summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/dsa/dsa.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/dsa/dsa.rst')
-rw-r--r--Documentation/networking/dsa/dsa.rst1129
1 files changed, 1129 insertions, 0 deletions
diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst
new file mode 100644
index 000000000..a94ddf833
--- /dev/null
+++ b/Documentation/networking/dsa/dsa.rst
@@ -0,0 +1,1129 @@
+============
+Architecture
+============
+
+This document describes the **Distributed Switch Architecture (DSA)** subsystem
+design principles, limitations, interactions with other subsystems, and how to
+develop drivers for this subsystem as well as a TODO for developers interested
+in joining the effort.
+
+Design principles
+=================
+
+The Distributed Switch Architecture subsystem was primarily designed to
+support Marvell Ethernet switches (MV88E6xxx, a.k.a. Link Street product
+line) using Linux, but has since evolved to support other vendors as well.
+
+The original philosophy behind this design was to be able to use unmodified
+Linux tools such as bridge, iproute2, ifconfig to work transparently whether
+they configured/queried a switch port network device or a regular network
+device.
+
+An Ethernet switch typically comprises multiple front-panel ports and one
+or more CPU or management ports. The DSA subsystem currently relies on the
+presence of a management port connected to an Ethernet controller capable of
+receiving Ethernet frames from the switch. This is a very common setup for all
+kinds of Ethernet switches found in Small Home and Office products: routers,
+gateways, or even top-of-rack switches. This host Ethernet controller will
+be later referred to as "master" and "cpu" in DSA terminology and code.
+
+The D in DSA stands for Distributed, because the subsystem has been designed
+with the ability to configure and manage cascaded switches on top of each other
+using upstream and downstream Ethernet links between switches. These specific
+ports are referred to as "dsa" ports in DSA terminology and code. A collection
+of multiple switches connected to each other is called a "switch tree".
+
+For each front-panel port, DSA creates specialized network devices which are
+used as controlling and data-flowing endpoints for use by the Linux networking
+stack. These specialized network interfaces are referred to as "slave" network
+interfaces in DSA terminology and code.
+
+The ideal case for using DSA is when an Ethernet switch supports a "switch tag"
+which is a hardware feature making the switch insert a specific tag for each
+Ethernet frame it receives to/from specific ports to help the management
+interface figure out:
+
+- what port is this frame coming from
+- what was the reason why this frame got forwarded
+- how to send CPU originated traffic to specific ports
+
+The subsystem does support switches not capable of inserting/stripping tags, but
+the features might be slightly limited in that case (traffic separation relies
+on Port-based VLAN IDs).
+
+Note that DSA does not currently create network interfaces for the "cpu" and
+"dsa" ports because:
+
+- the "cpu" port is the Ethernet switch facing side of the management
+ controller, and as such, would create a duplication of feature, since you
+ would get two interfaces for the same conduit: master netdev, and "cpu" netdev
+
+- the "dsa" port(s) are just conduits between two or more switches, and as such
+ cannot really be used as proper network interfaces either, only the
+ downstream, or the top-most upstream interface makes sense with that model
+
+Switch tagging protocols
+------------------------
+
+DSA supports many vendor-specific tagging protocols, one software-defined
+tagging protocol, and a tag-less mode as well (``DSA_TAG_PROTO_NONE``).
+
+The exact format of the tag protocol is vendor specific, but in general, they
+all contain something which:
+
+- identifies which port the Ethernet frame came from/should be sent to
+- provides a reason why this frame was forwarded to the management interface
+
+All tagging protocols are in ``net/dsa/tag_*.c`` files and implement the
+methods of the ``struct dsa_device_ops`` structure, which are detailed below.
+
+Tagging protocols generally fall in one of three categories:
+
+1. The switch-specific frame header is located before the Ethernet header,
+ shifting to the right (from the perspective of the DSA master's frame
+ parser) the MAC DA, MAC SA, EtherType and the entire L2 payload.
+2. The switch-specific frame header is located before the EtherType, keeping
+ the MAC DA and MAC SA in place from the DSA master's perspective, but
+ shifting the 'real' EtherType and L2 payload to the right.
+3. The switch-specific frame header is located at the tail of the packet,
+ keeping all frame headers in place and not altering the view of the packet
+ that the DSA master's frame parser has.
+
+A tagging protocol may tag all packets with switch tags of the same length, or
+the tag length might vary (for example packets with PTP timestamps might
+require an extended switch tag, or there might be one tag length on TX and a
+different one on RX). Either way, the tagging protocol driver must populate the
+``struct dsa_device_ops::needed_headroom`` and/or ``struct dsa_device_ops::needed_tailroom``
+with the length in octets of the longest switch frame header/trailer. The DSA
+framework will automatically adjust the MTU of the master interface to
+accommodate for this extra size in order for DSA user ports to support the
+standard MTU (L2 payload length) of 1500 octets. The ``needed_headroom`` and
+``needed_tailroom`` properties are also used to request from the network stack,
+on a best-effort basis, the allocation of packets with enough extra space such
+that the act of pushing the switch tag on transmission of a packet does not
+cause it to reallocate due to lack of memory.
+
+Even though applications are not expected to parse DSA-specific frame headers,
+the format on the wire of the tagging protocol represents an Application Binary
+Interface exposed by the kernel towards user space, for decoders such as
+``libpcap``. The tagging protocol driver must populate the ``proto`` member of
+``struct dsa_device_ops`` with a value that uniquely describes the
+characteristics of the interaction required between the switch hardware and the
+data path driver: the offset of each bit field within the frame header and any
+stateful processing required to deal with the frames (as may be required for
+PTP timestamping).
+
+From the perspective of the network stack, all switches within the same DSA
+switch tree use the same tagging protocol. In case of a packet transiting a
+fabric with more than one switch, the switch-specific frame header is inserted
+by the first switch in the fabric that the packet was received on. This header
+typically contains information regarding its type (whether it is a control
+frame that must be trapped to the CPU, or a data frame to be forwarded).
+Control frames should be decapsulated only by the software data path, whereas
+data frames might also be autonomously forwarded towards other user ports of
+other switches from the same fabric, and in this case, the outermost switch
+ports must decapsulate the packet.
+
+Note that in certain cases, it might be the case that the tagging format used
+by a leaf switch (not connected directly to the CPU) is not the same as what
+the network stack sees. This can be seen with Marvell switch trees, where the
+CPU port can be configured to use either the DSA or the Ethertype DSA (EDSA)
+format, but the DSA links are configured to use the shorter (without Ethertype)
+DSA frame header, in order to reduce the autonomous packet forwarding overhead.
+It still remains the case that, if the DSA switch tree is configured for the
+EDSA tagging protocol, the operating system sees EDSA-tagged packets from the
+leaf switches that tagged them with the shorter DSA header. This can be done
+because the Marvell switch connected directly to the CPU is configured to
+perform tag translation between DSA and EDSA (which is simply the operation of
+adding or removing the ``ETH_P_EDSA`` EtherType and some padding octets).
+
+It is possible to construct cascaded setups of DSA switches even if their
+tagging protocols are not compatible with one another. In this case, there are
+no DSA links in this fabric, and each switch constitutes a disjoint DSA switch
+tree. The DSA links are viewed as simply a pair of a DSA master (the out-facing
+port of the upstream DSA switch) and a CPU port (the in-facing port of the
+downstream DSA switch).
+
+The tagging protocol of the attached DSA switch tree can be viewed through the
+``dsa/tagging`` sysfs attribute of the DSA master::
+
+ cat /sys/class/net/eth0/dsa/tagging
+
+If the hardware and driver are capable, the tagging protocol of the DSA switch
+tree can be changed at runtime. This is done by writing the new tagging
+protocol name to the same sysfs device attribute as above (the DSA master and
+all attached switch ports must be down while doing this).
+
+It is desirable that all tagging protocols are testable with the ``dsa_loop``
+mockup driver, which can be attached to any network interface. The goal is that
+any network interface should be capable of transmitting the same packet in the
+same way, and the tagger should decode the same received packet in the same way
+regardless of the driver used for the switch control path, and the driver used
+for the DSA master.
+
+The transmission of a packet goes through the tagger's ``xmit`` function.
+The passed ``struct sk_buff *skb`` has ``skb->data`` pointing at
+``skb_mac_header(skb)``, i.e. at the destination MAC address, and the passed
+``struct net_device *dev`` represents the virtual DSA user network interface
+whose hardware counterpart the packet must be steered to (i.e. ``swp0``).
+The job of this method is to prepare the skb in a way that the switch will
+understand what egress port the packet is for (and not deliver it towards other
+ports). Typically this is fulfilled by pushing a frame header. Checking for
+insufficient size in the skb headroom or tailroom is unnecessary provided that
+the ``needed_headroom`` and ``needed_tailroom`` properties were filled out
+properly, because DSA ensures there is enough space before calling this method.
+
+The reception of a packet goes through the tagger's ``rcv`` function. The
+passed ``struct sk_buff *skb`` has ``skb->data`` pointing at
+``skb_mac_header(skb) + ETH_ALEN`` octets, i.e. to where the first octet after
+the EtherType would have been, were this frame not tagged. The role of this
+method is to consume the frame header, adjust ``skb->data`` to really point at
+the first octet after the EtherType, and to change ``skb->dev`` to point to the
+virtual DSA user network interface corresponding to the physical front-facing
+switch port that the packet was received on.
+
+Since tagging protocols in category 1 and 2 break software (and most often also
+hardware) packet dissection on the DSA master, features such as RPS (Receive
+Packet Steering) on the DSA master would be broken. The DSA framework deals
+with this by hooking into the flow dissector and shifting the offset at which
+the IP header is to be found in the tagged frame as seen by the DSA master.
+This behavior is automatic based on the ``overhead`` value of the tagging
+protocol. If not all packets are of equal size, the tagger can implement the
+``flow_dissect`` method of the ``struct dsa_device_ops`` and override this
+default behavior by specifying the correct offset incurred by each individual
+RX packet. Tail taggers do not cause issues to the flow dissector.
+
+Checksum offload should work with category 1 and 2 taggers when the DSA master
+driver declares NETIF_F_HW_CSUM in vlan_features and looks at csum_start and
+csum_offset. For those cases, DSA will shift the checksum start and offset by
+the tag size. If the DSA master driver still uses the legacy NETIF_F_IP_CSUM
+or NETIF_F_IPV6_CSUM in vlan_features, the offload might only work if the
+offload hardware already expects that specific tag (perhaps due to matching
+vendors). DSA slaves inherit those flags from the master port, and it is up to
+the driver to correctly fall back to software checksum when the IP header is not
+where the hardware expects. If that check is ineffective, the packets might go
+to the network without a proper checksum (the checksum field will have the
+pseudo IP header sum). For category 3, when the offload hardware does not
+already expect the switch tag in use, the checksum must be calculated before any
+tag is inserted (i.e. inside the tagger). Otherwise, the DSA master would
+include the tail tag in the (software or hardware) checksum calculation. Then,
+when the tag gets stripped by the switch during transmission, it will leave an
+incorrect IP checksum in place.
+
+Due to various reasons (most common being category 1 taggers being associated
+with DSA-unaware masters, mangling what the master perceives as MAC DA), the
+tagging protocol may require the DSA master to operate in promiscuous mode, to
+receive all frames regardless of the value of the MAC DA. This can be done by
+setting the ``promisc_on_master`` property of the ``struct dsa_device_ops``.
+Note that this assumes a DSA-unaware master driver, which is the norm.
+
+Master network devices
+----------------------
+
+Master network devices are regular, unmodified Linux network device drivers for
+the CPU/management Ethernet interface. Such a driver might occasionally need to
+know whether DSA is enabled (e.g.: to enable/disable specific offload features),
+but the DSA subsystem has been proven to work with industry standard drivers:
+``e1000e,`` ``mv643xx_eth`` etc. without having to introduce modifications to these
+drivers. Such network devices are also often referred to as conduit network
+devices since they act as a pipe between the host processor and the hardware
+Ethernet switch.
+
+Networking stack hooks
+----------------------
+
+When a master netdev is used with DSA, a small hook is placed in the
+networking stack is in order to have the DSA subsystem process the Ethernet
+switch specific tagging protocol. DSA accomplishes this by registering a
+specific (and fake) Ethernet type (later becoming ``skb->protocol``) with the
+networking stack, this is also known as a ``ptype`` or ``packet_type``. A typical
+Ethernet Frame receive sequence looks like this:
+
+Master network device (e.g.: e1000e):
+
+1. Receive interrupt fires:
+
+ - receive function is invoked
+ - basic packet processing is done: getting length, status etc.
+ - packet is prepared to be processed by the Ethernet layer by calling
+ ``eth_type_trans``
+
+2. net/ethernet/eth.c::
+
+ eth_type_trans(skb, dev)
+ if (dev->dsa_ptr != NULL)
+ -> skb->protocol = ETH_P_XDSA
+
+3. drivers/net/ethernet/\*::
+
+ netif_receive_skb(skb)
+ -> iterate over registered packet_type
+ -> invoke handler for ETH_P_XDSA, calls dsa_switch_rcv()
+
+4. net/dsa/dsa.c::
+
+ -> dsa_switch_rcv()
+ -> invoke switch tag specific protocol handler in 'net/dsa/tag_*.c'
+
+5. net/dsa/tag_*.c:
+
+ - inspect and strip switch tag protocol to determine originating port
+ - locate per-port network device
+ - invoke ``eth_type_trans()`` with the DSA slave network device
+ - invoked ``netif_receive_skb()``
+
+Past this point, the DSA slave network devices get delivered regular Ethernet
+frames that can be processed by the networking stack.
