summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_via.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_via.c')
-rw-r--r--drivers/ata/pata_via.c708
1 files changed, 708 insertions, 0 deletions
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
new file mode 100644
index 000000000..34f00f389
--- /dev/null
+++ b/drivers/ata/pata_via.c
@@ -0,0 +1,708 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pata_via.c - VIA PATA for new ATA layer
+ * (C) 2005-2006 Red Hat Inc
+ *
+ * Documentation
+ * Most chipset documentation available under NDA only
+ *
+ * VIA version guide
+ * VIA VT82C561 - early design, uses ata_generic currently
+ * VIA VT82C576 - MWDMA, 33Mhz
+ * VIA VT82C586 - MWDMA, 33Mhz
+ * VIA VT82C586a - Added UDMA to 33Mhz
+ * VIA VT82C586b - UDMA33
+ * VIA VT82C596a - Nonfunctional UDMA66
+ * VIA VT82C596b - Working UDMA66
+ * VIA VT82C686 - Nonfunctional UDMA66
+ * VIA VT82C686a - Working UDMA66
+ * VIA VT82C686b - Updated to UDMA100
+ * VIA VT8231 - UDMA100
+ * VIA VT8233 - UDMA100
+ * VIA VT8233a - UDMA133
+ * VIA VT8233c - UDMA100
+ * VIA VT8235 - UDMA133
+ * VIA VT8237 - UDMA133
+ * VIA VT8237A - UDMA133
+ * VIA VT8237S - UDMA133
+ * VIA VT8251 - UDMA133
+ *
+ * Most registers remain compatible across chips. Others start reserved
+ * and acquire sensible semantics if set to 1 (eg cable detect). A few
+ * exceptions exist, notably around the FIFO settings.
+ *
+ * One additional quirk of the VIA design is that like ALi they use few
+ * PCI IDs for a lot of chips.
+ *
+ * Based heavily on:
+ *
+ * Version 3.38
+ *
+ * VIA IDE driver for Linux. Supported southbridges:
+ *
+ * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
+ * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
+ * vt8235, vt8237
+ *
+ * Copyright (c) 2000-2002 Vojtech Pavlik
+ *
+ * Based on the work of:
+ * Michel Aubry
+ * Jeff Garzik
+ * Andre Hedrick
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME "pata_via"
+#define DRV_VERSION "0.3.4"
+
+enum {
+ VIA_BAD_PREQ = 0x01, /* Crashes if PREQ# till DDACK# set */
+ VIA_BAD_CLK66 = 0x02, /* 66 MHz clock doesn't work correctly */
+ VIA_SET_FIFO = 0x04, /* Needs to have FIFO split set */
+ VIA_NO_UNMASK = 0x08, /* Doesn't work with IRQ unmasking on */
+ VIA_BAD_ID = 0x10, /* Has wrong vendor ID (0x1107) */
+ VIA_BAD_AST = 0x20, /* Don't touch Address Setup Timing */
+ VIA_NO_ENABLES = 0x40, /* Has no enablebits */
+ VIA_SATA_PATA = 0x80, /* SATA/PATA combined configuration */
+};
+
+enum {
+ VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */
+};
+
+/*
+ * VIA SouthBridge chips.
