summaryrefslogtreecommitdiffstats
path: root/arch/mips/lib
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/lib')
-rw-r--r--arch/mips/lib/Makefile18
-rw-r--r--arch/mips/lib/bitops.c148
-rw-r--r--arch/mips/lib/bswapdi.c13
-rw-r--r--arch/mips/lib/bswapsi.c13
-rw-r--r--arch/mips/lib/csum_partial.S754
-rw-r--r--arch/mips/lib/delay.c68
-rw-r--r--arch/mips/lib/dump_tlb.c191
-rw-r--r--arch/mips/lib/iomap-pci.c46
-rw-r--r--arch/mips/lib/iomap_copy.c29
-rw-r--r--arch/mips/lib/libgcc.h43
-rw-r--r--arch/mips/lib/memcpy.S704
-rw-r--r--arch/mips/lib/memset.S325
-rw-r--r--arch/mips/lib/mips-atomic.c113
-rw-r--r--arch/mips/lib/multi3.c54
-rw-r--r--arch/mips/lib/r3k_dump_tlb.c71
-rw-r--r--arch/mips/lib/strncpy_user.S65
-rw-r--r--arch/mips/lib/strnlen_user.S64
-rw-r--r--arch/mips/lib/uncached.c82
18 files changed, 2801 insertions, 0 deletions
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
new file mode 100644
index 000000000..5d5b993cb
--- /dev/null
+++ b/arch/mips/lib/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for MIPS-specific library files..
+#
+
+lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \
+ mips-atomic.o strncpy_user.o \
+ strnlen_user.o uncached.o
+
+obj-y += iomap_copy.o
+obj-$(CONFIG_PCI) += iomap-pci.o
+lib-$(CONFIG_GENERIC_CSUM) := $(filter-out csum_partial.o, $(lib-y))
+
+obj-$(CONFIG_CPU_GENERIC_DUMP_TLB) += dump_tlb.o
+obj-$(CONFIG_CPU_R3000) += r3k_dump_tlb.o
+
+# libgcc-style stuff needed in the kernel
+obj-y += bswapsi.o bswapdi.o multi3.o
diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c
new file mode 100644
index 000000000..116d0bd8b
--- /dev/null
+++ b/arch/mips/lib/bitops.c
@@ -0,0 +1,148 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994-1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (c) 1999, 2000 Silicon Graphics, Inc.
+ */
+#include <linux/bitops.h>
+#include <linux/bits.h>
+#include <linux/irqflags.h>
+#include <linux/export.h>
+
+
+/**
+ * __mips_set_bit - Atomically set a bit in memory. This is called by
+ * set_bit() if it cannot find a faster solution.
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = &addr[BIT_WORD(nr)];
+ unsigned int bit = nr % BITS_PER_LONG;
+ unsigned long mask;
+ unsigned long flags;
+
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_set_bit);
+
+
+/**
+ * __mips_clear_bit - Clears a bit in memory. This is called by clear_bit() if
+ * it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ */
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = &addr[BIT_WORD(nr)];
+ unsigned int bit = nr % BITS_PER_LONG;
+ unsigned long mask;
+ unsigned long flags;
+
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a &= ~mask;
+ raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_clear_bit);
+
+
+/**
+ * __mips_change_bit - Toggle a bit in memory. This is called by change_bit()
+ * if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ */
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = &addr[BIT_WORD(nr)];
+ unsigned int bit = nr % BITS_PER_LONG;
+ unsigned long mask;
+ unsigned long flags;
+
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a ^= mask;
+ raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_change_bit);
+
+
+/**
+ * __mips_test_and_set_bit_lock - Set a bit and return its old value. This is
+ * called by test_and_set_bit_lock() if it cannot find a faster solution.
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+int __mips_test_and_set_bit_lock(unsigned long nr,
+ volatile unsigned long *addr)
+{
+ volatile unsigned long *a = &addr[BIT_WORD(nr)];
+ unsigned int bit = nr % BITS_PER_LONG;
+ unsigned long mask;
+ unsigned long flags;
+ int res;
+
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a) != 0;
+ *a |= mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_set_bit_lock);
+
+
+/**
+ * __mips_test_and_clear_bit - Clear a bit and return its old value. This is
+ * called by test_and_clear_bit() if it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ */
+int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = &addr[BIT_WORD(nr)];
+ unsigned int bit = nr % BITS_PER_LONG;
+ unsigned long mask;
+ unsigned long flags;
+ int res;
+
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a) != 0;
+ *a &= ~mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_clear_bit);
+
+
+/**
+ * __mips_test_and_change_bit - Change a bit and return its old value. This is
+ * called by test_and_change_bit() if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to count from
+ */
+int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = &addr[BIT_WORD(nr)];
+ unsigned int bit = nr % BITS_PER_LONG;
+ unsigned long mask;
+ unsigned long flags;
+ int res;
+
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a) != 0;
+ *a ^= mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_change_bit);
diff --git a/arch/mips/lib/bswapdi.c b/arch/mips/lib/bswapdi.c
new file mode 100644
index 000000000..88242dc7d
--- /dev/null
+++ b/arch/mips/lib/bswapdi.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+#include <linux/compiler.h>
+#include <uapi/linux/swab.h>
+
+/* To silence -Wmissing-prototypes. */
+unsigned long long __bswapdi2(unsigned long long u);
+
+unsigned long long notrace __bswapdi2(unsigned long long u)
+{
+ return ___constant_swab64(u);
+}
+EXPORT_SYMBOL(__bswapdi2);
diff --git a/arch/mips/lib/bswapsi.c b/arch/mips/lib/bswapsi.c
new file mode 100644
index 000000000..2ed655497
--- /dev/null
+++ b/arch/mips/lib/bswapsi.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+#include <linux/compiler.h>
+#include <uapi/linux/swab.h>
+
+/* To silence -Wmissing-prototypes. */
+unsigned int __bswapsi2(unsigned int u);
+
+unsigned int notrace __bswapsi2(unsigned int u)
+{
+ return ___constant_swab32(u);
+}
+EXPORT_SYMBOL(__bswapsi2);
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
new file mode 100644
index 000000000..7767137c3
--- /dev/null
+++ b/arch/mips/lib/csum_partial.S
@@ -0,0 +1,754 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Quick'n'dirty IP checksum ...
+ *
+ * Copyright (C) 1998, 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2007 Maciej W. Rozycki
+ * Copyright (C) 2014 Imagination Technologies Ltd.
+ */
+#include <linux/errno.h>
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/export.h>
+#include <asm/regdef.h>
+
+#ifdef CONFIG_64BIT
+/*
+ * As we are sharing code base with the mips32 tree (which use the o32 ABI
+ * register definitions). We need to redefine the register definitions from
+ * the n64 ABI register naming to the o32 ABI register naming.
+ */
+#undef t0
+#undef t1
+#undef t2
+#undef t3
+#define t0 $8
+#define t1 $9
+#define t2 $10
+#define t3 $11
+#define t4 $12
+#define t5 $13
+#define t6 $14
+#define t7 $15
+
+#define USE_DOUBLE
+#endif
+
+#ifdef USE_DOUBLE
+
+#define LOAD ld
+#define LOAD32 lwu
+#define ADD daddu
+#define NBYTES 8
+
+#else
+
+#define LOAD lw
+#define LOAD32 lw
+#define ADD addu
+#define NBYTES 4
+
+#endif /* USE_DOUBLE */
+
+#define UNIT(unit) ((unit)*NBYTES)
+
+#define ADDC(sum,reg) \
+ .set push; \
+ .set noat; \
+ ADD sum, reg; \
+ sltu v1, sum, reg; \
+ ADD sum, v1; \
+ .set pop
+
+#define ADDC32(sum,reg) \
+ .set push; \
+ .set noat; \
+ addu sum, reg; \
+ sltu v1, sum, reg; \
+ addu sum, v1; \
+ .set pop
+
+#define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \
+ LOAD _t0, (offset + UNIT(0))(src); \
+ LOAD _t1, (offset + UNIT(1))(src); \
+ LOAD _t2, (offset + UNIT(2))(src); \
+ LOAD _t3, (offset + UNIT(3))(src); \
+ ADDC(_t0, _t1); \
+ ADDC(_t2, _t3); \
+ ADDC(sum, _t0); \
+ ADDC(sum, _t2)
+
+#ifdef USE_DOUBLE
+#define CSUM_BIGCHUNK(src, offset, sum, _t0, _t1, _t2, _t3) \
+ CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3)
+#else
+#define CSUM_BIGCHUNK(src, offset, sum, _t0, _t1, _t2, _t3) \
+ CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3); \
+ CSUM_BIGCHUNK1(src, offset + 0x10, sum, _t0, _t1, _t2, _t3)
+#endif
+
+/*
+ * a0: source address
+ * a1: length of the area to checksum
+ * a2: partial checksum
+ */
+
+#define src a0
+#define sum v0
+
+ .text
+ .set noreorder
+ .align 5
+LEAF(csum_partial)
+EXPORT_SYMBOL(csum_partial)
+ move sum, zero
+ move t7, zero
+
+ sltiu t8, a1, 0x8
+ bnez t8, .Lsmall_csumcpy /* < 8 bytes to copy */
+ move t2, a1
+
+ andi t7, src, 0x1 /* odd buffer? */
+
+.Lhword_align:
+ beqz t7, .Lword_align
+ andi t8, src, 0x2
+
+ lbu t0, (src)
+ LONG_SUBU a1, a1, 0x1
+#ifdef __MIPSEL__
+ sll t0, t0, 8
+#endif
+ ADDC(sum, t0)
+ PTR_ADDU src, src, 0x1
+ andi t8, src, 0x2
+
+.Lword_align:
+ beqz t8, .Ldword_align
+ sltiu t8, a1, 56
+
+ lhu t0, (src)
+ LONG_SUBU a1, a1, 0x2
+ ADDC(sum, t0)
+ sltiu t8, a1, 56
+ PTR_ADDU src, src, 0x2
+
+.Ldword_align:
+ bnez t8, .Ldo_end_words
+ move t8, a1
+
+ andi t8, src, 0x4
+ beqz t8, .Lqword_align
+ andi t8, src, 0x8
+
+ LOAD32 t0, 0x00(src)
+ LONG_SUBU a1, a1, 0x4
+ ADDC(sum, t0)
+ PTR_ADDU src, src, 0x4
+ andi t8, src, 0x8
+
+.Lqword_align:
+ beqz t8, .Loword_align
+ andi t8, src, 0x10
