summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/bitmain
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/bitmain')
-rw-r--r--arch/arm64/boot/dts/bitmain/Makefile3
-rw-r--r--arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts184
-rw-r--r--arch/arm64/boot/dts/bitmain/bm1880.dtsi226
3 files changed, 413 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/bitmain/Makefile b/arch/arm64/boot/dts/bitmain/Makefile
new file mode 100644
index 000000000..be90a6071
--- /dev/null
+++ b/arch/arm64/boot/dts/bitmain/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_ARCH_BITMAIN) += bm1880-sophon-edge.dtb
diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
new file mode 100644
index 000000000..7a2c7f9c2
--- /dev/null
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "bm1880.dtsi"
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "sophon-edge-schematics"
+ * version, 1.0210.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
+/ {
+ compatible = "bitmain,sophon-edge", "bitmain,bm1880";
+ model = "Sophon Edge";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart2;
+ serial2 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
+ };
+
+ soc {
+ gpio0: gpio@50027000 {
+ porta: gpio-controller@0 {
+ gpio-line-names =
+ "GPIO-A", /* GPIO0, LSEC pin 23 */
+ "GPIO-C", /* GPIO1, LSEC pin 25 */
+ "[GPIO2_PHY0_RST]", /* GPIO2 */
+ "GPIO-E", /* GPIO3, LSEC pin 27 */
+ "[USB_DET]", /* GPIO4 */
+ "[EN_P5V]", /* GPIO5 */
+ "[VDDIO_MS1_SEL]", /* GPIO6 */
+ "GPIO-G", /* GPIO7, LSEC pin 29 */
+ "[BM_TUSB_RST_L]", /* GPIO8 */
+ "[EN_P5V_USBHUB]", /* GPIO9 */
+ "NC",
+ "LED_WIFI", /* GPIO11 */
+ "LED_BT", /* GPIO12 */
+ "[BM_BLM8221_EN_L]", /* GPIO13 */
+ "NC", /* GPIO14 */
+ "NC", /* GPIO15 */
+ "NC", /* GPIO16 */
+ "NC", /* GPIO17 */
+ "NC", /* GPIO18 */
+ "NC", /* GPIO19 */
+ "NC", /* GPIO20 */
+ "NC", /* GPIO21 */
+ "NC", /* GPIO22 */
+ "NC", /* GPIO23 */
+ "NC", /* GPIO24 */
+ "NC", /* GPIO25 */
+ "NC", /* GPIO26 */
+ "NC", /* GPIO27 */
+ "NC", /* GPIO28 */
+ "NC", /* GPIO29 */
+ "NC", /* GPIO30 */
+ "NC"; /* GPIO31 */
+ };
+ };
+
+ gpio1: gpio@50027400 {
+ portb: gpio-controller@0 {
+ gpio-line-names =
+ "NC", /* GPIO32 */
+ "NC", /* GPIO33 */
+ "[I2C0_SDA]", /* GPIO34, LSEC pin 17 */
+ "[I2C0_SCL]", /* GPIO35, LSEC pin 15 */
+ "[JTAG0_TDO]", /* GPIO36 */
+ "[JTAG0_TCK]", /* GPIO37 */
+ "[JTAG0_TDI]", /* GPIO38 */
+ "[JTAG0_TMS]", /* GPIO39 */
+ "[JTAG0_TRST_X]", /* GPIO40 */
+ "[JTAG1_TDO]", /* GPIO41 */
+ "[JTAG1_TCK]", /* GPIO42 */
+ "[JTAG1_TDI]", /* GPIO43 */
+ "[CPU_TX]", /* GPIO44 */
+ "[CPU_RX]", /* GPIO45 */
+ "[UART1_TXD]", /* GPIO46 */
+ "[UART1_RXD]", /* GPIO47 */
+ "[UART0_TXD]", /* GPIO48 */
+ "[UART0_RXD]", /* GPIO49 */
+ "GPIO-I", /* GPIO50, LSEC pin 31 */
+ "GPIO-K", /* GPIO51, LSEC pin 33 */
+ "USER_LED2", /* GPIO52 */
+ "USER_LED1", /* GPIO53 */
+ "[UART0_RTS]", /* GPIO54 */
+ "[UART0_CTS]", /* GPIO55 */
+ "USER_LED4", /* GPIO56, JTAG1_TRST_X */
+ "USER_LED3", /* GPIO57, JTAG1_TMS */
+ "[I2S0_SCLK]", /* GPIO58 */
+ "[I2S0_FS]", /* GPIO59 */
+ "[I2S0_SDI]", /* GPIO60 */
+ "[I2S0_SDO]", /* GPIO61 */
+ "GPIO-B", /* GPIO62, LSEC pin 24 */
+ "GPIO-F"; /* GPIO63, I2S1_SCLK, LSEC pin 28 */
+ };
+ };
+
+ gpio2: gpio@50027800 {
+ portc: gpio-controller@0 {
+ gpio-line-names =
+ "GPIO-D", /* GPIO64, I2S1_FS, LSEC pin 26 */
+ "GPIO-J", /* GPIO65, I2S1_SDI, LSEC pin 32 */
+ "GPIO-H", /* GPIO66, I2S1_SDO, LSEC pin 30 */
+ "GPIO-L", /* GPIO67, LSEC pin 34 */
+ "[SPI0_CS]", /* GPIO68, SPI1_CS, LSEC pin 12 */
