diff options
Diffstat (limited to 'Documentation/devicetree/bindings/nvmem')
36 files changed, 1925 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml new file mode 100644 index 000000000..14c170c6a --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/allwinner,sun4i-a10-sid.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Security ID + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-sid + - const: allwinner,sun7i-a20-sid + - const: allwinner,sun8i-a83t-sid + - const: allwinner,sun8i-h3-sid + - const: allwinner,sun20i-d1-sid + - const: allwinner,sun50i-a64-sid + - items: + - const: allwinner,sun50i-a100-sid + - const: allwinner,sun50i-a64-sid + - const: allwinner,sun50i-h5-sid + - const: allwinner,sun50i-h6-sid + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + efuse@1c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10>; + }; + + - | + efuse@1c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt new file mode 100644 index 000000000..f7b3ed74d --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -0,0 +1,48 @@ += Amlogic Meson GX eFuse device tree bindings = + +Required properties: +- compatible: should be "amlogic,meson-gxbb-efuse" +- clocks: phandle to the efuse peripheral clock provided by the + clock controller. +- secure-monitor: phandle to the secure-monitor node + += Data cells = +Are child nodes of eFuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; + #address-cells = <1>; + #size-cells = <1>; + secure-monitor = <&sm>; + + sn: sn@14 { + reg = <0x14 0x10>; + }; + + eth_mac: eth_mac@34 { + reg = <0x34 0x10>; + }; + + bid: bid@46 { + reg = <0x46 0x30>; + }; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + + eth_mac { + ... + nvmem-cells = <ð_mac>; + nvmem-cell-names = "eth_mac"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt new file mode 100644 index 000000000..a3c63954a --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt @@ -0,0 +1,22 @@ +Amlogic Meson6/Meson8/Meson8b efuse + +Required Properties: +- compatible: depending on the SoC this should be one of: + - "amlogic,meson6-efuse" + - "amlogic,meson8-efuse" + - "amlogic,meson8b-efuse" +- reg: base address and size of the efuse registers +- clocks: a reference to the efuse core gate clock +- clock-names: must be "core" + +All properties and sub-nodes as well as the consumer bindings +defined in nvmem.txt in this directory are also supported. + + +Example: + efuse: nvmem@0 { + compatible = "amlogic,meson8-efuse"; + reg = <0x0 0x2000>; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml new file mode 100644 index 000000000..5ec8f2bdb --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/apple,efuses.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SoC eFuse-based NVMEM + +description: | + Apple SoCs such as the M1 contain factory-programmed eFuses used to e.g. store + calibration data for the PCIe and the Type-C PHY or unique chip identifiers + such as the ECID. + +maintainers: + - Sven Peter <sven@svenpeter.dev> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + items: + - enum: + - apple,t8103-efuses + - apple,t6000-efuses + - const: apple,efuses + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + efuse@3d2bc000 { + compatible = "apple,t8103-efuses", "apple,efuses"; + reg = <0x3d2bc000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ecid: efuse@500 { + reg = <0x500 0x8>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml new file mode 100644 index 000000000..25033de3e --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/brcm,nvram.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom's NVRAM + +description: | + Broadcom's NVRAM is a structure containing device specific environment + variables. It is used for storing device configuration, booting parameters + and calibration data. + + NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9 + devices usiong I/O mapped memory. + + NVRAM variables can be defined as NVMEM device subnodes. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + const: brcm,nvram + + reg: + maxItems: 1 + + board_id: + type: object + description: Board identification name + + et0macaddr: + type: object + description: First Ethernet interface's MAC address + + et1macaddr: + type: object + description: Second Ethernet interface's MAC address + + et2macaddr: + type: object + description: Third Ethernet interface's MAC address + +unevaluatedProperties: false + +examples: + - | + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + mac: et0macaddr { + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt new file mode 100644 index 000000000..0415265c2 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt @@ -0,0 +1,17 @@ +Broadcom OTP memory controller + +Required Properties: +- compatible: "brcm,ocotp" for the first generation Broadcom OTPC which is used + in Cygnus and supports 32 bit read/write. Use "brcm,ocotp-v2" for the second + generation Broadcom OTPC which is used in SoC's such as Stingray and supports + 64-bit read/write. +- reg: Base address of the OTP controller. +- brcm,ocotp-size: Amount of memory available, in 32 bit words + +Example: + +otp: otp@301c800 { + compatible = "brcm,ocotp"; + reg = <0x0301c800 0x2c>; + brcm,ocotp-size = <2048>; +}; diff --git a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml new file mode 100644 index 000000000..3b4e6e94c --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/fsl,layerscape-sfp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Security Fuse Processor + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + SFP is the security fuse processor which among other things provides a + unique identifier per part. + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + oneOf: + - description: Trust architecture 2.1 SFP + items: + - const: fsl,ls1021a-sfp + - description: Trust architecture 3.0 SFP + items: + - const: fsl,ls1028a-sfp + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: + The SFP clock. Typically, this is the platform clock divided by 4. + + clock-names: + const: sfp + + ta-prog-sfp-supply: + description: + The regulator for the TA_PROG_SFP pin. It will be enabled for programming + and disabled for reading. + +required: + - compatible + - reg + - clock-names + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/fsl,qoriq-clockgen.h> + efuse@1e80000 { + compatible = "fsl,ls1028a-sfp"; + reg = <0x1e80000 0x8000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml new file mode 100644 index 000000000..682688299 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/fsl,scu-ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - OCOTP bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + enum: + - fsl,imx8qm-scu-ocotp + - fsl,imx8qxp-scu-ocotp + +patternProperties: + '^mac@[0-9a-f]*$': + type: object + description: + MAC address. + + properties: + reg: + description: + Byte offset within OCOTP where the MAC address is stored + maxItems: 1 + + required: + - reg + + additionalProperties: false + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 6>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml new file mode 100644 index 000000000..7aac1995c --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/imx-iim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX IC Identification Module (IIM) + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: | + This binding represents the IC Identification Module (IIM) found on + i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs. + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - fsl,imx25-iim + - fsl,imx27-iim + - fsl,imx31-iim + - fsl,imx35-iim + - fsl,imx51-iim + - fsl,imx53-iim + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + + iim: efuse@63f98000 { + compatible = "fsl,imx53-iim"; + reg = <0x63f98000 0x4000>; + interrupts = <69>; + clocks = <&clks IMX5_CLK_IIM_GATE>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml new file mode 100644 index 000000000..d0a239d7e --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 On-Chip OTP Controller (OCOTP) + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: | + This binding represents the on-chip eFuse OTP controller found on + i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, + i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs. + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx6q-ocotp + - fsl,imx6sl-ocotp + - fsl,imx6sx-ocotp + - fsl,imx6ul-ocotp + - fsl,imx6ull-ocotp + - fsl,imx7d-ocotp + - fsl,imx6sll-ocotp + - fsl,imx7ulp-ocotp + - fsl,imx8mq-ocotp + - fsl,imx8mm-ocotp + - const: syscon + - items: + - enum: + - fsl,imx8mn-ocotp + # i.MX8MP not really compatible with fsl,imx8mm-ocotp, however + # the code for getting SoC revision depends on fsl,imx8mm-ocotp + # compatible. + - fsl,imx8mp-ocotp + - const: fsl,imx8mm-ocotp + - const: syscon + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + clocks: + maxItems: 1 + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + + properties: + reg: + maxItems: 1 + description: + Offset and size in bytes within the storage device. + + required: + - reg + + additionalProperties: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6sx-clock.h> + + ocotp: efuse@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sx-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCOTP>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml new file mode 100644 index 000000000..bf8476822 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/ingenic,jz4780-efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ EFUSE driver bindings + +maintainers: + - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - ingenic,jz4780-efuse + + reg: + maxItems: 1 + + clocks: + # Handle for the ahb for the efuse. + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/ingenic,jz4780-cgu.h> + + efuse@134100d0 { + compatible = "ingenic,jz4780-efuse"; + reg = <0x134100d0 0x2c>; + + clocks = <&cgu JZ4780_CLK_AHB2>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt b/Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt new file mode 100644 index 000000000..853b6a754 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt @@ -0,0 +1,20 @@ +* NXP LPC18xx OTP memory + +Internal OTP (One Time Programmable) memory for NXP LPC18xx/43xx devices. + +Required properties: + - compatible: Should be "nxp,lpc1850-otp" + - reg: Must contain an entry with the physical base address and length + for each entry in reg-names. + - address-cells: must be set to 1. + - size-cells: must be set to 1. + +See nvmem.txt for more information. + +Example: + otp: otp@40045000 { + compatible = "nxp,lpc1850-otp"; + reg = <0x40045000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt b/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt new file mode 100644 index 000000000..809df68f6 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt @@ -0,0 +1,28 @@ +* NXP LPC18xx EEPROM memory NVMEM driver + +Required properties: + - compatible: Should be "nxp,lpc1857-eeprom" + - reg: Must contain an entry with the physical base address and length + for each entry in reg-names. + - reg-names: Must include the following entries. + - reg: EEPROM registers. + - mem: EEPROM address space. + - clocks: Must contain an entry for each entry in clock-names. + - clock-names: Must include the following entries. + - eeprom: EEPROM operating clock. + - resets: Should contain a reference to the reset controller asserting + the EEPROM in reset. + - interrupts: Should contain EEPROM interrupt. + +Example: + + eeprom: eeprom@4000e000 { + compatible = "nxp,lpc1857-eeprom"; + reg = <0x4000e000 0x1000>, + <0x20040000 0x4000>; + reg-names = "reg", "mem"; + clocks = <&ccu1 CLK_CPU_EEPROM>; + clock-names = "eeprom"; + resets = <&rgu 27>; + interrupts = <4>; + }; diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml new file mode 100644 index 000000000..75e0a516e --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/mediatek,efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek efuse + +description: | + MediaTek's efuse is used for storing calibration data, it can be accessed + on ARM devices usiong I/O mapped memory. + +maintainers: + - Andrew-CT Chen <andrew-ct.chen@mediatek.com> + - Lala Lin <lala.lin@mediatek.com> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + $nodename: + pattern: "^efuse@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - enum: + - mediatek,mt7622-efuse + - mediatek,mt7623-efuse + - mediatek,mt8173-efuse + - mediatek,mt8183-efuse + - mediatek,mt8186-efuse + - mediatek,mt8188-efuse + - mediatek,mt8192-efuse + - mediatek,mt8195-efuse + - mediatek,mt8516-efuse + - const: mediatek,efuse + - const: mediatek,mt8173-efuse + deprecated: true + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + efuse@11c10000 { + compatible = "mediatek,mt8195-efuse", "mediatek,efuse"; + reg = <0x11c10000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + u3_tx_imp_p0: usb3-tx-imp@184,1 { + reg = <0x184 0x1>; + bits = <0 5>; + }; + u3_rx_imp_p0: usb3-rx-imp@184,2 { + reg = <0x184 0x2>; + bits = <5 5>; + }; + u3_intr_p0: usb3-intr@185 { + reg = <0x185 0x1>; + bits = <2 6>; + }; + comb_tx_imp_p1: usb3-tx-imp@186,1 { + reg = <0x186 0x1>; + bits = <0 5>; + }; + comb_rx_imp_p1: usb3-rx-imp@186,2 { + reg = <0x186 0x2>; + bits = <5 5>; + }; + comb_intr_p1: usb3-intr@187 { + reg = <0x187 0x1>; + bits = <2 6>; + }; + u2_intr_p0: usb2-intr-p0@188,1 { + reg = <0x188 0x1>; + bits = <0 5>; + }; + u2_intr_p1: usb2-intr-p1@188,2 { + reg = <0x188 0x2>; + bits = <5 5>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml new file mode 100644 index 000000000..f97c6beb4 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/microchip,lan9662-otpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip LAN9662 OTP Controller (OTPC) + +maintainers: + - Horatiu Vultur <horatiu.vultur@microchip.com> + +description: | + OTP controller drives a NVMEM memory where system specific data + (e.g. hardware configuration settings, chip identifiers) or + user specific data could be stored. + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + oneOf: + - items: + - const: microchip,lan9668-otpc + - const: microchip,lan9662-otpc + - enum: + - microchip,lan9662-otpc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + otpc: otp@e0021000 { + compatible = "microchip,lan9662-otpc"; + reg = <0xe0021000 0x300>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml new file mode 100644 index 000000000..c3c96fd0b --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/microchip,sama7g5-otpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip SAMA7G5 OTP Controller (OTPC) + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: | + OTP controller drives a NVMEM memory where system specific data + (e.g. calibration data for analog cells, hardware configuration + settings, chip identifiers) or user specific data could be stored. + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + items: + - const: microchip,sama7g5-otpc + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h> + + otpc: efuse@e8c00000 { + compatible = "microchip,sama7g5-otpc", "syscon"; + reg = <0xe8c00000 0xec>; + #address-cells = <1>; + #size-cells = <1>; + + temperature_calib: calib@1 { + reg = <OTP_PKT(1) 76>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml new file mode 100644 index 000000000..2e1fcff3c --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/mxs-ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: On-Chip OTP Memory for Freescale i.MX23/i.MX28 + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + items: + - enum: + - fsl,imx23-ocotp + - fsl,imx28-ocotp + - const: fsl,ocotp + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + ocotp: efuse@8002c000 { + compatible = "fsl,imx28-ocotp", "fsl,ocotp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8002c000 0x2000>; + clocks = <&clks 25>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml new file mode 100644 index 000000000..f93bc50c4 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nintendo-otp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nintendo Wii and Wii U OTP + +description: | + This binding represents the OTP memory as found on a Nintendo Wii or Wii U, + which contains common and per-console keys, signatures and related data + required to access peripherals. + + See https://wiiubrew.org/wiki/Hardware/OTP + +maintainers: + - Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - nintendo,hollywood-otp + - nintendo,latte-otp + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + otp@d8001ec { + compatible = "nintendo,latte-otp"; + reg = <0x0d8001ec 0x8>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml new file mode 100644 index 000000000..a26633bf5 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nvmem-consumer.yaml# +$schema: http://devicetree.org/meta-schemas/base.yaml# + +title: NVMEM (Non Volatile Memory) Consumer + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +select: true + +properties: + nvmem: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of phandle to the nvmem providers. + + nvmem-cells: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of phandle to the nvmem data cells. + + nvmem-names: + description: + Names for the each nvmem provider. + + nvmem-cell-names: + description: + Names for each nvmem-cells specified. + +dependencies: + nvmem-names: [ nvmem ] + nvmem-cell-names: [ nvmem-cells ] + +additionalProperties: true + +examples: + - | + tsens { + /* ... */ + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt new file mode 100644 index 000000000..46a7ef485 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -0,0 +1 @@ +This file has been moved to nvmem.yaml and nvmem-consumer.yaml. diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml new file mode 100644 index 000000000..1eb22dba3 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nvmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVMEM (Non Volatile Memory) + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding is intended to represent the location of hardware + configuration data stored in NVMEMs like eeprom, efuses and so on. + + On a significant proportion of boards, the manufacturer has stored + some data on NVMEM, for the OS to be able to retrieve these + information and act upon it. Obviously, the OS has to know about + where to retrieve these data from, and where they are stored on the + storage device. + +properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + read-only: + $ref: /schemas/types.yaml#/definitions/flag + description: + Mark the provider as read only. + + wp-gpios: + description: + GPIO to which the write-protect pin of the chip is connected. + The write-protect GPIO is asserted, when it's driven high + (logical '1') to block the write operation. It's deasserted, + when it's driven low (logical '0') to allow writing. + maxItems: 1 + +patternProperties: + "@[0-9a-f]+(,[0-7])?$": + type: object + + properties: + reg: + maxItems: 1 + description: + Offset and size in bytes within the storage device. + + bits: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - minimum: 0 + maximum: 7 + description: + Offset in bit within the address range specified by reg. + - minimum: 1 + description: + Size in bit within the address range specified by reg. + +additionalProperties: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + qfprom: eeprom@700000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00700000 0x100000>; + + wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + + /* ... */ + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_calibration_bckp: calib_bckp@504 { + reg = <0x504 0x11>; + bits = <6 128>; + }; + + pvs_version: pvs-version@6 { + reg = <0x6 0x2>; + bits = <7 2>; + }; + + speed_bin: speed-bin@c{ + reg = <0xc 0x1>; + bits = <2 3>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml new file mode 100644 index 000000000..2eab2f46c --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies Inc, QFPROM Efuse bindings + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + items: + - enum: + - qcom,apq8064-qfprom + - qcom,apq8084-qfprom + - qcom,ipq8064-qfprom + - qcom,msm8974-qfprom + - qcom,msm8916-qfprom + - qcom,msm8996-qfprom + - qcom,msm8998-qfprom + - qcom,qcs404-qfprom + - qcom,sc7180-qfprom + - qcom,sc7280-qfprom + - qcom,sdm630-qfprom + - qcom,sdm845-qfprom + - qcom,sm6115-qfprom + - const: qcom,qfprom + + reg: + # If the QFPROM is read-only OS image then only the corrected region + # needs to be provided. If the QFPROM is writable then all 4 regions + # must be provided. + oneOf: + - items: + - description: The corrected region. + - items: + - description: The corrected region. + - description: The raw region. + - description: The config region. + - description: The security control region. + + # Clock must be provided if QFPROM is writable from the OS image. + clocks: + maxItems: 1 + clock-names: + const: core + + # Supply reference must be provided if QFPROM is writable from the OS image. + vcc-supply: + description: Our power supply. + + power-domains: + maxItems: 1 + + # Needed if any child nodes are present. + "#address-cells": + const: 1 + "#size-cells": + const: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + efuse@784000 { + compatible = "qcom,sc7180-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>, + <0 0x00780000 0 0x7a0>, + <0 0x00782000 0 0x100>, + <0 0x00786000 0 0x1fff>; + clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <1>; + + vcc-supply = <&vreg_l11a_1p8>; + + hstx-trim-primary@25b { + reg = <0x25b 0x1>; + bits = <1 3>; + }; + }; + }; + + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + efuse@784000 { + compatible = "qcom,sdm845-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + hstx-trim-primary@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml new file mode 100644 index 000000000..ee79e13b5 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/qcom,spmi-sdam.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SPMI SDAM DT bindings + +maintainers: + - Shyam Kumar Thella <sthella@codeaurora.org> + +description: | + The SDAM provides scratch register space for the PMIC clients. This + memory can be used by software to store information or communicate + to/from the PBUS. + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - qcom,spmi-sdam + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +required: + - compatible + - reg + - ranges + +unevaluatedProperties: false + +examples: + - | + sdam_1: nvram@b000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,spmi-sdam"; + reg = <0xb000 0x100>; + ranges = <0 0xb000 0x100>; + + /* Data cells */ + restart_reason: restart@50 { + reg = <0x50 0x1>; + bits = <6 2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml new file mode 100644 index 000000000..a4a755dcf --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/rmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Reserved Memory Based nvmem Device + +maintainers: + - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + items: + - enum: + - raspberrypi,bootloader-config + - const: nvmem-rmem + + reg: + maxItems: 1 + + no-map: + $ref: /schemas/types.yaml#/definitions/flag + description: + Avoid creating a virtual mapping of the region as part of the OS' + standard mapping of system