summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c/mt9m001.txt')
-rw-r--r--Documentation/devicetree/bindings/media/i2c/mt9m001.txt38
1 files changed, 38 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m001.txt b/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
new file mode 100644
index 000000000..c920552b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
@@ -0,0 +1,38 @@
+MT9M001: 1/2-Inch Megapixel Digital Image Sensor
+
+The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital
+image sensor. It is programmable through I2C interface.
+
+Required Properties:
+
+- compatible: shall be "onnn,mt9m001".
+- clocks: reference to the master clock into sensor
+
+Optional Properties:
+
+- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
+ Active low.
+- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
+ Active high.
+
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ &i2c1 {
+ camera-sensor@5d {
+ compatible = "onnn,mt9m001";
+ reg = <0x5d>;
+ reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ clocks = <&camera_clk>;
+ port {
+ mt9m001_out: endpoint {
+ remote-endpoint = <&vcap_in>;
+ };
+ };
+ };
+ };