+
+#ifdef USE_DOUBLE
+ ld t0, 0x00(src)
+ LONG_SUBU a1, a1, 0x8
+ ADDC(sum, t0)
+#else
+ lw t0, 0x00(src)
+ lw t1, 0x04(src)
+ LONG_SUBU a1, a1, 0x8
+ ADDC(sum, t0)
+ ADDC(sum, t1)
+#endif
+ PTR_ADDU src, src, 0x8
+ andi t8, src, 0x10
+
+.Loword_align:
+ beqz t8, .Lbegin_movement
+ LONG_SRL t8, a1, 0x7
+
+#ifdef USE_DOUBLE
+ ld t0, 0x00(src)
+ ld t1, 0x08(src)
+ ADDC(sum, t0)
+ ADDC(sum, t1)
+#else
+ CSUM_BIGCHUNK1(src, 0x00, sum, t0, t1, t3, t4)
+#endif
+ LONG_SUBU a1, a1, 0x10
+ PTR_ADDU src, src, 0x10
+ LONG_SRL t8, a1, 0x7
+
+.Lbegin_movement:
+ beqz t8, 1f
+ andi t2, a1, 0x40
+
+.Lmove_128bytes:
+ CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4)
+ CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4)
+ CSUM_BIGCHUNK(src, 0x40, sum, t0, t1, t3, t4)
+ CSUM_BIGCHUNK(src, 0x60, sum, t0, t1, t3, t4)
+ LONG_SUBU t8, t8, 0x01
+ .set reorder /* DADDI_WAR */
+ PTR_ADDU src, src, 0x80
+ bnez t8, .Lmove_128bytes
+ .set noreorder
+
+1:
+ beqz t2, 1f
+ andi t2, a1, 0x20
+
+.Lmove_64bytes:
+ CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4)
+ CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4)
+ PTR_ADDU src, src, 0x40
+
+1:
+ beqz t2, .Ldo_end_words
+ andi t8, a1, 0x1c
+
+.Lmove_32bytes:
+ CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4)
+ andi t8, a1, 0x1c
+ PTR_ADDU src, src, 0x20
+
+.Ldo_end_words:
+ beqz t8, .Lsmall_csumcpy
+ andi t2, a1, 0x3
+ LONG_SRL t8, t8, 0x2
+
+.Lend_words:
+ LOAD32 t0, (src)
+ LONG_SUBU t8, t8, 0x1
+ ADDC(sum, t0)
+ .set reorder /* DADDI_WAR */
+ PTR_ADDU src, src, 0x4
+ bnez t8, .Lend_words
+ .set noreorder
+
+/* unknown src alignment and < 8 bytes to go */
+.Lsmall_csumcpy:
+ move a1, t2
+
+ andi t0, a1, 4
+ beqz t0, 1f
+ andi t0, a1, 2
+
+ /* Still a full word to go */
+ ulw t1, (src)
+ PTR_ADDIU src, 4
+#ifdef USE_DOUBLE
+ dsll t1, t1, 32 /* clear lower 32bit */
+#endif
+ ADDC(sum, t1)
+
+1: move t1, zero
+ beqz t0, 1f
+ andi t0, a1, 1
+
+ /* Still a halfword to go */
+ ulhu t1, (src)
+ PTR_ADDIU src, 2
+
+1: beqz t0, 1f
+ sll t1, t1, 16
+
+ lbu t2, (src)
+ nop
+
+#ifdef __MIPSEB__
+ sll t2, t2, 8
+#endif
+ or t1, t2
+
+1: ADDC(sum, t1)
+
+ /* fold checksum */
+#ifdef USE_DOUBLE
+ dsll32 v1, sum, 0
+ daddu sum, v1
+ sltu v1, sum, v1
+ dsra32 sum, sum, 0
+ addu sum, v1
+#endif
+
+ /* odd buffer alignment? */
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_LOONGSON64)
+ .set push
+ .set arch=mips32r2
+ wsbh v1, sum
+ movn sum, v1, t7
+ .set pop
+#else
+ beqz t7, 1f /* odd buffer alignment? */
+ lui v1, 0x00ff
+ addu v1, 0x00ff
+ and t0, sum, v1
+ sll t0, t0, 8
+ srl sum, sum, 8
+ and sum, sum, v1
+ or sum, sum, t0
+1:
+#endif
+ .set reorder
+ /* Add the passed partial csum. */
+ ADDC32(sum, a2)
+ jr ra
+ .set noreorder
+ END(csum_partial)
+
+
+/*
+ * checksum and copy routines based on memcpy.S
+ *
+ * csum_partial_copy_nocheck(src, dst, len)
+ * __csum_partial_copy_kernel(src, dst, len)
+ *
+ * See "Spec" in memcpy.S for details. Unlike __copy_user, all
+ * function in this file use the standard calling convention.
+ */
+
+#define src a0
+#define dst a1
+#define len a2
+#define sum v0
+#define odd t8
+
+/*
+ * All exception handlers simply return 0.
+ */
+
+/* Instruction type */
+#define LD_INSN 1
+#define ST_INSN 2
+#define LEGACY_MODE 1
+#define EVA_MODE 2
+#define USEROP 1
+#define KERNELOP 2
+
+/*
+ * Wrapper to add an entry in the exception table
+ * in case the insn causes a memory exception.
+ * Arguments:
+ * insn : Load/store instruction
+ * type : Instruction type
+ * reg : Register
+ * addr : Address
+ * handler : Exception handler
+ */
+#define EXC(insn, type, reg, addr) \
+ .if \mode == LEGACY_MODE; \
+9: insn reg, addr; \
+ .section __ex_table,"a"; \
+ PTR_WD 9b, .L_exc; \
+ .previous; \
+ /* This is enabled in EVA mode */ \
+ .else; \
+ /* If loading from user or storing to user */ \
+ .if ((\from == USEROP) && (type == LD_INSN)) || \
+ ((\to == USEROP) && (type == ST_INSN)); \
+9: __BUILD_EVA_INSN(insn##e, reg, addr); \
+ .section __ex_table,"a"; \
+ PTR_WD 9b, .L_exc; \
+ .previous; \
+ .else; \
+ /* EVA without exception */ \
+ insn reg, addr; \
+ .endif; \
+ .endif
+
+#undef LOAD
+
+#ifdef USE_DOUBLE
+
+#define LOADK ld /* No exception */
+#define LOAD(reg, addr) EXC(ld, LD_INSN, reg, addr)
+#define LOADBU(reg, addr) EXC(lbu, LD_INSN, reg, addr)
+#define LOADL(reg, addr) EXC(ldl, LD_INSN, reg, addr)
+#define LOADR(reg, addr) EXC(ldr, LD_INSN, reg, addr)
+#define STOREB(reg, addr) EXC(sb, ST_INSN, reg, addr)
+#define STOREL(reg, addr) EXC(sdl, ST_INSN, reg, addr)
+#define STORER(reg, addr) EXC(sdr, ST_INSN, reg, addr)
+#define STORE(reg, addr) EXC(sd, ST_INSN, reg, addr)
+#define ADD daddu
+#define SUB dsubu
+#define SRL dsrl
+#define SLL dsll
+#define SLLV dsllv
+#define SRLV dsrlv
+#define NBYTES 8
+#define LOG_NBYTES 3
+
+#else
+
+#define LOADK lw /* No exception */
+#define LOAD(reg, addr) EXC(lw, LD_INSN, reg, addr)
+#define LOADBU(reg, addr) EXC(lbu, LD_INSN, reg, addr)
+#define LOADL(reg, addr) EXC(lwl, LD_INSN, reg, addr)
+#define LOADR(reg, addr) EXC(lwr, LD_INSN, reg, addr)
+#define STOREB(reg, addr) EXC(sb, ST_INSN, reg, addr)
+#define STOREL(reg, addr) EXC(swl, ST_INSN, reg, addr)
+#define STORER(reg, addr) EXC(swr, ST_INSN, reg, addr)
+#define STORE(reg, addr) EXC(sw, ST_INSN, reg, addr)
+#define ADD addu
+#define SUB subu
+#define SRL srl
+#define SLL sll
+#define SLLV sllv
+#define SRLV srlv
+#define NBYTES 4
+#define LOG_NBYTES 2
+
+#endif /* USE_DOUBLE */
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define LDFIRST LOADR
+#define LDREST LOADL
+#define STFIRST STORER
+#define STREST STOREL
+#define SHIFT_DISCARD SLLV
+#define SHIFT_DISCARD_REVERT SRLV
+#else
+#define LDFIRST LOADL
+#define LDREST LOADR
+#define STFIRST STOREL
+#define STREST STORER
+#define SHIFT_DISCARD SRLV
+#define SHIFT_DISCARD_REVERT SLLV
+#endif
+
+#define FIRST(unit) ((unit)*NBYTES)
+#define REST(unit) (FIRST(unit)+NBYTES-1)
+
+#define ADDRMASK (NBYTES-1)
+
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+ .set noat
+#else
+ .set at=v1
+#endif
+
+ .macro __BUILD_CSUM_PARTIAL_COPY_USER mode, from, to
+
+ li sum, -1
+ move odd, zero
+ /*
+ * Note: dst & src may be unaligned, len may be 0
+ * Temps
+ */
+ /*
+ * The "issue break"s below are very approximate.
+ * Issue delays for dcache fills will perturb the schedule, as will
+ * load queue full replay traps, etc.
+ *
+ * If len < NBYTES use byte operations.
+ */
+ sltu t2, len, NBYTES
+ and t1, dst, ADDRMASK
+ bnez t2, .Lcopy_bytes_checklen\@
+ and t0, src, ADDRMASK
+ andi odd, dst, 0x1 /* odd buffer? */
+ bnez t1, .Ldst_unaligned\@
+ nop
+ bnez t0, .Lsrc_unaligned_dst_aligned\@
+ /*
+ * use delay slot for fall-through
+ * src and dst are aligned; need to compute rem
+ */
+.Lboth_aligned\@:
+ SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter
+ beqz t0, .Lcleanup_both_aligned\@ # len < 8*NBYTES
+ nop
+ SUB len, 8*NBYTES # subtract here for bgez loop
+ .align 4
+1:
+ LOAD(t0, UNIT(0)(src))
+ LOAD(t1, UNIT(1)(src))
+ LOAD(t2, UNIT(2)(src))
+ LOAD(t3, UNIT(3)(src))
+ LOAD(t4, UNIT(4)(src))
+ LOAD(t5, UNIT(5)(src))
+ LOAD(t6, UNIT(6)(src))
+ LOAD(t7, UNIT(7)(src))
+ SUB len, len, 8*NBYTES
+ ADD src, src, 8*NBYTES
+ STORE(t0, UNIT(0)(dst))
+ ADDC(t0, t1)
+ STORE(t1, UNIT(1)(dst))
+ ADDC(sum, t0)
+ STORE(t2, UNIT(2)(dst))
+ ADDC(t2, t3)
+ STORE(t3, UNIT(3)(dst))
+ ADDC(sum, t2)
+ STORE(t4, UNIT(4)(dst))
+ ADDC(t4, t5)
+ STORE(t5, UNIT(5)(dst))
+ ADDC(sum, t4)
+ STORE(t6, UNIT(6)(dst))
+ ADDC(t6, t7)
+ STORE(t7, UNIT(7)(dst))
+ ADDC(sum, t6)
+ .set reorder /* DADDI_WAR */
+ ADD dst, dst, 8*NBYTES
+ bgez len, 1b
+ .set noreorder
+ ADD len, 8*NBYTES # revert len (see above)
+
+ /*
+ * len == the number of bytes left to copy < 8*NBYTES
+ */
+.Lcleanup_both_aligned\@:
+#define rem t7
+ beqz len, .Ldone\@
+ sltu t0, len, 4*NBYTES
+ bnez t0, .Lless_than_4units\@
+ and rem, len, (NBYTES-1) # rem = len % NBYTES
+ /*
+ * len >= 4*NBYTES
+ */
+ LOAD(t0, UNIT(0)(src))
+ LOAD(t1, UNIT(1)(src))
+ LOAD(t2, UNIT(2)(src))
+ LOAD(t3, UNIT(3)(src))
+ SUB len, len, 4*NBYTES
+ ADD src, src, 4*NBYTES
+ STORE(t0, UNIT(0)(dst))
+ ADDC(t0, t1)
+ STORE(t1, UNIT(1)(dst))
+ ADDC(sum, t0)
+ STORE(t2, UNIT(2)(dst))
+ ADDC(t2, t3)
+ STORE(t3, UNIT(3)(dst))
+ ADDC(sum, t2)
+ .set reorder /* DADDI_WAR */
+ ADD dst, dst, 4*NBYTES
+ beqz len, .Ldone\@
+ .set noreorder
+.Lless_than_4units\@:
+ /*
+ * rem = len % NBYTES
+ */
+ beq rem, len, .Lcopy_bytes\@
+ nop
+1:
+ LOAD(t0, 0(src))
+ ADD src, src, NBYTES
+ SUB len, len, NBYTES
+ STORE(t0, 0(dst))
+ ADDC(sum, t0)
+ .set reorder /* DADDI_WAR */
+ ADD dst, dst, NBYTES
+ bne rem, len, 1b
+ .set noreorder
+
+ /*
+ * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
+ * A loop would do only a byte at a time with possible branch
+ * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE
+ * because can't assume read-access to dst. Instead, use
+ * STREST dst, which doesn't require read access to dst.
