summaryrefslogtreecommitdiffstats
path: root/drivers/iio/accel/adis16209.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/accel/adis16209.c')
-rw-r--r--drivers/iio/accel/adis16209.c313
1 files changed, 313 insertions, 0 deletions
diff --git a/drivers/iio/accel/adis16209.c b/drivers/iio/accel/adis16209.c
new file mode 100644
index 000000000..5a9c6e229
--- /dev/null
+++ b/drivers/iio/accel/adis16209.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer
+ *
+ * Copyright 2010 Analog Devices Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/imu/adis.h>
+
+#define ADIS16209_STARTUP_DELAY_MS 220
+#define ADIS16209_FLASH_CNT_REG 0x00
+
+/* Data Output Register Definitions */
+#define ADIS16209_SUPPLY_OUT_REG 0x02
+#define ADIS16209_XACCL_OUT_REG 0x04
+#define ADIS16209_YACCL_OUT_REG 0x06
+/* Output, auxiliary ADC input */
+#define ADIS16209_AUX_ADC_REG 0x08
+/* Output, temperature */
+#define ADIS16209_TEMP_OUT_REG 0x0A
+/* Output, +/- 90 degrees X-axis inclination */
+#define ADIS16209_XINCL_OUT_REG 0x0C
+#define ADIS16209_YINCL_OUT_REG 0x0E
+/* Output, +/-180 vertical rotational position */
+#define ADIS16209_ROT_OUT_REG 0x10
+
+/*
+ * Calibration Register Definitions.
+ * Acceleration, inclination or rotation offset null.
+ */
+#define ADIS16209_XACCL_NULL_REG 0x12
+#define ADIS16209_YACCL_NULL_REG 0x14
+#define ADIS16209_XINCL_NULL_REG 0x16
+#define ADIS16209_YINCL_NULL_REG 0x18
+#define ADIS16209_ROT_NULL_REG 0x1A
+
+/* Alarm Register Definitions */
+#define ADIS16209_ALM_MAG1_REG 0x20
+#define ADIS16209_ALM_MAG2_REG 0x22
+#define ADIS16209_ALM_SMPL1_REG 0x24
+#define ADIS16209_ALM_SMPL2_REG 0x26
+#define ADIS16209_ALM_CTRL_REG 0x28
+
+#define ADIS16209_AUX_DAC_REG 0x30
+#define ADIS16209_GPIO_CTRL_REG 0x32
+#define ADIS16209_SMPL_PRD_REG 0x36
+#define ADIS16209_AVG_CNT_REG 0x38
+#define ADIS16209_SLP_CNT_REG 0x3A
+
+#define ADIS16209_MSC_CTRL_REG 0x34
+#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST BIT(10)
+#define ADIS16209_MSC_CTRL_SELF_TEST_EN BIT(8)
+#define ADIS16209_MSC_CTRL_DATA_RDY_EN BIT(2)
+/* Data-ready polarity: 1 = active high, 0 = active low */
+#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1)
+#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
+
+#define ADIS16209_STAT_REG 0x3C
+#define ADIS16209_STAT_ALARM2 BIT(9)
+#define ADIS16209_STAT_ALARM1 BIT(8)
+#define ADIS16209_STAT_SELFTEST_FAIL_BIT 5
+#define ADIS16209_STAT_SPI_FAIL_BIT 3
+#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2
+/* Power supply above 3.625 V */
+#define ADIS16209_STAT_POWER_HIGH_BIT 1
+/* Power supply below 2.975 V */
+#define ADIS16209_STAT_POWER_LOW_BIT 0
+
+#define ADIS16209_CMD_REG 0x3E
+#define ADIS16209_CMD_SW_RESET BIT(7)
+#define ADIS16209_CMD_CLEAR_STAT BIT(4)
+#define ADIS16209_CMD_FACTORY_CAL BIT(1)
+
+#define ADIS16209_ERROR_ACTIVE BIT(14)
+
+enum adis16209_scan {
+ ADIS16209_SCAN_SUPPLY,
+ ADIS16209_SCAN_ACC_X,
+ ADIS16209_SCAN_ACC_Y,
+ ADIS16209_SCAN_AUX_ADC,
+ ADIS16209_SCAN_TEMP,
+ ADIS16209_SCAN_INCLI_X,
+ ADIS16209_SCAN_INCLI_Y,
+ ADIS16209_SCAN_ROT,
+};
+
+static const u8 adis16209_addresses[8][1] = {
+ [ADIS16209_SCAN_SUPPLY] = { },
+ [ADIS16209_SCAN_AUX_ADC] = { },
+ [ADIS16209_SCAN_ACC_X] = { ADIS16209_XACCL_NULL_REG },
+ [ADIS16209_SCAN_ACC_Y] = { ADIS16209_YACCL_NULL_REG },
+ [ADIS16209_SCAN_INCLI_X] = { ADIS16209_XINCL_NULL_REG },
+ [ADIS16209_SCAN_INCLI_Y] = { ADIS16209_YINCL_NULL_REG },
+ [ADIS16209_SCAN_ROT] = { },
+ [ADIS16209_SCAN_TEMP] = { },
+};
+
+static int adis16209_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ struct adis *st = iio_priv(indio_dev);
+ int m;
+
+ if (mask != IIO_CHAN_INFO_CALIBBIAS)
+ return -EINVAL;
+
+ switch (chan->type) {
+ case IIO_ACCEL:
+ case IIO_INCLI:
+ m = GENMASK(13, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return adis_write_reg_16(st, adis16209_addresses[chan->scan_index][0],
+ val & m);
+}
+
+static int adis16209_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2,
+ long mask)
+{
+ struct adis *st = iio_priv(indio_dev);
+ int ret;
+ int bits;
+ u8 addr;
+ s16 val16;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ return adis_single_conversion(indio_dev, chan,
+ ADIS16209_ERROR_ACTIVE, val);
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ *val = 0;
+ switch (chan->channel) {
+ case 0:
+ *val2 = 305180; /* 0.30518 mV */
+ break;
+ case 1:
+ *val2 = 610500; /* 0.6105 mV */
+ break;
+ default:
+ return -EINVAL;
+ }
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_TEMP:
+ *val = -470;
+ *val2 = 0;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_ACCEL:
+ /*
+ * IIO base unit for sensitivity of accelerometer
+ * is milli g.
