diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-raydium-rm67191.c')
-rw-r--r-- | drivers/gpu/drm/panel/panel-raydium-rm67191.c | 659 |
1 files changed, 659 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-raydium-rm67191.c b/drivers/gpu/drm/panel/panel-raydium-rm67191.c new file mode 100644 index 000000000..dbb1ed4ef --- /dev/null +++ b/drivers/gpu/drm/panel/panel-raydium-rm67191.c @@ -0,0 +1,659 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Raydium RM67191 MIPI-DSI panel driver + * + * Copyright 2019 NXP + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <video/mipi_display.h> +#include <video/of_videomode.h> +#include <video/videomode.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +/* Panel specific color-format bits */ +#define COL_FMT_16BPP 0x55 +#define COL_FMT_18BPP 0x66 +#define COL_FMT_24BPP 0x77 + +/* Write Manufacture Command Set Control */ +#define WRMAUCCTR 0xFE + +/* Manufacturer Command Set pages (CMD2) */ +struct cmd_set_entry { + u8 cmd; + u8 param; +}; + +/* + * There is no description in the Reference Manual about these commands. + * We received them from vendor, so just use them as is. + */ +static const struct cmd_set_entry manufacturer_cmd_set[] = { + {0xFE, 0x0B}, + {0x28, 0x40}, + {0x29, 0x4F}, + {0xFE, 0x0E}, + {0x4B, 0x00}, + {0x4C, 0x0F}, + {0x4D, 0x20}, + {0x4E, 0x40}, + {0x4F, 0x60}, + {0x50, 0xA0}, + {0x51, 0xC0}, + {0x52, 0xE0}, + {0x53, 0xFF}, + {0xFE, 0x0D}, + {0x18, 0x08}, + {0x42, 0x00}, + {0x08, 0x41}, + {0x46, 0x02}, + {0x72, 0x09}, + {0xFE, 0x0A}, + {0x24, 0x17}, + {0x04, 0x07}, + {0x1A, 0x0C}, + {0x0F, 0x44}, + {0xFE, 0x04}, + {0x00, 0x0C}, + {0x05, 0x08}, + {0x06, 0x08}, + {0x08, 0x08}, + {0x09, 0x08}, + {0x0A, 0xE6}, + {0x0B, 0x8C}, + {0x1A, 0x12}, + {0x1E, 0xE0}, + {0x29, 0x93}, + {0x2A, 0x93}, + {0x2F, 0x02}, + {0x31, 0x02}, + {0x33, 0x05}, + {0x37, 0x2D}, + {0x38, 0x2D}, + {0x3A, 0x1E}, + {0x3B, 0x1E}, + {0x3D, 0x27}, + {0x3F, 0x80}, + {0x40, 0x40}, + {0x41, 0xE0}, + {0x4F, 0x2F}, + {0x50, 0x1E}, + {0xFE, 0x06}, + {0x00, 0xCC}, + {0x05, 0x05}, + {0x07, 0xA2}, + {0x08, 0xCC}, + {0x0D, 0x03}, + {0x0F, 0xA2}, + {0x32, 0xCC}, + {0x37, 0x05}, + {0x39, 0x83}, + {0x3A, 0xCC}, + {0x41, 0x04}, + {0x43, 0x83}, + {0x44, 0xCC}, + {0x49, 0x05}, + {0x4B, 0xA2}, + {0x4C, 0xCC}, + {0x51, 0x03}, + {0x53, 0xA2}, + {0x75, 0xCC}, + {0x7A, 0x03}, + {0x7C, 0x83}, + {0x7D, 0xCC}, + {0x82, 0x02}, + {0x84, 0x83}, + {0x85, 0xEC}, + {0x86, 0x0F}, + {0x87, 0xFF}, + {0x88, 0x00}, + {0x8A, 0x02}, + {0x8C, 0xA2}, + {0x8D, 0xEA}, + {0x8E, 0x01}, + {0x8F, 0xE8}, + {0xFE, 0x06}, + {0x90, 0x0A}, + {0x92, 0x06}, + {0x93, 0xA0}, + {0x94, 0xA8}, + {0x95, 0xEC}, + {0x96, 0x0F}, + {0x97, 0xFF}, + {0x98, 0x00}, + {0x9A, 0x02}, + {0x9C, 0xA2}, + {0xAC, 0x04}, + {0xFE, 0x06}, + {0xB1, 0x12}, + {0xB2, 0x17}, + {0xB3, 0x17}, + {0xB4, 0x17}, + {0xB5, 0x17}, + {0xB6, 0x11}, + {0xB7, 0x08}, + {0xB8, 0x09}, + {0xB9, 0x06}, + {0xBA, 0x07}, + {0xBB, 0x17}, + {0xBC, 0x17}, + {0xBD, 0x17}, + {0xBE, 0x17}, + {0xBF, 0x17}, + {0xC0, 0x17}, + {0xC1, 0x17}, + {0xC2, 0x17}, + {0xC3, 0x17}, + {0xC4, 0x0F}, + {0xC5, 0x0E}, + {0xC6, 0x00}, + {0xC7, 0x01}, + {0xC8, 0x10}, + {0xFE, 0x06}, + {0x95, 0xEC}, + {0x8D, 0xEE}, + {0x44, 0xEC}, + {0x4C, 0xEC}, + {0x32, 0xEC}, + {0x3A, 0xEC}, + {0x7D, 0xEC}, + {0x75, 0xEC}, + {0x00, 0xEC}, + {0x08, 0xEC}, + {0x85, 0xEC}, + {0xA6, 0x21}, + {0xA7, 0x05}, + {0xA9, 0x06}, + {0x82, 0x06}, + {0x41, 0x06}, + {0x7A, 0x07}, + {0x37, 0x07}, + {0x05, 0x06}, + {0x49, 0x06}, + {0x0D, 0x04}, + {0x51, 0x04}, +}; + +static const u32 rad_bus_formats[] = { + MEDIA_BUS_FMT_RGB888_1X24, + MEDIA_BUS_FMT_RGB666_1X18, + MEDIA_BUS_FMT_RGB565_1X16, +}; + +static const u32 rad_bus_flags = DRM_BUS_FLAG_DE_LOW | + DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE; + +struct rad_panel { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + + struct gpio_desc *reset; + struct backlight_device *backlight; + + struct regulator_bulk_data *supplies; + unsigned int num_supplies; + + bool prepared; + bool enabled; +}; + +static const struct drm_display_mode default_mode = { + .clock = 132000, + .hdisplay = 1080, + .hsync_start = 1080 + 20, + .hsync_end = 1080 + 20 + 2, + .htotal = 1080 + 20 + 2 + 34, + .vdisplay = 1920, + .vsync_start = 1920 + 10, + .vsync_end = 1920 + 10 + 2, + .vtotal = 1920 + 10 + 2 + 4, + .width_mm = 68, + .height_mm = 121, + .flags = DRM_MODE_FLAG_NHSYNC | + DRM_MODE_FLAG_NVSYNC, +}; + +static inline struct rad_panel *to_rad_panel(struct drm_panel *panel) +{ + return container_of(panel, struct rad_panel, panel); +} + +static int rad_panel_push_cmd_list(struct mipi_dsi_device *dsi) +{ + size_t i; + size_t count = ARRAY_SIZE(manufacturer_cmd_set); + int ret = 0; + + for (i = 0; i < count; i++) { + const struct cmd_set_entry *entry = &manufacturer_cmd_set[i]; + u8 buffer[2] = { entry->cmd, entry->param }; + + ret = mipi_dsi_generic_write(dsi, &buffer, sizeof(buffer)); + if (ret < 0) + return ret; + } + + return ret; +}; + +static int color_format_from_dsi_format(enum mipi_dsi_pixel_format format) +{ + switch (format) { + case MIPI_DSI_FMT_RGB565: + return COL_FMT_16BPP; + case MIPI_DSI_FMT_RGB666: + case MIPI_DSI_FMT_RGB666_PACKED: + return COL_FMT_18BPP; + case MIPI_DSI_FMT_RGB888: + return COL_FMT_24BPP; + default: + return COL_FMT_24BPP; /* for backward compatibility */ + } +}; + +static int rad_panel_prepare(struct drm_panel *panel) +{ + struct rad_panel *rad = to_rad_panel(panel); + int ret; + + if (rad->prepared) + return 0; + + ret = regulator_bulk_enable(rad->num_supplies, rad->supplies); + if (ret) + return ret; + + if (rad->reset) { + gpiod_set_value_cansleep(rad->reset, 1); + usleep_range(3000, 5000); + gpiod_set_value_cansleep(rad->reset, 0); + usleep_range(18000, 20000); + } + + rad->prepared = true; + + return 0; +} + +static int rad_panel_unprepare(struct drm_panel *panel) +{ + struct rad_panel *rad = to_rad_panel(panel); + int ret; + + if (!rad->prepared) + return 0; + + /* + * Right after asserting the reset, we need to release it, so that the + * touch driver can have an active connection with the touch controller + * even after the display is turned off. + */ + if (rad->reset) { + gpiod_set_value_cansleep(rad->reset, 1); + usleep_range(15000, 17000); + gpiod_set_value_cansleep(rad->reset, 0); + } + + ret = regulator_bulk_disable(rad->num_supplies, rad->supplies); + if (ret) + return ret; + + rad->prepared = false; + + return 0; +} + +static int rad_panel_enable(struct drm_panel *panel) +{ + struct rad_panel *rad = to_rad_panel(panel); + struct mipi_dsi_device *dsi = rad->dsi; + struct device *dev = &dsi->dev; + int color_format = color_format_from_dsi_format(dsi->format); + int ret; + + if (rad->enabled) + return 0; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + ret = rad_panel_push_cmd_list(dsi); + if (ret < 0) { + dev_err(dev, "Failed to send MCS (%d)\n", ret); + goto fail; + } + + /* Select User Command Set table (CMD1) */ + ret = mipi_dsi_generic_write(dsi, (u8[]){ WRMAUCCTR, 0x00 }, 2); + if (ret < 0) + goto fail; + + /* Software reset */ + ret = mipi_dsi_dcs_soft_reset(dsi); + if (ret < 0) { + dev_err(dev, "Failed to do Software Reset (%d)\n", ret); + goto fail; + } + + usleep_range(15000, 17000); + + /* Set DSI mode */ + ret = mipi_dsi_generic_write(dsi, (u8[]){ 0xC2, 0x0B }, 2); + if (ret < 0) { + dev_err(dev, "Failed to set DSI mode (%d)\n", ret); + goto fail; + } + /* Set tear ON */ + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (ret < 0) { + dev_err(dev, "Failed to set tear ON (%d)\n", ret); + goto fail; + } + /* Set tear scanline */ + ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x380); + if (ret < 0) { + dev_err(dev, "Failed to set tear scanline (%d)\n", ret); + goto fail; + } + /* Set pixel format */ + ret = mipi_dsi_dcs_set_pixel_format(dsi, color_format); + dev_dbg(dev, "Interface color format set to 0x%x\n", color_format); + if (ret < 0) { + dev_err(dev, "Failed to set pixel format (%d)\n", ret); + goto fail; + } + /* Exit sleep mode */ + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to exit sleep mode (%d)\n", ret); + goto fail; + } + + usleep_range(5000, 7000); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display ON (%d)\n", ret); + goto fail; + } + + backlight_enable(rad->backlight); + + rad->enabled = true; + + return 0; + +fail: + gpiod_set_value_cansleep(rad->reset, 1); + + return ret; +} + +static int rad_panel_disable(struct drm_panel *panel) +{ + struct rad_panel *rad = to_rad_panel(panel); + struct mipi_dsi_device *dsi = rad->dsi; + struct device *dev = &dsi->dev; + int ret; + + if (!rad->enabled) + return 0; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + backlight_disable(rad->backlight); + + usleep_range(10000, 12000); + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display OFF (%d)\n", ret); + return ret; + } + + usleep_range(5000, 10000); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to enter sleep mode (%d)\n", ret); + return ret; + } + + rad->enabled = false; + + return 0; +} + +static int rad_panel_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &default_mode); + if (!mode) { + dev_err(panel->dev, "failed to add mode %ux%u@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + drm_mode_vrefresh(&default_mode)); + return -ENOMEM; + } + + drm_mode_set_name(mode); + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + connector->display_info.bus_flags = rad_bus_flags; + + drm_display_info_set_bus_formats(&connector->display_info, + rad_bus_formats, + ARRAY_SIZE(rad_bus_formats)); + return 1; +} + +static int rad_bl_get_brightness(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi); + u16 brightness; + int ret; + + if (!rad->prepared) + return 0; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness); + if (ret < 0) + return ret; + + bl->props.brightness = brightness; + + return brightness & 0xff; +} + +static int rad_bl_update_status(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi); + int ret = 0; + + if (!rad->prepared) + return 0; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness); + if (ret < 0) + return ret; + + return 0; +} + +static const struct backlight_ops rad_bl_ops = { + .update_status = rad_bl_update_status, + .get_brightness = rad_bl_get_brightness, +}; + +static const struct drm_panel_funcs rad_panel_funcs = { + .prepare = rad_panel_prepare, + .unprepare = rad_panel_unprepare, + .enable = rad_panel_enable, + .disable = rad_panel_disable, + .get_modes = rad_panel_get_modes, +}; + +static const char * const