diff options
Diffstat (limited to 'drivers/iio/adc/aspeed_adc.c')
| -rw-r--r-- | drivers/iio/adc/aspeed_adc.c | 728 |
1 files changed, 728 insertions, 0 deletions
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c new file mode 100644 index 000000000..998e8bcc0 --- /dev/null +++ b/drivers/iio/adc/aspeed_adc.c @@ -0,0 +1,728 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Aspeed AST2400/2500/2600 ADC + * + * Copyright (C) 2017 Google, Inc. + * Copyright (C) 2021 Aspeed Technology Inc. + * + * ADC clock formula: + * Ast2400/Ast2500: + * clock period = period of PCLK * 2 * (ADC0C[31:17] + 1) * (ADC0C[9:0] + 1) + * Ast2600: + * clock period = period of PCLK * 2 * (ADC0C[15:0] + 1) + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/bitfield.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +#include <linux/iio/iio.h> +#include <linux/iio/driver.h> +#include <linux/iopoll.h> + +#define ASPEED_RESOLUTION_BITS 10 +#define ASPEED_CLOCKS_PER_SAMPLE 12 + +#define ASPEED_REG_ENGINE_CONTROL 0x00 +#define ASPEED_REG_INTERRUPT_CONTROL 0x04 +#define ASPEED_REG_VGA_DETECT_CONTROL 0x08 +#define ASPEED_REG_CLOCK_CONTROL 0x0C +#define ASPEED_REG_COMPENSATION_TRIM 0xC4 +/* + * The register offset between 0xC8~0xCC can be read and won't affect the + * hardware logic in each version of ADC. + */ +#define ASPEED_REG_MAX 0xD0 + +#define ASPEED_ADC_ENGINE_ENABLE BIT(0) +#define ASPEED_ADC_OP_MODE GENMASK(3, 1) +#define ASPEED_ADC_OP_MODE_PWR_DOWN 0 +#define ASPEED_ADC_OP_MODE_STANDBY 1 +#define ASPEED_ADC_OP_MODE_NORMAL 7 +#define ASPEED_ADC_CTRL_COMPENSATION BIT(4) +#define ASPEED_ADC_AUTO_COMPENSATION BIT(5) +/* + * Bit 6 determines not only the reference voltage range but also the dividing + * circuit for battery sensing. + */ +#define ASPEED_ADC_REF_VOLTAGE GENMASK(7, 6) +#define ASPEED_ADC_REF_VOLTAGE_2500mV 0 +#define ASPEED_ADC_REF_VOLTAGE_1200mV 1 +#define ASPEED_ADC_REF_VOLTAGE_EXT_HIGH 2 +#define ASPEED_ADC_REF_VOLTAGE_EXT_LOW 3 +#define ASPEED_ADC_BAT_SENSING_DIV BIT(6) +#define ASPEED_ADC_BAT_SENSING_DIV_2_3 0 +#define ASPEED_ADC_BAT_SENSING_DIV_1_3 1 +#define ASPEED_ADC_CTRL_INIT_RDY BIT(8) +#define ASPEED_ADC_CH7_MODE BIT(12) +#define ASPEED_ADC_CH7_NORMAL 0 +#define ASPEED_ADC_CH7_BAT 1 +#define ASPEED_ADC_BAT_SENSING_ENABLE BIT(13) +#define ASPEED_ADC_CTRL_CHANNEL GENMASK(31, 16) +#define ASPEED_ADC_CTRL_CHANNEL_ENABLE(ch) FIELD_PREP(ASPEED_ADC_CTRL_CHANNEL, BIT(ch)) + +#define ASPEED_ADC_INIT_POLLING_TIME 500 +#define ASPEED_ADC_INIT_TIMEOUT 500000 +/* + * When the sampling rate is too high, the ADC may not have enough charging + * time, resulting in a low voltage value. Thus, the default uses a slow + * sampling rate for most use cases. + */ +#define ASPEED_ADC_DEF_SAMPLING_RATE 65000 + +struct aspeed_adc_trim_locate { + const unsigned int offset; + const unsigned int field; +}; + +struct aspeed_adc_model_data { + const char *model_name; + unsigned int min_sampling_rate; // Hz + unsigned int max_sampling_rate; // Hz + unsigned int vref_fixed_mv; + bool wait_init_sequence; + bool need_prescaler; + bool bat_sense_sup; + u8 scaler_bit_width; + unsigned int num_channels; + const struct aspeed_adc_trim_locate *trim_locate; +}; + +struct adc_gain { + u8 mult; + u8 div; +}; + +struct aspeed_adc_data { + struct device *dev; + const struct aspeed_adc_model_data *model_data; + struct regulator *regulator; + void __iomem *base; + spinlock_t clk_lock; + struct