+ * 1 LSB represents 0.244 mg.
+ */
+ *val = 0;
+ *val2 = IIO_G_TO_M_S_2(244140);
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_INCLI:
+ case IIO_ROT:
+ /*
+ * IIO base units for rotation are degrees.
+ * 1 LSB represents 0.025 milli degrees.
+ */
+ *val = 0;
+ *val2 = 25000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case IIO_CHAN_INFO_OFFSET:
+ /*
+ * The raw ADC value is 0x4FE when the temperature
+ * is 45 degrees and the scale factor per milli
+ * degree celcius is -470.
+ */
+ *val = 25000 / -470 - 0x4FE;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ switch (chan->type) {
+ case IIO_ACCEL:
+ bits = 14;
+ break;
+ default:
+ return -EINVAL;
+ }
+ addr = adis16209_addresses[chan->scan_index][0];
+ ret = adis_read_reg_16(st, addr, &val16);
+ if (ret)
+ return ret;
+
+ *val = sign_extend32(val16, bits - 1);
+ return IIO_VAL_INT;
+ }
+ return -EINVAL;
+}
+
+static const struct iio_chan_spec adis16209_channels[] = {
+ ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT_REG, ADIS16209_SCAN_SUPPLY,
+ 0, 14),
+ ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT_REG, ADIS16209_SCAN_TEMP, 0, 12),
+ ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT_REG, ADIS16209_SCAN_ACC_X,
+ BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+ ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT_REG, ADIS16209_SCAN_ACC_Y,
+ BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+ ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC_REG, ADIS16209_SCAN_AUX_ADC, 0, 12),
+ ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT_REG, ADIS16209_SCAN_INCLI_X,
+ 0, 0, 14),
+ ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT_REG, ADIS16209_SCAN_INCLI_Y,
+ 0, 0, 14),
+ ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT_REG, ADIS16209_SCAN_ROT, 0, 0, 14),
+ IIO_CHAN_SOFT_TIMESTAMP(8)
+};
+
+static const struct iio_info adis16209_info = {
+ .read_raw = adis16209_read_raw,
+ .write_raw = adis16209_write_raw,
+ .update_scan_mode = adis_update_scan_mode,
+};
+
+static const char * const adis16209_status_error_msgs[] = {
+ [ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
+ [ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
+ [ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+ [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
+};
+
+static const struct adis_timeout adis16209_timeouts = {
+ .reset_ms = ADIS16209_STARTUP_DELAY_MS,
+ .self_test_ms = ADIS16209_STARTUP_DELAY_MS,
+ .sw_reset_ms = ADIS16209_STARTUP_DELAY_MS,
+};
+
+static const struct adis_data adis16209_data = {
+ .read_delay = 30,
+ .msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
+ .glob_cmd_reg = ADIS16209_CMD_REG,
+ .diag_stat_reg = ADIS16209_STAT_REG,
+
+ .self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
+ .self_test_reg = ADIS16209_MSC_CTRL_REG,
+ .self_test_no_autoclear = true,
+ .timeouts = &adis16209_timeouts,
+
+ .status_error_msgs = adis16209_status_error_msgs,
+ .status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) |
+ BIT(ADIS16209_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) |
+ BIT(ADIS16209_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16209_STAT_POWER_LOW_BIT),
+};
+
+static int adis16209_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct adis *st;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ indio_dev->name = spi->dev.driver->name;
+ indio_dev->info = &adis16209_info;
+ indio_dev->channels = adis16209_channels;
+ indio_dev->num_channels = ARRAY_SIZE(adis16209_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = adis_init(st, indio_dev, spi, &adis16209_data);
+ if (ret)
+ return ret;
+
+ ret = devm_adis_setup_buffer_and_trigger(st, indio_dev, NULL);
+ if (ret)
+ return ret;
+
+ ret = adis_initial_startup(st);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static struct spi_driver adis16209_driver = {
+ .driver = {
+ .name = "adis16209",
+ },
+ .probe = adis16209_probe,
+};
+module_spi_driver(adis16209_driver);
+
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:adis16209");
+MODULE_IMPORT_NS(IIO_ADISLIB);