summaryrefslogtreecommitdiffstats
path: root/drivers/ata/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/Kconfig')
-rw-r--r--drivers/ata/Kconfig1210
1 files changed, 1210 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
new file mode 100644
index 000000000..d9b305a34
--- /dev/null
+++ b/drivers/ata/Kconfig
@@ -0,0 +1,1210 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# SATA/PATA driver configuration
+#
+
+config HAVE_PATA_PLATFORM
+ bool
+ help
+ This is an internal configuration node for any machine that
+ uses pata-platform driver to enable the relevant driver in the
+ configuration structure without having to submit endless patches
+ to update the PATA_PLATFORM entry.
+
+menuconfig ATA
+ tristate "Serial ATA and Parallel ATA drivers (libata)"
+ depends on HAS_IOMEM
+ depends on BLOCK
+ select SCSI
+ select GLOB
+ help
+ If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
+ any other ATA device under Linux, say Y and make sure that you know
+ the name of your ATA host adapter (the card inside your computer
+ that "speaks" the ATA protocol, also called ATA controller),
+ because you will be asked for it.
+
+ NOTE: ATA enables basic SCSI support; *however*,
+ 'SCSI disk support', 'SCSI tape support', or
+ 'SCSI CDROM support' may also be needed,
+ depending on your hardware configuration.
+
+if ATA
+
+config ATA_NONSTANDARD
+ bool
+
+config SATA_HOST
+ bool
+
+config PATA_TIMINGS
+ bool
+
+config ATA_VERBOSE_ERROR
+ bool "Verbose ATA error reporting"
+ default y
+ help
+ This option adds parsing of ATA command descriptions and error bits
+ in libata kernel output, making it easier to interpret.
+ This option will enlarge the kernel by approx. 6KB. Disable it only
+ if kernel size is more important than ease of debugging.
+
+ If unsure, say Y.
+
+config ATA_FORCE
+ bool "\"libata.force=\" kernel parameter support" if EXPERT
+ default y
+ help
+ This option adds support for "libata.force=" kernel parameter for
+ forcing configuration settings.
+
+ For further information, please read
+ <file:Documentation/admin-guide/kernel-parameters.txt>.
+
+ This option will enlarge the kernel by approx. 3KB. Disable it if
+ kernel size is more important than ability to override the default
+ configuration settings.
+
+ If unsure, say Y.
+
+config ATA_ACPI
+ bool "ATA ACPI Support"
+ depends on ACPI
+ select PATA_TIMINGS
+ default y
+ help
+ This option adds support for ATA-related ACPI objects.
+ These ACPI objects add the ability to retrieve taskfiles
+ from the ACPI BIOS and write them to the disk controller.
+ These objects may be related to performance, security,
+ power management, or other areas.
+ You can disable this at kernel boot time by using the
+ option libata.noacpi=1
+
+config SATA_ZPODD
+ bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
+ depends on ATA_ACPI && PM
+ help
+ This option adds support for SATA Zero Power Optical Disc
+ Drive (ZPODD). It requires both the ODD and the platform
+ support, and if enabled, will automatically power on/off the
+ ODD when certain condition is satisfied. This does not impact
+ end user's experience of the ODD, only power is saved when
+ the ODD is not in use (i.e. no disc inside).
+
+ If unsure, say N.
+
+config SATA_PMP
+ bool "SATA Port Multiplier support"
+ depends on SATA_HOST
+ default y
+ help
+ This option adds support for SATA Port Multipliers
+ (the SATA version of an ethernet hub, or SAS expander).
+
+if HAS_DMA
+
+comment "Controllers with non-SFF native interface"
+
+config SATA_AHCI
+ tristate "AHCI SATA support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for AHCI Serial ATA.
+
+ If unsure, say N.
+
+config SATA_MOBILE_LPM_POLICY
+ int "Default SATA Link Power Management policy for low power chipsets"
+ range 0 4
+ default 0
+ depends on SATA_AHCI
+ help
+ Select the Default SATA Link Power Management (LPM) policy to use
+ for chipsets / "South Bridges" supporting low-power modes. Such
+ chipsets are typically found on most laptops but desktops and
+ servers now also widely use chipsets supporting low power modes.
