diff options
Diffstat (limited to 'drivers/extcon/extcon-max8997.c')
| -rw-r--r-- | drivers/extcon/extcon-max8997.c | 776 |
1 files changed, 776 insertions, 0 deletions
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c new file mode 100644 index 000000000..9cddf08e0 --- /dev/null +++ b/drivers/extcon/extcon-max8997.c @@ -0,0 +1,776 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// extcon-max8997.c - MAX8997 extcon driver to support MAX8997 MUIC +// +// Copyright (C) 2012 Samsung Electronics +// Donggeun Kim <dg77.kim@samsung.com> + +#include <linux/devm-helpers.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/kobject.h> +#include <linux/mfd/max8997.h> +#include <linux/mfd/max8997-private.h> +#include <linux/extcon-provider.h> +#include <linux/irqdomain.h> + +#define DEV_NAME "max8997-muic" +#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */ + +enum max8997_muic_adc_debounce_time { + ADC_DEBOUNCE_TIME_0_5MS = 0, /* 0.5ms */ + ADC_DEBOUNCE_TIME_10MS, /* 10ms */ + ADC_DEBOUNCE_TIME_25MS, /* 25ms */ + ADC_DEBOUNCE_TIME_38_62MS, /* 38.62ms */ +}; + +struct max8997_muic_irq { + unsigned int irq; + const char *name; + unsigned int virq; +}; + +static struct max8997_muic_irq muic_irqs[] = { + { MAX8997_MUICIRQ_ADCError, "muic-ADCERROR" }, + { MAX8997_MUICIRQ_ADCLow, "muic-ADCLOW" }, + { MAX8997_MUICIRQ_ADC, "muic-ADC" }, + { MAX8997_MUICIRQ_VBVolt, "muic-VBVOLT" }, + { MAX8997_MUICIRQ_DBChg, "muic-DBCHG" }, + { MAX8997_MUICIRQ_DCDTmr, "muic-DCDTMR" }, + { MAX8997_MUICIRQ_ChgDetRun, "muic-CHGDETRUN" }, + { MAX8997_MUICIRQ_ChgTyp, "muic-CHGTYP" }, + { MAX8997_MUICIRQ_OVP, "muic-OVP" }, + { MAX8997_PMICIRQ_CHGINS, "pmic-CHGINS" }, + { MAX8997_PMICIRQ_CHGRM, "pmic-CHGRM" }, +}; + +/* Define supported cable type */ +enum max8997_muic_acc_type { + MAX8997_MUIC_ADC_GROUND = 0x0, + MAX8997_MUIC_ADC_MHL, /* MHL*/ + MAX8997_MUIC_ADC_REMOTE_S1_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S2_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S3_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S4_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S5_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S6_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S7_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S8_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S9_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S10_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S11_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S12_BUTTON, + MAX8997_MUIC_ADC_RESERVED_ACC_1, + MAX8997_MUIC_ADC_RESERVED_ACC_2, + MAX8997_MUIC_ADC_RESERVED_ACC_3, + MAX8997_MUIC_ADC_RESERVED_ACC_4, + MAX8997_MUIC_ADC_RESERVED_ACC_5, + MAX8997_MUIC_ADC_CEA936_AUDIO, + MAX8997_MUIC_ADC_PHONE_POWERED_DEV, + MAX8997_MUIC_ADC_TTY_CONVERTER, + MAX8997_MUIC_ADC_UART_CABLE, + MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG, + MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF, /* JIG-USB-OFF */ + MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON, /* JIG-USB-ON */ + MAX8997_MUIC_ADC_AV_CABLE_NOLOAD, /* DESKDOCK */ + MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG, + MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF, /* JIG-UART */ + MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON, /* CARDOCK */ + MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE, + MAX8997_MUIC_ADC_OPEN, /* OPEN */ +}; + +enum max8997_muic_cable_group { + MAX8997_CABLE_GROUP_ADC = 0, + MAX8997_CABLE_GROUP_ADC_GND, + MAX8997_CABLE_GROUP_CHG, + MAX8997_CABLE_GROUP_VBVOLT, +}; + +enum max8997_muic_usb_type { + MAX8997_USB_HOST, + MAX8997_USB_DEVICE, +}; + +enum max8997_muic_charger_type { + MAX8997_CHARGER_TYPE_NONE = 0, + MAX8997_CHARGER_TYPE_USB, + MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT, + MAX8997_CHARGER_TYPE_DEDICATED_CHG, + MAX8997_CHARGER_TYPE_500MA, + MAX8997_CHARGER_TYPE_1A, + MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7, +}; + +struct max8997_muic_info { + struct device *dev; + struct i2c_client *muic; + struct extcon_dev *edev; + int prev_cable_type; + int prev_chg_type; + u8 status[2]; + + int irq; + struct work_struct irq_work; + struct mutex mutex; + + struct max8997_muic_platform_data *muic_pdata; + enum