diff options
Diffstat (limited to 'drivers/iio/adc/sc27xx_adc.c')
| -rw-r--r-- | drivers/iio/adc/sc27xx_adc.c | 965 |
1 files changed, 965 insertions, 0 deletions
diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c new file mode 100644 index 000000000..f8421cbba --- /dev/null +++ b/drivers/iio/adc/sc27xx_adc.c @@ -0,0 +1,965 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 Spreadtrum Communications Inc. + +#include <linux/hwspinlock.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +/* PMIC global registers definition */ +#define SC2730_MODULE_EN 0x1808 +#define SC2731_MODULE_EN 0xc08 +#define SC27XX_MODULE_ADC_EN BIT(5) +#define SC2721_ARM_CLK_EN 0xc0c +#define SC2730_ARM_CLK_EN 0x180c +#define SC2731_ARM_CLK_EN 0xc10 +#define SC27XX_CLK_ADC_EN BIT(5) +#define SC27XX_CLK_ADC_CLK_EN BIT(6) + +/* ADC controller registers definition */ +#define SC27XX_ADC_CTL 0x0 +#define SC27XX_ADC_CH_CFG 0x4 +#define SC27XX_ADC_DATA 0x4c +#define SC27XX_ADC_INT_EN 0x50 +#define SC27XX_ADC_INT_CLR 0x54 +#define SC27XX_ADC_INT_STS 0x58 +#define SC27XX_ADC_INT_RAW 0x5c + +/* Bits and mask definition for SC27XX_ADC_CTL register */ +#define SC27XX_ADC_EN BIT(0) +#define SC27XX_ADC_CHN_RUN BIT(1) +#define SC27XX_ADC_12BIT_MODE BIT(2) +#define SC27XX_ADC_RUN_NUM_MASK GENMASK(7, 4) +#define SC27XX_ADC_RUN_NUM_SHIFT 4 + +/* Bits and mask definition for SC27XX_ADC_CH_CFG register */ +#define SC27XX_ADC_CHN_ID_MASK GENMASK(4, 0) +#define SC27XX_ADC_SCALE_MASK GENMASK(10, 9) +#define SC2721_ADC_SCALE_MASK BIT(5) +#define SC27XX_ADC_SCALE_SHIFT 9 +#define SC2721_ADC_SCALE_SHIFT 5 + +/* Bits definitions for SC27XX_ADC_INT_EN registers */ +#define SC27XX_ADC_IRQ_EN BIT(0) + +/* Bits definitions for SC27XX_ADC_INT_CLR registers */ +#define SC27XX_ADC_IRQ_CLR BIT(0) + +/* Bits definitions for SC27XX_ADC_INT_RAW registers */ +#define SC27XX_ADC_IRQ_RAW BIT(0) + +/* Mask definition for SC27XX_ADC_DATA register */ +#define SC27XX_ADC_DATA_MASK GENMASK(11, 0) + +/* Timeout (ms) for the trylock of hardware spinlocks */ +#define SC27XX_ADC_HWLOCK_TIMEOUT 5000 + +/* Timeout (us) for ADC data conversion according to ADC datasheet */ +#define SC27XX_ADC_RDY_TIMEOUT 1000000 +#define SC27XX_ADC_POLL_RAW_STATUS 500 + +/* Maximum ADC channel number */ +#define SC27XX_ADC_CHANNEL_MAX 32 + +/* ADC voltage ratio definition */ +#define SC27XX_VOLT_RATIO(n, d) \ + (((n) << SC27XX_RATIO_NUMERATOR_OFFSET) | (d)) +#define SC27XX_RATIO_NUMERATOR_OFFSET 16 +#define SC27XX_RATIO_DENOMINATOR_MASK GENMASK(15, 0) + +/* ADC specific channel reference voltage 3.5V */ +#define SC27XX_ADC_REFVOL_VDD35 3500000 + +/* ADC default channel reference voltage is 2.8V */ +#define SC27XX_ADC_REFVOL_VDD28 2800000 + +struct sc27xx_adc_data { + struct device *dev; + struct regulator *volref; + struct regmap *regmap; + /* + * One hardware spinlock to synchronize between the multiple + * subsystems which will access the unique ADC controller. + */ + struct hwspinlock *hwlock; + int channel_scale[SC27XX_ADC_CHANNEL_MAX]; + u32 base; + int irq; + const struct sc27xx_adc_variant_data *var_data; +}; + +/* + * Since different PMICs of SC27xx series can have different + * address and ratio, we should save ratio config and base + * in the device data structure. + */ +struct sc27xx_adc_variant_data { + u32 module_en; + u32 clk_en; + u32 scale_shift; + u32 scale_mask; + const struct sc27xx_adc_linear_graph *bscale_cal; + const struct sc27xx_adc_linear_graph *sscale_cal; + void (*init_scale)(struct sc27xx_adc_data *data); + int (*get_ratio)(int