diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/r8a77970-eagle.dts')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts new file mode 100644 index 000000000..004a5eacd --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Eagle board with R-Car V3M + * + * Copyright (C) 2016-2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a77970.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Renesas Eagle board based on r8a77970"; + compatible = "renesas,eagle", "renesas,r8a77970"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + serial0 = &scif0; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + + d3p3: regulator-fixed { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + + vcc-supply = <&d3p3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + x1_clk: x1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + renesas,no-ether-link; + phy-handle = <&phy0>; + rx-internal-delay-ps = <1800>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; +}; + +&csi40 { + status = "okay"; + + ports { + port@0 { + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out0>; + }; + }; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, <&x1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + gmsl0: gmsl-deserializer@48 { + compatible = "maxim,max9286"; + reg = <0x48>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&pfc { + avb_pins: avb0 { + groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; + function = "avb0"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data_a"; + function = "canfd0"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c3_pins: i2c3 { + groups = "i2c3_a"; + function = "i2c3"; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; +}; + +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; |