+ "[SPI0_DIN]", /* GPIO69, SPI1_SDI, LSEC pin 10 */
+ "[SPI0_DOUT]", /* GPIO70, SPI1_SDO, LSEC pin 14 */
+ "[SPI0_SCLK]"; /* GPIO71, SPI1_SCK, LSEC pin 8 */
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl_uart0_default: pinctrl-uart0-default {
+ pinmux {
+ groups = "uart0_grp";
+ function = "uart0";
+ };
+ };
+
+ pinctrl_uart1_default: pinctrl-uart1-default {
+ pinmux {
+ groups = "uart1_grp";
+ function = "uart1";
+ };
+ };
+
+ pinctrl_uart2_default: pinctrl-uart2-default {
+ pinmux {
+ groups = "uart2_grp";
+ function = "uart2";
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_default>;
+};
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
new file mode 100644
index 000000000..53a9b7605
--- /dev/null
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <dt-bindings/clock/bm1880-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/bitmain,bm1880-reset.h>
+
+/ {
+ compatible = "bitmain,bm1880";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secmon@100000000 {
+ reg = <0x1 0x00000000 0x0 0x20000>;
+ no-map;
+ };
+
+ jpu@130000000 {
+ reg = <0x1 0x30000000 0x0 0x08000000>; // 128M
+ no-map;
+ };
+
+ vpu@138000000 {
+ reg = <0x1 0x38000000 0x0 0x08000000>; // 128M
+ no-map;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ osc: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@50001000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0x50001000 0x0 0x1000>,
+ <0x0 0x50002000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ sctrl: system-controller@50010000 {
+ compatible = "bitmain,bm1880-sctrl", "syscon",
+ "simple-mfd";
+ reg = <0x0 0x50010000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x50010000 0x1000>;
+
+ pinctrl: pinctrl@400 {
+ compatible = "bitmain,bm1880-pinctrl";
+ reg = <0x400 0x120>;
+ };
+
+ clk: clock-controller@e8 {
+ compatible = "bitmain,bm1880-clk";
+ reg = <0xe8 0x0c>, <0x800 0xb0>;
+ reg-names = "pll", "sys";
+ clocks = <&osc>;
+ clock-names = "osc";
+ #clock-cells = <1>;
+ };
+
+ rst: reset-controller@c00 {
+ compatible = "bitmain,bm1880-reset";
+ reg = <0xc00 0x8>;
+ #reset-cells = <1>;
+ };
+ };
+
+ gpio0: gpio@50027000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0 0x50027000 0x0 0x400>;
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@50027400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0 0x50027400 0x0 0x400>;
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio2: gpio@50027800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0 0x50027800 0x0 0x400>;
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ uart0: serial@58018000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x58018000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ resets = <&rst BM1880_RST_UART0_1_CLK>;
+ status = "disabled";
+ };
+
+ uart1: serial@5801A000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x5801a000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ resets = <&rst BM1880_RST_UART0_1_ACLK>;
+ status = "disabled";
+ };
+
+ uart2: serial@5801C000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x5801c000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ resets = <&rst BM1880_RST_UART2_3_CLK>;
+ status = "disabled";
+ };
+
+ uart3: serial@5801E000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x5801e000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ resets = <&rst BM1880_RST_UART2_3_ACLK>;
+ status = "disabled";
+ };
+ };
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 06:01:32 +0000