diff options
Diffstat (limited to 'drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h')
| -rw-r--r-- | drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h b/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h new file mode 100644 index 000000000..4db01bbef --- /dev/null +++ b/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h @@ -0,0 +1,220 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * ISH registers definitions + * + * Copyright (c) 2012-2016, Intel Corporation. + */ + +#ifndef _ISHTP_ISH_REGS_H_ +#define _ISHTP_ISH_REGS_H_ + + +/*** IPC PCI Offsets and sizes ***/ +/* ISH IPC Base Address */ +#define IPC_REG_BASE 0x0000 +/* Peripheral Interrupt Status Register */ +#define IPC_REG_PISR_CHV_AB (IPC_REG_BASE + 0x00) +/* Peripheral Interrupt Mask Register */ +#define IPC_REG_PIMR_CHV_AB (IPC_REG_BASE + 0x04) +/*BXT, CHV_K0*/ +/*Peripheral Interrupt Status Register */ +#define IPC_REG_PISR_BXT (IPC_REG_BASE + 0x0C) +/*Peripheral Interrupt Mask Register */ +#define IPC_REG_PIMR_BXT (IPC_REG_BASE + 0x08) +/***********************************/ +/* ISH Host Firmware status Register */ +#define IPC_REG_ISH_HOST_FWSTS (IPC_REG_BASE + 0x34) +/* Host Communication Register */ +#define IPC_REG_HOST_COMM (IPC_REG_BASE + 0x38) +/* Reset register */ +#define IPC_REG_ISH_RST (IPC_REG_BASE + 0x44) + +/* Inbound doorbell register Host to ISH */ +#define IPC_REG_HOST2ISH_DRBL (IPC_REG_BASE + 0x48) +/* Outbound doorbell register ISH to Host */ +#define IPC_REG_ISH2HOST_DRBL (IPC_REG_BASE + 0x54) +/* ISH to HOST message registers */ +#define IPC_REG_ISH2HOST_MSG (IPC_REG_BASE + 0x60) +/* HOST to ISH message registers */ +#define IPC_REG_HOST2ISH_MSG (IPC_REG_BASE + 0xE0) +/* REMAP2 to enable DMA (D3 RCR) */ +#define IPC_REG_ISH_RMP2 (IPC_REG_BASE + 0x368) + +#define IPC_REG_MAX (IPC_REG_BASE + 0x400) + +/*** register bits - HISR ***/ +/* bit corresponds HOST2ISH interrupt in PISR and PIMR registers */ +#define IPC_INT_HOST2ISH_BIT (1<<0) +/***********************************/ +/*CHV_A0, CHV_B0*/ +/* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */ +#define IPC_INT_ISH2HOST_BIT_CHV_AB (1<<3) +/*BXT, CHV_K0*/ +/* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */ +#define IPC_INT_ISH2HOST_BIT_BXT (1<<0) +/***********************************/ + +/* bit corresponds ISH2HOST busy clear interrupt in PIMR register */ +#define IPC_INT_ISH2HOST_CLR_MASK_BIT (1<<11) + +/* offset of ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */ +#define IPC_INT_ISH2HOST_CLR_OFFS (0) + +/* bit corresponds ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */ +#define IPC_INT_ISH2HOST_CLR_BIT (1<<IPC_INT_ISH2HOST_CLR_OFFS) + +/* bit corresponds busy bit in doorbell registers */ +#define IPC_DRBL_BUSY_OFFS (31) +#define IPC_DRBL_BUSY_BIT (1<<IPC_DRBL_BUSY_OFFS) + +#define IPC_HOST_OWNS_MSG_OFFS (30) + +/* + * A0: bit means that host owns MSGnn registers and is reading them. + * ISH FW may not write to them + */ +#define IPC_HOST_OWNS_MSG_BIT (1<<IPC_HOST_OWNS_MSG_OFFS) + +/* + * Host status bits (HOSTCOMM) + */ +/* bit corresponds host ready bit in Host Status Register (HOST_COMM) */ +#define IPC_HOSTCOMM_READY_OFFS (7) +#define IPC_HOSTCOMM_READY_BIT (1<<IPC_HOSTCOMM_READY_OFFS) + +/***********************************/ +/*CHV_A0, CHV_B0*/ +#define IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB (31) +#define IPC_HOSTCOMM_INT_EN_BIT_CHV_AB \ + (1<<IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB) +/*BXT, CHV_K0*/ +#define IPC_PIMR_INT_EN_OFFS_BXT (0) +#define IPC_PIMR_INT_EN_BIT_BXT (1<<IPC_PIMR_INT_EN_OFFS_BXT) + +#define IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT (8) +#define IPC_HOST2ISH_BUSYCLEAR_MASK_BIT \ + (1<<IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT) +/***********************************/ +/* + * both Host and ISH have ILUP at bit 0 + * bit corresponds host ready bit in both status registers + */ +#define IPC_ILUP_OFFS (0) +#define IPC_ILUP_BIT (1<<IPC_ILUP_OFFS) + +/* + * ISH FW status bits in ISH FW Status Register + */ +#define IPC_ISH_FWSTS_SHIFT 12 +#define IPC_ISH_FWSTS_MASK GENMASK(15, 12) +#define IPC_GET_ISH_FWSTS(status) \ + (((status) & IPC_ISH_FWSTS_MASK) >> IPC_ISH_FWSTS_SHIFT) + +/* + * FW status bits (relevant) + */ +#define IPC_FWSTS_ILUP 0x1 +#define IPC_FWSTS_ISHTP_UP (1<<1) +#define IPC_FWSTS_DMA0 (1<<16) +#define IPC_FWSTS_DMA1 (1<<17) +#define IPC_FWSTS_DMA2 (1<<18) +#define IPC_FWSTS_DMA3 (1<<19) + +#define IPC_ISH_IN_DMA \ + (IPC_FWSTS_DMA0 | IPC_FWSTS_DMA1 | IPC_FWSTS_DMA2 | IPC_FWSTS_DMA3) + +/* bit corresponds host ready bit in ISH FW Status Register */ +#define IPC_ISH_ISHTP_READY_OFFS (1) +#define IPC_ISH_ISHTP_READY_BIT (1<<IPC_ISH_ISHTP_READY_OFFS) + +#define IPC_RMP2_DMA_ENABLED 0x1 /* Value to enable DMA, per D3 RCR */ + +#define IPC_MSG_MAX_SIZE 0x80 + + +#define IPC_HEADER_LENGTH_MASK 0x03FF +#define IPC_HEADER_PROTOCOL_MASK 0x0F +#define IPC_HEADER_MNG_CMD_MASK 0x0F + +#define IPC_HEADER_LENGTH_OFFSET 0 +#define IPC_HEADER_PROTOCOL_OFFSET 10 +#define IPC_HEADER_MNG_CMD_OFFSET 16 + +#define IPC_HEADER_GET_LENGTH(drbl_reg) \ + (((drbl_reg) >> IPC_HEADER_LENGTH_OFFSET)&IPC_HEADER_LENGTH_MASK) +#define IPC_HEADER_GET_PROTOCOL(drbl_reg) \ + (((drbl_reg) >> IPC_HEADER_PROTOCOL_OFFSET)&IPC_HEADER_PROTOCOL_MASK) +#define IPC_HEADER_GET_MNG_CMD(drbl_reg) \ + (((drbl_reg) >> IPC_HEADER_MNG_CMD_OFFSET)&IPC_HEADER_MNG_CMD_MASK) + +#define IPC_IS_BUSY(drbl_reg) \ + (((drbl_reg)&IPC_DRBL_BUSY_BIT) == ((uint32_t)IPC_DRBL_BUSY_BIT)) + +/***********************************/ +/*CHV_A0, CHV_B0*/ +#define IPC_INT_FROM_ISH_TO_HOST_CHV_AB(drbl_reg) \ + (((drbl_reg)&IPC_INT_ISH2HOST_BIT_CHV_AB) == \ + ((u32)IPC_INT_ISH2HOST_BIT_CHV_AB)) +/*BXT, CHV_K0*/ +#define IPC_INT_FROM_ISH_TO_HOST_BXT(drbl_reg) \ + (((drbl_reg)&IPC_INT_ISH2HOST_BIT_BXT) == \ + ((u32)IPC_INT_ISH2HOST_BIT_BXT)) +/***********************************/ + +#define IPC_BUILD_HEADER(length, protocol, busy) \ + (((busy)<<IPC_DRBL_BUSY_OFFS) | \ + ((protocol) << IPC_HEADER_PROTOCOL_OFFSET) | \ + ((length)<<IPC_HEADER_LENGTH_OFFSET)) + +#define IPC_BUILD_MNG_MSG(cmd, length) \ + (((1)<<IPC_DRBL_BUSY_OFFS)| \ + ((IPC_PROTOCOL_MNG)<<IPC_HEADER_PROTOCOL_OFFSET)| \ + ((cmd)<<IPC_HEADER_MNG_CMD_OFFSET)| \ + ((length)<<IPC_HEADER_LENGTH_OFFSET)) + + +#define IPC_SET_HOST_READY(host_status) \ + ((host_status) |= (IPC_HOSTCOMM_READY_BIT)) + +#define IPC_SET_HOST_ILUP(host_status) \ + ((host_status) |= (IPC_ILUP_BIT)) + +#define IPC_CLEAR_HOST_READY(host_status) \ + ((host_status) ^= (IPC_HOSTCOMM_READY_BIT)) + +#define IPC_CLEAR_HOST_ILUP(host_status) \ + ((host_status) ^= (IPC_ILUP_BIT)) + +/* todo - temp until PIMR HW ready */ +#define IPC_HOST_BUSY_READING_OFFS 6 + +/* bit corresponds host ready bit in Host Status Register (HOST_COMM) */ +#define IPC_HOST_BUSY_READING_BIT (1<<IPC_HOST_BUSY_READING_OFFS) + +#define IPC_SET_HOST_BUSY_READING(host_status) \ + ((host_status) |= (IPC_HOST_BUSY_READING_BIT)) + +#define IPC_CLEAR_HOST_BUSY_READING(host_status)\ + ((host_status) ^= (IPC_HOST_BUSY_READING_BIT)) + + +#define IPC_IS_ISH_ISHTP_READY(ish_status) \ + (((ish_status) & IPC_ISH_ISHTP_READY_BIT) == \ + ((uint32_t)IPC_ISH_ISHTP_READY_BIT)) + +#define IPC_IS_ISH_ILUP(ish_status) \ + (((ish_status) & IPC_ILUP_BIT) == ((uint32_t)IPC_ILUP_BIT)) + + +#define IPC_PROTOCOL_ISHTP 1 +#define IPC_PROTOCOL_MNG 3 + +#define MNG_RX_CMPL_ENABLE 0 +#define MNG_RX_CMPL_DISABLE 1 +#define MNG_RX_CMPL_INDICATION 2 +#define MNG_RESET_NOTIFY 3 +#define MNG_RESET_NOTIFY_ACK 4 +#define MNG_SYNC_FW_CLOCK 5 +#define MNG_ILLEGAL_CMD 0xFF + +#endif /* _ISHTP_ISH_REGS_H_ */ |