diff options
Diffstat (limited to 'drivers/hwmon/w83627ehf.c')
| -rw-r--r-- | drivers/hwmon/w83627ehf.c | 2160 |
1 files changed, 2160 insertions, 0 deletions
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c new file mode 100644 index 000000000..939d4c35e --- /dev/null +++ b/drivers/hwmon/w83627ehf.c @@ -0,0 +1,2160 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * w83627ehf - Driver for the hardware monitoring functionality of + * the Winbond W83627EHF Super-I/O chip + * Copyright (C) 2005-2012 Jean Delvare <jdelvare@suse.de> + * Copyright (C) 2006 Yuan Mu (Winbond), + * Rudolf Marek <r.marek@assembler.cz> + * David Hubbard <david.c.hubbard@gmail.com> + * Daniel J Blueman <daniel.blueman@gmail.com> + * Copyright (C) 2010 Sheng-Yuan Huang (Nuvoton) (PS00) + * + * Shamelessly ripped from the w83627hf driver + * Copyright (C) 2003 Mark Studebaker + * + * Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help + * in testing and debugging this driver. + * + * This driver also supports the W83627EHG, which is the lead-free + * version of the W83627EHF. + * + * Supports the following chips: + * + * Chip #vin #fan #pwm #temp chip IDs man ID + * w83627ehf 10 5 4 3 0x8850 0x88 0x5ca3 + * 0x8860 0xa1 + * w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3 + * w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3 + * w83627uhg 8 2 2 3 0xa230 0xc1 0x5ca3 + * w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3 + * w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3 + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/hwmon-vid.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/acpi.h> +#include <linux/io.h> +#include "lm75.h" + +enum kinds { + w83627ehf, w83627dhg, w83627dhg_p, w83627uhg, + w83667hg, w83667hg_b, +}; + +/* used to set data->name = w83627ehf_device_names[data->sio_kind] */ +static const char * const w83627ehf_device_names[] = { + "w83627ehf", + "w83627dhg", + "w83627dhg", + "w83627uhg", + "w83667hg", + "w83667hg", +}; + +static unsigned short force_id; +module_param(force_id, ushort, 0); +MODULE_PARM_DESC(force_id, "Override the detected device ID"); + +#define DRVNAME "w83627ehf" + +/* + * Super-I/O constants and functions + */ + +#define W83627EHF_LD_HWM 0x0b +#define W83667HG_LD_VID 0x0d + +#define SIO_REG_LDSEL 0x07 /* Logical device select */ +#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ +#define SIO_REG_EN_VRM10 0x2C /* GPIO3, GPIO4 selection */ +#define SIO_REG_ENABLE 0x30 /* Logical device enable */ +#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ +#define SIO_REG_VID_CTRL 0xF0 /* VID control */ +#define SIO_REG_VID_DATA 0xF1 /* VID data */ + +#define SIO_W83627EHF_ID 0x8850 +#define SIO_W83627EHG_ID 0x8860 +#define SIO_W83627DHG_ID 0xa020 +#define SIO_W83627DHG_P_ID 0xb070 +#define SIO_W83627UHG_ID 0xa230 +#define SIO_W83667HG_ID 0xa510 +#define SIO_W83667HG_B_ID 0xb350 +#define SIO_ID_MASK 0xFFF0 + +static inline void +superio_outb(int ioreg, int reg, int val) +{ + outb(reg, ioreg); + outb(val, ioreg + 1); +} + +static inline int +superio_inb(int ioreg, int reg) +{ + outb(reg, ioreg); + return inb(ioreg + 1); +} + +static inline void +superio_select(int ioreg, int ld) +{ + outb(SIO_REG_LDSEL, ioreg); + outb(ld, ioreg + 1); +} + +static inline int +superio_enter(int ioreg) +{ + if (!request_muxed_region(ioreg, 2, DRVNAME)) + return -EBUSY; + + outb(0x87, ioreg); + outb(0x87, ioreg); + + return 0; +} + +static inline void +superio_exit(int ioreg) +{ + outb(0xaa, ioreg); + outb(0x02, ioreg); + outb(0x02, ioreg + 1); + release_region(ioreg, 2); +} + +/* + * ISA constants + */ + +#define IOREGION_ALIGNMENT (~7) +#define IOREGION_OFFSET 5 +#define IOREGION_LENGTH 2 +#define ADDR_REG_OFFSET 0 +#define DATA_REG_OFFSET 1 + +#define W83627EHF_REG_BANK 0x4E +#define W83627EHF_REG_CONFIG 0x40 + +/* + * Not currently used: + * REG_MAN_ID has the value 0x5ca3 for all supported chips. + * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model. + * REG_MAN_ID is at port 0x4f + * REG_CHIP_ID is at port 0x58 + */ + +static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 }; +static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c }; + +/* The W83627EHF registers for nr=7,8,9 are in bank 5 */ +#define W83627EHF_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \ + (0x554 + (((nr) - 7) * 2))) +#define W83627EHF_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \ + (0x555 + (((nr) - 7) * 2))) +#define W83627EHF_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \ + (0x550 + (nr) - 7)) + +static const u16 W83627EHF_REG_TEMP[] = { 0x27, 0x150, 0x250, 0x7e }; +static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x3a, 0x153, 0x253, 0 }; +static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x39, 0x155, 0x255, 0 }; +static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0 }; + +/* Fan clock dividers are spread over the following five registers */ +#define W83627EHF_REG_FANDIV1 0x47 +#define W83627EHF_REG_FANDIV2 0x4B +#define W83627EHF_REG_VBAT 0x5D +#define W83627EHF_REG_DIODE 0x59 +#define W83627EHF_REG_SMI_OVT 0x4C + +#define W83627EHF_REG_ALARM1 0x459 +#define W83627EHF_REG_ALARM2 0x45A +#define W83627EHF_REG_ALARM3 0x45B + +#define W83627EHF_REG_CASEOPEN_DET 0x42 /* SMI STATUS #2 */ +#define W83627EHF_REG_CASEOPEN_CLR 0x46 /* SMI MASK #3 */ + +/* SmartFan registers */ +#define W83627EHF_REG_FAN_STEPUP_TIME 0x0f +#define W83627EHF_REG_FAN_STEPDOWN_TIME 0x0e + +/* DC or PWM output fan configuration */ +static const u8 W83627EHF_REG_PWM_ENABLE[] = { + 0x04, /* SYS FAN0 output mode and PWM mode */ + 0x04, /* CPU FAN0 output mode and PWM mode */ + 0x12, /* AUX FAN mode */ + 0x62, /* CPU FAN1 mode */ +}; + +static const u8 W83627EHF_PWM_MODE_SHIFT[] = { 0, 1, 0, 6 }; +static const u8 W83627EHF_PWM_ENABLE_SHIFT[] = { 2, 4, 1, 4 }; + +/* FAN Duty Cycle, be used to control */ +static const u16 W83627EHF_REG_PWM[] = { 0x01, 0x03, 0x11, 0x61 }; +static const u16 W83627EHF_REG_TARGET[] = { 0x05, 0x06, 0x13, 0x63 }; +static const u8 W83627EHF_REG_TOLERANCE[] = { 0x07, 0x07, 0x14, 0x62 }; + +/* Advanced Fan control, some values are common for all fans */ +static const u16 W83627EHF_REG_FAN_START_OUTPUT[] = { 0x0a, 0x0b, 0x16, 0x65 }; +static const u16 W83627EHF_REG_FAN_STOP_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 }; +static const u16 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0c, 0x0d, 0x17, 0x66 }; + +static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON[] + = { 0xff, 0x67, 0xff, 0x69 }; +static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON[] + = { 0xff, 0x68, 0xff, 0x6a }; + +static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B[] = { 0x67, 0x69, 0x6b }; +static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[] + = { 0x68, 0x6a, 0x6c }; + +static const u16 W83627EHF_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456 }; + +static const char *const w83667hg_b_temp_label[] = { + "SYSTIN", + "CPUTIN", + "AUXTIN", + "AMDTSI", + "PECI Agent 1", + "PECI Agent 2", + "PECI Agent 3", + "PECI Agent 4" +}; + +#define NUM_REG_TEMP ARRAY_SIZE(W83627EHF_REG_TEMP) + +static int is_word_sized(u16 reg) +{ + return ((((reg & 0xff00) == 0x100 + || (reg & 0xff00) == 0x200) + && ((reg & 0x00ff) == 0x50 + || (reg & 0x00ff) == 0x53 + || (reg & 0x00ff) == 0x55)) + || (reg & 0xfff0) == 0x630 + || reg == 0x640 || reg == 0x642 + || ((reg & 0xfff0) == 0x650 + && (reg & 0x000f) >= 0x06) + || reg == 0x73 || reg == 0x75 || reg == 0x77 + ); +} + +/* + * Conversions + */ + +/* 1 is PWM mode, output in ms */ +static inline unsigned int step_time_from_reg(u8 reg, u8 mode) +{ + return mode ? 