max8997_muic_charger_type pre_charger_type; + + /* + * Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + struct delayed_work wq_detcable; + + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + int path_usb; + int path_uart; +}; + +static const unsigned int max8997_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_FAST, + EXTCON_CHG_USB_SLOW, + EXTCON_CHG_USB_CDP, + EXTCON_DISP_MHL, + EXTCON_DOCK, + EXTCON_JIG, + EXTCON_NONE, +}; + +/* + * max8997_muic_set_debounce_time - Set the debounce time of ADC + * @info: the instance including private data of max8997 MUIC + * @time: the debounce time of ADC + */ +static int max8997_muic_set_debounce_time(struct max8997_muic_info *info, + enum max8997_muic_adc_debounce_time time) +{ + int ret; + + switch (time) { + case ADC_DEBOUNCE_TIME_0_5MS: + case ADC_DEBOUNCE_TIME_10MS: + case ADC_DEBOUNCE_TIME_25MS: + case ADC_DEBOUNCE_TIME_38_62MS: + ret = max8997_update_reg(info->muic, + MAX8997_MUIC_REG_CONTROL3, + time << CONTROL3_ADCDBSET_SHIFT, + CONTROL3_ADCDBSET_MASK); + if (ret) { + dev_err(info->dev, "failed to set ADC debounce time\n"); + return ret; + } + break; + default: + dev_err(info->dev, "invalid ADC debounce time\n"); + return -EINVAL; + } + + return 0; +}; + +/* + * max8997_muic_set_path - Set hardware line according to attached cable + * @info: the instance including private data of max8997 MUIC + * @value: the path according to attached cable + * @attached: the state of cable (true:attached, false:detached) + * + * The max8997 MUIC device share outside H/W line among a varity of cables, + * so this function set internal path of H/W line according to the type of + * attached cable. + */ +static int max8997_muic_set_path(struct max8997_muic_info *info, + u8 val, bool attached) +{ + int ret; + u8 ctrl1, ctrl2 = 0; + + if (attached) + ctrl1 = val; + else + ctrl1 = CONTROL1_SW_OPEN; + + ret = max8997_update_reg(info->muic, + MAX8997_MUIC_REG_CONTROL1, ctrl1, COMP_SW_MASK); + if (ret < 0) { + dev_err(info->dev, "failed to update MUIC register\n"); + return ret; + } + + if (attached) + ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */ + else + ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ + + ret = max8997_update_reg(info->muic, + MAX8997_MUIC_REG_CONTROL2, ctrl2, + CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK); + if (ret < 0) { + dev_err(info->dev, "failed to update MUIC register\n"); + return ret; + } + + dev_info(info->dev, + "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", + ctrl1, ctrl2, attached ? "attached" : "detached"); + + return 0; +} + +/* + * max8997_muic_get_cable_type - Return cable type and check cable state + * @info: the instance including private data of max8997 MUIC + * @group: the path according to attached cable + * @attached: store cable state and return + * + * This function check the cable state either attached or detached, + * and then divide precise type of cable according to cable group. + * - MAX8997_CABLE_GROUP_ADC + * - MAX8997_CABLE_GROUP_CHG + */ +static int max8997_muic_get_cable_type(struct max8997_muic_info *info, + enum max8997_muic_cable_group group, bool *attached) +{ + int cable_type = 0; + int adc; + int chg_type; + + switch (group) { + case MAX8997_CABLE_GROUP_ADC: + /* + * Read ADC value to check cable type and decide cable state + * according to cable type + */ + adc = info->status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + /* + * Check current cable state/cable type and store cable type + * (info->prev_cable_type) for handling cable when cable is + * detached. + */ + if (adc == MAX8997_MUIC_ADC_OPEN) { + *attached = false; + + cable_type = info->prev_cable_type; + info->prev_cable_type = MAX8997_MUIC_ADC_OPEN; + } else { + *attached = true; + + cable_type = info->prev_cable_type = adc; + } + break; + case MAX8997_CABLE_GROUP_CHG: + /* + * Read charger type to check cable type and decide cable state + * according to type of charger cable. + */ + chg_type = info->status[1] & STATUS2_CHGTYP_MASK; + chg_type >>= STATUS2_CHGTYP_SHIFT; + + if (chg_type == MAX8997_CHARGER_TYPE_NONE) { + *attached = false; + + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX8997_CHARGER_TYPE_NONE; + } else { + *attached = true; + + /* + * Check