diff options
Diffstat (limited to 'Documentation/virt/kvm/arm/hypercalls.rst')
| -rw-r--r-- | Documentation/virt/kvm/arm/hypercalls.rst | 138 |
1 files changed, 138 insertions, 0 deletions
diff --git a/Documentation/virt/kvm/arm/hypercalls.rst b/Documentation/virt/kvm/arm/hypercalls.rst new file mode 100644 index 000000000..3e2308464 --- /dev/null +++ b/Documentation/virt/kvm/arm/hypercalls.rst @@ -0,0 +1,138 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +ARM Hypercall Interface +======================= + +KVM handles the hypercall services as requested by the guests. New hypercall +services are regularly made available by the ARM specification or by KVM (as +vendor services) if they make sense from a virtualization point of view. + +This means that a guest booted on two different versions of KVM can observe +two different "firmware" revisions. This could cause issues if a given guest +is tied to a particular version of a hypercall service, or if a migration +causes a different version to be exposed out of the blue to an unsuspecting +guest. + +In order to remedy this situation, KVM exposes a set of "firmware +pseudo-registers" that can be manipulated using the GET/SET_ONE_REG +interface. These registers can be saved/restored by userspace, and set +to a convenient value as required. + +The following registers are defined: + +* KVM_REG_ARM_PSCI_VERSION: + + KVM implements the PSCI (Power State Coordination Interface) + specification in order to provide services such as CPU on/off, reset + and power-off to the guest. + + - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set + (and thus has already been initialized) + - Returns the current PSCI version on GET_ONE_REG (defaulting to the + highest PSCI version implemented by KVM and compatible with v0.2) + - Allows any PSCI version implemented by KVM and compatible with + v0.2 to be set with SET_ONE_REG + - Affects the whole VM (even if the register view is per-vcpu) + +* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1: + Holds the state of the firmware support to mitigate CVE-2017-5715, as + offered by KVM to the guest via a HVC call. The workaround is described + under SMCCC_ARCH_WORKAROUND_1 in [1]. + + Accepted values are: + + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL: + KVM does not offer + firmware support for the workaround. The mitigation status for the + guest is unknown. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL: + The workaround HVC call is + available to the guest and required for the mitigation. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED: + The workaround HVC call + is available to the guest, but it is not needed on this VCPU. + +* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2: + Holds the state of the firmware support to mitigate CVE-2018-3639, as + offered by KVM to the guest via a HVC call. The workaround is described + under SMCCC_ARCH_WORKAROUND_2 in [1]_. + + Accepted values are: + + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL: + A workaround is not + available. KVM does not offer firmware support for the workaround. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN: + The workaround state is + unknown. KVM does not offer firmware support for the workaround. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL: + The workaround is available, + and can be disabled by a vCPU. If + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for + this vCPU. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED: + The workaround is always active on this vCPU or it is not needed. + + +Bitmap Feature Firmware Registers +--------------------------------- + +Contrary to the above registers, the following registers exposes the +hypercall services in the form of a feature-bitmap to the userspace. This +bitmap is translated to the services that are available to the guest. +There is a register defined per service call owner and can be accessed via +GET/SET_ONE_REG interface. + +By default, these registers are set with the upper limit of the features +that are supported. This way userspace can discover all the usable +hypercall services via GET_ONE_REG. The user-space can write-back the +desired bitmap back via SET_ONE_REG. The features for the registers that +are untouched, probably because userspace isn't aware of them, will be +exposed as is to the guest. + +Note that KVM will not allow the userspace to configure the registers +anymore once any of the vCPUs has run at least once. Instead, it will +return a -EBUSY. + +The pseudo-firmware bitmap register are as follows: + +* KVM_REG_ARM_STD_BMAP: + Controls the bitmap of the ARM Standard Secure Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0: + The bit represents the services offered under v1.0 of ARM True Random + Number Generator (TRNG) specification, ARM DEN0098. + +* KVM_REG_ARM_STD_HYP_BMAP: + Controls the bitmap of the ARM Standard Hypervisor Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME: + The bit represents the Paravirtualized Time service as represented by + ARM DEN0057A. + +* KVM_REG_ARM_VENDOR_HYP_BMAP: + Controls the bitmap of the Vendor specific Hypervisor Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT + The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID + and ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID function-ids. + + Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP: + The bit represents the Precision Time Protocol KVM service. + +Errors: + + ======= ============================================================= + -ENOENT Unknown register accessed. + -EBUSY Attempt a 'write' to the register after the VM has started. + -EINVAL Invalid bitmap written to the register. + ======= ============================================================= + +.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf |