summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/can
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/can')
-rw-r--r--Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml78
-rw-r--r--Documentation/devicetree/bindings/net/can/atmel-can.txt15
-rw-r--r--Documentation/devicetree/bindings/net/can/bosch,c_can.yaml116
-rw-r--r--Documentation/devicetree/bindings/net/can/bosch,m_can.yaml152
-rw-r--r--Documentation/devicetree/bindings/net/can/can-controller.yaml27
-rw-r--r--Documentation/devicetree/bindings/net/can/can-transceiver.yaml20
-rw-r--r--Documentation/devicetree/bindings/net/can/cc770.txt53
-rw-r--r--Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml66
-rw-r--r--Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml167
-rw-r--r--Documentation/devicetree/bindings/net/can/grcan.txt28
-rw-r--r--Documentation/devicetree/bindings/net/can/holt_hi311x.txt23
-rw-r--r--Documentation/devicetree/bindings/net/can/ifi_canfd.txt15
-rw-r--r--Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt30
-rw-r--r--Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml83
-rw-r--r--Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml45
-rw-r--r--Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt53
-rw-r--r--Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml136
-rw-r--r--Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml139
-rw-r--r--Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml185
-rw-r--r--Documentation/devicetree/bindings/net/can/tcan4x5x.txt40
-rw-r--r--Documentation/devicetree/bindings/net/can/ti_hecc.txt32
-rw-r--r--Documentation/devicetree/bindings/net/can/xilinx,can.yaml161
22 files changed, 1664 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
new file mode 100644
index 000000000..3c51b2d02
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/allwinner,sun4i-a10-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CAN Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: allwinner,sun7i-a20-can
+ - const: allwinner,sun4i-a10-can
+ - const: allwinner,sun4i-a10-can
+ - const: allwinner,sun8i-r40-can
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun8i-r40-can
+
+then:
+ required:
+ - resets
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/sun7i-a20-ccu.h>
+
+ can0: can@1c2bc00 {
+ compatible = "allwinner,sun7i-a20-can",
+ "allwinner,sun4i-a10-can";
+ reg = <0x01c2bc00 0x400>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_CAN>;
+ };
+ - |
+ #define RST_BUS_CAN 68
+ #define CLK_BUS_CAN 91
+ can1: can@1c2bc00 {
+ compatible = "allwinner,sun8i-r40-can";
+ reg = <0x01c2bc00 0x400>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CAN>;
+ resets = <&ccu RST_BUS_CAN>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt
new file mode 100644
index 000000000..218a3b3eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt
@@ -0,0 +1,15 @@
+* AT91 CAN *
+
+Required properties:
+ - compatible: Should be "atmel,at91sam9263-can", "atmel,at91sam9x5-can" or
+ "microchip,sam9x60-can"
+ - reg: Should contain CAN controller registers location and length
+ - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+ can0: can@f000c000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf000c000 0x300>;
+ interrupts = <40 4 5>
+ };
diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
new file mode 100644
index 000000000..51aa89ac7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch C_CAN/D_CAN controller Device Tree Bindings
+
+description: Bosch C_CAN/D_CAN controller for CAN bus
+
+maintainers:
+ - Dario Binacchi <dariobin@libero.it>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - bosch,c_can
+ - bosch,d_can
+ - ti,dra7-d_can
+ - ti,am3352-d_can
+ - items:
+ - enum:
+ - ti,am4372-d_can
+ - const: ti,am3352-d_can
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+
+ power-domains:
+ description: |
+ Should contain a phandle to a PM domain provider node and an args
+ specifier containing the DCAN device id value. It's mandatory for
+ Keystone 2 66AK2G SoCs only.
+ maxItems: 1
+
+ clocks:
+ description: |
+ CAN functional clock phandle.
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+
+ syscon-raminit:
+ description: |
+ Handle to system control region that contains the RAMINIT register,
+ register offset to the RAMINIT register and the CAN instance number (0
+ offset).
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: The phandle to the system control region.
+ - description: The register offset.
+ - description: The CAN instance number.
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - bosch,d_can
+
+then:
+ properties:
+ interrupts:
+ items:
+ - description: Error and status IRQ
+ - description: Message object IRQ
+ - description: RAM ECC correctable error IRQ
+ - description: RAM ECC non-correctable error IRQ
+
+else:
+ properties:
+ interrupts:
+ items:
+ - description: Error and status IRQ
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/reset/altr,rst-mgr.h>
+
+ can@ffc00000 {
+ compatible = "bosch,d_can";
+ reg = <0xffc00000 0x1000>;
+ interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+ clocks = <&can0_clk>;
+ resets = <&rst CAN0_RESET>;
+ };
+ - |
+ can@0 {
+ compatible = "ti,am3352-d_can";
+ reg = <0x0 0x2000>;
+ clocks = <&dcan1_fck>;
+ clock-names = "fck";
+ syscon-raminit = <&scm_conf 0x644 1>;
+ interrupts = <55>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
new file mode 100644
index 000000000..26aa0830e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch MCAN controller Bindings
+
+description: Bosch MCAN controller for CAN bus
+
+maintainers:
+ - Chandrasekar Ramakrishnan <rcsekar@samsung.com>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ const: bosch,m_can
+
+ reg:
+ items:
+ - description: M_CAN registers map
+ - description: message RAM
+
+ reg-names:
+ items:
+ - const: m_can
+ - const: message_ram
+
+ interrupts:
+ items:
+ - description: interrupt line0
+ - description: interrupt line1
+ minItems: 1
+
+ interrupt-names:
+ items:
+ - const: int0
+ - const: int1
+ minItems: 1
+
+ clocks:
+ items:
+ - description: peripheral clock
+ - description: bus clock
+
+ clock-names:
+ items:
+ - const: hclk
+ - const: cclk
+
+ bosch,mram-cfg:
+ description: |
+ Message RAM configuration data.
+ Multiple M_CAN instances can share the same Message RAM
+ and each element(e.g Rx FIFO or Tx Buffer and etc) number
+ in Message RAM is also configurable, so this property is
+ telling driver how the shared or private Message RAM are
+ used by this M_CAN controller.
+
+ The format should be as follows:
+ <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
+ The 'offset' is an address offset of the Message RAM where
+ the following elements start from. This is usually set to
+ 0x0 if you're using a private Message RAM. The remain cells
+ are used to specify how many elements are used for each FIFO/Buffer.
+
+ M_CAN includes the following elements according to user manual:
+ 11-bit Filter 0-128 elements / 0-128 words
+ 29-bit Filter 0-64 elements / 0-128 words
+ Rx FIFO 0 0-64 elements / 0-1152 words
+ Rx FIFO 1 0-64 elements / 0-1152 words
+ Rx Buffers 0-64 elements / 0-1152 words
+ Tx Event FIFO 0-32 elements / 0-64 words
+ Tx Buffers 0-32 elements / 0-576 words
+
+ Please refer to 2.4.1 Message RAM Configuration in Bosch
+ M_CAN user manual for details.
+ $ref: /schemas/types.yaml#/definitions/int32-array
+ items:
+ - description: The 'offset' is an address offset of the Message RAM where
+ the following elements start from. This is usually set to 0x0 if
+ you're using a private Message RAM.
+ default: 0
+ - description: 11-bit Filter 0-128 elements / 0-128 words
+ minimum: 0
+ maximum: 128
+ - description: 29-bit Filter 0-64 elements / 0-128 words
+ minimum: 0
+ maximum: 64
+ - description: Rx FIFO 0 0-64 elements / 0-1152 words
+ minimum: 0
+ maximum: 64
+ - description: Rx FIFO 1 0-64 elements / 0-1152 words
+ minimum: 0
+ maximum: 64
+ - description: Rx Buffers 0-64 elements / 0-1152 words
+ minimum: 0
+ maximum: 64
+ - description: Tx Event FIFO 0-32 elements / 0-64 words
+ minimum: 0
+ maximum: 32
+ - description: Tx Buffers 0-32 elements / 0-576 words
+ minimum: 0
+ maximum: 32
+ minItems: 1
+
+ power-domains:
+ description:
+ Power domain provider node and an args specifier containing
+ the can device id value.
+ maxItems: 1
+
+ can-transceiver:
+ $ref: can-transceiver.yaml#
+
+ phys:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - bosch,mram-cfg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6sx-clock.h>
+ can@20e8000 {
+ compatible = "bosch,m_can";
+ reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <0 114 0x04>, <0 114 0x04>;
+ interrupt-names = "int0", "int1";
+ clocks = <&clks IMX6SX_CLK_CANFD>,
+ <&clks IMX6SX_CLK_CANFD>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
+
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml
new file mode 100644
index 000000000..1f0e98051
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN Controller Generic Binding
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+ $nodename:
+ pattern: "^can(@.*)?$"
+
+ termination-gpios:
+ description: GPIO pin to enable CAN bus termination.
+ maxItems: 1
+
+ termination-ohms:
+ description: The resistance value of the CAN bus termination resistor.
