diff options
Diffstat (limited to 'drivers/input/mouse/synaptics_i2c.c')
| -rw-r--r-- | drivers/input/mouse/synaptics_i2c.c | 665 |
1 files changed, 665 insertions, 0 deletions
diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c new file mode 100644 index 000000000..987ee67a1 --- /dev/null +++ b/drivers/input/mouse/synaptics_i2c.c @@ -0,0 +1,665 @@ +/* + * Synaptics touchpad with I2C interface + * + * Copyright (C) 2009 Compulab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * Igor Grinberg <grinberg@compulab.co.il> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/slab.h> +#include <linux/pm.h> + +#define DRIVER_NAME "synaptics_i2c" +/* maximum product id is 15 characters */ +#define PRODUCT_ID_LENGTH 15 +#define REGISTER_LENGTH 8 + +/* + * after soft reset, we should wait for 1 ms + * before the device becomes operational + */ +#define SOFT_RESET_DELAY_US 3000 +/* and after hard reset, we should wait for max 500ms */ +#define HARD_RESET_DELAY_MS 500 + +/* Registers by SMBus address */ +#define PAGE_SEL_REG 0xff +#define DEVICE_STATUS_REG 0x09 + +/* Registers by RMI address */ +#define DEV_CONTROL_REG 0x0000 +#define INTERRUPT_EN_REG 0x0001 +#define ERR_STAT_REG 0x0002 +#define INT_REQ_STAT_REG 0x0003 +#define DEV_COMMAND_REG 0x0004 + +#define RMI_PROT_VER_REG 0x0200 +#define MANUFACT_ID_REG 0x0201 +#define PHYS_INT_VER_REG 0x0202 +#define PROD_PROPERTY_REG 0x0203 +#define INFO_QUERY_REG0 0x0204 +#define INFO_QUERY_REG1 (INFO_QUERY_REG0 + 1) +#define INFO_QUERY_REG2 (INFO_QUERY_REG0 + 2) +#define INFO_QUERY_REG3 (INFO_QUERY_REG0 + 3) + +#define PRODUCT_ID_REG0 0x0210 +#define PRODUCT_ID_REG1 (PRODUCT_ID_REG0 + 1) +#define PRODUCT_ID_REG2 (PRODUCT_ID_REG0 + 2) +#define PRODUCT_ID_REG3 (PRODUCT_ID_REG0 + 3) +#define PRODUCT_ID_REG4 (PRODUCT_ID_REG0 + 4) +#define PRODUCT_ID_REG5 (PRODUCT_ID_REG0 + 5) +#define PRODUCT_ID_REG6 (PRODUCT_ID_REG0 + 6) +#define PRODUCT_ID_REG7 (PRODUCT_ID_REG0 + 7) +#define PRODUCT_ID_REG8 (PRODUCT_ID_REG0 + 8) +#define PRODUCT_ID_REG9 (PRODUCT_ID_REG0 + 9) +#define PRODUCT_ID_REG10 (PRODUCT_ID_REG0 + 10) +#define PRODUCT_ID_REG11 (PRODUCT_ID_REG0 + 11) +#define PRODUCT_ID_REG12 (PRODUCT_ID_REG0 + 12) +#define PRODUCT_ID_REG13 (PRODUCT_ID_REG0 + 13) +#define PRODUCT_ID_REG14 (PRODUCT_ID_REG0 + 14) +#define PRODUCT_ID_REG15 (PRODUCT_ID_REG0 + 15) + +#define DATA_REG0 0x0400 +#define ABS_PRESSURE_REG 0x0401 +#define ABS_MSB_X_REG 0x0402 +#define ABS_LSB_X_REG (ABS_MSB_X_REG + 1) +#define ABS_MSB_Y_REG 0x0404 +#define ABS_LSB_Y_REG (ABS_MSB_Y_REG + 1) +#define REL_X_REG 0x0406 +#define REL_Y_REG 0x0407 + +#define DEV_QUERY_REG0 0x1000 +#define DEV_QUERY_REG1 (DEV_QUERY_REG0 + 1) +#define DEV_QUERY_REG2 (DEV_QUERY_REG0 + 2) +#define DEV_QUERY_REG3 (DEV_QUERY_REG0 + 3) +#define DEV_QUERY_REG4 (DEV_QUERY_REG0 + 4) +#define DEV_QUERY_REG5 (DEV_QUERY_REG0 + 5) +#define DEV_QUERY_REG6 (DEV_QUERY_REG0 + 6) +#define DEV_QUERY_REG7 (DEV_QUERY_REG0 + 7) +#define DEV_QUERY_REG8 (DEV_QUERY_REG0 + 8) + +#define GENERAL_2D_CONTROL_REG 0x1041 +#define SENSOR_SENSITIVITY_REG 0x1044 +#define SENS_MAX_POS_MSB_REG 0x1046 +#define SENS_MAX_POS_LSB_REG (SENS_MAX_POS_UPPER_REG + 1) + +/* Register bits */ +/* Device Control Register Bits */ +#define REPORT_RATE_1ST_BIT 6 + +/* Interrupt Enable Register Bits (INTERRUPT_EN_REG) */ +#define F10_ABS_INT_ENA 0 +#define F10_REL_INT_ENA 1 +#define F20_INT_ENA 2 + +/* Interrupt Request Register Bits (INT_REQ_STAT_REG | DEVICE_STATUS_REG) */ +#define F10_ABS_INT_REQ 