diff options
Diffstat (limited to 'Documentation/fault-injection')
| -rw-r--r-- | Documentation/fault-injection/fault-injection.rst | 478 | ||||
| -rw-r--r-- | Documentation/fault-injection/index.rst | 20 | ||||
| -rw-r--r-- | Documentation/fault-injection/notifier-error-inject.rst | 98 | ||||
| -rw-r--r-- | Documentation/fault-injection/nvme-fault-injection.rst | 178 | ||||
| -rw-r--r-- | Documentation/fault-injection/provoke-crashes.rst | 57 |
5 files changed, 831 insertions, 0 deletions
diff --git a/Documentation/fault-injection/fault-injection.rst b/Documentation/fault-injection/fault-injection.rst new file mode 100644 index 000000000..5f6454b9d --- /dev/null +++ b/Documentation/fault-injection/fault-injection.rst @@ -0,0 +1,478 @@ +=========================================== +Fault injection capabilities infrastructure +=========================================== + +See also drivers/md/md-faulty.c and "every_nth" module option for scsi_debug. + + +Available fault injection capabilities +-------------------------------------- + +- failslab + + injects slab allocation failures. (kmalloc(), kmem_cache_alloc(), ...) + +- fail_page_alloc + + injects page allocation failures. (alloc_pages(), get_free_pages(), ...) + +- fail_usercopy + + injects failures in user memory access functions. (copy_from_user(), get_user(), ...) + +- fail_futex + + injects futex deadlock and uaddr fault errors. + +- fail_sunrpc + + injects kernel RPC client and server failures. + +- fail_make_request + + injects disk IO errors on devices permitted by setting + /sys/block/<device>/make-it-fail or + /sys/block/<device>/<partition>/make-it-fail. (submit_bio_noacct()) + +- fail_mmc_request + + injects MMC data errors on devices permitted by setting + debugfs entries under /sys/kernel/debug/mmc0/fail_mmc_request + +- fail_function + + injects error return on specific functions, which are marked by + ALLOW_ERROR_INJECTION() macro, by setting debugfs entries + under /sys/kernel/debug/fail_function. No boot option supported. + +- NVMe fault injection + + inject NVMe status code and retry flag on devices permitted by setting + debugfs entries under /sys/kernel/debug/nvme*/fault_inject. The default + status code is NVME_SC_INVALID_OPCODE with no retry. The status code and + retry flag can be set via the debugfs. + + +Configure fault-injection capabilities behavior +----------------------------------------------- + +debugfs entries +^^^^^^^^^^^^^^^ + +fault-inject-debugfs kernel module provides some debugfs entries for runtime +configuration of fault-injection capabilities. + +- /sys/kernel/debug/fail*/probability: + + likelihood of failure injection, in percent. + + Format: <percent> + + Note that one-failure-per-hundred is a very high error rate + for some testcases. Consider setting probability=100 and configure + /sys/kernel/debug/fail*/interval for such testcases. + +- /sys/kernel/debug/fail*/interval: + + specifies the interval between failures, for calls to + should_fail() that pass all the other tests. + + Note that if you enable this, by setting interval>1, you will + probably want to set probability=100. + +- /sys/kernel/debug/fail*/times: + + specifies how many times failures may happen at most. A value of -1 + means "no limit". + +- /sys/kernel/debug/fail*/space: + + specifies an initial resource "budget", decremented by "size" + on each call to should_fail(,size). Failure injection is + suppressed until "space" reaches zero. + +- /sys/kernel/debug/fail*/verbose + + Format: { 0 | 1 | 2 } + + specifies the verbosity of the messages when failure is + injected. '0' means no messages; '1' will print only a single + log line per failure; '2' will print a call trace too -- useful + to debug the problems revealed by fault injection. + +- /sys/kernel/debug/fail*/task-filter: + + Format: { 'Y' | 'N' } + + A value of 'N' disables filtering by process (default). + Any positive value limits failures to only processes indicated by + /proc/<pid>/make-it-fail==1. + +- /sys/kernel/debug/fail*/require-start, + /sys/kernel/debug/fail*/require-end, + /sys/kernel/debug/fail*/reject-start, + /sys/kernel/debug/fail*/reject-end: + + specifies the range of virtual addresses tested during + stacktrace walking. Failure is injected only if some caller + in the walked stacktrace lies within the required range, and + none lies within the rejected range. + Default required range is [0,ULONG_MAX) (whole of virtual address space). + Default rejected range is [0,0). + +- /sys/kernel/debug/fail*/stacktrace-depth: + + specifies the maximum stacktrace depth walked during search + for a caller within [require-start,require-end) OR + [reject-start,reject-end). + +- /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem: + + Format: { 'Y' | 'N' } + + default is 'Y', setting it to 'N' will also inject failures into + highmem/user allocations (__GFP_HIGHMEM allocations). + +- /sys/kernel/debug/failslab/ignore-gfp-wait: +- /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait: + + Format: { 'Y' | 'N' } + + default is 'Y', setting it to 'N' will also inject failures + into allocations that can sleep (__GFP_DIRECT_RECLAIM allocations). + +- /sys/kernel/debug/fail_page_alloc/min-order: + + specifies the minimum page allocation order to be injected + failures. + +- /sys/kernel/debug/fail_futex/ignore-private: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will disable failure injections + when dealing with private (address space) futexes. + +- /sys/kernel/debug/fail_sunrpc/ignore-client-disconnect: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will disable disconnect + injection on the RPC client. + +- /sys/kernel/debug/fail_sunrpc/ignore-server-disconnect: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will disable disconnect + injection on the RPC server. + +- /sys/kernel/debug/fail_sunrpc/ignore-cache-wait: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will disable cache wait + injection on the RPC server. + +- /sys/kernel/debug/fail_function/inject: + + Format: { 'function-name' | '!function-name' | '' } + + specifies the target function of error injection by name. + If the function name leads '!' prefix, given function is + removed from injection list. If nothing specified ('') + injection list is cleared. + +- /sys/kernel/debug/fail_function/injectable: + + (read only) shows error injectable functions and what type of + error values can be specified. The error type will be one of + below; + - NULL: retval must be 0. + - ERRNO: retval must be -1 to -MAX_ERRNO (-4096). + - ERR_NULL: retval must be 0 or -1 to -MAX_ERRNO (-4096). + +- /sys/kernel/debug/fail_function/<function-name>/retval: + + specifies the "error" return value to inject to the given function. + This will be created when the user specifies a new injection entry. + Note that this file only accepts unsigned values. So, if you want to + use a negative errno, you better use 'printf' instead of 'echo', e.g.: + $ printf %#x -12 > retval + +Boot option +^^^^^^^^^^^ + +In order to inject faults while debugfs is not available (early boot time), +use the boot option:: + + failslab= + fail_page_alloc= + fail_usercopy= + fail_make_request= + fail_futex= + mmc_core.fail_request=<interval>,<probability>,<space>,<times> + +proc entries +^^^^^^^^^^^^ + +- /proc/<pid>/fail-nth, + /proc/self/task/<tid>/fail-nth: + + Write to this file of integer N makes N-th call in the task fail. + Read from this file returns a integer value. A value of '0' indicates + that the fault setup with a previous write to this file was injected. + A positive integer N indicates that the fault wasn't yet injected. + Note that this file enables all types of faults (slab, futex, etc). + This setting takes precedence over all other generic debugfs settings + like probability, interval, times, etc. But per-capability settings + (e.g. fail_futex/ignore-private) take precedence over it. + + This feature is intended for systematic testing of faults in a