channel, int scale); + bool set_volref; +}; + +struct sc27xx_adc_linear_graph { + int volt0; + int adc0; + int volt1; + int adc1; +}; + +/* + * According to the datasheet, we can convert one ADC value to one voltage value + * through 2 points in the linear graph. If the voltage is less than 1.2v, we + * should use the small-scale graph, and if more than 1.2v, we should use the + * big-scale graph. + */ +static struct sc27xx_adc_linear_graph big_scale_graph = { + 4200, 3310, + 3600, 2832, +}; + +static struct sc27xx_adc_linear_graph small_scale_graph = { + 1000, 3413, + 100, 341, +}; + +static const struct sc27xx_adc_linear_graph sc2731_big_scale_graph_calib = { + 4200, 850, + 3600, 728, +}; + +static const struct sc27xx_adc_linear_graph sc2731_small_scale_graph_calib = { + 1000, 838, + 100, 84, +}; + +static const struct sc27xx_adc_linear_graph big_scale_graph_calib = { + 4200, 856, + 3600, 733, +}; + +static const struct sc27xx_adc_linear_graph small_scale_graph_calib = { + 1000, 833, + 100, 80, +}; + +static int sc27xx_adc_get_calib_data(u32 calib_data, int calib_adc) +{ + return ((calib_data & 0xff) + calib_adc - 128) * 4; +} + +/* get the adc nvmem cell calibration data */ +static int adc_nvmem_cell_calib_data(struct sc27xx_adc_data *data, const char *cell_name) +{ + struct nvmem_cell *cell; + void *buf; + u32 origin_calib_data = 0; + size_t len; + + if (!data) + return -EINVAL; + + cell = nvmem_cell_get(data->dev, cell_name); + if (IS_ERR(cell)) + return PTR_ERR(cell); + + buf = nvmem_cell_read(cell, &len); + if (IS_ERR(buf)) { + nvmem_cell_put(cell); + return PTR_ERR(buf); + } + + memcpy(&origin_calib_data, buf, min(len, sizeof(u32))); + + kfree(buf); + nvmem_cell_put(cell); + return origin_calib_data; +} + +static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data, + bool big_scale) +{ + const struct sc27xx_adc_linear_graph *calib_graph; + struct sc27xx_adc_linear_graph *graph; + const char *cell_name; + u32 calib_data = 0; + + if (big_scale) { + calib_graph = data->var_data->bscale_cal; + graph = &big_scale_graph; + cell_name = "big_scale_calib"; + } else { + calib_graph = data->var_data->sscale_cal; + graph = &small_scale_graph; + cell_name = "small_scale_calib"; + } + + calib_data = adc_nvmem_cell_calib_data(data, cell_name); + + /* Only need to calibrate the adc values in the linear graph. */ + graph->adc0 = sc27xx_adc_get_calib_data(calib_data, calib_graph->adc0); + graph->adc1 = sc27xx_adc_get_calib_data(calib_data >> 8, + calib_graph->adc1); + + return 0; +} + +static int sc2720_adc_get_ratio(int channel, int scale) +{ + switch (channel) { + case 14: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(68, 900); + case 1: + return SC27XX_VOLT_RATIO(68, 1760); + case 2: + return SC27XX_VOLT_RATIO(68, 2327); + case 3: + return SC27XX_VOLT_RATIO(68, 3654); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + case 16: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(48, 100); + case 1: + return SC27XX_VOLT_RATIO(480, 1955); + case 2: + return SC27XX_VOLT_RATIO(480, 2586); + case 3: + return SC27XX_VOLT_RATIO(48, 406); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + case 21: + case 22: + case 23: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(3, 8); + case 1: + return SC27XX_VOLT_RATIO(375, 1955); + case 2: + return SC27XX_VOLT_RATIO(375, 2586); + case 3: + return SC27XX_VOLT_RATIO(300, 3248); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + default: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(1, 1); + case 1: + return