summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-realtek-otto.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio/gpio-realtek-otto.c')
-rw-r--r--drivers/gpio/gpio-realtek-otto.c459
1 files changed, 459 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-realtek-otto.c b/drivers/gpio/gpio-realtek-otto.c
new file mode 100644
index 000000000..d6418f89d
--- /dev/null
+++ b/drivers/gpio/gpio-realtek-otto.c
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/gpio/driver.h>
+#include <linux/cpumask.h>
+#include <linux/irq.h>
+#include <linux/minmax.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+/*
+ * Total register block size is 0x1C for one bank of four ports (A, B, C, D).
+ * An optional second bank, with ports E, F, G, and H, may be present, starting
+ * at register offset 0x1C.
+ */
+
+/*
+ * Pin select: (0) "normal", (1) "dedicate peripheral"
+ * Not used on RTL8380/RTL8390, peripheral selection is managed by control bits
+ * in the peripheral registers.
+ */
+#define REALTEK_GPIO_REG_CNR 0x00
+/* Clear bit (0) for input, set bit (1) for output */
+#define REALTEK_GPIO_REG_DIR 0x08
+#define REALTEK_GPIO_REG_DATA 0x0C
+/* Read bit for IRQ status, write 1 to clear IRQ */
+#define REALTEK_GPIO_REG_ISR 0x10
+/* Two bits per GPIO in IMR registers */
+#define REALTEK_GPIO_REG_IMR 0x14
+#define REALTEK_GPIO_REG_IMR_AB 0x14
+#define REALTEK_GPIO_REG_IMR_CD 0x18
+#define REALTEK_GPIO_IMR_LINE_MASK GENMASK(1, 0)
+#define REALTEK_GPIO_IRQ_EDGE_FALLING 1
+#define REALTEK_GPIO_IRQ_EDGE_RISING 2
+#define REALTEK_GPIO_IRQ_EDGE_BOTH 3
+
+#define REALTEK_GPIO_MAX 32
+#define REALTEK_GPIO_PORTS_PER_BANK 4
+
+/**
+ * realtek_gpio_ctrl - Realtek Otto GPIO driver data
+ *
+ * @gc: Associated gpio_chip instance
+ * @base: Base address of the register block for a GPIO bank
+ * @lock: Lock for accessing the IRQ registers and values
+ * @intr_mask: Mask for interrupts lines
+ * @intr_type: Interrupt type selection
+ * @bank_read: Read a bank setting as a single 32-bit value
+ * @bank_write: Write a bank setting as a single 32-bit value
+ * @imr_line_pos: Bit shift of an IRQ line's IMR value.
+ *
+ * The DIR, DATA, and ISR registers consist of four 8-bit port values, packed
+ * into a single 32-bit register. Use @bank_read (@bank_write) to get (assign)
+ * a value from (to) these registers. The IMR register consists of four 16-bit
+ * port values, packed into two 32-bit registers. Use @imr_line_pos to get the
+ * bit shift of the 2-bit field for a line's IMR settings. Shifts larger than
+ * 32 overflow into the second register.
+ *
+ * Because the interrupt mask register (IMR) combines the function of IRQ type
+ * selection and masking, two extra values are stored. @intr_mask is used to
+ * mask/unmask the interrupts for a GPIO line, and @intr_type is used to store
+ * the selected interrupt types. The logical AND of these values is written to
+ * IMR on changes.
+ */
+struct realtek_gpio_ctrl {
+ struct gpio_chip gc;
+ void __iomem *base;
+ void __iomem *cpumask_base;
+ struct cpumask cpu_irq_maskable;
+ raw_spinlock_t lock;
+ u8 intr_mask[REALTEK_GPIO_MAX];
+ u8 intr_type[REALTEK_GPIO_MAX];
+ u32 (*bank_read)(void __iomem *reg);
+ void (*bank_write)(void __iomem *reg, u32 value);
+ unsigned int (*line_imr_pos)(unsigned int line);
+};
+
+/* Expand with more flags as devices with other quirks are added */
+enum realtek_gpio_flags {
+ /*
+ * Allow disabling interrupts, for cases where the port order is
+ * unknown. This may result in a port mismatch between ISR and IMR.
+ * An interrupt would appear to come from a different line than the
+ * line the IRQ handler was assigned to, causing uncaught interrupts.
+ */
+ GPIO_INTERRUPTS_DISABLED = BIT(0),
+ /*
+ * Port order is reversed, meaning DCBA register layout for 1-bit
+ * fields, and [BA, DC] for 2-bit fields.
+ */
+ GPIO_PORTS_REVERSED = BIT(1),
+ /*
+ * Interrupts can be enabled per cpu. This requires a secondary IO
+ * range, where the per-cpu enable masks are located.
+ */
+ GPIO_INTERRUPTS_PER_CPU = BIT(2),
+};
+
+static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+
+ return container_of(gc, struct realtek_gpio_ctrl, gc);
+}
+
+/*
+ * Normal port order register access
+ *
+ * Port information is stored with the first port at offset 0, followed by the
+ * second, etc. Most registers store one bit per GPIO and use a u8 value per
+ * port. The two interrupt mask registers store two bits per GPIO, so use u16
+ * values.
+ */
+static u32 realtek_gpio_bank_read_swapped(void __iomem *reg)
+{
+ return ioread32be(reg);
+}
+
+static void realtek_gpio_bank_write_swapped(void __iomem *reg, u32 value)
+{
+ iowrite32be(value, reg);
+}
+
+static unsigned int realtek_gpio_line_imr_pos_swapped(unsigned int line)
+{
+ unsigned int port_pin = line % 8;
+ unsigned int port = line / 8;
+
+ return 2 * (8 * (port ^ 1) + port_pin);
+}
+
+/*
+ * Reversed port order register access
+ *
+ * For registers with one bit per GPIO, all ports are stored as u8-s in one
+ * register in reversed order. The two interrupt mask registers store two bits
+ * per GPIO, so use u16 values. The first register contains ports 1 and 0, the
+ * second ports 3 and 2.
+ */
+static u32 realtek_gpio_bank_read(void __iomem *reg)
+{
+ return ioread32(reg);
+}
+
+static void realtek_gpio_bank_write(void __iomem *reg, u32 value)
+{
+ iowrite32(value, reg);
+}
+
+static unsigned int realtek_gpio_line_imr_pos(unsigned int line)
+{
+ return 2 * line;
+}
+
+static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, u32 mask)
+{
+ ctrl->bank_write(ctrl->base + REALTEK_GPIO_REG_ISR, mask);
+}
+
+static u32 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl)
+{
+ return ctrl->bank_read(ctrl->base + REALTEK_GPIO_REG_ISR);
+}
+
+/* Set the rising and falling edge mask bits for a GPIO pin */
+static void realtek_gpio_update_line_imr(struct realtek_gpio_ctrl *ctrl, unsigned int line)
+{
+ void __iomem *reg = ctrl->base + REALTEK_GPIO_REG_IMR;
+ unsigned int line_shift = ctrl->line_imr_pos(line);
+ unsigned int shift = line_shift % 32;
+ u32 irq_type = ctrl->intr_type[line];
+ u32 irq_mask = ctrl->intr_mask[line];
+ u32 reg_val;
+
+ reg += 4 * (line_shift / 32);
+ reg_val = ioread32(reg);
+ reg_val &= ~(REALTEK_GPIO_IMR_LINE_MASK << shift);
+ reg_val |= (irq_type & irq_mask & REALTEK_GPIO_IMR_LINE_MASK) << shift;
+ iowrite32(reg_val, reg);
+}
+
+static void realtek_gpio_irq_ack(struct irq_data *data)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ irq_hw_number_t line = irqd_to_hwirq(data);
+
+ realtek_gpio_clear_isr(ctrl, BIT(line));
+}
+
+static void realtek_gpio_irq_unmask(struct irq_data *data)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+ unsigned long flags;
+
+ gpiochip_enable_irq(&ctrl->gc, line);
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+ ctrl->intr_mask[line] = REALTEK_GPIO_IMR_LINE_MASK;