+ */
+
+static const struct via_isa_bridge {
+ const char *name;
+ u16 id;
+ u8 rev_min;
+ u8 rev_max;
+ u8 udma_mask;
+ u8 flags;
+} via_isa_bridges[] = {
+ { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
+ { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
+ { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
+ { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES },
+ { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES },
+ { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, },
+ { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, },
+ { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+ { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, },
+ { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+ { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { NULL }
+};
+
+static const struct dmi_system_id no_atapi_dma_dmi_table[] = {
+ {
+ .ident = "AVERATEC 3200",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AVERATEC"),
+ DMI_MATCH(DMI_BOARD_NAME, "3200"),
+ },
+ },
+ { }
+};
+
+struct via_port {
+ u8 cached_device;
+};
+
+/*
+ * Cable special cases
+ */
+
+static const struct dmi_system_id cable_dmi_table[] = {
+ {
+ .ident = "Acer Ferrari 3400",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
+ DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
+ },
+ },
+ { }
+};
+
+static int via_cable_override(struct pci_dev *pdev)
+{
+ /* Systems by DMI */
+ if (dmi_check_system(cable_dmi_table))
+ return 1;
+ /* Arima W730-K8/Targa Visionary 811/... */
+ if (pdev->subsystem_vendor == 0x161F && pdev->subsystem_device == 0x2032)
+ return 1;
+ return 0;
+}
+
+
+/**
+ * via_cable_detect - cable detection
+ * @ap: ATA port
+ *
+ * Perform cable detection. Actually for the VIA case the BIOS
+ * already did this for us. We read the values provided by the
+ * BIOS. If you are using an 8235 in a non-PC configuration you
+ * may need to update this code.
+ *
+ * Hotplug also impacts on this.
+ */
+
+static int via_cable_detect(struct ata_port *ap) {
+ const struct via_isa_bridge *config = ap->host->private_data;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u32 ata66;
+
+ if (via_cable_override(pdev))
+ return ATA_CBL_PATA40_SHORT;
+
+ if ((config->flags & VIA_SATA_PATA) && ap->port_no == 0)
+ return ATA_CBL_SATA;
+
+ /* Early chips are 40 wire */
+ if (config->udma_mask < ATA_UDMA4)
+ return ATA_CBL_PATA40;
+ /* UDMA 66 chips have only drive side logic */
+ else if (config->udma_mask < ATA_UDMA5)
+ return ATA_CBL_PATA_UNK;
+ /* UDMA 100 or later */
+ pci_read_config_dword(pdev, 0x50, &ata66);
+ /* Check both the drive cable reporting bits, we might not have
+ two drives */
+ if (ata66 & (0x10100000 >> (16 * ap->port_no)))
+ return ATA_CBL_PATA80;
+ /* Check with ACPI so we can spot BIOS reported SATA bridges */
+ if (ata_acpi_init_gtm(ap) &&
+ ata_acpi_cbl_80wire(ap, ata_acpi_init_gtm(ap)))
+ return ATA_CBL_PATA80;
+ return ATA_CBL_PATA40;
+}
+
+static int via_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ const struct via_isa_bridge *config = ap->host->private_data;
+
+ if (!(config->flags & VIA_NO_ENABLES)) {
+ static const struct pci_bits via_enable_bits[] = {
+ { 0x40, 1, 0x02, 0x02 },
+ { 0x40, 1, 0x01, 0x01 }
+ };
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no]))
+ return -ENOENT;
+ }
+
+ return ata_sff_prereset(link, deadline);
+}
+
+
+/**
+ * via_do_set_mode - set transfer mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ * @mode: ATA mode being programmed
+ * @set_ast: Set to program address setup
+ * @udma_type: UDMA mode/format of registers
+ *
+ * Program the VIA registers for DMA and PIO modes. Uses the ata timing
+ * support in order to compute modes.
+ *
+ * FIXME: Hotplug will require we serialize multiple mode changes
+ * on the two channels.
