summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt')
-rw-r--r--Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt54
1 files changed, 54 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt
new file mode 100644
index 000000000..8765c605e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt
@@ -0,0 +1,54 @@
+* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller
+
+The highspeed MMC host controller on Amlogic SoCs provides an interface
+for MMC, SD, SDIO and SDHC types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.41 as well
+as the speed of SD standard 2.0.
+
+The hardware provides an internal "mux" which allows up to three slots
+to be controlled. Only one slot can be accessed at a time.
+
+Required properties:
+ - compatible : must be one of
+ - "amlogic,meson8-sdio"
+ - "amlogic,meson8b-sdio"
+ along with the generic "amlogic,meson-mx-sdio"
+ - reg : mmc controller base registers
+ - interrupts : mmc controller interrupt
+ - #address-cells : must be 1
+ - size-cells : must be 0
+ - clocks : phandle to clock providers
+ - clock-names : must contain "core" and "clkin"
+
+Required child nodes:
+A node for each slot provided by the MMC controller is required.
+NOTE: due to a driver limitation currently only one slot (= child node)
+ is supported!
+
+Required properties on each child node (= slot):
+ - compatible : must be "mmc-slot" (see mmc.txt within this directory)
+ - reg : the slot (or "port") ID
+
+Optional properties on each child node (= slot):
+ - bus-width : must be 1 or 4 (8-bit bus is not supported)
+ - for cd and all other additional generic mmc parameters
+ please refer to mmc.txt within this directory
+
+Examples:
+ mmc@c1108c20 {
+ compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+ reg = <0xc1108c20 0x20>;
+ interrupts = <0 28 1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+ clock-names = "core", "clkin";
+
+ slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+
+ bus-width = <4>;
+ };
+ };