+
+ The value set has the following meanings:
+ 0 => Keep firmware settings
+ 1 => Maximum performance
+ 2 => Medium power
+ 3 => Medium power with Device Initiated PM enabled
+ 4 => Minimum power
+
+ Note "Minimum power" is known to cause issues, including disk
+ corruption, with some disks and should not be used.
+
+config SATA_AHCI_PLATFORM
+ tristate "Platform AHCI SATA support"
+ select SATA_HOST
+ help
+ This option enables support for Platform AHCI Serial ATA
+ controllers.
+
+ If unsure, say N.
+
+config AHCI_BRCM
+ tristate "Broadcom AHCI SATA support"
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
+ ARCH_BCMBCA || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for the AHCI SATA3 controller found on
+ Broadcom SoC's.
+
+ If unsure, say N.
+
+config AHCI_DA850
+ tristate "DaVinci DA850 AHCI SATA support"
+ depends on ARCH_DAVINCI_DA850 || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for the DaVinci DA850 SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_DM816
+ tristate "DaVinci DM816 AHCI SATA support"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for the DaVinci DM816 SoC's
+ onboard AHCI SATA controller.
+
+ If unsure, say N.
+
+config AHCI_DWC
+ tristate "Synopsys DWC AHCI SATA support"
+ select SATA_HOST
+ select MFD_SYSCON if (MIPS_BAIKAL_T1 || COMPILE_TEST)
+ help
+ This option enables support for the Synopsys DWC AHCI SATA
+ controller implementation.
+
+ If unsure, say N.
+
+config AHCI_ST
+ tristate "ST AHCI SATA support"
+ depends on ARCH_STI || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for ST AHCI SATA controller.
+
+ If unsure, say N.
+
+config AHCI_IMX
+ tristate "Freescale i.MX AHCI SATA support"
+ depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
+ depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
+ select SATA_HOST
+ help
+ This option enables support for the Freescale i.MX SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_CEVA
+ tristate "CEVA AHCI SATA support"
+ depends on OF
+ select SATA_HOST
+ help
+ This option enables support for the CEVA AHCI SATA.
+ It can be found on the Xilinx Zynq UltraScale+ MPSoC.
+
+ If unsure, say N.
+
+config AHCI_MTK
+ tristate "MediaTek AHCI SATA support"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ select MFD_SYSCON
+ select SATA_HOST
+ help
+ This option enables support for the MediaTek SoC's
+ onboard AHCI SATA controller.
+
+ If unsure, say N.
+
+config AHCI_MVEBU
+ tristate "Marvell EBU AHCI SATA support"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for the Marvebu EBU SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_OCTEON
+ tristate "Cavium Octeon Soc Serial ATA"
+ depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
+ default y
+ help
+ This option enables support for Cavium Octeon SoC Serial ATA.
+
+ If unsure, say N.
+
+config AHCI_SUNXI
+ tristate "Allwinner sunxi AHCI SATA support"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for the Allwinner sunxi SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_TEGRA
+ tristate "NVIDIA Tegra AHCI SATA support"
+ depends on ARCH_TEGRA || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for the NVIDIA Tegra SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_XGENE
+ tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
+ depends on PHY_XGENE || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for APM X-Gene SoC SATA host controller.
+
+config AHCI_QORIQ
+ tristate "Freescale QorIQ AHCI SATA support"
+ depends on OF
+ select SATA_HOST
+ help
+ This option enables support for the Freescale QorIQ AHCI SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config SATA_FSL
+ tristate "Freescale 3.0Gbps SATA support"
+ depends on FSL_SOC || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for Freescale 3.0Gbps SATA controller.
+ It can be found on MPC837x and MPC8315.
+
+ If unsure, say N.
+
+config SATA_GEMINI
+ tristate "Gemini SATA bridge support"
+ depends on ARCH_GEMINI || (OF && COMPILE_TEST)
+ select SATA_HOST
+ default ARCH_GEMINI
+ help
+ This enabled support for the FTIDE010 to SATA bridge
+ found in Cortina Systems Gemini platform.