100 * reg : 400 * reg; +} + +static inline u8 step_time_to_reg(unsigned int msec, u8 mode) +{ + return clamp_val((mode ? (msec + 50) / 100 : (msec + 200) / 400), + 1, 255); +} + +static unsigned int fan_from_reg8(u16 reg, unsigned int divreg) +{ + if (reg == 0 || reg == 255) + return 0; + return 1350000U / (reg << divreg); +} + +static inline unsigned int +div_from_reg(u8 reg) +{ + return 1 << reg; +} + +/* + * Some of the voltage inputs have internal scaling, the tables below + * contain 8 (the ADC LSB in mV) * scaling factor * 100 + */ +static const u16 scale_in_common[10] = { + 800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 800 +}; +static const u16 scale_in_w83627uhg[9] = { + 800, 800, 3328, 3424, 800, 800, 0, 3328, 3400 +}; + +static inline long in_from_reg(u8 reg, u8 nr, const u16 *scale_in) +{ + return DIV_ROUND_CLOSEST(reg * scale_in[nr], 100); +} + +static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scale_in) +{ + return clamp_val(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0, 255); +} + +/* + * Data structures and manipulation thereof + */ + +struct w83627ehf_data { + int addr; /* IO base of hw monitor block */ + const char *name; + + struct mutex lock; + + u16 reg_temp[NUM_REG_TEMP]; + u16 reg_temp_over[NUM_REG_TEMP]; + u16 reg_temp_hyst[NUM_REG_TEMP]; + u16 reg_temp_config[NUM_REG_TEMP]; + u8 temp_src[NUM_REG_TEMP]; + const char * const *temp_label; + + const u16 *REG_FAN_MAX_OUTPUT; + const u16 *REG_FAN_STEP_OUTPUT; + const u16 *scale_in; + + struct mutex update_lock; + bool valid; /* true if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + /* Register values */ + u8 bank; /* current register bank */ + u8 in_num; /* number of in inputs we have */ + u8 in[10]; /* Register value */ + u8 in_max[10]; /* Register value */ + u8 in_min[10]; /* Register value */ + unsigned int rpm[5]; + u16 fan_min[5]; + u8 fan_div[5]; + u8 has_fan; /* some fan inputs can be disabled */ + u8 has_fan_min; /* some fans don't have min register */ + u8 temp_type[3]; + s8 temp_offset[3]; + s16 temp[9]; + s16 temp_max[9]; + s16 temp_max_hyst[9]; + u32 alarms; + u8 caseopen; + + u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */ + u8 pwm_enable[4]; /* 1->manual + * 2->thermal cruise mode (also called SmartFan I) + * 3->fan speed cruise mode + * 4->variable thermal cruise (also called + * SmartFan III) + * 5->enhanced variable thermal cruise (also called + * SmartFan IV) + */ + u8 pwm_enable_orig[4]; /* original value of pwm_enable */ + u8 pwm_num; /* number of pwm */ + u8 pwm[4]; + u8 target_temp[4]; + u8 tolerance[4]; + + u8 fan_start_output[4]; /* minimum fan speed when spinning up */ + u8 fan_stop_output[4]; /* minimum fan speed when spinning down */ + u8 fan_stop_time[4]; /* time at minimum before disabling fan */ + u8 fan_max_output[4]; /* maximum fan speed */ + u8 fan_step_output[4]; /* rate of change output value */ + + u8 vid; + u8 vrm; + + u16 have_temp; + u16 have_temp_offset; + u8 in6_skip:1; + u8 temp3_val_only:1; + u8 have_vid:1; + + /* Remember extra register values over suspend/resume */ + u8 vbat; + u8 fandiv1; + u8 fandiv2; +}; + +struct w83627ehf_sio_data { + int sioreg; + enum kinds kind; +}; + +/* + * On older chips, only registers 0x50-0x5f are banked. + * On more recent chips, all registers are banked. + * Assume that is the case and set the bank number for each access. + * Cache the bank number so it only needs to be set if it changes. + */ +static inline void w83627ehf_set_bank(struct w83627ehf_data *data, u16 reg) +{ + u8 bank = reg >> 8; + if (data->bank != bank) { + outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET); + outb_p(bank, data->addr + DATA_REG_OFFSET); + data->bank = bank; + } +} + +static u16 w83627ehf_read_value(struct w83627ehf_data *data, u16 reg) +{ + int res, word_sized = is_word_sized(reg); + + mutex_lock(&data->lock); + + w83627ehf_set_bank(data, reg); + outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); + res = inb_p(data->addr + DATA_REG_OFFSET); + if (word_sized) { + outb_p((reg & 0xff) + 1, + data->addr + ADDR_REG_OFFSET); + res = (res << 8) + inb_p(data->addr + DATA_REG_OFFSET); + } + + mutex_unlock(&data->lock); + return res; +} + +static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg, + u16 value) +{ + int word_sized = is_word_sized(reg); + + mutex_lock(&data->lock); + + w83627ehf_set_bank(data, reg); + outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); + if (word_sized) { + outb_p(value >> 8, data->addr + DATA_REG_OFFSET); + outb_p((reg & 0xff) + 1, + data->addr + ADDR_REG_OFFSET); + } + outb_p(value & 0xff, data->addr + DATA_REG_OFFSET); + + mutex_unlock(&data->lock); + return 0; +} + +/* We left-align 8-bit temperature values to make the code simpler */ +static u16 w83627ehf_read_temp(struct w83627ehf_data *data, u16 reg) +{ + u16 res; + + res = w83627ehf_read_value(data, reg); + if (!is_word_sized(reg)) + res <<= 8; + + return res; +} + +static int w83627ehf_write_temp(struct w83627ehf_data *data, u16 reg, + u16 value) +{ + if (!is_word_sized(reg)) + value >>= 8; + return w83627ehf_write_value(data, reg, value); +} + +/* This function assumes that the caller holds data->update_lock */ +static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr) +{ + u8 reg; + + switch (nr) { + case 0: + reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0xcf) + | ((data->fan_div[0] & 0x03) << 4); + /* fan5 input control bit is write only, compute the value */ + reg |= (data->has_fan & (1 << 4)) ? 1 : 0; + w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg); + reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xdf) + | ((data->fan_div[0] & 0x04) << 3); + w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); + break; + case 1: + reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0x3f) + | ((data->fan_div[1] & 0x03) << 6); + /* fan5 input control bit is write only, compute the value */ + reg |= (data->has_fan & (1 << 4)) ? 1 : 0; + w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg); + reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xbf) + | ((data->fan_div[1] & 0x04) << 4); + w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); + break; + case 2: + reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV2) & 0x3f) + | ((data->fan_div[2] & 0x03) << 6); + w83627ehf_write_value(data, W83627EHF_REG_FANDIV2, reg); + reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0x7f) + | ((data->fan_div[2] & 0x04) << 5); + w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); + break; + case 3: + reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0xfc) + | (data->fan_div[3] & 0x03); + w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg); + reg = (w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT) & 0x7f) + | ((data->fan_div[3] & 0x04) << 5); + w83627ehf_write_value(data, W83627EHF_REG_SMI_OVT, reg); + break; + case 4: + reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0x73) + | ((data->fan_div[4] & 0x03) << 2) + | ((data->fan_div[4] & 0x04) << 5); + w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg); + break; + } +} + +static void w83627ehf_update_fan_div(struct w83627ehf_data *data) +{ + int i; + + i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1); + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = (i >> 6) & 0x03; + i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2); + data->fan_div[2] = (i >> 6) & 0x03; + i = w83627ehf_read_value(data, W83627EHF_REG_VBAT); + data->fan_div[0] |= (i >> 3) & 0x04; + data->fan_div[1] |= (i >> 4) & 0x04; + data->fan_div[2] |= (i >> 5) & 0x04; + if (data->has_fan & ((1 << 3) | (1 << 4))) { + i = w83627ehf_read_value(data, W83627EHF_REG_DIODE); + data->fan_div[3] = i & 0x03; + data->fan_div[4] = ((i >> 2) & 0x03) + | ((i >> 5) & 0x04); + } + if (data->has_fan & (1 << 3)) { + i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT); + data->fan_div[3] |= (i >> 5) & 0x04; + } +} + +static void w83627ehf_update_pwm(struct w83627ehf_data *data) +{ + int i; + int pwmcfg = 0, tolerance = 0; /* shut up the compiler */ + + for (i = 0; i < data->pwm_num; i++) { + if (!