+ */
+
+static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev,
+ int mode, int set_ast, int udma_type)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct ata_device *peer = ata_dev_pair(adev);
+ struct ata_timing t, p;
+ const int via_clock = 33333; /* Bus clock in kHz */
+ const int T = 1000000000 / via_clock;
+ int UT = T;
+ int ut;
+ int offset = 3 - (2*ap->port_no) - adev->devno;
+
+ switch (udma_type) {
+ case ATA_UDMA4:
+ UT = T / 2; break;
+ case ATA_UDMA5:
+ UT = T / 3; break;
+ case ATA_UDMA6:
+ UT = T / 4; break;
+ }
+
+ /* Calculate the timing values we require */
+ ata_timing_compute(adev, mode, &t, T, UT);
+
+ /* We share 8bit timing so we must merge the constraints */
+ if (peer) {
+ if (peer->pio_mode) {
+ ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
+ ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
+ }
+ }
+
+ /* Address setup is programmable but breaks on UDMA133 setups */
+ if (set_ast) {
+ u8 setup; /* 2 bits per drive */
+ int shift = 2 * offset;
+
+ pci_read_config_byte(pdev, 0x4C, &setup);
+ setup &= ~(3 << shift);
+ setup |= (clamp_val(t.setup, 1, 4) - 1) << shift;
+ pci_write_config_byte(pdev, 0x4C, setup);
+ }
+
+ /* Load the PIO mode bits */
+ pci_write_config_byte(pdev, 0x4F - ap->port_no,
+ ((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1));
+ pci_write_config_byte(pdev, 0x48 + offset,
+ ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1));
+
+ /* Load the UDMA bits according to type */
+ switch (udma_type) {
+ case ATA_UDMA2:
+ default:
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03;
+ break;
+ case ATA_UDMA4:
+ ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f;
+ break;
+ case ATA_UDMA5:
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
+ break;
+ case ATA_UDMA6:
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
+ break;
+ }
+
+ /* Set UDMA unless device is not UDMA capable */
+ if (udma_type) {
+ u8 udma_etc;
+
+ pci_read_config_byte(pdev, 0x50 + offset, &udma_etc);
+
+ /* clear transfer mode bit */
+ udma_etc &= ~0x20;
+
+ if (t.udma) {
+ /* preserve 80-wire cable detection bit */
+ udma_etc &= 0x10;
+ udma_etc |= ut;
+ }
+
+ pci_write_config_byte(pdev, 0x50 + offset, udma_etc);
+ }
+}
+
+static void via_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ const struct via_isa_bridge *config = ap->host->private_data;
+ int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
+
+ via_do_set_mode(ap, adev, adev->pio_mode, set_ast, config->udma_mask);
+}
+
+static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ const struct via_isa_bridge *config = ap->host->private_data;
+ int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
+
+ via_do_set_mode(ap, adev, adev->dma_mode, set_ast, config->udma_mask);
+}
+
+/**
+ * via_mode_filter - filter buggy device/mode pairs
+ * @dev: ATA device
+ * @mask: Mode bitmask
+ *
+ * We need to apply some minimal filtering for old controllers and at least
+ * one breed of Transcend SSD. Return the updated mask.
+ */
+
+static unsigned int via_mode_filter(struct ata_device *dev, unsigned int mask)
+{
+ struct ata_host *host = dev->link->ap->host;
+ const struct via_isa_bridge *config = host->private_data;
+ unsigned char model_num[ATA_ID_PROD_LEN + 1];
+
+ if (config->id == PCI_DEVICE_ID_VIA_82C586_0) {
+ ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
+ if (strcmp(model_num, "TS64GSSD25-M") == 0) {
+ ata_dev_warn(dev,
+ "disabling UDMA mode due to reported lockups with this device\n");
+ mask &= ~ ATA_MASK_UDMA;
+ }
+ }
+
+ if (dev->class == ATA_DEV_ATAPI &&
+ dmi_check_system(no_atapi_dma_dmi_table)) {
+ ata_dev_warn(dev, "controller locks up on ATAPI DMA, forcing PIO\n");
+ mask &= ATA_MASK_PIO;
+ }
+
+ return mask;
+}
+
+/**
+ * via_tf_load - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller.
