger assigned to the LED. + +Example: + +#include <dt-bindings/leds/leds-ns2.h> + +ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + modes-map = <NS_V2_LED_OFF 0 1 + NS_V2_LED_ON 1 0 + NS_V2_LED_ON 0 0 + NS_V2_LED_SATA 1 1>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt new file mode 100644 index 000000000..f769c52e3 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pca9532.txt @@ -0,0 +1,49 @@ +*NXP - pca9532 PWM LED Driver + +The PCA9532 family is SMBus I/O expander optimized for dimming LEDs. +The PWM support 256 steps. + +Required properties: + - compatible: + "nxp,pca9530" + "nxp,pca9531" + "nxp,pca9532" + "nxp,pca9533" + - reg - I2C slave address + +Each led is represented as a sub-node of the nxp,pca9530. + +Optional sub-node properties: + - label: see Documentation/devicetree/bindings/leds/common.txt + - type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE) + - linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt + - default-state: see Documentation/devicetree/bindings/leds/common.txt + This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>. + +Example: + #include <dt-bindings/leds/leds-pca9532.h> + + leds: pca9530@60 { + compatible = "nxp,pca9530"; + reg = <0x60>; + + red-power { + label = "pca:red:power"; + type = <PCA9532_TYPE_LED>; + }; + green-power { + label = "pca:green:power"; + type = <PCA9532_TYPE_LED>; + }; + kernel-booting { + type = <PCA9532_TYPE_LED>; + default-state = "on"; + }; + sys-stat { + type = <PCA9532_TYPE_LED>; + default-state = "keep"; // don't touch, was set by U-Boot + }; + }; + +For more product information please see the link below: +http://nxp.com/documents/data_sheet/PCA9532.pdf diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt new file mode 100644 index 000000000..817f460f3 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pca955x.txt @@ -0,0 +1,89 @@ +* NXP - pca955x LED driver + +The PCA955x family of chips are I2C LED blinkers whose pins not used +to control LEDs can be used as general purpose I/Os. The GPIO pins can +be input or output, and output pins can also be pulse-width controlled. + +Required properties: +- compatible : should be one of : + "nxp,pca9550" + "nxp,pca9551" + "nxp,pca9552" + "ibm,pca9552" + "nxp,pca9553" +- #address-cells: must be 1 +- #size-cells: must be 0 +- reg: I2C slave address. depends on the model. + +Optional properties: +- gpio-controller: allows pins to be used as GPIOs. +- #gpio-cells: must be 2. +- gpio-line-names: define the names of the GPIO lines + +LED sub-node properties: +- reg : number of LED line. + from 0 to 1 for the pca9550 + from 0 to 7 for the pca9551 + from 0 to 15 for the pca9552 + from 0 to 3 for the pca9553 +- type: (optional) either + PCA955X_TYPE_NONE + PCA955X_TYPE_LED + PCA955X_TYPE_GPIO + see dt-bindings/leds/leds-pca955x.h (default to LED) +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Examples: + +pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15"; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + + led@0 { + label = "red:power"; + linux,default-trigger = "default-on"; + reg = <0>; + type = <PCA955X_TYPE_LED>; + }; + led@1 { + label = "green:power"; + reg = <1>; + type = <PCA955X_TYPE_LED>; + }; + led@2 { + label = "pca9552:yellow"; + reg = <2>; + type = <PCA955X_TYPE_LED>; + }; + led@3 { + label = "pca9552:white"; + reg = <3>; + type = <PCA955X_TYPE_LED>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-pm8058.txt b/Documentation/devicetree/bindings/leds/leds-pm8058.txt new file mode 100644 index 000000000..89584c49a --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pm8058.txt @@ -0,0 +1,67 @@ +Qualcomm PM8058 LED driver + +The Qualcomm PM8058 is a multi-functional device which contains +an LED driver block for up to six LEDs: three normal LEDs, two +"flash" LEDs and one "keypad backlight" LED. The names are +quoted because sometimes these LED drivers are used for wildly +different things than flash or keypad backlight: their names +are more of a suggestion than a hard-wired usecase. + +Hardware-wise the different LEDs support slightly different +output currents. The "flash" LEDs do not need to charge nor +do they support external triggers. They are just powerful LED +drivers. + +The LEDs appear as children to the PM8058 device, with the +proper compatible string. For the PM8058 bindings see: +mfd/qcom-pm8xxx.txt. + +Each LED is represented as a sub-node of the syscon device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: + +Required properties: +- compatible: one of + "qcom,pm8058-led" (for the normal LEDs at 0x131, 0x132 and 0x133) + "qcom,pm8058-keypad-led" (for the "keypad" LED