0 +#define F10_REL_INT_REQ 1 +#define F20_INT_REQ 2 +/* Device Status Register Bits (DEVICE_STATUS_REG) */ +#define STAT_CONFIGURED 6 +#define STAT_ERROR 7 + +/* Device Command Register Bits (DEV_COMMAND_REG) */ +#define RESET_COMMAND 0x01 +#define REZERO_COMMAND 0x02 + +/* Data Register 0 Bits (DATA_REG0) */ +#define GESTURE 3 + +/* Device Query Registers Bits */ +/* DEV_QUERY_REG3 */ +#define HAS_PALM_DETECT 1 +#define HAS_MULTI_FING 2 +#define HAS_SCROLLER 4 +#define HAS_2D_SCROLL 5 + +/* General 2D Control Register Bits (GENERAL_2D_CONTROL_REG) */ +#define NO_DECELERATION 1 +#define REDUCE_REPORTING 3 +#define NO_FILTER 5 + +/* Function Masks */ +/* Device Control Register Masks (DEV_CONTROL_REG) */ +#define REPORT_RATE_MSK 0xc0 +#define SLEEP_MODE_MSK 0x07 + +/* Device Sleep Modes */ +#define FULL_AWAKE 0x0 +#define NORMAL_OP 0x1 +#define LOW_PWR_OP 0x2 +#define VERY_LOW_PWR_OP 0x3 +#define SENS_SLEEP 0x4 +#define SLEEP_MOD 0x5 +#define DEEP_SLEEP 0x6 +#define HIBERNATE 0x7 + +/* Interrupt Register Mask */ +/* (INT_REQ_STAT_REG | DEVICE_STATUS_REG | INTERRUPT_EN_REG) */ +#define INT_ENA_REQ_MSK 0x07 +#define INT_ENA_ABS_MSK 0x01 +#define INT_ENA_REL_MSK 0x02 +#define INT_ENA_F20_MSK 0x04 + +/* Device Status Register Masks (DEVICE_STATUS_REG) */ +#define CONFIGURED_MSK 0x40 +#define ERROR_MSK 0x80 + +/* Data Register 0 Masks */ +#define FINGER_WIDTH_MSK 0xf0 +#define GESTURE_MSK 0x08 +#define SENSOR_STATUS_MSK 0x07 + +/* + * MSB Position Register Masks + * ABS_MSB_X_REG | ABS_MSB_Y_REG | SENS_MAX_POS_MSB_REG | + * DEV_QUERY_REG3 | DEV_QUERY_REG5 + */ +#define MSB_POSITION_MSK 0x1f + +/* Device Query Registers Masks */ + +/* DEV_QUERY_REG2 */ +#define NUM_EXTRA_POS_MSK 0x07 + +/* When in IRQ mode read the device every THREAD_IRQ_SLEEP_SECS */ +#define THREAD_IRQ_SLEEP_SECS 2 +#define THREAD_IRQ_SLEEP_MSECS (THREAD_IRQ_SLEEP_SECS * MSEC_PER_SEC) + +/* + * When in Polling mode and no data received for NO_DATA_THRES msecs + * reduce the polling rate to NO_DATA_SLEEP_MSECS + */ +#define NO_DATA_THRES (MSEC_PER_SEC) +#define NO_DATA_SLEEP_MSECS (MSEC_PER_SEC / 4) + +/* Control touchpad's No Deceleration option */ +static bool no_decel = true; +module_param(no_decel, bool, 0644); +MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)"); + +/* Control touchpad's Reduced Reporting option */ +static bool reduce_report; +module_param(reduce_report, bool, 0644); +MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)"); + +/* Control touchpad's No Filter option */ +static bool no_filter; +module_param(no_filter, bool, 0644); +MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)"); + +/* + * touchpad Attention line is Active Low and Open Drain, + * therefore should be connected to pulled up line + * and the irq configuration should be set to Falling Edge Trigger + */ +/* Control IRQ / Polling option */ +static bool polling_req; +module_param(polling_req, bool, 0444); +MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)"); + +/* Control Polling Rate */ +static int scan_rate = 80; +module_param(scan_rate, int, 0644); +MODULE_PARM_DESC(scan_rate, "Polling rate in times/sec. Default = 80"); + +/* The main device structure */ +struct synaptics_i2c { + struct i2c_client *client; + struct input_dev *input; + struct delayed_work dwork; + int no_data_count; + int no_decel_param; + int reduce_report_param; + int no_filter_param; + int scan_rate_param; + int scan_ms; +}; + +static inline void set_scan_rate(struct