clk_hw *fixed_div_clk; + struct clk_hw *clk_prescaler; + struct clk_hw *clk_scaler; + struct reset_control *rst; + int vref_mv; + u32 sample_period_ns; + int cv; + bool battery_sensing; + struct adc_gain battery_mode_gain; +}; + +#define ASPEED_CHAN(_idx, _data_reg_addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_idx), \ + .address = (_data_reg_addr), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ +} + +static const struct iio_chan_spec aspeed_adc_iio_channels[] = { + ASPEED_CHAN(0, 0x10), + ASPEED_CHAN(1, 0x12), + ASPEED_CHAN(2, 0x14), + ASPEED_CHAN(3, 0x16), + ASPEED_CHAN(4, 0x18), + ASPEED_CHAN(5, 0x1A), + ASPEED_CHAN(6, 0x1C), + ASPEED_CHAN(7, 0x1E), + ASPEED_CHAN(8, 0x20), + ASPEED_CHAN(9, 0x22), + ASPEED_CHAN(10, 0x24), + ASPEED_CHAN(11, 0x26), + ASPEED_CHAN(12, 0x28), + ASPEED_CHAN(13, 0x2A), + ASPEED_CHAN(14, 0x2C), + ASPEED_CHAN(15, 0x2E), +}; + +#define ASPEED_BAT_CHAN(_idx, _data_reg_addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_idx), \ + .address = (_data_reg_addr), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ +} +static const struct iio_chan_spec aspeed_adc_iio_bat_channels[] = { + ASPEED_CHAN(0, 0x10), + ASPEED_CHAN(1, 0x12), + ASPEED_CHAN(2, 0x14), + ASPEED_CHAN(3, 0x16), + ASPEED_CHAN(4, 0x18), + ASPEED_CHAN(5, 0x1A), + ASPEED_CHAN(6, 0x1C), + ASPEED_BAT_CHAN(7, 0x1E), +}; + +static int aspeed_adc_set_trim_data(struct iio_dev *indio_dev) +{ + struct device_node *syscon; + struct regmap *scu; + u32 scu_otp, trimming_val; + struct aspeed_adc_data *data = iio_priv(indio_dev); + + syscon = of_find_node_by_name(NULL, "syscon"); + if (syscon == NULL) { + dev_warn(data->dev, "Couldn't find syscon node\n"); + return -EOPNOTSUPP; + } + scu = syscon_node_to_regmap(syscon); + of_node_put(syscon); + if (IS_ERR(scu)) { + dev_warn(data->dev, "Failed to get syscon regmap\n"); + return -EOPNOTSUPP; + } + if (data->model_data->trim_locate) { + if (regmap_read(scu, data->model_data->trim_locate->offset, + &scu_otp)) { + dev_warn(data->dev, + "Failed to get adc trimming data\n"); + trimming_val = 0x8; + } else { + trimming_val = + ((scu_otp) & + (data->model_data->trim_locate->field)) >> + __ffs(data->model_data->trim_locate->field); + if (!trimming_val) + trimming_val = 0x8; + } + dev_dbg(data->dev, + "trimming val = %d, offset = %08x, fields = %08x\n", + trimming_val, data->model_data->trim_locate->offset, + data->model_data->trim_locate->field); + writel(trimming_val, data->base + ASPEED_REG_COMPENSATION_TRIM); + } + return 0; +} + +static int aspeed_adc_compensation(struct iio_dev *indio_dev) +{ + struct aspeed_adc_data *data = iio_priv(indio_dev); + u32 index, adc_raw = 0; + u32 adc_engine_control_reg_val; + + adc_engine_control_reg_val = + readl(data->base + ASPEED_REG_ENGINE_CONTROL); + adc_engine_control_reg_val &= ~ASPEED_ADC_OP_MODE; + adc_engine_control_reg_val |= + (FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_NORMAL) | + ASPEED_ADC_ENGINE_ENABLE); + /* + * Enable compensating sensing: + * After that, the input voltage of ADC will force to half of the reference + * voltage. So the expected reading raw data will become half of the max + * value. We can get compensating value = 0x200 - ADC read raw value. + * It is recommended to average at least 10 samples to get a final CV. + */ + writel(adc_engine_control_reg_val | ASPEED_ADC_CTRL_COMPENSATION | + ASPEED_ADC_CTRL_CHANNEL_ENABLE(0), + data->base + ASPEED_REG_ENGINE_CONTROL); + /* + * After enable compensating sensing mode need to wait some time for ADC stable + * Experiment result is 1ms. + */ + mdelay(1); + + for (index = 0; index < 16; index++) { + /* + * Waiting for the sampling period ensures that the value acquired + * is fresh each time. + */ + ndelay(data->sample_period_ns); + adc_raw += readw(data->base + aspeed_adc_iio_channels[0].address); + } + adc_raw >>= 4; + data->cv = BIT(ASPEED_RESOLUTION_BITS - 1) - adc_raw; + writel(adc_engine_control_reg_val, + data->base + ASPEED_REG_ENGINE_CONTROL); + dev_dbg(data->dev, "Compensating value = %d\n", data->cv); + + return 0; +} + +static int aspeed_adc_set_sampling_rate(struct iio_dev *indio_dev, u32 rate) +{ + struct aspeed_adc_data *data = iio_priv(indio_dev); + + if (rate < data->model_data->min_sampling_rate || + rate > data->model_data->max_sampling_rate) + return -EINVAL; + /* Each sampling needs 12 clocks to convert.*/ + clk_set_rate(data->clk_scaler->clk, rate * ASPEED_CLOCKS_PER_SAMPLE); + rate = clk_get_rate(data->clk_scaler->clk); + data->sample_period_ns = DIV_ROUND_UP_ULL( + (u64)NSEC_PER_SEC * ASPEED_CLOCKS_PER_SAMPLE, rate); + dev_dbg(data->dev, "Adc clock = %d sample period = %d ns", rate, + data->sample_period_ns); + + return 0; +} + +static int aspeed_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct aspeed_adc_data *data = iio_priv(indio_dev); + u32 adc_engine_control_reg_val; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (data->battery_sensing && chan->channel == 7) { + adc_engine_control_reg_val = + readl(data->base + ASPEED_REG_ENGINE_CONTROL); + writel(adc_engine_control_reg_val | + FIELD_PREP(ASPEED_ADC_CH7_MODE, + ASPEED_ADC_CH7_BAT) | + ASPEED_ADC_BAT_SENSING_ENABLE, + data->base + ASPEED_REG_ENGINE_CONTROL); + /* + * After enable battery sensing mode need to wait some time for adc stable + * Experiment result is 1ms. + */ + mdelay(1); + *val = readw(data->base + chan->address); + *val = (*val * data->battery_mode_gain.mult) / + data->battery_mode_gain.div; + /* Restore control register value */ + writel(adc_engine_control_reg_val, + data->base + ASPEED_REG_ENGINE_CONTROL); + } else + *val = readw(data->base + chan->address); + return IIO_VAL_INT; + + case IIO_CHAN_INFO_OFFSET: + if (data->battery_sensing && chan->channel == 7) + *val = (data->cv * data->battery_mode_gain.mult) / + data->battery_mode_gain.div; + else + *val = data->cv; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = data->vref_mv; + *val2 = ASPEED_RESOLUTION_BITS; + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = clk_get_rate(data->clk_scaler->clk) / + ASPEED_CLOCKS_PER_SAMPLE; + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int aspeed_adc_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return aspeed_adc_set_sampling_rate(indio_dev, val); + + case IIO_CHAN_INFO_SCALE: + case IIO_CHAN_INFO_RAW: + /* + * Technically, these could be written but the only reasons + * for doing so seem better handled in userspace. EPERM is + * returned to signal this is a policy choice rather than a + * hardware limitation. + */ + return -EPERM; + + default: + return -EINVAL; + } +} + +static int aspeed_adc_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, + unsigned int *readval) +{ + struct aspeed_adc_data *data = iio_priv(indio_dev); + + if (!readval || reg % 4 || reg > ASPEED_REG_MAX) + return -EINVAL; + + *readval = readl(data->base + reg); + + return 