at 0x48) + "qcom,pm8058-flash-led" (for the "flash" LEDs at 0x49 and 0xFB) + +Optional properties: +- label: see Documentation/devicetree/bindings/leds/common.txt +- default-state: see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt + +Example: + +qcom,ssbi@500000 { + pmicintc: pmic@0 { + compatible = "qcom,pm8058"; + led@48 { + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + label = "pm8050:white:keypad"; + default-state = "off"; + }; + led@131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + label = "pm8058:red"; + default-state = "off"; + }; + led@132 { + compatible = "qcom,pm8058-led"; + reg = <0x132>; + label = "pm8058:yellow"; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + led@133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + label = "pm8058:green"; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-powernv.txt b/Documentation/devicetree/bindings/leds/leds-powernv.txt new file mode 100644 index 000000000..66655690f --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-powernv.txt @@ -0,0 +1,26 @@ +Device Tree binding for LEDs on IBM Power Systems +------------------------------------------------- + +Required properties: +- compatible : Should be "ibm,opal-v3-led". +- led-mode : Should be "lightpath" or "guidinglight". + +Each location code of FRU/Enclosure must be expressed in the +form of a sub-node. + +Required properties for the sub nodes: +- led-types : Supported LED types (attention/identify/fault) provided + in the form of string array. + +Example: + +leds { + compatible = "ibm,opal-v3-led"; + led-mode = "lightpath"; + + U78C9.001.RST0027-P1-C1 { + led-types = "identify", "fault"; + }; + ... + ... +}; diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml new file mode 100644 index 000000000..bd6ec04a8 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-pwm-multicolor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Multi-color LEDs connected to PWM + +maintainers: + - Sven Schwermer <sven.schwermer@disruptive-technologies.com> + +description: | + This driver combines several monochrome PWM LEDs into one multi-color + LED using the multicolor LED class. + +properties: + compatible: + const: pwm-leds-multicolor + + multi-led: + type: object + $ref: leds-class-multicolor.yaml# + unevaluatedProperties: false + + properties: + max-brightness: + description: + Maximum brightness possible for the LED + $ref: /schemas/types.yaml#/definitions/uint32 + + patternProperties: + "^led-[0-9a-z]+$": + type: object + $ref: common.yaml# + + additionalProperties: false + + properties: + pwms: + maxItems: 1 + + pwm-names: true + + active-low: + description: For PWMs where the LED is wired to supply rather than ground. + type: boolean + + color: true + + required: + - pwms + - color + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + max-brightness = <65535>; + + led-red { + pwms = <&pwm1 0 1000000>; + color = <LED_COLOR_ID_RED>; + }; + + led-green { + pwms = <&pwm2 0 1000000>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-blue { + pwms = <&pwm3 0 1000000>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml new file mode 100644 index 000000000..fe4d5fd25 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LEDs connected to PWM + +maintainers: + - Pavel Machek <pavel@ucw.cz> + +description: + Each LED is represented as a sub-node of the pwm-leds device. Each + node's name represents the name of the corresponding LED. + +properties: + compatible: + const: pwm-leds + +patternProperties: + "^led(-[0-9a-f]+)?$": + type: object + + $ref: common.yaml# + + properties: + pwms: + maxItems: 1 + + pwm-names: true + + max-brightness: + description: + Maximum brightness possible for the LED + $ref: /schemas/types.yaml#/definitions/uint32 + + active-low: + description: + For PWMs where the LED is wired to supply rather than ground. + type: boolean + + required: + - pwms + - max-brightness + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "pwm-leds"; + + led-1 { + label = "omap4::keypad"; + pwms = <&twl_pwm 0 7812500>; + max-brightness = <127>; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_CHARGING; + pwms = <&twl_pwmled 0 7812500>; + max-brightness = <255>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml new file mode 100644 index 000000000..497db2891 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Light Pulse Generator + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: > + The Qualcomm Light Pulse Generator consists of three different hardware blocks; + a ramp generator with lookup table, the light pulse generator and a three + channel current sink. These blocks are found in a wide