+
+ If unsure, say N.
+
+config SATA_AHCI_SEATTLE
+ tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
+ depends on ARCH_SEATTLE || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for AMD Seattle SATA host controller.
+
+ If unsure, say N
+
+config SATA_INIC162X
+ tristate "Initio 162x SATA support (Very Experimental)"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for Initio 162x Serial ATA.
+
+config SATA_ACARD_AHCI
+ tristate "ACard AHCI variant (ATP 8620)"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for Acard.
+
+ If unsure, say N.
+
+config SATA_SIL24
+ tristate "Silicon Image 3124/3132 SATA support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for Silicon Image 3124/3132 Serial ATA.
+
+ If unsure, say N.
+
+endif # HAS_DMA
+
+config ATA_SFF
+ bool "ATA SFF support (for legacy IDE and PATA)"
+ default y
+ help
+ This option adds support for ATA controllers with SFF
+ compliant or similar programming interface.
+
+ SFF is the legacy IDE interface that has been around since
+ the dawn of time. Almost all PATA controllers have an
+ SFF interface. Many SATA controllers have an SFF interface
+ when configured into a legacy compatibility mode.
+
+ For users with exclusively modern controllers like AHCI,
+ Silicon Image 3124, or Marvell 6440, you may choose to
+ disable this unneeded SFF support.
+
+ If unsure, say Y.
+
+if ATA_SFF
+
+comment "SFF controllers with custom DMA interface"
+
+config PDC_ADMA
+ tristate "Pacific Digital ADMA support"
+ depends on PCI
+ help
+ This option enables support for Pacific Digital ADMA controllers
+
+ If unsure, say N.
+
+config PATA_OCTEON_CF
+ tristate "OCTEON Boot Bus Compact Flash support"
+ depends on CAVIUM_OCTEON_SOC
+ select PATA_TIMINGS
+ help
+ This option enables a polled compact flash driver for use with
+ compact flash cards attached to the OCTEON boot bus.
+
+ If unsure, say N.
+
+config SATA_QSTOR
+ tristate "Pacific Digital SATA QStor support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for Pacific Digital Serial ATA QStor.
+
+ If unsure, say N.
+
+config SATA_SX4
+ tristate "Promise SATA SX4 support (Experimental)"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for Promise Serial ATA SX4.
+
+ If unsure, say N.
+
+config ATA_BMDMA
+ bool "ATA BMDMA support"
+ depends on HAS_DMA
+ default y
+ help
+ This option adds support for SFF ATA controllers with BMDMA
+ capability. BMDMA stands for bus-master DMA and is the
+ de facto DMA interface for SFF controllers.
+
+ If unsure, say Y.
+
+if ATA_BMDMA
+
+comment "SATA SFF controllers with BMDMA"
+
+config ATA_PIIX
+ tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for ICH5/6/7/8 Serial ATA
+ and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
+ host controllers.
+
+ If unsure, say N.
+
+config SATA_DWC
+ tristate "DesignWare Cores SATA support"
+ depends on DMADEVICES
+ select GENERIC_PHY
+ select SATA_HOST
+ help
+ This option enables support for the on-chip SATA controller of the
+ AppliedMicro processor 460EX.
+
+ If unsure, say N.
+
+config SATA_DWC_OLD_DMA
+ bool "Support old device trees"
+ depends on SATA_DWC
+ select DW_DMAC_CORE
+ default y if 460EX
+ help
+ This option enables support for old device trees without the
+ "dmas" property.
+
+config SATA_HIGHBANK
+ tristate "Calxeda Highbank SATA support"
+ depends on ARCH_HIGHBANK || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for the Calxeda Highbank SoC's
+ onboard SATA.
+
+ If unsure, say N.
+
+config SATA_MV
+ tristate "Marvell SATA support"
+ depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
+ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
+ select GENERIC_PHY
+ select SATA_HOST
+ help
+ This option enables support for the Marvell Serial ATA family.
+ Currently supports 88SX[56]0[48][01] PCI(-X) chips,
+ as well as the newer [67]042 PCI-X/PCIe and SOC devices.
