summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ep93xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ep93xx')
-rw-r--r--arch/arm/mach-ep93xx/Kconfig171
-rw-r--r--arch/arm/mach-ep93xx/Makefile16
-rw-r--r--arch/arm/mach-ep93xx/adssphere.c41
-rw-r--r--arch/arm/mach-ep93xx/clock.c733
-rw-r--r--arch/arm/mach-ep93xx/core.c1008
-rw-r--r--arch/arm/mach-ep93xx/dma.c114
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c344
-rw-r--r--arch/arm/mach-ep93xx/ep93xx-regs.h38
-rw-r--r--arch/arm/mach-ep93xx/gesbc9312.c41
-rw-r--r--arch/arm/mach-ep93xx/gpio-ep93xx.h111
-rw-r--r--arch/arm/mach-ep93xx/hardware.h25
-rw-r--r--arch/arm/mach-ep93xx/irqs.h76
-rw-r--r--arch/arm/mach-ep93xx/micro9.c125
-rw-r--r--arch/arm/mach-ep93xx/platform.h42
-rw-r--r--arch/arm/mach-ep93xx/simone.c128
-rw-r--r--arch/arm/mach-ep93xx/snappercl15.c162
-rw-r--r--arch/arm/mach-ep93xx/soc.h212
-rw-r--r--arch/arm/mach-ep93xx/timer-ep93xx.c143
-rw-r--r--arch/arm/mach-ep93xx/ts72xx.c422
-rw-r--r--arch/arm/mach-ep93xx/ts72xx.h94
-rw-r--r--arch/arm/mach-ep93xx/vision_ep9307.c311
21 files changed, 4357 insertions, 0 deletions
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
new file mode 100644
index 000000000..2c40996a4
--- /dev/null
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_EP93XX
+ bool "EP93xx-based"
+ depends on ATAGS
+ depends on ARCH_MULTI_V4T
+ depends on CPU_LITTLE_ENDIAN
+ select ARCH_SPARSEMEM_ENABLE
+ select ARM_AMBA
+ select ARM_VIC
+ select CLKSRC_MMIO
+ select CPU_ARM920T
+ select GPIOLIB
+ help
+ This enables support for the Cirrus EP93xx series of CPUs.
+
+if ARCH_EP93XX
+
+menu "Cirrus EP93xx Implementation Options"
+
+config EP93XX_SOC_COMMON
+ bool
+ default y
+ select SOC_BUS
+ select LEDS_GPIO_REGISTER
+
+comment "EP93xx Platforms"
+
+config MACH_ADSSPHERE
+ bool "Support ADS Sphere"
+ depends on UNUSED_BOARD_FILES
+ help
+ Say 'Y' here if you want your kernel to support the ADS
+ Sphere board.
+
+config MACH_BK3
+ bool "Support Liebherr BK3.1"
+ select MACH_TS72XX
+ help
+ Say 'Y' here if you want your kernel to support the
+ Liebherr controller BK3.1.
+
+config MACH_EDB93XX
+ bool
+
+config MACH_EDB9301
+ bool "Support Cirrus Logic EDB9301"
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9301 Evaluation Board.
+
+config MACH_EDB9302
+ bool "Support Cirrus Logic EDB9302"
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9302 Evaluation Board.
+
+config MACH_EDB9302A
+ bool "Support Cirrus Logic EDB9302A"
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9302A Evaluation Board.
+
+config MACH_EDB9307
+ bool "Support Cirrus Logic EDB9307"
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9307 Evaluation Board.
+
+config MACH_EDB9307A
+ bool "Support Cirrus Logic EDB9307A"
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9307A Evaluation Board.
+
+config MACH_EDB9312
+ bool "Support Cirrus Logic EDB9312"
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9312 Evaluation Board.
+
+config MACH_EDB9315
+ bool "Support Cirrus Logic EDB9315"
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9315 Evaluation Board.
+
+config MACH_EDB9315A
+ bool "Support Cirrus Logic EDB9315A"
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9315A Evaluation Board.
+
+config MACH_GESBC9312
+ bool "Support Glomation GESBC-9312-sx"
+ depends on UNUSED_BOARD_FILES
+ help
+ Say 'Y' here if you want your kernel to support the Glomation
+ GESBC-9312-sx board.
+
+config MACH_MICRO9
+ bool
+
+config MACH_MICRO9H
+ bool "Support Contec Micro9-High"
+ select MACH_MICRO9
+ depends on UNUSED_BOARD_FILES
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Micro9-High board.
+
+config MACH_MICRO9M
+ bool "Support Contec Micro9-Mid"
+ select MACH_MICRO9
+ depends on UNUSED_BOARD_FILES
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Micro9-Mid board.
+
+config MACH_MICRO9L
+ bool "Support Contec Micro9-Lite"
+ select MACH_MICRO9
+ depends on UNUSED_BOARD_FILES
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+ bool "Support Contec Micro9-Slim"
+ select MACH_MICRO9
+ depends on UNUSED_BOARD_FILES
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Micro9-Slim board.
+
+config MACH_SIM_ONE
+ bool "Support Simplemachines Sim.One board"
+ depends on UNUSED_BOARD_FILES
+ help
+ Say 'Y' here if you want your kernel to support the
+ Simplemachines Sim.One board.
+
+config MACH_SNAPPER_CL15
+ bool "Support Bluewater Systems Snapper CL15 Module"
+ depends on UNUSED_BOARD_FILES
+ help
+ Say 'Y' here if you want your kernel to support the Bluewater
+ Systems Snapper CL15 Module.
+
+config MACH_TS72XX
+ bool "Support Technologic Systems TS-72xx SBC"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Technologic Systems TS-72xx board.
+
+config MACH_VISION_EP9307
+ bool "Support Vision Engraving Systems EP9307 SoM"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Vision Engraving Systems EP9307 SoM.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
new file mode 100644
index 000000000..cfad517fa
--- /dev/null
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+obj-y := core.o clock.o timer-ep93xx.o
+
+obj-$(CONFIG_EP93XX_DMA) += dma.o
+
+obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o
+obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
+obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
+obj-$(CONFIG_MACH_MICRO9) += micro9.o
+obj-$(CONFIG_MACH_SIM_ONE) += simone.o
+obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
+obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
+obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
new file mode 100644
index 000000000..0c48d3c5b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-ep93xx/adssphere.c
+ * ADS Sphere support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+
+#include "hardware.h"
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "soc.h"
+
+static struct ep93xx_eth_data __initdata adssphere_eth_data = {
+ .phy_id = 1,
+};
+
+static void __init adssphere_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+ ep93xx_register_eth(&adssphere_eth_data, 1);
+}
+
+MACHINE_START(ADSSPHERE, "ADS Sphere board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = adssphere_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
new file mode 100644
index 000000000..85a496ddc
--- /dev/null
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-ep93xx/clock.c
+ * Clock control for Cirrus EP93xx chips.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/soc/cirrus/ep93xx.h>
+
+#include "hardware.h"
+
+#include <asm/div64.h>
+
+#include "soc.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
+static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
+static char pclk_divisors[] = { 1, 2, 4, 8 };
+
+static char adc_divisors[] = { 16, 4 };
+static char sclk_divisors[] = { 2, 4 };
+static char lrclk_divisors[] = { 32, 64, 128 };
+
+static const char * const mux_parents[] = {
+ "xtali",
+ "pll1",
+ "pll2"
+};
+
+/*
+ * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
+ */
+static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word)
+{
+ int i;
+
+ rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
+ rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
+ do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
+ for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */
+ rate >>= 1;
+
+ return (unsigned long)rate;
+}
+
+struct clk_psc {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 bit_idx;
+ u32 mask;
+ u8 shift;
+ u8 width;
+ char *div;
+ u8 num_div;
+ spinlock_t *lock;
+};
+
+#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw)
+
+static int ep93xx_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ u32 val = readl(psc->reg);
+
+ return (val & BIT(psc->bit_idx)) ? 1 : 0;
+}
+
+static int ep93xx_clk_enable(struct clk_hw *hw)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ if (psc->lock)
+ spin_lock_irqsave(psc->lock, flags);
+
+ val = __raw_readl(psc->reg);
+ val |= BIT(psc->bit_idx);
+
+ ep93xx_syscon_swlocked_write(val, psc->reg);
+
+ if (psc->lock)
+ spin_unlock_irqrestore(psc->lock, flags);
+
+ return 0;
+}
+
+static void ep93xx_clk_disable(struct clk_hw *hw)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ if (psc->lock)
+ spin_lock_irqsave(psc->lock, flags);
+
+ val = __raw_readl(psc->reg);
+ val &= ~BIT(psc->bit_idx);
+
+ ep93xx_syscon_swlocked_write(val, psc->reg);
+
+ if (psc->lock)
+ spin_unlock_irqrestore(psc->lock, flags);
+}
+
+static const struct clk_ops clk_ep93xx_gate_ops = {
+ .enable = ep93xx_clk_enable,
+ .disable = ep93xx_clk_disable,
+ .is_enabled = ep93xx_clk_is_enabled,
+};
+
+static struct clk_hw *ep93xx_clk_register_gate(const char *name,
+ const char *parent_name,
+ void __iomem *reg,
+ u8 bit_idx)
+{
+ struct clk_init_data init;
+ struct clk_psc *psc;
+ struct clk *clk;
+
+ psc = kzalloc(sizeof(*psc), GFP_KERNEL);
+ if (!psc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_ep93xx_gate_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ psc->reg = reg;
+ psc->bit_idx = bit_idx;
+ psc->hw.init = &init;
+ psc->lock = &clk_lock;
+
+ clk = clk_register(NULL, &psc->hw);
+ if (IS_ERR(clk)) {
+ kfree(psc);
+ return ERR_CAST(clk);
+ }
+
+ return &psc->hw;
+}
+
+static u8 ep93xx_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ u32 val = __raw_readl(psc->reg);
+
+ if (!(val & EP93XX_SYSCON_CLKDIV_ESEL))
+ return 0;
+
+ if (!(val & EP93XX_SYSCON_CLKDIV_PSEL))
+ return 1;
+
+ return 2;
+}
+
+static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ if (index >= ARRAY_SIZE(mux_parents))
+ return -EINVAL;
+
+ if (psc->lock)
+ spin_lock_irqsave(psc->lock, flags);
+
+ val = __raw_readl(psc->reg);
+ val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL);
+
+
+ if (index != 0) {
+ val |= EP93XX_SYSCON_CLKDIV_ESEL;
+ val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0;
+ }
+
+ ep93xx_syscon_swlocked_write(val, psc->reg);
+
+ if (psc->lock)
+ spin_unlock_irqrestore(psc->lock, flags);
+
+ return 0;
+}
+
+static bool is_best(unsigned long rate, unsigned long now,
+ unsigned long best)
+{
+ return abs(rate - now) < abs(rate - best);
+}
+
+static int ep93xx_mux_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ unsigned long rate = req->rate;
+ struct clk *best_parent = NULL;
+ unsigned long __parent_rate;
+ unsigned long best_rate = 0, actual_rate, mclk_rate;
+ unsigned long best_parent_rate;
+ int __div = 0, __pdiv = 0;
+ int i;
+
+ /*
+ * Try the two pll's and the external clock
+ * Because the valid predividers are 2, 2.5 and 3, we multiply
+ * all the clocks by 2 to avoid floating point math.