range of Qualcomm PMICs. + +properties: + compatible: + enum: + - qcom,pm660l-lpg + - qcom,pm8150b-lpg + - qcom,pm8150l-lpg + - qcom,pm8350c-pwm + - qcom,pm8916-pwm + - qcom,pm8941-lpg + - qcom,pm8994-lpg + - qcom,pmc8180c-lpg + - qcom,pmi8994-lpg + - qcom,pmi8998-lpg + + "#pwm-cells": + const: 2 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + qcom,power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + power-source used to drive the output, as defined in the datasheet. + Should be specified if the TRILED block is present + enum: [0, 1, 3] + + qcom,dtest: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: > + A list of integer pairs, where each pair represent the dtest line the + particular channel should be connected to and the flags denoting how the + value should be outputed, as defined in the datasheet. The number of + pairs should be the same as the number of channels. + items: + items: + - description: dtest line to attach + - description: flags for the attachment + + multi-led: + type: object + $ref: leds-class-multicolor.yaml# + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^led@[0-9a-f]$": + type: object + $ref: common.yaml# + +patternProperties: + "^led@[0-9a-f]$": + type: object + $ref: common.yaml# + + properties: + reg: true + + required: + - reg + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "qcom,pmi8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,power-source = <1>; + + qcom,dtest = <0 0>, + <0 0>, + <0 0>, + <4 1>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; + default-state = "on"; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led@4 { + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + - | + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "qcom,pmi8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,power-source = <1>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + - | + pwm-controller { + compatible = "qcom,pm8916-pwm"; + #pwm-cells = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml new file mode 100644 index 000000000..5b0c74aa6 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-rt4505.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4505 Single Channel LED Driver + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT4505 is a flash LED driver that can support up to 375mA and 1.5A for + torch and flash mode, respectively. + + The data sheet can be found at: + https://www.richtek.com/assets/product_file/RT4505/DS4505-02.pdf + +properties: + compatible: + const: richtek,rt4505 + + reg: + description: I2C slave address of the controller. + maxItems: 1 + + led: + type: object + $ref: common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@63 { + compatible = "richtek,rt4505"; + reg = <0x63>; + + rt4505_flash: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <375000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <800000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt new file mode 100644 index 000000000..df2b4e1c4 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt @@ -0,0 +1,43 @@ +LEDs connected to Spreadtrum SC27XX PMIC breathing light controller + +The SC27xx breathing light controller supports to 3 outputs: +red LED, green LED and blue LED. Each LED can work at normal +PWM mode or breath light mode. + +Required properties: +- compatible: Should be "sprd,sc2731-bltc". +- #address-cells: Must be 1. +- #size-cells: Must be 0. +- reg: Specify the controller address. + +Required child properties: +- reg: Port this LED is connected to. + +Optional child properties: +- function: See Documentation/devicetree/bindings/leds/common.txt. +- color: See Documentation/devicetree/bindings/leds/common.txt. +- label: See Documentation/devicetree/bindings/leds/common.txt (deprecated). + +Examples: + +led-controller@200 { + compatible = "sprd,sc2731-bltc"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x200>; + + led@0 { + color = <LED_COLOR_ID_RED>; + reg = <0x0>; + }; + + led@1 { + color = <LED_COLOR_ID_GREEN>; + reg = <0x1>; + }; + + led@2 { + color = <LED_COLOR_ID_BLUE>; + reg = <0x2>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml new file mode 100644 index 000000000..f68259619 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-sgm3140.