+
+Slave network devices
+---------------------
+
+Slave network devices created by DSA are stacked on top of their master network
+device, each of these network interfaces will be responsible for being a
+controlling and data-flowing end-point for each front-panel port of the switch.
+These interfaces are specialized in order to:
+
+- insert/remove the switch tag protocol (if it exists) when sending traffic
+ to/from specific switch ports
+- query the switch for ethtool operations: statistics, link state,
+ Wake-on-LAN, register dumps...
+- manage external/internal PHY: link, auto-negotiation, etc.
+
+These slave network devices have custom net_device_ops and ethtool_ops function
+pointers which allow DSA to introduce a level of layering between the networking
+stack/ethtool and the switch driver implementation.
+
+Upon frame transmission from these slave network devices, DSA will look up which
+switch tagging protocol is currently registered with these network devices and
+invoke a specific transmit routine which takes care of adding the relevant
+switch tag in the Ethernet frames.
+
+These frames are then queued for transmission using the master network device
+``ndo_start_xmit()`` function. Since they contain the appropriate switch tag, the
+Ethernet switch will be able to process these incoming frames from the
+management interface and deliver them to the physical switch port.
+
+When using multiple CPU ports, it is possible to stack a LAG (bonding/team)
+device between the DSA slave devices and the physical DSA masters. The LAG
+device is thus also a DSA master, but the LAG slave devices continue to be DSA
+masters as well (just with no user port assigned to them; this is needed for
+recovery in case the LAG DSA master disappears). Thus, the data path of the LAG
+DSA master is used asymmetrically. On RX, the ``ETH_P_XDSA`` handler, which
+calls ``dsa_switch_rcv()``, is invoked early (on the physical DSA master;
+LAG slave). Therefore, the RX data path of the LAG DSA master is not used.
+On the other hand, TX takes place linearly: ``dsa_slave_xmit`` calls
+``dsa_enqueue_skb``, which calls ``dev_queue_xmit`` towards the LAG DSA master.
+The latter calls ``dev_queue_xmit`` towards one physical DSA master or the
+other, and in both cases, the packet exits the system through a hardware path
+towards the switch.
+
+Graphical representation
+------------------------
+
+Summarized, this is basically how DSA looks like from a network device
+perspective::
+
+ Unaware application
+ opens and binds socket
+ | ^
+ | |
+ +-----------v--|--------------------+
+ |+------+ +------+ +------+ +------+|
+ || swp0 | | swp1 | | swp2 | | swp3 ||
+ |+------+-+------+-+------+-+------+|
+ | DSA switch driver |
+ +-----------------------------------+
+ | ^
+ Tag added by | | Tag consumed by
+ switch driver | | switch driver
+ v |
+ +-----------------------------------+
+ | Unmodified host interface driver | Software
+ --------+-----------------------------------+------------
+ | Host interface (eth0) | Hardware
+ +-----------------------------------+
+ | ^
+ Tag consumed by | | Tag added by
+ switch hardware | | switch hardware
+ v |
+ +-----------------------------------+
+ | Switch |
+ |+------+ +------+ +------+ +------+|
+ || swp0 | | swp1 | | swp2 | | swp3 ||
+ ++------+-+------+-+------+-+------++
+
+Slave MDIO bus
+--------------
+
+In order to be able to read to/from a switch PHY built into it, DSA creates a
+slave MDIO bus which allows a specific switch driver to divert and intercept
+MDIO reads/writes towards specific PHY addresses. In most MDIO-connected
+switches, these functions would utilize direct or indirect PHY addressing mode
+to return standard MII registers from the switch builtin PHYs, allowing the PHY
+library and/or to return link status, link partner pages, auto-negotiation
+results, etc.
+
+For Ethernet switches which have both external and internal MDIO buses, the
+slave MII bus can be utilized to mux/demux MDIO reads and writes towards either
+internal or external MDIO devices this switch might be connected to: internal
+PHYs, external PHYs, or even external switches.
+
+Data structures
+---------------
+
+DSA data structures are defined in ``include/net/dsa.h`` as well as
+``net/dsa/dsa_priv.h``:
+
+- ``dsa_chip_data``: platform data configuration for a given switch device,
+ this structure describes a switch device's parent device, its address, as
+ well as various properties of its ports: names/labels, and finally a routing
+ table indication (when cascading switches)
+
+- ``dsa_platform_data``: platform device configuration data which can reference
+ a collection of dsa_chip_data structures if multiple switches are cascaded,
+ the master network device this switch tree is attached to needs to be
+ referenced
+
+- ``dsa_switch_tree``: structure assigned to the master network device under
+ ``dsa_ptr``, this structure references a dsa_platform_data structure as well as
+ the tagging protocol supported by the switch tree, and which receive/transmit
+ function hooks should be invoked, information about the directly attached
+ switch is also provided: CPU port. Finally, a collection of dsa_switch are
+ referenced to address individual switches in the tree.
+
+- ``dsa_switch``: structure describing a switch device in the tree, referencing
+ a ``dsa_switch_tree`` as a backpointer, slave network devices, master network
+ device, and a reference to the backing``dsa_switch_ops``
+
+- ``dsa_switch_ops``: structure referencing function pointers, see below for a
+ full description.
+
+Design limitations
+==================
+
+Lack of CPU/DSA network devices
+-------------------------------
+
+DSA does not currently create slave network devices for the CPU or DSA ports, as
+described before. This might be an issue in the following cases:
+
+- inability to fetch switch CPU port statistics counters using ethtool, which
+ can make it harder to debug MDIO switch connected using xMII interfaces
+
+- inability to configure the CPU port link parameters based on the Ethernet
+ controller capabilities attached to it: http://patchwork.ozlabs.org/patch/509806/
+
+- inability to configure specific VLAN IDs / trunking VLANs between switches
+ when using a cascaded setup
+
+Common pitfalls using DSA setups
+--------------------------------
+
+Once a master network device is configured to use DSA (dev->dsa_ptr becomes
+non-NULL), and the switch behind it expects a tagging protocol, this network
+interface can only exclusively be used as a conduit interface. Sending packets
+directly through this interface (e.g.: opening a socket using this interface)
+will not make us go through the switch tagging protocol transmit function, so
+the Ethernet switch on the other end, expecting a tag will typically drop this
+frame.