+ *
+ * This is based on the algorithm in the ep93xx raster guide:
+ * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
+ *
+ */
+ for (i = 0; i < ARRAY_SIZE(mux_parents); i++) {
+ struct clk *parent = clk_get_sys(mux_parents[i], NULL);
+
+ __parent_rate = clk_get_rate(parent);
+ mclk_rate = __parent_rate * 2;
+
+ /* Try each predivider value */
+ for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
+ __div = mclk_rate / (rate * __pdiv);
+ if (__div < 2 || __div > 127)
+ continue;
+
+ actual_rate = mclk_rate / (__pdiv * __div);
+ if (is_best(rate, actual_rate, best_rate)) {
+ best_rate = actual_rate;
+ best_parent_rate = __parent_rate;
+ best_parent = parent;
+ }
+ }
+ }
+
+ if (!best_parent)
+ return -EINVAL;
+
+ req->best_parent_rate = best_parent_rate;
+ req->best_parent_hw = __clk_get_hw(best_parent);
+ req->rate = best_rate;
+
+ return 0;
+}
+
+static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ unsigned long rate = 0;
+ u32 val = __raw_readl(psc->reg);
+ int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03);
+ int __div = val & 0x7f;
+
+ if (__div > 0)
+ rate = (parent_rate * 2) / ((__pdiv + 3) * __div);
+
+ return rate;
+}
+
+static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ int pdiv = 0, div = 0;
+ unsigned long best_rate = 0, actual_rate, mclk_rate;
+ int __div = 0, __pdiv = 0;
+ u32 val;
+
+ mclk_rate = parent_rate * 2;
+
+ for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
+ __div = mclk_rate / (rate * __pdiv);
+ if (__div < 2 || __div > 127)
+ continue;
+
+ actual_rate = mclk_rate / (__pdiv * __div);
+ if (is_best(rate, actual_rate, best_rate)) {
+ pdiv = __pdiv - 3;
+ div = __div;
+ best_rate = actual_rate;
+ }
+ }
+
+ if (!best_rate)
+ return -EINVAL;
+
+ val = __raw_readl(psc->reg);
+
+ /* Clear old dividers */
+ val &= ~0x37f;
+
+ /* Set the new pdiv and div bits for the new clock rate */
+ val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
+ ep93xx_syscon_swlocked_write(val, psc->reg);
+
+ return 0;
+}
+
+static const struct clk_ops clk_ddiv_ops = {
+ .enable = ep93xx_clk_enable,
+ .disable = ep93xx_clk_disable,
+ .is_enabled = ep93xx_clk_is_enabled,
+ .get_parent = ep93xx_mux_get_parent,
+ .set_parent = ep93xx_mux_set_parent_lock,
+ .determine_rate = ep93xx_mux_determine_rate,
+ .recalc_rate = ep93xx_ddiv_recalc_rate,
+ .set_rate = ep93xx_ddiv_set_rate,
+};
+
+static struct clk_hw *clk_hw_register_ddiv(const char *name,
+ void __iomem *reg,
+ u8 bit_idx)
+{
+ struct clk_init_data init;
+ struct clk_psc *psc;
+ struct clk *clk;
+
+ psc = kzalloc(sizeof(*psc), GFP_KERNEL);
+ if (!psc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_ddiv_ops;
+ init.flags = 0;
+ init.parent_names = mux_parents;
+ init.num_parents = ARRAY_SIZE(mux_parents);
+
+ psc->reg = reg;
+ psc->bit_idx = bit_idx;
+ psc->lock = &clk_lock;
+ psc->hw.init = &init;
+
+ clk = clk_register(NULL, &psc->hw);
+ if (IS_ERR(clk)) {
+ kfree(psc);
+ return ERR_CAST(clk);
+ }
+ return &psc->hw;
+}
+
+static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ u32 val = __raw_readl(psc->reg);
+ u8 index = (val & psc->mask) >> psc->shift;
+
+ if (index > psc->num_div)
+ return 0;
+
+ return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]);
+}
+
+static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ unsigned long best = 0, now, maxdiv;
+ int i;
+
+ maxdiv = psc->div[psc->num_div - 1];
+
+ for (i = 0; i < psc->num_div; i++) {
+ if ((rate * psc->div[i]) == *parent_rate)
+ return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
+
+ now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
+
+ if (is_best(rate, now, best))
+ best = now;
+ }
+
+ if (!best)
+ best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv);
+
+ return best;
+}
+
+static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ u32 val = __raw_readl(psc->reg) & ~psc->mask;
+ int i;
+
+ for (i = 0; i < psc->num_div; i++)
+ if (rate == parent_rate / psc->div[i]) {
+ val |= i << psc->shift;
+ break;
+ }
+
+ if (i == psc->num_div)
+ return -EINVAL;
+
+ ep93xx_syscon_swlocked_write(val, psc->reg);
+
+ return 0;
+}
+
+static const struct clk_ops ep93xx_div_ops = {
+ .enable = ep93xx_clk_enable,
+ .disable = ep93xx_clk_disable,
+ .is_enabled = ep93xx_clk_is_enabled,
+ .recalc_rate = ep93xx_div_recalc_rate,
+ .round_rate = ep93xx_div_round_rate,
+ .set_rate = ep93xx_div_set_rate,
+};
+
+static struct clk_hw *clk_hw_register_div(const char *name,
+ const char *parent_name,
+ void __iomem *reg,
+ u8 enable_bit,
+ u8 shift,
+ u8 width,
+ char *clk_divisors,
+ u8 num_div)
+{
+ struct clk_init_data init;
+ struct clk_psc *psc;
+ struct clk *clk;
+
+ psc = kzalloc(sizeof(*psc), GFP_KERNEL);
+ if (!psc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &ep93xx_div_ops;
+ init.flags = 0;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = 1;
+
+ psc->reg = reg;
+ psc->bit_idx = enable_bit;
+ psc->mask = GENMASK(shift + width - 1, shift);
+ psc->shift = shift;
+ psc->div = clk_divisors;
+ psc->num_div = num_div;
+ psc->lock = &clk_lock;
+ psc->hw.init = &init;
+
+ clk = clk_register(NULL, &psc->hw);
+ if (IS_ERR(clk)) {
+ kfree(psc);
+ return ERR_CAST(clk);
+ }
+ return &psc->hw;
+}
+
+struct ep93xx_gate {
+ unsigned int bit;
+ const char *dev_id;
+ const char *con_id;
+};
+
+static struct ep93xx_gate ep93xx_uarts[] = {
+ {EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL},
+ {EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL},
+ {EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL},
+};
+
+static void __init ep93xx_uart_clock_init(void)
+{
+ unsigned int i;
+ struct clk_hw *hw;
+ u32 value;
+ unsigned int clk_uart_div;
+
+ value = __raw_readl(EP93XX_SYSCON_PWRCNT);
+ if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
+ clk_uart_div = 1;
+ else
+ clk_uart_div = 2;
+
+ hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div);
+
+ /* parenting uart gate clocks to uart clock */
+ for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) {
+ hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id,
+ "uart",
+ EP93XX_SYSCON_DEVCFG,
+ ep93xx_uarts[i].bit);
+
+ clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id);
+ }
+}
+
+static struct ep93xx_gate ep93xx_dmas[] = {
+ {EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"},
+ {EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"},
+};
+
+static void __init ep93xx_dma_clock_init(void)
+{
+ unsigned int i;
+ struct clk_hw *hw;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) {
+ hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id,
+ "hclk", 0,
+ EP93XX_SYSCON_PWRCNT,
+ ep93xx_dmas[i].bit,
+ 0,
+ &clk_lock);
+
+ ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL);
+ if (ret)
+ pr_err("%s: failed to register lookup %s\n",
+ __func__, ep93xx_dmas[i].con_id);
+ }
+}
+
+static int __init ep93xx_clock_init(void)
+{
+ u32 value;
+ struct clk_hw *hw;
+ unsigned long clk_pll1_rate;
+ unsigned long clk_f_rate;
+ unsigned long clk_h_rate;
+ unsigned long clk_p_rate;
+ unsigned long clk_pll2_rate;
+ unsigned int clk_f_div;
+ unsigned int clk_h_div;
+ unsigned int clk_p_div;
+ unsigned int clk_usb_div;
+ unsigned long clk_spi_div;
+
+ hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE);
+ clk_hw_register_clkdev(hw, NULL, "xtali");
+
+ /* Determine the bootloader configured pll1 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET1);
+ if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
+ clk_pll1_rate = EP93XX_EXT_CLK_RATE;
+ else
+ clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
+
+ hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate);
+ clk_hw_register_clkdev(hw, NULL, "pll1");
+
+ /* Initialize the pll1 derived clocks */
+ clk_f_div = fclk_divisors[(value >> 25) & 0x7];
+ clk_h_div = hclk_divisors[(value >> 20) & 0x7];
+ clk_p_div = pclk_divisors[(value >> 18) & 0x3];
+
+ hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div);
+ clk_f_rate = clk_get_rate(hw->clk);
+ hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div);
+ clk_h_rate = clk_get_rate(hw->clk);
+ hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div);
+ clk_p_rate = clk_get_rate(hw->clk);
+
+ clk_hw_register_clkdev(hw, "apb_pclk", NULL);
+
+ ep93xx_dma_clock_init();
+
+ /* Determine the bootloader configured pll2 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET2);
+ if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
+ clk_pll2_rate = EP93XX_EXT_CLK_RATE;
+ else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
+ clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
+ else
+ clk_pll2_rate = 0;
+
+ hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate);
+ clk_hw_register_clkdev(hw, NULL, "pll2");
+
+ /* Initialize the pll2 derived clocks */
+ /*
+ * These four bits set the divide ratio between the PLL2
+ * output and the USB clock.
+ * 0000 - Divide by 1
+ * 0001 - Divide by 2
+ * 0010 - Divide by 3
+ * 0011 - Divide by 4
+ * 0100 - Divide by 5
+ * 0101 - Divide by 6
+ * 0110 - Divide by 7
+ * 0111 - Divide by 8
+ * 1000 - Divide by 9
+ * 1001 - Divide by 10
+ * 1010 - Divide by 11
+ * 1011 - Divide by 12
+ * 1100 - Divide by 13
+ * 1101 - Divide by 14
+ * 1110 - Divide by 15
+ * 1111 - Divide by 1
+ * On power-on-reset these bits are reset to 0000b.
+ */
+ clk_usb_div = (((value >> 28) & 0xf) + 1);
+ hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div);
+ hw = clk_hw_register_gate(NULL, "ohci-platform",
+ "usb_clk", 0,
+ EP93XX_SYSCON_PWRCNT,
+ EP93XX_SYSCON_PWRCNT_USH_EN,
+ 0,
+ &clk_lock);
+ clk_hw_register_clkdev(hw, NULL, "ohci-platform");
+
+ /*
+ * EP93xx SSP clock rate was doubled in version E2. For more information
+ * see:
+ * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+ */
+ clk_spi_div = 1;
+ if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
+ clk_spi_div = 2;
+ hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div);
+ clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0");
+
+ /* pwm clock */
+ hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1);
+ clk_hw_register_clkdev(hw, "pwm_clk", NULL);
+
+ pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
+ clk_pll1_rate / 1000000, clk_pll2_rate / 1000000);
+ pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
+ clk_f_rate / 1000000, clk_h_rate / 1000000,
+ clk_p_rate / 1000000);
+
+ ep93xx_uart_clock_init();
+
+ /* touchscreen/adc clock */
+ hw = clk_hw_register_div("ep93xx-adc",
+ "xtali",
+ EP93XX_SYSCON_KEYTCHCLKDIV,
+ EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
+ EP93XX_SYSCON_KEYTCHCLKDIV_ADIV,
+ 1,
+ adc_divisors,
+ ARRAY_SIZE(adc_divisors));
+
+ clk_hw_register_clkdev(hw, NULL, "ep93xx-adc");
+
+ /* keypad clock */
+ hw = clk_hw_register_div("ep93xx-keypad",
+ "xtali",
+ EP93XX_SYSCON_KEYTCHCLKDIV,
+ EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+ EP93XX_SYSCON_KEYTCHCLKDIV_KDIV,
+ 1,
+ adc_divisors,
+ ARRAY_SIZE(adc_divisors));
+
+ clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad");
+
+ /* On reset PDIV and VDIV is set to zero, while PDIV zero
+ * means clock disable, VDIV shouldn't be zero.
+ * So i set both dividers to minimum.
+ */
+ /* ENA - Enable CLK divider. */
+ /* PDIV - 00 - Disable clock */
+ /* VDIV - at least 2 */
+ /* Check and enable video clk registers */
+ value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV);
+ value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
+ ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV);
+
+ /* check and enable i2s clk registers */
+ value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
+ value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
+ ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV);
+
+ /* video clk */
+ hw = clk_hw_register_ddiv("ep93xx-fb",
+ EP93XX_SYSCON_VIDCLKDIV,
+ EP93XX_SYSCON_CLKDIV_ENABLE);
+
+ clk_hw_register_clkdev(hw, NULL, "ep93xx-fb");
+
+ /* i2s clk */
+ hw = clk_hw_register_ddiv("mclk",
+ EP93XX_SYSCON_I2SCLKDIV,
+ EP93XX_SYSCON_CLKDIV_ENABLE);
+
+ clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s");
+
+ /* i2s sclk */
+#define EP93XX_I2SCLKDIV_SDIV_SHIFT 16
+#define EP93XX_I2SCLKDIV_SDIV_WIDTH 1
+ hw = clk_hw_register_div("sclk",
+ "mclk",
+ EP93XX_SYSCON_I2SCLKDIV,
+ EP93XX_SYSCON_I2SCLKDIV_SENA,
+ EP93XX_I2SCLKDIV_SDIV_SHIFT,
+ EP93XX_I2SCLKDIV_SDIV_WIDTH,
+ sclk_divisors,
+ ARRAY_SIZE(sclk_divisors));
+
+ clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s");
+
+ /* i2s lrclk */
+#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT 17
+#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH 3
+ hw = clk_hw_register_div("lrclk",
+ "sclk",
+ EP93XX_SYSCON_I2SCLKDIV,
+ EP93XX_SYSCON_I2SCLKDIV_SENA,
+ EP93XX_I2SCLKDIV_LRDIV32_SHIFT,
+ EP93XX_I2SCLKDIV_LRDIV32_WIDTH,
+ lrclk_divisors,
+ ARRAY_SIZE(lrclk_divisors));
+
+ clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s");
+
+ return 0;
+}
+postcore_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
new file mode 100644
index 000000000..95e731676
--- /dev/null
+++ b/arch/arm/mach-ep93xx/core.c
@@ -0,0 +1,1008 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-ep93xx/core.c
+ * Core routines for Cirrus EP93xx chips.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * Thanks go to Michael Burian and Ray Lehtiniemi for their key
+ * role in the ep93xx linux community.