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SGMICRO SGM3140 500mA Buck/Boost Charge Pump LED Driver + +maintainers: + - Luca Weiss <luca@z3ntu.xyz> + +description: | + The SGM3140 is a current-regulated charge pump which can regulate two current + levels for Flash and Torch modes. + + The data sheet can be found at: + http://www.sg-micro.com/uploads/soft/20190626/1561535688.pdf + +properties: + compatible: + const: sgmicro,sgm3140 + + enable-gpios: + maxItems: 1 + description: A connection to the 'EN' pin. + + flash-gpios: + maxItems: 1 + description: A connection to the 'FLASH' pin. + + vin-supply: + description: Regulator providing power to the 'VIN' pin. + + led: + type: object + $ref: common.yaml# + +required: + - compatible + - flash-gpios + - enable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "sgmicro,sgm3140"; + flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ + vin-supply = <®_dcdc1>; + + sgm3140_flash: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-spi-byte.txt b/Documentation/devicetree/bindings/leds/leds-spi-byte.txt new file mode 100644 index 000000000..28b6b2d90 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-spi-byte.txt @@ -0,0 +1,44 @@ +* Single Byte SPI LED Device Driver. + +The driver can be used for controllers with a very simple SPI protocol: +- one LED is controlled by a single byte on MOSI +- the value of the byte gives the brightness between two values (lowest to + highest) +- no return value is necessary (no MISO signal) + +The value for lowest and highest brightness is dependent on the device and +therefore on the compatible string. + +Depending on the compatible string some special functions (like hardware +accelerated blinking) might can be supported too. + +The driver currently only supports one LED. The properties of the LED are +configured in a sub-node in the device node. + +Required properties: +- compatible: should be one of + * "ubnt,acb-spi-led" microcontroller (SONiX 8F26E611LA) based device + used for example in Ubiquiti airCube ISP + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. + +LED sub-node properties: +- label: + see Documentation/devicetree/bindings/leds/common.txt +- default-state: + see Documentation/devicetree/bindings/leds/common.txt + Only "on" and "off" are supported. + +Example: + +led-controller@0 { + compatible = "ubnt,acb-spi-led"; + reg = <0>; + spi-max-frequency = <100000>; + + led { + label = "white:status"; + default-state = "on"; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt new file mode 100644 index 000000000..3bbbf7024 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt @@ -0,0 +1,40 @@ +LEDs connected to tlc59116 or tlc59108 + +Required properties +- compatible: should be "ti,tlc59116" or "ti,tlc59108" +- #address-cells: must be 1 +- #size-cells: must be 0 +- reg: typically 0x68 + +Each led is represented as a sub-node of the ti,tlc59116. +See Documentation/devicetree/bindings/leds/common.txt + +LED sub-node properties: +- reg: number of LED line, 0 to 15 or 0 to 7 +- label: (optional) name of LED +- linux,default-trigger : (optional) + +Examples: + +tlc59116@68 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,tlc59116"; + reg = <0x68>; + + wan@0 { + label = "wrt1900ac:amber:wan"; + reg = <0x0>; + }; + + 2g@2 { + label = "wrt1900ac:white:2g"; + reg = <0x2>; + }; + + alive@9 { + label = "wrt1900ac:green:alive"; + reg = <0x9>; + linux,default_trigger = "heartbeat"; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt b/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt new file mode 100644 index 000000000..d3696680b --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt @@ -0,0 +1,49 @@ +* Pattern format for LED pattern trigger + +The pattern is given by a series of tuples, of brightness and duration (ms). +The LED is expected to traverse the series and each brightness value for the +specified duration. Duration of 0 means brightness should immediately change to +new value, and writing malformed pattern deactivates any active one. + +1. For gradual dimming, the dimming interval now is set as 50 milliseconds. So +the tuple with duration less than dimming interval (50ms) is treated as a step +change of brightness, i.e. the subsequent brightness will be applied without +adding intervening dimming intervals. + +The gradual dimming format of the software pattern values should be: +"brightness_1 duration_1 brightness_2 duration_2 brightness_3 duration_3 ...". +For example (using sysfs interface): + +echo 0 1000 255 2000 > pattern + +It will make the LED go gradually from zero-intensity to max (255) intensity in +1000 milliseconds, then back to zero intensity in 2000 milliseconds: + +LED brightness + ^ +255-| / \ / \ / + | / \ / \ / + | / \ / \ / + | / \ / \ / + 0-| / \/ \/ + +---0----1----2----3----4----5----6------------> time (s) + +2. To make the LED go instantly from one brightness value to another, we should +use zero-time lengths (the brightness must be same as the previous tuple's). So +the format should be: "brightness_1 