+
+ If unsure, say N.
+
+config SATA_NV
+ tristate "NVIDIA SATA support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for NVIDIA Serial ATA.
+
+ If unsure, say N.
+
+config SATA_PROMISE
+ tristate "Promise SATA TX2/TX4 support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for Promise Serial ATA TX2/TX4.
+
+ If unsure, say N.
+
+config SATA_RCAR
+ tristate "Renesas R-Car SATA support"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select SATA_HOST
+ help
+ This option enables support for Renesas R-Car Serial ATA.
+
+ If unsure, say N.
+
+config SATA_SIL
+ tristate "Silicon Image SATA support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for Silicon Image Serial ATA.
+
+ If unsure, say N.
+
+config SATA_SIS
+ tristate "SiS 964/965/966/180 SATA support"
+ depends on PCI
+ select PATA_SIS
+ select SATA_HOST
+ help
+ This option enables support for SiS Serial ATA on
+ SiS 964/965/966/180 and Parallel ATA on SiS 180.
+ The PATA support for SiS 180 requires additionally to
+ enable the PATA_SIS driver in the config.
+ If unsure, say N.
+
+config SATA_SVW
+ tristate "ServerWorks Frodo / Apple K2 SATA support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for Broadcom/Serverworks/Apple K2
+ SATA support.
+
+ If unsure, say N.
+
+config SATA_ULI
+ tristate "ULi Electronics SATA support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for ULi Electronics SATA.
+
+ If unsure, say N.
+
+config SATA_VIA
+ tristate "VIA SATA support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for VIA Serial ATA.
+
+ If unsure, say N.
+
+config SATA_VITESSE
+ tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
+ depends on PCI
+ select SATA_HOST
+ help
+ This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
+
+ If unsure, say N.
+
+comment "PATA SFF controllers with BMDMA"
+
+config PATA_ALI
+ tristate "ALi PATA support"
+ depends on PCI
+ select PATA_TIMINGS
+ help
+ This option enables support for the ALi ATA interfaces
+ found on the many ALi chipsets.
+
+ If unsure, say N.
+
+config PATA_AMD
+ tristate "AMD/NVidia PATA support"
+ depends on PCI
+ select PATA_TIMINGS
+ help
+ This option enables support for the AMD and NVidia PATA
+ interfaces found on the chipsets for Athlon/Athlon64.
+
+ If unsure, say N.
+
+config PATA_ARASAN_CF
+ tristate "ARASAN CompactFlash PATA Controller Support"
+ depends on ARCH_SPEAR13XX || COMPILE_TEST
+ depends on DMADEVICES
+ select DMA_ENGINE
+ help
+ Say Y here to support the ARASAN CompactFlash PATA controller
+
+config PATA_ARTOP
+ tristate "ARTOP 6210/6260 PATA support"
+ depends on PCI
+ help
+ This option enables support for ARTOP PATA controllers.
+
+ If unsure, say N.
+
+config PATA_ATIIXP
+ tristate "ATI PATA support"
+ depends on PCI
+ help
+ This option enables support for the ATI ATA interfaces
+ found on the many ATI chipsets.
+
+ If unsure, say N.
+
+config PATA_ATP867X
+ tristate "ARTOP/Acard ATP867X PATA support"
+ depends on PCI
+ select PATA_TIMINGS
+ help
+ This option enables support for ARTOP/Acard ATP867X PATA
+ controllers.
+
+ If unsure, say N.
+
+config PATA_BK3710
+ tristate "Palmchip BK3710 PATA support"
+ depends on ARCH_DAVINCI || COMPILE_TEST
+ select PATA_TIMINGS
+ help
+ This option enables support for the integrated IDE controller on
+ the TI DaVinci SoC.
+
+ If unsure, say N.
+
+config PATA_CMD64X
+ tristate "CMD64x PATA support"
+ depends on PCI
+ select PATA_TIMINGS
+ help
+ This option enables support for the CMD64x series chips
+ except for the CMD640.
+
+ If unsure, say N.
