summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c/ov8856.yaml')
-rw-r--r--Documentation/devicetree/bindings/media/i2c/ov8856.yaml134
1 files changed, 134 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
new file mode 100644
index 000000000..baf92aaaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2019 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
+
+maintainers:
+ - Dongchun Zhu <dongchun.zhu@mediatek.com>
+
+description: |-
+ The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
+ image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
+ sub-sampled, and windowed 10-bit MIPI images in various formats via the
+ Serial Camera Control Bus (SCCB) interface. This chip is programmable
+ through I2C and two-wire SCCB. The sensor output is available via CSI-2
+ serial data output (up to 4-lane).
+
+properties:
+ compatible:
+ const: ovti,ov8856
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description:
+ Input clock for the sensor.
+ items:
+ - const: xvclk
+
+ clock-frequency:
+ description:
+ Frequency of the xvclk clock in Hertz.
+
+ dovdd-supply:
+ description:
+ Definition of the regulator used as interface power supply.
+
+ avdd-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+ dvdd-supply:
+ description:
+ Definition of the regulator used as digital power supply.
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ This corresponds to the hardware pin XSHUTDOWN which is physically
+ active low.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: |-
+ The driver only supports four-lane operation.
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ link-frequencies:
+ description: Frequencies listed are driver, not h/w limitations.
+ maxItems: 2
+ items:
+ enum: [ 360000000, 180000000 ]
+
+ required:
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-frequency
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov8856: camera@10 {
+ compatible = "ovti,ov8856";
+ reg = <0x10>;
+
+ reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_24m_cam>;
+
+ clocks = <&cam_osc>;
+ clock-names = "xvclk";
+ clock-frequency = <19200000>;
+
+ avdd-supply = <&mt6358_vcama2_reg>;
+ dvdd-supply = <&mt6358_vcamd_reg>;
+ dovdd-supply = <&mt6358_vcamio_reg>;
+
+ port {
+ wcam_out: endpoint {
+ remote-endpoint = <&mipi_in_wcam>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <360000000>;
+ };
+ };
+ };
+ };
+...