+ realtek_gpio_update_line_imr(ctrl, line);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+}
+
+static void realtek_gpio_irq_mask(struct irq_data *data)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+ ctrl->intr_mask[line] = 0;
+ realtek_gpio_update_line_imr(ctrl, line);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+
+ gpiochip_disable_irq(&ctrl->gc, line);
+}
+
+static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+ unsigned long flags;
+ u8 type;
+
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_FALLING:
+ type = REALTEK_GPIO_IRQ_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ type = REALTEK_GPIO_IRQ_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ type = REALTEK_GPIO_IRQ_EDGE_BOTH;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ irq_set_handler_locked(data, handle_edge_irq);
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+ ctrl->intr_type[line] = type;
+ realtek_gpio_update_line_imr(ctrl, line);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+
+ return 0;
+}
+
+static void realtek_gpio_irq_handler(struct irq_desc *desc)
+{
+ struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+ struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+ unsigned long status;
+ int offset;
+
+ chained_irq_enter(irq_chip, desc);
+
+ status = realtek_gpio_read_isr(ctrl);
+ for_each_set_bit(offset, &status, gc->ngpio)
+ generic_handle_domain_irq(gc->irq.domain, offset);
+
+ chained_irq_exit(irq_chip, desc);
+}
+
+static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, int cpu)
+{
+ return ctrl->cpumask_base + REALTEK_GPIO_PORTS_PER_BANK * cpu;
+}
+
+static int realtek_gpio_irq_set_affinity(struct irq_data *data,
+ const struct cpumask *dest, bool force)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+ void __iomem *irq_cpu_mask;
+ unsigned long flags;
+ int cpu;
+ u32 v;
+
+ if (!ctrl->cpumask_base)
+ return -ENXIO;
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+
+ for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
+ irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu);
+ v = ctrl->bank_read(irq_cpu_mask);
+
+ if (cpumask_test_cpu(cpu, dest))
+ v |= BIT(line);
+ else
+ v &= ~BIT(line);
+
+ ctrl->bank_write(irq_cpu_mask, v);
+ }
+
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+
+ irq_data_update_effective_affinity(data, dest);
+
+ return 0;
+}
+
+static int realtek_gpio_irq_init(struct gpio_chip *gc)
+{
+ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+ u32 mask_all = GENMASK(gc->ngpio - 1, 0);
+ unsigned int line;
+ int cpu;
+
+ for (line = 0; line < gc->ngpio; line++)
+ realtek_gpio_update_line_imr(ctrl, line);
+
+ realtek_gpio_clear_isr(ctrl, mask_all);
+
+ for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
+ ctrl->bank_write(realtek_gpio_irq_cpu_mask(ctrl, cpu), mask_all);
+
+ return 0;
+}
+
+static const struct irq_chip realtek_gpio_irq_chip = {
+ .name = "realtek-otto-gpio",
+ .irq_ack = realtek_gpio_irq_ack,
+ .irq_mask = realtek_gpio_irq_mask,
+ .irq_unmask = realtek_gpio_irq_unmask,
+ .irq_set_type = realtek_gpio_irq_set_type,
+ .irq_set_affinity = realtek_gpio_irq_set_affinity,
+ .flags = IRQCHIP_IMMUTABLE,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
+static const struct of_device_id realtek_gpio_of_match[] = {
+ {
+ .compatible = "realtek,otto-gpio",
