1 files changed, 225 insertions, 0 deletions
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
new file mode 100644
index 000000000..d17e44c99
--- /dev/null
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Alpha specific irq code.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+
+#include <asm/machvec.h>
+#include <asm/dma.h>
+#include <asm/perf_event.h>
+#include <asm/mce.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+
+/* Hack minimum IPL during interrupt processing for broken hardware.  */
+#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
+int __min_ipl;
+EXPORT_SYMBOL(__min_ipl);
+#endif
+
+/*
+ * Performance counter hook.  A module can override this to
+ * do something useful.
+ */
+static void
+dummy_perf(unsigned long vector, struct pt_regs *regs)
+{
+	irq_err_count++;
+	printk(KERN_CRIT "Performance counter interrupt!\n");
+}
+
+void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf;
+EXPORT_SYMBOL(perf_irq);
+
+/*
+ * The main interrupt entry point.
+ */
+
+asmlinkage void 
+do_entInt(unsigned long type, unsigned long vector,
+	  unsigned long la_ptr, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+
+	/*
+	 * Disable interrupts during IRQ handling.
+	 * Note that there is no matching local_irq_enable() due to
+	 * severe problems with RTI at IPL0 and some MILO PALcode
+	 * (namely LX164).
+	 */
+	local_irq_disable();
+	switch (type) {
+	case 0:
+#ifdef CONFIG_SMP
+		handle_ipi(regs);
+		return;
+#else
+		irq_err_count++;
+		printk(KERN_CRIT "Interprocessor interrupt? "
+		       "You must be kidding!\n");
+#endif
+		break;
+	case 1:
+		old_regs = set_irq_regs(regs);
+		handle_irq(RTC_IRQ);
+		set_irq_regs(old_regs);
+		return;
+	case 2:
+		old_regs = set_irq_regs(regs);
+		alpha_mv.machine_check(vector, la_ptr);
+		set_irq_regs(old_regs);
+		return;
+	case 3:
+		old_regs = set_irq_regs(regs);
+		alpha_mv.device_interrupt(vector);
+		set_irq_regs(old_regs);
+		return;
+	case 4:
+		perf_irq(la_ptr, regs);
+		return;
+	default:
+		printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n",
+		       type, vector);
+	}
+	printk(KERN_CRIT "PC = %016lx PS=%04lx\n", regs->pc, regs->ps);
+}
+
+void __init
+common_init_isa_dma(void)
+{
+	outb(0, DMA1_RESET_REG);
+	outb(0, DMA2_RESET_REG);
+	outb(0, DMA1_CLR_MASK_REG);
+	outb(0, DMA2_CLR_MASK_REG);
+}
+
+void __init
+init_IRQ(void)
+{
+	/* Just in case the platform init_irq() causes interrupts/mchecks
+	   (as is the case with RAWHIDE, at least).  */
+	wrent(entInt, 0);
+
+	alpha_mv.init_irq();
+}
+
+/*
+ * machine error checks
+ */
+#define MCHK_K_TPERR           0x0080
+#define MCHK_K_TCPERR          0x0082
+#define MCHK_K_HERR            0x0084
+#define MCHK_K_ECC_C           0x0086
+#define MCHK_K_ECC_NC          0x0088
+#define MCHK_K_OS_BUGCHECK     0x008A
+#define MCHK_K_PAL_BUGCHECK    0x0090
+
+#ifndef CONFIG_SMP
+struct mcheck_info __mcheck_info;
+#endif
+
+void
+process_mcheck_info(unsigned long vector, unsigned long la_ptr,
+		    const char *machine, int expected)
+{
+	struct el_common *mchk_header;
+	const char *reason;
+
+	/*
+	 * See if the machine check is due to a badaddr() and if so,
+	 * ignore it.
+	 */
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
+		printk(KERN_CRIT "%s machine check %s\n", machine,
+		       expected ? "expected." : "NOT expected!!!");
+	}
+#endif
+
+	if (expected) {
+		int cpu = smp_processor_id();
+		mcheck_expected(cpu) = 0;
+		mcheck_taken(cpu) = 1;
+		return;
+	}
+
+	mchk_header = (struct el_common *)la_ptr;
+
+	printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%x\n",
+	       machine, vector, get_irq_regs()->pc, mchk_header->code);
+
+	switch (mchk_header->code) {
+	/* Machine check reasons.  Defined according to PALcode sources.  */
+	case 0x80: reason = "tag parity error"; break;
+	case 0x82: reason = "tag control parity error"; break;
+	case 0x84: reason = "generic hard error"; break;
+	case 0x86: reason = "correctable ECC error"; break;
+	case 0x88: reason = "uncorrectable ECC error"; break;
+	case 0x8A: reason = "OS-specific PAL bugcheck"; break;
+	case 0x90: reason = "callsys in kernel mode"; break;
+	case 0x96: reason = "i-cache read retryable error"; break;
+	case 0x98: reason = "processor detected hard error"; break;
+	
+	/* System specific (these are for Alcor, at least): */
+	case 0x202: reason = "system detected hard error"; break;
+	case 0x203: reason = "system detected uncorrectable ECC error"; break;
+	case 0x204: reason = "SIO SERR occurred on PCI bus"; break;
+	case 0x205: reason = "parity error detected by core logic"; break;
+	case 0x206: reason = "SIO IOCHK occurred on ISA bus"; break;
+	case 0x207: reason = "non-existent memory error"; break;
+	case 0x208: reason = "MCHK_K_DCSR"; break;
+	case 0x209: reason = "PCI SERR detected"; break;
+	case 0x20b: reason = "PCI data parity error detected"; break;
+	case 0x20d: reason = "PCI address parity error detected"; break;
+	case 0x20f: reason = "PCI master abort error"; break;
+	case 0x211: reason = "PCI target abort error"; break;
+	case 0x213: reason = "scatter/gather PTE invalid error"; break;
+	case 0x215: reason = "flash ROM write error"; break;
+	case 0x217: reason = "IOA timeout detected"; break;
+	case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break;
+	case 0x21b: reason = "EISA fail-safe timer timeout"; break;
+	case 0x21d: reason = "EISA bus time-out"; break;
+	case 0x21f: reason = "EISA software generated NMI"; break;
+	case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break;
+	default: reason = "unknown"; break;
+	}
+
+	printk(KERN_CRIT "machine check type: %s%s\n",
+	       reason, mchk_header->retry ? " (retryable)" : "");
+
+	dik_show_regs(get_irq_regs(), NULL);
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
+		/* Dump the logout area to give all info.  */
+		unsigned long *ptr = (unsigned long *)la_ptr;
+		long i;
+		for (i = 0; i < mchk_header->size / sizeof(long); i += 2) {
+			printk(KERN_CRIT "   +%8lx %016lx %016lx\n",
+			       i*sizeof(long), ptr[i], ptr[i+1]);
+		}
+	}
+#endif /* CONFIG_VERBOSE_MCHECK */
+}
+
+/*
+ * The special RTC interrupt type.  The interrupt itself was
+ * processed by PALcode, and comes in via entInt vector 1.
+ */
+void __init
+init_rtc_irq(irq_handler_t handler)
+{
+	irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip,
+				      handle_percpu_irq, "RTC");
+	if (!handler)
+		handler = rtc_timer_interrupt;
+	if (request_irq(RTC_IRQ, handler, 0, "timer", NULL))
+		pr_err("Failed to register timer interrupt\n");
+}