memory. + +required: + - compatible + - no-map + +unevaluatedProperties: false + +examples: + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + + blconfig: nvram@10000000 { + compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10000000 0x1000>; + no-map; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml new file mode 100644 index 000000000..febee8129 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/rockchip-efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip eFuse + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - rockchip,rk3066a-efuse + - rockchip,rk3188-efuse + - rockchip,rk3228-efuse + - rockchip,rk3288-efuse + - rockchip,rk3328-efuse + - rockchip,rk3368-efuse + - rockchip,rk3399-efuse + + # Deprecated: old compatible value for rk3066a, rk3188 and rk3288 + - rockchip,rockchip-efuse + + reg: + description: + Registers location and eFuse size. + maxItems: 1 + + clocks: + description: + eFuse clock id. + maxItems: 1 + + clock-names: + const: pclk_efuse + + rockchip,efuse-size: + description: + eFuse size in bytes. The eFuse size in property <reg> will be invalid if + this property is defined. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + efuse: efuse@ffb40000 { + compatible = "rockchip,rk3288-efuse"; + reg = <0xffb40000 0x20>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE256>; + clock-names = "pclk_efuse"; + + /* Data cells */ + cpu_leakage: cpu_leakage@17 { + reg = <0x17 0x1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt b/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt new file mode 100644 index 000000000..40f649f7c --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt @@ -0,0 +1,25 @@ +Rockchip internal OTP (One Time Programmable) memory device tree bindings + +Required properties: +- compatible: Should be one of the following. + - "rockchip,px30-otp" - for PX30 SoCs. + - "rockchip,rk3308-otp" - for RK3308 SoCs. +- reg: Should contain the registers location and size +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Should be "otp", "apb_pclk" and "phy". +- resets: Must contain an entry for each entry in reset-names. + See ../../reset/reset.txt for details. +- reset-names: Should be "phy". + +See nvmem.txt for more information. + +Example: + otp: otp@ff290000 { + compatible = "rockchip,px30-otp"; + reg = <0x0 0xff290000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>, + <&cru PCLK_OTP_PHY>; + clock-names = "otp", "apb_pclk", "phy"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt new file mode 100644 index 000000000..586c08286 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt @@ -0,0 +1,52 @@ += Spreadtrum SC27XX PMIC eFuse device tree bindings = + +Required properties: +- compatible: Should be one of the following. + "sprd,sc2720-efuse" + "sprd,sc2721-efuse" + "sprd,sc2723-efuse" + "sprd,sc2730-efuse" + "sprd,sc2731-efuse" +- reg: Specify the address offset of efuse controller. +- hwlocks: Reference to a phandle of a hwlock provider node. + += Data cells = +Are child nodes of eFuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + efuse@380 { + compatible = "sprd,sc2731-efuse"; + reg = <0x380>; + #address-cells = <1>; + #size-cells = <1>; + hwlocks = <&hwlock 12>; + + /* Data cells */ + thermal_calib: calib@10 { + reg = <0x10 0x2>; + }; + }; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +Example: + + thermal { + ... + nvmem-cells = <&thermal_calib>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml new file mode 100644 index 000000000..e374aa789 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/snvs-lpgpr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Low Power General Purpose Register found in i.MX Secure Non-Volatile Storage + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +properties: + compatible: + enum: + - fsl,imx6q-snvs-lpgpr + - fsl,imx6ul-snvs-lpgpr + - fsl,imx7d-snvs-lpgpr + - fsl,imx8mm-snvs-lpgpr + - fsl,imx8mn-snvs-lpgpr + - fsl,imx8mp-snvs-lpgpr + - fsl,imx8mq-snvs-lpgpr + +required: + - compatible + +additionalProperties: false + +examples: + - | + snvs@20cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x20cc000 0x4000>; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx6q-snvs-lpgpr"; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml new file mode 100644 index 000000000..2578e39de --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/socionext,uniphier-efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier eFuse bindings + +maintainers: + - Keiji Hayashibara <hayashibara.keiji@socionext.com> + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + const: socionext,uniphier-efuse + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + // The UniPhier eFuse should be a subnode of a "soc-glue" node. + + soc-glue@5f900000 { + compatible = "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + usb_rterm0: trim@54,4 { + reg = <0x54 1>; + bits = <4 2>; + }; + usb_rterm1: trim@55,4 { + reg = <0x55 1>; + bits = <4 2>; + }; + usb_rterm2: trim@58,4 { + reg = <0x58 1>; + bits = <4 2>; + }; + usb_rterm3: trim@59,4 { + reg = <0x59 1>; + bits = <4 2>; + }; + usb_sel_t0: trim@54,0 { + reg = <0x54 1>; + bits = <0 4>; + }; + usb_sel_t1: trim@55,0 { + reg = <0x55 1>; + bits = <0 4>; + }; + usb_sel_t2: trim@58,0 { + reg = <0x58 1>; + bits = <0 4>; + }; + usb_sel_t3: trim@59,0 { + reg = <0x59 1>; + bits = <0 4>; + }; + usb_hs_i0: trim@56,0 { + reg = <0x56 1>; + bits = <0 4>; + }; + usb_hs_i2: trim@5a,0 { + reg = <0x5a 1>; + bits = <0 4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/sprd-efuse.txt b/Documentation/devicetree/bindings/nvmem/sprd-efuse.txt new file mode 100644 index 000000000..96b6feec2 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/sprd-efuse.txt @@ -0,0 +1,39 @@ += Spreadtrum eFuse device tree bindings = + +Required properties: +- compatible: Should be "sprd,ums312-efuse". +- reg: Specify the address offset of efuse controller. +- clock-names: Should be "enable". +- clocks: The phandle and specifier referencing the controller's clock. +- hwlocks: Reference to a phandle of a hwlock provider node. + += Data cells = +Are child nodes of eFuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + ap_efuse: efuse@32240000 { + compatible = "sprd,ums312-efuse"; + reg = <0 0x32240000 0 0x10000>; + clock-names = "enable"; + hwlocks = <&hwlock 8>; + clocks = <&aonapb_gate CLK_EFUSE_EB>; + + /* Data cells */ + thermal_calib: calib@10 { + reg = <0x10 0x2>; + }; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +Example: + + thermal { + ... + + nvmem-cells = <&thermal_calib>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml new file mode 100644 index 000000000..448a2678d --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/st,stm32-romem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Factory-programmed data bindings + +description: | + This represents STM32 Factory-programmed read only non-volatile area: locked + flash, OTP, read-only HW regs... This contains various information such as: + analog calibration data for temperature sensor (e.g. TS_CAL1, TS_CAL2), + internal vref (VREFIN_CAL), unique device ID... + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@foss.st.com> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - st,stm32f4-otp + - st,stm32mp15-bsec + + reg: + maxItems: 1 + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + + properties: + st,non-secure-otp: + description: | + This property explicits a factory programmed area that both secure + and non-secure worlds can access. It is needed when, by default, the + related area can only be reached by the secure world. + type: boolean + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + efuse@1fff7800 { + compatible = "st,stm32f4-otp"; + reg = <0x1fff7800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + calib@22c { + reg = <0x22c 0x2>; + }; + + mac_addr@e4 { + reg = <0xe4 0x8>; + st,non-secure-otp; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml new file mode 100644 index 000000000..a7644ebbc --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/sunplus,sp7021-ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: On-Chip OTP Memory for Sunplus SP7021 + +maintainers: + - Vincent Shih <vincent.sunplus@gmail.com> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + const: sunplus,sp7021-ocotp + + reg: + maxItems: 2 + + reg-names: + items: + - const: hb_gpio + - const: otprx + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + thermal-calibration: + type: object + description: thermal calibration values + + disconnect-voltage: + type: object + description: disconnect voltages of usb2 port 0 and port 1 + + mac-address0: + type: object + description: MAC address of ethernet port 0 + + mac-address1: + type: object + description: MAC address of ethernet port 1 + +required: + - compatible + - reg + - reg-names + - clocks + +unevaluatedProperties: false + +examples: + - | + otp: otp@9c00af00 { + compatible = "sunplus,sp7021-ocotp"; + reg = <0x9c00af00 0x34>, <0x9c00af80 0x58>; + reg-names = "hb_gpio", "otprx"; + clocks = <&clkc 0x15>; + + #address-cells = <1>; + #size-cells = <1>; + therm_calib: thermal-calibration@14 { + reg = <0x14 0x3>; + }; + disc_vol: disconnect-voltage@18 { + reg = <0x18 0x2>; + }; + mac_addr0: mac-address0@34 { + reg = <0x34 0x6>; + }; + mac_addr1: mac-address1@3a { + reg = <0x3a 0x6>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml new file mode 100644 index 000000000..e96bca99f --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/u-boot,env.