0; +} + +static const struct iio_info aspeed_adc_iio_info = { + .read_raw = aspeed_adc_read_raw, + .write_raw = aspeed_adc_write_raw, + .debugfs_reg_access = aspeed_adc_reg_access, +}; + +static void aspeed_adc_unregister_fixed_divider(void *data) +{ + struct clk_hw *clk = data; + + clk_hw_unregister_fixed_factor(clk); +} + +static void aspeed_adc_reset_assert(void *data) +{ + struct reset_control *rst = data; + + reset_control_assert(rst); +} + +static void aspeed_adc_clk_disable_unprepare(void *data) +{ + struct clk *clk = data; + + clk_disable_unprepare(clk); +} + +static void aspeed_adc_power_down(void *data) +{ + struct aspeed_adc_data *priv_data = data; + + writel(FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_PWR_DOWN), + priv_data->base + ASPEED_REG_ENGINE_CONTROL); +} + +static void aspeed_adc_reg_disable(void *data) +{ + struct regulator *reg = data; + + regulator_disable(reg); +} + +static int aspeed_adc_vref_config(struct iio_dev *indio_dev) +{ + struct aspeed_adc_data *data = iio_priv(indio_dev); + int ret; + u32 adc_engine_control_reg_val; + + if (data->model_data->vref_fixed_mv) { + data->vref_mv = data->model_data->vref_fixed_mv; + return 0; + } + adc_engine_control_reg_val = + readl(data->base + ASPEED_REG_ENGINE_CONTROL); + data->regulator = devm_regulator_get_optional(data->dev, "vref"); + if (!IS_ERR(data->regulator)) { + ret = regulator_enable(data->regulator); + if (ret) + return ret; + ret = devm_add_action_or_reset( + data->dev, aspeed_adc_reg_disable, data->regulator); + if (ret) + return ret; + data->vref_mv = regulator_get_voltage(data->regulator); + /* Conversion from uV to mV */ + data->vref_mv /= 1000; + if ((data->vref_mv >= 1550) && (data->vref_mv <= 2700)) + writel(adc_engine_control_reg_val | + FIELD_PREP( + ASPEED_ADC_REF_VOLTAGE, + ASPEED_ADC_REF_VOLTAGE_EXT_HIGH), + data->base + ASPEED_REG_ENGINE_CONTROL); + else if ((data->vref_mv >= 900) && (data->vref_mv <= 1650)) + writel(adc_engine_control_reg_val | + FIELD_PREP( + ASPEED_ADC_REF_VOLTAGE, + ASPEED_ADC_REF_VOLTAGE_EXT_LOW), + data->base + ASPEED_REG_ENGINE_CONTROL); + else { + dev_err(data->dev, "Regulator voltage %d not support", + data->vref_mv); + return -EOPNOTSUPP; + } + } else { + if (PTR_ERR(data->regulator) != -ENODEV) + return PTR_ERR(data->regulator); + data->vref_mv = 2500000; + of_property_read_u32(data->dev->of_node, + "aspeed,int-vref-microvolt", + &data->vref_mv); + /* Conversion from uV to mV */ + data->vref_mv /= 1000; + if (data->vref_mv == 2500) + writel(adc_engine_control_reg_val | + FIELD_PREP(ASPEED_ADC_REF_VOLTAGE, + ASPEED_ADC_REF_VOLTAGE_2500mV), + data->base + ASPEED_REG_ENGINE_CONTROL); + else if (data->vref_mv == 1200) + writel(adc_engine_control_reg_val | + FIELD_PREP(ASPEED_ADC_REF_VOLTAGE, + ASPEED_ADC_REF_VOLTAGE_1200mV), + data->base + ASPEED_REG_ENGINE_CONTROL); + else { + dev_err(data->dev, "Voltage %d not support", data->vref_mv); + return -EOPNOTSUPP; + } + } + + return 0; +} + +static int aspeed_adc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct aspeed_adc_data *data; + int ret; + u32 adc_engine_control_reg_val; + unsigned long scaler_flags = 0; + char clk_name[32], clk_parent_name[32]; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->dev = &pdev->dev; + data->model_data = of_device_get_match_data(&pdev->dev); + platform_set_drvdata(pdev, indio_dev); + + data->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(data->base)) + return