current cable state/cable type and store cable + * type(info->prev_chg_type) for handling cable when + * charger cable is detached. + */ + cable_type = info->prev_chg_type = chg_type; + } + + break; + default: + dev_err(info->dev, "Unknown cable group (%d)\n", group); + cable_type = -EINVAL; + break; + } + + return cable_type; +} + +static int max8997_muic_handle_usb(struct max8997_muic_info *info, + enum max8997_muic_usb_type usb_type, bool attached) +{ + int ret = 0; + + ret = max8997_muic_set_path(info, info->path_usb, attached); + if (ret < 0) { + dev_err(info->dev, "failed to update muic register\n"); + return ret; + } + + switch (usb_type) { + case MAX8997_USB_HOST: + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); + break; + case MAX8997_USB_DEVICE: + extcon_set_state_sync(info->edev, EXTCON_USB, attached); + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, + attached); + break; + default: + dev_err(info->dev, "failed to detect %s usb cable\n", + attached ? "attached" : "detached"); + return -EINVAL; + } + + return 0; +} + +static int max8997_muic_handle_dock(struct max8997_muic_info *info, + int cable_type, bool attached) +{ + int ret = 0; + + ret = max8997_muic_set_path(info, CONTROL1_SW_AUDIO, attached); + if (ret) { + dev_err(info->dev, "failed to update muic register\n"); + return ret; + } + + switch (cable_type) { + case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD: + case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON: + extcon_set_state_sync(info->edev, EXTCON_DOCK, attached); + break; + default: + dev_err(info->dev, "failed to detect %s dock device\n", + attached ? "attached" : "detached"); + return -EINVAL; + } + + return 0; +} + +static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info, + bool attached) +{ + int ret = 0; + + /* switch to UART */ + ret = max8997_muic_set_path(info, info->path_uart, attached); + if (ret) { + dev_err(info->dev, "failed to update muic register\n"); + return ret; + } + + extcon_set_state_sync(info->edev, EXTCON_JIG, attached); + + return 0; +} + +static int max8997_muic_adc_handler(struct max8997_muic_info *info) +{ + int cable_type; + bool attached; + int ret = 0; + + /* Check cable state which is either detached or attached */ + cable_type = max8997_muic_get_cable_type(info, + MAX8997_CABLE_GROUP_ADC, &attached); + + switch (cable_type) { + case MAX8997_MUIC_ADC_GROUND: + ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, attached); + if (ret < 0) + return ret; + break; + case MAX8997_MUIC_ADC_MHL: + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); + break; + case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF: + case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON: + ret = max8997_muic_handle_usb(info, + MAX8997_USB_DEVICE, attached); + if (ret < 0) + return ret; + break; + case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD: + case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON: + ret = max8997_muic_handle_dock(info, cable_type, attached); + if (ret < 0) + return ret; + break; + case MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF: + ret = max8997_muic_handle_jig_uart(info, attached); + break; + case MAX8997_MUIC_ADC_REMOTE_S1_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S2_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S3_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S4_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S5_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S6_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S7_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S8_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S9_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S10_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S11_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S12_BUTTON: + case MAX8997_MUIC_ADC_RESERVED_ACC_1: + case MAX8997_MUIC_ADC_RESERVED_ACC_2: + case MAX8997_MUIC_ADC_RESERVED_ACC_3: + case MAX8997_MUIC_ADC_RESERVED_ACC_4: + case MAX8997_MUIC_ADC_RESERVED_ACC_5: + case MAX8997_MUIC_ADC_CEA936_AUDIO: + case MAX8997_MUIC_ADC_PHONE_POWERED_DEV: + case MAX8997_MUIC_ADC_TTY_CONVERTER: + case MAX8997_MUIC_ADC_UART_CABLE: + case MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG: + case MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG: + case MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE: + /* + * This cable isn't used in general case if it is specially + * needed to detect additional cable, should implement + * proper operation when this cable is attached/detached. + */ + dev_info(info->dev, + "cable is %s but it isn't used (type:0x%x)\n", + attached ? "attached" : "detached", cable_type); + return -EAGAIN; + default: + dev_err(info->dev, + "failed to detect %s unknown cable (type:0x%x)\n", + attached ? "attached" : "detached", cable_type); + return -EINVAL; + } + + return 0; +} + +static int max8997_muic_chg_handler(struct max8997_muic_info *info) +{ + int chg_type; + bool attached; + int adc; + + chg_type = max8997_muic_get_cable_type(info, + MAX8997_CABLE_GROUP_CHG, &attached); + + switch (chg_type) { + case MAX8997_CHARGER_TYPE_NONE: + break; + case MAX8997_CHARGER_TYPE_USB: + adc = info->status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + if ((adc & STATUS1_ADC_MASK) == MAX8997_MUIC_ADC_OPEN) { + max8997_muic_handle_usb(info, + MAX8997_USB_DEVICE, attached); + } + break; + case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT: + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, + attached); + break; + case MAX8997_CHARGER_TYPE_DEDICATED_CHG: + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, + attached); + break; + case MAX8997_CHARGER_TYPE_500MA: + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, + attached); + break; + case MAX8997_CHARGER_TYPE_1A: + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, + attached); + break; + default: + dev_err(info->dev, + "failed to detect %s unknown chg cable (type:0x%x)\n", + attached ? "attached" : "detached", chg_type); + return -EINVAL; + } + + return 0; +} + +static void max8997_muic_irq_work(struct work_struct *work) +{ + struct max8997_muic_info *info = container_of(work, + struct max8997_muic_info, irq_work); + int irq_type = 0; + int i, ret; + + if (!info->edev) + return; + + mutex_lock(&info->mutex); + + for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) + if (info->irq == muic_irqs[i].virq) + irq_type = muic_irqs[i].irq; + + ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1, + 2, info->status); + if (ret) { + dev_err(info->dev, "failed to read muic register\n"); + mutex_unlock(&info->mutex); + return; + } + + switch (irq_type) { + case MAX8997_MUICIRQ_ADCError: + case MAX8997_MUICIRQ_ADCLow: + case MAX8997_MUICIRQ_ADC: + /* Handle all of cable except for charger cable */ + ret = max8997_muic_adc_handler(info); + break; + case MAX8997_MUICIRQ_VBVolt: + case MAX8997_MUICIRQ_DBChg: + case MAX8997_MUICIRQ_DCDTmr: + case MAX8997_MUICIRQ_ChgDetRun: + case MAX8997_MUICIRQ_ChgTyp: + case MAX8997_PMICIRQ_CHGINS: + case MAX8997_PMICIRQ_CHGRM: + /* Handle charger cable */ + ret = max8997_muic_chg_handler(info); + break; + case MAX8997_MUICIRQ_OVP: + break; + default: + dev_info(info->dev, "misc interrupt: irq %d occurred\n", + irq_type); + mutex_unlock(&info->mutex); + return; + } + + if (ret < 0) + dev_err(info->dev, "failed to handle MUIC interrupt\n"); + + mutex_unlock(&info->mutex); +} + +static irqreturn_t max8997_muic_irq_handler(int irq, void *data) +{ + struct max8997_muic_info *info = data; + + dev_dbg(info->dev, "irq:%d\n", irq); + info->irq = irq; + + schedule_work(&info->irq_work); + + return IRQ_HANDLED; +} + +static int max8997_muic_detect_dev(struct max8997_muic_info *info) +{ + int ret = 0; + int adc; + int chg_type; + bool attached; + + mutex_lock(&info->mutex); + + /* Read STATUSx register to detect accessory */ + ret = max8997_bulk_read(info->muic, + MAX8997_MUIC_REG_STATUS1, 2, info->status); + if (ret) { + dev_err(info->dev, "failed to read MUIC register\n"); + mutex_unlock(&info->mutex); + return ret; + } + + adc = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_ADC, + &attached); + if (attached && adc != MAX8997_MUIC_ADC_OPEN) { + ret = max8997_muic_adc_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect ADC cable\n"); + mutex_unlock(&info->mutex); + return ret; + } + } + + chg_type = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_CHG, + &attached); + if (attached && chg_type != MAX8997_CHARGER_TYPE_NONE) { + ret = max8997_muic_chg_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect charger cable\n"); + mutex_unlock(&info->mutex); + return ret; + } + } + + mutex_unlock(&info->mutex); + + return 0; +} + +static void max8997_muic_detect_cable_wq(struct work_struct *work) +{ + struct max8997_muic_info *info = container_of(to_delayed_work(work), + struct max8997_muic_info, wq_detcable); + int ret; + + ret = max8997_muic_detect_dev(info); + if (ret < 0) + dev_err(info->dev, "failed to detect cable type\n"); +} + +static int max8997_muic_probe(struct platform_device *pdev) +{ + struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent); + struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev); + struct max8997_muic_info *info; + int delay_jiffies; + int cable_type; + bool attached; + int ret, i; + + info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_muic_info), + GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = &pdev->dev; + info->muic = max8997->muic; + + platform_set_drvdata(pdev, info); + mutex_init(&info->mutex); + + INIT_WORK(&info->irq_work, max8997_muic_irq_work); + ret = devm_work_autocancel(&pdev->dev, &info->irq_work, + max8997_muic_irq_work); + if (ret) + return ret; + + for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) { + struct max8997_muic_irq *muic_irq = &muic_irqs[i]; + unsigned int virq = 0; + + virq = irq_create_mapping(max8997->irq_domain, muic_irq->irq); + if (!virq) + return -EINVAL; + + muic_irq->virq = virq; + + ret = devm_request_threaded_irq(&pdev->dev, virq, NULL, + max8997_muic_irq_handler, + IRQF_NO_SUSPEND, + muic_irq->name, info); + if (ret) { + dev_err(&pdev->dev, + "failed: irq request (IRQ: %d, error :%d)\n", + muic_irq->irq, ret); + return ret; + } + } + + /* External connector */ + info->edev = devm_extcon_dev_allocate(&pdev->dev, max8997_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); + return PTR_ERR(info->edev); + } + + ret = devm_extcon_dev_register(&pdev->dev, info->edev); + if (ret) { + dev_err(&pdev->dev, "failed to register extcon device\n"); + return ret; + } + + if (pdata && pdata->muic_pdata) { + struct max8997_muic_platform_data *muic_pdata + = pdata->muic_pdata; + + /* Initialize registers according to platform data */ + for (i = 0; i < muic_pdata->num_init_data; i++) { + max8997_write_reg(info->muic, + muic_pdata->init_data[i].addr, + muic_pdata->init_data[i].data); + } + + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + if (muic_pdata->path_uart) + info->path_uart = muic_pdata->path_uart; + else + info->path_uart = CONTROL1_SW_UART; + + if (muic_pdata->path_usb) + info->path_usb = muic_pdata->path_usb; + else + info->path_usb = CONTROL1_SW_USB; + + /* + * Default delay time for detecting cable state + * after certain time. + */ + if (muic_pdata->detcable_delay_ms) + delay_jiffies = + msecs_to_jiffies(muic_pdata->detcable_delay_ms); + else + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + } else { + info->path_uart = CONTROL1_SW_UART; + info->path_usb = CONTROL1_SW_USB; + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + } + + /* Set initial path for UART when JIG is connected to get serial logs */ + ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1, + 2, info->status); + if (ret) { + dev_err(info->dev, "failed to read MUIC register\n"); + return ret; + } + cable_type = max8997_muic_get_cable_type(info, + MAX8997_CABLE_GROUP_ADC, &attached); + if (attached && cable_type == MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF) + max8997_muic_set_path(info, info->path_uart, true); + + /* Set ADC debounce time */ + max8997_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); + + /* + * Detect accessory after completing the initialization of platform + * + * - Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq); + queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, + delay_jiffies); + + return 0; +} + +static struct platform_driver max8997_muic_driver = { + .driver = { + .name = DEV_NAME, + }, + .probe = max8997_muic_probe, +}; + +module_platform_driver(max8997_muic_driver); + +MODULE_DESCRIPTION("Maxim MAX8997 Extcon driver"); +MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:max8997-muic"); |