(data->has_fan & (1 << i))) + continue; + + /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */ + if (i != 1) { + pwmcfg = w83627ehf_read_value(data, + W83627EHF_REG_PWM_ENABLE[i]); + tolerance = w83627ehf_read_value(data, + W83627EHF_REG_TOLERANCE[i]); + } + data->pwm_mode[i] = + ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1; + data->pwm_enable[i] = ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i]) + & 3) + 1; + data->pwm[i] = w83627ehf_read_value(data, W83627EHF_REG_PWM[i]); + + data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) & 0x0f; + } +} + +static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) +{ + struct w83627ehf_data *data = dev_get_drvdata(dev); + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ/2) + || !data->valid) { + /* Fan clock dividers */ + w83627ehf_update_fan_div(data); + + /* Measured voltages and limits */ + for (i = 0; i < data->in_num; i++) { + if ((i == 6) && data->in6_skip) + continue; + + data->in[i] = w83627ehf_read_value(data, + W83627EHF_REG_IN(i)); + data->in_min[i] = w83627ehf_read_value(data, + W83627EHF_REG_IN_MIN(i)); + data->in_max[i] = w83627ehf_read_value(data, + W83627EHF_REG_IN_MAX(i)); + } + + /* Measured fan speeds and limits */ + for (i = 0; i < 5; i++) { + u16 reg; + + if (!(data->has_fan & (1 << i))) + continue; + + reg = w83627ehf_read_value(data, W83627EHF_REG_FAN[i]); + data->rpm[i] = fan_from_reg8(reg, data->fan_div[i]); + + if (data->has_fan_min & (1 << i)) + data->fan_min[i] = w83627ehf_read_value(data, + W83627EHF_REG_FAN_MIN[i]); + + /* + * If we failed to measure the fan speed and clock + * divider can be increased, let's try that for next + * time + */ + if (reg >= 0xff && data->fan_div[i] < 0x07) { + dev_dbg(dev, + "Increasing fan%d clock divider from %u to %u\n", + i + 1, div_from_reg(data->fan_div[i]), + div_from_reg(data->fan_div[i] + 1)); + data->fan_div[i]++; + w83627ehf_write_fan_div(data, i); + /* Preserve min limit if possible */ + if ((data->has_fan_min & (1 << i)) + && data->fan_min[i] >= 2 + && data->fan_min[i] != 255) + w83627ehf_write_value(data, + W83627EHF_REG_FAN_MIN[i], + (data->fan_min[i] /= 2)); + } + } + + w83627ehf_update_pwm(data); + + for (i = 0; i < data->pwm_num; i++) { + if (!(data->has_fan & (1 << i))) + continue; + + data->fan_start_output[i] = + w83627ehf_read_value(data, + W83627EHF_REG_FAN_START_OUTPUT[i]); + data->fan_stop_output[i] = + w83627ehf_read_value(data, + W83627EHF_REG_FAN_STOP_OUTPUT[i]); + data->fan_stop_time[i] = + w83627ehf_read_value(data, + W83627EHF_REG_FAN_STOP_TIME[i]); + + if (data->REG_FAN_MAX_OUTPUT && + data->REG_FAN_MAX_OUTPUT[i] != 0xff) + data->fan_max_output[i] = + w83627ehf_read_value(data, + data->REG_FAN_MAX_OUTPUT[i]); + + if (data->REG_FAN_STEP_OUTPUT && + data->REG_FAN_STEP_OUTPUT[i] != 0xff) + data->fan_step_output[i] = + w83627ehf_read_value(data, + data->REG_FAN_STEP_OUTPUT[i]); + + data->target_temp[i] = + w83627ehf_read_value(data, + W83627EHF_REG_TARGET[i]) & + (data->pwm_mode[i] == 1 ? 0x7f : 0xff); + } + + /* Measured temperatures and limits */ + for (i = 0; i < NUM_REG_TEMP; i++) { + if (!(data->have_temp & (1 << i))) + continue; + data->temp[i] = w83627ehf_read_temp(data, + data->reg_temp[i]); + if (data->reg_temp_over[i]) + data->temp_max[i] + = w83627ehf_read_temp(data, + data->reg_temp_over[i]); + if (data->reg_temp_hyst[i]) + data->temp_max_hyst[i] + = w83627ehf_read_temp(data, + data->reg_temp_hyst[i]); + if (i > 2) + continue; + if (data->have_temp_offset & (1 << i)) + data->temp_offset[i] + = w83627ehf_read_value(data, + W83627EHF_REG_TEMP_OFFSET[i]); + } + + data->alarms = w83627ehf_read_value(data, + W83627EHF_REG_ALARM1) | + (w83627ehf_read_value(data, + W83627EHF_REG_ALARM2) << 8) | + (w83627ehf_read_value(data, + W83627EHF_REG_ALARM3) << 16); + + data->caseopen = w83627ehf_read_value(data, + W83627EHF_REG_CASEOPEN_DET); + + data->last_updated = jiffies; + data->valid = true; + } + + mutex_unlock(&data->update_lock); + return data; +} + +#define store_in_reg(REG, reg) \ +static int \ +store_in_##reg(struct device *dev, struct w83627ehf_data *data, int channel, \ + long val) \ +{ \ + if (val < 0) \ + return -EINVAL; \ + mutex_lock(&data->update_lock); \ + data->in_##reg[channel] = in_to_reg(val, channel, data->scale_in); \ + w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(channel), \ + data->in_##reg[channel]); \ + mutex_unlock(&data->update_lock); \ + return 0; \ +} + +store_in_reg(MIN, min) +store_in_reg(MAX, max) + +static int +store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel, + long val) +{ + unsigned int reg; + u8 new_div; + + if (val < 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + if (!val) { + /* No min limit, alarm disabled */ + data->fan_min[channel] = 255; + new_div = data->fan_div[channel]; /* No change */ + dev_info(dev, "fan%u low limit and alarm disabled\n", + channel + 1); + } else if ((reg = 1350000U / val) >= 128 * 255) { + /* + * Speed below this value cannot possibly be represented, + * even with the highest divider (128) + */ + data->fan_min[channel] = 254; + new_div = 7; /* 128 == (1 << 7) */ + dev_warn(dev, + "fan%u low limit %lu below minimum %u, set to minimum\n", + channel + 1, val, fan_from_reg8(254, 7)); + } else if (!reg) { + /* + * Speed above this value cannot possibly be represented, + * even with the lowest divider (1) + */ + data->fan_min[channel] = 1; + new_div = 0; /* 1 == (1 << 0) */ + dev_warn(dev, + "fan%u low limit %lu above maximum %u, set to maximum\n", + channel + 1, val, fan_from_reg8(1, 0)); + } else { + /* + * Automatically pick the best divider, i.e. the one such + * that the min limit will correspond to a register value + * in the 96..192 range + */ + new_div = 0; + while (reg > 192 && new_div < 7) { + reg >>= 1; + new_div++; + } + data->fan_min[channel] = reg; + } + + /* + * Write both the fan clock divider (if it changed) and the new + * fan min (unconditionally) + */ + if (new_div != data->fan_div[channel]) { + dev_dbg(dev, "fan%u clock divider changed from %u to %u\n", + channel + 1, div_from_reg(data->fan_div[channel]), + div_from_reg(new_div)); + data->fan_div[channel] = new_div; + w83627ehf_write_fan_div(data, channel); + /* Give the chip time to sample a new speed value */ + data->last_updated = jiffies; + } + + w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[channel], + data->fan_min[channel]); + mutex_unlock(&data->update_lock); + + return 0; +} + +#define store_temp_reg(addr, reg) \ +static int \ +store_##reg(struct device *dev, struct w83627ehf_data *data, int channel, \ + long val) \ +{ \ + mutex_lock(&data->update_lock); \ + data->reg[channel] = LM75_TEMP_TO_REG(val); \ + w83627ehf_write_temp(data, data->addr[channel], data->reg[channel]); \ + mutex_unlock(&data->update_lock); \ + return 