+
+Interactions with other subsystems
+==================================
+
+DSA currently leverages the following subsystems:
+
+- MDIO/PHY library: ``drivers/net/phy/phy.c``, ``mdio_bus.c``
+- Switchdev:``net/switchdev/*``
+- Device Tree for various of_* functions
+- Devlink: ``net/core/devlink.c``
+
+MDIO/PHY library
+----------------
+
+Slave network devices exposed by DSA may or may not be interfacing with PHY
+devices (``struct phy_device`` as defined in ``include/linux/phy.h)``, but the DSA
+subsystem deals with all possible combinations:
+
+- internal PHY devices, built into the Ethernet switch hardware
+- external PHY devices, connected via an internal or external MDIO bus
+- internal PHY devices, connected via an internal MDIO bus
+- special, non-autonegotiated or non MDIO-managed PHY devices: SFPs, MoCA; a.k.a
+ fixed PHYs
+
+The PHY configuration is done by the ``dsa_slave_phy_setup()`` function and the
+logic basically looks like this:
+
+- if Device Tree is used, the PHY device is looked up using the standard
+ "phy-handle" property, if found, this PHY device is created and registered
+ using ``of_phy_connect()``
+
+- if Device Tree is used and the PHY device is "fixed", that is, conforms to
+ the definition of a non-MDIO managed PHY as defined in
+ ``Documentation/devicetree/bindings/net/fixed-link.txt``, the PHY is registered
+ and connected transparently using the special fixed MDIO bus driver
+
+- finally, if the PHY is built into the switch, as is very common with
+ standalone switch packages, the PHY is probed using the slave MII bus created
+ by DSA
+
+
+SWITCHDEV
+---------
+
+DSA directly utilizes SWITCHDEV when interfacing with the bridge layer, and
+more specifically with its VLAN filtering portion when configuring VLANs on top
+of per-port slave network devices. As of today, the only SWITCHDEV objects
+supported by DSA are the FDB and VLAN objects.
+
+Devlink
+-------
+
+DSA registers one devlink device per physical switch in the fabric.
+For each devlink device, every physical port (i.e. user ports, CPU ports, DSA
+links or unused ports) is exposed as a devlink port.
+
+DSA drivers can make use of the following devlink features:
+
+- Regions: debugging feature which allows user space to dump driver-defined
+ areas of hardware information in a low-level, binary format. Both global
+ regions as well as per-port regions are supported. It is possible to export
+ devlink regions even for pieces of data that are already exposed in some way
+ to the standard iproute2 user space programs (ip-link, bridge), like address
+ tables and VLAN tables. For example, this might be useful if the tables
+ contain additional hardware-specific details which are not visible through
+ the iproute2 abstraction, or it might be useful to inspect these tables on
+ the non-user ports too, which are invisible to iproute2 because no network
+ interface is registered for them.
+- Params: a feature which enables user to configure certain low-level tunable
+ knobs pertaining to the device. Drivers may implement applicable generic
+ devlink params, or may add new device-specific devlink params.
+- Resources: a monitoring feature which enables users to see the degree of
+ utilization of certain hardware tables in the device, such as FDB, VLAN, etc.
+- Shared buffers: a QoS feature for adjusting and partitioning memory and frame
+ reservations per port and per traffic class, in the ingress and egress
+ directions, such that low-priority bulk traffic does not impede the
+ processing of high-priority critical traffic.
+
+For more details, consult ``Documentation/networking/devlink/``.
+
+Device Tree
+-----------
+
+DSA features a standardized binding which is documented in
+``Documentation/devicetree/bindings/net/dsa/dsa.txt``. PHY/MDIO library helper
+functions such as ``of_get_phy_mode()``, ``of_phy_connect()`` are also used to query
+per-port PHY specific details: interface connection, MDIO bus location, etc.
+
+Driver development
+==================
+
+DSA switch drivers need to implement a ``dsa_switch_ops`` structure which will
+contain the various members described below.
+
+Probing, registration and device lifetime
+-----------------------------------------
+
+DSA switches are regular ``device`` structures on buses (be they platform, SPI,
+I2C, MDIO or otherwise). The DSA framework is not involved in their probing
+with the device core.
+
+Switch registration from the perspective of a driver means passing a valid
+``struct dsa_switch`` pointer to ``dsa_register_switch()``, usually from the
+switch driver's probing function. The following members must be valid in the
+provided structure:
+
+- ``ds->dev``: will be used to parse the switch's OF node or platform data.
+
+- ``ds->num_ports``: will be used to create the port list for this switch, and
+ to validate the port indices provided in the OF node.
+
+- ``ds->ops``: a pointer to the ``dsa_switch_ops`` structure holding the DSA
+ method implementations.
+
+- ``ds->priv``: backpointer to a driver-private data structure which can be
+ retrieved in all further DSA method callbacks.
+
+In addition, the following flags in the ``dsa_switch`` structure may optionally
+be configured to obtain driver-specific behavior from the DSA core. Their
+behavior when set is documented through comments in ``include/net/dsa.h``.
+
+- ``ds->vlan_filtering_is_global``
+
+- ``ds->needs_standalone_vlan_filtering``
+
+- ``ds->configure_vlan_while_not_filtering``
+
+- ``ds->untag_bridge_pvid``
+
+- ``ds->assisted_learning_on_cpu_port``
+
+- ``ds->mtu_enforcement_ingress``
+
+- ``ds->fdb_isolation``
+
+Internally, DSA keeps an array of switch trees (group of switches) global to
+the kernel, and attaches a ``dsa_switch`` structure to a tree on registration.
+The tree ID to which the switch is attached is determined by the first u32
+number of the ``dsa,member`` property of the switch's OF node (0 if missing).
+The switch ID within the tree is determined by the second u32 number of the
+same OF property (0 if missing). Registering multiple switches with the same
+switch ID and tree ID is illegal and will cause an error. Using platform data,
+a single switch and a single switch tree is permitted.
+
+In case of a tree with multiple switches, probing takes place asymmetrically.
+The first N-1 callers of ``dsa_register_switch()`` only add their ports to the
+port list of the tree (``dst->ports``), each port having a backpointer to its
+associated switch (``dp->ds``). Then, these switches exit their
+``dsa_register_switch()`` call early, because ``dsa_tree_setup_routing_table()``
+has determined that the tree is not yet complete (not all ports referenced by
+DSA links are present in the tree's port list). The tree becomes complete when
+the last switch calls ``dsa_register_switch()``, and this triggers the effective
+continuation of initialization (including the call to ``ds->ops->setup()``) for
+all switches within that tree, all as part of the calling context of the last
+switch's probe function.
+
+The opposite of registration takes place when calling ``dsa_unregister_switch()``,
+which removes a switch's ports from the port list of the tree. The entire tree
+is torn down when the first switch unregisters.
+
+It is mandatory for DSA switch drivers to implement the ``shutdown()`` callback
+of their respective bus, and call ``dsa_switch_shutdown()`` from it (a minimal
+version of the full teardown performed by ``dsa_unregister_switch()``).
+The reason is that DSA keeps a reference on the master net device, and if the
+driver for the master device decides to unbind on shutdown, DSA's reference
+will block that operation from finalizing.
+
+Either ``dsa_switch_shutdown()`` or ``dsa_unregister_switch()`` must be called,
+but not both, and the device driver model permits the bus' ``remove()`` method
+to be called even if ``shutdown()`` was already called. Therefore, drivers are
+expected to implement a mutual exclusion method between ``remove()`` and
+``shutdown()`` by setting their drvdata to NULL after any of these has run, and
+checking whether the drvdata is NULL before proceeding to take any action.
+
+After ``dsa_switch_shutdown()`` or ``dsa_unregister_switch()`` was called, no
+further callbacks via the provided ``dsa_switch_ops`` may take place, and the
+driver may free the data structures associated with the ``dsa_switch``.
+
+Switch configuration
+--------------------
+
+- ``get_tag_protocol``: this is to indicate what kind of tagging protocol is
+ supported, should be a valid value from the ``dsa_tag_protocol`` enum.
+ The returned information does not have to be static; the driver is passed the
+ CPU port number, as well as the tagging protocol of a possibly stacked
+ upstream switch, in case there are hardware limitations in terms of supported
+ tag formats.
+
+- ``change_tag_protocol``: when the default tagging protocol has compatibility
+ problems with the master or other issues, the driver may support changing it
+ at runtime, either through a device tree property or through sysfs. In that
+ case, further calls to ``get_tag_protocol`` should report the protocol in
+ current use.
+
+- ``setup``: setup function for the switch, this function is responsible for setting
+ up the ``dsa_switch_ops`` private structure with all it needs: register maps,
+ interrupts, mutexes, locks, etc. This function is also expected to properly
+ configure the switch to separate all network interfaces from each other, that
+ is, they should be isolated by the switch hardware itself, typically by creating
+ a Port-based VLAN ID for each port and allowing only the CPU port and the
+ specific port to be in the forwarding vector. Ports that are unused by the
+ platform should be disabled. Past this function, the switch is expected to be
+ fully configured and ready to serve any kind of request. It is recommended
+ to issue a software reset of the switch during this setup function in order to
+ avoid relying on what a previous software agent such as a bootloader/firmware
+ may have previously configured. The method responsible for undoing any
+ applicable allocations or operations done here is ``teardown``.
+
+- ``port_setup`` and ``port_teardown``: methods for initialization and
+ destruction of per-port data structures. It is mandatory for some operations
+ such as registering and unregistering devlink port regions to be done from
+ these methods, otherwise they are optional. A port will be torn down only if
+ it has been previously set up. It is possible for a port to be set up during
+ probing only to be torn down immediately afterwards, for example in case its
+ PHY cannot be found. In this case, probing of the DSA switch continues
+ without that particular port.
+
+- ``port_change_master``: method through which the affinity (association used
+ for traffic termination purposes) between a user port and a CPU port can be
+ changed. By default all user ports from a tree are assigned to the first
+ available CPU port that makes sense for them (most of the times this means
+ the user ports of a tree are all assigned to the same CPU port, except for H
+ topologies as described in commit 2c0b03258b8b). The ``port`` argument
+ represents the index of the user port, and the ``master`` argument represents
+ the new DSA master ``net_device``. The CPU port associated with the new
+ master can be retrieved by looking at ``struct dsa_port *cpu_dp =
+ master->dsa_ptr``. Additionally, the master can also be a LAG device where
+ all the slave devices are physical DSA masters. LAG DSA masters also have a
+ valid ``master->dsa_ptr`` pointer, however this is not unique, but rather a
+ duplicate of the first physical DSA master's (LAG slave) ``dsa_ptr``. In case
+ of a LAG DSA master, a further call to ``port_lag_join`` will be emitted
+ separately for the physical CPU ports associated with the physical DSA
+ masters, requesting them to create a hardware LAG associated with the LAG
+ interface.
+
+PHY devices and link management
+-------------------------------
+
+- ``get_phy_flags``: Some switches are interfaced to various kinds of Ethernet PHYs,
+ if the PHY library PHY driver needs to know about information it cannot obtain
+ on its own (e.g.: coming from switch memory mapped registers), this function
+ should return a 32-bit bitmask of "flags" that is private between the switch
+ driver and the Ethernet PHY driver in ``drivers/net/phy/\*``.
+
+- ``phy_read``: Function invoked by the DSA slave MDIO bus when attempting to read
+ the switch port MDIO registers. If unavailable, return 0xffff for each read.
+ For builtin switch Ethernet PHYs, this function should allow reading the link
+ status, auto-negotiation results, link partner pages, etc.
+
+- ``phy_write``: Function invoked by the DSA slave MDIO bus when attempting to write
+ to the switch port MDIO registers. If unavailable return a negative error
+ code.
+
+- ``adjust_link``: Function invoked by the PHY library when a slave network device
+ is attached to a PHY device. This function is responsible for appropriately
+ configuring the switch port link parameters: speed, duplex, pause based on
+ what the ``phy_device`` is providing.
+
+- ``fixed_link_update``: Function invoked by the PHY library, and specifically by
+ the fixed PHY driver asking the switch driver for link parameters that could
+ not be auto-negotiated, or obtained by reading the PHY registers through MDIO.
+ This is particularly useful for specific kinds of hardware such as QSGMII,
+ MoCA or other kinds of non-MDIO managed PHYs where out of band link
+ information is obtained
+
+Ethtool operations
+------------------
+
+- ``get_strings``: ethtool function used to query the driver's strings, will
+ typically return statistics strings, private flags strings, etc.