SC27XX_VOLT_RATIO(1000, 1955); + case 2: + return SC27XX_VOLT_RATIO(1000, 2586); + case 3: + return SC27XX_VOLT_RATIO(100, 406); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + } + return SC27XX_VOLT_RATIO(1, 1); +} + +static int sc2721_adc_get_ratio(int channel, int scale) +{ + switch (channel) { + case 1: + case 2: + case 3: + case 4: + return scale ? SC27XX_VOLT_RATIO(400, 1025) : + SC27XX_VOLT_RATIO(1, 1); + case 5: + return SC27XX_VOLT_RATIO(7, 29); + case 7: + case 9: + return scale ? SC27XX_VOLT_RATIO(100, 125) : + SC27XX_VOLT_RATIO(1, 1); + case 14: + return SC27XX_VOLT_RATIO(68, 900); + case 16: + return SC27XX_VOLT_RATIO(48, 100); + case 19: + return SC27XX_VOLT_RATIO(1, 3); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + return SC27XX_VOLT_RATIO(1, 1); +} + +static int sc2730_adc_get_ratio(int channel, int scale) +{ + switch (channel) { + case 14: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(68, 900); + case 1: + return SC27XX_VOLT_RATIO(68, 1760); + case 2: + return SC27XX_VOLT_RATIO(68, 2327); + case 3: + return SC27XX_VOLT_RATIO(68, 3654); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + case 15: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(1, 3); + case 1: + return SC27XX_VOLT_RATIO(1000, 5865); + case 2: + return SC27XX_VOLT_RATIO(500, 3879); + case 3: + return SC27XX_VOLT_RATIO(500, 6090); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + case 16: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(48, 100); + case 1: + return SC27XX_VOLT_RATIO(480, 1955); + case 2: + return SC27XX_VOLT_RATIO(480, 2586); + case 3: + return SC27XX_VOLT_RATIO(48, 406); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + case 21: + case 22: + case 23: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(3, 8); + case 1: + return SC27XX_VOLT_RATIO(375, 1955); + case 2: + return SC27XX_VOLT_RATIO(375, 2586); + case 3: + return SC27XX_VOLT_RATIO(300, 3248); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + default: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(1, 1); + case 1: + return SC27XX_VOLT_RATIO(1000, 1955); + case 2: + return SC27XX_VOLT_RATIO(1000, 2586); + case 3: + return SC27XX_VOLT_RATIO(1000, 4060); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + } + return SC27XX_VOLT_RATIO(1, 1); +} + +static int sc2731_adc_get_ratio(int channel, int scale) +{ + switch (channel) { + case 1: + case 2: + case 3: + case 4: + return scale ? SC27XX_VOLT_RATIO(400, 1025) : + SC27XX_VOLT_RATIO(1, 1); + case 5: + return SC27XX_VOLT_RATIO(7, 29); + case 6: + return SC27XX_VOLT_RATIO(375, 9000); + case 7: + case 8: + return scale ? SC27XX_VOLT_RATIO(100, 125) : + SC27XX_VOLT_RATIO(1, 1); + case 19: + return SC27XX_VOLT_RATIO(1, 3); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + return SC27XX_VOLT_RATIO(1, 1); +} + +/* + * According to the datasheet set specific value on some channel. + */ +static void sc2720_adc_scale_init(struct sc27xx_adc_data *data) +{ + int i; + + for (i = 0; i < SC27XX_ADC_CHANNEL_MAX; i++) { + switch (i) { + case 5: + data->channel_scale[i] = 3; + break; + case 7: + case 9: + data->channel_scale[i] = 2; + break; + case 13: + data->channel_scale[i] = 1; + break; + case 19: + case 30: + case 31: + data->channel_scale[i] = 3; + break; + default: + data->channel_scale[i] = 0; + break; + } + } +} + +static void sc2730_adc_scale_init(struct sc27xx_adc_data *data) +{ + int i; + + for (i = 0; i < SC27XX_ADC_CHANNEL_MAX; i++) { + switch (i) { + case 5: + case 10: + case 19: + case 30: + case 31: + data->channel_scale[i] = 