+
+config PATA_CS5520
+ tristate "CS5510/5520 PATA support"
+ depends on PCI && (X86_32 || COMPILE_TEST)
+ help
+ This option enables support for the Cyrix 5510/5520
+ companion chip used with the MediaGX/Geode processor family.
+
+ If unsure, say N.
+
+config PATA_CS5530
+ tristate "CS5530 PATA support"
+ depends on PCI && (X86_32 || COMPILE_TEST)
+ help
+ This option enables support for the Cyrix/NatSemi/AMD CS5530
+ companion chip used with the MediaGX/Geode processor family.
+
+ If unsure, say N.
+
+config PATA_CS5535
+ tristate "CS5535 PATA support (Experimental)"
+ depends on PCI && (X86_32 || (X86_64 && COMPILE_TEST))
+ depends on !UML
+ help
+ This option enables support for the NatSemi/AMD CS5535
+ companion chip used with the Geode processor family.
+
+ If unsure, say N.
+
+config PATA_CS5536
+ tristate "CS5536 PATA support"
+ depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
+ help
+ This option enables support for the AMD CS5536
+ companion chip used with the Geode LX processor family.
+
+ If unsure, say N.
+
+config PATA_CYPRESS
+ tristate "Cypress CY82C693 PATA support (Very Experimental)"
+ depends on PCI
+ select PATA_TIMINGS
+ help
+ This option enables support for the Cypress/Contaq CY82C693
+ chipset found in some Alpha systems
+
+ If unsure, say N.
+
+config PATA_EFAR
+ tristate "EFAR SLC90E66 support"
+ depends on PCI
+ help
+ This option enables support for the EFAR SLC90E66
+ IDE controller found on some older machines.
+
+ If unsure, say N.
+
+config PATA_EP93XX
+ tristate "Cirrus Logic EP93xx PATA support"
+ depends on ARCH_EP93XX
+ select PATA_TIMINGS
+ help
+ This option enables support for the PATA controller in
+ the Cirrus Logic EP9312 and EP9315 ARM CPU.
+
+ If unsure, say N.
+
+config PATA_FTIDE010
+ tristate "Faraday Technology FTIDE010 PATA support"
+ depends on OF
+ depends on ARM || COMPILE_TEST
+ depends on SATA_GEMINI
+ help
+ This option enables support for the Faraday FTIDE010
+ PATA controller found in the Cortina Gemini SoCs.
+
+ If unsure, say N.
+
+config PATA_HPT366
+ tristate "HPT 366/368 PATA support"
+ depends on PCI
+ help
+ This option enables support for the HPT 366 and 368
+ PATA controllers via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_HPT37X
+ tristate "HPT 370/370A/371/372/374/302 PATA support"
+ depends on PCI
+ help
+ This option enables support for the majority of the later HPT
+ PATA controllers via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_HPT3X2N
+ tristate "HPT 371N/372N/302N PATA support"
+ depends on PCI
+ help
+ This option enables support for the N variant HPT PATA
+ controllers via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_HPT3X3
+ tristate "HPT 343/363 PATA support"
+ depends on PCI
+ help
+ This option enables support for the HPT 343/363
+ PATA controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_HPT3X3_DMA
+ bool "HPT 343/363 DMA support"
+ depends on PATA_HPT3X3
+ help
+ This option enables DMA support for the HPT343/363
+ controllers. Enable with care as there are still some
+ problems with DMA on this chipset.
+
+config PATA_ICSIDE
+ tristate "Acorn ICS PATA support"
+ depends on ARM && ARCH_ACORN
+ select PATA_TIMINGS
+ help
+ On Acorn systems, say Y here if you wish to use the ICS PATA
+ interface card. This is not required for ICS partition support.
+ If you are unsure, say N to this.
+
+config PATA_IMX
+ tristate "PATA support for Freescale iMX"
+ depends on ARCH_MXC || COMPILE_TEST
+ select PATA_TIMINGS
+ help
+ This option enables support for the PATA host available on Freescale
+ iMX SoCs.
+
+ If unsure, say N.