+
+- ``get_ethtool_stats``: ethtool function used to query per-port statistics and
+ return their values. DSA overlays slave network devices general statistics:
+ RX/TX counters from the network device, with switch driver specific statistics
+ per port
+
+- ``get_sset_count``: ethtool function used to query the number of statistics items
+
+- ``get_wol``: ethtool function used to obtain Wake-on-LAN settings per-port, this
+ function may for certain implementations also query the master network device
+ Wake-on-LAN settings if this interface needs to participate in Wake-on-LAN
+
+- ``set_wol``: ethtool function used to configure Wake-on-LAN settings per-port,
+ direct counterpart to set_wol with similar restrictions
+
+- ``set_eee``: ethtool function which is used to configure a switch port EEE (Green
+ Ethernet) settings, can optionally invoke the PHY library to enable EEE at the
+ PHY level if relevant. This function should enable EEE at the switch port MAC
+ controller and data-processing logic
+
+- ``get_eee``: ethtool function which is used to query a switch port EEE settings,
+ this function should return the EEE state of the switch port MAC controller
+ and data-processing logic as well as query the PHY for its currently configured
+ EEE settings
+
+- ``get_eeprom_len``: ethtool function returning for a given switch the EEPROM
+ length/size in bytes
+
+- ``get_eeprom``: ethtool function returning for a given switch the EEPROM contents
+
+- ``set_eeprom``: ethtool function writing specified data to a given switch EEPROM
+
+- ``get_regs_len``: ethtool function returning the register length for a given
+ switch
+
+- ``get_regs``: ethtool function returning the Ethernet switch internal register
+ contents. This function might require user-land code in ethtool to
+ pretty-print register values and registers
+
+Power management
+----------------
+
+- ``suspend``: function invoked by the DSA platform device when the system goes to
+ suspend, should quiesce all Ethernet switch activities, but keep ports
+ participating in Wake-on-LAN active as well as additional wake-up logic if
+ supported
+
+- ``resume``: function invoked by the DSA platform device when the system resumes,
+ should resume all Ethernet switch activities and re-configure the switch to be
+ in a fully active state
+
+- ``port_enable``: function invoked by the DSA slave network device ndo_open
+ function when a port is administratively brought up, this function should
+ fully enable a given switch port. DSA takes care of marking the port with
+ ``BR_STATE_BLOCKING`` if the port is a bridge member, or ``BR_STATE_FORWARDING`` if it
+ was not, and propagating these changes down to the hardware
+
+- ``port_disable``: function invoked by the DSA slave network device ndo_close
+ function when a port is administratively brought down, this function should
+ fully disable a given switch port. DSA takes care of marking the port with
+ ``BR_STATE_DISABLED`` and propagating changes to the hardware if this port is
+ disabled while being a bridge member
+
+Address databases
+-----------------
+
+Switching hardware is expected to have a table for FDB entries, however not all
+of them are active at the same time. An address database is the subset (partition)
+of FDB entries that is active (can be matched by address learning on RX, or FDB
+lookup on TX) depending on the state of the port. An address database may
+occasionally be called "FID" (Filtering ID) in this document, although the
+underlying implementation may choose whatever is available to the hardware.
+
+For example, all ports that belong to a VLAN-unaware bridge (which is
+*currently* VLAN-unaware) are expected to learn source addresses in the
+database associated by the driver with that bridge (and not with other
+VLAN-unaware bridges). During forwarding and FDB lookup, a packet received on a
+VLAN-unaware bridge port should be able to find a VLAN-unaware FDB entry having
+the same MAC DA as the packet, which is present on another port member of the
+same bridge. At the same time, the FDB lookup process must be able to not find
+an FDB entry having the same MAC DA as the packet, if that entry points towards
+a port which is a member of a different VLAN-unaware bridge (and is therefore
+associated with a different address database).
+
+Similarly, each VLAN of each offloaded VLAN-aware bridge should have an
+associated address database, which is shared by all ports which are members of
+that VLAN, but not shared by ports belonging to different bridges that are
+members of the same VID.
+
+In this context, a VLAN-unaware database means that all packets are expected to
+match on it irrespective of VLAN ID (only MAC address lookup), whereas a
+VLAN-aware database means that packets are supposed to match based on the VLAN
+ID from the classified 802.1Q header (or the pvid if untagged).
+
+At the bridge layer, VLAN-unaware FDB entries have the special VID value of 0,
+whereas VLAN-aware FDB entries have non-zero VID values. Note that a
+VLAN-unaware bridge may have VLAN-aware (non-zero VID) FDB entries, and a
+VLAN-aware bridge may have VLAN-unaware FDB entries. As in hardware, the
+software bridge keeps separate address databases, and offloads to hardware the
+FDB entries belonging to these databases, through switchdev, asynchronously
+relative to the moment when the databases become active or inactive.
+
+When a user port operates in standalone mode, its driver should configure it to
+use a separate database called a port private database. This is different from
+the databases described above, and should impede operation as standalone port
+(packet in, packet out to the CPU port) as little as possible. For example,
+on ingress, it should not attempt to learn the MAC SA of ingress traffic, since
+learning is a bridging layer service and this is a standalone port, therefore
+it would consume useless space. With no address learning, the port private
+database should be empty in a naive implementation, and in this case, all
+received packets should be trivially flooded to the CPU port.
+
+DSA (cascade) and CPU ports are also called "shared" ports because they service
+multiple address databases, and the database that a packet should be associated
+to is usually embedded in the DSA tag. This means that the CPU port may
+simultaneously transport packets coming from a standalone port (which were
+classified by hardware in one address database), and from a bridge port (which
+were classified to a different address database).
+
+Switch drivers which satisfy certain criteria are able to optimize the naive
+configuration by removing the CPU port from the flooding domain of the switch,
+and just program the hardware with FDB entries pointing towards the CPU port
+for which it is known that software is interested in those MAC addresses.
+Packets which do not match a known FDB entry will not be delivered to the CPU,
+which will save CPU cycles required for creating an skb just to drop it.
+
+DSA is able to perform host address filtering for the following kinds of
+addresses:
+
+- Primary unicast MAC addresses of ports (``dev->dev_addr``). These are
+ associated with the port private database of the respective user port,
+ and the driver is notified to install them through ``port_fdb_add`` towards
+ the CPU port.
+
+- Secondary unicast and multicast MAC addresses of ports (addresses added
+ through ``dev_uc_add()`` and ``dev_mc_add()``). These are also associated
+ with the port private database of the respective user port.
+
+- Local/permanent bridge FDB entries (``BR_FDB_LOCAL``). These are the MAC
+ addresses of the bridge ports, for which packets must be terminated locally
+ and not forwarded. They are associated with the address database for that
+ bridge.
+
+- Static bridge FDB entries installed towards foreign (non-DSA) interfaces
+ present in the same bridge as some DSA switch ports. These are also
+ associated with the address database for that bridge.
+
+- Dynamically learned FDB entries on foreign interfaces present in the same
+ bridge as some DSA switch ports, only if ``ds->assisted_learning_on_cpu_port``
+ is set to true by the driver. These are associated with the address database
+ for that bridge.
+
+For various operations detailed below, DSA provides a ``dsa_db`` structure
+which can be of the following types:
+
+- ``DSA_DB_PORT``: the FDB (or MDB) entry to be installed or deleted belongs to
+ the port private database of user port ``db->dp``.
+- ``DSA_DB_BRIDGE``: the entry belongs to one of the address databases of bridge
+ ``db->bridge``. Separation between the VLAN-unaware database and the per-VID
+ databases of this bridge is expected to be done by the driver.
+- ``DSA_DB_LAG``: the entry belongs to the address database of LAG ``db->lag``.
+ Note: ``DSA_DB_LAG`` is currently unused and may be removed in the future.
+
+The drivers which act upon the ``dsa_db`` argument in ``port_fdb_add``,
+``port_mdb_add`` etc should declare ``ds->fdb_isolation`` as true.
+
+DSA associates each offloaded bridge and each offloaded LAG with a one-based ID
+(``struct dsa_bridge :: num``, ``struct dsa_lag :: id``) for the purposes of
+refcounting addresses on shared ports. Drivers may piggyback on DSA's numbering
+scheme (the ID is readable through ``db->bridge.num`` and ``db->lag.id`` or may
+implement their own.