3; + break; + case 7: + case 9: + data->channel_scale[i] = 2; + break; + case 13: + data->channel_scale[i] = 1; + break; + default: + data->channel_scale[i] = 0; + break; + } + } +} + +static void sc2731_adc_scale_init(struct sc27xx_adc_data *data) +{ + int i; + /* + * In the current software design, SC2731 support 2 scales, + * channels 5 uses big scale, others use smale. + */ + for (i = 0; i < SC27XX_ADC_CHANNEL_MAX; i++) { + switch (i) { + case 5: + data->channel_scale[i] = 1; + break; + default: + data->channel_scale[i] = 0; + break; + } + } +} + +static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel, + int scale, int *val) +{ + int ret, ret_volref; + u32 tmp, value, status; + + ret = hwspin_lock_timeout_raw(data->hwlock, SC27XX_ADC_HWLOCK_TIMEOUT); + if (ret) { + dev_err(data->dev, "timeout to get the hwspinlock\n"); + return ret; + } + + /* + * According to the sc2721 chip data sheet, the reference voltage of + * specific channel 30 and channel 31 in ADC module needs to be set from + * the default 2.8v to 3.5v. + */ + if ((data->var_data->set_volref) && (channel == 30 || channel == 31)) { + ret = regulator_set_voltage(data->volref, + SC27XX_ADC_REFVOL_VDD35, + SC27XX_ADC_REFVOL_VDD35); + if (ret) { + dev_err(data->dev, "failed to set the volref 3.5v\n"); + goto unlock_adc; + } + } + + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL, + SC27XX_ADC_EN, SC27XX_ADC_EN); + if (ret) + goto regulator_restore; + + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR, + SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR); + if (ret) + goto disable_adc; + + /* Configure the channel id and scale */ + tmp = (scale << data->var_data->scale_shift) & data->var_data->scale_mask; + tmp |= channel & SC27XX_ADC_CHN_ID_MASK; + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CH_CFG, + SC27XX_ADC_CHN_ID_MASK | + data->var_data->scale_mask, + tmp); + if (ret) + goto disable_adc; + + /* Select 12bit conversion mode, and only sample 1 time */ + tmp = SC27XX_ADC_12BIT_MODE; + tmp |= (0 << SC27XX_ADC_RUN_NUM_SHIFT) & SC27XX_ADC_RUN_NUM_MASK; + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL, + SC27XX_ADC_RUN_NUM_MASK | SC27XX_ADC_12BIT_MODE, + tmp); + if (ret) + goto disable_adc; + + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL, + SC27XX_ADC_CHN_RUN, SC27XX_ADC_CHN_RUN); + if (ret) + goto disable_adc; + + ret = regmap_read_poll_timeout(data->regmap, + data->base + SC27XX_ADC_INT_RAW, + status, (status & SC27XX_ADC_IRQ_RAW), + SC27XX_ADC_POLL_RAW_STATUS, + SC27XX_ADC_RDY_TIMEOUT); + if (ret) { + dev_err(data->dev, "read adc timeout, status = 0x%x\n", status); + goto disable_adc; + } + + ret = regmap_read(data->regmap, data->base + SC27XX_ADC_DATA, &value); + if (ret) + goto disable_adc; + + value &= SC27XX_ADC_DATA_MASK; + +disable_adc: + regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL, + SC27XX_ADC_EN, 0); +regulator_restore: + if ((data->var_data->set_volref) && (channel == 30 || channel == 31)) { + ret_volref = regulator_set_voltage(data->volref, + SC27XX_ADC_REFVOL_VDD28, + SC27XX_ADC_REFVOL_VDD28); + if (ret_volref) { + dev_err(data->dev, "failed to set the volref 2.8v,ret_volref = 0x%x\n", + ret_volref); + ret = ret || ret_volref; + } + } +unlock_adc: + hwspin_unlock_raw(data->hwlock); + + if (!ret) + *val = value; + + return ret; +} + +static void sc27xx_adc_volt_ratio(struct sc27xx_adc_data *data, int channel, int scale, + struct u32_fract *fract) +{ + u32 ratio; + + ratio = data->var_data->get_ratio(channel, scale); + fract->numerator = ratio >> SC27XX_RATIO_NUMERATOR_OFFSET; + fract->denominator = ratio & SC27XX_RATIO_DENOMINATOR_MASK; +} + +static int adc_to_volt(struct sc27xx_adc_linear_graph *graph, + int raw_adc) +{ + int tmp; + + tmp = (graph->volt0 - graph->volt1) * (raw_adc - graph->adc1); + tmp /= (graph->adc0 - graph->adc1); + tmp += graph->volt1; + + return tmp; +} + +static int sc27xx_adc_to_volt(struct sc27xx_adc_linear_graph *graph, + int raw_adc) +{ + int tmp; + + tmp = adc_to_volt(graph, raw_adc); + + return tmp < 0 ? 