synaptics_i2c *touch, int scan_rate) +{ + touch->scan_ms = MSEC_PER_SEC / scan_rate; + touch->scan_rate_param = scan_rate; +} + +/* + * Driver's initial design makes no race condition possible on i2c bus, + * so there is no need in any locking. + * Keep it in mind, while playing with the code. + */ +static s32 synaptics_i2c_reg_get(struct i2c_client *client, u16 reg) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8); + if (ret == 0) + ret = i2c_smbus_read_byte_data(client, reg & 0xff); + + return ret; +} + +static s32 synaptics_i2c_reg_set(struct i2c_client *client, u16 reg, u8 val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8); + if (ret == 0) + ret = i2c_smbus_write_byte_data(client, reg & 0xff, val); + + return ret; +} + +static s32 synaptics_i2c_word_get(struct i2c_client *client, u16 reg) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8); + if (ret == 0) + ret = i2c_smbus_read_word_data(client, reg & 0xff); + + return ret; +} + +static int synaptics_i2c_config(struct i2c_client *client) +{ + int ret, control; + u8 int_en; + + /* set Report Rate to Device Highest (>=80) and Sleep to normal */ + ret = synaptics_i2c_reg_set(client, DEV_CONTROL_REG, 0xc1); + if (ret) + return ret; + + /* set Interrupt Disable to Func20 / Enable to Func10) */ + int_en = (polling_req) ? 0 : INT_ENA_ABS_MSK | INT_ENA_REL_MSK; + ret = synaptics_i2c_reg_set(client, INTERRUPT_EN_REG, int_en); + if (ret) + return ret; + + control = synaptics_i2c_reg_get(client, GENERAL_2D_CONTROL_REG); + /* No Deceleration */ + control |= no_decel ? 1 << NO_DECELERATION : 0; + /* Reduced Reporting */ + control |= reduce_report ? 1 << REDUCE_REPORTING : 0; + /* No Filter */ + control |= no_filter ? 1 << NO_FILTER : 0; + ret = synaptics_i2c_reg_set(client, GENERAL_2D_CONTROL_REG, control); + if (ret) + return ret; + + return 0; +} + +static int synaptics_i2c_reset_config(struct i2c_client *client) +{ + int ret; + + /* Reset the Touchpad */ + ret = synaptics_i2c_reg_set(client, DEV_COMMAND_REG, RESET_COMMAND); + if (ret) { + dev_err(&client->dev, "Unable to reset device\n"); + } else { + usleep_range(SOFT_RESET_DELAY_US, SOFT_RESET_DELAY_US + 100); + ret = synaptics_i2c_config(client); + if (ret) + dev_err(&client->dev, "Unable to config device\n"); + } + + return ret; +} + +static int synaptics_i2c_check_error(struct i2c_client *client) +{ + int status, ret = 0; + + status = i2c_smbus_read_byte_data(client, DEVICE_STATUS_REG) & + (CONFIGURED_MSK | ERROR_MSK); + + if (status != CONFIGURED_MSK) + ret = synaptics_i2c_reset_config(client); + + return ret; +} + +static bool synaptics_i2c_get_input(struct synaptics_i2c *touch) +{ + struct input_dev *input = touch->input; + int xy_delta, gesture; + s32 data; + s8 x_delta, y_delta; + + /* Deal with spontaneous resets and errors */ + if (synaptics_i2c_check_error(touch->client)) + return false; + + /* Get Gesture Bit */ + data = synaptics_i2c_reg_get(touch->client, DATA_REG0); + gesture = (data >> GESTURE) & 0x1; + + /* + * Get Relative axes. we have to get them in one shot, + * so we get 2 bytes starting from REL_X_REG. + */ + xy_delta = synaptics_i2c_word_get(touch->client, REL_X_REG) & 0xffff; + + /* Separate X from Y */ + x_delta = xy_delta & 0xff; + y_delta = (xy_delta >> REGISTER_LENGTH) & 0xff; + + /* Report the button event */ + input_report_key(input, BTN_LEFT, gesture); + + /* Report the deltas */ + input_report_rel(input, REL_X, x_delta); + input_report_rel(input, REL_Y, -y_delta); + input_sync(input); + + return