+
+config PATA_IT8213
+ tristate "IT8213 PATA support (Experimental)"
+ depends on PCI
+ help
+ This option enables support for the ITE 821 PATA
+ controllers via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_IT821X
+ tristate "IT8211/2 PATA support"
+ depends on PCI
+ help
+ This option enables support for the ITE 8211 and 8212
+ PATA controllers via the new ATA layer, including RAID
+ mode.
+
+ If unsure, say N.
+
+config PATA_JMICRON
+ tristate "JMicron PATA support"
+ depends on PCI
+ help
+ Enable support for the JMicron IDE controller, via the new
+ ATA layer.
+
+ If unsure, say N.
+
+config PATA_MACIO
+ tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
+ depends on PPC_PMAC
+ help
+ Most IDE capable PowerMacs have IDE busses driven by a variant
+ of this controller which is part of the Apple chipset used on
+ most PowerMac models. Some models have multiple busses using
+ different chipsets, though generally, MacIO is one of them.
+
+config PATA_MARVELL
+ tristate "Marvell PATA support via legacy mode"
+ depends on PCI
+ help
+ This option enables limited support for the Marvell 88SE61xx ATA
+ controllers. If you wish to use only the SATA ports then select
+ the AHCI driver alone. If you wish to the use the PATA port or
+ both SATA and PATA include this driver.
+
+ If unsure, say N.
+
+config PATA_MPC52xx
+ tristate "Freescale MPC52xx SoC internal IDE"
+ depends on PPC_MPC52xx && PPC_BESTCOMM
+ select PPC_BESTCOMM_ATA
+ help
+ This option enables support for integrated IDE controller
+ of the Freescale MPC52xx SoC.
+
+ If unsure, say N.
+
+config PATA_NETCELL
+ tristate "NETCELL Revolution RAID support"
+ depends on PCI
+ help
+ This option enables support for the Netcell Revolution RAID
+ PATA controller.
+
+ If unsure, say N.
+
+config PATA_NINJA32
+ tristate "Ninja32/Delkin Cardbus ATA support"
+ depends on PCI
+ help
+ This option enables support for the Ninja32, Delkin and
+ possibly other brands of Cardbus ATA adapter
+
+ If unsure, say N.
+
+config PATA_NS87415
+ tristate "Nat Semi NS87415 PATA support"
+ depends on PCI
+ select PATA_TIMINGS
+ help
+ This option enables support for the National Semiconductor
+ NS87415 PCI-IDE controller.
+
+ If unsure, say N.
+
+config PATA_OLDPIIX
+ tristate "Intel PATA old PIIX support"
+ depends on PCI
+ help
+ This option enables support for early PIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_OPTIDMA
+ tristate "OPTI FireStar PATA support (Very Experimental)"
+ depends on PCI
+ help
+ This option enables DMA/PIO support for the later OPTi
+ controllers found on some old motherboards and in some
+ laptops.
+
+ If unsure, say N.
+
+config PATA_PDC2027X
+ tristate "Promise PATA 2027x support"
+ depends on PCI
+ help
+ This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
+
+ If unsure, say N.
+
+config PATA_PDC_OLD
+ tristate "Older Promise PATA controller support"
+ depends on PCI
+ help
+ This option enables support for the Promise 20246, 20262, 20263,
+ 20265 and 20267 adapters.
+
+ If unsure, say N.
+
+config PATA_RADISYS
+ tristate "RADISYS 82600 PATA support (Experimental)"
+ depends on PCI
+ help
+ This option enables support for the RADISYS 82600
+ PATA controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_RDC
+ tristate "RDC PATA support"
+ depends on PCI
+ help
+ This option enables basic support for the later RDC PATA controllers
+ controllers via the new ATA layer. For the RDC 1010, you need to
+ enable the IT821X driver instead.
+
+ If unsure, say N.
+
+config PATA_SC1200
+ tristate "SC1200 PATA support"
+ depends on PCI && (X86_32 || COMPILE_TEST)
+ help
+ This option enables support for the NatSemi/AMD SC1200 SoC
+ companion chip used with the Geode processor family.
+
+ If unsure, say N.
