diff options
Diffstat (limited to 'drivers/iio/proximity/Kconfig')
| -rw-r--r-- | drivers/iio/proximity/Kconfig | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig new file mode 100644 index 000000000..0e5c17530 --- /dev/null +++ b/drivers/iio/proximity/Kconfig @@ -0,0 +1,210 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Proximity sensors +# + +menu "Lightning sensors" + +config AS3935 + tristate "AS3935 Franklin lightning sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on SPI + help + Say Y here to build SPI interface support for the Austrian + Microsystems AS3935 lightning detection sensor. + + To compile this driver as a module, choose M here: the + module will be called as3935 + +endmenu + +menu "Proximity and distance sensors" + +config CROS_EC_MKBP_PROXIMITY + tristate "ChromeOS EC MKBP Proximity sensor" + depends on CROS_EC + help + Say Y here to enable the proximity sensor implemented via the ChromeOS EC MKBP + switches protocol. You must enable one bus option (CROS_EC_I2C or CROS_EC_SPI) + to use this. + + To compile this driver as a module, choose M here: the + module will be called cros_ec_mkbp_proximity. + +config ISL29501 + tristate "Intersil ISL29501 Time Of Flight sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IIO_KFIFO_BUF + help + Say Y here if you want to build a driver for the Intersil ISL29501 + Time of Flight sensor. + + To compile this driver as a module, choose M here: the module will be + called isl29501. + +config LIDAR_LITE_V2 + tristate "PulsedLight LIDAR sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on I2C + help + Say Y to build a driver for PulsedLight LIDAR range finding + sensor. + + To compile this driver as a module, choose M here: the + module will be called pulsedlight-lite-v2 + +config MB1232 + tristate "MaxSonar I2CXL family ultrasonic sensors" + depends on I2C + help + Say Y to build a driver for the ultrasonic sensors I2CXL of + MaxBotix which have an i2c interface. It can be used to measure + the distance of objects. Supported types are mb1202, mb1212, + mb1222, mb1232, mb1242, mb7040, mb7137 + + To compile this driver as a module, choose M here: the + module will be called mb1232. + +config PING + tristate "Parallax GPIO bitbanged ranger sensors" + depends on GPIOLIB + help + Say Y here to build a driver for GPIO bitbanged ranger sensors + with just one GPIO for the trigger and echo. This driver can be + used to measure the distance of objects. + + Actually supported are: + - Parallax PING))) (ultrasonic) + - Parallax LaserPING (time-of-flight) + + To compile this driver as a module, choose M here: the + module will be called ping. + +config RFD77402 + tristate "RFD77402 ToF sensor" + depends on I2C + help + Say Y to build a driver for the RFD77402 Time-of-Flight (distance) + sensor module with I2C interface. + + To compile this driver as a module, choose M here: the + module will be called rfd77402. + +config SRF04 + tristate "GPIO bitbanged ultrasonic ranger sensor (SRF04, MB1000)" + depends on GPIOLIB + help + Say Y here to build a driver for GPIO bitbanged ultrasonic + ranger sensor. This driver can be used to measure the distance + of objects. It is using two GPIOs. + Actually Supported types are: + - Devantech SRF04 + - Maxbotix mb1000 + - Maxbotix mb1010 + - Maxbotix mb1020 + - Maxbotix mb1030 + - Maxbotix mb1040 + + To compile this driver as a module, choose M here: the + module will be called srf04. + +config SX_COMMON + tristate + help + Common Semtech proximity sensor code. + +config SX9310 + tristate "SX9310/SX9311 Semtech proximity sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + select SX_COMMON + depends on I2C + help + Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive + proximity/button sensor. + + To compile this driver as a module, choose M here: the + module will be called sx9310. + +config SX9324 + tristate "SX9324 Semtech proximity sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + select SX_COMMON + depends on I2C + help + Say Y here to build a driver for Semtech's SX9324 + proximity/button sensor. + + To compile this driver as a module, choose M here: the + module will be called sx9324. + +config SX9360 + tristate "SX9360 Semtech proximity sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + select SX_COMMON + depends on I2C + help + Say Y here to build a driver for Semtech's SX9360 + proximity/button sensor, a simplified SX9324. + + To compile this driver as a module, choose M here: the + module will be called sx9360. + +config SX9500 + tristate "SX9500 Semtech proximity sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + depends on I2C + help + Say Y here to build a driver for Semtech's SX9500 capacitive + proximity/button sensor. + + To compile this driver as a module, choose M here: the + module will be called sx9500. + +config SRF08 + tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on I2C + help + Say Y here to build a driver for Devantech SRF02/SRF08/SRF10 + ultrasonic ranger sensors with i2c interface. + This driver can be used to measure the distance of objects. + + To compile this driver as a module, choose M here: the + module will be called srf08. + +config VCNL3020 + tristate "VCNL3020 proximity sensor" + select REGMAP_I2C + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VCNL3020 + proximity sensor. + + To compile this driver as a module, choose M here: the + module will be called vcnl3020. + +config VL53L0X_I2C + tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)" + depends on I2C + help + Say Y here to build a driver for STMicroelectronics VL53L0X + ToF ranger sensors with i2c interface. + This driver can be used to measure the distance of objects. + + To compile this driver as a module, choose M here: the + module will be called vl53l0x-i2c. + +endmenu |