+
+Only the drivers which declare support for FDB isolation are notified of FDB
+entries on the CPU port belonging to ``DSA_DB_PORT`` databases.
+For compatibility/legacy reasons, ``DSA_DB_BRIDGE`` addresses are notified to
+drivers even if they do not support FDB isolation. However, ``db->bridge.num``
+and ``db->lag.id`` are always set to 0 in that case (to denote the lack of
+isolation, for refcounting purposes).
+
+Note that it is not mandatory for a switch driver to implement physically
+separate address databases for each standalone user port. Since FDB entries in
+the port private databases will always point to the CPU port, there is no risk
+for incorrect forwarding decisions. In this case, all standalone ports may
+share the same database, but the reference counting of host-filtered addresses
+(not deleting the FDB entry for a port's MAC address if it's still in use by
+another port) becomes the responsibility of the driver, because DSA is unaware
+that the port databases are in fact shared. This can be achieved by calling
+``dsa_fdb_present_in_other_db()`` and ``dsa_mdb_present_in_other_db()``.
+The down side is that the RX filtering lists of each user port are in fact
+shared, which means that user port A may accept a packet with a MAC DA it
+shouldn't have, only because that MAC address was in the RX filtering list of
+user port B. These packets will still be dropped in software, however.
+
+Bridge layer
+------------
+
+Offloading the bridge forwarding plane is optional and handled by the methods
+below. They may be absent, return -EOPNOTSUPP, or ``ds->max_num_bridges`` may
+be non-zero and exceeded, and in this case, joining a bridge port is still
+possible, but the packet forwarding will take place in software, and the ports
+under a software bridge must remain configured in the same way as for
+standalone operation, i.e. have all bridging service functions (address
+learning etc) disabled, and send all received packets to the CPU port only.
+
+Concretely, a port starts offloading the forwarding plane of a bridge once it
+returns success to the ``port_bridge_join`` method, and stops doing so after
+``port_bridge_leave`` has been called. Offloading the bridge means autonomously
+learning FDB entries in accordance with the software bridge port's state, and
+autonomously forwarding (or flooding) received packets without CPU intervention.
+This is optional even when offloading a bridge port. Tagging protocol drivers
+are expected to call ``dsa_default_offload_fwd_mark(skb)`` for packets which
+have already been autonomously forwarded in the forwarding domain of the
+ingress switch port. DSA, through ``dsa_port_devlink_setup()``, considers all
+switch ports part of the same tree ID to be part of the same bridge forwarding
+domain (capable of autonomous forwarding to each other).
+
+Offloading the TX forwarding process of a bridge is a distinct concept from
+simply offloading its forwarding plane, and refers to the ability of certain
+driver and tag protocol combinations to transmit a single skb coming from the
+bridge device's transmit function to potentially multiple egress ports (and
+thereby avoid its cloning in software).
+
+Packets for which the bridge requests this behavior are called data plane
+packets and have ``skb->offload_fwd_mark`` set to true in the tag protocol
+driver's ``xmit`` function. Data plane packets are subject to FDB lookup,
+hardware learning on the CPU port, and do not override the port STP state.
+Additionally, replication of data plane packets (multicast, flooding) is
+handled in hardware and the bridge driver will transmit a single skb for each
+packet that may or may not need replication.
+
+When the TX forwarding offload is enabled, the tag protocol driver is
+responsible to inject packets into the data plane of the hardware towards the
+correct bridging domain (FID) that the port is a part of. The port may be
+VLAN-unaware, and in this case the FID must be equal to the FID used by the
+driver for its VLAN-unaware address database associated with that bridge.
+Alternatively, the bridge may be VLAN-aware, and in that case, it is guaranteed
+that the packet is also VLAN-tagged with the VLAN ID that the bridge processed
+this packet in. It is the responsibility of the hardware to untag the VID on
+the egress-untagged ports, or keep the tag on the egress-tagged ones.
+
+- ``port_bridge_join``: bridge layer function invoked when a given switch port is
+ added to a bridge, this function should do what's necessary at the switch
+ level to permit the joining port to be added to the relevant logical
+ domain for it to ingress/egress traffic with other members of the bridge.
+ By setting the ``tx_fwd_offload`` argument to true, the TX forwarding process
+ of this bridge is also offloaded.
+
+- ``port_bridge_leave``: bridge layer function invoked when a given switch port is
+ removed from a bridge, this function should do what's necessary at the
+ switch level to deny the leaving port from ingress/egress traffic from the
+ remaining bridge members.
+
+- ``port_stp_state_set``: bridge layer function invoked when a given switch port STP
+ state is computed by the bridge layer and should be propagated to switch
+ hardware to forward/block/learn traffic.
+
+- ``port_bridge_flags``: bridge layer function invoked when a port must
+ configure its settings for e.g. flooding of unknown traffic or source address
+ learning. The switch driver is responsible for initial setup of the
+ standalone ports with address learning disabled and egress flooding of all
+ types of traffic, then the DSA core notifies of any change to the bridge port
+ flags when the port joins and leaves a bridge. DSA does not currently manage
+ the bridge port flags for the CPU port. The assumption is that address
+ learning should be statically enabled (if supported by the hardware) on the
+ CPU port, and flooding towards the CPU port should also be enabled, due to a
+ lack of an explicit address filtering mechanism in the DSA core.
+
+- ``port_fast_age``: bridge layer function invoked when flushing the
+ dynamically learned FDB entries on the port is necessary. This is called when
+ transitioning from an STP state where learning should take place to an STP
+ state where it shouldn't, or when leaving a bridge, or when address learning
+ is turned off via ``port_bridge_flags``.
+
+Bridge VLAN filtering
+---------------------
+
+- ``port_vlan_filtering``: bridge layer function invoked when the bridge gets
+ configured for turning on or off VLAN filtering. If nothing specific needs to
+ be done at the hardware level, this callback does not need to be implemented.
+ When VLAN filtering is turned on, the hardware must be programmed with
+ rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed
+ VLAN ID map/rules. If there is no PVID programmed into the switch port,
+ untagged frames must be rejected as well. When turned off the switch must
+ accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are
+ allowed.
+
+- ``port_vlan_add``: bridge layer function invoked when a VLAN is configured
+ (tagged or untagged) for the given switch port. The CPU port becomes a member
+ of a VLAN only if a foreign bridge port is also a member of it (and
+ forwarding needs to take place in software), or the VLAN is installed to the
+ VLAN group of the bridge device itself, for termination purposes
+ (``bridge vlan add dev br0 vid 100 self``). VLANs on shared ports are
+ reference counted and removed when there is no user left. Drivers do not need
+ to manually install a VLAN on the CPU port.