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: U-Boot environment variables + +description: | + U-Boot uses environment variables to store device parameters and + configuration. They may be used for booting process, setup or keeping end user + info. + + Data is stored using U-Boot specific formats (variant specific header and NUL + separated key-value pairs). + + Environment data can be stored on various storage entities, e.g.: + 1. Raw flash partition + 2. UBI volume + + This binding allows marking storage device (as containing env data) and + specifying used format. + + Right now only flash partition case is covered but it may be extended to e.g. + UBI volumes in the future. + + Variables can be defined as NVMEM device subnodes. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + oneOf: + - description: A standalone env data block + const: u-boot,env + - description: Two redundant blocks with active one flagged + const: u-boot,env-redundant-bool + - description: Two redundant blocks with active having higher counter + const: u-boot,env-redundant-count + + reg: + maxItems: 1 + + bootcmd: + type: object + description: Command to use for automatic booting + + ethaddr: + type: object + description: Ethernet interface's MAC address + +additionalProperties: false + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x40000>; + label = "u-boot"; + read-only; + }; + + env: partition@40000 { + compatible = "u-boot,env"; + reg = <0x40000 0x10000>; + + mac: ethaddr { + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt new file mode 100644 index 000000000..72ba628f6 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt @@ -0,0 +1,19 @@ +On-Chip OTP Memory for Freescale Vybrid + +Required Properties: + compatible: + - "fsl,vf610-ocotp", "syscon" for VF5xx/VF6xx + #address-cells : Should be 1 + #size-cells : Should be 1 + reg : Address and length of OTP controller and fuse map registers + clocks : ipg clock we associate with the OCOTP peripheral + +Example for Vybrid VF5xx/VF6xx: + + ocotp: ocotp@400a5000 { + compatible = "fsl,vf610-ocotp", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x400a5000 0xCF0>; + clocks = <&clks VF610_CLK_OCOTP>; + }; diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt new file mode 100644 index 000000000..4881561b3 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt @@ -0,0 +1,46 @@ +-------------------------------------------------------------------------- += Zynq UltraScale+ MPSoC nvmem firmware driver binding = +-------------------------------------------------------------------------- +The nvmem_firmware node provides access to the hardware related data +like soc revision, IDCODE... etc, By using the firmware interface. + +Required properties: +- compatible: should be "xlnx,zynqmp-nvmem-fw" + += Data cells = +Are child nodes of silicon id, bindings of which as described in +bindings/nvmem/nvmem.txt + +------- + Example +------- +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + nvmem_firmware { + compatible = "xlnx,zynqmp-nvmem-fw"; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + soc_revision: soc_revision { + reg = <0x0 0x4>; + }; + }; + }; +}; + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + pcap { + ... + + nvmem-cells = <&soc_revision>; + nvmem-cell-names = "soc_revision"; + + ... + }; diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt new file mode 100644 index 000000000..0df79d9e0 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt @@ -0,0 +1,40 @@ +Zodiac Inflight Innovations RAVE EEPROM Bindings + +RAVE SP EEPROM device is a "MFD cell" device exposing physical EEPROM +attached to RAVE Supervisory Processor. It is expected that its Device +Tree node is specified as a child of the node corresponding to the +parent RAVE SP device (as documented in +Documentation/devicetree/bindings/mfd/zii,rave-sp.txt) + +Required properties: + +- compatible: Should be "zii,rave-sp-eeprom" + +Optional properties: + +- zii,eeprom-name: Unique EEPROM identifier describing its function in the + system. Will be used as created NVMEM deivce's name. + +Data cells: + +Data cells are child nodes of eerpom node, bindings for which are +documented in Documentation/devicetree/bindings/nvmem/nvmem.txt + +Example: + + rave-sp { + compatible = "zii,rave-sp-rdu1"; + current-speed = <38400>; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + + wdt_timeout: wdt-timeout@81 { + reg = <0x81 2>; + }; + }; + } |