+ minimum: 1
+ maximum: 65535
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
new file mode 100644
index 000000000..d1ef1fe6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-transceiver.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN transceiver Bindings
+
+description: CAN transceiver generic properties bindings
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+properties:
+ max-bitrate:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run.
+ minimum: 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/net/can/cc770.txt b/Documentation/devicetree/bindings/net/can/cc770.txt
new file mode 100644
index 000000000..77027bf64
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/cc770.txt
@@ -0,0 +1,53 @@
+Memory mapped Bosch CC770 and Intel AN82527 CAN controller
+
+Note: The CC770 is a CAN controller from Bosch, which is 100%
+compatible with the old AN82527 from Intel, but with "bugs" being fixed.
+
+Required properties:
+
+- compatible : should be "bosch,cc770" for the CC770 and "intc,82527"
+ for the AN82527.
+
+- reg : should specify the chip select, address offset and size required
+ to map the registers of the controller. The size is usually 0x80.
+
+- interrupts : property with a value describing the interrupt source
+ (number and sensitivity) required for the controller.
+
+Optional properties:
+
+- bosch,external-clock-frequency : frequency of the external oscillator
+ clock in Hz. Note that the internal clock frequency used by the
+ controller is half of that value. If not specified, a default
+ value of 16000000 (16 MHz) is used.
+
+- bosch,clock-out-frequency : slock frequency in Hz on the CLKOUT pin.
+ If not specified or if the specified value is 0, the CLKOUT pin
+ will be disabled.
+
+- bosch,slew-rate : slew rate of the CLKOUT signal. If not specified,
+ a resonable value will be calculated.
+
+- bosch,disconnect-rx0-input : see data sheet.
+
+- bosch,disconnect-rx1-input : see data sheet.
+
+- bosch,disconnect-tx1-output : see data sheet.
+
+- bosch,polarity-dominant : see data sheet.
+
+- bosch,divide-memory-clock : see data sheet.
+
+- bosch,iso-low-speed-mux : see data sheet.
+
+For further information, please have a look to the CC770 or AN82527.
+
+Examples:
+
+can@3,100 {
+ compatible = "bosch,cc770";
+ reg = <3 0x100 0x80>;
+ interrupts = <2 0>;
+ interrupt-parent = <&mpic>;
+ bosch,external-clock-frequency = <16000000>;
+};
diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
new file mode 100644
index 000000000..4635cb96f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CTU CAN FD Open-source IP Core Device Tree Bindings
+
+description: |
+ Open-source CAN FD IP core developed at the Czech Technical University in Prague
+
+ The core sources and documentation on project page
+ [1] sources : https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
+ [2] datasheet : https://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf
+
+ Integration in Xilinx Zynq SoC based system together with
+ OpenCores SJA1000 compatible controllers
+ [3] project : https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top
+ Martin Jerabek dimploma thesis with integration and testing
+ framework description
+ [4] PDF : https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf
+
+maintainers:
+ - Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ - Ondrej Ille <ondrej.ille@gmail.com>
+ - Martin Jerabek <martin.jerabek01@gmail.com>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: ctu,ctucanfd-2
+ - const: ctu,ctucanfd
+ - const: ctu,ctucanfd
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description: |
+ phandle of reference clock (100 MHz is appropriate
+ for FPGA implementation on Zynq-7000 system).
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ ctu_can_fd_0: can@43c30000 {
+ compatible = "ctu,ctucanfd";
+ interrupts = <0 30 4>;
+ clocks = <&clkc 15>;
+ reg = <0x43c30000 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
new file mode 100644
index 000000000..e52db841b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx8qm-flexcan
+ - fsl,imx8mp-flexcan
+ - fsl,imx6q-flexcan
+ - fsl,imx28-flexcan
+ - fsl,imx25-flexcan
+ - fsl,p1010-flexcan
+ - fsl,vf610-flexcan
+ - fsl,ls1021ar2-flexcan
+ - fsl,lx2160ar1-flexcan
+ - items:
+ - enum:
+ - fsl,imx53-flexcan
+ - fsl,imx35-flexcan
+ - const: fsl,imx25-flexcan
+ - items:
+ - enum:
+ - fsl,imx7d-flexcan
+ - fsl,imx6ul-flexcan
+ - fsl,imx6sx-flexcan
+ - const: fsl,imx6q-flexcan
+ - items:
+ - enum:
+ - fsl,ls1028ar1-flexcan
+ - const: fsl,lx2160ar1-flexcan
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: per
+
+ clock-frequency:
+ description: |
+ The oscillator frequency driving the flexcan device, filled in by the
+ boot loader. This property should only be used the used operating system
+ doesn't support the clocks and clock-names property.