+ *
+ * This code should perform better than a simple loop on modern,
+ * wide-issue mips processors because the code has fewer branches and
+ * more instruction-level parallelism.
+ */
+#define bits t2
+ beqz len, .Ldone\@
+ ADD t1, dst, len # t1 is just past last byte of dst
+ li bits, 8*NBYTES
+ SLL rem, len, 3 # rem = number of bits to keep
+ LOAD(t0, 0(src))
+ SUB bits, bits, rem # bits = number of bits to discard
+ SHIFT_DISCARD t0, t0, bits
+ STREST(t0, -1(t1))
+ SHIFT_DISCARD_REVERT t0, t0, bits
+ .set reorder
+ ADDC(sum, t0)
+ b .Ldone\@
+ .set noreorder
+.Ldst_unaligned\@:
+ /*
+ * dst is unaligned
+ * t0 = src & ADDRMASK
+ * t1 = dst & ADDRMASK; T1 > 0
+ * len >= NBYTES
+ *
+ * Copy enough bytes to align dst
+ * Set match = (src and dst have same alignment)
+ */
+#define match rem
+ LDFIRST(t3, FIRST(0)(src))
+ ADD t2, zero, NBYTES
+ LDREST(t3, REST(0)(src))
+ SUB t2, t2, t1 # t2 = number of bytes copied
+ xor match, t0, t1
+ STFIRST(t3, FIRST(0)(dst))
+ SLL t4, t1, 3 # t4 = number of bits to discard
+ SHIFT_DISCARD t3, t3, t4
+ /* no SHIFT_DISCARD_REVERT to handle odd buffer properly */
+ ADDC(sum, t3)
+ beq len, t2, .Ldone\@
+ SUB len, len, t2
+ ADD dst, dst, t2
+ beqz match, .Lboth_aligned\@
+ ADD src, src, t2
+
+.Lsrc_unaligned_dst_aligned\@:
+ SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter
+ beqz t0, .Lcleanup_src_unaligned\@
+ and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES
+1:
+/*
+ * Avoid consecutive LD*'s to the same register since some mips
+ * implementations can't issue them in the same cycle.
+ * It's OK to load FIRST(N+1) before REST(N) because the two addresses
+ * are to the same unit (unless src is aligned, but it's not).
+ */
+ LDFIRST(t0, FIRST(0)(src))
+ LDFIRST(t1, FIRST(1)(src))
+ SUB len, len, 4*NBYTES
+ LDREST(t0, REST(0)(src))
+ LDREST(t1, REST(1)(src))
+ LDFIRST(t2, FIRST(2)(src))
+ LDFIRST(t3, FIRST(3)(src))
+ LDREST(t2, REST(2)(src))
+ LDREST(t3, REST(3)(src))
+ ADD src, src, 4*NBYTES
+#ifdef CONFIG_CPU_SB1
+ nop # improves slotting
+#endif
+ STORE(t0, UNIT(0)(dst))
+ ADDC(t0, t1)
+ STORE(t1, UNIT(1)(dst))
+ ADDC(sum, t0)
+ STORE(t2, UNIT(2)(dst))
+ ADDC(t2, t3)
+ STORE(t3, UNIT(3)(dst))
+ ADDC(sum, t2)
+ .set reorder /* DADDI_WAR */
+ ADD dst, dst, 4*NBYTES
+ bne len, rem, 1b
+ .set noreorder
+
+.Lcleanup_src_unaligned\@:
+ beqz len, .Ldone\@
+ and rem, len, NBYTES-1 # rem = len % NBYTES
+ beq rem, len, .Lcopy_bytes\@
+ nop
+1:
+ LDFIRST(t0, FIRST(0)(src))
+ LDREST(t0, REST(0)(src))
+ ADD src, src, NBYTES
+ SUB len, len, NBYTES
+ STORE(t0, 0(dst))
+ ADDC(sum, t0)
+ .set reorder /* DADDI_WAR */
+ ADD dst, dst, NBYTES
+ bne len, rem, 1b
+ .set noreorder
+
+.Lcopy_bytes_checklen\@:
+ beqz len, .Ldone\@
+ nop
+.Lcopy_bytes\@:
+ /* 0 < len < NBYTES */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define SHIFT_START 0
+#define SHIFT_INC 8
+#else
+#define SHIFT_START 8*(NBYTES-1)
+#define SHIFT_INC -8
+#endif
+ move t2, zero # partial word
+ li t3, SHIFT_START # shift
+#define COPY_BYTE(N) \
+ LOADBU(t0, N(src)); \
+ SUB len, len, 1; \
+ STOREB(t0, N(dst)); \
+ SLLV t0, t0, t3; \
+ addu t3, SHIFT_INC; \
+ beqz len, .Lcopy_bytes_done\@; \
+ or t2, t0
+
+ COPY_BYTE(0)
+ COPY_BYTE(1)
+#ifdef USE_DOUBLE
+ COPY_BYTE(2)
+ COPY_BYTE(3)
+ COPY_BYTE(4)
+ COPY_BYTE(5)
+#endif
+ LOADBU(t0, NBYTES-2(src))
+ SUB len, len, 1
+ STOREB(t0, NBYTES-2(dst))
+ SLLV t0, t0, t3
+ or t2, t0
+.Lcopy_bytes_done\@:
+ ADDC(sum, t2)
+.Ldone\@:
+ /* fold checksum */
+ .set push
+ .set noat
+#ifdef USE_DOUBLE
+ dsll32 v1, sum, 0
+ daddu sum, v1
+ sltu v1, sum, v1
+ dsra32 sum, sum, 0
+ addu sum, v1
+#endif
+
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_LOONGSON64)
+ .set push
+ .set arch=mips32r2
+ wsbh v1, sum
+ movn sum, v1, odd
+ .set pop
+#else
+ beqz odd, 1f /* odd buffer alignment? */
+ lui v1, 0x00ff
+ addu v1, 0x00ff
+ and t0, sum, v1
+ sll t0, t0, 8
+ srl sum, sum, 8
+ and sum, sum, v1
+ or sum, sum, t0
+1:
+#endif
+ .set pop
+ .set reorder
+ jr ra
+ .set noreorder
+ .endm
+
+ .set noreorder
+.L_exc:
+ jr ra
+ li v0, 0
+
+FEXPORT(__csum_partial_copy_nocheck)
+EXPORT_SYMBOL(__csum_partial_copy_nocheck)
+#ifndef CONFIG_EVA
+FEXPORT(__csum_partial_copy_to_user)
+EXPORT_SYMBOL(__csum_partial_copy_to_user)
+FEXPORT(__csum_partial_copy_from_user)
+EXPORT_SYMBOL(__csum_partial_copy_from_user)
+#endif
+__BUILD_CSUM_PARTIAL_COPY_USER LEGACY_MODE USEROP USEROP
+
+#ifdef CONFIG_EVA
+LEAF(__csum_partial_copy_to_user)
+__BUILD_CSUM_PARTIAL_COPY_USER EVA_MODE KERNELOP USEROP
+END(__csum_partial_copy_to_user)
+
+LEAF(__csum_partial_copy_from_user)
+__BUILD_CSUM_PARTIAL_COPY_USER EVA_MODE USEROP KERNELOP
+END(__csum_partial_copy_from_user)
+#endif
diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c
new file mode 100644
index 000000000..ccdb1fc1e
--- /dev/null
+++ b/arch/mips/lib/delay.c
@@ -0,0 +1,68 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007, 2014 Maciej W. Rozycki
+ */
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/param.h>
+#include <linux/smp.h>
+#include <linux/stringify.h>
+
+#include <asm/asm.h>
+#include <asm/compiler.h>
+
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+#define GCC_DADDI_IMM_ASM() "I"
+#else
+#define GCC_DADDI_IMM_ASM() "r"
+#endif
+
+#ifndef CONFIG_HAVE_PLAT_DELAY
+
+void __delay(unsigned long loops)
+{
+ __asm__ __volatile__ (
+ " .set noreorder \n"
+ " .align 3 \n"
+ "1: bnez %0, 1b \n"
+ " " __stringify(LONG_SUBU) " %0, %1 \n"
+ " .set reorder \n"
+ : "=r" (loops)
+ : GCC_DADDI_IMM_ASM() (1), "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+void __udelay(unsigned long us)
+{
+ unsigned int lpj = raw_current_cpu_data.udelay_val;
+
+ __delay((us * 0x000010c7ull * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long ns)
+{
+ unsigned int lpj = raw_current_cpu_data.udelay_val;
+
+ __delay((ns * 0x00000005ull * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__ndelay);
+
+#endif
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
new file mode 100644
index 000000000..8ce97b874
--- /dev/null
+++ b/arch/mips/lib/dump_tlb.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Dump R4x00 TLB for debugging purposes.
+ *
+ * Copyright (C) 1994, 1995 by Waldorf Electronics, written by Ralf Baechle.
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+#include <asm/hazards.h>
+#include <asm/mipsregs.h>
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+#include <asm/tlbdebug.h>
+
+void dump_tlb_regs(void)
+{
+ const int field = 2 * sizeof(unsigned long);
+
+ pr_info("Index : %0x\n", read_c0_index());
+ pr_info("PageMask : %0x\n", read_c0_pagemask());
+ if (cpu_has_guestid)
+ pr_info("GuestCtl1: %0x\n", read_c0_guestctl1());
+ pr_info("EntryHi : %0*lx\n", field, read_c0_entryhi());
+ pr_info("EntryLo0 : %0*lx\n", field, read_c0_entrylo0());
+ pr_info("EntryLo1 : %0*lx\n", field, read_c0_entrylo1());
+ pr_info("Wired : %0x\n", read_c0_wired());
+ switch (current_cpu_type()) {
+ case CPU_R10000:
+ case CPU_R12000:
+ case CPU_R14000:
+ case CPU_R16000:
+ pr_info("FrameMask: %0x\n", read_c0_framemask());
+ break;
+ }
+ if (cpu_has_small_pages || cpu_has_rixi || cpu_has_xpa)
+ pr_info("PageGrain: %0x\n", read_c0_pagegrain());
+ if (cpu_has_htw) {
+ pr_info("PWField : %0*lx\n", field, read_c0_pwfield());
+ pr_info("PWSize : %0*lx\n", field, read_c0_pwsize());
+ pr_info("PWCtl : %0x\n", read_c0_pwctl());
+ }
+}
+
+static inline const char *msk2str(unsigned int mask)
+{
+ switch (mask) {
+ case PM_4K: return "4kb";
+ case PM_16K: return "16kb";
+ case PM_64K: return "64kb";
+ case PM_256K: return "256kb";
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+ case PM_8K: return "8kb";
+ case PM_32K: return "32kb";
+ case PM_128K: return "128kb";
+ case PM_512K: return "512kb";
+ case PM_2M: return "2Mb";
+ case PM_8M: return "8Mb";
+ case PM_32M: return "32Mb";
+#endif
+ }
+ return "";
+}
+
+static void dump_tlb(int first, int last)
+{
+ unsigned long s_entryhi, entryhi, asid, mmid;
+ unsigned long long entrylo0, entrylo1, pa;
+ unsigned int s_index, s_pagemask, s_guestctl1 = 0;
+ unsigned int pagemask, guestctl1 = 0, c0, c1, i;
+ unsigned long asidmask = cpu_asid_mask(&current_cpu_data);
+ int asidwidth = DIV_ROUND_UP(ilog2(asidmask) + 1, 4);
+ unsigned long s_mmid;
+#ifdef CONFIG_32BIT
+ bool xpa = cpu_has_xpa && (read_c0_pagegrain() & PG_ELPA);
+ int pwidth = xpa ? 11 : 8;
+ int vwidth = 8;
+#else
+ bool xpa = false;
+ int pwidth = 11;
+ int vwidth = 11;
+#endif
+
+ s_pagemask = read_c0_pagemask();
+ s_entryhi = read_c0_entryhi();
+ s_index = read_c0_index();
+
+ if (cpu_has_mmid)
+ asid = s_mmid = read_c0_memorymapid();
+ else
+ asid = s_entryhi & asidmask;
+
+ if (cpu_has_guestid)
+ s_guestctl1 = read_c0_guestctl1();
+
+ for (i = first; i <= last; i++) {
+ write_c0_index(i);
+ mtc0_tlbr_hazard();
+ tlb_read();
+ tlb_read_hazard();
+ pagemask = read_c0_pagemask();
+ entryhi = read_c0_entryhi();
+ entrylo0 = read_c0_entrylo0();
+ entrylo1 = read_c0_entrylo1();
+
+ if (cpu_has_mmid)
+ mmid = read_c0_memorymapid();
+ else
+ mmid = entryhi & asidmask;
+
+ if (cpu_has_guestid)
+ guestctl1 = read_c0_guestctl1();
+
+ /* EHINV bit marks entire entry as invalid */
+ if (cpu_has_tlbinv && entryhi & MIPS_ENTRYHI_EHINV)
+ continue;
+ /*
+ * Prior to tlbinv, unused entries have a virtual address of
+ * CKSEG0.
