summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/partitions/partition.yaml')
-rw-r--r--Documentation/devicetree/bindings/mtd/partitions/partition.yaml63
1 files changed, 63 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
new file mode 100644
index 000000000..f1a02d840
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partition
+
+description: |
+ This binding describes a single flash partition. Each partition must have its
+ relative offset and size specified. Depending on partition function extra
+ properties can be used.
+
+ A partition may be dynamically allocated by a specific parser at runtime.
+ In this specific case, a specific suffix is required to the node name.
+ Everything after 'partition-' will be used as the partition name to compare
+ with the one dynamically allocated by the specific parser.
+ If the partition contains invalid char a label can be provided that will
+ be used instead of the node name to make the comparison.
+ This is used to assign an OF node to the dynamiccally allocated partition
+ so that subsystem like NVMEM can provide an OF node and declare NVMEM cells.
+ The OF node will be assigned only if the partition label declared match the
+ one assigned by the parser at runtime.
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+ reg:
+ description: partition's offset and size within the flash
+ maxItems: 1
+
+ label:
+ description: The label / name for this partition. If omitted, the label
+ is taken from the node name (excluding the unit address).
+
+ read-only:
+ description: This parameter, if present, is a hint that this partition
+ should only be mounted read-only. This is usually used for flash
+ partitions containing early-boot firmware images or data which should
+ not be clobbered.
+ type: boolean
+
+ lock:
+ description: Do not unlock the partition at initialization time (not
+ supported on all devices)
+ type: boolean
+
+ slc-mode:
+ description: This parameter, if present, allows one to emulate SLC mode
+ on a partition attached to an MLC NAND thus making this partition
+ immune to paired-pages corruptions
+ type: boolean
+
+if:
+ not:
+ required: [ reg ]
+then:
+ properties:
+ $nodename:
+ pattern: '^partition-.*$'
+
+additionalProperties: true