1 files changed, 360 insertions, 0 deletions
diff --git a/drivers/gpu/drm/vc4/vc4_irq.c b/drivers/gpu/drm/vc4/vc4_irq.c
new file mode 100644
index 000000000..1e6db0121
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_irq.c
@@ -0,0 +1,360 @@
+/*
+ * Copyright © 2014 Broadcom
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+/**
+ * DOC: Interrupt management for the V3D engine
+ *
+ * We have an interrupt status register (V3D_INTCTL) which reports
+ * interrupts, and where writing 1 bits clears those interrupts.
+ * There are also a pair of interrupt registers
+ * (V3D_INTENA/V3D_INTDIS) where writing a 1 to their bits enables or
+ * disables that specific interrupt, and 0s written are ignored
+ * (reading either one returns the set of enabled interrupts).
+ *
+ * When we take a binning flush done interrupt, we need to submit the
+ * next frame for binning and move the finished frame to the render
+ * thread.
+ *
+ * When we take a render frame interrupt, we need to wake the
+ * processes waiting for some frame to be done, and get the next frame
+ * submitted ASAP (so the hardware doesn't sit idle when there's work
+ * to do).
+ *
+ * When we take the binner out of memory interrupt, we need to
+ * allocate some new memory and pass it to the binner so that the
+ * current job can make progress.
+ */
+
+#include <linux/platform_device.h>
+
+#include <drm/drm_drv.h>
+
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+#include "vc4_trace.h"
+
+#define V3D_DRIVER_IRQS (V3D_INT_OUTOMEM | \
+			 V3D_INT_FLDONE | \
+			 V3D_INT_FRDONE)
+
+DECLARE_WAIT_QUEUE_HEAD(render_wait);
+
+static void
+vc4_overflow_mem_work(struct work_struct *work)
+{
+	struct vc4_dev *vc4 =
+		container_of(work, struct vc4_dev, overflow_mem_work);
+	struct vc4_bo *bo;
+	int bin_bo_slot;
+	struct vc4_exec_info *exec;
+	unsigned long irqflags;
+
+	mutex_lock(&vc4->bin_bo_lock);
+
+	if (!vc4->bin_bo)
+		goto complete;
+
+	bo = vc4->bin_bo;
+
+	bin_bo_slot = vc4_v3d_get_bin_slot(vc4);
+	if (bin_bo_slot < 0) {
+		DRM_ERROR("Couldn't allocate binner overflow mem\n");
+		goto complete;
+	}
+
+	spin_lock_irqsave(&vc4->job_lock, irqflags);
+
+	if (vc4->bin_alloc_overflow) {
+		/* If we had overflow memory allocated previously,
+		 * then that chunk will free when the current bin job
+		 * is done.  If we don't have a bin job running, then
+		 * the chunk will be done whenever the list of render
+		 * jobs has drained.
+		 */
+		exec = vc4_first_bin_job(vc4);
+		if (!exec)
+			exec = vc4_last_render_job(vc4);
+		if (exec) {
+			exec->bin_slots |= vc4->bin_alloc_overflow;
+		} else {
+			/* There's nothing queued in the hardware, so
+			 * the old slot is free immediately.
+			 */
+			vc4->bin_alloc_used &= ~vc4->bin_alloc_overflow;
+		}
+	}
+	vc4->bin_alloc_overflow = BIT(bin_bo_slot);
+
+	V3D_WRITE(V3D_BPOA, bo->base.dma_addr + bin_bo_slot * vc4->bin_alloc_size);
+	V3D_WRITE(V3D_BPOS, bo->base.base.size);
+	V3D_WRITE(V3D_INTCTL, V3D_INT_OUTOMEM);
+	V3D_WRITE(V3D_INTENA, V3D_INT_OUTOMEM);
+	spin_unlock_irqrestore(&vc4->job_lock, irqflags);
+
+complete:
+	mutex_unlock(&vc4->bin_bo_lock);
+}
+
+static void
+vc4_irq_finish_bin_job(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_exec_info *next, *exec = vc4_first_bin_job(vc4);
+
+	if (!exec)
+		return;
+
+	trace_vc4_bcl_end_irq(dev, exec->seqno);
+
+	vc4_move_job_to_render(dev, exec);
+	next = vc4_first_bin_job(vc4);
+
+	/* Only submit the next job in the bin list if it matches the perfmon
+	 * attached to the one that just finished (or if both jobs don't have
+	 * perfmon attached to them).
+	 */
+	if (next && next->perfmon == exec->perfmon)
+		vc4_submit_next_bin_job(dev);
+}
+
+static void
+vc4_cancel_bin_job(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_exec_info *exec = vc4_first_bin_job(vc4);
+
+	if (!exec)
+		return;
+
+	/* Stop the perfmon so that the next bin job can be started. */
+	if (exec->perfmon)
+		vc4_perfmon_stop(vc4, exec->perfmon, false);
+
+	list_move_tail(&exec->head, &vc4->bin_job_list);
+	vc4_submit_next_bin_job(dev);
+}
+
+static void
+vc4_irq_finish_render_job(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_exec_info *exec = vc4_first_render_job(vc4);
+	struct vc4_exec_info *nextbin, *nextrender;
+
+	if (!exec)
+		return;
+
+	trace_vc4_rcl_end_irq(dev, exec->seqno);
+
+	vc4->finished_seqno++;
+	list_move_tail(&exec->head, &vc4->job_done_list);
+
+	nextbin = vc4_first_bin_job(vc4);
+	nextrender = vc4_first_render_job(vc4);
+
+	/* Only stop the perfmon if following jobs in the queue don't expect it
+	 * to be enabled.