+ */
+
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/sys_soc.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/uaccess.h>
+#include <linux/termios.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/gpio/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/export.h>
+#include <linux/irqchip/arm-vic.h>
+#include <linux/reboot.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/random.h>
+
+#include "hardware.h"
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/keypad-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
+#include <linux/soc/cirrus/ep93xx.h>
+
+#include "gpio-ep93xx.h"
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "soc.h"
+#include "irqs.h"
+
+/*************************************************************************
+ * Static I/O mappings that are needed for all EP93xx platforms
+ *************************************************************************/
+static struct map_desc ep93xx_io_desc[] __initdata = {
+ {
+ .virtual = EP93XX_AHB_VIRT_BASE,
+ .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
+ .length = EP93XX_AHB_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = EP93XX_APB_VIRT_BASE,
+ .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
+ .length = EP93XX_APB_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init ep93xx_map_io(void)
+{
+ iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
+}
+
+/*************************************************************************
+ * EP93xx IRQ handling
+ *************************************************************************/
+void __init ep93xx_init_irq(void)
+{
+ vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+ vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+}
+
+
+/*************************************************************************
+ * EP93xx System Controller Software Locked register handling
+ *************************************************************************/
+
+/*
+ * syscon_swlock prevents anything else from writing to the syscon
+ * block while a software locked register is being written.
+ */
+static DEFINE_SPINLOCK(syscon_swlock);
+
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&syscon_swlock, flags);
+
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(val, reg);
+
+ spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
+{
+ unsigned long flags;
+ unsigned int val;
+
+ spin_lock_irqsave(&syscon_swlock, flags);
+
+ val = __raw_readl(EP93XX_SYSCON_DEVCFG);
+ val &= ~clear_bits;
+ val |= set_bits;
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(val, EP93XX_SYSCON_DEVCFG);
+
+ spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+
+/**
+ * ep93xx_chip_revision() - returns the EP93xx chip revision
+ *
+ * See "platform.h" for more information.
+ */
+unsigned int ep93xx_chip_revision(void)
+{
+ unsigned int v;
+
+ v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+ v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
+ v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
+ return v;
+}
+EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
+
+/*************************************************************************
+ * EP93xx GPIO
+ *************************************************************************/
+static struct resource ep93xx_gpio_resource[] = {
+ DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc),
+ DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB),
+ DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX),
+ DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX),
+ DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX),
+ DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX),
+ DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX),
+ DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX),
+ DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX),
+ DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX),
+};
+
+static struct platform_device ep93xx_gpio_device = {
+ .name = "gpio-ep93xx",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_gpio_resource),
+ .resource = ep93xx_gpio_resource,
+};
+
+/*************************************************************************
+ * EP93xx peripheral handling
+ *************************************************************************/
+#define EP93XX_UART_MCR_OFFSET (0x0100)
+
+static void ep93xx_uart_set_mctrl(struct amba_device *dev,
+ void __iomem *base, unsigned int mctrl)
+{
+ unsigned int mcr;
+
+ mcr = 0;
+ if (mctrl & TIOCM_RTS)
+ mcr |= 2;
+ if (mctrl & TIOCM_DTR)
+ mcr |= 1;
+
+ __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
+}
+
+static struct amba_pl010_data ep93xx_uart_data = {
+ .set_mctrl = ep93xx_uart_set_mctrl,
+};
+
+static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
+ { IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
+
+static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
+ { IRQ_EP93XX_UART2 }, NULL);
+
+static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
+ { IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
+
+static struct resource ep93xx_rtc_resource[] = {
+ DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c),
+};
+
+static struct platform_device ep93xx_rtc_device = {
+ .name = "ep93xx-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_rtc_resource),
+ .resource = ep93xx_rtc_resource,
+};
+
+/*************************************************************************
+ * EP93xx OHCI USB Host
+ *************************************************************************/
+
+static struct clk *ep93xx_ohci_host_clock;
+
+static int ep93xx_ohci_power_on(struct platform_device *pdev)
+{
+ if (!ep93xx_ohci_host_clock) {
+ ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ep93xx_ohci_host_clock))
+ return PTR_ERR(ep93xx_ohci_host_clock);
+ }
+
+ return clk_prepare_enable(ep93xx_ohci_host_clock);
+}
+
+static void ep93xx_ohci_power_off(struct platform_device *pdev)
+{
+ clk_disable(ep93xx_ohci_host_clock);
+}
+
+static struct usb_ohci_pdata ep93xx_ohci_pdata = {
+ .power_on = ep93xx_ohci_power_on,
+ .power_off = ep93xx_ohci_power_off,
+ .power_suspend = ep93xx_ohci_power_off,
+};
+
+static struct resource ep93xx_ohci_resources[] = {
+ DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
+ DEFINE_RES_IRQ(IRQ_EP93XX_USB),
+};
+
+static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ep93xx_ohci_device = {
+ .name = "ohci-platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_ohci_resources),
+ .resource = ep93xx_ohci_resources,
+ .dev = {
+ .dma_mask = &ep93xx_ohci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ep93xx_ohci_pdata,
+ },
+};
+
+/*************************************************************************
+ * EP93xx physmap'ed flash
+ *************************************************************************/
+static struct physmap_flash_data ep93xx_flash_data;
+
+static struct resource ep93xx_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ep93xx_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ep93xx_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ep93xx_flash_resource,
+};
+
+/**
+ * ep93xx_register_flash() - Register the external flash device.
+ * @width: bank width in octets
+ * @start: resource start address
+ * @size: resource size
+ */
+void __init ep93xx_register_flash(unsigned int width,
+ resource_size_t start, resource_size_t size)
+{
+ ep93xx_flash_data.width = width;
+
+ ep93xx_flash_resource.start = start;
+ ep93xx_flash_resource.end = start + size - 1;
+
+ platform_device_register(&ep93xx_flash);
+}
+
+
+/*************************************************************************
+ * EP93xx ethernet peripheral handling
+ *************************************************************************/
+static struct ep93xx_eth_data ep93xx_eth_data;
+
+static struct resource ep93xx_eth_resource[] = {
+ DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000),
+ DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET),
+};
+
+static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ep93xx_eth_device = {
+ .name = "ep93xx-eth",
+ .id = -1,
+ .dev = {
+ .platform_data = &ep93xx_eth_data,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &ep93xx_eth_dma_mask,
+ },
+ .num_resources = ARRAY_SIZE(ep93xx_eth_resource),
+ .resource = ep93xx_eth_resource,
+};
+
+/**
+ * ep93xx_register_eth - Register the built-in ethernet platform device.
+ * @data: platform specific ethernet configuration (__initdata)
+ * @copy_addr: flag indicating that the MAC address should be copied
+ * from the IndAd registers (as programmed by the bootloader)
+ */
+void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
+{
+ if (copy_addr)
+ memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
+
+ ep93xx_eth_data = *data;
+ platform_device_register(&ep93xx_eth_device);
+}
+
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+
+/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
+static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
+ .dev_id = "i2c-gpio.0",
+ .table = {
+ /* Use local offsets on gpiochip/port "G" */
+ GPIO_LOOKUP_IDX("G", 1, NULL, 0,
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ GPIO_LOOKUP_IDX("G", 0, NULL, 1,
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ },
+};
+
+static struct platform_device ep93xx_i2c_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+/**
+ * ep93xx_register_i2c - Register the i2c platform device.
+ * @devices: platform specific i2c bus device information (__initdata)
+ * @num: the number of devices on the i2c bus
+ */
+void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+{
+ /*
+ * FIXME: this just sets the two pins as non-opendrain, as no
+ * platforms tries to do that anyway. Flag the applicable lines
+ * as open drain in the GPIO_LOOKUP above and the driver or
+ * gpiolib will handle open drain/open drain emulation as need
+ * be. Right now i2c-gpio emulates open drain which is not
+ * optimal.
+ */
+ __raw_writel((0 << 1) | (0 << 0),
+ EP93XX_GPIO_EEDRIVE);
+
+ i2c_register_board_info(0, devices, num);
+ gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table);
+ platform_device_register(&ep93xx_i2c_device);
+}
+
+/*************************************************************************
+ * EP93xx SPI peripheral handling
+ *************************************************************************/
+static struct ep93xx_spi_info ep93xx_spi_master_data;
+
+static struct resource ep93xx_spi_resources[] = {
+ DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18),
+ DEFINE_RES_IRQ(IRQ_EP93XX_SSP),
+};
+
+static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ep93xx_spi_device = {
+ .name = "ep93xx-spi",
+ .id = 0,
+ .dev = {
+ .platform_data = &ep93xx_spi_master_data,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &ep93xx_spi_dma_mask,
+ },
+ .num_resources = ARRAY_SIZE(ep93xx_spi_resources),
+ .resource = ep93xx_spi_resources,
+};
+
+/**
+ * ep93xx_register_spi() - registers spi platform device
+ * @info: ep93xx board specific spi master info (__initdata)
+ * @devices: SPI devices to register (__initdata)
+ * @num: number of SPI devices to register
+ *
+ * This function registers platform device for the EP93xx SPI controller and
+ * also makes sure that SPI pins are muxed so that I2S is not using those pins.
+ */
+void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
+ struct spi_board_info *devices, int num)
+{
+ /*
+ * When SPI is used, we need to make sure that I2S is muxed off from
+ * SPI pins.
+ */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
+
+ ep93xx_spi_master_data = *info;
+ spi_register_board_info(devices, num);
+ platform_device_register(&ep93xx_spi_device);
+}
+
+/*************************************************************************
+ * EP93xx LEDs
+ *************************************************************************/
+static const struct gpio_led ep93xx_led_pins[] __initconst = {
+ {
+ .name = "platform:grled",
+ .gpio = EP93XX_GPIO_LINE_GRLED,
+ }, {
+ .name = "platform:rdled",
+ .gpio = EP93XX_GPIO_LINE_RDLED,
+ },
+};
+
+static const struct gpio_led_platform_data ep93xx_led_data __initconst = {
+ .num_leds = ARRAY_SIZE(ep93xx_led_pins),
+ .leds = ep93xx_led_pins,
+};
+
+/*************************************************************************
+ * EP93xx pwm peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_pwm0_resource[] = {
+ DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10),
+};
+
+static struct platform_device ep93xx_pwm0_device = {
+ .name = "ep93xx-pwm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource),
+ .resource = ep93xx_pwm0_resource,
+};
+
+static struct resource ep93xx_pwm1_resource[] = {
+ DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10),
+};
+
+static struct platform_device ep93xx_pwm1_device = {
+ .name = "ep93xx-pwm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource),
+ .resource = ep93xx_pwm1_resource,
+};
+
+void __init ep93xx_register_pwm(int pwm0, int pwm1)
+{
+ if (pwm0)
+ platform_device_register(&ep93xx_pwm0_device);
+
+ /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
+ if (pwm1)
+ platform_device_register(&ep93xx_pwm1_device);
+}
+
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
+{
+ int err;
+
+ if (pdev->id == 0) {
+ err = 0;
+ } else if (pdev->id == 1) {
+ err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
+ dev_name(&pdev->dev));
+ if (err)
+ return err;
+ err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
+ if (err)
+ goto fail;
+
+ /* PWM 1 output on EGPIO[14] */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
+ } else {
+ err = -ENODEV;
+ }
+
+ return err;
+
+fail:
+ gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+ return err;
+}
+EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
+
+void ep93xx_pwm_release_gpio(struct platform_device *pdev)
+{
+ if (pdev->id == 1) {
+ gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
+ gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+
+ /* EGPIO[14] used for GPIO */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
+ }
+}
+EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+
+
+/*************************************************************************
+ * EP93xx video peripheral handling
+ *************************************************************************/
+static struct ep93xxfb_mach_info ep93xxfb_data;
+
+static struct resource ep93xx_fb_resource[] = {
+ DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800),
+};
+
+static struct platform_device ep93xx_fb_device = {
+ .name = "ep93xx-fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &ep93xxfb_data,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask,
+ },
+ .num_resources = ARRAY_SIZE(ep93xx_fb_resource),
+ .resource = ep93xx_fb_resource,
+};
+
+/* The backlight use a single register in the framebuffer's register space */
+#define EP93XX_RASTER_REG_BRIGHTNESS 0x20
+
+static struct resource ep93xx_bl_resources[] = {
+ DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE +
+ EP93XX_RASTER_REG_BRIGHTNESS, 0x04),
+};
+
+static struct platform_device ep93xx_bl_device = {
+ .name = "ep93xx-bl",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_bl_resources),
+ .resource = ep93xx_bl_resources,
+};
+
+/**
+ * ep93xx_register_fb - Register the framebuffer platform device.
+ * @data: platform specific framebuffer configuration (__initdata)
+ */
+void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
+{
+ ep93xxfb_data = *data;
+ platform_device_register(&ep93xx_fb_device);
+ platform_device_register(&ep93xx_bl_device);
+}
+
+
+/*************************************************************************
+ * EP93xx matrix keypad peripheral handling
+ *************************************************************************/
+static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
+
+static struct resource ep93xx_keypad_resource[] = {
+ DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c),
+ DEFINE_RES_IRQ(IRQ_EP93XX_KEY),
+};
+
+static struct platform_device ep93xx_keypad_device = {
+ .name = "ep93xx-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &ep93xx_keypad_data,
+ },
+ .num_resources = ARRAY_SIZE(ep93xx_keypad_resource),
+ .resource = ep93xx_keypad_resource,
+};
+
+/**
+ * ep93xx_register_keypad - Register the keypad platform device.