+
+- ``port_vlan_del``: bridge layer function invoked when a VLAN is removed from the
+ given switch port
+
+- ``port_fdb_add``: bridge layer function invoked when the bridge wants to install a
+ Forwarding Database entry, the switch hardware should be programmed with the
+ specified address in the specified VLAN Id in the forwarding database
+ associated with this VLAN ID.
+
+- ``port_fdb_del``: bridge layer function invoked when the bridge wants to remove a
+ Forwarding Database entry, the switch hardware should be programmed to delete
+ the specified MAC address from the specified VLAN ID if it was mapped into
+ this port forwarding database
+
+- ``port_fdb_dump``: bridge bypass function invoked by ``ndo_fdb_dump`` on the
+ physical DSA port interfaces. Since DSA does not attempt to keep in sync its
+ hardware FDB entries with the software bridge, this method is implemented as
+ a means to view the entries visible on user ports in the hardware database.
+ The entries reported by this function have the ``self`` flag in the output of
+ the ``bridge fdb show`` command.
+
+- ``port_mdb_add``: bridge layer function invoked when the bridge wants to install
+ a multicast database entry. The switch hardware should be programmed with the
+ specified address in the specified VLAN ID in the forwarding database
+ associated with this VLAN ID.
+
+- ``port_mdb_del``: bridge layer function invoked when the bridge wants to remove a
+ multicast database entry, the switch hardware should be programmed to delete
+ the specified MAC address from the specified VLAN ID if it was mapped into
+ this port forwarding database.
+
+Link aggregation
+----------------
+
+Link aggregation is implemented in the Linux networking stack by the bonding
+and team drivers, which are modeled as virtual, stackable network interfaces.
+DSA is capable of offloading a link aggregation group (LAG) to hardware that
+supports the feature, and supports bridging between physical ports and LAGs,
+as well as between LAGs. A bonding/team interface which holds multiple physical
+ports constitutes a logical port, although DSA has no explicit concept of a
+logical port at the moment. Due to this, events where a LAG joins/leaves a
+bridge are treated as if all individual physical ports that are members of that
+LAG join/leave the bridge. Switchdev port attributes (VLAN filtering, STP
+state, etc) and objects (VLANs, MDB entries) offloaded to a LAG as bridge port
+are treated similarly: DSA offloads the same switchdev object / port attribute
+on all members of the LAG. Static bridge FDB entries on a LAG are not yet
+supported, since the DSA driver API does not have the concept of a logical port
+ID.
+
+- ``port_lag_join``: function invoked when a given switch port is added to a
+ LAG. The driver may return ``-EOPNOTSUPP``, and in this case, DSA will fall
+ back to a software implementation where all traffic from this port is sent to
+ the CPU.
+- ``port_lag_leave``: function invoked when a given switch port leaves a LAG
+ and returns to operation as a standalone port.
+- ``port_lag_change``: function invoked when the link state of any member of
+ the LAG changes, and the hashing function needs rebalancing to only make use
+ of the subset of physical LAG member ports that are up.
+
+Drivers that benefit from having an ID associated with each offloaded LAG
+can optionally populate ``ds->num_lag_ids`` from the ``dsa_switch_ops::setup``
+method. The LAG ID associated with a bonding/team interface can then be
+retrieved by a DSA switch driver using the ``dsa_lag_id`` function.
+
+IEC 62439-2 (MRP)
+-----------------
+
+The Media Redundancy Protocol is a topology management protocol optimized for
+fast fault recovery time for ring networks, which has some components
+implemented as a function of the bridge driver. MRP uses management PDUs
+(Test, Topology, LinkDown/Up, Option) sent at a multicast destination MAC
+address range of 01:15:4e:00:00:0x and with an EtherType of 0x88e3.
+Depending on the node's role in the ring (MRM: Media Redundancy Manager,
+MRC: Media Redundancy Client, MRA: Media Redundancy Automanager), certain MRP
+PDUs might need to be terminated locally and others might need to be forwarded.
+An MRM might also benefit from offloading to hardware the creation and
+transmission of certain MRP PDUs (Test).
+
+Normally an MRP instance can be created on top of any network interface,
+however in the case of a device with an offloaded data path such as DSA, it is
+necessary for the hardware, even if it is not MRP-aware, to be able to extract
+the MRP PDUs from the fabric before the driver can proceed with the software
+implementation. DSA today has no driver which is MRP-aware, therefore it only
+listens for the bare minimum switchdev objects required for the software assist
+to work properly. The operations are detailed below.
+
+- ``port_mrp_add`` and ``port_mrp_del``: notifies driver when an MRP instance
+ with a certain ring ID, priority, primary port and secondary port is
+ created/deleted.
+- ``port_mrp_add_ring_role`` and ``port_mrp_del_ring_role``: function invoked
+ when an MRP instance changes ring roles between MRM or MRC. This affects
+ which MRP PDUs should be trapped to software and which should be autonomously
+ forwarded.
+
+IEC 62439-3 (HSR/PRP)
+---------------------
+
+The Parallel Redundancy Protocol (PRP) is a network redundancy protocol which
+works by duplicating and sequence numbering packets through two independent L2
+networks (which are unaware of the PRP tail tags carried in the packets), and
+eliminating the duplicates at the receiver. The High-availability Seamless
+Redundancy (HSR) protocol is similar in concept, except all nodes that carry
+the redundant traffic are aware of the fact that it is HSR-tagged (because HSR
+uses a header with an EtherType of 0x892f) and are physically connected in a
+ring topology. Both HSR and PRP use supervision frames for monitoring the
+health of the network and for discovery of other nodes.
+
+In Linux, both HSR and PRP are implemented in the hsr driver, which
+instantiates a virtual, stackable network interface with two member ports.
+The driver only implements the basic roles of DANH (Doubly Attached Node
+implementing HSR) and DANP (Doubly Attached Node implementing PRP); the roles
+of RedBox and QuadBox are not implemented (therefore, bridging a hsr network
+interface with a physical switch port does not produce the expected result).
+
+A driver which is able of offloading certain functions of a DANP or DANH should
+declare the corresponding netdev features as indicated by the documentation at
+``Documentation/networking/netdev-features.rst``. Additionally, the following
+methods must be implemented:
+
+- ``port_hsr_join``: function invoked when a given switch port is added to a
+ DANP/DANH. The driver may return ``-EOPNOTSUPP`` and in this case, DSA will
+ fall back to a software implementation where all traffic from this port is
+ sent to the CPU.
+- ``port_hsr_leave``: function invoked when a given switch port leaves a
+ DANP/DANH and returns to normal operation as a standalone port.
+
+TODO
+====
+
+Making SWITCHDEV and DSA converge towards an unified codebase
+-------------------------------------------------------------
+
+SWITCHDEV properly takes care of abstracting the networking stack with offload
+capable hardware, but does not enforce a strict switch device driver model. On
+the other DSA enforces a fairly strict device driver model, and deals with most
+of the switch specific. At some point we should envision a merger between these
+two subsystems and get the best of both worlds.