+ *
+ * Note: This is to fix the internal bug of via chipsets, which
+ * will reset the device register after changing the IEN bit on
+ * ctl register
+ */
+static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ struct via_port *vp = ap->private_data;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+ int newctl = 0;
+
+ if (tf->ctl != ap->last_ctl) {
+ iowrite8(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ newctl = 1;
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ iowrite8(tf->device, ioaddr->device_addr);
+ vp->cached_device = tf->device;
+ } else if (newctl)
+ iowrite8(vp->cached_device, ioaddr->device_addr);
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ WARN_ON_ONCE(!ioaddr->ctl_addr);
+ iowrite8(tf->hob_feature, ioaddr->feature_addr);
+ iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+ iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+ iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+ iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
+ }
+
+ if (is_addr) {
+ iowrite8(tf->feature, ioaddr->feature_addr);
+ iowrite8(tf->nsect, ioaddr->nsect_addr);
+ iowrite8(tf->lbal, ioaddr->lbal_addr);
+ iowrite8(tf->lbam, ioaddr->lbam_addr);
+ iowrite8(tf->lbah, ioaddr->lbah_addr);
+ }
+
+ ata_wait_idle(ap);
+}
+
+static int via_port_start(struct ata_port *ap)
+{
+ struct via_port *vp;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ int ret = ata_bmdma_port_start(ap);
+ if (ret < 0)
+ return ret;
+
+ vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL);
+ if (vp == NULL)
+ return -ENOMEM;
+ ap->private_data = vp;
+ return 0;
+}
+
+static struct scsi_host_template via_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations via_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = via_cable_detect,
+ .set_piomode = via_set_piomode,
+ .set_dmamode = via_set_dmamode,
+ .prereset = via_pre_reset,
+ .sff_tf_load = via_tf_load,
+ .port_start = via_port_start,
+ .mode_filter = via_mode_filter,
+};
+
+static struct ata_port_operations via_port_ops_noirq = {
+ .inherits = &via_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer32,
+};
+
+/**
+ * via_config_fifo - set up the FIFO
+ * @pdev: PCI device
+ * @flags: configuration flags
+ *
+ * Set the FIFO properties for this device if necessary. Used both on
+ * set up and on and the resume path
+ */
+
+static void via_config_fifo(struct pci_dev *pdev, unsigned int flags)
+{
+ u8 enable;
+
+ /* 0x40 low bits indicate enabled channels */
+ pci_read_config_byte(pdev, 0x40 , &enable);
+ enable &= 3;
+
+ if (flags & VIA_SET_FIFO) {
+ static const u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
+ u8 fifo;
+
+ pci_read_config_byte(pdev, 0x43, &fifo);
+
+ /* Clear PREQ# until DDACK# for errata */
+ if (flags & VIA_BAD_PREQ)
+ fifo &= 0x7F;
+ else
+ fifo &= 0x9f;
+ /* Turn on FIFO for enabled channels */
+ fifo |= fifo_setting[enable];
+ pci_write_config_byte(pdev, 0x43, fifo);
+ }
+}
+
+static void via_fixup(struct pci_dev *pdev, const struct via_isa_bridge *config)
+{
+ u32 timing;
+
+ /* Initialise the FIFO for the enabled channels. */
+ via_config_fifo(pdev, config->flags);
+
+ if (config->udma_mask == ATA_UDMA4) {
+ /* The 66 MHz devices require we enable the clock */
+ pci_read_config_dword(pdev, 0x50, &timing);
+ timing |= 0x80008;
+ pci_write_config_dword(pdev, 0x50, timing);
+ }
+ if (config->flags & VIA_BAD_CLK66) {
+ /* Disable the 66MHz clock on problem devices */
+ pci_read_config_dword(pdev, 0x50, &timing);
+ timing &= ~0x80008;
+ pci_write_config_dword(pdev, 0x50, timing);
+ }
+}
+
+/**
+ * via_init_one - discovery callback
+ * @pdev: PCI device
+ * @id: PCI table info
+ *
+ * A VIA IDE interface has been discovered. Figure out what revision
+ * and perform configuration work before handing it to the ATA layer
+ */
+
+static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ /* Early VIA without UDMA support */