0; \ +} +store_temp_reg(reg_temp_over, temp_max); +store_temp_reg(reg_temp_hyst, temp_max_hyst); + +static int +store_temp_offset(struct device *dev, struct w83627ehf_data *data, int channel, + long val) +{ + val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127); + + mutex_lock(&data->update_lock); + data->temp_offset[channel] = val; + w83627ehf_write_value(data, W83627EHF_REG_TEMP_OFFSET[channel], val); + mutex_unlock(&data->update_lock); + return 0; +} + +static int +store_pwm_mode(struct device *dev, struct w83627ehf_data *data, int channel, + long val) +{ + u16 reg; + + if (val < 0 || val > 1) + return -EINVAL; + + mutex_lock(&data->update_lock); + reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[channel]); + data->pwm_mode[channel] = val; + reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[channel]); + if (!val) + reg |= 1 << W83627EHF_PWM_MODE_SHIFT[channel]; + w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel], reg); + mutex_unlock(&data->update_lock); + return 0; +} + +static int +store_pwm(struct device *dev, struct w83627ehf_data *data, int channel, + long val) +{ + val = clamp_val(val, 0, 255); + + mutex_lock(&data->update_lock); + data->pwm[channel] = val; + w83627ehf_write_value(data, W83627EHF_REG_PWM[channel], val); + mutex_unlock(&data->update_lock); + return 0; +} + +static int +store_pwm_enable(struct device *dev, struct w83627ehf_data *data, int channel, + long val) +{ + u16 reg; + + if (!val || val < 0 || + (val > 4 && val != data->pwm_enable_orig[channel])) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->pwm_enable[channel] = val; + reg = w83627ehf_read_value(data, + W83627EHF_REG_PWM_ENABLE[channel]); + reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[channel]); + reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[channel]; + w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel], + reg); + mutex_unlock(&data->update_lock); + return 0; +} + +#define show_tol_temp(reg) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \ + struct sensor_device_attribute *sensor_attr = \ + to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", data->reg[nr] * 1000); \ +} + +show_tol_temp(tolerance) +show_tol_temp(target_temp) + +static ssize_t +store_target_temp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct w83627ehf_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err < 0) + return err; + + val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 127); + + mutex_lock(&data->update_lock); + data->target_temp[nr] = val; + w83627ehf_write_value(data, W83627EHF_REG_TARGET[nr], val); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +store_tolerance(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct w83627ehf_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u16 reg; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err < 0) + return err; + + /* Limit the temp to 0C - 15C */ + val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 15); + + mutex_lock(&data->update_lock); + reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]); + if (nr == 1) + reg = (reg & 0x0f) | (val << 4); + else + reg = (reg & 0xf0) | val; + w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg); + data->tolerance[nr] = val; + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR(pwm1_target, 0644, show_target_temp, + store_target_temp, 0); +static SENSOR_DEVICE_ATTR(pwm2_target, 0644, show_target_temp, + store_target_temp, 1); +static SENSOR_DEVICE_ATTR(pwm3_target, 0644, show_target_temp, + store_target_temp, 2); +static SENSOR_DEVICE_ATTR(pwm4_target, 0644, show_target_temp, + store_target_temp, 3); + +static SENSOR_DEVICE_ATTR(pwm1_tolerance, 0644, show_tolerance, + store_tolerance, 0); +static SENSOR_DEVICE_ATTR(pwm2_tolerance, 0644, show_tolerance, + store_tolerance, 1); +static SENSOR_DEVICE_ATTR(pwm3_tolerance, 0644, show_tolerance, + store_tolerance, 2); +static SENSOR_DEVICE_ATTR(pwm4_tolerance, 0644, show_tolerance, + store_tolerance, 3); + +/* Smart Fan registers */ + +#define fan_functions(reg, REG) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \ + struct sensor_device_attribute *sensor_attr = \ + to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", data->reg[nr]); \ +} \ +static ssize_t \ +store_##reg(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct w83627ehf_data *data = dev_get_drvdata(dev); \ + struct sensor_device_attribute *sensor_attr = \ + to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + unsigned long val; \ + int err; \ + err = kstrtoul(buf, 10, &val); \ + if (err < 0) \ + return err; \ + val = clamp_val(val, 1, 255); \ + mutex_lock(&data->update_lock); \ + data->reg[nr] = val; \ + w83627ehf_write_value(data, REG[nr], val); \ + mutex_unlock(&data->update_lock); \ + return count; \ +} + +fan_functions(fan_start_output, W83627EHF_REG_FAN_START_OUTPUT) +fan_functions(fan_stop_output, W83627EHF_REG_FAN_STOP_OUTPUT) +fan_functions(fan_max_output, data->REG_FAN_MAX_OUTPUT) +fan_functions(fan_step_output, data->REG_FAN_STEP_OUTPUT) + +#define fan_time_functions(reg, REG) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \ + struct sensor_device_attribute *sensor_attr = \ + to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", \ + step_time_from_reg(data->reg[nr], \ + data->pwm_mode[nr])); \ +} \ +\ +static ssize_t \ +store_##reg(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct w83627ehf_data *data = dev_get_drvdata(dev); \ + struct sensor_device_attribute *sensor_attr = \ + to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + unsigned long val; \ + int err; \ + err = kstrtoul(buf, 10, &val); \ + if (err < 0) \ + return err; \ + val = step_time_to_reg(val, data->pwm_mode[nr]); \ + mutex_lock(&data->update_lock); \ + data->reg[nr] = val; \ + w83627ehf_write_value(data, REG[nr], val); \ + mutex_unlock(&data->update_lock); \ + return count; \ +} \ + +fan_time_functions(fan_stop_time, W83627EHF_REG_FAN_STOP_TIME) + +static SENSOR_DEVICE_ATTR(pwm4_stop_time, 0644, show_fan_stop_time, + store_fan_stop_time, 3); +static SENSOR_DEVICE_ATTR(pwm4_start_output, 0644, show_fan_start_output, + store_fan_start_output, 3); +static SENSOR_DEVICE_ATTR(pwm4_stop_output, 0644, show_fan_stop_output, + store_fan_stop_output, 3); +static SENSOR_DEVICE_ATTR(pwm4_max_output, 0644, show_fan_max_output, + store_fan_max_output, 3); +static SENSOR_DEVICE_ATTR(pwm4_step_output, 0644, show_fan_step_output, + store_fan_step_output, 3); + +static SENSOR_DEVICE_ATTR(pwm3_stop_time, 0644, show_fan_stop_time, + store_fan_stop_time, 2); +static SENSOR_DEVICE_ATTR(pwm3_start_output, 0644, show_fan_start_output, + store_fan_start_output, 2); +static SENSOR_DEVICE_ATTR(pwm3_stop_output, 0644, show_fan_stop_output, + store_fan_stop_output, 2); + +static SENSOR_DEVICE_ATTR(pwm1_stop_time, 0644, show_fan_stop_time, + store_fan_stop_time, 0); +static SENSOR_DEVICE_ATTR(pwm2_stop_time, 0644, show_fan_stop_time, + store_fan_stop_time, 1); +static SENSOR_DEVICE_ATTR(pwm1_start_output, 0644, show_fan_start_output, + store_fan_start_output, 0); +static SENSOR_DEVICE_ATTR(pwm2_start_output, 0644, show_fan_start_output, + store_fan_start_output, 1); +static SENSOR_DEVICE_ATTR(pwm1_stop_output, 0644, show_fan_stop_output, + store_fan_stop_output, 0); +static SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644, show_fan_stop_output, + store_fan_stop_output, 1); + + +/* + * pwm1 and pwm3 don't support max and step settings on all chips. + * Need to check support while generating/removing attribute