+ */
+ if ((entryhi & ~0x1ffffUL) == CKSEG0)
+ continue;
+ /*
+ * ASID takes effect in absence of G (global) bit.
+ * We check both G bits, even though architecturally they should
+ * match one another, because some revisions of the SB1 core may
+ * leave only a single G bit set after a machine check exception
+ * due to duplicate TLB entry.
+ */
+ if (!((entrylo0 | entrylo1) & ENTRYLO_G) && (mmid != asid))
+ continue;
+
+ /*
+ * Only print entries in use
+ */
+ printk("Index: %2d pgmask=%s ", i, msk2str(pagemask));
+
+ c0 = (entrylo0 & ENTRYLO_C) >> ENTRYLO_C_SHIFT;
+ c1 = (entrylo1 & ENTRYLO_C) >> ENTRYLO_C_SHIFT;
+
+ pr_cont("va=%0*lx asid=%0*lx",
+ vwidth, (entryhi & ~0x1fffUL),
+ asidwidth, mmid);
+ if (cpu_has_guestid)
+ pr_cont(" gid=%02lx",
+ (guestctl1 & MIPS_GCTL1_RID)
+ >> MIPS_GCTL1_RID_SHIFT);
+ /* RI/XI are in awkward places, so mask them off separately */
+ pa = entrylo0 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
+ if (xpa)
+ pa |= (unsigned long long)readx_c0_entrylo0() << 30;
+ pa = (pa << 6) & PAGE_MASK;
+ pr_cont("\n\t[");
+ if (cpu_has_rixi)
+ pr_cont("ri=%d xi=%d ",
+ (entrylo0 & MIPS_ENTRYLO_RI) ? 1 : 0,
+ (entrylo0 & MIPS_ENTRYLO_XI) ? 1 : 0);
+ pr_cont("pa=%0*llx c=%d d=%d v=%d g=%d] [",
+ pwidth, pa, c0,
+ (entrylo0 & ENTRYLO_D) ? 1 : 0,
+ (entrylo0 & ENTRYLO_V) ? 1 : 0,
+ (entrylo0 & ENTRYLO_G) ? 1 : 0);
+ /* RI/XI are in awkward places, so mask them off separately */
+ pa = entrylo1 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
+ if (xpa)
+ pa |= (unsigned long long)readx_c0_entrylo1() << 30;
+ pa = (pa << 6) & PAGE_MASK;
+ if (cpu_has_rixi)
+ pr_cont("ri=%d xi=%d ",
+ (entrylo1 & MIPS_ENTRYLO_RI) ? 1 : 0,
+ (entrylo1 & MIPS_ENTRYLO_XI) ? 1 : 0);
+ pr_cont("pa=%0*llx c=%d d=%d v=%d g=%d]\n",
+ pwidth, pa, c1,
+ (entrylo1 & ENTRYLO_D) ? 1 : 0,
+ (entrylo1 & ENTRYLO_V) ? 1 : 0,
+ (entrylo1 & ENTRYLO_G) ? 1 : 0);
+ }
+ printk("\n");
+
+ write_c0_entryhi(s_entryhi);
+ write_c0_index(s_index);
+ write_c0_pagemask(s_pagemask);
+ if (cpu_has_guestid)
+ write_c0_guestctl1(s_guestctl1);
+}
+
+void dump_tlb_all(void)
+{
+ dump_tlb(0, current_cpu_data.tlbsize - 1);
+}
diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c
new file mode 100644
index 000000000..a9cb28813
--- /dev/null
+++ b/arch/mips/lib/iomap-pci.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Implement the default iomap interfaces
+ *
+ * (C) Copyright 2004 Linus Torvalds
+ * (C) Copyright 2006 Ralf Baechle <ralf@linux-mips.org>
+ * (C) Copyright 2007 MIPS Technologies, Inc.
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/pci.h>
+#include <linux/export.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_PCI_DRIVERS_LEGACY
+
+void __iomem *__pci_ioport_map(struct pci_dev *dev,
+ unsigned long port, unsigned int nr)
+{
+ struct pci_controller *ctrl = dev->bus->sysdata;
+ unsigned long base = ctrl->io_map_base;
+
+ /* This will eventually become a BUG_ON but for now be gentle */
+ if (unlikely(!ctrl->io_map_base)) {
+ struct pci_bus *bus = dev->bus;
+ char name[8];
+
+ while (bus->parent)
+ bus = bus->parent;
+
+ ctrl->io_map_base = base = mips_io_port_base;
+
+ sprintf(name, "%04x:%02x", pci_domain_nr(bus), bus->number);
+ printk(KERN_WARNING "io_map_base of root PCI bus %s unset. "
+ "Trying to continue but you better\nfix this issue or "
+ "report it to linux-mips@vger.kernel.org or your "
+ "vendor.\n", name);
+#ifdef CONFIG_PCI_DOMAINS
+ panic("To avoid data corruption io_map_base MUST be set with "
+ "multiple PCI domains.");
+#endif
+ }
+
+ return (void __iomem *) (ctrl->io_map_base + port);
+}
+
+#endif /* CONFIG_PCI_DRIVERS_LEGACY */
diff --git a/arch/mips/lib/iomap_copy.c b/arch/mips/lib/iomap_copy.c
new file mode 100644
index 000000000..157500a09
--- /dev/null
+++ b/arch/mips/lib/iomap_copy.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/export.h>
+#include <linux/io.h>
+
+/**
+ * __ioread64_copy - copy data from MMIO space, in 64-bit units
+ * @to: destination (must be 64-bit aligned)
+ * @from: source, in MMIO space (must be 64-bit aligned)
+ * @count: number of 64-bit quantities to copy
+ *
+ * Copy data from MMIO space to kernel space, in units of 32 or 64 bits at a
+ * time. Order of access is not guaranteed, nor is a memory barrier
+ * performed afterwards.
+ */
+void __ioread64_copy(void *to, const void __iomem *from, size_t count)
+{
+#ifdef CONFIG_64BIT
+ u64 *dst = to;
+ const u64 __iomem *src = from;
+ const u64 __iomem *end = src + count;
+
+ while (src < end)
+ *dst++ = __raw_readq(src++);
+#else
+ __ioread32_copy(to, from, count * 2);
+#endif
+}
+EXPORT_SYMBOL_GPL(__ioread64_copy);
diff --git a/arch/mips/lib/libgcc.h b/arch/mips/lib/libgcc.h
new file mode 100644
index 000000000..199a7f962
--- /dev/null
+++ b/arch/mips/lib/libgcc.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_LIBGCC_H
+#define __ASM_LIBGCC_H
+
+#include <asm/byteorder.h>
+
+typedef int word_type __attribute__ ((mode (__word__)));
+
+#ifdef __BIG_ENDIAN
+struct DWstruct {
+ int high, low;
+};
+
+struct TWstruct {
+ long long high, low;
+};
+#elif defined(__LITTLE_ENDIAN)
+struct DWstruct {
+ int low, high;
+};
+
+struct TWstruct {
+ long long low, high;
+};
+#else
+#error I feel sick.
+#endif
+
+typedef union {
+ struct DWstruct s;
+ long long ll;
+} DWunion;
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPSR6)
+typedef int ti_type __attribute__((mode(TI)));
+
+typedef union {
+ struct TWstruct s;
+ ti_type ti;
+} TWunion;
+#endif
+
+#endif /* __ASM_LIBGCC_H */
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
new file mode 100644
index 000000000..18a43f2e2
--- /dev/null
+++ b/arch/mips/lib/memcpy.S
@@ -0,0 +1,704 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Unified implementation of memcpy, memmove and the __copy_user backend.
+ *
+ * Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc.
+ * Copyright (C) 2002 Broadcom, Inc.
+ * memcpy/copy_user author: Mark Vandevoorde
+ * Copyright (C) 2007 Maciej W. Rozycki
+ * Copyright (C) 2014 Imagination Technologies Ltd.
+ *
+ * Mnemonic names for arguments to memcpy/__copy_user
+ */
+
+/*
+ * Hack to resolve longstanding prefetch issue
+ *
+ * Prefetching may be fatal on some systems if we're prefetching beyond the
+ * end of memory on some systems. It's also a seriously bad idea on non
+ * dma-coherent systems.
+ */
+#ifdef CONFIG_DMA_NONCOHERENT
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+#ifdef CONFIG_CPU_MIPSR6
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/export.h>
+#include <asm/regdef.h>
+
+#define dst a0
+#define src a1
+#define len a2
+
+/*
+ * Spec
+ *
+ * memcpy copies len bytes from src to dst and sets v0 to dst.
+ * It assumes that
+ * - src and dst don't overlap
+ * - src is readable
+ * - dst is writable
+ * memcpy uses the standard calling convention
+ *
+ * __copy_user copies up to len bytes from src to dst and sets a2 (len) to
+ * the number of uncopied bytes due to an exception caused by a read or write.
+ * __copy_user assumes that src and dst don't overlap, and that the call is
+ * implementing one of the following:
+ * copy_to_user
+ * - src is readable (no exceptions when reading src)
+ * copy_from_user
+ * - dst is writable (no exceptions when writing dst)
+ * __copy_user uses a non-standard calling convention; see
+ * include/asm-mips/uaccess.h
+ *
+ * When an exception happens on a load, the handler must
+ # ensure that all of the destination buffer is overwritten to prevent
+ * leaking information to user mode programs.
+ */
+
+/*
+ * Implementation
+ */
+
+/*
+ * The exception handler for loads requires that:
+ * 1- AT contain the address of the byte just past the end of the source
+ * of the copy,
+ * 2- src_entry <= src < AT, and
+ * 3- (dst - src) == (dst_entry - src_entry),
+ * The _entry suffix denotes values when __copy_user was called.