+ static const struct ata_port_info via_mwdma_info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .port_ops = &via_port_ops
+ };
+ /* Ditto with IRQ masking required */
+ static const struct ata_port_info via_mwdma_info_borked = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .port_ops = &via_port_ops_noirq,
+ };
+ /* VIA UDMA 33 devices (and borked 66) */
+ static const struct ata_port_info via_udma33_info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
+ .port_ops = &via_port_ops
+ };
+ /* VIA UDMA 66 devices */
+ static const struct ata_port_info via_udma66_info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
+ .port_ops = &via_port_ops
+ };
+ /* VIA UDMA 100 devices */
+ static const struct ata_port_info via_udma100_info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &via_port_ops
+ };
+ /* UDMA133 with bad AST (All current 133) */
+ static const struct ata_port_info via_udma133_info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */
+ .port_ops = &via_port_ops
+ };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
+ struct pci_dev *isa;
+ const struct via_isa_bridge *config;
+ u8 enable;
+ unsigned long flags = id->driver_data;
+ int rc;
+
+ ata_print_version_once(&pdev->dev, DRV_VERSION);
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ if (flags & VIA_IDFLAG_SINGLE)
+ ppi[1] = &ata_dummy_port_info;
+
+ /* To find out how the IDE will behave and what features we
+ actually have to look at the bridge not the IDE controller */
+ for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON;
+ config++)
+ if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
+ !!(config->flags & VIA_BAD_ID),
+ config->id, NULL))) {
+ u8 rev = isa->revision;
+ pci_dev_put(isa);
+
+ if ((id->device == 0x0415 || id->device == 0x3164) &&
+ (config->id != id->device))
+ continue;
+
+ if (rev >= config->rev_min && rev <= config->rev_max)
+ break;
+ }
+
+ if (!(config->flags & VIA_NO_ENABLES)) {
+ /* 0x40 low bits indicate enabled channels */
+ pci_read_config_byte(pdev, 0x40 , &enable);
+ enable &= 3;
+ if (enable == 0)
+ return -ENODEV;
+ }
+
+ /* Clock set up */
+ switch (config->udma_mask) {
+ case 0x00:
+ if (config->flags & VIA_NO_UNMASK)
+ ppi[0] = &via_mwdma_info_borked;
+ else
+ ppi[0] = &via_mwdma_info;
+ break;
+ case ATA_UDMA2:
+ ppi[0] = &via_udma33_info;
+ break;
+ case ATA_UDMA4:
+ ppi[0] = &via_udma66_info;
+ break;
+ case ATA_UDMA5:
+ ppi[0] = &via_udma100_info;
+ break;
+ case ATA_UDMA6:
+ ppi[0] = &via_udma133_info;
+ break;
+ default:
+ WARN_ON(1);
+ return -ENODEV;
+ }
+
+ via_fixup(pdev, config);
+
+ /* We have established the device type, now fire it up */
+ return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * via_reinit_one - reinit after resume
+ * @pdev: PCI device
+ *
+ * Called when the VIA PATA device is resumed. We must then
+ * reconfigure the fifo and other setup we may have altered. In
+ * addition the kernel needs to have the resume methods on PCI
+ * quirk supported.
+ */
+
+static int via_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = pci_get_drvdata(pdev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ via_fixup(pdev, host->private_data);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
+static const struct pci_device_id via[] = {
+ { PCI_VDEVICE(VIA, 0x0415), },
+ { PCI_VDEVICE(VIA, 0x0571), },
+ { PCI_VDEVICE(VIA, 0x0581), },
+ { PCI_VDEVICE(VIA, 0x1571), },
+ { PCI_VDEVICE(VIA, 0x3164), },
+ { PCI_VDEVICE(VIA, 0x5324), },
+ { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
+ { PCI_VDEVICE(VIA, 0x9001), VIA_IDFLAG_SINGLE },
+
+ { },
+};
+
+static struct pci_driver via_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = via,
+ .probe = via_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = via_reinit_one,
+#endif
+};
+
+module_pci_driver(via_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for VIA PATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, via);
+MODULE_VERSION(DRV_VERSION);