+
+config PATA_SCH
+ tristate "Intel SCH PATA support"
+ depends on PCI
+ help
+ This option enables support for Intel SCH PATA on the Intel
+ SCH (US15W, US15L, UL11L) series host controllers.
+
+ If unsure, say N.
+
+config PATA_SERVERWORKS
+ tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
+ depends on PCI
+ help
+ This option enables support for the Serverworks OSB4/CSB5/CSB6 and
+ HT1000 PATA controllers, via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_SIL680
+ tristate "CMD / Silicon Image 680 PATA support"
+ depends on PCI
+ help
+ This option enables support for CMD / Silicon Image 680 PATA.
+
+ If unsure, say N.
+
+config PATA_SIS
+ tristate "SiS PATA support"
+ depends on PCI
+ help
+ This option enables support for SiS PATA controllers
+
+ If unsure, say N.
+
+config PATA_TOSHIBA
+ tristate "Toshiba Piccolo support (Experimental)"
+ depends on PCI
+ help
+ Support for the Toshiba Piccolo controllers. Currently only the
+ primary channel is supported by this driver.
+
+ If unsure, say N.
+
+config PATA_TRIFLEX
+ tristate "Compaq Triflex PATA support"
+ depends on PCI
+ help
+ Enable support for the Compaq 'Triflex' IDE controller as found
+ on many Compaq Pentium-Pro systems, via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_VIA
+ tristate "VIA PATA support"
+ depends on PCI
+ select PATA_TIMINGS
+ help
+ This option enables support for the VIA PATA interfaces
+ found on the many VIA chipsets.
+
+ If unsure, say N.
+
+config PATA_PXA
+ tristate "PXA DMA-capable PATA support"
+ depends on ARCH_PXA || COMPILE_TEST
+ help
+ This option enables support for harddrive attached to PXA CPU's bus.
+
+ NOTE: This driver utilizes PXA DMA controller, in case your hardware
+ is not capable of doing MWDMA, use pata_platform instead.
+
+ If unsure, say N.
+
+config PATA_WINBOND
+ tristate "Winbond SL82C105 PATA support"
+ depends on PCI
+ help
+ This option enables support for SL82C105 PATA devices found in the
+ Netwinder and some other systems
+
+ If unsure, say N.
+
+endif # ATA_BMDMA
+
+comment "PIO-only SFF controllers"
+
+config PATA_CMD640_PCI
+ tristate "CMD640 PCI PATA support (Experimental)"
+ depends on PCI
+ select PATA_TIMINGS
+ help
+ This option enables support for the CMD640 PCI IDE
+ interface chip. Only the primary channel is currently
+ supported.
+
+ If unsure, say N.
+
+config PATA_FALCON
+ tristate "Atari Falcon and Q40/Q60 PATA support"
+ depends on M68K && (ATARI || Q40)
+ help
+ This option enables support for the on-board IDE
+ interface on the Atari Falcon and Q40/Q60.
+
+ If unsure, say N.
+
+config PATA_GAYLE
+ tristate "Amiga Gayle PATA support"
+ depends on M68K && AMIGA
+ help
+ This option enables support for the on-board IDE
+ interfaces on some Amiga models (A600, A1200,
+ A4000 and A4000T) and also for IDE interfaces on
+ the Zorro expansion bus (M-Tech E-Matrix 530
+ expansion card).
+
+ If unsure, say N.
+
+config PATA_BUDDHA
+ tristate "Buddha/Catweasel/X-Surf PATA support"
+ depends on ZORRO
+ help
+ This option enables support for the IDE interfaces
+ on the Buddha, Catweasel and X-Surf expansion boards
+ on the Zorro expansion bus. It supports up to two
+ interfaces on the Buddha, three on the Catweasel and
+ two on the X-Surf.
+
+ If unsure, say N.
+
+config PATA_ISAPNP
+ tristate "ISA Plug and Play PATA support"
+ depends on ISAPNP
+ help
+ This option enables support for ISA plug & play ATA
+ controllers such as those found on old soundcards.
+
+ If unsure, say N.