+ * @data: platform specific keypad configuration (__initdata)
+ */
+void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
+{
+ ep93xx_keypad_data = *data;
+ platform_device_register(&ep93xx_keypad_device);
+}
+
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
+{
+ int err;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_c;
+ err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_d;
+ }
+
+ /* Enable the keypad controller; GPIO ports C and D used for keypad */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+ EP93XX_SYSCON_DEVCFG_GONK);
+
+ return 0;
+
+fail_gpio_d:
+ gpio_free(EP93XX_GPIO_LINE_C(i));
+fail_gpio_c:
+ for (--i; i >= 0; --i) {
+ gpio_free(EP93XX_GPIO_LINE_C(i));
+ gpio_free(EP93XX_GPIO_LINE_D(i));
+ }
+ return err;
+}
+EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
+
+void ep93xx_keypad_release_gpio(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ gpio_free(EP93XX_GPIO_LINE_C(i));
+ gpio_free(EP93XX_GPIO_LINE_D(i));
+ }
+
+ /* Disable the keypad controller; GPIO ports C and D used for GPIO */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+ EP93XX_SYSCON_DEVCFG_GONK);
+}
+EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
+
+/*************************************************************************
+ * EP93xx I2S audio peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_i2s_resource[] = {
+ DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
+ DEFINE_RES_IRQ(IRQ_EP93XX_SAI),
+};
+
+static struct platform_device ep93xx_i2s_device = {
+ .name = "ep93xx-i2s",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_i2s_resource),
+ .resource = ep93xx_i2s_resource,
+};
+
+static struct platform_device ep93xx_pcm_device = {
+ .name = "ep93xx-pcm-audio",
+ .id = -1,
+};
+
+void __init ep93xx_register_i2s(void)
+{
+ platform_device_register(&ep93xx_i2s_device);
+ platform_device_register(&ep93xx_pcm_device);
+}
+
+#define EP93XX_SYSCON_DEVCFG_I2S_MASK (EP93XX_SYSCON_DEVCFG_I2SONSSP | \
+ EP93XX_SYSCON_DEVCFG_I2SONAC97)
+
+#define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
+ EP93XX_SYSCON_I2SCLKDIV_SPOL)
+
+int ep93xx_i2s_acquire(void)
+{
+ unsigned val;
+
+ ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
+ EP93XX_SYSCON_DEVCFG_I2S_MASK);
+
+ /*
+ * This is potentially racy with the clock api for i2s_mclk, sclk and
+ * lrclk. Since the i2s driver is the only user of those clocks we
+ * rely on it to prevent parallel use of this function and the
+ * clock api for the i2s clocks.
+ */
+ val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
+ val &= ~EP93XX_I2SCLKDIV_MASK;
+ val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
+ ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
+
+ return 0;
+}
+EXPORT_SYMBOL(ep93xx_i2s_acquire);
+
+void ep93xx_i2s_release(void)
+{
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
+}
+EXPORT_SYMBOL(ep93xx_i2s_release);
+
+/*************************************************************************
+ * EP93xx AC97 audio peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_ac97_resources[] = {
+ DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac),
+ DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR),
+};
+
+static struct platform_device ep93xx_ac97_device = {
+ .name = "ep93xx-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_ac97_resources),
+ .resource = ep93xx_ac97_resources,
+};
+
+void __init ep93xx_register_ac97(void)
+{
+ /*
+ * Make sure that the AC97 pins are not used by I2S.
+ */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
+
+ platform_device_register(&ep93xx_ac97_device);
+ platform_device_register(&ep93xx_pcm_device);
+}
+
+/*************************************************************************
+ * EP93xx Watchdog
+ *************************************************************************/
+static struct resource ep93xx_wdt_resources[] = {
+ DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08),
+};
+
+static struct platform_device ep93xx_wdt_device = {
+ .name = "ep93xx-wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_wdt_resources),
+ .resource = ep93xx_wdt_resources,
+};
+
+/*************************************************************************
+ * EP93xx IDE
+ *************************************************************************/
+static struct resource ep93xx_ide_resources[] = {
+ DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38),
+ DEFINE_RES_IRQ(IRQ_EP93XX_EXT3),
+};
+
+static struct platform_device ep93xx_ide_device = {
+ .name = "ep93xx-ide",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(ep93xx_ide_resources),
+ .resource = ep93xx_ide_resources,
+};
+
+void __init ep93xx_register_ide(void)
+{
+ platform_device_register(&ep93xx_ide_device);
+}
+
+int ep93xx_ide_acquire_gpio(struct platform_device *pdev)
+{
+ int err;
+ int i;
+
+ err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev));
+ if (err)
+ return err;
+ err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev));
+ if (err)
+ goto fail_egpio15;
+ for (i = 2; i < 8; i++) {
+ err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_e;
+ }
+ for (i = 4; i < 8; i++) {
+ err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_g;
+ }
+ for (i = 0; i < 8; i++) {
+ err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_h;
+ }
+
+ /* GPIO ports E[7:2], G[7:4] and H used by IDE */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
+ EP93XX_SYSCON_DEVCFG_GONIDE |
+ EP93XX_SYSCON_DEVCFG_HONIDE);
+ return 0;
+
+fail_gpio_h:
+ for (--i; i >= 0; --i)
+ gpio_free(EP93XX_GPIO_LINE_H(i));
+ i = 8;
+fail_gpio_g:
+ for (--i; i >= 4; --i)
+ gpio_free(EP93XX_GPIO_LINE_G(i));
+ i = 8;
+fail_gpio_e:
+ for (--i; i >= 2; --i)
+ gpio_free(EP93XX_GPIO_LINE_E(i));
+ gpio_free(EP93XX_GPIO_LINE_EGPIO15);
+fail_egpio15:
+ gpio_free(EP93XX_GPIO_LINE_EGPIO2);
+ return err;
+}
+EXPORT_SYMBOL(ep93xx_ide_acquire_gpio);
+
+void ep93xx_ide_release_gpio(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 2; i < 8; i++)
+ gpio_free(EP93XX_GPIO_LINE_E(i));
+ for (i = 4; i < 8; i++)
+ gpio_free(EP93XX_GPIO_LINE_G(i));
+ for (i = 0; i < 8; i++)
+ gpio_free(EP93XX_GPIO_LINE_H(i));
+ gpio_free(EP93XX_GPIO_LINE_EGPIO15);
+ gpio_free(EP93XX_GPIO_LINE_EGPIO2);
+
+
+ /* GPIO ports E[7:2], G[7:4] and H used by GPIO */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
+ EP93XX_SYSCON_DEVCFG_GONIDE |
+ EP93XX_SYSCON_DEVCFG_HONIDE);
+}
+EXPORT_SYMBOL(ep93xx_ide_release_gpio);
+
+/*************************************************************************
+ * EP93xx ADC
+ *************************************************************************/
+static struct resource ep93xx_adc_resources[] = {
+ DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28),
+ DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH),
+};
+
+static struct platform_device ep93xx_adc_device = {
+ .name = "ep93xx-adc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_adc_resources),
+ .resource = ep93xx_adc_resources,
+};
+
+void __init ep93xx_register_adc(void)
+{
+ /* Power up ADC, deactivate Touch Screen Controller */
+ ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN,
+ EP93XX_SYSCON_DEVCFG_ADCPD);
+
+ platform_device_register(&ep93xx_adc_device);
+}
+
+/*************************************************************************
+ * EP93xx Security peripheral
+ *************************************************************************/
+
+/*
+ * The Maverick Key is 256 bits of micro fuses blown at the factory during
+ * manufacturing to uniquely identify a part.
+ *
+ * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key
+ */
+#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
+#define EP93XX_SECURITY_SECFLG EP93XX_SECURITY_REG(0x2400)
+#define EP93XX_SECURITY_FUSEFLG EP93XX_SECURITY_REG(0x2410)
+#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
+#define EP93XX_SECURITY_UNIQCHK EP93XX_SECURITY_REG(0x2450)
+#define EP93XX_SECURITY_UNIQVAL EP93XX_SECURITY_REG(0x2460)
+#define EP93XX_SECURITY_SECID1 EP93XX_SECURITY_REG(0x2500)
+#define EP93XX_SECURITY_SECID2 EP93XX_SECURITY_REG(0x2504)
+#define EP93XX_SECURITY_SECCHK1 EP93XX_SECURITY_REG(0x2520)
+#define EP93XX_SECURITY_SECCHK2 EP93XX_SECURITY_REG(0x2524)
+#define EP93XX_SECURITY_UNIQID2 EP93XX_SECURITY_REG(0x2700)
+#define EP93XX_SECURITY_UNIQID3 EP93XX_SECURITY_REG(0x2704)
+#define EP93XX_SECURITY_UNIQID4 EP93XX_SECURITY_REG(0x2708)
+#define EP93XX_SECURITY_UNIQID5 EP93XX_SECURITY_REG(0x270c)
+
+static char ep93xx_soc_id[33];
+
+static const char __init *ep93xx_get_soc_id(void)
+{
+ unsigned int id, id2, id3, id4, id5;
+
+ if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1)
+ return "bad Hamming code";
+
+ id = __raw_readl(EP93XX_SECURITY_UNIQID);
+ id2 = __raw_readl(EP93XX_SECURITY_UNIQID2);
+ id3 = __raw_readl(EP93XX_SECURITY_UNIQID3);
+ id4 = __raw_readl(EP93XX_SECURITY_UNIQID4);
+ id5 = __raw_readl(EP93XX_SECURITY_UNIQID5);
+
+ if (id != id2)
+ return "invalid";
+
+ /* Toss the unique ID into the entropy pool */
+ add_device_randomness(&id2, 4);
+ add_device_randomness(&id3, 4);
+ add_device_randomness(&id4, 4);
+ add_device_randomness(&id5, 4);
+
+ snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id),
+ "%08x%08x%08x%08x", id2, id3, id4, id5);
+
+ return ep93xx_soc_id;
+}
+
+static const char __init *ep93xx_get_soc_rev(void)
+{
+ int rev = ep93xx_chip_revision();
+
+ switch (rev) {
+ case EP93XX_CHIP_REV_D0:
+ return "D0";
+ case EP93XX_CHIP_REV_D1:
+ return "D1";
+ case EP93XX_CHIP_REV_E0:
+ return "E0";
+ case EP93XX_CHIP_REV_E1:
+ return "E1";
+ case EP93XX_CHIP_REV_E2:
+ return "E2";
+ default:
+ return "unknown";
+ }
+}
+
+static const char __init *ep93xx_get_machine_name(void)
+{
+ return kasprintf(GFP_KERNEL,"%s", machine_desc->name);
+}
+
+static struct device __init *ep93xx_init_soc(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return NULL;
+
+ soc_dev_attr->machine = ep93xx_get_machine_name();
+ soc_dev_attr->family = "Cirrus Logic EP93xx";
+ soc_dev_attr->revision = ep93xx_get_soc_rev();
+ soc_dev_attr->soc_id = ep93xx_get_soc_id();
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->machine);
+ kfree(soc_dev_attr);
+ return NULL;
+ }
+
+ return soc_device_to_device(soc_dev);
+}
+
+struct device __init *ep93xx_init_devices(void)
+{
+ struct device *parent;
+
+ /* Disallow access to MaverickCrunch initially */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
+
+ /* Default all ports to GPIO */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+ EP93XX_SYSCON_DEVCFG_GONK |
+ EP93XX_SYSCON_DEVCFG_EONIDE |
+ EP93XX_SYSCON_DEVCFG_GONIDE |
+ EP93XX_SYSCON_DEVCFG_HONIDE);
+
+ parent = ep93xx_init_soc();
+
+ /* Get the GPIO working early, other devices need it */
+ platform_device_register(&ep93xx_gpio_device);
+
+ amba_device_register(&uart1_device, &iomem_resource);
+ amba_device_register(&uart2_device, &iomem_resource);
+ amba_device_register(&uart3_device, &iomem_resource);
+
+ platform_device_register(&ep93xx_rtc_device);
+ platform_device_register(&ep93xx_ohci_device);
+ platform_device_register(&ep93xx_wdt_device);
+
+ gpio_led_register_device(-1, &ep93xx_led_data);
+
+ return parent;
+}
+
+void ep93xx_restart(enum reboot_mode mode, const char *cmd)
+{
+ /*
+ * Set then clear the SWRST bit to initiate a software reset
+ */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c
new file mode 100644
index 000000000..74515acab
--- /dev/null
+++ b/arch/arm/mach-ep93xx/dma.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-ep93xx/dma.c
+ *
+ * Platform support code for the EP93xx dmaengine driver.
+ *
+ * Copyright (C) 2011 Mika Westerberg
+ *
+ * This work is based on the original dma-m2p implementation with
+ * following copyrights:
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2006 Applied Data Systems
+ * Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com>
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/platform_data/dma-ep93xx.h>
+#include "hardware.h"
+
+#include "soc.h"
+
+#define DMA_CHANNEL(_name, _base, _irq) \
+ { .name = (_name), .base = (_base), .irq = (_irq) }
+
+/*
+ * DMA M2P channels.
+ *
+ * On the EP93xx chip the following peripherals my be allocated to the 10
+ * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
+ *
+ * I2S contains 3 Tx and 3 Rx DMA Channels
+ * AAC contains 3 Tx and 3 Rx DMA Channels
+ * UART1 contains 1 Tx and 1 Rx DMA Channels
+ * UART2 contains 1 Tx and 1 Rx DMA Channels
+ * UART3 contains 1 Tx and 1 Rx DMA Channels
+ * IrDA contains 1 Tx and 1 Rx DMA Channels
+ *
+ * Registers are mapped statically in ep93xx_map_io().