rad_supply_names[] = { + "v3p3", + "v1p8", +}; + +static int rad_init_regulators(struct rad_panel *rad) +{ + struct device *dev = &rad->dsi->dev; + int i; + + rad->num_supplies = ARRAY_SIZE(rad_supply_names); + rad->supplies = devm_kcalloc(dev, rad->num_supplies, + sizeof(*rad->supplies), GFP_KERNEL); + if (!rad->supplies) + return -ENOMEM; + + for (i = 0; i < rad->num_supplies; i++) + rad->supplies[i].supply = rad_supply_names[i]; + + return devm_regulator_bulk_get(dev, rad->num_supplies, rad->supplies); +}; + +static int rad_panel_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct device_node *np = dev->of_node; + struct rad_panel *panel; + struct backlight_properties bl_props; + int ret; + u32 video_mode; + + panel = devm_kzalloc(&dsi->dev, sizeof(*panel), GFP_KERNEL); + if (!panel) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, panel); + + panel->dsi = dsi; + + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO; + + ret = of_property_read_u32(np, "video-mode", &video_mode); + if (!ret) { + switch (video_mode) { + case 0: + /* burst mode */ + dsi->mode_flags |= MIPI_DSI_MODE_VIDEO_BURST; + break; + case 1: + /* non-burst mode with sync event */ + break; + case 2: + /* non-burst mode with sync pulse */ + dsi->mode_flags |= MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + break; + default: + dev_warn(dev, "invalid video mode %d\n", video_mode); + break; + } + } + + ret = of_property_read_u32(np, "dsi-lanes", &dsi->lanes); + if (ret) { + dev_err(dev, "Failed to get dsi-lanes property (%d)\n", ret); + return ret; + } + + panel->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(panel->reset)) + return PTR_ERR(panel->reset); + + memset(&bl_props, 0, sizeof(bl_props)); + bl_props.type = BACKLIGHT_RAW; + bl_props.brightness = 255; + bl_props.max_brightness = 255; + + panel->backlight = devm_backlight_device_register(dev, dev_name(dev), + dev, dsi, &rad_bl_ops, + &bl_props); + if (IS_ERR(panel->backlight)) { + ret = PTR_ERR(panel->backlight); + dev_err(dev, "Failed to register backlight (%d)\n", ret); + return ret; + } + + ret = rad_init_regulators(panel); + if (ret) + return ret; + + drm_panel_init(&panel->panel, dev, &rad_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + dev_set_drvdata(dev, panel); + + drm_panel_add(&panel->panel); + + ret = mipi_dsi_attach(dsi); + if (ret) + drm_panel_remove(&panel->panel); + + return ret; +} + +static void rad_panel_remove(struct mipi_dsi_device *dsi) +{ + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi); + struct device *dev = &dsi->dev; + int ret; + + ret = mipi_dsi_detach(dsi); + if (ret) + dev_err(dev, "Failed to detach from host (%d)\n", ret); + + drm_panel_remove(&rad->panel); +} + +static void rad_panel_shutdown(struct mipi_dsi_device *dsi) +{ + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi); + + rad_panel_disable(&rad->panel); + rad_panel_unprepare(&rad->panel); +} + +static const struct of_device_id rad_of_match[] = { + { .compatible = "raydium,rm67191", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rad_of_match); + +static struct mipi_dsi_driver rad_panel_driver = { + .driver = { + .name = "panel-raydium-rm67191", + .of_match_table = rad_of_match, + }, + .probe = rad_panel_probe, + .remove = rad_panel_remove, + .shutdown = rad_panel_shutdown, +}; +module_mipi_dsi_driver(rad_panel_driver); + +MODULE_AUTHOR("Robert Chiras <robert.chiras@nxp.com>"); +MODULE_DESCRIPTION("DRM Driver for Raydium RM67191 MIPI DSI panel"); +MODULE_LICENSE("GPL v2"); |