+
+ xceiver-supply:
+ description: Regulator that powers the CAN transceiver.
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ This means the registers of FlexCAN controller are big endian. This is
+ optional property.i.e. if this property is not present in device tree
+ node then controller is assumed to be little endian. If this property is
+ present then controller is assumed to be big endian.
+
+ fsl,stop-mode:
+ description: |
+ Register bits of stop mode control.
+
+ The format should be as follows:
+ <gpr req_gpr req_bit>
+ gpr is the phandle to general purpose register node.
+ req_gpr is the gpr register offset of CAN stop request.
+ req_bit is the bit offset of CAN stop request.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: The 'gpr' is the phandle to general purpose register node.
+ - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+ maximum: 0xff
+ - description: The 'req_bit' is the bit offset of CAN stop request.
+ maximum: 0x1f
+
+ fsl,clk-source:
+ description: |
+ Select the clock source to the CAN Protocol Engine (PE). It's SoC
+ implementation dependent. Refer to RM for detailed definition. If this
+ property is not set in device tree node then driver selects clock source 1
+ by default.
+ 0: clock source 0 (oscillator clock)
+ 1: clock source 1 (peripheral clock)
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 1
+ minimum: 0
+ maximum: 1
+
+ wakeup-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable CAN remote wakeup.
+
+ fsl,scu-index:
+ description: |
+ The scu index of CAN instance.
+ For SoCs with SCU support, need setup stop mode via SCU firmware, so this
+ property can help indicate a resource. It supports up to 3 CAN instances
+ now.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 0
+ maximum: 2
+
+ termination-gpios: true
+ termination-ohms: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ can@1c000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <200000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ can@2090000 {
+ compatible = "fsl,imx6q-flexcan";
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 1>, <&clks 2>;
+ clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 28>;
+ fsl,scu-index = /bits/ 8 <1>;
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ can@2090000 {
+ compatible = "fsl,imx6q-flexcan";
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 1>, <&clks 2>;
+ clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 28>;
+ termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ termination-ohms = <120>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/grcan.txt b/Documentation/devicetree/bindings/net/can/grcan.txt
new file mode 100644
index 000000000..34ef3498f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/grcan.txt
@@ -0,0 +1,28 @@
+Aeroflex Gaisler GRCAN and GRHCAN CAN controllers.
+
+The GRCAN and CRHCAN CAN controllers are available in the GRLIB VHDL IP core
+library.
+
+Note: These properties are built from the AMBA plug&play in a Leon SPARC system
+(the ordinary environment for GRCAN and GRHCAN). There are no dts files for
+sparc.
+
+Required properties:
+
+- name : Should be "GAISLER_GRCAN", "01_03d", "GAISLER_GRHCAN" or "01_034"
+
+- reg : Address and length of the register set for the device
+
+- freq : Frequency of the external oscillator clock in Hz (the frequency of
+ the amba bus in the ordinary case)
+
+- interrupts : Interrupt number for this device
+
+Optional properties:
+
+- systemid : If not present or if the value of the least significant 16 bits
+ of this 32-bit property is smaller than GRCAN_TXBUG_SAFE_GRLIB_VERSION
+ a bug workaround is activated.
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
diff --git a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
new file mode 100644
index 000000000..3a9926f99
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
@@ -0,0 +1,23 @@
+* Holt HI-311X stand-alone CAN controller device tree bindings
+
+Required properties:
+ - compatible: Should be one of the following:
+ - "holt,hi3110" for HI-3110
+ - reg: SPI chip select.
+ - clocks: The clock feeding the CAN controller.
+ - interrupts: Should contain IRQ line for the CAN controller.
+
+Optional properties:
+ - vdd-supply: Regulator that powers the CAN controller.
+ - xceiver-supply: Regulator that powers the CAN transceiver.
+
+Example:
+ can0: can@1 {
+ compatible = "holt,hi3110";
+ reg = <1>;
+ clocks = <&clk32m>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ vdd-supply = <&reg5v0>;
+ xceiver-supply = <&reg5v0>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/ifi_canfd.txt b/Documentation/devicetree/bindings/net/can/ifi_canfd.txt
new file mode 100644
index 000000000..20ea5c70a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ifi_canfd.txt
@@ -0,0 +1,15 @@
+IFI CANFD controller
+--------------------
+
+Required properties:
+ - compatible: Should be "ifi,canfd-1.0"
+ - reg: Should contain CAN controller registers location and length
+ - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+ canfd0: canfd@ff220000 {
+ compatible = "ifi,canfd-1.0";
+ reg = <0xff220000 0x00001000>;
+ interrupts = <0 43 0>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
new file mode 100644
index 000000000..381f8fb3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -0,0 +1,30 @@
+* Microchip MCP251X stand-alone CAN controller device tree bindings
+
+Required properties:
+ - compatible: Should be one of the following:
+ - "microchip,mcp2510" for MCP2510.