0 : tmp; +} + +static int sc27xx_adc_convert_volt(struct sc27xx_adc_data *data, int channel, + int scale, int raw_adc) +{ + struct u32_fract fract; + u32 volt; + + /* + * Convert ADC values to voltage values according to the linear graph, + * and channel 5 and channel 1 has been calibrated, so we can just + * return the voltage values calculated by the linear graph. But other + * channels need be calculated to the real voltage values with the + * voltage ratio. + */ + switch (channel) { + case 5: + return sc27xx_adc_to_volt(&big_scale_graph, raw_adc); + + case 1: + return sc27xx_adc_to_volt(&small_scale_graph, raw_adc); + + default: + volt = sc27xx_adc_to_volt(&small_scale_graph, raw_adc); + break; + } + + sc27xx_adc_volt_ratio(data, channel, scale, &fract); + + return DIV_ROUND_CLOSEST(volt * fract.denominator, fract.numerator); +} + +static int sc27xx_adc_read_processed(struct sc27xx_adc_data *data, + int channel, int scale, int *val) +{ + int ret, raw_adc; + + ret = sc27xx_adc_read(data, channel, scale, &raw_adc); + if (ret) + return ret; + + *val = sc27xx_adc_convert_volt(data, channel, scale, raw_adc); + return 0; +} + +static int sc27xx_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct sc27xx_adc_data *data = iio_priv(indio_dev); + int scale = data->channel_scale[chan->channel]; + int ret, tmp; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + ret = sc27xx_adc_read(data, chan->channel, scale, &tmp); + mutex_unlock(&indio_dev->mlock); + + if (ret) + return ret; + + *val = tmp; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_PROCESSED: + mutex_lock(&indio_dev->mlock); + ret = sc27xx_adc_read_processed(data, chan->channel, scale, + &tmp); + mutex_unlock(&indio_dev->mlock); + + if (ret) + return ret; + + *val = tmp; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = scale; + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int sc27xx_adc_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct sc27xx_adc_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + data->channel_scale[chan->channel] = val; + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static const struct iio_info sc27xx_info = { + .read_raw = &sc27xx_adc_read_raw, + .write_raw = &sc27xx_adc_write_raw, +}; + +#define SC27XX_ADC_CHANNEL(index, mask) { \ + .type = IIO_VOLTAGE, \ + .channel = index, \ + .info_mask_separate = mask | BIT(IIO_CHAN_INFO_SCALE), \ + .datasheet_name = "CH##index", \ + .indexed = 1, \ +} + +static const struct iio_chan_spec sc27xx_channels[] = { + SC27XX_ADC_CHANNEL(0, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(1, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(2, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(3, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(4, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(5, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(6, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(7, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(8, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(9, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(10, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(11, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(12, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(13, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(14, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(15, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(16, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(17, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(18, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(19, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(20, BIT(IIO_CHAN_INFO_RAW)), + SC27XX_ADC_CHANNEL(21, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(22, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(23, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(24, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(25, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(26, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(27, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(28, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(29, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(30, BIT(IIO_CHAN_INFO_PROCESSED)), + SC27XX_ADC_CHANNEL(31, BIT(IIO_CHAN_INFO_PROCESSED)), +}; + +static int sc27xx_adc_enable(struct sc27xx_adc_data *data) +{ + int ret; + + ret = regmap_update_bits(data->regmap, data->var_data->module_en, + SC27XX_MODULE_ADC_EN, SC27XX_MODULE_ADC_EN); + if (ret) + return ret; + + /* Enable ADC work clock and controller clock */ + ret = regmap_update_bits(data->regmap, data->var_data->clk_en, + SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, + SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN); + if (ret) + goto disable_adc; + + /* ADC channel scales' calibration from nvmem device */ + ret = sc27xx_adc_scale_calibration(data, true); + if (ret) + goto disable_clk; + + ret = sc27xx_adc_scale_calibration(data, false); + if (ret) + goto disable_clk; + + return 0; + +disable_clk: + regmap_update_bits(data->regmap, data->var_data->clk_en, + SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0); +disable_adc: + regmap_update_bits(data->regmap, data->var_data->module_en, + SC27XX_MODULE_ADC_EN, 0); + + return ret; +} + +static void sc27xx_adc_disable(void *_data) +{ + struct sc27xx_adc_data *data = _data; + + /* Disable ADC work clock and controller clock */ + regmap_update_bits(data->regmap, data->var_data->clk_en, + SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0); + + regmap_update_bits(data->regmap, data->var_data->module_en, + SC27XX_MODULE_ADC_EN, 0); +} + +static const struct sc27xx_adc_variant_data sc2731_data = { + .module_en = SC2731_MODULE_EN, + .clk_en = SC2731_ARM_CLK_EN, + .scale_shift = SC27XX_ADC_SCALE_SHIFT, + .scale_mask = SC27XX_ADC_SCALE_MASK, + .bscale_cal = &sc2731_big_scale_graph_calib, + .sscale_cal = &sc2731_small_scale_graph_calib, + .init_scale = sc2731_adc_scale_init, + .get_ratio = sc2731_adc_get_ratio, + .set_volref = false, +}; + +static const struct sc27xx_adc_variant_data sc2730_data = { + .module_en = SC2730_MODULE_EN, + .clk_en = SC2730_ARM_CLK_EN, + .scale_shift = SC27XX_ADC_SCALE_SHIFT, + .scale_mask = SC27XX_ADC_SCALE_MASK, + .bscale_cal = &big_scale_graph_calib, + .sscale_cal = &small_scale_graph_calib, + .init_scale = sc2730_adc_scale_init, + .get_ratio = sc2730_adc_get_ratio, + .set_volref = false, +}; + +static const struct sc27xx_adc_variant_data sc2721_data = { + .module_en = SC2731_MODULE_EN, + .clk_en = SC2721_ARM_CLK_EN, + .scale_shift = SC2721_ADC_SCALE_SHIFT, + .scale_mask = SC2721_ADC_SCALE_MASK, + .bscale_cal = &sc2731_big_scale_graph_calib, + .sscale_cal = &sc2731_small_scale_graph_calib, + .init_scale = sc2731_adc_scale_init, + .get_ratio = sc2721_adc_get_ratio, + .set_volref = true, +}; + +static const struct sc27xx_adc_variant_data sc2720_data = { + .module_en = SC2731_MODULE_EN, + .clk_en = SC2721_ARM_CLK_EN, + .scale_shift = SC27XX_ADC_SCALE_SHIFT, + .scale_mask = SC27XX_ADC_SCALE_MASK, + .bscale_cal = &big_scale_graph_calib, + .sscale_cal = &small_scale_graph_calib, + .init_scale = sc2720_adc_scale_init, + .get_ratio = sc2720_adc_get_ratio, + .set_volref = false, +}; + +static int sc27xx_adc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct sc27xx_adc_data *sc27xx_data; + const struct sc27xx_adc_variant_data *pdata; + struct iio_dev *indio_dev; + int ret; + + pdata = of_device_get_match_data(dev); + if (!pdata) { + dev_err(dev, "No matching driver data found\n"); + return -EINVAL; + } + + indio_dev = devm_iio_device_alloc(dev, sizeof(*sc27xx_data)); + if (!indio_dev) + return -ENOMEM; + + sc27xx_data = iio_priv(indio_dev); + + sc27xx_data->regmap = dev_get_regmap(dev->parent, NULL); + if (!sc27xx_data->regmap) { + dev_err(dev, "failed to get ADC regmap\n"); + return -ENODEV; + } + + ret = of_property_read_u32(np, "reg", &sc27xx_data->base); + if (ret) { + dev_err(dev, "failed to get ADC base address\n"); + return ret; + } + + sc27xx_data->irq = platform_get_irq(pdev, 0); + if (sc27xx_data->irq < 0) + return sc27xx_data->irq; + + ret = of_hwspin_lock_get_id(np, 0); + if (ret < 0) { + dev_err(dev, "failed to get hwspinlock id\n"); + return ret; + } + + sc27xx_data->hwlock = devm_hwspin_lock_request_specific(dev, ret); + if (!sc27xx_data->hwlock) { + dev_err(dev, "failed to request hwspinlock\n"); + return -ENXIO; + } + + sc27xx_data->dev = dev; + if (pdata->set_volref) { + sc27xx_data->volref = devm_regulator_get(dev, "vref"); + if (IS_ERR(sc27xx_data->volref)) { + ret = PTR_ERR(sc27xx_data->volref); + return dev_err_probe(dev, ret, "failed to get ADC volref\n"); + } + } + + sc27xx_data->var_data = pdata; + sc27xx_data->var_data->init_scale(sc27xx_data); + + ret = sc27xx_adc_enable(sc27xx_data); + if (ret) { + dev_err(dev, "failed to enable ADC module\n"); + return ret; + } + + ret = devm_add_action_or_reset(dev, sc27xx_adc_disable, sc27xx_data); + if (ret) { + dev_err(dev, "failed to add ADC disable action\n"); + return ret; + } + + indio_dev->name = dev_name(dev); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &sc27xx_info; + indio_dev->channels = sc27xx_channels; + indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels); + ret = devm_iio_device_register(dev, indio_dev); + if (ret) + dev_err(dev, "could not register iio (ADC)"); + + return ret; +} + +static const struct of_device_id sc27xx_adc_of_match[] = { + { .compatible = "sprd,sc2731-adc", .data = &sc2731_data}, + { .compatible = "sprd,sc2730-adc", .data = &sc2730_data}, + { .compatible = "sprd,sc2721-adc", .data = &sc2721_data}, + { .compatible = "sprd,sc2720-adc", .data = &sc2720_data}, + { } +}; +MODULE_DEVICE_TABLE(of, sc27xx_adc_of_match); + +static struct platform_driver sc27xx_adc_driver = { + .probe = sc27xx_adc_probe, + .driver = { + .name = "sc27xx-adc", + .of_match_table = sc27xx_adc_of_match, + }, +}; + +module_platform_driver(sc27xx_adc_driver); + +MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>"); +MODULE_DESCRIPTION("Spreadtrum SC27XX ADC Driver"); +MODULE_LICENSE("GPL v2"); |