files. + */ +static SENSOR_DEVICE_ATTR(pwm1_max_output, 0644, show_fan_max_output, + store_fan_max_output, 0); +static SENSOR_DEVICE_ATTR(pwm1_step_output, 0644, show_fan_step_output, + store_fan_step_output, 0); +static SENSOR_DEVICE_ATTR(pwm2_max_output, 0644, show_fan_max_output, + store_fan_max_output, 1); +static SENSOR_DEVICE_ATTR(pwm2_step_output, 0644, show_fan_step_output, + store_fan_step_output, 1); +static SENSOR_DEVICE_ATTR(pwm3_max_output, 0644, show_fan_max_output, + store_fan_max_output, 2); +static SENSOR_DEVICE_ATTR(pwm3_step_output, 0644, show_fan_step_output, + store_fan_step_output, 2); + +static ssize_t +cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83627ehf_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR_RO(cpu0_vid); + + +/* Case open detection */ +static int +clear_caseopen(struct device *dev, struct w83627ehf_data *data, int channel, + long val) +{ + const u16 mask = 0x80; + u16 reg; + + if (val != 0 || channel != 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR); + w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg | mask); + w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg & ~mask); + data->valid = false; /* Force cache refresh */ + mutex_unlock(&data->update_lock); + + return 0; +} + +static umode_t w83627ehf_attrs_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct w83627ehf_data *data = dev_get_drvdata(dev); + struct device_attribute *devattr; + struct sensor_device_attribute *sda; + + devattr = container_of(a, struct device_attribute, attr); + + /* Not sensor */ + if (devattr->show == cpu0_vid_show && data->have_vid) + return a->mode; + + sda = (struct sensor_device_attribute *)devattr; + + if (sda->index < 2 && + (devattr->show == show_fan_stop_time || + devattr->show == show_fan_start_output || + devattr->show == show_fan_stop_output)) + return a->mode; + + if (sda->index < 3 && + (devattr->show == show_fan_max_output || + devattr->show == show_fan_step_output) && + data->REG_FAN_STEP_OUTPUT && + data->REG_FAN_STEP_OUTPUT[sda->index] != 0xff) + return a->mode; + + /* if fan3 and fan4 are enabled create the files for them */ + if (sda->index == 2 && + (data->has_fan & (1 << 2)) && data->pwm_num >= 3 && + (devattr->show == show_fan_stop_time || + devattr->show == show_fan_start_output || + devattr->show == show_fan_stop_output)) + return a->mode; + + if (sda->index == 3 && + (data->has_fan & (1 << 3)) && data->pwm_num >= 4 && + (devattr->show == show_fan_stop_time || + devattr->show == show_fan_start_output || + devattr->show == show_fan_stop_output || + devattr->show == show_fan_max_output || + devattr->show == show_fan_step_output)) + return a->mode; + + if ((devattr->show == show_target_temp || + devattr->show == show_tolerance) && + (data->has_fan & (1 << sda->index)) && + sda->index < data->pwm_num) + return a->mode; + + return 0; +} + +/* These groups handle non-standard attributes used in this device */ +static struct attribute *w83627ehf_attrs[] = { + + &sensor_dev_attr_pwm1_stop_time.dev_attr.attr, + &sensor_dev_attr_pwm1_start_output.dev_attr.attr, + &sensor_dev_attr_pwm1_stop_output.dev_attr.attr, + &sensor_dev_attr_pwm1_max_output.dev_attr.attr, + &sensor_dev_attr_pwm1_step_output.dev_attr.attr, + &sensor_dev_attr_pwm1_target.dev_attr.attr, + &sensor_dev_attr_pwm1_tolerance.dev_attr.attr, + + &sensor_dev_attr_pwm2_stop_time.dev_attr.attr, + &sensor_dev_attr_pwm2_start_output.dev_attr.attr, + &sensor_dev_attr_pwm2_stop_output.dev_attr.attr, + &sensor_dev_attr_pwm2_max_output.dev_attr.attr, + &sensor_dev_attr_pwm2_step_output.dev_attr.attr, + &sensor_dev_attr_pwm2_target.dev_attr.attr, + &sensor_dev_attr_pwm2_tolerance.dev_attr.attr, + + &sensor_dev_attr_pwm3_stop_time.dev_attr.attr, + &sensor_dev_attr_pwm3_start_output.dev_attr.attr, + &sensor_dev_attr_pwm3_stop_output.dev_attr.attr, + &sensor_dev_attr_pwm3_max_output.dev_attr.attr, + &sensor_dev_attr_pwm3_step_output.dev_attr.attr, + &sensor_dev_attr_pwm3_target.dev_attr.attr, + &sensor_dev_attr_pwm3_tolerance.dev_attr.attr, + + &sensor_dev_attr_pwm4_stop_time.dev_attr.attr, + &sensor_dev_attr_pwm4_start_output.dev_attr.attr, + &sensor_dev_attr_pwm4_stop_output.dev_attr.attr, + &sensor_dev_attr_pwm4_max_output.dev_attr.attr, + &sensor_dev_attr_pwm4_step_output.dev_attr.attr, + &sensor_dev_attr_pwm4_target.dev_attr.attr, + &sensor_dev_attr_pwm4_tolerance.dev_attr.attr, + + &dev_attr_cpu0_vid.attr, + NULL +}; + +static const struct attribute_group w83627ehf_group = { + .attrs = w83627ehf_attrs, + .is_visible = w83627ehf_attrs_visible, +}; + +static const struct attribute_group *w83627ehf_groups[] = { + &w83627ehf_group, + NULL +}; + +/* + * Driver and device management + */ + +/* Get the monitoring functions started */ +static inline void w83627ehf_init_device(struct w83627ehf_data *data, + enum kinds kind) +{ + int i; + u8 tmp, diode; + + /* Start monitoring is needed */ + tmp = w83627ehf_read_value(data, W83627EHF_REG_CONFIG); + if (!(tmp & 0x01)) + w83627ehf_write_value(data, W83627EHF_REG_CONFIG, + tmp | 0x01); + + /* Enable temperature sensors if needed */ + for (i = 0; i < NUM_REG_TEMP; i++) { + if (!(data->have_temp & (1 << i))) + continue; + if (!data->reg_temp_config[i]) + continue; + tmp = w83627ehf_read_value(data, + data->reg_temp_config[i]); + if (tmp & 0x01) + w83627ehf_write_value(data, + data->reg_temp_config[i], + tmp & 0xfe); + } + + /* Enable VBAT monitoring if needed */ + tmp = w83627ehf_read_value(data, W83627EHF_REG_VBAT); + if (!(tmp & 0x01)) + w83627ehf_write_value(data, W83627EHF_REG_VBAT, tmp | 0x01); + + /* Get thermal sensor types */ + switch (kind) { + case w83627ehf: + diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE); + break; + case w83627uhg: + diode = 0x00; + break; + default: + diode = 0x70; + } + for (i = 0; i < 3; i++) { + const char *label = NULL; + + if (data->temp_label) + label = data->temp_label[data->temp_src[i]]; + + /* Digital source overrides analog type */ + if (label && strncmp(label, "PECI", 4) == 0) + data->temp_type[i] = 6; + else if (label && strncmp(label, "AMD", 3) == 0) + data->temp_type[i] = 5; + else if ((tmp & (0x02 << i))) + data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3; + else + data->temp_type[i] = 4; /* thermistor */ + } +} + +static void +w83627ehf_set_temp_reg_ehf(struct w83627ehf_data *data, int n_temp) +{ + int i; + + for (i = 0; i < n_temp; i++) { + data->reg_temp[i] = W83627EHF_REG_TEMP[i]; + data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i]; + data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i]; + data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i]; + } +} + +static void +w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data, + struct w83627ehf_data *data) +{ + int fan3pin, fan4pin, fan5pin, regval; + + /* The W83627UHG is simple, only two fan inputs, no config */ + if (sio_data->kind == w83627uhg) { + data->has_fan = 0x03; /* fan1 and fan2 */ + data->has_fan_min = 0x03; + return; + } + + /* fan4 and fan5 share some pins with the GPIO and serial flash */ + if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) { + fan3pin = 1; + fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40; + fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20; + } else { + fan3pin = 1; + fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06); + fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02); + } + + data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */ + data->has_fan |= (fan3pin << 2); + data->has_fan_min |= (fan3pin << 2); + + /* + * It looks like fan4 and fan5 pins can be alternatively used + * as fan on/off switches, but fan5 control is write only :/ + * We assume that if the serial interface is disabled, designers + * connected fan5 as input unless they are emitting log 1, which + * is not the default. + */ + regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1); + if ((regval & (1 << 2)) && fan4pin) { + data->has_fan |= (1 << 3); + data->has_fan_min |= (1 << 3); + } + if (!