+ - "microchip,mcp2515" for MCP2515.
+ - "microchip,mcp25625" for MCP25625.
+ - reg: SPI chip select.
+ - clocks: The clock feeding the CAN controller.
+ - interrupts: Should contain IRQ line for the CAN controller.
+
+Optional properties:
+ - vdd-supply: Regulator that powers the CAN controller.
+ - xceiver-supply: Regulator that powers the CAN transceiver.
+ - gpio-controller: Indicates this device is a GPIO controller.
+ - #gpio-cells: Should be two. The first cell is the pin number and
+ the second cell is used to specify the gpio polarity.
+
+Example:
+ can0: can@1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk24m>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&reg5v0>;
+ xceiver-supply = <&reg5v0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
new file mode 100644
index 000000000..7a7305770
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN
+ controller device tree bindings
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - microchip,mcp2517fd
+ - microchip,mcp2518fd
+ - microchip,mcp251xfd
+ - items:
+ - enum:
+ - microchip,mcp251863
+ - const: microchip,mcp2518fd
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator that powers the CAN controller.
+
+ xceiver-supply:
+ description: Regulator that powers the CAN transceiver.
+
+ microchip,rx-int-gpios:
+ description:
+ GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which
+ signals a pending RX interrupt.
+ maxItems: 1
+
+ spi-max-frequency:
+ description:
+ Must be half or less of "clocks" frequency.
+ maximum: 20000000
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ can@0 {
+ compatible = "microchip,mcp251xfd";
+ reg = <0>;
+ clocks = <&can0_osc>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins>;
+ spi-max-frequency = <20000000>;
+ interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>;
+ microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&reg5v0>;
+ xceiver-supply = <&reg5v0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
new file mode 100644
index 000000000..45aa3de7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mpfs-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Microchip PolarFire SoC (MPFS) can controller
+
+maintainers:
+ - Conor Dooley <conor.dooley@microchip.com>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ const: microchip,mpfs-can
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ can@2010c000 {
+ compatible = "microchip,mpfs-can";
+ reg = <0x2010c000 0x1000>;
+ clocks = <&clkcfg 17>;
+ interrupt-parent = <&plic>;
+ interrupts = <56>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt b/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt
new file mode 100644
index 000000000..2fa4fcd38
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt
@@ -0,0 +1,53 @@
+CAN Device Tree Bindings
+------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+ are: "ip" for ip bus clock
+ "ref" for reference clock (XTAL)
+ "ref" is default in case this property is not
+ present.
+
+fsl,mpc5121-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source and divider shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+ are: "ip" for ip bus clock
+ "ref" for reference clock
+ "sys" for system clock
+ If this property is not present, an optimal CAN
+ clock source and frequency based on the system
+ clock will be selected. If this is not possible,
+ the reference clock will be used.
+
+- fsl,mscan-clock-divider: for the reference and system clock, an additional
+ clock divider can be specified. By default, a
+ value of 1 is used.
+
+Note that the MPC5121 Rev. 1 processor is not supported.
+
+Examples:
+ can@1300 {
+ compatible = "fsl,mpc5121-mscan";
+ interrupts = <12 0x8>;
+ interrupt-parent = <&ipic>;
+ reg = <0x1300 0x80>;
+ };
+
+ can@1380 {
+ compatible = "fsl,mpc5121-mscan";
+ interrupts = <13 0x8>;
+ interrupt-parent = <&ipic>;
+ reg = <0x1380 0x80>;
+ fsl,mscan-clock-source = "ref";
+ fsl,mscan-clock-divider = <3>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
new file mode 100644
index 000000000..144a37851
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+maintainers:
+ - Wolfgang Grandegger <wg@grandegger.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - nxp,sja1000
+ - technologic,sja1000
+ - items:
+ - enum:
+ - renesas,r9a06g032-sja1000 # RZ/N1D
+ - renesas,r9a06g033-sja1000 # RZ/N1S
+ - const: renesas,rzn1-sja1000 # RZ/N1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ reg-io-width:
+ description: I/O register width (in bytes) implemented by this device
+ default: 1
+ enum: [ 1, 2, 4 ]
+
+ nxp,external-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 16000000
+ description: |
+ Frequency of the external oscillator clock in Hz.