+
+config PATA_IXP4XX_CF
+ tristate "IXP4XX Compact Flash support"
+ depends on ARCH_IXP4XX || COMPILE_TEST
+ help
+ This option enables support for a Compact Flash connected on
+ the ixp4xx expansion bus. This driver had been written for
+ Loft/Avila boards in mind but can work with others.
+
+ If unsure, say N.
+
+config PATA_MPIIX
+ tristate "Intel PATA MPIIX support"
+ depends on PCI
+ help
+ This option enables support for MPIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_NS87410
+ tristate "Nat Semi NS87410 PATA support"
+ depends on PCI
+ select PATA_TIMINGS
+ help
+ This option enables support for the National Semiconductor
+ NS87410 PCI-IDE controller.
+
+ If unsure, say N.
+
+config PATA_OPTI
+ tristate "OPTI621/6215 PATA support (Very Experimental)"
+ depends on PCI
+ help
+ This option enables full PIO support for the early Opti ATA
+ controllers found on some old motherboards.
+
+ If unsure, say N.
+
+config PATA_PALMLD
+ tristate "Palm LifeDrive PATA support"
+ depends on MACH_PALMLD
+ help
+ This option enables support for Palm LifeDrive's internal ATA
+ port via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_PCMCIA
+ tristate "PCMCIA PATA support"
+ depends on PCMCIA
+ help
+ This option enables support for PCMCIA ATA interfaces, including
+ compact flash card adapters via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_PLATFORM
+ tristate "Generic platform device PATA support" if HAVE_PATA_PLATFORM
+ help
+ This option enables support for generic directly connected ATA
+ devices commonly found on embedded systems.
+
+ If unsure, say N.
+
+config PATA_OF_PLATFORM
+ tristate "OpenFirmware platform device PATA support"
+ depends on OF
+ select PATA_PLATFORM
+ help
+ This option enables support for generic directly connected ATA
+ devices commonly found on embedded systems with OpenFirmware
+ bindings.
+
+ If unsure, say N.
+
+config PATA_QDI
+ tristate "QDI VLB PATA support"
+ depends on ISA
+ select PATA_LEGACY
+ help
+ Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
+
+config PATA_RB532
+ tristate "RouterBoard 532 PATA CompactFlash support"
+ depends on MIKROTIK_RB532
+ help
+ This option enables support for the RouterBoard 532
+ PATA CompactFlash controller.
+
+ If unsure, say N.
+
+config PATA_RZ1000
+ tristate "PC Tech RZ1000 PATA support"
+ depends on PCI
+ help
+ This option enables basic support for the PC Tech RZ1000/1
+ PATA controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_SAMSUNG_CF
+ tristate "Samsung SoC PATA support"
+ depends on SAMSUNG_DEV_IDE || COMPILE_TEST
+ select PATA_TIMINGS
+ help
+ This option enables basic support for Samsung's S3C/S5P board
+ PATA controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_WINBOND_VLB
+ tristate "Winbond W83759A VLB PATA support (Experimental)"
+ depends on ISA
+ select PATA_LEGACY
+ help
+ Support for the Winbond W83759A controller on Vesa Local Bus
+ systems.
+
+comment "Generic fallback / legacy drivers"
+
+config PATA_ACPI
+ tristate "ACPI firmware driver for PATA"
+ depends on ATA_ACPI && ATA_BMDMA && PCI
+ select PATA_TIMINGS
+ help
+ This option enables an ACPI method driver which drives
+ motherboard PATA controller interfaces through the ACPI
+ firmware in the BIOS. This driver can sometimes handle
+ otherwise unsupported hardware.
+
+config ATA_GENERIC
+ tristate "Generic ATA support"
+ depends on PCI && ATA_BMDMA
+ select SATA_HOST
+ help
+ This option enables support for generic BIOS configured
+ ATA controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_LEGACY
+ tristate "Legacy ISA PATA support (Experimental)"
+ depends on (ISA || PCI)
+ select PATA_TIMINGS
+ help
+ This option enables support for ISA/VLB/PCI bus legacy PATA
+ ports and allows them to be accessed via the new ATA layer.
+
+ If unsure, say N.
+
+endif # ATA_SFF
+endif # ATA