(regval & (1 << 1)) && fan5pin) { + data->has_fan |= (1 << 4); + data->has_fan_min |= (1 << 4); + } +} + +static umode_t +w83627ehf_is_visible(const void *drvdata, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct w83627ehf_data *data = drvdata; + + switch (type) { + case hwmon_temp: + /* channel 0.., name 1.. */ + if (!(data->have_temp & (1 << channel))) + return 0; + if (attr == hwmon_temp_input) + return 0444; + if (attr == hwmon_temp_label) { + if (data->temp_label) + return 0444; + return 0; + } + if (channel == 2 && data->temp3_val_only) + return 0; + if (attr == hwmon_temp_max) { + if (data->reg_temp_over[channel]) + return 0644; + else + return 0; + } + if (attr == hwmon_temp_max_hyst) { + if (data->reg_temp_hyst[channel]) + return 0644; + else + return 0; + } + if (channel > 2) + return 0; + if (attr == hwmon_temp_alarm || attr == hwmon_temp_type) + return 0444; + if (attr == hwmon_temp_offset) { + if (data->have_temp_offset & (1 << channel)) + return 0644; + else + return 0; + } + break; + + case hwmon_fan: + /* channel 0.., name 1.. */ + if (!(data->has_fan & (1 << channel))) + return 0; + if (attr == hwmon_fan_input || attr == hwmon_fan_alarm) + return 0444; + if (attr == hwmon_fan_div) { + return 0444; + } + if (attr == hwmon_fan_min) { + if (data->has_fan_min & (1 << channel)) + return 0644; + else + return 0; + } + break; + + case hwmon_in: + /* channel 0.., name 0.. */ + if (channel >= data->in_num) + return 0; + if (channel == 6 && data->in6_skip) + return 0; + if (attr == hwmon_in_alarm || attr == hwmon_in_input) + return 0444; + if (attr == hwmon_in_min || attr == hwmon_in_max) + return 0644; + break; + + case hwmon_pwm: + /* channel 0.., name 1.. */ + if (!(data->has_fan & (1 << channel)) || + channel >= data->pwm_num) + return 0; + if (attr == hwmon_pwm_mode || attr == hwmon_pwm_enable || + attr == hwmon_pwm_input) + return 0644; + break; + + case hwmon_intrusion: + return 0644; + + default: /* Shouldn't happen */ + return 0; + } + + return 0; /* Shouldn't happen */ +} + +static int +w83627ehf_do_read_temp(struct w83627ehf_data *data, u32 attr, + int channel, long *val) +{ + switch (attr) { + case hwmon_temp_input: + *val = LM75_TEMP_FROM_REG(data->temp[channel]); + return 0; + case hwmon_temp_max: + *val = LM75_TEMP_FROM_REG(data->temp_max[channel]); + return 0; + case hwmon_temp_max_hyst: + *val = LM75_TEMP_FROM_REG(data->temp_max_hyst[channel]); + return 0; + case hwmon_temp_offset: + *val = data->temp_offset[channel] * 1000; + return 0; + case hwmon_temp_type: + *val = (int)data->temp_type[channel]; + return 0; + case hwmon_temp_alarm: + if (channel < 3) { + int bit[] = { 4, 5, 13 }; + *val = (data->alarms >> bit[channel]) & 1; + return 0; + } + break; + + default: + break; + } + + return -EOPNOTSUPP; +} + +static int +w83627ehf_do_read_in(struct w83627ehf_data *data, u32 attr, + int channel, long *val) +{ + switch (attr) { + case hwmon_in_input: + *val = in_from_reg(data->in[channel], channel, data->scale_in); + return 0; + case hwmon_in_min: + *val = in_from_reg(data->in_min[channel], channel, + data->scale_in); + return 0; + case hwmon_in_max: + *val = in_from_reg(data->in_max[channel], channel, + data->scale_in); + return 0; + case hwmon_in_alarm: + if (channel < 10) { + int bit[] = { 0, 1, 2, 3, 8, 21, 20, 16, 17, 19 }; + *val = (data->alarms >> bit[channel]) & 1; + return 0; + } + break; + default: + break; + } + return -EOPNOTSUPP; +} + +static int +w83627ehf_do_read_fan(struct w83627ehf_data *data, u32 attr, + int channel, long *val) +{ + switch (attr) { + case hwmon_fan_input: + *val = data->rpm[channel]; + return 0; + case hwmon_fan_min: + *val = fan_from_reg8(data->fan_min[channel], + data->fan_div[channel]); + return 0; + case hwmon_fan_div: + *val = div_from_reg(data->fan_div[channel]); + return 0; + case hwmon_fan_alarm: + if (channel < 5) { + int bit[] = { 6, 7, 11, 10, 23 }; + *val = (data->alarms >> bit[channel]) & 1; + return 0; + } + break; + default: + break; + } + return -EOPNOTSUPP; +} + +static int +w83627ehf_do_read_pwm(struct w83627ehf_data *data, u32 attr, + int channel, long *val) +{ + switch (attr) { + case hwmon_pwm_input: + *val = data->pwm[channel]; + return 0; + case hwmon_pwm_enable: + *val = data->pwm_enable[channel]; + return 0; + case hwmon_pwm_mode: + *val = data->pwm_enable[channel]; + return 0; + default: + break; + } + return -EOPNOTSUPP; +} + +static int +w83627ehf_do_read_intrusion(struct w83627ehf_data *data, u32 attr, + int channel, long *val) +{ + if (attr != hwmon_intrusion_alarm || channel != 0) + return -EOPNOTSUPP; /* shouldn't happen */ + + *val = !!(data->caseopen & 0x10); + return 0; +} + +static int +w83627ehf_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); + + switch (type) { + case hwmon_fan: + return w83627ehf_do_read_fan(data, attr, channel, val); + + case hwmon_in: + return w83627ehf_do_read_in(data, attr, channel, val); + + case hwmon_pwm: + return w83627ehf_do_read_pwm(data, attr, channel, val); + + case hwmon_temp: + return w83627ehf_do_read_temp(data, attr, channel, val); + + case hwmon_intrusion: + return w83627ehf_do_read_intrusion(data, attr, channel, val); + + default: + break; + } + + return -EOPNOTSUPP; +} + +static int +w83627ehf_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + struct w83627ehf_data *data = dev_get_drvdata(dev); + + switch (type) { + case hwmon_temp: + if (attr == hwmon_temp_label) { + *str = data->temp_label[data->temp_src[channel]]; + return 0; + } + break; + + default: + break; + } + /* Nothing else should be read as a string */ + return -EOPNOTSUPP; +} + +static int +w83627ehf_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct w83627ehf_data *data = dev_get_drvdata(dev); + + if (type == hwmon_in && attr == hwmon_in_min) + return store_in_min(dev, data, channel, val); + if (type == hwmon_in && attr == hwmon_in_max) + return store_in_max(dev, data, channel, val); + + if (type == hwmon_fan && attr == hwmon_fan_min) + return store_fan_min(dev, data, channel, val); + + if (type == hwmon_temp && attr == hwmon_temp_max) + return store_temp_max(dev, data, channel, val); + if (type == hwmon_temp && attr == hwmon_temp_max_hyst) + return store_temp_max_hyst(dev, data, channel, val); + if (type == hwmon_temp && attr == hwmon_temp_offset) + return store_temp_offset(dev, data, channel, val); + + if (type == hwmon_pwm && attr == hwmon_pwm_mode) + return store_pwm_mode(dev, data, channel, val); + if (type == hwmon_pwm && attr == hwmon_pwm_enable) + return store_pwm_enable(dev, data, channel, val); + if (type == hwmon_pwm && attr == hwmon_pwm_input) + return store_pwm(dev, data, channel, val); + + if (type == hwmon_intrusion && attr == hwmon_intrusion_alarm) + return clear_caseopen(dev, data, channel, val); + + return -EOPNOTSUPP; +} + +static const struct hwmon_ops w83627ehf_ops = { + .is_visible = w83627ehf_is_visible, + .read = w83627ehf_read, + .read_string = w83627ehf_read_string, + .write = w83627ehf_write, +}; + +static const struct hwmon_channel_info *w83627ehf_info[] = { + HWMON_CHANNEL_INFO(fan, + HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN, + HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN, + HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN, + HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN, + HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN), + HWMON_CHANNEL_INFO(in, + HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, + HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, + HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, + HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, + HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, + HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, + HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, + HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, + HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, + HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE, + HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE, + HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE, + HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE), + HWMON_CHANNEL_INFO(temp, + HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | + HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, + HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | + HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, + HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | + HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, + HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | + HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, + HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | + HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, + HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | + HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, + HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | + HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, + HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | + HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, + HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | + HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE), + HWMON_CHANNEL_INFO(intrusion, + HWMON_INTRUSION_ALARM), + NULL +}; + +static const struct hwmon_chip_info w83627ehf_chip_info = { + .ops = &w83627ehf_ops, + .info = w83627ehf_info, +}; + +static int __init w83627ehf_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev); + struct w83627ehf_data *data; + struct resource *res; + u8 en_vrm10; + int i, err = 0; + struct device *hwmon_dev; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!devm_request_region(dev, res->start, IOREGION_LENGTH, DRVNAME)) + return -EBUSY; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->addr = res->start; + mutex_init(&data->lock); + mutex_init(&data->update_lock); + data->name = w83627ehf_device_names[sio_data->kind]; + data->bank = 0xff; /* Force initial bank selection */ + platform_set_drvdata(pdev, data); + + /* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */ + data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9; + /* 667HG has 3 pwms, and 627UHG has only 2 */ + switch (sio_data->kind) { + default: + data->pwm_num = 4; + break; + case w83667hg: + case w83667hg_b: + data->pwm_num = 3; + break; + case w83627uhg: + data->pwm_num = 2; + break; + } + + /* Default to 3 temperature inputs, code below will adjust as needed */ + data->have_temp = 0x07; + + /* Deal with temperature register setup first. */ + if (sio_data->kind == w83667hg_b) { + u8 reg; + + w83627ehf_set_temp_reg_ehf(data, 4); + + /* + * Temperature sources are selected with bank 0, registers 0x49 + * and 0x4a. + */ + reg = w83627ehf_read_value(data, 0x4a); + data->temp_src[0] = reg >> 5; + reg = w83627ehf_read_value(data, 0x49); + data->temp_src[1] = reg & 0x07; + data->temp_src[2] = (reg >> 4) & 0x07; + + /* + * W83667HG-B has another temperature register at 0x7e. + * The temperature source is selected with register 0x7d. + * Support it if the source differs from already reported + * sources. + */ + reg = w83627ehf_read_value(data, 0x7d); + reg &= 0x07; + if (reg != data->temp_src[0] && reg != data->temp_src[1] + && reg != data->temp_src[2]) { + data->temp_src[3] = reg; + data->have_temp |= 1 << 3; + } + + /* + * Chip supports either AUXTIN or VIN3. Try to find out which + * one. + */ + reg = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[2]); + if (data->temp_src[2] == 2 && (reg & 0x01)) + data->have_temp &= ~(1 << 2); + + if ((data->temp_src[2] == 2 && (data->have_temp & (1 << 2))) + || (data->temp_src[3] == 2 && (data->have_temp & (1 << 3)))) + data->in6_skip = 1; + + data->temp_label = w83667hg_b_temp_label; + data->have_temp_offset = data->have_temp & 0x07; + for (i = 0; i < 3; i++) { + if (data->temp_src[i] > 2) + data->have_temp_offset &= ~(1 << i); + } + } else if (sio_data->kind == w83627uhg) { + u8 reg; + + w83627ehf_set_temp_reg_ehf(data, 3); + + /* + * Temperature sources for temp2 and temp3 are selected with + * bank 0, registers 0x49 and 0x4a. + */ + data->temp_src[0] = 0; /* SYSTIN */ + reg = w83627ehf_read_value(data, 0x49) & 0x07; + /* Adjust to have the same mapping as other source registers */ + if (reg == 0) + data->temp_src[1] = 1; + else if (reg >= 2 && reg <= 5) + data->temp_src[1] = reg + 2; + else /* should never happen */ + data->have_temp &= ~(1 << 1); + reg = w83627ehf_read_value(data, 0x4a); + data->temp_src[2] = reg >> 5; + + /* + * Skip temp3 if source is invalid or the same as temp1 + * or temp2. + */ + if (data->temp_src[2] == 2 || data->temp_src[2] == 3 || + data->temp_src[2] == data->temp_src[0] || + ((data->have_temp & (1 << 1)) && + data->temp_src[2] == data->temp_src[1])) + data->have_temp &= ~(1 << 2); + else + data->temp3_val_only = 1; /* No limit regs */ + + data->in6_skip = 1; /* No VIN3 */ + + data->temp_label = w83667hg_b_temp_label; + data->have_temp_offset = data->have_temp & 0x03; + for (i = 0; i < 3; i++) { + if (data->temp_src[i] > 1) + data->have_temp_offset &= ~(1 << i); + } + } else { + w83627ehf_set_temp_reg_ehf(data, 3); + + /* Temperature sources are fixed */ + + if (sio_data->kind == w83667hg) { + u8 reg; + + /* + * Chip supports either AUXTIN or VIN3. Try to find + * out which one. + */ + reg = w83627ehf_read_value(data, + W83627EHF_REG_TEMP_CONFIG[2]); + if (reg & 0x01) + data->have_temp &= ~(1 << 2); + else + data->in6_skip = 1; + } + data->have_temp_offset = data->have_temp & 0x07; + } + + if (sio_data->kind == w83667hg_b) { + data->REG_FAN_MAX_OUTPUT = + W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B; + data->REG_FAN_STEP_OUTPUT = + W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B; + } else { + data->REG_FAN_MAX_OUTPUT = + W83627EHF_REG_FAN_MAX_OUTPUT_COMMON; + data->REG_FAN_STEP_OUTPUT = + W83627EHF_REG_FAN_STEP_OUTPUT_COMMON; + } + + /* Setup input voltage scaling factors */ + if (sio_data->kind == w83627uhg) + data->scale_in = scale_in_w83627uhg; + else + data->scale_in = scale_in_common; + + /* Initialize the chip */ + w83627ehf_init_device(data, sio_data->kind); + + data->vrm = vid_which_vrm(); + + err = superio_enter(sio_data->sioreg); + if (err) + return err; + + /* Read VID value */ + if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) { + /* + * W83667HG has different pins for VID input and output, so + * we can get the VID input values directly at logical device D + * 0xe3. + */ + superio_select(sio_data->sioreg, W83667HG_LD_VID); + data->vid = superio_inb(sio_data->sioreg, 0xe3); + data->have_vid = true; + } else if (sio_data->kind != w83627uhg) { + superio_select(sio_data->sioreg, W83627EHF_LD_HWM); + if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) { + /* + * Set VID input sensibility if needed. In theory the + * BIOS should have set it, but in practice it's not + * always the case. We only do it for the W83627EHF/EHG + * because the W83627DHG is more complex in this + * respect. + */ + if (sio_data->kind == w83627ehf) { + en_vrm10 = superio_inb(sio_data->sioreg, + SIO_REG_EN_VRM10); + if ((en_vrm10 & 0x08) && data->vrm == 90) { + dev_warn(dev, + "Setting VID input voltage to TTL\n"); + superio_outb(sio_data->sioreg, + SIO_REG_EN_VRM10, + en_vrm10 & ~0x08); + } else if (!