summaryrefslogtreecommitdiffstats
path: root/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/cavium-octeon/executive/cvmx-helper-spi.c')
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper-spi.c202
1 files changed, 202 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
new file mode 100644
index 000000000..525914e9b
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
@@ -0,0 +1,202 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (C) 2003-2018 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * Functions for SPI initialization, configuration,
+ * and monitoring.
+ */
+#include <asm/octeon/octeon.h>
+
+#include <asm/octeon/cvmx-config.h>
+#include <asm/octeon/cvmx-spi.h>
+#include <asm/octeon/cvmx-helper.h>
+
+#include <asm/octeon/cvmx-pip-defs.h>
+#include <asm/octeon/cvmx-pko-defs.h>
+#include <asm/octeon/cvmx-spxx-defs.h>
+#include <asm/octeon/cvmx-stxx-defs.h>
+
+/*
+ * CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI
+ * initialization routines wait for SPI training. You can override the
+ * value using executive-config.h if necessary.
+ */
+#ifndef CVMX_HELPER_SPI_TIMEOUT
+#define CVMX_HELPER_SPI_TIMEOUT 10
+#endif
+
+int __cvmx_helper_spi_enumerate(int interface)
+{
+ if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
+ cvmx_spi4000_is_present(interface)) {
+ return 10;
+ } else {
+ return 16;
+ }
+}
+
+/**
+ * Probe a SPI interface and determine the number of ports
+ * connected to it. The SPI interface should still be down after
+ * this call.
+ *
+ * @interface: Interface to probe
+ *
+ * Returns Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_spi_probe(int interface)
+{
+ int num_ports = 0;
+
+ if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
+ cvmx_spi4000_is_present(interface)) {
+ num_ports = 10;
+ } else {
+ union cvmx_pko_reg_crc_enable enable;
+ num_ports = 16;
+ /*
+ * Unlike the SPI4000, most SPI devices don't
+ * automatically put on the L2 CRC. For everything
+ * except for the SPI4000 have PKO append the L2 CRC
+ * to the packet.
+ */
+ enable.u64 = cvmx_read_csr(CVMX_PKO_REG_CRC_ENABLE);
+ enable.s.enable |= 0xffff << (interface * 16);
+ cvmx_write_csr(CVMX_PKO_REG_CRC_ENABLE, enable.u64);
+ }
+ __cvmx_helper_setup_gmx(interface, num_ports);
+ return num_ports;
+}
+
+/**
+ * Bringup and enable a SPI interface. After this call packet I/O
+ * should be fully functional. This is called with IPD enabled but
+ * PKO disabled.
+ *
+ * @interface: Interface to bring up
+ *
+ * Returns Zero on success, negative on failure
+ */
+int __cvmx_helper_spi_enable(int interface)
+{
+ /*
+ * Normally the ethernet L2 CRC is checked and stripped in the
+ * GMX block. When you are using SPI, this isn' the case and
+ * IPD needs to check the L2 CRC.
+ */
+ int num_ports = cvmx_helper_ports_on_interface(interface);
+ int ipd_port;
+ for (ipd_port = interface * 16; ipd_port < interface * 16 + num_ports;
+ ipd_port++) {
+ union cvmx_pip_prt_cfgx port_config;
+ port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port));
+ port_config.s.crc_en = 1;
+ cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_config.u64);
+ }
+
+ if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) {
+ cvmx_spi_start_interface(interface, CVMX_SPI_MODE_DUPLEX,
+ CVMX_HELPER_SPI_TIMEOUT, num_ports);
+ if (cvmx_spi4000_is_present(interface))
+ cvmx_spi4000_initialize(interface);
+ }
+ __cvmx_interrupt_spxx_int_msk_enable(interface);
+ __cvmx_interrupt_stxx_int_msk_enable(interface);
+ __cvmx_interrupt_gmxx_enable(interface);
+ return 0;
+}
+
+/**
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @ipd_port: IPD/PKO port to query
+ *
+ * Returns Link state
+ */
+union cvmx_helper_link_info __cvmx_helper_spi_link_get(int ipd_port)
+{
+ union cvmx_helper_link_info result;
+ int interface = cvmx_helper_get_interface_num(ipd_port);
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+ result.u64 = 0;
+
+ if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) {
+ /* The simulator gives you a simulated full duplex link */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 10000;
+ } else if (cvmx_spi4000_is_present(interface)) {
+ union cvmx_gmxx_rxx_rx_inbnd inband =
+ cvmx_spi4000_check_speed(interface, index);
+ result.s.link_up = inband.s.status;
+ result.s.full_duplex = inband.s.duplex;
+ switch (inband.s.speed) {
+ case 0: /* 10 Mbps */
+ result.s.speed = 10;
+ break;
+ case 1: /* 100 Mbps */
+ result.s.speed = 100;
+ break;
+ case 2: /* 1 Gbps */
+ result.s.speed = 1000;
+ break;
+ case 3: /* Illegal */
+ result.s.speed = 0;
+ result.s.link_up = 0;
+ break;
+ }
+ } else {
+ /* For generic SPI we can't determine the link, just return some
+ sane results */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 10000;
+ }
+ return result;
+}
+
+/**
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get().
+ *
+ * @ipd_port: IPD/PKO port to configure
+ * @link_info: The new link state
+ *
+ * Returns Zero on success, negative on failure
+ */
+int __cvmx_helper_spi_link_set(int ipd_port, union cvmx_helper_link_info link_info)
+{
+ /* Nothing to do. If we have a SPI4000 then the setup was already performed
+ by cvmx_spi4000_check_speed(). If not then there isn't any link
+ info */
+ return 0;
+}