duration_1 brightness_1 0 brightness_2 +duration_2 brightness_2 0 ...". +For example (using sysfs interface): + +echo 0 1000 0 0 255 2000 255 0 > pattern + +It will make the LED stay off for one second, then stay at max brightness for +two seconds: + +LED brightness + ^ +255-| +---------+ +---------+ + | | | | | + | | | | | + | | | | | + 0-| -----+ +----+ +---- + +---0----1----2----3----4----5----6------------> time (s) diff --git a/Documentation/devicetree/bindings/leds/maxim,max77693.yaml b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml new file mode 100644 index 000000000..e27f57bb5 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated + Circuit (MUIC). + + There are two LED outputs available - FLED1 and FLED2. Each of them can + control a separate LED or they can be connected together to double the + maximum current for a single connected LED. One LED is represented by one + child node. + + See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77693-led + + maxim,boost-mode: + description: + In boost mode the device can produce up to 1.2A of total current on both + outputs. The maximum current on each output is reduced to 625mA then. If + not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in + case both current sources are used. + See LEDS_BOOST_* in include/dt-bindings/leds/common.h. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + maxim,boost-mvout: + description: | + Output voltage of the boost module in millivolts. + Valid values: 3300 - 5500, step by 25 (rounded down) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 3300 + maximum: 5500 + default: 3300 + + maxim,mvsys-min: + description: | + Low input voltage level in millivolts. Flash is not fired if chip + estimates that system voltage could drop below this level due to flash + power consumption. + Valid values: 2400 - 3400, step by 33 (rounded down) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2400 + maximum: 3400 + default: 2400 + +patternProperties: + "^([a-z]+-)?led[01]?$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + led-sources: + allOf: + - minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + led-max-microamp: + description: | + Valid values for a LED connected to one FLED output: + 15625 - 250000, step by 15625 (rounded down) + Valid values for a LED connected to both FLED outputs: + 15625 - 500000, step by 15625 (rounded down) + + flash-max-microamp: + description: | + Valid values for a single LED connected to one FLED output + (boost mode must be turned off): + 15625 - 1000000, step by 15625 (rounded down) + Valid values for a single LED connected to both FLED outputs: + 15625 - 1250000, step by 15625 (rounded down) + Valid values for two LEDs case: + 15625 - 625000, step by 15625 (rounded down) + + flash-max-timeout-us: + description: | + Valid values: 62500 - 1000000, step by 62500 (rounded down) + minimum: 62500 + maximum: 1000000 + + required: + - flash-max-microamp + - flash-max-timeout-us + - led-max-microamp + - led-sources + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml new file mode 100644 index 000000000..e9d02ed6a --- /dev/null +++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/mediatek,mt6370-flashlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Flash LED driver for MT6370 PMIC from MediaTek Integrated. + +maintainers: + - Alice Chen <alice_chen@richtek.com> + +description: | + This module is part of the MT6370 MFD device. + Add MT6370 flash LED driver include 2-channel flash LED support Torch/Strobe Mode. + +properties: + compatible: + const: mediatek,mt6370-flashlight + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[0-1]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + enum: [0, 1] + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml new file mode 100644 index 000000000..16b3abc2a --- /dev/null +++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/mediatek,mt6370-indicator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LED driver for MT6370 PMIC from MediaTek Integrated. + +maintainers: + - Alice Chen <alice_chen@richtek.com> + +description: | + This module is part of the MT6370 MFD device. + Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode + +properties: + compatible: + const: mediatek,mt6370-indicator + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^multi-led@[0-3]$": + type: object + $ref: leds-class-multicolor.yaml# + unevaluatedProperties: false + + properties: + reg: + enum: [0, 1, 2, 3] + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^led@[0-2]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + enum: [0, 1, 2] + + required: + - reg + - color + + required: + - reg + - color + - "#address-cells" + - "#size-cells" + + "^led@[0-3]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + enum: [0, 1, 2, 3] + + required: + - reg + - color + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt new file mode 100644 index 000000000..4eee41482 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/pca963x.txt @@ -0,0 +1,52 @@ +LEDs connected to pca9632, pca9633 or pca9634 + +Required properties: +- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635" + +Optional properties: +- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults + to open-drain, newer chips to totem pole) +- nxp,hw-blink : use hardware blinking instead of software blinking +- nxp,period-scale : In some configurations, the chip blinks faster than expected. + This parameter provides a scaling ratio (fixed point, decimal divided + by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x. +- nxp,inverted-out: invert the polarity of the generated PWM + +Each led is represented as a sub-node of the nxp,pca963x device. + +LED sub-node properties: +- label : (optional) see Documentation/devicetree/bindings/leds/common.txt +- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633, + 0 to 7 in pca9634, or 0 to 15 in pca9635) +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Examples: + +pca9632: pca9632 { + compatible = "nxp,pca9632"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x62>; + + red@0 { + label = "red"; + reg = <0>; + linux,default-trigger = "none"; + }; + green@1 { + label = "green"; + reg = <1>; + linux,default-trigger = "none"; + }; + blue@2 { + label = "blue"; + reg = <2>; + linux,default-trigger = "none"; + }; + unused@3 { + label = "unused"; + reg = <3>; + linux,default-trigger = "none"; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.yaml b/Documentation/devicetree/bindings/leds/register-bit-led.yaml new file mode 100644 index 000000000..79b8fc0f9 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/register-bit-led.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/register-bit-led.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device Tree Bindings for Register Bit LEDs + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: |+ + Register bit leds are used with syscon multifunctional devices where single + bits in a certain register can turn on/off a single LED. The register bit LEDs + appear as children to the syscon device, with the proper compatible string. + For the syscon bindings see: + Documentation/devicetree/bindings/mfd/syscon.yaml + +allOf: + - $ref: /schemas/leds/common.yaml# + +properties: + $nodename: + description: + The unit-address is in the form of @<reg addr>,<bit offset> + pattern: '^led@[0-9a-f]+,[0-9a-f]{1,2}$' + + compatible: + const: register-bit-led + + reg: + description: + The register address and size + maxItems: 1 + + mask: + description: + bit mask for the bit controlling this LED in the register + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + [ 0x1, 0x2, 0x4, 0x8, 0x10, 0x20, 0x40, 0x80, 0x100, 0x200, 0x400, 0x800, + 0x1000, 0x2000, 0x4000, 0x8000, 0x10000, 0x20000, 0x40000, 0x80000, + 0x100000, 0x200000, 0x400000, 0x800000, 0x1000000, 0x2000000, 0x4000000, + 0x8000000, 0x10000000, 0x20000000, 0x40000000, 0x80000000 ] + + offset: + description: + register offset to the register controlling this LED + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + +required: + - compatible + - mask + - reg + +unevaluatedProperties: false + +examples: + - | + + syscon@10000000 { + compatible = "arm,realview-pb1176-syscon", "syscon"; + reg = <0x10000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x1000>; + + led@8,0 { + compatible = "register-bit-led"; + reg = <0x08 0x04>; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@8,1 { + compatible = "register-bit-led"; + reg = <0x08 0x04>; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + default-state = "off"; + }; + led@8,2 { + compatible = "register-bit-led"; + reg = <0x08 0x04>; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + default-state = "off"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/leds/regulator-led.yaml b/Documentation/devicetree/bindings/leds/regulator-led.yaml new file mode 100644 index 000000000..3e020d700 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/regulator-led.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/regulator-led.