summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/proc-arm1022.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mm/proc-arm1022.S')
-rw-r--r--arch/arm/mm/proc-arm1022.S469
1 files changed, 469 insertions, 0 deletions
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
new file mode 100644
index 000000000..e89ce467f
--- /dev/null
+++ b/arch/arm/mm/proc-arm1022.S
@@ -0,0 +1,469 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * linux/arch/arm/mm/proc-arm1022.S: MMU functions for ARM1022E
+ *
+ * Copyright (C) 2000 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the ARM1022E.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/pgtable.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/ptrace.h>
+
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions. Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define MAX_AREA_SIZE 32768
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 16
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES 64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintenance instructions.
+ */
+#define CACHE_DLIMIT 32768
+
+ .text
+/*
+ * cpu_arm1022_proc_init()
+ */
+ENTRY(cpu_arm1022_proc_init)
+ ret lr
+
+/*
+ * cpu_arm1022_proc_fin()
+ */
+ENTRY(cpu_arm1022_proc_fin)
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ret lr
+
+/*
+ * cpu_arm1022_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ .pushsection .idmap.text, "ax"
+ENTRY(cpu_arm1022_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ ret r0
+ENDPROC(cpu_arm1022_reset)
+ .popsection
+
+/*
+ * cpu_arm1022_do_idle()
+ */
+ .align 5
+ENTRY(cpu_arm1022_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ ret lr
+
+/* ================================= CACHE ================================ */
+
+ .align 5
+
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1022_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+#endif
+ ret lr
+ENDPROC(arm1022_flush_icache_all)
+
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(arm1022_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm1022_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 15 to 0
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ ret lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags for this space
+ */
+ENTRY(arm1022_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bhs __flush_whole_cache
+
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ tst r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+#endif
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ ret lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1022_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1022_coherent_user_range)
+ mov ip, #0
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov r0, #0
+ ret lr
+
+/*
+ * flush_kern_dcache_area(void *addr, size_t size)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - kernel address
+ * - size - region size
+ */
+ENTRY(arm1022_flush_kern_dcache_area)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ add r1, r0, r1
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ ret lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+arm1022_dma_inv_range:
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ ret lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+arm1022_dma_clean_range:
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ ret lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm1022_dma_flush_range)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ ret lr
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1022_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1022_dma_clean_range
+ bcs arm1022_dma_inv_range
+ b arm1022_dma_flush_range
+ENDPROC(arm1022_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1022_dma_unmap_area)
+ ret lr
+ENDPROC(arm1022_dma_unmap_area)
+
+ .globl arm1022_flush_kern_cache_louis
+ .equ arm1022_flush_kern_cache_louis, arm1022_flush_kern_cache_all
+
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm1022
+
+ .align 5
+ENTRY(cpu_arm1022_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov ip, #0
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ ret lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm1022_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_arm1022_switch_mm)
+#ifdef CONFIG_MMU
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 15 to 0
+#endif
+ mov r1, #0
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
+#endif
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+#endif
+ ret lr
+
+/*
+ * cpu_arm1022_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_arm1022_set_pte_ext)
+#ifdef CONFIG_MMU
+ armv3_set_pte_ext
+ mov r0, r0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+#endif /* CONFIG_MMU */
+ ret lr
+
+ .type __arm1022_setup, #function
+__arm1022_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
+ adr r5, arm1022_crval
+ ldmia r5, {r5, r6}
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ bic r0, r0, r5
+ orr r0, r0, r6
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x4000 @ .R..............
+#endif
+ ret lr
+ .size __arm1022_setup, . - __arm1022_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 1001 ..11 0101
+ *
+ */
+ .type arm1022_crval, #object
+arm1022_crval:
+ crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
+
+ __INITDATA
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm1022, dabort=v4t_early_abort, pabort=legacy_pabort
+
+ .section ".rodata"
+
+ string cpu_arch_name, "armv5te"
+ string cpu_elf_name, "v5"
+ string cpu_arm1022_name, "ARM1022"
+
+ .align
+
+ .section ".proc.info.init", "a"
+
+ .type __arm1022_proc_info,#object
+__arm1022_proc_info:
+ .long 0x4105a220 @ ARM 1022E (v5TE)
+ .long 0xff0ffff0
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ initfn __arm1022_setup, __arm1022_proc_info
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
+ .long cpu_arm1022_name
+ .long arm1022_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long arm1022_cache_fns
+ .size __arm1022_proc_info, . - __arm1022_proc_info