+ *
+ * (1) is set up up by uaccess.h and maintained by not writing AT in copy_user
+ * (2) is met by incrementing src by the number of bytes copied
+ * (3) is met by not doing loads between a pair of increments of dst and src
+ *
+ * The exception handlers for stores adjust len (if necessary) and return.
+ * These handlers do not need to overwrite any data.
+ *
+ * For __rmemcpy and memmove an exception is always a kernel bug, therefore
+ * they're not protected.
+ */
+
+/* Instruction type */
+#define LD_INSN 1
+#define ST_INSN 2
+/* Pretech type */
+#define SRC_PREFETCH 1
+#define DST_PREFETCH 2
+#define LEGACY_MODE 1
+#define EVA_MODE 2
+#define USEROP 1
+#define KERNELOP 2
+
+/*
+ * Wrapper to add an entry in the exception table
+ * in case the insn causes a memory exception.
+ * Arguments:
+ * insn : Load/store instruction
+ * type : Instruction type
+ * reg : Register
+ * addr : Address
+ * handler : Exception handler
+ */
+
+#define EXC(insn, type, reg, addr, handler) \
+ .if \mode == LEGACY_MODE; \
+9: insn reg, addr; \
+ .section __ex_table,"a"; \
+ PTR_WD 9b, handler; \
+ .previous; \
+ /* This is assembled in EVA mode */ \
+ .else; \
+ /* If loading from user or storing to user */ \
+ .if ((\from == USEROP) && (type == LD_INSN)) || \
+ ((\to == USEROP) && (type == ST_INSN)); \
+9: __BUILD_EVA_INSN(insn##e, reg, addr); \
+ .section __ex_table,"a"; \
+ PTR_WD 9b, handler; \
+ .previous; \
+ .else; \
+ /* \
+ * Still in EVA, but no need for \
+ * exception handler or EVA insn \
+ */ \
+ insn reg, addr; \
+ .endif; \
+ .endif
+
+/*
+ * Only on the 64-bit kernel we can made use of 64-bit registers.
+ */
+#ifdef CONFIG_64BIT
+#define USE_DOUBLE
+#endif
+
+#ifdef USE_DOUBLE
+
+#define LOADK ld /* No exception */
+#define LOAD(reg, addr, handler) EXC(ld, LD_INSN, reg, addr, handler)
+#define LOADL(reg, addr, handler) EXC(ldl, LD_INSN, reg, addr, handler)
+#define LOADR(reg, addr, handler) EXC(ldr, LD_INSN, reg, addr, handler)
+#define STOREL(reg, addr, handler) EXC(sdl, ST_INSN, reg, addr, handler)
+#define STORER(reg, addr, handler) EXC(sdr, ST_INSN, reg, addr, handler)
+#define STORE(reg, addr, handler) EXC(sd, ST_INSN, reg, addr, handler)
+#define ADD daddu
+#define SUB dsubu
+#define SRL dsrl
+#define SRA dsra
+#define SLL dsll
+#define SLLV dsllv
+#define SRLV dsrlv
+#define NBYTES 8
+#define LOG_NBYTES 3
+
+/*
+ * As we are sharing code base with the mips32 tree (which use the o32 ABI
+ * register definitions). We need to redefine the register definitions from
+ * the n64 ABI register naming to the o32 ABI register naming.
+ */
+#undef t0
+#undef t1
+#undef t2
+#undef t3
+#define t0 $8
+#define t1 $9
+#define t2 $10
+#define t3 $11
+#define t4 $12
+#define t5 $13
+#define t6 $14
+#define t7 $15
+
+#else
+
+#define LOADK lw /* No exception */
+#define LOAD(reg, addr, handler) EXC(lw, LD_INSN, reg, addr, handler)
+#define LOADL(reg, addr, handler) EXC(lwl, LD_INSN, reg, addr, handler)
+#define LOADR(reg, addr, handler) EXC(lwr, LD_INSN, reg, addr, handler)
+#define STOREL(reg, addr, handler) EXC(swl, ST_INSN, reg, addr, handler)
+#define STORER(reg, addr, handler) EXC(swr, ST_INSN, reg, addr, handler)
+#define STORE(reg, addr, handler) EXC(sw, ST_INSN, reg, addr, handler)
+#define ADD addu
+#define SUB subu
+#define SRL srl
+#define SLL sll
+#define SRA sra
+#define SLLV sllv
+#define SRLV srlv
+#define NBYTES 4
+#define LOG_NBYTES 2
+
+#endif /* USE_DOUBLE */
+
+#define LOADB(reg, addr, handler) EXC(lb, LD_INSN, reg, addr, handler)
+#define STOREB(reg, addr, handler) EXC(sb, ST_INSN, reg, addr, handler)
+
+#ifdef CONFIG_CPU_HAS_PREFETCH
+# define _PREF(hint, addr, type) \
+ .if \mode == LEGACY_MODE; \
+ kernel_pref(hint, addr); \
+ .else; \
+ .if ((\from == USEROP) && (type == SRC_PREFETCH)) || \
+ ((\to == USEROP) && (type == DST_PREFETCH)); \
+ /* \
+ * PREFE has only 9 bits for the offset \
+ * compared to PREF which has 16, so it may \
+ * need to use the $at register but this \
+ * register should remain intact because it's \
+ * used later on. Therefore use $v1. \
+ */ \
+ .set at=v1; \
+ user_pref(hint, addr); \
+ .set noat; \
+ .else; \
+ kernel_pref(hint, addr); \
+ .endif; \
+ .endif
+#else
+# define _PREF(hint, addr, type)
+#endif
+
+#define PREFS(hint, addr) _PREF(hint, addr, SRC_PREFETCH)
+#define PREFD(hint, addr) _PREF(hint, addr, DST_PREFETCH)
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define LDFIRST LOADR
+#define LDREST LOADL
+#define STFIRST STORER
+#define STREST STOREL
+#define SHIFT_DISCARD SLLV
+#else
+#define LDFIRST LOADL
+#define LDREST LOADR
+#define STFIRST STOREL
+#define STREST STORER
+#define SHIFT_DISCARD SRLV
+#endif
+
+#define FIRST(unit) ((unit)*NBYTES)
+#define REST(unit) (FIRST(unit)+NBYTES-1)
+#define UNIT(unit) FIRST(unit)
+
+#define ADDRMASK (NBYTES-1)
+
+ .text
+ .set noreorder
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+ .set noat
+#else
+ .set at=v1
+#endif
+
+ .align 5
+
+ /*
+ * Macro to build the __copy_user common code
+ * Arguments:
+ * mode : LEGACY_MODE or EVA_MODE
+ * from : Source operand. USEROP or KERNELOP
+ * to : Destination operand. USEROP or KERNELOP
+ */
+ .macro __BUILD_COPY_USER mode, from, to
+
+ /* initialize __memcpy if this the first time we execute this macro */
+ .ifnotdef __memcpy
+ .set __memcpy, 1
+ .hidden __memcpy /* make sure it does not leak */
+ .endif
+
+ /*
+ * Note: dst & src may be unaligned, len may be 0
+ * Temps
+ */
+#define rem t8
+
+ R10KCBARRIER(0(ra))
+ /*
+ * The "issue break"s below are very approximate.
+ * Issue delays for dcache fills will perturb the schedule, as will
+ * load queue full replay traps, etc.
+ *
+ * If len < NBYTES use byte operations.
+ */
+ PREFS( 0, 0(src) )
+ PREFD( 1, 0(dst) )
+ sltu t2, len, NBYTES
+ and t1, dst, ADDRMASK
+ PREFS( 0, 1*32(src) )
+ PREFD( 1, 1*32(dst) )
+ bnez t2, .Lcopy_bytes_checklen\@
+ and t0, src, ADDRMASK
+ PREFS( 0, 2*32(src) )
+ PREFD( 1, 2*32(dst) )
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+ bnez t1, .Ldst_unaligned\@
+ nop
+ bnez t0, .Lsrc_unaligned_dst_aligned\@
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+ or t0, t0, t1
+ bnez t0, .Lcopy_unaligned_bytes\@
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+ /*
+ * use delay slot for fall-through
+ * src and dst are aligned; need to compute rem
+ */
+.Lboth_aligned\@:
+ SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter
+ beqz t0, .Lcleanup_both_aligned\@ # len < 8*NBYTES
+ and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES)
+ PREFS( 0, 3*32(src) )
+ PREFD( 1, 3*32(dst) )
+ .align 4
+1:
+ R10KCBARRIER(0(ra))
+ LOAD(t0, UNIT(0)(src), .Ll_exc\@)
+ LOAD(t1, UNIT(1)(src), .Ll_exc_copy\@)
+ LOAD(t2, UNIT(2)(src), .Ll_exc_copy\@)
+ LOAD(t3, UNIT(3)(src), .Ll_exc_copy\@)
+ SUB len, len, 8*NBYTES
+ LOAD(t4, UNIT(4)(src), .Ll_exc_copy\@)
+ LOAD(t7, UNIT(5)(src), .Ll_exc_copy\@)
+ STORE(t0, UNIT(0)(dst), .Ls_exc_p8u\@)
+ STORE(t1, UNIT(1)(dst), .Ls_exc_p7u\@)
+ LOAD(t0, UNIT(6)(src), .Ll_exc_copy\@)
+ LOAD(t1, UNIT(7)(src), .Ll_exc_copy\@)
+ ADD src, src, 8*NBYTES
+ ADD dst, dst, 8*NBYTES
+ STORE(t2, UNIT(-6)(dst), .Ls_exc_p6u\@)
+ STORE(t3, UNIT(-5)(dst), .Ls_exc_p5u\@)
+ STORE(t4, UNIT(-4)(dst), .Ls_exc_p4u\@)
+ STORE(t7, UNIT(-3)(dst), .Ls_exc_p3u\@)
+ STORE(t0, UNIT(-2)(dst), .Ls_exc_p2u\@)
+ STORE(t1, UNIT(-1)(dst), .Ls_exc_p1u\@)
+ PREFS( 0, 8*32(src) )
+ PREFD( 1, 8*32(dst) )
+ bne len, rem, 1b
+ nop
+
+ /*
+ * len == rem == the number of bytes left to copy < 8*NBYTES
+ */
+.Lcleanup_both_aligned\@:
+ beqz len, .Ldone\@
+ sltu t0, len, 4*NBYTES
+ bnez t0, .Lless_than_4units\@
+ and rem, len, (NBYTES-1) # rem = len % NBYTES
+ /*
+ * len >= 4*NBYTES
+ */
+ LOAD( t0, UNIT(0)(src), .Ll_exc\@)
+ LOAD( t1, UNIT(1)(src), .Ll_exc_copy\@)
+ LOAD( t2, UNIT(2)(src), .Ll_exc_copy\@)
+ LOAD( t3, UNIT(3)(src), .Ll_exc_copy\@)
+ SUB len, len, 4*NBYTES
+ ADD src, src, 4*NBYTES
+ R10KCBARRIER(0(ra))
+ STORE(t0, UNIT(0)(dst), .Ls_exc_p4u\@)
+ STORE(t1, UNIT(1)(dst), .Ls_exc_p3u\@)
+ STORE(t2, UNIT(2)(dst), .Ls_exc_p2u\@)
+ STORE(t3, UNIT(3)(dst), .Ls_exc_p1u\@)
+ .set reorder /* DADDI_WAR */
+ ADD dst, dst, 4*NBYTES
+ beqz len, .Ldone\@
+ .set noreorder
+.Lless_than_4units\@:
+ /*
+ * rem = len % NBYTES
+ */
+ beq rem, len, .Lcopy_bytes\@
+ nop
+1:
+ R10KCBARRIER(0(ra))
+ LOAD(t0, 0(src), .Ll_exc\@)
+ ADD src, src, NBYTES
+ SUB len, len, NBYTES
+ STORE(t0, 0(dst), .Ls_exc_p1u\@)
+ .set reorder /* DADDI_WAR */
+ ADD dst, dst, NBYTES
+ bne rem, len, 1b
+ .set noreorder
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+ /*
+ * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
+ * A loop would do only a byte at a time with possible branch
+ * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE
+ * because can't assume read-access to dst. Instead, use
+ * STREST dst, which doesn't require read access to dst.
