summaryrefslogtreecommitdiffstats
path: root/drivers/edac/i82860_edac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/edac/i82860_edac.c')
-rw-r--r--drivers/edac/i82860_edac.c363
1 files changed, 363 insertions, 0 deletions
diff --git a/drivers/edac/i82860_edac.c b/drivers/edac/i82860_edac.c
new file mode 100644
index 000000000..fbec90d00
--- /dev/null
+++ b/drivers/edac/i82860_edac.c
@@ -0,0 +1,363 @@
+/*
+ * Intel 82860 Memory Controller kernel module
+ * (C) 2005 Red Hat (http://www.redhat.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Ben Woodard <woodard@redhat.com>
+ * shamelessly copied from and based upon the edac_i82875 driver
+ * by Thayne Harbaugh of Linux Networx. (http://lnxi.com)
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR "i82860_edac"
+
+#define i82860_printk(level, fmt, arg...) \
+ edac_printk(level, "i82860", fmt, ##arg)
+
+#define i82860_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "i82860", fmt, ##arg)
+
+#ifndef PCI_DEVICE_ID_INTEL_82860_0
+#define PCI_DEVICE_ID_INTEL_82860_0 0x2531
+#endif /* PCI_DEVICE_ID_INTEL_82860_0 */
+
+#define I82860_MCHCFG 0x50
+#define I82860_GBA 0x60
+#define I82860_GBA_MASK 0x7FF
+#define I82860_GBA_SHIFT 24
+#define I82860_ERRSTS 0xC8
+#define I82860_EAP 0xE4
+#define I82860_DERRCTL_STS 0xE2
+
+enum i82860_chips {
+ I82860 = 0,
+};
+
+struct i82860_dev_info {
+ const char *ctl_name;
+};
+
+struct i82860_error_info {
+ u16 errsts;
+ u32 eap;
+ u16 derrsyn;
+ u16 errsts2;
+};
+
+static const struct i82860_dev_info i82860_devs[] = {
+ [I82860] = {
+ .ctl_name = "i82860"},
+};
+
+static struct pci_dev *mci_pdev; /* init dev: in case that AGP code
+ * has already registered driver
+ */
+static struct edac_pci_ctl_info *i82860_pci;
+
+static void i82860_get_error_info(struct mem_ctl_info *mci,
+ struct i82860_error_info *info)
+{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->pdev);
+
+ /*
+ * This is a mess because there is no atomic way to read all the
+ * registers at once and the registers can transition from CE being
+ * overwritten by UE.
+ */
+ pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts);
+ pci_read_config_dword(pdev, I82860_EAP, &info->eap);
+ pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn);
+ pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts2);
+
+ pci_write_bits16(pdev, I82860_ERRSTS, 0x0003, 0x0003);
+
+ /*
+ * If the error is the same for both reads then the first set of reads
+ * is valid. If there is a change then there is a CE no info and the
+ * second set of reads is valid and should be UE info.
+ */
+ if (!(info->errsts2 & 0x0003))
+ return;
+
+ if ((info->errsts ^ info->errsts2) & 0x0003) {
+ pci_read_config_dword(pdev, I82860_EAP, &info->eap);
+ pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn);
+ }
+}
+
+static int i82860_process_error_info(struct mem_ctl_info *mci,
+ struct i82860_error_info *info,
+ int handle_errors)
+{
+ struct dimm_info *dimm;
+ int row;
+
+ if (!(info->errsts2 & 0x0003))
+ return 0;
+
+ if (!handle_errors)
+ return 1;
+
+ if ((info->errsts ^ info->errsts2) & 0x0003) {
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+ -1, -1, -1, "UE overwrote CE", "");
+ info->errsts = info->errsts2;
+ }
+
+ info->eap >>= PAGE_SHIFT;
+ row = edac_mc_find_csrow_by_page(mci, info->eap);
+ dimm = mci->csrows[row]->channels[0]->dimm;
+
+ if (info->errsts & 0x0002)
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+ info->eap, 0, 0,
+ dimm->location[0], dimm->location[1], -1,
+ "i82860 UE", "");
+ else
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+ info->eap, 0, info->derrsyn,
+ dimm->location[0], dimm->location[1], -1,
+ "i82860 CE", "");
+
+ return 1;
+}
+
+static void i82860_check(struct mem_ctl_info *mci)
+{
+ struct i82860_error_info info;
+
+ i82860_get_error_info(mci, &info);
+ i82860_process_error_info(mci, &info, 1);
+}
+
+static void i82860_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev)
+{
+ unsigned long last_cumul_size;
+ u16 mchcfg_ddim; /* DRAM Data Integrity Mode 0=none, 2=edac */
+ u16 value;
+ u32 cumul_size;
+ struct csrow_info *csrow;
+ struct dimm_info *dimm;
+ int index;
+
+ pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim);
+ mchcfg_ddim = mchcfg_ddim & 0x180;
+ last_cumul_size = 0;
+
+ /* The group row boundary (GRA) reg values are boundary address
+ * for each DRAM row with a granularity of 16MB. GRA regs are
+ * cumulative; therefore GRA15 will contain the total memory contained
+ * in all eight rows.
