diff options
Diffstat (limited to 'Documentation/devicetree/bindings/scsi/hisilicon-sas.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt new file mode 100644 index 000000000..8c6659ed2 --- /dev/null +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt @@ -0,0 +1,98 @@ +* HiSilicon SAS controller + +The HiSilicon SAS controller supports SAS/SATA. + +Main node required properties: + - compatible : value should be as follows: + (a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset + (b) "hisilicon,hip06-sas-v2" for v2 hw in hip06 chipset + (c) "hisilicon,hip07-sas-v2" for v2 hw in hip07 chipset + - sas-addr : array of 8 bytes for host SAS address + - reg : Contains two regions. The first is the address and length of the SAS + register. The second is the address and length of CPLD register for + SGPIO control. The second is optional, and should be set only when + we use a CPLD for directly attached disk LED control. + - hisilicon,sas-syscon: phandle of syscon used for sas control + - ctrl-reset-reg : offset to controller reset register in ctrl reg + - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg + - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg + - queue-count : number of delivery and completion queues in the controller + - phy-count : number of phys accessible by the controller + - interrupts : For v1 hw: Interrupts for phys, completion queues, and fatal + sources; the interrupts are ordered in 3 groups, as follows: + - Phy interrupts + - Completion queue interrupts + - Fatal interrupts + Phy interrupts : Each phy has 3 interrupt sources: + - broadcast + - phyup + - abnormal + The phy interrupts are ordered into groups of 3 per phy + (broadcast, phyup, and abnormal) in increasing order. + Completion queue interrupts : each completion queue has 1 + interrupt source. + The interrupts are ordered in increasing order. + Fatal interrupts : the fatal interrupts are ordered as follows: + - ECC + - AXI bus + For v2 hw: Interrupts for phys, Sata, and completion queues; + the interrupts are ordered in 3 groups, as follows: + - Phy interrupts + - Sata interrupts + - Completion queue interrupts + Phy interrupts : Each controller has 2 phy interrupts: + - phy up/down + - channel interrupt + Sata interrupts : Each phy on the controller has 1 Sata + interrupt. The interrupts are ordered in increasing + order. + Completion queue interrupts : each completion queue has 1 + interrupt source. The interrupts are ordered in + increasing order. + +Optional main node properties: + - hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the + "am-max-transmissions" limitation. + - hisilicon,signal-attenuation : array of 3 32-bit values, containing de-emphasis, + preshoot, and boost attenuation readings for the board. They + are used to describe the signal attenuation of the board. These + values' range is 7600 to 12400, and used to represent -24dB to + 24dB. + The formula is "y = (x-10000)/10000". For example, 10478 + means 4.78dB. + +Example: + sas0: sas@c1000000 { + compatible = "hisilicon,hip05-sas-v1"; + sas-addr = [50 01 88 20 16 00 00 0a]; + reg = <0x0 0xc1000000 0x0 0x10000>; + hisilicon,sas-syscon = <&pcie_sas>; + ctrl-reset-reg = <0xa60>; + ctrl-reset-sts-reg = <0x5a30>; + ctrl-clock-ena-reg = <0x338>; + queue-count = <32>; + phy-count = <8>; + dma-coherent; + interrupt-parent = <&mbigen_dsa>; + interrupts = <259 4>,<263 4>,<264 4>,/* phy0 */ + <269 4>,<273 4>,<274 4>,/* phy1 */ + <279 4>,<283 4>,<284 4>,/* phy2 */ + <289 4>,<293 4>,<294 4>,/* phy3 */ + <299 4>,<303 4>,<304 4>,/* phy4 */ + <309 4>,<313 4>,<314 4>,/* phy5 */ + <319 4>,<323 4>,<324 4>,/* phy6 */ + <329 4>,<333 4>,<334 4>,/* phy7 */ + <336 1>,<337 1>,<338 1>,/* cq0-2 */ + <339 1>,<340 1>,<341 1>,/* cq3-5 */ + <342 1>,<343 1>,<344 1>,/* cq6-8 */ + <345 1>,<346 1>,<347 1>,/* cq9-11 */ + <348 1>,<349 1>,<350 1>,/* cq12-14 */ + <351 1>,<352 1>,<353 1>,/* cq15-17 */ + <354 1>,<355 1>,<356 1>,/* cq18-20 */ + <357 1>,<358 1>,<359 1>,/* cq21-23 */ + <360 1>,<361 1>,<362 1>,/* cq24-26 */ + <363 1>,<364 1>,<365 1>,/* cq27-29 */ + <366 1>,<367 1>/* cq30-31 */ + <376 4>,/* fatal ecc */ + <381 4>;/* fatal axi */ + }; |