+ *
+ * This code should perform better than a simple loop on modern,
+ * wide-issue mips processors because the code has fewer branches and
+ * more instruction-level parallelism.
+ */
+#define bits t2
+ beqz len, .Ldone\@
+ ADD t1, dst, len # t1 is just past last byte of dst
+ li bits, 8*NBYTES
+ SLL rem, len, 3 # rem = number of bits to keep
+ LOAD(t0, 0(src), .Ll_exc\@)
+ SUB bits, bits, rem # bits = number of bits to discard
+ SHIFT_DISCARD t0, t0, bits
+ STREST(t0, -1(t1), .Ls_exc\@)
+ jr ra
+ move len, zero
+.Ldst_unaligned\@:
+ /*
+ * dst is unaligned
+ * t0 = src & ADDRMASK
+ * t1 = dst & ADDRMASK; T1 > 0
+ * len >= NBYTES
+ *
+ * Copy enough bytes to align dst
+ * Set match = (src and dst have same alignment)
+ */
+#define match rem
+ LDFIRST(t3, FIRST(0)(src), .Ll_exc\@)
+ ADD t2, zero, NBYTES
+ LDREST(t3, REST(0)(src), .Ll_exc_copy\@)
+ SUB t2, t2, t1 # t2 = number of bytes copied
+ xor match, t0, t1
+ R10KCBARRIER(0(ra))
+ STFIRST(t3, FIRST(0)(dst), .Ls_exc\@)
+ beq len, t2, .Ldone\@
+ SUB len, len, t2
+ ADD dst, dst, t2
+ beqz match, .Lboth_aligned\@
+ ADD src, src, t2
+
+.Lsrc_unaligned_dst_aligned\@:
+ SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter
+ PREFS( 0, 3*32(src) )
+ beqz t0, .Lcleanup_src_unaligned\@
+ and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES
+ PREFD( 1, 3*32(dst) )
+1:
+/*
+ * Avoid consecutive LD*'s to the same register since some mips
+ * implementations can't issue them in the same cycle.
+ * It's OK to load FIRST(N+1) before REST(N) because the two addresses
+ * are to the same unit (unless src is aligned, but it's not).
+ */
+ R10KCBARRIER(0(ra))
+ LDFIRST(t0, FIRST(0)(src), .Ll_exc\@)
+ LDFIRST(t1, FIRST(1)(src), .Ll_exc_copy\@)
+ SUB len, len, 4*NBYTES
+ LDREST(t0, REST(0)(src), .Ll_exc_copy\@)
+ LDREST(t1, REST(1)(src), .Ll_exc_copy\@)
+ LDFIRST(t2, FIRST(2)(src), .Ll_exc_copy\@)
+ LDFIRST(t3, FIRST(3)(src), .Ll_exc_copy\@)
+ LDREST(t2, REST(2)(src), .Ll_exc_copy\@)
+ LDREST(t3, REST(3)(src), .Ll_exc_copy\@)
+ PREFS( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed)
+ ADD src, src, 4*NBYTES
+#ifdef CONFIG_CPU_SB1
+ nop # improves slotting
+#endif
+ STORE(t0, UNIT(0)(dst), .Ls_exc_p4u\@)
+ STORE(t1, UNIT(1)(dst), .Ls_exc_p3u\@)
+ STORE(t2, UNIT(2)(dst), .Ls_exc_p2u\@)
+ STORE(t3, UNIT(3)(dst), .Ls_exc_p1u\@)
+ PREFD( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed)
+ .set reorder /* DADDI_WAR */
+ ADD dst, dst, 4*NBYTES
+ bne len, rem, 1b
+ .set noreorder
+
+.Lcleanup_src_unaligned\@:
+ beqz len, .Ldone\@
+ and rem, len, NBYTES-1 # rem = len % NBYTES
+ beq rem, len, .Lcopy_bytes\@
+ nop
+1:
+ R10KCBARRIER(0(ra))
+ LDFIRST(t0, FIRST(0)(src), .Ll_exc\@)
+ LDREST(t0, REST(0)(src), .Ll_exc_copy\@)
+ ADD src, src, NBYTES
+ SUB len, len, NBYTES
+ STORE(t0, 0(dst), .Ls_exc_p1u\@)
+ .set reorder /* DADDI_WAR */
+ ADD dst, dst, NBYTES
+ bne len, rem, 1b
+ .set noreorder
+
+#endif /* !CONFIG_CPU_NO_LOAD_STORE_LR */
+.Lcopy_bytes_checklen\@:
+ beqz len, .Ldone\@
+ nop
+.Lcopy_bytes\@:
+ /* 0 < len < NBYTES */
+ R10KCBARRIER(0(ra))
+#define COPY_BYTE(N) \
+ LOADB(t0, N(src), .Ll_exc\@); \
+ SUB len, len, 1; \
+ beqz len, .Ldone\@; \
+ STOREB(t0, N(dst), .Ls_exc_p1\@)
+
+ COPY_BYTE(0)
+ COPY_BYTE(1)
+#ifdef USE_DOUBLE
+ COPY_BYTE(2)
+ COPY_BYTE(3)
+ COPY_BYTE(4)
+ COPY_BYTE(5)
+#endif
+ LOADB(t0, NBYTES-2(src), .Ll_exc\@)
+ SUB len, len, 1
+ jr ra
+ STOREB(t0, NBYTES-2(dst), .Ls_exc_p1\@)
+.Ldone\@:
+ jr ra
+ nop
+
+#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
+.Lcopy_unaligned_bytes\@:
+1:
+ COPY_BYTE(0)
+ COPY_BYTE(1)
+ COPY_BYTE(2)
+ COPY_BYTE(3)
+ COPY_BYTE(4)
+ COPY_BYTE(5)
+ COPY_BYTE(6)
+ COPY_BYTE(7)
+ ADD src, src, 8
+ b 1b
+ ADD dst, dst, 8
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+ .if __memcpy == 1
+ END(memcpy)
+ .set __memcpy, 0
+ .hidden __memcpy
+ .endif
+
+.Ll_exc_copy\@:
+ /*
+ * Copy bytes from src until faulting load address (or until a
+ * lb faults)
+ *
+ * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
+ * may be more than a byte beyond the last address.
+ * Hence, the lb below may get an exception.
+ *
+ * Assumes src < THREAD_BUADDR($28)
+ */
+ LOADK t0, TI_TASK($28)
+ nop
+ LOADK t0, THREAD_BUADDR(t0)
+1:
+ LOADB(t1, 0(src), .Ll_exc\@)
+ ADD src, src, 1
+ sb t1, 0(dst) # can't fault -- we're copy_from_user
+ .set reorder /* DADDI_WAR */
+ ADD dst, dst, 1
+ bne src, t0, 1b
+ .set noreorder
+.Ll_exc\@:
+ LOADK t0, TI_TASK($28)
+ nop
+ LOADK t0, THREAD_BUADDR(t0) # t0 is just past last good address
+ nop
+ SUB len, AT, t0 # len number of uncopied bytes
+ jr ra
+ nop
+
+#define SEXC(n) \
+ .set reorder; /* DADDI_WAR */ \
+.Ls_exc_p ## n ## u\@: \
+ ADD len, len, n*NBYTES; \
+ jr ra; \
+ .set noreorder
+
+SEXC(8)
+SEXC(7)
+SEXC(6)
+SEXC(5)
+SEXC(4)
+SEXC(3)
+SEXC(2)
+SEXC(1)
+
+.Ls_exc_p1\@:
+ .set reorder /* DADDI_WAR */
+ ADD len, len, 1
+ jr ra
+ .set noreorder
+.Ls_exc\@:
+ jr ra
+ nop
+ .endm
+
+#ifndef CONFIG_HAVE_PLAT_MEMCPY
+ .align 5
+LEAF(memmove)
+EXPORT_SYMBOL(memmove)
+ ADD t0, a0, a2
+ ADD t1, a1, a2
+ sltu t0, a1, t0 # dst + len <= src -> memcpy
+ sltu t1, a0, t1 # dst >= src + len -> memcpy
+ and t0, t1
+ beqz t0, .L__memcpy
+ move v0, a0 /* return value */
+ beqz a2, .Lr_out
+ END(memmove)
+
+ /* fall through to __rmemcpy */
+LEAF(__rmemcpy) /* a0=dst a1=src a2=len */
+ sltu t0, a1, a0
+ beqz t0, .Lr_end_bytes_up # src >= dst
+ nop
+ ADD a0, a2 # dst = dst + len
+ ADD a1, a2 # src = src + len
+
+.Lr_end_bytes:
+ R10KCBARRIER(0(ra))
+ lb t0, -1(a1)
+ SUB a2, a2, 0x1
+ sb t0, -1(a0)
+ SUB a1, a1, 0x1
+ .set reorder /* DADDI_WAR */
+ SUB a0, a0, 0x1
+ bnez a2, .Lr_end_bytes
+ .set noreorder
+
+.Lr_out:
+ jr ra
+ move a2, zero
+
+.Lr_end_bytes_up:
+ R10KCBARRIER(0(ra))
+ lb t0, (a1)
+ SUB a2, a2, 0x1
+ sb t0, (a0)
+ ADD a1, a1, 0x1
+ .set reorder /* DADDI_WAR */
+ ADD a0, a0, 0x1
+ bnez a2, .Lr_end_bytes_up
+ .set noreorder
+
+ jr ra
+ move a2, zero
+ END(__rmemcpy)
+
+/*
+ * A combined memcpy/__copy_user
+ * __copy_user sets len to 0 for success; else to an upper bound of
+ * the number of uncopied bytes.
+ * memcpy sets v0 to dst.
+ */
+ .align 5
+LEAF(memcpy) /* a0=dst a1=src a2=len */
+EXPORT_SYMBOL(memcpy)
+ move v0, dst /* return value */
+.L__memcpy:
+#ifndef CONFIG_EVA
+FEXPORT(__raw_copy_from_user)
+EXPORT_SYMBOL(__raw_copy_from_user)
+FEXPORT(__raw_copy_to_user)
+EXPORT_SYMBOL(__raw_copy_to_user)
+#endif
+ /* Legacy Mode, user <-> user */
+ __BUILD_COPY_USER LEGACY_MODE USEROP USEROP
+
+#endif
+
+#ifdef CONFIG_EVA
+
+/*
+ * For EVA we need distinct symbols for reading and writing to user space.
+ * This is because we need to use specific EVA instructions to perform the
+ * virtual <-> physical translation when a virtual address is actually in user
+ * space
+ */
+
+/*
+ * __copy_from_user (EVA)
+ */
+
+LEAF(__raw_copy_from_user)
+EXPORT_SYMBOL(__raw_copy_from_user)
+ __BUILD_COPY_USER EVA_MODE USEROP KERNELOP
+END(__raw_copy_from_user)
+
+
+
+/*
+ * __copy_to_user (EVA)
+ */
+
+LEAF(__raw_copy_to_user)
+EXPORT_SYMBOL(__raw_copy_to_user)
+__BUILD_COPY_USER EVA_MODE KERNELOP USEROP
+END(__raw_copy_to_user)
+
+#endif
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
new file mode 100644
index 000000000..0b342bae9
--- /dev/null
+++ b/arch/mips/lib/memset.S
@@ -0,0 +1,325 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 1999, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007 by Maciej W. Rozycki
+ * Copyright (C) 2011, 2012 MIPS Technologies, Inc.