+ */
+ for (index = 0; index < mci->nr_csrows; index++) {
+ csrow = mci->csrows[index];
+ dimm = csrow->channels[0]->dimm;
+
+ pci_read_config_word(pdev, I82860_GBA + index * 2, &value);
+ cumul_size = (value & I82860_GBA_MASK) <<
+ (I82860_GBA_SHIFT - PAGE_SHIFT);
+ edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
+
+ if (cumul_size == last_cumul_size)
+ continue; /* not populated */
+
+ csrow->first_page = last_cumul_size;
+ csrow->last_page = cumul_size - 1;
+ dimm->nr_pages = cumul_size - last_cumul_size;
+ last_cumul_size = cumul_size;
+ dimm->grain = 1 << 12; /* I82860_EAP has 4KiB reolution */
+ dimm->mtype = MEM_RMBS;
+ dimm->dtype = DEV_UNKNOWN;
+ dimm->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE;
+ }
+}
+
+static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ struct mem_ctl_info *mci;
+ struct edac_mc_layer layers[2];
+ struct i82860_error_info discard;
+
+ /*
+ * RDRAM has channels but these don't map onto the csrow abstraction.
+ * According with the datasheet, there are 2 Rambus channels, supporting
+ * up to 16 direct RDRAM devices.
+ * The device groups from the GRA registers seem to map reasonably
+ * well onto the notion of a chip select row.
+ * There are 16 GRA registers and since the name is associated with
+ * the channel and the GRA registers map to physical devices so we are
+ * going to make 1 channel for group.
+ */
+ layers[0].type = EDAC_MC_LAYER_CHANNEL;
+ layers[0].size = 2;
+ layers[0].is_virt_csrow = true;
+ layers[1].type = EDAC_MC_LAYER_SLOT;
+ layers[1].size = 8;
+ layers[1].is_virt_csrow = true;
+ mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
+ if (!mci)
+ return -ENOMEM;
+
+ edac_dbg(3, "init mci\n");
+ mci->pdev = &pdev->dev;
+ mci->mtype_cap = MEM_FLAG_DDR;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+ /* I"m not sure about this but I think that all RDRAM is SECDED */
+ mci->edac_cap = EDAC_FLAG_SECDED;
+ mci->mod_name = EDAC_MOD_STR;
+ mci->ctl_name = i82860_devs[dev_idx].ctl_name;
+ mci->dev_name = pci_name(pdev);
+ mci->edac_check = i82860_check;
+ mci->ctl_page_to_phys = NULL;
+ i82860_init_csrows(mci, pdev);
+ i82860_get_error_info(mci, &discard); /* clear counters */
+
+ /* Here we assume that we will never see multiple instances of this
+ * type of memory controller. The ID is therefore hardcoded to 0.
+ */
+ if (edac_mc_add_mc(mci)) {
+ edac_dbg(3, "failed edac_mc_add_mc()\n");
+ goto fail;
+ }
+
+ /* allocating generic PCI control info */
+ i82860_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+ if (!i82860_pci) {
+ printk(KERN_WARNING
+ "%s(): Unable to create PCI control\n",
+ __func__);
+ printk(KERN_WARNING
+ "%s(): PCI error report via EDAC not setup\n",
+ __func__);
+ }
+
+ /* get this far and it's successful */
+ edac_dbg(3, "success\n");
+
+ return 0;
+
+fail:
+ edac_mc_free(mci);
+ return -ENODEV;
+}
+
+/* returns count (>= 0), or negative on error */
+static int i82860_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int rc;
+
+ edac_dbg(0, "\n");
+ i82860_printk(KERN_INFO, "i82860 init one\n");
+
+ if (pci_enable_device(pdev) < 0)
+ return -EIO;
+
+ rc = i82860_probe1(pdev, ent->driver_data);
+
+ if (rc == 0)
+ mci_pdev = pci_dev_get(pdev);
+
+ return rc;
+}
+
+static void i82860_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+
+ edac_dbg(0, "\n");
+
+ if (i82860_pci)
+ edac_pci_release_generic_ctl(i82860_pci);
+
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+ return;
+
+ edac_mc_free(mci);
+}
+
+static const struct pci_device_id i82860_pci_tbl[] = {
+ {
+ PCI_VEND_DEV(INTEL, 82860_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ I82860},
+ {
+ 0,
+ } /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i82860_pci_tbl);
+
+static struct pci_driver i82860_driver = {
+ .name = EDAC_MOD_STR,
+ .probe = i82860_init_one,
+ .remove = i82860_remove_one,
+ .id_table = i82860_pci_tbl,
+};
+
+static int __init i82860_init(void)
+{
+ int pci_rc;
+
+ edac_dbg(3, "\n");
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ if ((pci_rc = pci_register_driver(&i82860_driver)) < 0)
+ goto fail0;
+
+ if (!mci_pdev) {
+ mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82860_0, NULL);
+
+ if (mci_pdev == NULL) {
+ edac_dbg(0, "860 pci_get_device fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+
+ pci_rc = i82860_init_one(mci_pdev, i82860_pci_tbl);
+
+ if (pci_rc < 0) {
+ edac_dbg(0, "860 init fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+ }
+
+ return 0;
+
+fail1:
+ pci_unregister_driver(&i82860_driver);
+
+fail0:
+ pci_dev_put(mci_pdev);
+ return pci_rc;
+}
+
+static void __exit i82860_exit(void)
+{
+ edac_dbg(3, "\n");
+ pci_unregister_driver(&i82860_driver);
+ pci_dev_put(mci_pdev);
+}
+
+module_init(i82860_init);
+module_exit(i82860_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com) "
+ "Ben Woodard <woodard@redhat.com>");
+MODULE_DESCRIPTION("ECC support for Intel 82860 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");