diff options
Diffstat (limited to 'arch/microblaze/mm/init.c')
-rw-r--r-- | arch/microblaze/mm/init.c | 307 |
1 files changed, 307 insertions, 0 deletions
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c new file mode 100644 index 000000000..353fabdfc --- /dev/null +++ b/arch/microblaze/mm/init.c @@ -0,0 +1,307 @@ +/* + * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/dma-map-ops.h> +#include <linux/memblock.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mm.h> /* mem_init */ +#include <linux/initrd.h> +#include <linux/of_fdt.h> +#include <linux/pagemap.h> +#include <linux/pfn.h> +#include <linux/slab.h> +#include <linux/swap.h> +#include <linux/export.h> + +#include <asm/page.h> +#include <asm/mmu_context.h> +#include <asm/pgalloc.h> +#include <asm/sections.h> +#include <asm/tlb.h> +#include <asm/fixmap.h> + +/* Use for MMU and noMMU because of PCI generic code */ +int mem_init_done; + +char *klimit = _end; + +/* + * Initialize the bootmem system and give it all the memory we + * have available. + */ +unsigned long memory_start; +EXPORT_SYMBOL(memory_start); +unsigned long memory_size; +EXPORT_SYMBOL(memory_size); +unsigned long lowmem_size; + +EXPORT_SYMBOL(min_low_pfn); +EXPORT_SYMBOL(max_low_pfn); + +#ifdef CONFIG_HIGHMEM +static void __init highmem_init(void) +{ + pr_debug("%x\n", (u32)PKMAP_BASE); + map_page(PKMAP_BASE, 0, 0); /* XXX gross */ + pkmap_page_table = virt_to_kpte(PKMAP_BASE); +} + +static void __meminit highmem_setup(void) +{ + unsigned long pfn; + + for (pfn = max_low_pfn; pfn < max_pfn; ++pfn) { + struct page *page = pfn_to_page(pfn); + + /* FIXME not sure about */ + if (!memblock_is_reserved(pfn << PAGE_SHIFT)) + free_highmem_page(page); + } +} +#endif /* CONFIG_HIGHMEM */ + +/* + * paging_init() sets up the page tables - in fact we've already done this. + */ +static void __init paging_init(void) +{ + unsigned long zones_size[MAX_NR_ZONES]; + int idx; + + /* Setup fixmaps */ + for (idx = 0; idx < __end_of_fixed_addresses; idx++) + clear_fixmap(idx); + + /* Clean every zones */ + memset(zones_size, 0, sizeof(zones_size)); + +#ifdef CONFIG_HIGHMEM + highmem_init(); + + zones_size[ZONE_DMA] = max_low_pfn; + zones_size[ZONE_HIGHMEM] = max_pfn; +#else + zones_size[ZONE_DMA] = max_pfn; +#endif + + /* We don't have holes in memory map */ + free_area_init(zones_size); +} + +void __init setup_memory(void) +{ + /* + * Kernel: + * start: base phys address of kernel - page align + * end: base phys address of kernel - page align + * + * min_low_pfn - the first page (mm/bootmem.c - node_boot_start) + * max_low_pfn + * max_mapnr - the first unused page (mm/bootmem.c - node_low_pfn) + */ + + /* memory start is from the kernel end (aligned) to higher addr */ + min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */ + /* RAM is assumed contiguous */ + max_mapnr = memory_size >> PAGE_SHIFT; + max_low_pfn = ((u64)memory_start + (u64)lowmem_size) >> PAGE_SHIFT; + max_pfn = ((u64)memory_start + (u64)memory_size) >> PAGE_SHIFT; + + pr_info("%s: max_mapnr: %#lx\n", __func__, max_mapnr); + pr_info("%s: min_low_pfn: %#lx\n", __func__, min_low_pfn); + pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn); + pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn); + + paging_init(); +} + +void __init mem_init(void) +{ + high_memory = (void *)__va(memory_start + lowmem_size - 1); + + /* this will put all memory onto the freelists */ + memblock_free_all(); +#ifdef CONFIG_HIGHMEM + highmem_setup(); +#endif + + mem_init_done = 1; +} + +int page_is_ram(unsigned long pfn) +{ + return pfn < max_low_pfn; +} + +/* + * Check for command-line options that affect what MMU_init will do. + */ +static void mm_cmdline_setup(void) +{ + unsigned long maxmem = 0; + char *p = cmd_line; + + /* Look for mem= option on command line */ + p = strstr(cmd_line, "mem="); + if (p) { + p += 4; + maxmem = memparse(p, &p); + if (maxmem && memory_size > maxmem) { + memory_size = maxmem; + memblock.memory.regions[0].size = memory_size; + } + } +} + +/* + * MMU_init_hw does the chip-specific initialization of the MMU hardware. + */ +static void __init mmu_init_hw(void) +{ + /* + * The Zone Protection Register (ZPR) defines how protection will + * be applied to every page which is a member of a given zone. At + * present, we utilize only two of the zones. + * The zone index bits (of ZSEL) in the PTE are used for software + * indicators, except the LSB. For user access, zone 1 is used, + * for kernel access, zone 0 is used. We set all but zone 1 + * to zero, allowing only kernel access as indicated in the PTE. + * For zone 1, we set a 01 binary (a value of 10 will not work) + * to allow user access as indicated in the PTE. This also allows + * kernel access as indicated in the PTE. + */ + __asm__ __volatile__ ("ori r11, r0, 0x10000000;" \ + "mts rzpr, r11;" + : : : "r11"); +} + +/* + * MMU_init sets up the basic memory mappings for the kernel, + * including both RAM and possibly some I/O regions, + * and sets up the page tables and the MMU hardware ready to go. + */ + +/* called from head.S */ +asmlinkage void __init mmu_init(void) +{ + unsigned int kstart, ksize; + + if (!memblock.reserved.cnt) { + pr_emerg("Error memory count\n"); + machine_restart(NULL); + } + + if ((u32) memblock.memory.regions[0].size < 0x400000) { + pr_emerg("Memory must be greater than 4MB\n"); + machine_restart(NULL); + } + + if ((u32) memblock.memory.regions[0].size < kernel_tlb) { + pr_emerg("Kernel size is greater than memory node\n"); + machine_restart(NULL); + } + + /* Find main memory where the kernel is */ + memory_start = (u32) memblock.memory.regions[0].base; + lowmem_size = memory_size = (u32) memblock.memory.regions[0].size; + + if (lowmem_size > CONFIG_LOWMEM_SIZE) { + lowmem_size = CONFIG_LOWMEM_SIZE; +#ifndef CONFIG_HIGHMEM + memory_size = lowmem_size; +#endif + } + + mm_cmdline_setup(); /* FIXME parse args from command line - not used */ + + /* + * Map out the kernel text/data/bss from the available physical + * memory. + */ + kstart = __pa(CONFIG_KERNEL_START); /* kernel start */ + /* kernel size */ + ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START)); + memblock_reserve(kstart, ksize); + +#if defined(CONFIG_BLK_DEV_INITRD) + /* Remove the init RAM disk from the available memory. */ + if (initrd_start) { + unsigned long size; + size = initrd_end - initrd_start; + memblock_reserve(__virt_to_phys(initrd_start), size); + } +#endif /* CONFIG_BLK_DEV_INITRD */ + + /* Initialize the MMU hardware */ + mmu_init_hw(); + + /* Map in all of RAM starting at CONFIG_KERNEL_START */ + mapin_ram(); + + /* Extend vmalloc and ioremap area as big as possible */ +#ifdef CONFIG_HIGHMEM + ioremap_base = ioremap_bot = PKMAP_BASE; +#else + ioremap_base = ioremap_bot = FIXADDR_START; +#endif + + /* Initialize the context management stuff */ + mmu_context_init(); + + /* Shortly after that, the entire linear mapping will be available */ + /* This will also cause that unflatten device tree will be allocated + * inside 768MB limit */ + memblock_set_current_limit(memory_start + lowmem_size - 1); + + parse_early_param(); + + early_init_fdt_scan_reserved_mem(); + + /* CMA initialization */ + dma_contiguous_reserve(memory_start + lowmem_size - 1); + + memblock_dump_all(); +} + +void * __ref zalloc_maybe_bootmem(size_t size, gfp_t mask) +{ + void *p; + + if (mem_init_done) { + p = kzalloc(size, mask); + } else { + p = memblock_alloc(size, SMP_CACHE_BYTES); + if (!p) + panic("%s: Failed to allocate %zu bytes\n", + __func__, size); + } + + return p; +} + +static const pgprot_t protection_map[16] = { + [VM_NONE] = PAGE_NONE, + [VM_READ] = PAGE_READONLY_X, + [VM_WRITE] = PAGE_COPY, + [VM_WRITE | VM_READ] = PAGE_COPY_X, + [VM_EXEC] = PAGE_READONLY, + [VM_EXEC | VM_READ] = PAGE_READONLY_X, + [VM_EXEC | VM_WRITE] = PAGE_COPY, + [VM_EXEC | VM_WRITE | VM_READ] = PAGE_COPY_X, + [VM_SHARED] = PAGE_NONE, + [VM_SHARED | VM_READ] = PAGE_READONLY_X, + [VM_SHARED | VM_WRITE] = PAGE_SHARED, + [VM_SHARED | VM_WRITE | VM_READ] = PAGE_SHARED_X, + [VM_SHARED | VM_EXEC] = PAGE_READONLY, + [VM_SHARED | VM_EXEC | VM_READ] = PAGE_READONLY_X, + [VM_SHARED | VM_EXEC | VM_WRITE] = PAGE_SHARED, + [VM_SHARED | VM_EXEC | VM_WRITE | VM_READ] = PAGE_SHARED_X +}; +DECLARE_VM_GET_PAGE_PROT |