PTR_ERR(data->base); + + /* Register ADC clock prescaler with source specified by device tree. */ + spin_lock_init(&data->clk_lock); + snprintf(clk_parent_name, ARRAY_SIZE(clk_parent_name), "%s", + of_clk_get_parent_name(pdev->dev.of_node, 0)); + snprintf(clk_name, ARRAY_SIZE(clk_name), "%s-fixed-div", + data->model_data->model_name); + data->fixed_div_clk = clk_hw_register_fixed_factor( + &pdev->dev, clk_name, clk_parent_name, 0, 1, 2); + if (IS_ERR(data->fixed_div_clk)) + return PTR_ERR(data->fixed_div_clk); + + ret = devm_add_action_or_reset(data->dev, + aspeed_adc_unregister_fixed_divider, + data->fixed_div_clk); + if (ret) + return ret; + snprintf(clk_parent_name, ARRAY_SIZE(clk_parent_name), clk_name); + + if (data->model_data->need_prescaler) { + snprintf(clk_name, ARRAY_SIZE(clk_name), "%s-prescaler", + data->model_data->model_name); + data->clk_prescaler = devm_clk_hw_register_divider( + &pdev->dev, clk_name, clk_parent_name, 0, + data->base + ASPEED_REG_CLOCK_CONTROL, 17, 15, 0, + &data->clk_lock); + if (IS_ERR(data->clk_prescaler)) + return PTR_ERR(data->clk_prescaler); + snprintf(clk_parent_name, ARRAY_SIZE(clk_parent_name), + clk_name); + scaler_flags = CLK_SET_RATE_PARENT; + } + /* + * Register ADC clock scaler downstream from the prescaler. Allow rate + * setting to adjust the prescaler as well. + */ + snprintf(clk_name, ARRAY_SIZE(clk_name), "%s-scaler", + data->model_data->model_name); + data->clk_scaler = devm_clk_hw_register_divider( + &pdev->dev, clk_name, clk_parent_name, scaler_flags, + data->base + ASPEED_REG_CLOCK_CONTROL, 0, + data->model_data->scaler_bit_width, + data->model_data->need_prescaler ? CLK_DIVIDER_ONE_BASED : 0, + &data->clk_lock); + if (IS_ERR(data->clk_scaler)) + return PTR_ERR(data->clk_scaler); + + data->rst = devm_reset_control_get_shared(&pdev->dev, NULL); + if (IS_ERR(data->rst)) { + dev_err(&pdev->dev, + "invalid or missing reset controller device tree entry"); + return PTR_ERR(data->rst); + } + reset_control_deassert(data->rst); + + ret = devm_add_action_or_reset(data->dev, aspeed_adc_reset_assert, + data->rst); + if (ret) + return ret; + + ret = aspeed_adc_vref_config(indio_dev); + if (ret) + return ret; + + ret = aspeed_adc_set_trim_data(indio_dev); + if (ret) + return ret; + + if (of_find_property(data->dev->of_node, "aspeed,battery-sensing", + NULL)) { + if (data->model_data->bat_sense_sup) { + data->battery_sensing = 1; + if (readl(data->base + ASPEED_REG_ENGINE_CONTROL) & + ASPEED_ADC_BAT_SENSING_DIV) { + data->battery_mode_gain.mult = 3; + data->battery_mode_gain.div = 1; + } else { + data->battery_mode_gain.mult = 3; + data->battery_mode_gain.div = 2; + } + } else + dev_warn(&pdev->dev, + "Failed to enable battery-sensing mode\n"); + } + + ret = clk_prepare_enable(data->clk_scaler->clk); + if (ret) + return ret; + ret = devm_add_action_or_reset(data->dev, + aspeed_adc_clk_disable_unprepare, + data->clk_scaler->clk); + if (ret) + return ret; + ret = aspeed_adc_set_sampling_rate(indio_dev, + ASPEED_ADC_DEF_SAMPLING_RATE); + if (ret) + return ret; + + adc_engine_control_reg_val = + readl(data->base + ASPEED_REG_ENGINE_CONTROL); + adc_engine_control_reg_val |= + FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_NORMAL) | + ASPEED_ADC_ENGINE_ENABLE; + /* Enable engine in normal mode. */ + writel(adc_engine_control_reg_val, + data->base + ASPEED_REG_ENGINE_CONTROL); + + ret = devm_add_action_or_reset(data->dev, aspeed_adc_power_down, + data); + if (ret) + return ret; + + if (data->model_data->wait_init_sequence) { + /* Wait for initial sequence complete. */ + ret = readl_poll_timeout(data->base + ASPEED_REG_ENGINE_CONTROL, + adc_engine_control_reg_val, + adc_engine_control_reg_val & + ASPEED_ADC_CTRL_INIT_RDY, + ASPEED_ADC_INIT_POLLING_TIME, + ASPEED_ADC_INIT_TIMEOUT); + if (ret) + return ret; + } + + aspeed_adc_compensation(indio_dev); + /* Start all channels in normal mode. */ + adc_engine_control_reg_val = + readl(data->base + ASPEED_REG_ENGINE_CONTROL); + adc_engine_control_reg_val |= ASPEED_ADC_CTRL_CHANNEL; + writel(adc_engine_control_reg_val, + data->base + ASPEED_REG_ENGINE_CONTROL); + + indio_dev->name = data->model_data->model_name; + indio_dev->info = &aspeed_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = data->battery_sensing ? + aspeed_adc_iio_bat_channels : + aspeed_adc_iio_channels; + indio_dev->num_channels = data->model_data->num_channels; + + ret = devm_iio_device_register(data->dev, indio_dev); + return ret; +} + +static const struct aspeed_adc_trim_locate ast2500_adc_trim = { + .offset = 0x154, + .field = GENMASK(31, 28), +}; + +static const struct aspeed_adc_trim_locate ast2600_adc0_trim = { + .offset = 0x5d0, + .field = GENMASK(3, 0), +}; + +static const struct aspeed_adc_trim_locate ast2600_adc1_trim = { + .offset = 0x5d0, + .field = GENMASK(7, 4), +}; + +static const struct aspeed_adc_model_data ast2400_model_data = { + .model_name = "ast2400-adc", + .vref_fixed_mv = 2500, + .min_sampling_rate = 10000, + .max_sampling_rate = 500000, + .need_prescaler = true, + .scaler_bit_width = 10, + .num_channels = 16, +}; + +static const struct aspeed_adc_model_data ast2500_model_data = { + .model_name = "ast2500-adc", + .vref_fixed_mv = 1800, + .min_sampling_rate = 1, + .max_sampling_rate = 1000000, + .wait_init_sequence = true, + .need_prescaler = true, + .scaler_bit_width = 10, + .num_channels = 16, + .trim_locate = &ast2500_adc_trim, +}; + +static const struct aspeed_adc_model_data ast2600_adc0_model_data = { + .model_name = "ast2600-adc0", + .min_sampling_rate = 10000, + .max_sampling_rate = 500000, + .wait_init_sequence = true, + .bat_sense_sup = true, + .scaler_bit_width = 16, + .num_channels = 8, + .trim_locate = &ast2600_adc0_trim, +}; + +static const struct aspeed_adc_model_data ast2600_adc1_model_data = { + .model_name = "ast2600-adc1", + .min_sampling_rate = 10000, + .max_sampling_rate = 500000, + .wait_init_sequence = true, + .bat_sense_sup = true, + .scaler_bit_width = 16, + .num_channels = 8, + .trim_locate = &ast2600_adc1_trim, +}; + +static const struct of_device_id aspeed_adc_matches[] = { + { .compatible = "aspeed,ast2400-adc", .data = &ast2400_model_data }, + { .compatible = "aspeed,ast2500-adc", .data = &ast2500_model_data }, + { .compatible = "aspeed,ast2600-adc0", .data = &ast2600_adc0_model_data }, + { .compatible = "aspeed,ast2600-adc1", .data = &ast2600_adc1_model_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, aspeed_adc_matches); + +static struct platform_driver aspeed_adc_driver = { + .probe = aspeed_adc_probe, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = aspeed_adc_matches, + } +}; + +module_platform_driver(aspeed_adc_driver); + +MODULE_AUTHOR("Rick Altherr <raltherr@google.com>"); +MODULE_DESCRIPTION("Aspeed AST2400/2500/2600 ADC Driver"); +MODULE_LICENSE("GPL"); |