+ The internal clock frequency used by the SJA1000 is half of that value.
+
+ nxp,tx-output-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+ default: 1
+ description: |
+ operation mode of the TX output control logic. Valid values are:
+ <0> : bi-phase output mode
+ <1> : normal output mode (default)
+ <2> : test output mode
+ <3> : clock output mode
+
+ nxp,tx-output-config:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0x02
+ description: |
+ TX output pin configuration. Valid values are any one of the below
+ or combination of TX0 and TX1:
+ <0x01> : TX0 invert
+ <0x02> : TX0 pull-down (default)
+ <0x04> : TX0 pull-up
+ <0x06> : TX0 push-pull
+ <0x08> : TX1 invert
+ <0x10> : TX1 pull-down
+ <0x20> : TX1 pull-up
+ <0x30> : TX1 push-pull
+
+ nxp,clock-out-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ clock frequency in Hz on the CLKOUT pin.
+ If not specified or if the specified value is 0, the CLKOUT pin
+ will be disabled.
+
+ nxp,no-comparator-bypass:
+ type: boolean
+ description: Allows to disable the CAN input comparator.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: can-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - technologic,sja1000
+ - renesas,rzn1-sja1000
+ then:
+ required:
+ - reg-io-width
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,rzn1-sja1000
+ then:
+ required:
+ - clocks
+ - power-domains
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ can@1a000 {
+ compatible = "technologic,sja1000";
+ reg = <0x1a000 0x100>;
+ interrupts = <1>;
+ reg-io-width = <2>;
+ nxp,tx-output-config = <0x06>;
+ nxp,external-clock-frequency = <24000000>;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+ can@52104000 {
+ compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
+ reg = <0x52104000 0x800>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysctrl R9A06G032_HCLK_CAN0>;
+ power-domains = <&sysctrl>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml
new file mode 100644
index 000000000..fadc871fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/renesas,rcar-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car CAN Controller
+
+maintainers:
+ - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,can-r8a7778 # R-Car M1-A
+ - renesas,can-r8a7779 # R-Car H1
+ - const: renesas,rcar-gen1-can # R-Car Gen1
+
+ - items:
+ - enum:
+ - renesas,can-r8a7742 # RZ/G1H
+ - renesas,can-r8a7743 # RZ/G1M
+ - renesas,can-r8a7744 # RZ/G1N
+ - renesas,can-r8a7745 # RZ/G1E
+ - renesas,can-r8a77470 # RZ/G1C
+ - renesas,can-r8a7790 # R-Car H2
+ - renesas,can-r8a7791 # R-Car M2-W
+ - renesas,can-r8a7792 # R-Car V2H
+ - renesas,can-r8a7793 # R-Car M2-N
+ - renesas,can-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-can # R-Car Gen2 and RZ/G1
+
+ - items:
+ - enum:
+ - renesas,can-r8a774a1 # RZ/G2M
+ - renesas,can-r8a774b1 # RZ/G2N
+ - renesas,can-r8a774c0 # RZ/G2E
+ - renesas,can-r8a774e1 # RZ/G2H
+ - renesas,can-r8a7795 # R-Car H3
+ - renesas,can-r8a7796 # R-Car M3-W
+ - renesas,can-r8a77961 # R-Car M3-W+
+ - renesas,can-r8a77965 # R-Car M3-N
+ - renesas,can-r8a77990 # R-Car E3
+ - renesas,can-r8a77995 # R-Car D3
+ - const: renesas,rcar-gen3-can # R-Car Gen3 and RZ/G2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: clkp1
+ - const: clkp2
+ - const: can_clk
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ renesas,can-clock-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 3 ]
+ default: 0
+ description: |
+ R-Car CAN Clock Source Select. Valid values are:
+ <0x0> (default) : Peripheral clock (clkp1)
+ <0x1> : Peripheral clock (clkp2)
+ <0x3> : External input clock
+
+ assigned-clocks:
+ description:
+ Reference to the clkp2 (CANFD) clock.
+ On R-Car Gen3 and RZ/G2 SoCs, "clkp2" is the CANFD clock. This is a div6
+ clock and can be used by both CAN and CAN FD controllers at the same
+ time. It needs to be scaled to maximum frequency if any of these
+ controllers use it.