+ */
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/export.h>
+#include <asm/regdef.h>
+
+#if LONGSIZE == 4
+#define LONG_S_L swl
+#define LONG_S_R swr
+#else
+#define LONG_S_L sdl
+#define LONG_S_R sdr
+#endif
+
+#ifdef CONFIG_CPU_MICROMIPS
+#define STORSIZE (LONGSIZE * 2)
+#define STORMASK (STORSIZE - 1)
+#define FILL64RG t8
+#define FILLPTRG t7
+#undef LONG_S
+#define LONG_S LONG_SP
+#else
+#define STORSIZE LONGSIZE
+#define STORMASK LONGMASK
+#define FILL64RG a1
+#define FILLPTRG t0
+#endif
+
+#define LEGACY_MODE 1
+#define EVA_MODE 2
+
+/*
+ * No need to protect it with EVA #ifdefery. The generated block of code
+ * will never be assembled if EVA is not enabled.
+ */
+#define __EVAFY(insn, reg, addr) __BUILD_EVA_INSN(insn##e, reg, addr)
+#define ___BUILD_EVA_INSN(insn, reg, addr) __EVAFY(insn, reg, addr)
+
+#define EX(insn,reg,addr,handler) \
+ .if \mode == LEGACY_MODE; \
+9: insn reg, addr; \
+ .else; \
+9: ___BUILD_EVA_INSN(insn, reg, addr); \
+ .endif; \
+ .section __ex_table,"a"; \
+ PTR_WD 9b, handler; \
+ .previous
+
+ .macro f_fill64 dst, offset, val, fixup, mode
+ EX(LONG_S, \val, (\offset + 0 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 1 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 2 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 3 * STORSIZE)(\dst), \fixup)
+#if ((defined(CONFIG_CPU_MICROMIPS) && (LONGSIZE == 4)) || !defined(CONFIG_CPU_MICROMIPS))
+ EX(LONG_S, \val, (\offset + 4 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 5 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 6 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 7 * STORSIZE)(\dst), \fixup)
+#endif
+#if (!defined(CONFIG_CPU_MICROMIPS) && (LONGSIZE == 4))
+ EX(LONG_S, \val, (\offset + 8 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 9 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 10 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 11 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 12 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 13 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 14 * STORSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 15 * STORSIZE)(\dst), \fixup)
+#endif
+ .endm
+
+ .align 5
+
+ /*
+ * Macro to generate the __bzero{,_user} symbol
+ * Arguments:
+ * mode: LEGACY_MODE or EVA_MODE
+ */
+ .macro __BUILD_BZERO mode
+ /* Initialize __memset if this is the first time we call this macro */
+ .ifnotdef __memset
+ .set __memset, 1
+ .hidden __memset /* Make sure it does not leak */
+ .endif
+
+ sltiu t0, a2, STORSIZE /* very small region? */
+ .set noreorder
+ bnez t0, .Lsmall_memset\@
+ andi t0, a0, STORMASK /* aligned? */
+ .set reorder
+
+#ifdef CONFIG_CPU_MICROMIPS
+ move t8, a1 /* used by 'swp' instruction */
+ move t9, a1
+#endif
+ .set noreorder
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+ beqz t0, 1f
+ PTR_SUBU t0, STORSIZE /* alignment in bytes */
+#else
+ .set noat
+ li AT, STORSIZE
+ beqz t0, 1f
+ PTR_SUBU t0, AT /* alignment in bytes */
+ .set at
+#endif
+ .set reorder
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+ R10KCBARRIER(0(ra))
+#ifdef __MIPSEB__
+ EX(LONG_S_L, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */
+#else
+ EX(LONG_S_R, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */
+#endif
+ PTR_SUBU a0, t0 /* long align ptr */
+ PTR_ADDU a2, t0 /* correct size */
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+#define STORE_BYTE(N) \
+ EX(sb, a1, N(a0), .Lbyte_fixup\@); \
+ .set noreorder; \
+ beqz t0, 0f; \
+ PTR_ADDU t0, 1; \
+ .set reorder;
+
+ PTR_ADDU a2, t0 /* correct size */
+ PTR_ADDU t0, 1
+ STORE_BYTE(0)
+ STORE_BYTE(1)
+#if LONGSIZE == 4
+ EX(sb, a1, 2(a0), .Lbyte_fixup\@)
+#else
+ STORE_BYTE(2)
+ STORE_BYTE(3)
+ STORE_BYTE(4)
+ STORE_BYTE(5)
+ EX(sb, a1, 6(a0), .Lbyte_fixup\@)
+#endif
+0:
+ ori a0, STORMASK
+ xori a0, STORMASK
+ PTR_ADDIU a0, STORSIZE
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+1: ori t1, a2, 0x3f /* # of full blocks */
+ xori t1, 0x3f
+ andi t0, a2, 0x40-STORSIZE
+ beqz t1, .Lmemset_partial\@ /* no block to fill */
+
+ PTR_ADDU t1, a0 /* end address */
+1: PTR_ADDIU a0, 64
+ R10KCBARRIER(0(ra))
+ f_fill64 a0, -64, FILL64RG, .Lfwd_fixup\@, \mode
+ bne t1, a0, 1b
+
+.Lmemset_partial\@:
+ R10KCBARRIER(0(ra))
+ PTR_LA t1, 2f /* where to start */
+#ifdef CONFIG_CPU_MICROMIPS
+ LONG_SRL t7, t0, 1
+#endif
+#if LONGSIZE == 4
+ PTR_SUBU t1, FILLPTRG
+#else
+ .set noat
+ LONG_SRL AT, FILLPTRG, 1
+ PTR_SUBU t1, AT
+ .set at
+#endif
+ PTR_ADDU a0, t0 /* dest ptr */
+ jr t1
+
+ /* ... but first do longs ... */
+ f_fill64 a0, -64, FILL64RG, .Lpartial_fixup\@, \mode
+2: andi a2, STORMASK /* At most one long to go */
+
+ .set noreorder
+ beqz a2, 1f
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+ PTR_ADDU a0, a2 /* What's left */
+ .set reorder
+ R10KCBARRIER(0(ra))
+#ifdef __MIPSEB__
+ EX(LONG_S_R, a1, -1(a0), .Llast_fixup\@)
+#else
+ EX(LONG_S_L, a1, -1(a0), .Llast_fixup\@)
+#endif
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+ PTR_SUBU t0, $0, a2
+ .set reorder
+ move a2, zero /* No remaining longs */
+ PTR_ADDIU t0, 1
+ STORE_BYTE(0)
+ STORE_BYTE(1)
+#if LONGSIZE == 4
+ EX(sb, a1, 2(a0), .Lbyte_fixup\@)
+#else
+ STORE_BYTE(2)
+ STORE_BYTE(3)
+ STORE_BYTE(4)
+ STORE_BYTE(5)
+ EX(sb, a1, 6(a0), .Lbyte_fixup\@)
+#endif
+0:
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+1: move a2, zero
+ jr ra
+
+.Lsmall_memset\@:
+ PTR_ADDU t1, a0, a2
+ beqz a2, 2f
+
+1: PTR_ADDIU a0, 1 /* fill bytewise */
+ R10KCBARRIER(0(ra))
+ .set noreorder
+ bne t1, a0, 1b
+ EX(sb, a1, -1(a0), .Lsmall_fixup\@)
+ .set reorder
+
+2: move a2, zero
+ jr ra /* done */
+ .if __memset == 1
+ END(memset)
+ .set __memset, 0
+ .hidden __memset
+ .endif
+
+#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
+.Lbyte_fixup\@:
+ /*
+ * unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1
+ * a2 = a2 - t0 + 1
+ */
+ PTR_SUBU a2, t0
+ PTR_ADDIU a2, 1
+ jr ra
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+.Lfirst_fixup\@:
+ /* unset_bytes already in a2 */
+ jr ra
+
+.Lfwd_fixup\@:
+ /*
+ * unset_bytes = partial_start_addr + #bytes - fault_addr
+ * a2 = t1 + (a2 & 3f) - $28->task->BUADDR
+ */
+ PTR_L t0, TI_TASK($28)
+ andi a2, 0x3f
+ LONG_L t0, THREAD_BUADDR(t0)
+ LONG_ADDU a2, t1
+ LONG_SUBU a2, t0
+ jr ra
+
+.Lpartial_fixup\@:
+ /*
+ * unset_bytes = partial_end_addr + #bytes - fault_addr
+ * a2 = a0 + (a2 & STORMASK) - $28->task->BUADDR
+ */
+ PTR_L t0, TI_TASK($28)
+ andi a2, STORMASK
+ LONG_L t0, THREAD_BUADDR(t0)
+ LONG_ADDU a2, a0
+ LONG_SUBU a2, t0
+ jr ra
+
+.Llast_fixup\@:
+ /* unset_bytes already in a2 */
+ jr ra
+
+.Lsmall_fixup\@:
+ /*
+ * unset_bytes = end_addr - current_addr + 1
+ * a2 = t1 - a0 + 1
+ */
+ PTR_SUBU a2, t1, a0
+ PTR_ADDIU a2, 1
+ jr ra
+
+ .endm
+
+/*
+ * memset(void *s, int c, size_t n)
+ *
+ * a0: start of area to clear
+ * a1: char to fill with
+ * a2: size of area to clear
+ */
+
+LEAF(memset)
+EXPORT_SYMBOL(memset)
+ move v0, a0 /* result */
+ beqz a1, 1f
+
+ andi a1, 0xff /* spread fillword */
+ LONG_SLL t1, a1, 8
+ or a1, t1
+ LONG_SLL t1, a1, 16
+#if LONGSIZE == 8
+ or a1, t1
+ LONG_SLL t1, a1, 32
+#endif
+ or a1, t1
+1:
+#ifndef CONFIG_EVA
+FEXPORT(__bzero)
+EXPORT_SYMBOL(__bzero)
+#endif
+ __BUILD_BZERO LEGACY_MODE
+
+#ifdef CONFIG_EVA
+LEAF(__bzero)
+EXPORT_SYMBOL(__bzero)
+ __BUILD_BZERO EVA_MODE
+END(__bzero)
+#endif
diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c
new file mode 100644
index 000000000..a9b72eacf
--- /dev/null
+++ b/arch/mips/lib/mips-atomic.c
@@ -0,0 +1,113 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#include <asm/irqflags.h>
+#include <asm/hazards.h>
+#include <linux/compiler.h>
+#include <linux/preempt.h>
+#include <linux/export.h>
+#include <linux/stringify.h>
+
+#if !defined(CONFIG_CPU_HAS_DIEI)
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+notrace void arch_local_irq_disable(void)
+{
+ preempt_disable_notrace();
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noat \n"
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1,$12 \n"
+ " " __stringify(__irq_disable_hazard) " \n"
+ " .set pop \n"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+
+ preempt_enable_notrace();
+}
+EXPORT_SYMBOL(arch_local_irq_disable);
+
+notrace unsigned long arch_local_irq_save(void)
+{
+ unsigned long flags;
+
+ preempt_disable_notrace();
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+ " mfc0 %[flags], $12 \n"
+ " ori $1, %[flags], 0x1f \n"
+ " xori $1, 0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1, $12 \n"
+ " " __stringify(__irq_disable_hazard) " \n"
+ " .set pop \n"
+ : [flags] "=r" (flags)
+ : /* no inputs */
+ : "memory");
+
+ preempt_enable_notrace();
+
+ return flags;
+}
+EXPORT_SYMBOL(arch_local_irq_save);
+
+notrace void arch_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+ preempt_disable_notrace();
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " mfc0 $1, $12 \n"
+ " andi %[flags], 1 \n"
+ " ori $1, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " or %[flags], $1 \n"
+ " mtc0 %[flags], $12 \n"
+ " " __stringify(__irq_disable_hazard) " \n"
+ " .set pop \n"
+ : [flags] "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+
+ preempt_enable_notrace();
+}
+EXPORT_SYMBOL(arch_local_irq_restore);
+
+#endif /* !CONFIG_CPU_HAS_DIEI */
diff --git a/arch/mips/lib/multi3.c b/arch/mips/lib/multi3.c
new file mode 100644
index 000000000..4c2483f41
--- /dev/null
+++ b/arch/mips/lib/multi3.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+/*
+ * GCC 7 & older can suboptimally generate __multi3 calls for mips64r6, so for
+ * that specific case only we implement that intrinsic here.