+ */
+static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = {
+ DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0),
+ DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1),
+ DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2),
+ DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3),
+ DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4),
+ DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5),
+ DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6),
+ DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7),
+ DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8),
+ DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9),
+};
+
+static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = {
+ .channels = ep93xx_dma_m2p_channels,
+ .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels),
+};
+
+static u64 ep93xx_dma_m2p_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ep93xx_dma_m2p_device = {
+ .name = "ep93xx-dma-m2p",
+ .id = -1,
+ .dev = {
+ .platform_data = &ep93xx_dma_m2p_data,
+ .dma_mask = &ep93xx_dma_m2p_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+/*
+ * DMA M2M channels.
+ *
+ * There are 2 M2M channels which support memcpy/memset and in addition simple
+ * hardware requests from/to SSP and IDE. We do not implement an external
+ * hardware requests.
+ *
+ * Registers are mapped statically in ep93xx_map_io().
+ */
+static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = {
+ DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0),
+ DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1),
+};
+
+static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = {
+ .channels = ep93xx_dma_m2m_channels,
+ .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels),
+};
+
+static u64 ep93xx_dma_m2m_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ep93xx_dma_m2m_device = {
+ .name = "ep93xx-dma-m2m",
+ .id = -1,
+ .dev = {
+ .platform_data = &ep93xx_dma_m2m_data,
+ .dma_mask = &ep93xx_dma_m2m_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static int __init ep93xx_dma_init(void)
+{
+ platform_device_register(&ep93xx_dma_m2p_device);
+ platform_device_register(&ep93xx_dma_m2m_device);
+ return 0;
+}
+arch_initcall(ep93xx_dma_init);
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
new file mode 100644
index 000000000..4b90899a6
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-ep93xx/edb93xx.c
+ * Cirrus Logic EDB93xx Development Board support.
+ *
+ * EDB93XX, EDB9301, EDB9307A
+ * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EDB9302
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * EDB9302A, EDB9315, EDB9315A
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * EDB9307
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * EDB9312
+ * Copyright (C) 2006 Infosys Technologies Limited
+ * Toufeeq Hussain <toufeeq_hussain@infosys.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio/machine.h>
+
+#include <sound/cs4271.h>
+
+#include "hardware.h"
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
+#include "gpio-ep93xx.h"
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "soc.h"
+
+static void __init edb93xx_register_flash(void)
+{
+ if (machine_is_edb9307() || machine_is_edb9312() ||
+ machine_is_edb9315()) {
+ ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+ } else {
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+ }
+}
+
+static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
+ .phy_id = 1,
+};
+
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ },
+};
+
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+};
+
+static void __init edb93xx_register_i2c(void)
+{
+ if (machine_is_edb9302a() || machine_is_edb9307a() ||
+ machine_is_edb9315a()) {
+ ep93xx_register_i2c(edb93xxa_i2c_board_info,
+ ARRAY_SIZE(edb93xxa_i2c_board_info));
+ } else if (machine_is_edb9302() || machine_is_edb9307()
+ || machine_is_edb9312() || machine_is_edb9315()) {
+ ep93xx_register_i2c(edb93xx_i2c_board_info,
+ ARRAY_SIZE(edb93xx_i2c_board_info));
+ }
+}
+
+
+/*************************************************************************
+ * EDB93xx SPI peripheral handling
+ *************************************************************************/
+static struct cs4271_platform_data edb93xx_cs4271_data = {
+ .gpio_nreset = -EINVAL, /* filled in later */
+};
+
+static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
+ {
+ .modalias = "cs4271",
+ .platform_data = &edb93xx_cs4271_data,
+ .max_speed_hz = 6000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = {
+ .dev_id = "spi0",
+ .table = {
+ GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
+ /* Intentionally left blank */
+};
+
+static void __init edb93xx_register_spi(void)
+{
+ if (machine_is_edb9301() || machine_is_edb9302())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+ else if (machine_is_edb9302a() || machine_is_edb9307a())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
+ else if (machine_is_edb9315a())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+
+ gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table);
+ ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
+ ARRAY_SIZE(edb93xx_spi_board_info));
+}
+
+
+/*************************************************************************
+ * EDB93xx I2S
+ *************************************************************************/
+static struct platform_device edb93xx_audio_device = {
+ .name = "edb93xx-audio",
+ .id = -1,
+};
+
+static int __init edb93xx_has_audio(void)
+{
+ return (machine_is_edb9301() || machine_is_edb9302() ||
+ machine_is_edb9302a() || machine_is_edb9307a() ||
+ machine_is_edb9315a());
+}
+
+static void __init edb93xx_register_i2s(void)
+{
+ if (edb93xx_has_audio()) {
+ ep93xx_register_i2s();
+ platform_device_register(&edb93xx_audio_device);
+ }
+}
+
+
+/*************************************************************************
+ * EDB93xx pwm
+ *************************************************************************/
+static void __init edb93xx_register_pwm(void)
+{
+ if (machine_is_edb9301() ||
+ machine_is_edb9302() || machine_is_edb9302a()) {
+ /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
+ ep93xx_register_pwm(0, 1);
+ } else if (machine_is_edb9307() || machine_is_edb9307a()) {
+ /* EP9307 only has pwm.0 (PWMOUT) */
+ ep93xx_register_pwm(1, 0);
+ } else {
+ /* EP9312 and EP9315 have both */
+ ep93xx_register_pwm(1, 1);
+ }
+}
+
+
+/*************************************************************************
+ * EDB93xx framebuffer
+ *************************************************************************/
+static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
+ .flags = 0,
+};
+
+static int __init edb93xx_has_fb(void)
+{
+ /* These platforms have an ep93xx with video capability */
+ return machine_is_edb9307() || machine_is_edb9307a() ||
+ machine_is_edb9312() || machine_is_edb9315() ||
+ machine_is_edb9315a();
+}
+
+static void __init edb93xx_register_fb(void)
+{
+ if (!edb93xx_has_fb())
+ return;
+
+ if (machine_is_edb9307a() || machine_is_edb9315a())
+ edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
+ else
+ edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
+
+ ep93xx_register_fb(&edb93xxfb_info);
+}
+
+
+/*************************************************************************
+ * EDB93xx IDE
+ *************************************************************************/
+static int __init edb93xx_has_ide(void)
+{
+ /*
+ * Although EDB9312 and EDB9315 do have IDE capability, they have
+ * INTRQ line wired as pull-up, which makes using IDE interface
+ * problematic.
+ */
+ return machine_is_edb9312() || machine_is_edb9315() ||
+ machine_is_edb9315a();
+}
+
+static void __init edb93xx_register_ide(void)
+{
+ if (!edb93xx_has_ide())
+ return;
+
+ ep93xx_register_ide();
+}
+
+
+static void __init edb93xx_init_machine(void)
+{
+ ep93xx_init_devices();
+ edb93xx_register_flash();
+ ep93xx_register_eth(&edb93xx_eth_data, 1);
+ edb93xx_register_i2c();
+ edb93xx_register_spi();
+ edb93xx_register_i2s();
+ edb93xx_register_pwm();
+ edb93xx_register_fb();
+ edb93xx_register_ide();
+ ep93xx_register_adc();
+}
+
+
+#ifdef CONFIG_MACH_EDB9301
+MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+ /* Maintainer: George Kashperko <george@chas.com.ua> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302A
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307
+MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
+ /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307A
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9312
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+ /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315
+MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315A
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h
new file mode 100644
index 000000000..8fa3646de
--- /dev/null
+++ b/arch/arm/mach-ep93xx/ep93xx-regs.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_EP93XX_REGS_H
+#define __ASM_ARCH_EP93XX_REGS_H
+
+/*
+ * EP93xx linux memory map:
+ *
+ * virt phys size
+ * fe800000 5M per-platform mappings
+ * fed00000 80800000 2M APB
+ * fef00000 80000000 1M AHB
+ */
+
+#define EP93XX_AHB_PHYS_BASE 0x80000000
+#define EP93XX_AHB_VIRT_BASE 0xfef00000
+#define EP93XX_AHB_SIZE 0x00100000
+
+#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x))
+#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x))
+
+#define EP93XX_APB_PHYS_BASE 0x80800000
+#define EP93XX_APB_VIRT_BASE 0xfed00000
+#define EP93XX_APB_SIZE 0x00200000
+
+#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x))
+#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
+
+/* APB UARTs */
+#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000)
+#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
+
+#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000)
+#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000)
+
+#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
+#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
+
+#endif
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
new file mode 100644
index 000000000..0b7043e3e
--- /dev/null
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-ep93xx/gesbc9312.c
+ * Glomation GESBC-9312-sx support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+
+#include "hardware.h"
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "soc.h"
+
+static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
+ .phy_id = 1,
+};
+
+static void __init gesbc9312_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
+ ep93xx_register_eth(&gesbc9312_eth_data, 0);
+}
+
+MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = gesbc9312_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h
new file mode 100644
index 000000000..7b46eb7e5
--- /dev/null
+++ b/arch/arm/mach-ep93xx/gpio-ep93xx.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Include file for the EP93XX GPIO controller machine specifics */
+
+#ifndef __GPIO_EP93XX_H
+#define __GPIO_EP93XX_H
+
+#include "ep93xx-regs.h"
+
+#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000)
+#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
+#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
+#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
+#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
+
+/* GPIO port A. */
+#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
+#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
+#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1)
+#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2)
+#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3)
+#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4)
+#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5)
+#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6)
+#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7)
+
+/* GPIO port B. */
+#define EP93XX_GPIO_LINE_B(x) ((x) + 8)
+#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0)
+#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1)
+#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2)
+#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3)
+#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4)
+#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5)
+#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6)
+#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
+
+/* GPIO port C. */
+#define EP93XX_GPIO_LINE_C(x) ((x) + 40)
+#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
+#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
+#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
+#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3)
+#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4)
+#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5)
+#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6)
+#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7)
+
+/* GPIO port D. */
+#define EP93XX_GPIO_LINE_D(x) ((x) + 24)
+#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0)
+#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1)
+#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2)
+#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3)
+#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4)
+#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5)
+#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6)
+#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7)
+
+/* GPIO port E. */
+#define EP93XX_GPIO_LINE_E(x) ((x) + 32)
+#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0)
+#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1)
+#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2)
+#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3)
+#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4)
+#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5)
+#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6)
+#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
+
+/* GPIO port F. */
+#define EP93XX_GPIO_LINE_F(x) ((x) + 16)
+#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
+#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
+#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
+#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3)
+#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4)
+#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5)
+#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6)
+#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7)
+
+/* GPIO port G. */
+#define EP93XX_GPIO_LINE_G(x) ((x) + 48)
+#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0)
+#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1)
+#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2)
+#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3)
+#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4)
+#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5)
+#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6)
+#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7)
+
+/* GPIO port H. */
+#define EP93XX_GPIO_LINE_H(x) ((x) + 56)