single + system call. See an example below. + +How to add new fault injection capability +----------------------------------------- + +- #include <linux/fault-inject.h> + +- define the fault attributes + + DECLARE_FAULT_ATTR(name); + + Please see the definition of struct fault_attr in fault-inject.h + for details. + +- provide a way to configure fault attributes + +- boot option + + If you need to enable the fault injection capability from boot time, you can + provide boot option to configure it. There is a helper function for it: + + setup_fault_attr(attr, str); + +- debugfs entries + + failslab, fail_page_alloc, fail_usercopy, and fail_make_request use this way. + Helper functions: + + fault_create_debugfs_attr(name, parent, attr); + +- module parameters + + If the scope of the fault injection capability is limited to a + single kernel module, it is better to provide module parameters to + configure the fault attributes. + +- add a hook to insert failures + + Upon should_fail() returning true, client code should inject a failure: + + should_fail(attr, size); + +Application Examples +-------------------- + +- Inject slab allocation failures into module init/exit code:: + + #!/bin/bash + + FAILTYPE=failslab + echo Y > /sys/kernel/debug/$FAILTYPE/task-filter + echo 10 > /sys/kernel/debug/$FAILTYPE/probability + echo 100 > /sys/kernel/debug/$FAILTYPE/interval + echo -1 > /sys/kernel/debug/$FAILTYPE/times + echo 0 > /sys/kernel/debug/$FAILTYPE/space + echo 2 > /sys/kernel/debug/$FAILTYPE/verbose + echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait + + faulty_system() + { + bash -c "echo 1 > /proc/self/make-it-fail && exec $*" + } + + if [ $# -eq 0 ] + then + echo "Usage: $0 modulename [ modulename ... ]" + exit 1 + fi + + for m in $* + do + echo inserting $m... + faulty_system modprobe $m + + echo removing $m... + faulty_system modprobe -r $m + done + +------------------------------------------------------------------------------ + +- Inject page allocation failures only for a specific module:: + + #!/bin/bash + + FAILTYPE=fail_page_alloc + module=$1 + + if [ -z $module ] + then + echo "Usage: $0 <modulename>" + exit 1 + fi + + modprobe $module + + if [ ! -d /sys/module/$module/sections ] + then + echo Module $module is not loaded + exit 1 + fi + + cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start + cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end + + echo N > /sys/kernel/debug/$FAILTYPE/task-filter + echo 10 > /sys/kernel/debug/$FAILTYPE/probability + echo 100 > /sys/kernel/debug/$FAILTYPE/interval + echo -1 > /sys/kernel/debug/$FAILTYPE/times + echo 0 > /sys/kernel/debug/$FAILTYPE/space + echo 2 > /sys/kernel/debug/$FAILTYPE/verbose + echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait + echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem + echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth + + trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT + + echo "Injecting errors into the module $module... (interrupt to stop)" + sleep 1000000 + +------------------------------------------------------------------------------ + +- Inject open_ctree error while btrfs mount:: + + #!/bin/bash + + rm -f testfile.img + dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 + DEVICE=$(losetup --show -f testfile.img) + mkfs.btrfs -f $DEVICE + mkdir -p tmpmnt + + FAILTYPE=fail_function + FAILFUNC=open_ctree + echo $FAILFUNC > /sys/kernel/debug/$FAILTYPE/inject + printf %#x -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval + echo N > /sys/kernel/debug/$FAILTYPE/task-filter + echo 100 > /sys/kernel/debug/$FAILTYPE/probability + echo 0 > /sys/kernel/debug/$FAILTYPE/interval + echo -1 > /sys/kernel/debug/$FAILTYPE/times + echo 0 > /sys/kernel/debug/$FAILTYPE/space + echo 1 > /sys/kernel/debug/$FAILTYPE/verbose + + mount -t btrfs $DEVICE tmpmnt + if [ $? -ne 0 ] + then + echo "SUCCESS!" + else + echo "FAILED!" + umount tmpmnt + fi + + echo > /sys/kernel/debug/$FAILTYPE/inject + + rmdir tmpmnt + losetup -d $DEVICE + rm testfile.img + + +Tool to run command with failslab or fail_page_alloc +---------------------------------------------------- +In order to make it easier to accomplish the tasks mentioned above, we can use +tools/testing/fault-injection/failcmd.sh. Please run a command +"./tools/testing/fault-injection/failcmd.sh --help" for more information and +see the following examples. + +Examples: + +Run a command "make -C tools/testing/selftests/ run_tests" with injecting slab +allocation failure:: + + # ./tools/testing/fault-injection/failcmd.sh \ + -- make -C tools/testing/selftests/ run_tests + +Same as above except to specify 100 times failures at most instead of one time +at most by default:: + + # ./tools/testing/fault-injection/failcmd.sh --times=100 \ + -- make -C tools/testing/selftests/ run_tests + +Same as above except to inject page allocation failure instead of slab +allocation failure:: + + # env FAILCMD_TYPE=fail_page_alloc \ + ./tools/testing/fault-injection/failcmd.sh --times=100 \ + -- make -C tools/testing/selftests/ run_tests + +Systematic faults using fail-nth +--------------------------------- + +The following code systematically faults 0-th, 1-st, 2-nd and so on +capabilities in the socketpair() system call:: + + #include <sys/types.h> + #include <sys/stat.h> + #include <sys/socket.h> + #include <sys/syscall.h> + #include <fcntl.h> + #include <unistd.h> + #include <string.h> + #include <stdlib.h> + #include <stdio.h> + #include <errno.h> + + int main() + { + int i, err, res, fail_nth, fds[2]; + char buf[128]; + + system("echo N > /sys/kernel/debug/failslab/ignore-gfp-wait"); + sprintf(buf, "/proc/self/task/%ld/fail-nth", syscall(SYS_gettid)); + fail_nth = open(buf, O_RDWR); + for (i = 1;; i++) { + sprintf(buf, "%d", i); + write(fail_nth, buf, strlen(buf)); + res = socketpair(AF_LOCAL, SOCK_STREAM, 0, fds); + err = errno; + pread(fail_nth, buf, sizeof(buf), 0); + if (res == 0) { + close(fds[0]); + close(fds[1]); + } + printf("%d-th fault %c: res=%d/%d\n", i, atoi(buf) ? 'N' : 'Y', + res, err); + if (atoi(buf)) + break; + } + return 0; + } + +An example output:: + + 1-th fault Y: res=-1/23 + 2-th fault Y: res=-1/23 + 3-th fault Y: res=-1/12 + 4-th fault Y: res=-1/12 + 5-th fault Y: res=-1/23 + 6-th fault Y: res=-1/23 + 7-th fault Y: res=-1/23 + 8-th fault Y: res=-1/12 + 9-th fault Y: res=-1/12 + 10-th fault Y: res=-1/12 + 11-th fault Y: res=-1/12 + 12-th fault Y: res=-1/12 + 13-th fault Y: res=-1/12 + 14-th fault Y: res=-1/12 + 15-th fault Y: res=-1/12 + 16-th fault N: res=0/12 diff --git a/Documentation/fault-injection/index.rst b/Documentation/fault-injection/index.rst new file mode 100644 index 000000000..8408a8a91 --- /dev/null +++ b/Documentation/fault-injection/index.rst @@ -0,0 +1,20 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +fault-injection +=============== + +.. toctree:: + :maxdepth: 1 + + fault-injection + notifier-error-inject + nvme-fault-injection + provoke-crashes + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/fault-injection/notifier-error-inject.rst b/Documentation/fault-injection/notifier-error-inject.rst new file mode 100644 index 000000000..fdf2dc433 --- /dev/null +++ b/Documentation/fault-injection/notifier-error-inject.rst @@ -0,0 +1,98 @@ +Notifier error injection +======================== + +Notifier error injection provides the ability to inject artificial errors to +specified notifier chain callbacks. It is useful to test the error handling of +notifier call chain failures which is rarely executed. There are kernel +modules that can be used to test the following notifiers. + + * PM notifier + * Memory hotplug notifier + * powerpc pSeries reconfig notifier + * Netdevice notifier + +PM notifier error injection module +---------------------------------- +This feature is controlled through debugfs interface + + /sys/kernel/debug/notifier-error-inject/pm/actions/<notifier event>/error + +Possible PM notifier events to be failed are: + + * PM_HIBERNATION_PREPARE + * PM_SUSPEND_PREPARE + * PM_RESTORE_PREPARE + +Example: Inject PM suspend error (-12 = -ENOMEM):: + + # cd /sys/kernel/debug/notifier-error-inject/pm/ + # echo -12 > actions/PM_SUSPEND_PREPARE/error + # echo mem > /sys/power/state + bash: echo: write error: Cannot allocate memory + +Memory hotplug notifier error injection module +---------------------------------------------- +This feature is controlled through debugfs interface + + /sys/kernel/debug/notifier-error-inject/memory/actions/<notifier event>/error + +Possible memory notifier events to be failed are: + + * MEM_GOING_ONLINE + * MEM_GOING_OFFLINE + +Example: Inject memory hotplug offline error (-12 == -ENOMEM):: + + # cd /sys/kernel/debug/notifier-error-inject/memory + # echo -12 > actions/MEM_GOING_OFFLINE/error + # echo offline > /sys/devices/system/memory/memoryXXX/state + bash: echo: write error: Cannot allocate memory + +powerpc pSeries reconfig notifier error injection module +-------------------------------------------------------- +This feature is controlled through debugfs interface + + /sys/kernel/debug/notifier-error-inject/pSeries-reconfig/actions/<notifier event>/error + +Possible pSeries reconfig notifier events to be failed are: + + * PSERIES_RECONFIG_ADD + * PSERIES_RECONFIG_REMOVE + * PSERIES_DRCONF_MEM_ADD + * PSERIES_DRCONF_MEM_REMOVE + +Netdevice notifier error injection module +---------------------------------------------- +This feature is controlled through debugfs interface + + /sys/kernel/debug/notifier-error-inject/netdev/actions/<notifier event>/error + +Netdevice notifier events which can be failed are: + + * NETDEV_REGISTER + * NETDEV_CHANGEMTU + * NETDEV_CHANGENAME + * NETDEV_PRE_UP + * NETDEV_PRE_TYPE_CHANGE + * NETDEV_POST_INIT + * NETDEV_PRECHANGEMTU + * NETDEV_PRECHANGEUPPER + * NETDEV_CHANGEUPPER + +Example: Inject netdevice mtu change error (-22 == -EINVAL):: + + # cd /sys/kernel/debug/notifier-error-inject/netdev + # echo -22 > actions/NETDEV_CHANGEMTU/error + # ip link set eth0 mtu 1024 + RTNETLINK answers: Invalid argument + +For more usage examples +----------------------- +There are tools/testing/selftests using the notifier error injection features +for CPU and memory notifiers. + + * tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh + * tools/testing/selftests/memory-hotplug/mem-on-off-test.sh + +These scripts first do simple online and offline tests and then do fault +injection tests if notifier error injection module is available. diff --git a/Documentation/fault-injection/nvme-fault-injection.rst b/Documentation/fault-injection/nvme-fault-injection.rst new file mode 100644 index 000000000..1d4427890 --- /dev/null +++ b/Documentation/fault-injection/nvme-fault-injection.rst @@ -0,0 +1,178 @@ +NVMe Fault Injection +==================== +Linux's fault injection framework provides a systematic way to support +error injection via debugfs in the /sys/kernel/debug directory. When +enabled, the default NVME_SC_INVALID_OPCODE with no retry will be +injected into the nvme_try_complete_req. Users can change the default status +code and no retry flag via the debugfs. The list of Generic Command +Status can be found in include/linux/nvme.h + +Following examples show how to inject an error into the nvme. + +First, enable CONFIG_FAULT_INJECTION_DEBUG_FS kernel config, +recompile the kernel. After booting up the kernel, do the +following. + +Example 1: Inject default status code with no retry +--------------------------------------------------- + +:: + + mount /dev/nvme0n1 /mnt + echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times + echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability + cp a.file /mnt + +Expected Result:: + + cp: cannot stat ‘/mnt/a.file’: Input/output error + +Message from dmesg:: + + FAULT_INJECTION: forcing a failure. + name fault_inject, interval 1, probability 100, space 0, times 1 + CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2 + Hardware name: innotek GmbH VirtualBox/VirtualBox, + BIOS VirtualBox 12/01/2006 + Call Trace: + <IRQ> + dump_stack+0x5c/0x7d + should_fail+0x148/0x170 + nvme_should_fail+0x2f/0x50 [nvme_core] + nvme_process_cq+0xe7/0x1d0 [nvme] + nvme_irq+0x1e/0x40 [nvme] + __handle_irq_event_percpu+0x3a/0x190 + handle_irq_event_percpu+0x30/0x70 + handle_irq_event+0x36/0x60 + handle_fasteoi_irq+0x78/0x120 + handle_irq+0xa7/0x130 + ? tick_irq_enter+0xa8/0xc0 + do_IRQ+0x43/0xc0 + common_interrupt+0xa2/0xa2 + </IRQ> + RIP: 0010:native_safe_halt+0x2/0x10 + RSP: 0018:ffffffff82003e90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd + RAX: ffffffff817a10c0 RBX: ffffffff82012480 RCX: 0000000000000000 + RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 + RBP: 0000000000000000 R08: 000000008e38ce64 R09: 0000000000000000 + R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82012480 + R13: ffffffff82012480 R14: 0000000000000000 R15: 0000000000000000 + ? __sched_text_end+0x4/0x4 + default_idle+0x18/0xf0 + do_idle+0x150/0x1d0 + cpu_startup_entry+0x6f/0x80 + start_kernel+0x4c4/0x4e4 + ? set_init_arg+0x55/0x55 + secondary_startup_64+0xa5/0xb0 + print_req_error: I/O error, dev nvme0n1, sector 9240 + EXT4-fs error (device nvme0n1): ext4_find_entry:1436: + inode #2: comm cp: reading directory lblock 0 + +Example 2: Inject default status code with retry +------------------------------------------------ + +:: + + mount /dev/nvme0n1 /mnt + echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times + echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability + echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/status + echo 0 > /sys/kernel/debug/nvme0n1/fault_inject/dont_retry + + cp a.file /mnt + +Expected Result:: + + command success without error + +Message from dmesg:: + + FAULT_INJECTION: forcing a failure. + name fault_inject, interval 1, probability 100, space 0, times 1 + CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc8+ #4 + Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 + Call Trace: + <IRQ> + dump_stack+0x5c/0x7d + should_fail+0x148/0x170 + nvme_should_fail+0x30/0x60 [nvme_core] + nvme_loop_queue_response+0x84/0x110 [nvme_loop] + nvmet_req_complete+0x11/0x40 [nvmet] + nvmet_bio_done+0x28/0x40 [nvmet] + blk_update_request+0xb0/0x310 + blk_mq_end_request+0x18/0x60 + flush_smp_call_function_queue+0x3d/0xf0 + smp_call_function_single_interrupt+0x2c/0xc0 + call_function_single_interrupt+0xa2/0xb0 + </IRQ> + RIP: 0010:native_safe_halt+0x2/0x10 + RSP: 0018:ffffc9000068bec0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff04 + RAX: ffffffff817a10c0 RBX: ffff88011a3c9680 RCX: 0000000000000000 + RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 + RBP: 0000000000000001 R08: 000000008e38c131 R09: 0000000000000000 + R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011a3c9680 + R13: ffff88011a3c9680 R14: 0000000000000000 R15: 0000000000000000 + ? __sched_text_end+0x4/0x4 + default_idle+0x18/0xf0 + do_idle+0x150/0x1d0 + cpu_startup_entry+0x6f/0x80 + start_secondary+0x187/0x1e0 + secondary_startup_64+0xa5/0xb0 + +Example 3: Inject an error into the 10th admin command +------------------------------------------------------ + +:: + + echo 100 > /sys/kernel/debug/nvme0/fault_inject/probability + echo 10 > /sys/kernel/debug/nvme0/fault_inject/space + echo 1 > /sys/kernel/debug/nvme0/fault_inject/times + nvme reset /dev/nvme0 + +Expected Result:: + + After NVMe controller reset, the reinitialization may or may not succeed. + It depends on which admin command is actually forced to fail. + +Message from dmesg:: + + nvme nvme0: resetting controller + FAULT_INJECTION: forcing a failure. + name fault_inject, interval 1, probability 100, space 1, times 1 + CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0-rc2+ #2 + Hardware name: MSI MS-7A45/B150M MORTAR ARCTIC (MS-7A45), BIOS 1.50 04/25/2017 + Call Trace: + <IRQ> + dump_stack+0x63/0x85 + should_fail+0x14a/0x170 + nvme_should_fail+0x38/0x80 [nvme_core] + nvme_irq+0x129/0x280 [nvme] + ? blk_mq_end_request+0xb3/0x120 + __handle_irq_event_percpu+0x84/0x1a0 + handle_irq_event_percpu+0x32/0x80 + handle_irq_event+0x3b/0x60 + handle_edge_irq+0x7f/0x1a0 + handle_irq+0x20/0x30 + do_IRQ+0x4e/0xe0 + common_interrupt+0xf/0xf + </IRQ> + RIP: 0010:cpuidle_enter_state+0xc5/0x460 + Code: ff e8 8f 5f 86 ff 80 7d c7 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 69 03 00 00 31 ff e8 62 aa 8c ff fb 66 0f 1f 44 00 00 <45> 85 ed 0f 88 37 03 00 00 4c 8b 45 d0 4c 2b 45 b8 48 ba cf f7 53 + RSP: 0018:ffffffff88c03dd0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdc + RAX: ffff9dac25a2ac80 RBX: ffffffff88d53760 RCX: 000000000000001f + RDX: 0000000000000000 RSI: 000000002d958403 RDI: 0000000000000000 + RBP: ffffffff88c03e18 R08: fffffff75e35ffb7 R09: 00000a49a56c0b48 + R10: ffffffff88c03da0 R11: 0000000000001b0c R12: ffff9dac25a34d00 + R13: 0000000000000006 R14: 0000000000000006 R15: ffffffff88d53760 + cpuidle_enter+0x2e/0x40 + call_cpuidle+0x23/0x40 + do_idle+0x201/0x280 + cpu_startup_entry+0x1d/0x20 + rest_init+0xaa/0xb0 + arch_call_rest_init+0xe/0x1b + start_kernel+0x51c/0x53b + x86_64_start_reservations+0x24/0x26 + x86_64_start_kernel+0x74/0x77 + secondary_startup_64+0xa4/0xb0 + nvme nvme0: Could not set queue count (16385) + nvme nvme0: IO queues not created diff --git a/Documentation/fault-injection/provoke-crashes.rst b/Documentation/fault-injection/provoke-crashes.rst new file mode 100644 index 000000000..1f087e502 --- /dev/null +++ b/Documentation/fault-injection/provoke-crashes.rst @@ -0,0 +1,57 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================================ +Provoking crashes with Linux Kernel Dump Test Module (LKDTM) +============================================================ + +The lkdtm module provides an interface to disrupt (and usually crash) +the kernel at predefined code locations to evaluate the reliability of +the kernel's exception handling and to test crash dumps obtained using +different dumping solutions. The module uses KPROBEs to instrument the +trigger location, but can also trigger the kernel directly without KPROBE +support via debugfs. + +You can select the location of the trigger ("crash point name") and the +type of action ("crash point type") either through module arguments when +inserting the module, or through the debugfs interface. + +Usage:: + + insmod lkdtm.ko [recur_count={>0}] cpoint_name=<> cpoint_type=<> + [cpoint_count={>0}] + +recur_count + Recursion level for the stack overflow test. By default this is + dynamically calculated based on kernel configuration, with the + goal of being just large enough to exhaust the kernel stack. The + value can be seen at `/sys/module/lkdtm/parameters/recur_count`. + +cpoint_name + Where in the kernel to trigger the action. It can be + one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY, + FS_SUBMIT_BH, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ, or DIRECT. + +cpoint_type + Indicates the action to be taken on hitting the crash point. + These are numerous, and best queried directly from debugfs. Some + of the common ones are PANIC, BUG, EXCEPTION, LOOP, and OVERFLOW. + See the contents of `/sys/kernel/debug/provoke-crash/DIRECT` for + a complete list. + +cpoint_count + Indicates the number of times the crash point is to be hit + before triggering the action. The default is 10 (except for + DIRECT, which always fires immediately). + +You can also induce failures by mounting debugfs and writing the type to +<debugfs>/provoke-crash/<crashpoint>. E.g.:: + + mount -t debugfs debugfs /sys/kernel/debug + echo EXCEPTION > /sys/kernel/debug/provoke-crash/INT_HARDWARE_ENTRY + +The special file `DIRECT` will induce the action directly without KPROBE +instrumentation. This mode is the only one available when the module is +built for a kernel without KPROBEs support:: + + # Instead of having a BUG kill your shell, have it kill "cat": + cat <(echo WRITE_RO) >/sys/kernel/debug/provoke-crash/DIRECT |