(en_vrm10 & 0x08) + && data->vrm == 100) { + dev_warn(dev, + "Setting VID input voltage to VRM10\n"); + superio_outb(sio_data->sioreg, + SIO_REG_EN_VRM10, + en_vrm10 | 0x08); + } + } + + data->vid = superio_inb(sio_data->sioreg, + SIO_REG_VID_DATA); + if (sio_data->kind == w83627ehf) /* 6 VID pins only */ + data->vid &= 0x3f; + data->have_vid = true; + } else { + dev_info(dev, + "VID pins in output mode, CPU VID not available\n"); + } + } + + w83627ehf_check_fan_inputs(sio_data, data); + + superio_exit(sio_data->sioreg); + + /* Read fan clock dividers immediately */ + w83627ehf_update_fan_div(data); + + /* Read pwm data to save original values */ + w83627ehf_update_pwm(data); + for (i = 0; i < data->pwm_num; i++) + data->pwm_enable_orig[i] = data->pwm_enable[i]; + + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, + data->name, + data, + &w83627ehf_chip_info, + w83627ehf_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static int w83627ehf_suspend(struct device *dev) +{ + struct w83627ehf_data *data = w83627ehf_update_device(dev); + + mutex_lock(&data->update_lock); + data->vbat = w83627ehf_read_value(data, W83627EHF_REG_VBAT); + mutex_unlock(&data->update_lock); + + return 0; +} + +static int w83627ehf_resume(struct device *dev) +{ + struct w83627ehf_data *data = dev_get_drvdata(dev); + int i; + + mutex_lock(&data->update_lock); + data->bank = 0xff; /* Force initial bank selection */ + + /* Restore limits */ + for (i = 0; i < data->in_num; i++) { + if ((i == 6) && data->in6_skip) + continue; + + w83627ehf_write_value(data, W83627EHF_REG_IN_MIN(i), + data->in_min[i]); + w83627ehf_write_value(data, W83627EHF_REG_IN_MAX(i), + data->in_max[i]); + } + + for (i = 0; i < 5; i++) { + if (!(data->has_fan_min & (1 << i))) + continue; + + w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[i], + data->fan_min[i]); + } + + for (i = 0; i < NUM_REG_TEMP; i++) { + if (!(data->have_temp & (1 << i))) + continue; + + if (data->reg_temp_over[i]) + w83627ehf_write_temp(data, data->reg_temp_over[i], + data->temp_max[i]); + if (data->reg_temp_hyst[i]) + w83627ehf_write_temp(data, data->reg_temp_hyst[i], + data->temp_max_hyst[i]); + if (i > 2) + continue; + if (data->have_temp_offset & (1 << i)) + w83627ehf_write_value(data, + W83627EHF_REG_TEMP_OFFSET[i], + data->temp_offset[i]); + } + + /* Restore other settings */ + w83627ehf_write_value(data, W83627EHF_REG_VBAT, data->vbat); + + /* Force re-reading all values */ + data->valid = false; + mutex_unlock(&data->update_lock); + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(w83627ehf_dev_pm_ops, w83627ehf_suspend, w83627ehf_resume); + +static struct platform_driver w83627ehf_driver = { + .driver = { + .name = DRVNAME, + .pm = pm_sleep_ptr(&w83627ehf_dev_pm_ops), + }, +}; + +/* w83627ehf_find() looks for a '627 in the Super-I/O config space */ +static int __init w83627ehf_find(int sioaddr, unsigned short *addr, + struct w83627ehf_sio_data *sio_data) +{ + static const char sio_name_W83627EHF[] __initconst = "W83627EHF"; + static const char sio_name_W83627EHG[] __initconst = "W83627EHG"; + static const char sio_name_W83627DHG[] __initconst = "W83627DHG"; + static const char sio_name_W83627DHG_P[] __initconst = "W83627DHG-P"; + static const char sio_name_W83627UHG[] __initconst = "W83627UHG"; + static const char sio_name_W83667HG[] __initconst = "W83667HG"; + static const char sio_name_W83667HG_B[] __initconst = "W83667HG-B"; + + u16 val; + const char *sio_name; + int err; + + err = superio_enter(sioaddr); + if (err) + return err; + + if (force_id) + val = force_id; + else + val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8) + | superio_inb(sioaddr, SIO_REG_DEVID + 1); + switch (val & SIO_ID_MASK) { + case SIO_W83627EHF_ID: + sio_data->kind = w83627ehf; + sio_name = sio_name_W83627EHF; + break; + case SIO_W83627EHG_ID: + sio_data->kind = w83627ehf; + sio_name = sio_name_W83627EHG; + break; + case SIO_W83627DHG_ID: + sio_data->kind = w83627dhg; + sio_name = sio_name_W83627DHG; + break; + case SIO_W83627DHG_P_ID: + sio_data->kind = w83627dhg_p; + sio_name = sio_name_W83627DHG_P; + break; + case SIO_W83627UHG_ID: + sio_data->kind = w83627uhg; + sio_name = sio_name_W83627UHG; + break; + case SIO_W83667HG_ID: + sio_data->kind = w83667hg; + sio_name = sio_name_W83667HG; + break; + case SIO_W83667HG_B_ID: + sio_data->kind = w83667hg_b; + sio_name = sio_name_W83667HG_B; + break; + default: + if (val != 0xffff) + pr_debug("unsupported chip ID: 0x%04x\n", val); + superio_exit(sioaddr); + return -ENODEV; + } + + /* We have a known chip, find the HWM I/O address */ + superio_select(sioaddr, W83627EHF_LD_HWM); + val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8) + | superio_inb(sioaddr, SIO_REG_ADDR + 1); + *addr = val & IOREGION_ALIGNMENT; + if (*addr == 0) { + pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); + superio_exit(sioaddr); + return -ENODEV; + } + + /* Activate logical device if needed */ + val = superio_inb(sioaddr, SIO_REG_ENABLE); + if (!(val & 0x01)) { + pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); + superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01); + } + + superio_exit(sioaddr); + pr_info("Found %s chip at %#x\n", sio_name, *addr); + sio_data->sioreg = sioaddr; + + return 0; +} + +/* + * when Super-I/O functions move to a separate file, the Super-I/O + * bus will manage the lifetime of the device and this module will only keep + * track of the w83627ehf driver. + */ +static struct platform_device *pdev; + +static int __init sensors_w83627ehf_init(void) +{ + int err; + unsigned short address; + struct resource res = { + .name = DRVNAME, + .flags = IORESOURCE_IO, + }; + struct w83627ehf_sio_data sio_data; + + /* + * initialize sio_data->kind and sio_data->sioreg. + * + * when Super-I/O functions move to a separate file, the Super-I/O + * driver will probe 0x2e and 0x4e and auto-detect the presence of a + * w83627ehf hardware monitor, and call probe() + */ + if (w83627ehf_find(0x2e, &address, &sio_data) && + w83627ehf_find(0x4e, &address, &sio_data)) + return -ENODEV; + + res.start = address + IOREGION_OFFSET; + res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; + + err = acpi_check_resource_conflict(&res); + if (err) + return err; + + pdev = platform_create_bundle(&w83627ehf_driver, w83627ehf_probe, &res, 1, &sio_data, + sizeof(struct w83627ehf_sio_data)); + + return PTR_ERR_OR_ZERO(pdev); +} + +static void __exit sensors_w83627ehf_exit(void) +{ + platform_device_unregister(pdev); + platform_driver_unregister(&w83627ehf_driver); +} + +MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); +MODULE_DESCRIPTION("W83627EHF driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_w83627ehf_init); +module_exit(sensors_w83627ehf_exit); |