+#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0)
+#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1)
+#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2)
+#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3)
+#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4)
+#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5)
+#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
+#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for gpio line identifiers */
+#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for irq capable line identifiers */
+#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
+
+#endif /* __GPIO_EP93XX_H */
diff --git a/arch/arm/mach-ep93xx/hardware.h b/arch/arm/mach-ep93xx/hardware.h
new file mode 100644
index 000000000..e7d850e04
--- /dev/null
+++ b/arch/arm/mach-ep93xx/hardware.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-ep93xx/include/mach/hardware.h
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "platform.h"
+
+/*
+ * The EP93xx has two external crystal oscillators. To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks. The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE 14745600
+#define EP93XX_EXT_RTC_RATE 32768
+
+#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4)
+#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16)
+
+#endif
diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h
new file mode 100644
index 000000000..353201b90
--- /dev/null
+++ b/arch/arm/mach-ep93xx/irqs.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_EP93XX_VIC0 1
+
+#define IRQ_EP93XX_COMMRX (IRQ_EP93XX_VIC0 + 2)
+#define IRQ_EP93XX_COMMTX (IRQ_EP93XX_VIC0 + 3)
+#define IRQ_EP93XX_TIMER1 (IRQ_EP93XX_VIC0 + 4)
+#define IRQ_EP93XX_TIMER2 (IRQ_EP93XX_VIC0 + 5)
+#define IRQ_EP93XX_AACINTR (IRQ_EP93XX_VIC0 + 6)
+#define IRQ_EP93XX_DMAM2P0 (IRQ_EP93XX_VIC0 + 7)
+#define IRQ_EP93XX_DMAM2P1 (IRQ_EP93XX_VIC0 + 8)
+#define IRQ_EP93XX_DMAM2P2 (IRQ_EP93XX_VIC0 + 9)
+#define IRQ_EP93XX_DMAM2P3 (IRQ_EP93XX_VIC0 + 10)
+#define IRQ_EP93XX_DMAM2P4 (IRQ_EP93XX_VIC0 + 11)
+#define IRQ_EP93XX_DMAM2P5 (IRQ_EP93XX_VIC0 + 12)
+#define IRQ_EP93XX_DMAM2P6 (IRQ_EP93XX_VIC0 + 13)
+#define IRQ_EP93XX_DMAM2P7 (IRQ_EP93XX_VIC0 + 14)
+#define IRQ_EP93XX_DMAM2P8 (IRQ_EP93XX_VIC0 + 15)
+#define IRQ_EP93XX_DMAM2P9 (IRQ_EP93XX_VIC0 + 16)
+#define IRQ_EP93XX_DMAM2M0 (IRQ_EP93XX_VIC0 + 17)
+#define IRQ_EP93XX_DMAM2M1 (IRQ_EP93XX_VIC0 + 18)
+#define IRQ_EP93XX_GPIO0MUX (IRQ_EP93XX_VIC0 + 19)
+#define IRQ_EP93XX_GPIO1MUX (IRQ_EP93XX_VIC0 + 20)
+#define IRQ_EP93XX_GPIO2MUX (IRQ_EP93XX_VIC0 + 21)
+#define IRQ_EP93XX_GPIO3MUX (IRQ_EP93XX_VIC0 + 22)
+#define IRQ_EP93XX_UART1RX (IRQ_EP93XX_VIC0 + 23)
+#define IRQ_EP93XX_UART1TX (IRQ_EP93XX_VIC0 + 24)
+#define IRQ_EP93XX_UART2RX (IRQ_EP93XX_VIC0 + 25)
+#define IRQ_EP93XX_UART2TX (IRQ_EP93XX_VIC0 + 26)
+#define IRQ_EP93XX_UART3RX (IRQ_EP93XX_VIC0 + 27)
+#define IRQ_EP93XX_UART3TX (IRQ_EP93XX_VIC0 + 28)
+#define IRQ_EP93XX_KEY (IRQ_EP93XX_VIC0 + 29)
+#define IRQ_EP93XX_TOUCH (IRQ_EP93XX_VIC0 + 30)
+#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc
+
+#define IRQ_EP93XX_VIC1 (IRQ_EP93XX_VIC0 + 32)
+
+#define IRQ_EP93XX_EXT0 (IRQ_EP93XX_VIC1 + 0)
+#define IRQ_EP93XX_EXT1 (IRQ_EP93XX_VIC1 + 1)
+#define IRQ_EP93XX_EXT2 (IRQ_EP93XX_VIC1 + 2)
+#define IRQ_EP93XX_64HZ (IRQ_EP93XX_VIC1 + 3)
+#define IRQ_EP93XX_WATCHDOG (IRQ_EP93XX_VIC1 + 4)
+#define IRQ_EP93XX_RTC (IRQ_EP93XX_VIC1 + 5)
+#define IRQ_EP93XX_IRDA (IRQ_EP93XX_VIC1 + 6)
+#define IRQ_EP93XX_ETHERNET (IRQ_EP93XX_VIC1 + 7)
+#define IRQ_EP93XX_EXT3 (IRQ_EP93XX_VIC1 + 8)
+#define IRQ_EP93XX_PROG (IRQ_EP93XX_VIC1 + 9)
+#define IRQ_EP93XX_1HZ (IRQ_EP93XX_VIC1 + 10)
+#define IRQ_EP93XX_VSYNC (IRQ_EP93XX_VIC1 + 11)
+#define IRQ_EP93XX_VIDEO_FIFO (IRQ_EP93XX_VIC1 + 12)
+#define IRQ_EP93XX_SSP1RX (IRQ_EP93XX_VIC1 + 13)
+#define IRQ_EP93XX_SSP1TX (IRQ_EP93XX_VIC1 + 14)
+#define IRQ_EP93XX_GPIO4MUX (IRQ_EP93XX_VIC1 + 15)
+#define IRQ_EP93XX_GPIO5MUX (IRQ_EP93XX_VIC1 + 16)
+#define IRQ_EP93XX_GPIO6MUX (IRQ_EP93XX_VIC1 + 17)
+#define IRQ_EP93XX_GPIO7MUX (IRQ_EP93XX_VIC1 + 18)
+#define IRQ_EP93XX_TIMER3 (IRQ_EP93XX_VIC1 + 19)
+#define IRQ_EP93XX_UART1 (IRQ_EP93XX_VIC1 + 20)
+#define IRQ_EP93XX_SSP (IRQ_EP93XX_VIC1 + 21)
+#define IRQ_EP93XX_UART2 (IRQ_EP93XX_VIC1 + 22)
+#define IRQ_EP93XX_UART3 (IRQ_EP93XX_VIC1 + 23)
+#define IRQ_EP93XX_USB (IRQ_EP93XX_VIC1 + 24)
+#define IRQ_EP93XX_ETHERNET_PME (IRQ_EP93XX_VIC1 + 25)
+#define IRQ_EP93XX_DSP (IRQ_EP93XX_VIC1 + 26)
+#define IRQ_EP93XX_GPIO_AB (IRQ_EP93XX_VIC1 + 27)
+#define IRQ_EP93XX_SAI (IRQ_EP93XX_VIC1 + 28)
+#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
+
+#define NR_EP93XX_IRQS (IRQ_EP93XX_VIC1 + 32 + 24)
+
+#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS 32
+
+#endif
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
new file mode 100644
index 000000000..c121c459a
--- /dev/null
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-ep93xx/micro9.c
+ *
+ * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
+ * Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ * Hubert Feurstein <hubert.feurstein@contec.at>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include "hardware.h"
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "soc.h"
+
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a separate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
+ *************************************************************************/
+static unsigned int __init micro9_detect_bootwidth(void)
+{
+ u32 v;
+
+ /* Detect the bus width of the external flash memory */
+ v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+ if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+ return 4; /* 32-bit */
+ else
+ return 2; /* 16-bit */
+}
+
+static void __init micro9_register_flash(void)
+{
+ unsigned int width;
+
+ if (machine_is_micro9())
+ width = 4;
+ else if (machine_is_micro9m() || machine_is_micro9s())
+ width = micro9_detect_bootwidth();
+ else
+ width = 0;
+
+ if (width)
+ ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
+}
+
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data __initdata micro9_eth_data = {
+ .phy_id = 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_eth(&micro9_eth_data, 1);
+ micro9_register_flash();
+}
+
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MICRO9M
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MICRO9L
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ep93xx/platform.h b/arch/arm/mach-ep93xx/platform.h
new file mode 100644
index 000000000..5fb1b9191
--- /dev/null
+++ b/arch/arm/mach-ep93xx/platform.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-ep93xx/include/mach/platform.h
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/platform_data/eth-ep93xx.h>
+#include <linux/reboot.h>
+
+struct device;
+struct i2c_board_info;
+struct spi_board_info;
+struct platform_device;
+struct ep93xxfb_mach_info;
+struct ep93xx_keypad_platform_data;
+struct ep93xx_spi_info;
+
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+
+void ep93xx_register_flash(unsigned int width,
+ resource_size_t start, resource_size_t size);
+
+void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
+void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_spi(struct ep93xx_spi_info *info,
+ struct spi_board_info *devices, int num);
+void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
+void ep93xx_register_pwm(int pwm0, int pwm1);
+void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
+void ep93xx_register_i2s(void);
+void ep93xx_register_ac97(void);
+void ep93xx_register_ide(void);
+void ep93xx_register_adc(void);
+
+struct device *ep93xx_init_devices(void);
+extern void ep93xx_timer_init(void);
+
+void ep93xx_restart(enum reboot_mode, const char *);
+
+#endif
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
new file mode 100644
index 000000000..569e72413
--- /dev/null
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-ep93xx/simone.c
+ * Simplemachines Sim.One support.
+ *
+ * Copyright (C) 2010 Ryan Mallon
+ *
+ * Based on the 2.6.24.7 support:
+ * Copyright (C) 2009 Simplemachines
+ * MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+
+#include "hardware.h"
+#include "gpio-ep93xx.h"
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "soc.h"
+
+static struct ep93xx_eth_data __initdata simone_eth_data = {
+ .phy_id = 1,
+};
+
+static struct ep93xxfb_mach_info __initdata simone_fb_info = {
+ .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+};
+
+static struct mmc_spi_platform_data simone_mmc_spi_data = {
+ .detect_delay = 500,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
+ .dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
+ .table = {
+ /* Card detect */
+ GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct spi_board_info simone_spi_devices[] __initdata = {
+ {
+ .modalias = "mmc_spi",
+ .platform_data = &simone_mmc_spi_data,
+ /*
+ * We use 10 MHz even though the maximum is 3.7 MHz. The driver
+ * will limit it automatically to max. frequency.
+ */
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ },
+};
+
+/*
+ * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
+ * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
+ * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
+ */
+static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
+ .dev_id = "spi0",
+ .table = {
+ GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct ep93xx_spi_info simone_spi_info __initdata = {
+ .use_dma = 1,
+};
+
+static struct i2c_board_info __initdata simone_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+};
+
+static struct platform_device simone_audio_device = {
+ .name = "simone-audio",
+ .id = -1,
+};
+
+static void __init simone_register_audio(void)
+{
+ ep93xx_register_ac97();
+ platform_device_register(&simone_audio_device);
+}
+
+static void __init simone_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
+ ep93xx_register_eth(&simone_eth_data, 1);
+ ep93xx_register_fb(&simone_fb_info);
+ ep93xx_register_i2c(simone_i2c_board_info,
+ ARRAY_SIZE(simone_i2c_board_info));
+ gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
+ gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
+ ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
+ ARRAY_SIZE(simone_spi_devices));
+ simone_register_audio();
+}
+
+MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
+ /* Maintainer: Ryan Mallon */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = simone_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
new file mode 100644
index 000000000..1dfb72567
--- /dev/null
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-ep93xx/snappercl15.c
+ * Bluewater Systems Snapper CL15 system module
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ * Author: Ryan Mallon
+ *
+ * NAND code adapted from driver by:
+ * Andre Renaud <andre@bluewatersys.com>
+ * James R. McKaskill
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+
+#include <linux/mtd/platnand.h>
+
+#include "hardware.h"
+#include <linux/platform_data/video-ep93xx.h>
+#include "gpio-ep93xx.h"
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "soc.h"
+
+#define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M)
+
+#define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */
+#define SNAPPERCL15_NAND_ALE (1 << 9) /* Address latch */
+#define SNAPPERCL15_NAND_CLE (1 << 10) /* Command latch */
+#define SNAPPERCL15_NAND_CEN (1 << 11) /* Chip enable (active low) */
+#define SNAPPERCL15_NAND_RDY (1 << 14) /* Device ready */
+
+#define NAND_CTRL_ADDR(chip) (chip->legacy.IO_ADDR_W + 0x40)
+
+static void snappercl15_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
+ unsigned int ctrl)
+{
+ static u16 nand_state = SNAPPERCL15_NAND_WPN;
+ u16 set;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
+
+ if (ctrl & NAND_NCE)
+ set &= ~SNAPPERCL15_NAND_CEN;
+ if (ctrl & NAND_CLE)
+ set |= SNAPPERCL15_NAND_CLE;
+ if (ctrl & NAND_ALE)
+ set |= SNAPPERCL15_NAND_ALE;
+
+ nand_state &= ~(SNAPPERCL15_NAND_CEN |
+ SNAPPERCL15_NAND_CLE |
+ SNAPPERCL15_NAND_ALE);
+ nand_state |= set;
+ __raw_writew(nand_state, NAND_CTRL_ADDR(chip));
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ __raw_writew((cmd & 0xff) | nand_state,
+ chip->legacy.IO_ADDR_W);
+}
+
+static int snappercl15_nand_dev_ready(struct nand_chip *chip)
+{
+ return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
+}
+
+static struct mtd_partition snappercl15_nand_parts[] = {
+ {
+ .name = "Kernel",
+ .offset = 0,
+ .size = SZ_2M,
+ },
+ {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct platform_nand_data snappercl15_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .partitions = snappercl15_nand_parts,
+ .nr_partitions = ARRAY_SIZE(snappercl15_nand_parts),
+ .chip_delay = 25,
+ },
+ .ctrl = {
+ .dev_ready = snappercl15_nand_dev_ready,
+ .cmd_ctrl = snappercl15_nand_cmd_ctrl,
+ },
+};
+
+static struct resource snappercl15_nand_resource[] = {
+ {
+ .start = SNAPPERCL15_NAND_BASE,
+ .end = SNAPPERCL15_NAND_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device snappercl15_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev.platform_data = &snappercl15_nand_data,
+ .resource = snappercl15_nand_resource,
+ .num_resources = ARRAY_SIZE(snappercl15_nand_resource),
+};
+
+static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
+ .phy_id = 1,
+};
+
+static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
+ {
+ /* Audio codec */
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+};
+
+static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
+};
+
+static struct platform_device snappercl15_audio_device = {
+ .name = "snappercl15-audio",
+ .id = -1,
+};
+
+static void __init snappercl15_register_audio(void)
+{
+ ep93xx_register_i2s();
+ platform_device_register(&snappercl15_audio_device);
+}
+
+static void __init snappercl15_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_eth(&snappercl15_eth_data, 1);
+ ep93xx_register_i2c(snappercl15_i2c_data,
+ ARRAY_SIZE(snappercl15_i2c_data));
+ ep93xx_register_fb(&snappercl15_fb_info);
+ snappercl15_register_audio();
+ platform_device_register(&snappercl15_nand_device);
+}
+
+MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
+ /* Maintainer: Ryan Mallon */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = snappercl15_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
new file mode 100644
index 000000000..3245ebbd5
--- /dev/null
+++ b/arch/arm/mach-ep93xx/soc.h
@@ -0,0 +1,212 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * arch/arm/mach-ep93xx/soc.h
+ *
+ * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com>
+ * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com>
+ */
+
+#ifndef _EP93XX_SOC_H
+#define _EP93XX_SOC_H
+
+#include "ep93xx-regs.h"
+#include "irqs.h"
+
+/*
+ * EP93xx Physical Memory Map:
+ *
+ * The ASDO pin is sampled at system reset to select a synchronous or
+ * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up)
+ * the synchronous boot mode is selected. When ASDO is "0" (i.e
+ * pulled-down) the asynchronous boot mode is selected.