+ .data = (void *)GPIO_INTERRUPTS_DISABLED,
+ },
+ {
+ .compatible = "realtek,rtl8380-gpio",
+ },
+ {
+ .compatible = "realtek,rtl8390-gpio",
+ },
+ {
+ .compatible = "realtek,rtl9300-gpio",
+ .data = (void *)(GPIO_PORTS_REVERSED | GPIO_INTERRUPTS_PER_CPU)
+ },
+ {
+ .compatible = "realtek,rtl9310-gpio",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, realtek_gpio_of_match);
+
+static int realtek_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ unsigned long bgpio_flags;
+ unsigned int dev_flags;
+ struct gpio_irq_chip *girq;
+ struct realtek_gpio_ctrl *ctrl;
+ struct resource *res;
+ u32 ngpios;
+ unsigned int nr_cpus;
+ int cpu, err, irq;
+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ dev_flags = (unsigned int) device_get_match_data(dev);
+
+ ngpios = REALTEK_GPIO_MAX;
+ device_property_read_u32(dev, "ngpios", &ngpios);
+
+ if (ngpios > REALTEK_GPIO_MAX) {
+ dev_err(&pdev->dev, "invalid ngpios (max. %d)\n",
+ REALTEK_GPIO_MAX);
+ return -EINVAL;
+ }
+
+ ctrl->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ctrl->base))
+ return PTR_ERR(ctrl->base);
+
+ raw_spin_lock_init(&ctrl->lock);
+
+ if (dev_flags & GPIO_PORTS_REVERSED) {
+ bgpio_flags = 0;
+ ctrl->bank_read = realtek_gpio_bank_read;
+ ctrl->bank_write = realtek_gpio_bank_write;
+ ctrl->line_imr_pos = realtek_gpio_line_imr_pos;
+ } else {
+ bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
+ ctrl->bank_read = realtek_gpio_bank_read_swapped;
+ ctrl->bank_write = realtek_gpio_bank_write_swapped;
+ ctrl->line_imr_pos = realtek_gpio_line_imr_pos_swapped;
+ }
+
+ err = bgpio_init(&ctrl->gc, dev, 4,
+ ctrl->base + REALTEK_GPIO_REG_DATA, NULL, NULL,
+ ctrl->base + REALTEK_GPIO_REG_DIR, NULL,
+ bgpio_flags);
+ if (err) {
+ dev_err(dev, "unable to init generic GPIO");
+ return err;
+ }
+
+ ctrl->gc.ngpio = ngpios;
+ ctrl->gc.owner = THIS_MODULE;
+
+ irq = platform_get_irq_optional(pdev, 0);
+ if (!(dev_flags & GPIO_INTERRUPTS_DISABLED) && irq > 0) {
+ girq = &ctrl->gc.irq;
+ gpio_irq_chip_set_chip(girq, &realtek_gpio_irq_chip);
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_bad_irq;
+ girq->parent_handler = realtek_gpio_irq_handler;
+ girq->num_parents = 1;
+ girq->parents = devm_kcalloc(dev, girq->num_parents,
+ sizeof(*girq->parents), GFP_KERNEL);
+ if (!girq->parents)
+ return -ENOMEM;
+ girq->parents[0] = irq;
+ girq->init_hw = realtek_gpio_irq_init;
+ }
+
+ cpumask_clear(&ctrl->cpu_irq_maskable);
+
+ if ((dev_flags & GPIO_INTERRUPTS_PER_CPU) && irq > 0) {
+ ctrl->cpumask_base = devm_platform_get_and_ioremap_resource(pdev, 1, &res);
+ if (IS_ERR(ctrl->cpumask_base))
+ return dev_err_probe(dev, PTR_ERR(ctrl->cpumask_base),
+ "missing CPU IRQ mask registers");
+
+ nr_cpus = resource_size(res) / REALTEK_GPIO_PORTS_PER_BANK;
+ nr_cpus = min(nr_cpus, num_present_cpus());
+
+ for (cpu = 0; cpu < nr_cpus; cpu++)
+ cpumask_set_cpu(cpu, &ctrl->cpu_irq_maskable);
+ }
+
+ return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
+}
+
+static struct platform_driver realtek_gpio_driver = {
+ .driver = {
+ .name = "realtek-otto-gpio",
+ .of_match_table = realtek_gpio_of_match,
+ },
+ .probe = realtek_gpio_probe,
+};
+module_platform_driver(realtek_gpio_driver);
+
+MODULE_DESCRIPTION("Realtek Otto GPIO support");
+MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
+MODULE_LICENSE("GPL v2");