diff options
Diffstat (limited to 'arch/mips/mm/sc-mips.c')
| -rw-r--r-- | arch/mips/mm/sc-mips.c | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c new file mode 100644 index 000000000..06ec304ad --- /dev/null +++ b/arch/mips/mm/sc-mips.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2006 Chris Dearman (chris@mips.com), + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> + +#include <asm/cpu-type.h> +#include <asm/mipsregs.h> +#include <asm/bcache.h> +#include <asm/cacheops.h> +#include <asm/page.h> +#include <asm/mmu_context.h> +#include <asm/r4kcache.h> +#include <asm/mips-cps.h> +#include <asm/bootinfo.h> + +/* + * MIPS32/MIPS64 L2 cache handling + */ + +/* + * Writeback and invalidate the secondary cache before DMA. + */ +static void mips_sc_wback_inv(unsigned long addr, unsigned long size) +{ + blast_scache_range(addr, addr + size); +} + +/* + * Invalidate the secondary cache before DMA. + */ +static void mips_sc_inv(unsigned long addr, unsigned long size) +{ + unsigned long lsize = cpu_scache_line_size(); + unsigned long almask = ~(lsize - 1); + + cache_op(Hit_Writeback_Inv_SD, addr & almask); + cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask); + blast_inv_scache_range(addr, addr + size); +} + +static void mips_sc_enable(void) +{ + /* L2 cache is permanently enabled */ +} + +static void mips_sc_disable(void) +{ + /* L2 cache is permanently enabled */ +} + +static void mips_sc_prefetch_enable(void) +{ + unsigned long pftctl; + + if (mips_cm_revision() < CM_REV_CM2_5) + return; + + /* + * If there is one or more L2 prefetch unit present then enable + * prefetching for both code & data, for all ports. + */ + pftctl = read_gcr_l2_pft_control(); + if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT) { + pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK; + pftctl |= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK; + pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN; + write_gcr_l2_pft_control(pftctl); + + set_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID | + CM_GCR_L2_PFT_CONTROL_B_CEN); + } +} + +static void mips_sc_prefetch_disable(void) +{ + if (mips_cm_revision() < CM_REV_CM2_5) + return; + + clear_gcr_l2_pft_control(CM_GCR_L2_PFT_CONTROL_PFTEN); + clear_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID | + CM_GCR_L2_PFT_CONTROL_B_CEN); +} + +static bool mips_sc_prefetch_is_enabled(void) +{ + unsigned long pftctl; + + if (mips_cm_revision() < CM_REV_CM2_5) + return false; + + pftctl = read_gcr_l2_pft_control(); + if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT)) + return false; + return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN); +} + +static struct bcache_ops mips_sc_ops = { + .bc_enable = mips_sc_enable, + .bc_disable = mips_sc_disable, + .bc_wback_inv = mips_sc_wback_inv, + .bc_inv = mips_sc_inv, + .bc_prefetch_enable = mips_sc_prefetch_enable, + .bc_prefetch_disable = mips_sc_prefetch_disable, + .bc_prefetch_is_enabled = mips_sc_prefetch_is_enabled, +}; + +/* + * Check if the L2 cache controller is activated on a particular platform. + * MTI's L2 controller and the L2 cache controller of Broadcom's BMIPS + * cores both use c0_config2's bit 12 as "L2 Bypass" bit, that is the + * cache being disabled. However there is no guarantee for this to be + * true on all platforms. In an act of stupidity the spec defined bits + * 12..15 as implementation defined so below function will eventually have + * to be replaced by a platform specific probe. + */ +static inline int mips_sc_is_activated(struct cpuinfo_mips *c) +{ + unsigned int config2 = read_c0_config2(); + unsigned int tmp; + + /* Check the bypass bit (L2B) */ + switch (current_cpu_type()) { + case CPU_34K: + case CPU_74K: + case CPU_1004K: + case CPU_1074K: + case CPU_INTERAPTIV: + case CPU_PROAPTIV: + case CPU_P5600: + case CPU_BMIPS5000: + case CPU_QEMU_GENERIC: + case CPU_P6600: + if (config2 & (1 << 12)) + return 0; + } + + tmp = (config2 >> 4) & 0x0f; + if (0 < tmp && tmp <= 7) + c->scache.linesz = 2 << tmp; + else + return 0; + return 1; +} + +static int mips_sc_probe_cm3(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + unsigned long cfg = read_gcr_l2_config(); + unsigned long sets, line_sz, assoc; + + if (cfg & CM_GCR_L2_CONFIG_BYPASS) + return 0; + + sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE; + sets >>= __ffs(CM_GCR_L2_CONFIG_SET_SIZE); + if (sets) + c->scache.sets = 64 << sets; + + line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE; + line_sz >>= __ffs(CM_GCR_L2_CONFIG_LINE_SIZE); + if (line_sz) + c->scache.linesz = 2 << line_sz; + + assoc = cfg & CM_GCR_L2_CONFIG_ASSOC; + assoc >>= __ffs(CM_GCR_L2_CONFIG_ASSOC); + c->scache.ways = assoc + 1; + c->scache.waysize = c->scache.sets * c->scache.linesz; + c->scache.waybit = __ffs(c->scache.waysize); + + if (c->scache.linesz) { + c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; + c->options |= MIPS_CPU_INCLUSIVE_CACHES; + return 1; + } + + return 0; +} + +static inline int mips_sc_probe(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + unsigned int config1, config2; + unsigned int tmp; + + /* Mark as not present until probe completed */ + c->scache.flags |= MIPS_CACHE_NOT_PRESENT; + + if (mips_cm_revision() >= CM_REV_CM3) + return mips_sc_probe_cm3(); + + /* Ignore anything but MIPSxx processors */ + if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | + MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | + MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))) + return 0; + + /* Does this MIPS32/MIPS64 CPU have a config2 register? */ + config1 = read_c0_config1(); + if (!(config1 & MIPS_CONF_M)) + return 0; + + config2 = read_c0_config2(); + + if (!mips_sc_is_activated(c)) + return 0; + + tmp = (config2 >> 8) & 0x0f; + if (tmp <= 7) + c->scache.sets = 64 << tmp; + else + return 0; + + tmp = (config2 >> 0) & 0x0f; + if (tmp <= 7) + c->scache.ways = tmp + 1; + else + return 0; + + if (current_cpu_type() == CPU_XBURST) { + switch (mips_machtype) { + /* + * According to config2 it would be 5-ways, but that is + * contradicted by all documentation. + */ + case MACH_INGENIC_JZ4770: + case MACH_INGENIC_JZ4775: + c->scache.ways = 4; + break; + + /* + * According to config2 it would be 5-ways and 512-sets, + * but that is contradicted by all documentation. + */ + case MACH_INGENIC_X1000: + case MACH_INGENIC_X1000E: + c->scache.sets = 256; + c->scache.ways = 4; + break; + } + } + + c->scache.waysize = c->scache.sets * c->scache.linesz; + c->scache.waybit = __ffs(c->scache.waysize); + + c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; + + return 1; +} + +int mips_sc_init(void) +{ + int found = mips_sc_probe(); + if (found) { + mips_sc_enable(); + mips_sc_prefetch_enable(); + bcops = &mips_sc_ops; + } + return found; +} |