+
+ assigned-clock-rates:
+ description: Maximum frequency of the CANFD clock.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+
+allOf:
+ - $ref: can-controller.yaml#
+
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: renesas,rcar-gen1-can
+ then:
+ required:
+ - resets
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,rcar-gen3-can
+ then:
+ required:
+ - assigned-clocks
+ - assigned-clock-rates
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7791-sysc.h>
+
+ can0: can@e6e80000 {
+ compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
+ reg = <0xe6e80000 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>,
+ <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
new file mode 100644
index 000000000..6f71fc96b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/renesas,rcar-canfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car CAN FD Controller
+
+maintainers:
+ - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r8a774a1-canfd # RZ/G2M
+ - renesas,r8a774b1-canfd # RZ/G2N
+ - renesas,r8a774c0-canfd # RZ/G2E
+ - renesas,r8a774e1-canfd # RZ/G2H
+ - renesas,r8a7795-canfd # R-Car H3
+ - renesas,r8a7796-canfd # R-Car M3-W
+ - renesas,r8a77961-canfd # R-Car M3-W+
+ - renesas,r8a77965-canfd # R-Car M3-N
+ - renesas,r8a77970-canfd # R-Car V3M
+ - renesas,r8a77980-canfd # R-Car V3H
+ - renesas,r8a77990-canfd # R-Car E3
+ - renesas,r8a77995-canfd # R-Car D3
+ - const: renesas,rcar-gen3-canfd # R-Car Gen3 and RZ/G2
+
+ - items:
+ - enum:
+ - renesas,r9a07g043-canfd # RZ/G2UL
+ - renesas,r9a07g044-canfd # RZ/G2{L,LC}
+ - renesas,r9a07g054-canfd # RZ/V2L
+ - const: renesas,rzg2l-canfd # RZ/G2L family
+
+ - const: renesas,r8a779a0-canfd # R-Car V3U
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: fck
+ - const: canfd
+ - const: can_clk
+
+ power-domains:
+ maxItems: 1
+
+ resets: true
+
+ renesas,no-can-fd:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The controller can operate in either CAN FD only mode (default) or
+ Classical CAN only mode. The mode is global to both the channels.
+ Specify this property to put the controller in Classical CAN only mode.
+
+ assigned-clocks:
+ description:
+ Reference to the CANFD clock. The CANFD clock is a div6 clock and can be
+ used by both CAN (if present) and CAN FD controllers at the same time.
+ It needs to be scaled to maximum frequency if any of these controllers
+ use it.
+
+ assigned-clock-rates:
+ description: Maximum frequency of the CANFD clock.
+
+patternProperties:
+ "^channel[01]$":
+ type: object
+ description:
+ The controller supports two channels and each is represented as a child
+ node. Each child node supports the "status" property only, which
+ is used to enable/disable the respective channel.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - resets
+ - assigned-clocks
+ - assigned-clock-rates
+ - channel0
+ - channel1
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rzg2l-canfd
+then:
+ properties:
+ interrupts:
+ items:
+ - description: CAN global error interrupt
+ - description: CAN receive FIFO interrupt
+ - description: CAN0 error interrupt
+ - description: CAN0 transmit interrupt
+ - description: CAN0 transmit/receive FIFO receive completion interrupt
+ - description: CAN1 error interrupt
+ - description: CAN1 transmit interrupt
+ - description: CAN1 transmit/receive FIFO receive completion interrupt
+
+ interrupt-names:
+ items:
+ - const: g_err
+ - const: g_recc
+ - const: ch0_err
+ - const: ch0_rec
+ - const: ch0_trx
+ - const: ch1_err
+ - const: ch1_rec
+ - const: ch1_trx
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: rstp_n
+ - const: rstc_n
+
+ required:
+ - reset-names
+else:
+ properties:
+ interrupts:
+ items:
+ - description: Channel interrupt
+ - description: Global interrupt
+
+ interrupt-names:
+ items:
+ - const: ch_int
+ - const: g_int
+
+ resets:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ canfd: can@e66c0000 {
+ compatible = "renesas,r8a7795-canfd",
+ "renesas,rcar-gen3-canfd";
+ reg = <0xe66c0000 0x8000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
+ clocks = <&cpg CPG_MOD 914>,
+ <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
+
+ channel0 {
+ };
+
+ channel1 {
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
new file mode 100644
index 000000000..e3501bfa2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -0,0 +1,40 @@
+Texas Instruments TCAN4x5x CAN Controller
+================================================
+
+This file provides device node information for the TCAN4x5x interface contains.
+
+Required properties:
+ - compatible: "ti,tcan4x5x"
+ - reg: 0
+ - #address-cells: 1
+ - #size-cells: 0
+ - spi-max-frequency: Maximum frequency of the SPI bus the chip can
+ operate at should be less than or equal to 18 MHz.
+ - interrupt-parent: the phandle to the interrupt controller which provides
+ the interrupt.
+ - interrupts: interrupt specification for data-ready.