+	 */
+	if (exec->perfmon && !nextrender &&
+	    (!nextbin || nextbin->perfmon != exec->perfmon))
+		vc4_perfmon_stop(vc4, exec->perfmon, true);
+
+	/* If there's a render job waiting, start it. If this is not the case
+	 * we may have to unblock the binner if it's been stalled because of
+	 * perfmon (this can be checked by comparing the perfmon attached to
+	 * the finished renderjob to the one attached to the next bin job: if
+	 * they don't match, this means the binner is stalled and should be
+	 * restarted).
+	 */
+	if (nextrender)
+		vc4_submit_next_render_job(dev);
+	else if (nextbin && nextbin->perfmon != exec->perfmon)
+		vc4_submit_next_bin_job(dev);
+
+	if (exec->fence) {
+		dma_fence_signal_locked(exec->fence);
+		dma_fence_put(exec->fence);
+		exec->fence = NULL;
+	}
+
+	wake_up_all(&vc4->job_wait_queue);
+	schedule_work(&vc4->job_done_work);
+}
+
+static irqreturn_t
+vc4_irq(int irq, void *arg)
+{
+	struct drm_device *dev = arg;
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	uint32_t intctl;
+	irqreturn_t status = IRQ_NONE;
+
+	barrier();
+	intctl = V3D_READ(V3D_INTCTL);
+
+	/* Acknowledge the interrupts we're handling here. The binner
+	 * last flush / render frame done interrupt will be cleared,
+	 * while OUTOMEM will stay high until the underlying cause is
+	 * cleared.
+	 */
+	V3D_WRITE(V3D_INTCTL, intctl);
+
+	if (intctl & V3D_INT_OUTOMEM) {
+		/* Disable OUTOMEM until the work is done. */
+		V3D_WRITE(V3D_INTDIS, V3D_INT_OUTOMEM);
+		schedule_work(&vc4->overflow_mem_work);
+		status = IRQ_HANDLED;
+	}
+
+	if (intctl & V3D_INT_FLDONE) {
+		spin_lock(&vc4->job_lock);
+		vc4_irq_finish_bin_job(dev);
+		spin_unlock(&vc4->job_lock);
+		status = IRQ_HANDLED;
+	}
+
+	if (intctl & V3D_INT_FRDONE) {
+		spin_lock(&vc4->job_lock);
+		vc4_irq_finish_render_job(dev);
+		spin_unlock(&vc4->job_lock);
+		status = IRQ_HANDLED;
+	}
+
+	return status;
+}
+
+static void
+vc4_irq_prepare(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+	if (!vc4->v3d)
+		return;
+
+	init_waitqueue_head(&vc4->job_wait_queue);
+	INIT_WORK(&vc4->overflow_mem_work, vc4_overflow_mem_work);
+
+	/* Clear any pending interrupts someone might have left around
+	 * for us.
+	 */
+	V3D_WRITE(V3D_INTCTL, V3D_DRIVER_IRQS);
+}
+
+void
+vc4_irq_enable(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+	if (WARN_ON_ONCE(vc4->is_vc5))
+		return;
+
+	if (!vc4->v3d)
+		return;
+
+	/* Enable the render done interrupts. The out-of-memory interrupt is
+	 * enabled as soon as we have a binner BO allocated.
+	 */
+	V3D_WRITE(V3D_INTENA, V3D_INT_FLDONE | V3D_INT_FRDONE);
+}
+
+void
+vc4_irq_disable(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+	if (WARN_ON_ONCE(vc4->is_vc5))
+		return;
+
+	if (!vc4->v3d)
+		return;
+
+	/* Disable sending interrupts for our driver's IRQs. */
+	V3D_WRITE(V3D_INTDIS, V3D_DRIVER_IRQS);
+
+	/* Clear any pending interrupts we might have left. */
+	V3D_WRITE(V3D_INTCTL, V3D_DRIVER_IRQS);
+
+	/* Finish any interrupt handler still in flight. */
+	synchronize_irq(vc4->irq);
+
+	cancel_work_sync(&vc4->overflow_mem_work);
+}
+
+int vc4_irq_install(struct drm_device *dev, int irq)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	int ret;
+
+	if (WARN_ON_ONCE(vc4->is_vc5))
+		return -ENODEV;
+
+	if (irq == IRQ_NOTCONNECTED)
+		return -ENOTCONN;
+
+	vc4_irq_prepare(dev);
+
+	ret = request_irq(irq, vc4_irq, 0, dev->driver->name, dev);
+	if (ret)
+		return ret;
+
+	vc4_irq_enable(dev);
+
+	return 0;
+}
+
+void vc4_irq_uninstall(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+	if (WARN_ON_ONCE(vc4->is_vc5))
+		return;
+
+	vc4_irq_disable(dev);
+	free_irq(vc4->irq, dev);
+}
+
+/** Reinitializes interrupt registers when a GPU reset is performed. */
+void vc4_irq_reset(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	unsigned long irqflags;
+
+	if (WARN_ON_ONCE(vc4->is_vc5))
+		return;
+
+	/* Acknowledge any stale IRQs. */
+	V3D_WRITE(V3D_INTCTL, V3D_DRIVER_IRQS);
+
+	/*
+	 * Turn all our interrupts on.  Binner out of memory is the
+	 * only one we expect to trigger at this point, since we've
+	 * just come from poweron and haven't supplied any overflow
+	 * memory yet.
+	 */
+	V3D_WRITE(V3D_INTENA, V3D_DRIVER_IRQS);
+
+	spin_lock_irqsave(&vc4->job_lock, irqflags);
+	vc4_cancel_bin_job(dev);
+	vc4_irq_finish_render_job(dev);
+	spin_unlock_irqrestore(&vc4->job_lock, irqflags);
+}