+ *
+ * In synchronous boot mode nSDCE3 is decoded starting at physical address
+ * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous
+ * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
+ * decoded at 0xf0000000.
+ *
+ * There is known errata for the EP93xx dealing with External Memory
+ * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design
+ * Guidelines" for more information. This document can be found at:
+ *
+ * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+ */
+
+#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */
+#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */
+#define EP93XX_CS1_PHYS_BASE 0x10000000
+#define EP93XX_CS2_PHYS_BASE 0x20000000
+#define EP93XX_CS3_PHYS_BASE 0x30000000
+#define EP93XX_PCMCIA_PHYS_BASE 0x40000000
+#define EP93XX_CS6_PHYS_BASE 0x60000000
+#define EP93XX_CS7_PHYS_BASE 0x70000000
+#define EP93XX_SDCE0_PHYS_BASE 0xc0000000
+#define EP93XX_SDCE1_PHYS_BASE 0xd0000000
+#define EP93XX_SDCE2_PHYS_BASE 0xe0000000
+#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */
+#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */
+
+/* AHB peripherals */
+#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
+
+#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000)
+#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
+
+#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000)
+#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
+
+#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000)
+#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
+
+#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
+
+#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000)
+
+#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000)
+
+#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
+
+#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000)
+#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
+
+#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
+
+#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000)
+
+/* APB peripherals */
+#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
+
+#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000)
+#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
+
+#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
+
+#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000)
+#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
+
+#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000)
+#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000)
+
+#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
+
+#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000)
+#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
+
+#define EP93XX_ADC_PHYS_BASE EP93XX_APB_PHYS(0x00100000)
+#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
+
+#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000)
+#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
+
+#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000)
+#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
+
+#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000)
+#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
+
+/* System controller */
+#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
+#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
+#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
+#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31)
+#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29)
+#define EP93XX_SYSCON_PWRCNT_USH_EN 28
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 27
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 26
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 25
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 24
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 23
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 22
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 21
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 20
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 19
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 18
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 17
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 16
+#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
+#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
+#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23)
+#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19)
+#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18)
+#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
+#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
+#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29)
+#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28)
+#define EP93XX_SYSCON_DEVCFG_GONK (1<<27)
+#define EP93XX_SYSCON_DEVCFG_TONG (1<<26)
+#define EP93XX_SYSCON_DEVCFG_MONG (1<<25)
+#define EP93XX_SYSCON_DEVCFG_U3EN 24
+#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23)
+#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22)
+#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21)
+#define EP93XX_SYSCON_DEVCFG_U2EN 20
+#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19)
+#define EP93XX_SYSCON_DEVCFG_U1EN 18
+#define EP93XX_SYSCON_DEVCFG_TIN (1<<17)
+#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15)
+#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14)
+#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13)
+#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12)
+#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11)
+#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10)
+#define EP93XX_SYSCON_DEVCFG_PONG (1<<9)
+#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8)
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7)
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6)
+#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4)
+#define EP93XX_SYSCON_DEVCFG_RAS (1<<3)
+#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2)
+#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1)
+#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0)
+#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84)
+#define EP93XX_SYSCON_CLKDIV_ENABLE 15
+#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14)
+#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13)
+#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8
+#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c)
+#define EP93XX_SYSCON_I2SCLKDIV_SENA 31
+#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29)
+#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19)
+#define EP93XX_I2SCLKDIV_SDIV (1 << 16)
+#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17)
+#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN 31
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV 16
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN 15
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
+#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
+#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
+
+/* EP93xx System Controller software locked register write */
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
+
+static inline void ep93xx_devcfg_set_bits(unsigned int bits)
+{
+ ep93xx_devcfg_set_clear(bits, 0x00);
+}
+
+static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
+{
+ ep93xx_devcfg_set_clear(0x00, bits);
+}
+
+#endif /* _EP93XX_SOC_H */
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
new file mode 100644
index 000000000..a9efa7bc2
--- /dev/null
+++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/sched_clock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/mach/time.h>
+#include "soc.h"
+#include "platform.h"
+
+/*************************************************************************
+ * Timer handling for EP93xx
+ *************************************************************************
+ * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
+ * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
+ * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
+ * is free-running, and can't generate interrupts.
+ *
+ * The 508 kHz timers are ideal for use for the timer interrupt, as the
+ * most common values of HZ divide 508 kHz nicely. We pick the 32 bit
+ * timer (timer 3) to get as long sleep intervals as possible when using
+ * CONFIG_NO_HZ.
+ *
+ * The higher clock rate of timer 4 makes it a better choice than the
+ * other timers for use as clock source and for sched_clock(), providing
+ * a stable 40 bit time base.
+ *************************************************************************
+ */
+#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
+#define EP93XX_TIMER123_CONTROL_MODE (1 << 6)
+#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
+#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
+#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
+
+#define EP93XX_TIMER123_RATE 508469
+#define EP93XX_TIMER4_RATE 983040
+
+static u64 notrace ep93xx_read_sched_clock(void)
+{
+ u64 ret;
+
+ ret = readl(EP93XX_TIMER4_VALUE_LOW);
+ ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
+ return ret;
+}
+
+static u64 ep93xx_clocksource_read(struct clocksource *c)
+{
+ u64 ret;
+
+ ret = readl(EP93XX_TIMER4_VALUE_LOW);
+ ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
+ return (u64) ret;
+}
+
+static int ep93xx_clkevt_set_next_event(unsigned long next,
+ struct clock_event_device *evt)
+{
+ /* Default mode: periodic, off, 508 kHz */
+ u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
+ EP93XX_TIMER123_CONTROL_CLKSEL;
+
+ /* Clear timer */
+ writel(tmode, EP93XX_TIMER3_CONTROL);
+
+ /* Set next event */
+ writel(next, EP93XX_TIMER3_LOAD);
+ writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
+ EP93XX_TIMER3_CONTROL);
+ return 0;
+}
+
+
+static int ep93xx_clkevt_shutdown(struct clock_event_device *evt)
+{
+ /* Disable timer */
+ writel(0, EP93XX_TIMER3_CONTROL);
+
+ return 0;
+}
+
+static struct clock_event_device ep93xx_clockevent = {
+ .name = "timer1",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = ep93xx_clkevt_shutdown,
+ .set_state_oneshot = ep93xx_clkevt_shutdown,
+ .tick_resume = ep93xx_clkevt_shutdown,
+ .set_next_event = ep93xx_clkevt_set_next_event,
+ .rating = 300,
+};
+
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ /* Writing any value clears the timer interrupt */
+ writel(1, EP93XX_TIMER3_CLEAR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+void __init ep93xx_timer_init(void)
+{
+ int irq = IRQ_EP93XX_TIMER3;
+ unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
+
+ /* Enable and register clocksource and sched_clock on timer 4 */
+ writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
+ EP93XX_TIMER4_VALUE_HIGH);
+ clocksource_mmio_init(NULL, "timer4",
+ EP93XX_TIMER4_RATE, 200, 40,
+ ep93xx_clocksource_read);
+ sched_clock_register(ep93xx_read_sched_clock, 40,
+ EP93XX_TIMER4_RATE);
+
+ /* Set up clockevent on timer 3 */
+ if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
+ &ep93xx_clockevent))
+ pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
+ clockevents_config_and_register(&ep93xx_clockevent,
+ EP93XX_TIMER123_RATE,
+ 1,
+ 0xffffffffU);
+}
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
new file mode 100644
index 000000000..d3de7283e
--- /dev/null
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-ep93xx/ts72xx.c
+ * Technologic Systems TS72xx SBC support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/platnand.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_data/spi-ep93xx.h>
+#include <linux/gpio/machine.h>
+
+#include "gpio-ep93xx.h"
+#include "hardware.h"
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+#include "soc.h"
+#include "ts72xx.h"
+
+/*************************************************************************
+ * IO map
+ *************************************************************************/
+static struct map_desc ts72xx_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
+ .length = TS72XX_MODEL_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
+ .length = TS72XX_OPTIONS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
+ .length = TS72XX_OPTIONS2_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)TS72XX_CPLDVER_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE),
+ .length = TS72XX_CPLDVER_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+static void __init ts72xx_map_io(void)
+{
+ ep93xx_map_io();
+ iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
+}
+
+
+/*************************************************************************
+ * NAND flash
+ *************************************************************************/
+#define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */
+#define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */
+
+static void ts72xx_nand_hwcontrol(struct nand_chip *chip,
+ int cmd, unsigned int ctrl)
+{
+ if (ctrl & NAND_CTRL_CHANGE) {
+ void __iomem *addr = chip->legacy.IO_ADDR_R;
+ unsigned char bits;
+
+ addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE);
+
+ bits = __raw_readb(addr) & ~0x07;
+ bits |= (ctrl & NAND_NCE) << 2; /* bit 0 -> bit 2 */
+ bits |= (ctrl & NAND_CLE); /* bit 1 -> bit 1 */
+ bits |= (ctrl & NAND_ALE) >> 2; /* bit 2 -> bit 0 */
+
+ __raw_writeb(bits, addr);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ __raw_writeb(cmd, chip->legacy.IO_ADDR_W);
+}
+
+static int ts72xx_nand_device_ready(struct nand_chip *chip)
+{
+ void __iomem *addr = chip->legacy.IO_ADDR_R;
+
+ addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
+
+ return !!(__raw_readb(addr) & 0x20);
+}
+
+#define TS72XX_BOOTROM_PART_SIZE (SZ_16K)
+#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M)
+
+static struct mtd_partition ts72xx_nand_parts[] = {
+ {
+ .name = "TS-BOOTROM",
+ .offset = 0,
+ .size = TS72XX_BOOTROM_PART_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "Linux",
+ .offset = MTDPART_OFS_RETAIN,
+ .size = TS72XX_REDBOOT_PART_SIZE,
+ /* leave so much for last partition */
+ }, {
+ .name = "RedBoot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+};
+
+static struct platform_nand_data ts72xx_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .chip_delay = 15,
+ },
+ .ctrl = {
+ .cmd_ctrl = ts72xx_nand_hwcontrol,
+ .dev_ready = ts72xx_nand_device_ready,
+ },
+};
+
+static struct resource ts72xx_nand_resource[] = {
+ {
+ .start = 0, /* filled in later */
+ .end = 0, /* filled in later */
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ts72xx_nand_flash = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev.platform_data = &ts72xx_nand_data,
+ .resource = ts72xx_nand_resource,
+ .num_resources = ARRAY_SIZE(ts72xx_nand_resource),
+};
+
+static void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
+ resource_size_t start)
+{
+ /*
+ * TS7200 has NOR flash all other TS72xx board have NAND flash.
+ */
+ if (board_is_ts7200()) {
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+ } else {
+ ts72xx_nand_resource[0].start = start;
+ ts72xx_nand_resource[0].end = start + SZ_16M - 1;
+
+ ts72xx_nand_data.chip.partitions = parts;
+ ts72xx_nand_data.chip.nr_partitions = n;
+
+ platform_device_register(&ts72xx_nand_flash);
+ }
+}
+
+/*************************************************************************
+ * RTC M48T86
+ *************************************************************************/
+#define TS72XX_RTC_INDEX_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x00800000)
+#define TS72XX_RTC_DATA_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x01700000)
+
+static struct resource ts72xx_rtc_resources[] = {
+ DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01),
+ DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01),
+};
+
+static struct platform_device ts72xx_rtc_device = {
+ .name = "rtc-m48t86",
+ .id = -1,
+ .resource = ts72xx_rtc_resources,
+ .num_resources = ARRAY_SIZE(ts72xx_rtc_resources),
+};
+
+/*************************************************************************
+ * Watchdog (in CPLD)
+ *************************************************************************/
+#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000)
+#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000)
+
+static struct resource ts72xx_wdt_resources[] = {
+ DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01),
+ DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01),
+};
+
+static struct platform_device ts72xx_wdt_device = {
+ .name = "ts72xx-wdt",
+ .id = -1,
+ .resource = ts72xx_wdt_resources,
+ .num_resources = ARRAY_SIZE(ts72xx_wdt_resources),
+};
+
+/*************************************************************************
+ * ETH
+ *************************************************************************/
+static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
+ .phy_id = 1,
+};
+
+/*************************************************************************
+ * SPI SD/MMC host
+ *************************************************************************/
+#define BK3_EN_SDCARD_PHYS_BASE 0x12400000
+#define BK3_EN_SDCARD_PWR 0x0
+#define BK3_DIS_SDCARD_PWR 0x0C
+static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd)
+{
+ void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K);
+
+ if (!pwr_sd) {
+ pr_err("Failed to enable SD card power!");
+ return;
+ }
+
+ pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__,
+ !!vdd ? "ON" : "OFF", vdd);
+
+ if (!!vdd)
+ __raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd);
+ else
+ __raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd);
+
+ iounmap(pwr_sd);
+}
+
+static struct mmc_spi_platform_data bk3_spi_mmc_data = {
+ .detect_delay = 500,
+ .powerup_msecs = 100,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .caps = MMC_CAP_NONREMOVABLE,
+ .setpower = bk3_mmc_spi_setpower,
+};
+
+/*************************************************************************
+ * SPI Bus - SD card access
+ *************************************************************************/
+static struct spi_board_info bk3_spi_board_info[] __initdata = {
+ {
+ .modalias = "mmc_spi",
+ .platform_data = &bk3_spi_mmc_data,
+ .max_speed_hz = 7.4E6,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+/*
+ * This is a stub -> the FGPIO[3] pin is not connected on the schematic
+ * The all work is performed automatically by !SPI_FRAME (SFRM1) and
+ * goes through CPLD
+ */
+static struct gpiod_lookup_table bk3_spi_cs_gpio_table = {
+ .dev_id = "spi0",
+ .table = {
+ GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct ep93xx_spi_info bk3_spi_master __initdata = {
+ .use_dma = 1,
+};
+
+/*************************************************************************
+ * TS72XX support code
+ *************************************************************************/
+#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
+
+/* Relative to EP93XX_CS1_PHYS_BASE */
+#define TS73XX_FPGA_LOADER_BASE 0x03c00000
+
+static struct resource ts73xx_fpga_resources[] = {
+ {
+ .start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE,
+ .end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ts73xx_fpga_device = {
+ .name = "ts73xx-fpga-mgr",
+ .id = -1,
+ .resource = ts73xx_fpga_resources,
+ .num_resources = ARRAY_SIZE(ts73xx_fpga_resources),
+};
+
+#endif
+
+/*************************************************************************
+ * SPI Bus
+ *************************************************************************/
+static struct spi_board_info ts72xx_spi_devices[] __initdata = {
+ {
+ .modalias = "tmp122",
+ .max_speed_hz = 2 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = {
+ .dev_id = "spi0",
+ .table = {
+ /* DIO_17 */
+ GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct ep93xx_spi_info ts72xx_spi_info __initdata = {
+ /* Intentionally left blank */
+};
+
+static void __init ts72xx_init_machine(void)
+{
+ ep93xx_init_devices();
+ ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts),
+ is_ts9420_installed() ?
+ EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE);
+ platform_device_register(&ts72xx_rtc_device);
+ platform_device_register(&ts72xx_wdt_device);
+
+ ep93xx_register_eth(&ts72xx_eth_data, 1);
+#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
+ if (board_is_ts7300())
+ platform_device_register(&ts73xx_fpga_device);
+#endif
+ gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table);
+ ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
+ ARRAY_SIZE(ts72xx_spi_devices));
+}
+
+MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ts72xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = ts72xx_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
+
+/*************************************************************************
+ * EP93xx I2S audio peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_i2s_resource[] = {
+ DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
+ DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"),
+};
+
+static struct platform_device ep93xx_i2s_device = {
+ .name = "ep93xx-spilink-i2s",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_i2s_resource),
+ .resource = ep93xx_i2s_resource,
+};
+
+/*************************************************************************
+ * BK3 support code
+ *************************************************************************/
+static struct mtd_partition bk3_nand_parts[] = {
+ {
+ .name = "System",
+ .offset = 0x00000000,
+ .size = 0x01e00000,
+ }, {
+ .name = "Data",
+ .offset = 0x01e00000,
+ .size = 0x05f20000
+ }, {
+ .name = "RedBoot",
+ .offset = 0x07d20000,
+ .size = 0x002e0000,
+ .mask_flags = MTD_WRITEABLE, /* force RO */
+ },
+};
+
+static void __init bk3_init_machine(void)
+{
+ ep93xx_init_devices();
+
+ ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts),
+ EP93XX_CS6_PHYS_BASE);
+
+ ep93xx_register_eth(&ts72xx_eth_data, 1);
+
+ gpiod_add_lookup_table(&bk3_spi_cs_gpio_table);
+ ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info,
+ ARRAY_SIZE(bk3_spi_board_info));
+
+ /* Configure ep93xx's I2S to use AC97 pins */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
+ platform_device_register(&ep93xx_i2s_device);
+}
+
+MACHINE_START(BK3, "Liebherr controller BK3.1")
+ /* Maintainer: Lukasz Majewski <lukma@denx.de> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
+ .map_io = ts72xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = bk3_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h
new file mode 100644
index 000000000..00b4941d2
--- /dev/null
+++ b/arch/arm/mach-ep93xx/ts72xx.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-ep93xx/include/mach/ts72xx.h
+ */
+
+/*
+ * TS72xx memory map:
+ *
+ * virt phys size
+ * febff000 22000000 4K model number register (bits 0-2)
+ * febfe000 22400000 4K options register
+ * febfd000 22800000 4K options register #2
+ * febfc000 23400000 4K CPLD version register
+ */
+
+#ifndef __TS72XX_H_
+#define __TS72XX_H_
+
+#define TS72XX_MODEL_PHYS_BASE 0x22000000
+#define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000)
+#define TS72XX_MODEL_SIZE 0x00001000
+
+#define TS72XX_MODEL_TS7200 0x00
+#define TS72XX_MODEL_TS7250 0x01
+#define TS72XX_MODEL_TS7260 0x02
+#define TS72XX_MODEL_TS7300 0x03
+#define TS72XX_MODEL_TS7400 0x04
+#define TS72XX_MODEL_MASK 0x07
+
+
+#define TS72XX_OPTIONS_PHYS_BASE 0x22400000
+#define TS72XX_OPTIONS_VIRT_BASE IOMEM(0xfebfe000)
+#define TS72XX_OPTIONS_SIZE 0x00001000
+
+#define TS72XX_OPTIONS_COM2_RS485 0x02
+#define TS72XX_OPTIONS_MAX197 0x01
+
+
+#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000
+#define TS72XX_OPTIONS2_VIRT_BASE IOMEM(0xfebfd000)
+#define TS72XX_OPTIONS2_SIZE 0x00001000
+
+#define TS72XX_OPTIONS2_TS9420 0x04
+#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
+
+#define TS72XX_CPLDVER_PHYS_BASE 0x23400000
+#define TS72XX_CPLDVER_VIRT_BASE IOMEM(0xfebfc000)
+#define TS72XX_CPLDVER_SIZE 0x00001000
+
+#ifndef __ASSEMBLY__
+
+static inline int ts72xx_model(void)
+{
+ return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
+}
+
+static inline int board_is_ts7200(void)
+{
+ return ts72xx_model() == TS72XX_MODEL_TS7200;
+}
+
+static inline int board_is_ts7250(void)
+{
+ return ts72xx_model() == TS72XX_MODEL_TS7250;
+}
+
+static inline int board_is_ts7260(void)
+{
+ return ts72xx_model() == TS72XX_MODEL_TS7260;
+}
+
+static inline int board_is_ts7300(void)
+{
+ return ts72xx_model() == TS72XX_MODEL_TS7300;
+}
+
+static inline int board_is_ts7400(void)
+{
+ return ts72xx_model() == TS72XX_MODEL_TS7400;
+}
+
+static inline int is_max197_installed(void)
+{
+ return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
+ TS72XX_OPTIONS_MAX197);
+}
+
+static inline int is_ts9420_installed(void)
+{
+ return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
+ TS72XX_OPTIONS2_TS9420);
+}
+#endif
+#endif /* __TS72XX_H_ */
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
new file mode 100644
index 000000000..30d9cf379
--- /dev/null
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-ep93xx/vision_ep9307.c
+ * Vision Engraving Systems EP9307 SoM support.
+ *
+ * Copyright (C) 2008-2011 Vision Engraving Systems
+ * H Hartley Sweeten <hsweeten@visionengravers.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+
+#include <sound/cs4271.h>
+
+#include "hardware.h"
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
+#include "gpio-ep93xx.h"
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+#include "soc.h"
+
+/*************************************************************************
+ * Static I/O mappings for the FPGA
+ *************************************************************************/
+#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE
+#define VISION_VIRT_BASE 0xfebff000
+
+static struct map_desc vision_io_desc[] __initdata = {
+ {
+ .virtual = VISION_VIRT_BASE,
+ .pfn = __phys_to_pfn(VISION_PHYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init vision_map_io(void)
+{
+ ep93xx_map_io();
+
+ iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
+}
+
+/*************************************************************************
+ * Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data vision_eth_data __initdata = {
+ .phy_id = 1,
+};
+
+/*************************************************************************
+ * Framebuffer
+ *************************************************************************/
+#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1
+
+static int vision_lcd_setup(struct platform_device *pdev)
+{
+ int err;
+
+ err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
+ dev_name(&pdev->dev));
+ if (err)
+ return err;
+
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
+ EP93XX_SYSCON_DEVCFG_RASONP3 |
+ EP93XX_SYSCON_DEVCFG_EXVC);
+
+ return 0;
+}
+
+static void vision_lcd_teardown(struct platform_device *pdev)
+{
+ gpio_free(VISION_LCD_ENABLE);
+}
+
+static void vision_lcd_blank(int blank_mode, struct fb_info *info)
+{
+ if (blank_mode)
+ gpio_set_value(VISION_LCD_ENABLE, 0);
+ else
+ gpio_set_value(VISION_LCD_ENABLE, 1);
+}
+
+static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
+ .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+ .setup = vision_lcd_setup,
+ .teardown = vision_lcd_teardown,
+ .blank = vision_lcd_blank,
+};
+
+
+/*************************************************************************
+ * GPIO Expanders
+ *************************************************************************/
+#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1)
+#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16)
+#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16)
+#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16)
+
+static struct pca953x_platform_data pca953x_74_gpio_data = {
+ .gpio_base = PCA9539_74_GPIO_BASE,
+ .irq_base = EP93XX_BOARD_IRQ(0),
+};
+
+static struct pca953x_platform_data pca953x_75_gpio_data = {
+ .gpio_base = PCA9539_75_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data pca953x_76_gpio_data = {
+ .gpio_base = PCA9539_76_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data pca953x_77_gpio_data = {
+ .gpio_base = PCA9539_77_GPIO_BASE,
+ .irq_base = -1,
+};
+
+/*************************************************************************
+ * I2C Bus
+ *************************************************************************/
+
+static struct i2c_board_info vision_i2c_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ .irq = IRQ_EP93XX_EXT1,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x74),
+ .platform_data = &pca953x_74_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x75),
+ .platform_data = &pca953x_75_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x76),
+ .platform_data = &pca953x_76_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x77),
+ .platform_data = &pca953x_77_gpio_data,
+ },
+};
+
+/*************************************************************************
+ * SPI CS4271 Audio Codec
+ *************************************************************************/
+static struct cs4271_platform_data vision_cs4271_data = {
+ .gpio_nreset = EP93XX_GPIO_LINE_H(2),
+};
+
+/*************************************************************************
+ * SPI Flash
+ *************************************************************************/
+static struct mtd_partition vision_spi_flash_partitions[] = {
+ {
+ .name = "SPI bootstrap",
+ .offset = 0,
+ .size = SZ_4K,
+ }, {
+ .name = "Bootstrap config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4K,
+ }, {
+ .name = "System config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data vision_spi_flash_data = {
+ .name = "SPI Flash",
+ .parts = vision_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions),
+};
+
+/*************************************************************************
+ * SPI SD/MMC host
+ *************************************************************************/
+static struct mmc_spi_platform_data vision_spi_mmc_data = {
+ .detect_delay = 100,
+ .powerup_msecs = 100,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
+};
+
+static struct gpiod_lookup_table vision_spi_mmc_gpio_table = {
+ .dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */
+ .table = {
+ /* Card detect */
+ GPIO_LOOKUP_IDX("B", 7, NULL, 0, GPIO_ACTIVE_LOW),
+ /* Write protect */
+ GPIO_LOOKUP_IDX("F", 0, NULL, 1, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+/*************************************************************************
+ * SPI Bus
+ *************************************************************************/
+static struct spi_board_info vision_spi_board_info[] __initdata = {
+ {
+ .modalias = "cs4271",
+ .platform_data = &vision_cs4271_data,
+ .max_speed_hz = 6000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ }, {
+ .modalias = "sst25l",
+ .platform_data = &vision_spi_flash_data,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = SPI_MODE_3,
+ }, {
+ .modalias = "mmc_spi",
+ .platform_data = &vision_spi_mmc_data,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 2,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
+ .dev_id = "spi0",
+ .table = {
+ GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("G", 2, "cs", 2, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct ep93xx_spi_info vision_spi_master __initdata = {
+ .use_dma = 1,
+};
+
+/*************************************************************************
+ * I2S Audio
+ *************************************************************************/
+static struct platform_device vision_audio_device = {
+ .name = "edb93xx-audio",
+ .id = -1,
+};
+
+static void __init vision_register_i2s(void)
+{
+ ep93xx_register_i2s();
+ platform_device_register(&vision_audio_device);
+}
+
+/*************************************************************************
+ * Machine Initialization
+ *************************************************************************/
+static void __init vision_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
+ ep93xx_register_eth(&vision_eth_data, 1);
+ ep93xx_register_fb(&ep93xxfb_info);
+ ep93xx_register_pwm(1, 0);
+
+ /*
+ * Request the gpio expander's interrupt gpio line now to prevent
+ * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
+ */
+ if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
+ "pca9539:74"))
+ pr_warn("cannot request interrupt gpio for pca9539:74\n");
+
+ vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
+
+ ep93xx_register_i2c(vision_i2c_info,
+ ARRAY_SIZE(vision_i2c_info));
+ gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
+ gpiod_add_lookup_table(&vision_spi_cs_gpio_table);
+ ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
+ ARRAY_SIZE(vision_spi_board_info));
+ vision_register_i2s();
+}
+
+MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
+ .map_io = vision_map_io,
+ .init_irq = ep93xx_init_irq,
+ .init_time = ep93xx_timer_init,
+ .init_machine = vision_init_machine,
+ .restart = ep93xx_restart,
+MACHINE_END