+
+See Documentation/devicetree/bindings/net/can/bosch,m_can.yaml for additional
+required property details.
+
+Optional properties:
+ - reset-gpios: Hardwired output GPIO. If not defined then software
+ reset.
+ - device-state-gpios: Input GPIO that indicates if the device is in
+ a sleep state or if the device is active.
+ - device-wake-gpios: Wake up GPIO to wake up the TCAN device.
+
+Example:
+tcan4x5x: tcan4x5x@0 {
+ compatible = "ti,tcan4x5x";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <10000000>;
+ bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+ device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/net/can/ti_hecc.txt b/Documentation/devicetree/bindings/net/can/ti_hecc.txt
new file mode 100644
index 000000000..e0f0a7cfe
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ti_hecc.txt
@@ -0,0 +1,32 @@
+Texas Instruments High End CAN Controller (HECC)
+================================================
+
+This file provides information, what the device node
+for the hecc interface contains.
+
+Required properties:
+- compatible: "ti,am3517-hecc"
+- reg: addresses and lengths of the register spaces for 'hecc', 'hecc-ram'
+ and 'mbx'
+- reg-names :"hecc", "hecc-ram", "mbx"
+- interrupts: interrupt mapping for the hecc interrupts sources
+- clocks: clock phandles (see clock bindings for details)
+
+Optional properties:
+- ti,use-hecc1int: if provided configures HECC to produce all interrupts
+ on HECC1INT interrupt line. By default HECC0INT interrupt
+ line will be used.
+- xceiver-supply: regulator that powers the CAN transceiver
+
+Example:
+
+For am3517evm board:
+ hecc: can@5c050000 {
+ compatible = "ti,am3517-hecc";
+ reg = <0x5c050000 0x80>,
+ <0x5c053000 0x180>,
+ <0x5c052000 0x200>;
+ reg-names = "hecc", "hecc-ram", "mbx";
+ interrupts = <24>;
+ clocks = <&hecc_ck>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
new file mode 100644
index 000000000..65af8183c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/xilinx,can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Xilinx Axi CAN/Zynq CANPS controller
+
+maintainers:
+ - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
+
+properties:
+ compatible:
+ enum:
+ - xlnx,zynq-can-1.0
+ - xlnx,axi-can-1.00.a
+ - xlnx,canfd-1.0
+ - xlnx,canfd-2.0
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ maxItems: 2
+
+ power-domains:
+ maxItems: 1
+
+ tx-fifo-depth:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: CAN Tx fifo depth (Zynq, Axi CAN).
+
+ rx-fifo-depth:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: CAN Rx fifo depth (Zynq, Axi CAN, CAN FD in sequential Rx mode)
+
+ tx-mailbox-count:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: CAN Tx mailbox buffer count (CAN FD)
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: can-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,zynq-can-1.0
+
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: can_clk
+ - const: pclk
+ required:
+ - tx-fifo-depth
+ - rx-fifo-depth
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,axi-can-1.00.a
+
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: can_clk
+ - const: s_axi_aclk
+ required:
+ - tx-fifo-depth
+ - rx-fifo-depth
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,canfd-1.0
+ - xlnx,canfd-2.0
+
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: can_clk
+ - const: s_axi_aclk
+ required:
+ - tx-mailbox-count
+ - rx-fifo-depth
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ can@e0008000 {
+ compatible = "xlnx,zynq-can-1.0";
+ reg = <0xe0008000 0x1000>;
+ clocks = <&clkc 19>, <&clkc 36>;
+ clock-names = "can_clk", "pclk";
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
+
+ - |
+ can@40000000 {
+ compatible = "xlnx,axi-can-1.00.a";
+ reg = <0x40000000 0x10000>;
+ clocks = <&clkc 0>, <&clkc 1>;
+ clock-names = "can_clk", "s_axi_aclk";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
+
+ - |
+ can@40000000 {
+ compatible = "xlnx,canfd-1.0";
+ reg = <0x40000000 0x2000>;
+ clocks = <&clkc 0>, <&clkc 1>;
+ clock-names = "can_clk", "s_axi_aclk";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+ tx-mailbox-count = <0x20>;
+ rx-fifo-depth = <0x20>;
+ };
+
+ - |
+ can@ff060000 {
+ compatible = "xlnx,canfd-2.0";
+ reg = <0xff060000 0x6000>;
+ clocks = <&clkc 0>, <&clkc 1>;
+ clock-names = "can_clk", "s_axi_aclk";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+ tx-mailbox-count = <0x20>;
+ rx-fifo-depth = <0x40>;
+ };