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device Tree Bindings for Regulator LEDs + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + Regulator LEDs are powered by a single regulator such that they can + be turned on or off by enabling or disabling the regulator. The available + brightness settings will be inferred from the available voltages on the + regulator, and any constraints on the voltage or current will need to be + specified on the regulator. + +allOf: + - $ref: common.yaml# + +properties: + $nodename: + pattern: '^led.*$' + + compatible: + const: regulator-led + + vled-supply: + description: + The regulator controlling the current to the LED. + + function: true + color: true + linux,default-trigger: true + default-state: true + +required: + - compatible + - vled-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + led-heartbeat { + compatible = "regulator-led"; + vled-supply = <®ulator>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + linux,default-trigger = "heartbeat"; + }; +... diff --git a/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml new file mode 100644 index 000000000..68c328eec --- /dev/null +++ b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/richtek,rt8515.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT8515 1.5A dual channel LED driver + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Richtek RT8515 is a dual channel (two mode) LED driver that + supports driving a white LED in flash or torch mode. The maximum + current for each mode is defined in hardware using two resistors + RFS and RTS. + +properties: + compatible: + const: richtek,rt8515 + + enf-gpios: + maxItems: 1 + description: A connection to the 'ENF' (enable flash) pin. + + ent-gpios: + maxItems: 1 + description: A connection to the 'ENT' (enable torch) pin. + + richtek,rfs-ohms: + minimum: 7680 + maximum: 367000 + description: The resistance value of the RFS resistor. This + resistors limits the maximum flash current. This must be set + for the property flash-max-microamp to work, the RFS resistor + defines the range of the dimmer setting (brightness) of the + flash LED. + + richtek,rts-ohms: + minimum: 7680 + maximum: 367000 + description: The resistance value of the RTS resistor. This + resistors limits the maximum torch current. This must be set + for the property torch-max-microamp to work, the RTS resistor + defines the range of the dimmer setting (brightness) of the + torch LED. + + led: + type: object + $ref: common.yaml# + properties: + function: true + color: true + flash-max-timeout-us: true + + flash-max-microamp: + maximum: 700000 + description: The maximum current for flash mode + is hardwired to the component using the RFS resistor to + ground. The maximum hardware current setting is calculated + according to the formula Imax = 5500 / RFS. The lowest + allowed resistance value is 7.86 kOhm giving an absolute + maximum current of 700mA. By setting this attribute in + the device tree, you can further restrict the maximum + current below the hardware limit. This requires the RFS + to be defined as it defines the maximum range. + + led-max-microamp: + maximum: 700000 + description: The maximum current for torch mode + is hardwired to the component using the RTS resistor to + ground. The maximum hardware current setting is calculated + according to the formula Imax = 5500 / RTS. The lowest + allowed resistance value is 7.86 kOhm giving an absolute + maximum current of 700mA. By setting this attribute in + the device tree, you can further restrict the maximum + current below the hardware limit. This requires the RTS + to be defined as it defines the maximum range. + + additionalProperties: false + +required: + - compatible + - ent-gpios + - enf-gpios + - led + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "richtek,rt8515"; + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <150000>; + led-max-microamp = <25000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml new file mode 100644 index 000000000..86a37c92b --- /dev/null +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/rohm,bd71828-leds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71828 Power Management Integrated Circuit LED driver + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + This module is part of the ROHM BD71828 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml. + + The LED controller is represented as a sub-node of the PMIC node on the device + tree. + + The device has two LED outputs referred as GRNLED and AMBLED in data-sheet. + +select: false + +properties: + compatible: + const: rohm,bd71828-leds + +patternProperties: + "^led-[1-2]$": + type: object + description: + Properties for a single LED. + properties: + #allOf: + #- $ref: "common.yaml#" + rohm,led-compatible: + description: LED identification string + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - bd71828-ambled + - bd71828-grnled + function: + description: + Purpose of LED as defined in dt-bindings/leds/common.h + $ref: "/schemas/types.yaml#/definitions/string" + color: + description: + LED colour as defined in dt-bindings/leds/common.h + $ref: "/schemas/types.yaml#/definitions/uint32" + +required: + - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml new file mode 100644 index 000000000..a6aaa92db --- /dev/null +++ b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + The device is controlled through two pins:: FL_EN and EN_SET. The pins when, + asserted high, enable flash strobe and movie mode (max 1/2 of flash current) + respectively. In order to add a capability of selecting the strobe signal + source (e.g. CPU or camera sensor) there is an additional switch required, + independent of the flash chip. The switch is controlled with pin control. + +properties: + compatible: + const: skyworks,aat1290 + + enset-gpios: + maxItems: 1 + description: EN_SET pin + + flen-gpios: + maxItems: 1 + description: FL_EN pin + + led: + $ref: common.yaml# + unevaluatedProperties: false + + properties: + led-max-microamp: true + + flash-max-microamp: + description: | + Maximum flash LED supply current can be calculated using following + formula:: I = 1A * 162 kOhm / Rset. + + flash-max-timeout-us: + description: | + Maximum flash timeout can be calculated using following formula:: + T = 8.82 * 10^9 * Ct. + + required: + - flash-max-microamp + - flash-max-timeout-us + - led-max-microamp + + pinctrl-names: + items: + - const: default + - const: host + - const: isp + + pinctrl-0: true + pinctrl-1: true + pinctrl-2: true + +required: + - compatible + - enset-gpios + - flen-gpios + - led + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + // Ct = 220 nF, Rset = 160 kOhm + led-controller { + compatible = "skyworks,aat1290"; + flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; + enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "host", "isp"; + pinctrl-0 = <&camera_flash_host>; + pinctrl-1 = <&camera_flash_host>; + pinctrl-2 = <&camera_flash_isp>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <520833>; + flash-max-microamp = <1012500>; + flash-max-timeout-us = <1940000>; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml new file mode 100644 index 000000000..32c600387 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/ti,tca6507.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TCA6507 LED and GPIO controller + +maintainers: + - NeilBrown <neilb@suse.de> + +description: + The TCA6507 is a programmable LED controller connected via I2C that can drive + 7 separate lines either by holding them low, or by pulsing them with modulated + width. + +properties: + compatible: + const: ti,tca6507 + + reg: + description: I2C slave address of the controller. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-line-names: true + +patternProperties: + "^led@[0-6]$": + type: object + + $ref: common.yaml# + + properties: + reg: + minimum: 0 + maximum: 6 + + required: + - reg + + "^gpio@[0-6]$": + type: object + + properties: + compatible: + const: gpio + + reg: + minimum: 0 + maximum: 6 + + additionalProperties: false + + required: + - reg + - compatible + +if: + patternProperties: + "^gpio@[0-6]$": + type: object + properties: + compatible: + contains: + const: gpio +then: + required: + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@45 { + compatible = "ti,tca6507"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x45>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "wifi_reset@6"; + + led@0 { + label = "gta04:red:aux"; + reg = <0x0>; + }; + + led@1 { + label = "gta04:green:aux"; + reg = <0x1>; + }; + + led@3 { + reg = <0x3>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + linux,default-trigger = "default-on"; + }; + + led@4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + reg = <0x4>; + }; + + gpio@6 { + compatible = "gpio"; + reg = <0x6>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml new file mode 100644 index 000000000..89a1cde2b --- /dev/null +++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/trigger-source.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trigger source providers + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: + Each trigger source provider should be represented by a device tree node. It + may be e.g. a USB port or an Ethernet device. + +properties: + '#trigger-source-cells': + description: + Number of cells in a source trigger. Typically 0 for nodes of simple + trigger sources (e.g. a specific USB port). + enum: [ 0, 1 ] + +additionalProperties: true + +... |