+ *
+ * See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82981
+ */
+#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPSR6) && (__GNUC__ < 8)
+
+/* multiply 64-bit values, low 64-bits returned */
+static inline long long notrace dmulu(long long a, long long b)
+{
+ long long res;
+
+ asm ("dmulu %0,%1,%2" : "=r" (res) : "r" (a), "r" (b));
+ return res;
+}
+
+/* multiply 64-bit unsigned values, high 64-bits of 128-bit result returned */
+static inline long long notrace dmuhu(long long a, long long b)
+{
+ long long res;
+
+ asm ("dmuhu %0,%1,%2" : "=r" (res) : "r" (a), "r" (b));
+ return res;
+}
+
+/* multiply 128-bit values, low 128-bits returned */
+ti_type notrace __multi3(ti_type a, ti_type b)
+{
+ TWunion res, aa, bb;
+
+ aa.ti = a;
+ bb.ti = b;
+
+ /*
+ * a * b = (a.lo * b.lo)
+ * + 2^64 * (a.hi * b.lo + a.lo * b.hi)
+ * [+ 2^128 * (a.hi * b.hi)]
+ */
+ res.s.low = dmulu(aa.s.low, bb.s.low);
+ res.s.high = dmuhu(aa.s.low, bb.s.low);
+ res.s.high += dmulu(aa.s.high, bb.s.low);
+ res.s.high += dmulu(aa.s.low, bb.s.high);
+
+ return res.ti;
+}
+EXPORT_SYMBOL(__multi3);
+
+#endif /* 64BIT && CPU_MIPSR6 && GCC7 */
diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c
new file mode 100644
index 000000000..fcf594af0
--- /dev/null
+++ b/arch/mips/lib/r3k_dump_tlb.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Dump R3000 TLB for debugging purposes.
+ *
+ * Copyright (C) 1994, 1995 by Waldorf Electronics, written by Ralf Baechle.
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Harald Koerfgen
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+#include <asm/tlbdebug.h>
+
+void dump_tlb_regs(void)
+{
+ pr_info("Index : %0x\n", read_c0_index());
+ pr_info("EntryHi : %0lx\n", read_c0_entryhi());
+ pr_info("EntryLo : %0lx\n", read_c0_entrylo0());
+}
+
+static void dump_tlb(int first, int last)
+{
+ int i;
+ unsigned int asid;
+ unsigned long entryhi, entrylo0, asid_mask;
+
+ asid_mask = cpu_asid_mask(&current_cpu_data);
+ asid = read_c0_entryhi() & asid_mask;
+
+ for (i = first; i <= last; i++) {
+ write_c0_index(i<<8);
+ __asm__ __volatile__(
+ ".set\tnoreorder\n\t"
+ "tlbr\n\t"
+ "nop\n\t"
+ ".set\treorder");
+ entryhi = read_c0_entryhi();
+ entrylo0 = read_c0_entrylo0();
+
+ /* Unused entries have a virtual address of KSEG0. */
+ if ((entryhi & PAGE_MASK) != KSEG0 &&
+ (entrylo0 & R3K_ENTRYLO_G ||
+ (entryhi & asid_mask) == asid)) {
+ /*
+ * Only print entries in use
+ */
+ printk("Index: %2d ", i);
+
+ pr_cont("va=%08lx asid=%08lx"
+ " [pa=%06lx n=%d d=%d v=%d g=%d]",
+ entryhi & PAGE_MASK,
+ entryhi & asid_mask,
+ entrylo0 & PAGE_MASK,
+ (entrylo0 & R3K_ENTRYLO_N) ? 1 : 0,
+ (entrylo0 & R3K_ENTRYLO_D) ? 1 : 0,
+ (entrylo0 & R3K_ENTRYLO_V) ? 1 : 0,
+ (entrylo0 & R3K_ENTRYLO_G) ? 1 : 0);
+ }
+ }
+ printk("\n");
+
+ write_c0_entryhi(asid);
+}
+
+void dump_tlb_all(void)
+{
+ dump_tlb(0, current_cpu_data.tlbsize - 1);
+}
diff --git a/arch/mips/lib/strncpy_user.S b/arch/mips/lib/strncpy_user.S
new file mode 100644
index 000000000..13aaa9927
--- /dev/null
+++ b/arch/mips/lib/strncpy_user.S
@@ -0,0 +1,65 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1999 by Ralf Baechle
+ * Copyright (C) 2011 MIPS Technologies, Inc.
+ */
+#include <linux/errno.h>
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/export.h>
+#include <asm/regdef.h>
+
+#define EX(insn,reg,addr,handler) \
+9: insn reg, addr; \
+ .section __ex_table,"a"; \
+ PTR_WD 9b, handler; \
+ .previous
+
+/*
+ * Returns: -EFAULT if exception before terminator, N if the entire
+ * buffer filled, else strlen.
+ */
+
+/*
+ * Ugly special case have to check: we might get passed a user space
+ * pointer which wraps into the kernel space. We don't deal with that. If
+ * it happens at most some bytes of the exceptions handlers will be copied.
+ */
+
+LEAF(__strncpy_from_user_asm)
+ move t0, zero
+ move v1, a1
+#ifdef CONFIG_EVA
+ .set push
+ .set eva
+1: EX(lbue, v0, (v1), .Lfault)
+ .set pop
+#else
+1: EX(lbu, v0, (v1), .Lfault)
+#endif
+ PTR_ADDIU v1, 1
+ R10KCBARRIER(0(ra))
+ sb v0, (a0)
+ beqz v0, 2f
+ PTR_ADDIU t0, 1
+ PTR_ADDIU a0, 1
+ bne t0, a2, 1b
+2: PTR_ADDU v0, a1, t0
+ xor v0, a1
+ bltz v0, .Lfault
+ move v0, t0
+ jr ra # return n
+ END(__strncpy_from_user_asm)
+
+.Lfault:
+ li v0, -EFAULT
+ jr ra
+
+ .section __ex_table,"a"
+ PTR_WD 1b, .Lfault
+ .previous
+
+ EXPORT_SYMBOL(__strncpy_from_user_asm)
diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S
new file mode 100644
index 000000000..6de31b616
--- /dev/null
+++ b/arch/mips/lib/strnlen_user.S
@@ -0,0 +1,64 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1996, 1998, 1999, 2004 by Ralf Baechle
+ * Copyright (c) 1999 Silicon Graphics, Inc.
+ */
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/export.h>
+#include <asm/regdef.h>
+
+#define EX(insn,reg,addr,handler) \
+9: insn reg, addr; \
+ .section __ex_table,"a"; \
+ PTR_WD 9b, handler; \
+ .previous
+
+/*
+ * Return the size of a string including the ending NUL character up to a
+ * maximum of a1 or 0 in case of error.
+ *
+ * Note: for performance reasons we deliberately accept that a user may
+ * make strlen_user and strnlen_user access the first few KSEG0
+ * bytes. There's nothing secret there. On 64-bit accessing beyond
+ * the maximum is a tad hairier ...
+ */
+LEAF(__strnlen_user_asm)
+ move v0, a0
+ PTR_ADDU a1, a0 # stop pointer
+1:
+#ifdef CONFIG_CPU_DADDI_WORKAROUNDS
+ .set noat
+ li AT, 1
+#endif
+ beq v0, a1, 1f # limit reached?
+#ifdef CONFIG_EVA
+ .set push
+ .set eva
+ EX(lbe, t0, (v0), .Lfault)
+ .set pop
+#else
+ EX(lb, t0, (v0), .Lfault)
+#endif
+ .set noreorder
+ bnez t0, 1b
+1:
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+ PTR_ADDIU v0, 1
+#else
+ PTR_ADDU v0, AT
+ .set at
+#endif
+ .set reorder
+ PTR_SUBU v0, a0
+ jr ra
+ END(__strnlen_user_asm)
+
+.Lfault:
+ move v0, zero
+ jr ra
+
+ EXPORT_SYMBOL(__strnlen_user_asm)
diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c
new file mode 100644
index 000000000..f80a67c09
--- /dev/null
+++ b/arch/mips/lib/uncached.c
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Thiemo Seufer
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Author: Maciej W. Rozycki <macro@mips.com>
+ */
+
+
+#include <asm/addrspace.h>
+#include <asm/bug.h>
+#include <asm/cacheflush.h>
+
+#ifndef CKSEG2
+#define CKSEG2 CKSSEG
+#endif
+#ifndef TO_PHYS_MASK
+#define TO_PHYS_MASK -1
+#endif
+
+/*
+ * FUNC is executed in one of the uncached segments, depending on its
+ * original address as follows:
+ *
+ * 1. If the original address is in CKSEG0 or CKSEG1, then the uncached
+ * segment used is CKSEG1.
+ * 2. If the original address is in XKPHYS, then the uncached segment
+ * used is XKPHYS(2).
+ * 3. Otherwise it's a bug.
+ *
+ * The same remapping is done with the stack pointer. Stack handling
+ * works because we don't handle stack arguments or more complex return
+ * values, so we can avoid sharing the same stack area between a cached
+ * and the uncached mode.
+ */
+unsigned long run_uncached(void *func)
+{
+ register long ret __asm__("$2");
+ long lfunc = (long)func, ufunc;
+ long usp;
+ long sp;
+
+ __asm__("move %0, $sp" : "=r" (sp));
+
+ if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
+ usp = CKSEG1ADDR(sp);
+#ifdef CONFIG_64BIT
+ else if ((long long)sp >= (long long)PHYS_TO_XKPHYS(0, 0) &&
+ (long long)sp < (long long)PHYS_TO_XKPHYS(8, 0))
+ usp = PHYS_TO_XKPHYS(K_CALG_UNCACHED,
+ XKPHYS_TO_PHYS((long long)sp));
+#endif
+ else {
+ BUG();
+ usp = sp;
+ }
+ if (lfunc >= (long)CKSEG0 && lfunc < (long)CKSEG2)
+ ufunc = CKSEG1ADDR(lfunc);
+#ifdef CONFIG_64BIT
+ else if ((long long)lfunc >= (long long)PHYS_TO_XKPHYS(0, 0) &&
+ (long long)lfunc < (long long)PHYS_TO_XKPHYS(8, 0))
+ ufunc = PHYS_TO_XKPHYS(K_CALG_UNCACHED,
+ XKPHYS_TO_PHYS((long long)lfunc));
+#endif
+ else {
+ BUG();
+ ufunc = lfunc;
+ }
+
+ __asm__ __volatile__ (
+ " move $16, $sp\n"
+ " move $sp, %1\n"
+ " jalr %2\n"
+ " move $sp, $16"
+ : "=r" (ret)
+ : "r" (usp), "r" (ufunc)
+ : "$16", "$31");
+
+ return ret;
+}