xy_delta || gesture; +} + +static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id) +{ + struct synaptics_i2c *touch = dev_id; + + mod_delayed_work(system_wq, &touch->dwork, 0); + + return IRQ_HANDLED; +} + +static void synaptics_i2c_check_params(struct synaptics_i2c *touch) +{ + bool reset = false; + + if (scan_rate != touch->scan_rate_param) + set_scan_rate(touch, scan_rate); + + if (no_decel != touch->no_decel_param) { + touch->no_decel_param = no_decel; + reset = true; + } + + if (no_filter != touch->no_filter_param) { + touch->no_filter_param = no_filter; + reset = true; + } + + if (reduce_report != touch->reduce_report_param) { + touch->reduce_report_param = reduce_report; + reset = true; + } + + if (reset) + synaptics_i2c_reset_config(touch->client); +} + +/* Control the Device polling rate / Work Handler sleep time */ +static unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch, + bool have_data) +{ + unsigned long delay, nodata_count_thres; + + if (polling_req) { + delay = touch->scan_ms; + if (have_data) { + touch->no_data_count = 0; + } else { + nodata_count_thres = NO_DATA_THRES / touch->scan_ms; + if (touch->no_data_count < nodata_count_thres) + touch->no_data_count++; + else + delay = NO_DATA_SLEEP_MSECS; + } + return msecs_to_jiffies(delay); + } else { + delay = msecs_to_jiffies(THREAD_IRQ_SLEEP_MSECS); + return round_jiffies_relative(delay); + } +} + +/* Work Handler */ +static void synaptics_i2c_work_handler(struct work_struct *work) +{ + bool have_data; + struct synaptics_i2c *touch = + container_of(work, struct synaptics_i2c, dwork.work); + unsigned long delay; + + synaptics_i2c_check_params(touch); + + have_data = synaptics_i2c_get_input(touch); + delay = synaptics_i2c_adjust_delay(touch, have_data); + + /* + * While interrupt driven, there is no real need to poll the device. + * But touchpads are very sensitive, so there could be errors + * related to physical environment and the attention line isn't + * necessarily asserted. In such case we can lose the touchpad. + * We poll the device once in THREAD_IRQ_SLEEP_SECS and + * if error is detected, we try to reset and reconfigure the touchpad. + */ + mod_delayed_work(system_wq, &touch->dwork, delay); +} + +static int synaptics_i2c_open(struct input_dev *input) +{ + struct synaptics_i2c *touch = input_get_drvdata(input); + int ret; + + ret = synaptics_i2c_reset_config(touch->client); + if (ret) + return ret; + + if (polling_req) + mod_delayed_work(system_wq, &touch->dwork, + msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); + + return 0; +} + +static void synaptics_i2c_close(struct input_dev *input) +{ + struct synaptics_i2c *touch = input_get_drvdata(input); + + if (!polling_req) + synaptics_i2c_reg_set(touch->client, INTERRUPT_EN_REG, 0); + + cancel_delayed_work_sync(&touch->dwork); + + /* Save some power */ + synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP); +} + +static void synaptics_i2c_set_input_params(struct synaptics_i2c *touch) +{ + struct input_dev *input = touch->input; + + input->name = touch->client->name; + input->phys = touch->client->adapter->name; + input->id.bustype = BUS_I2C; + input->id.version = synaptics_i2c_word_get(touch->client, + INFO_QUERY_REG0); + input->dev.parent = &touch->client->dev; + input->open = synaptics_i2c_open; + input->close = synaptics_i2c_close; + input_set_drvdata(input, touch); + + /* Register the device as mouse */ + __set_bit(EV_REL, input->evbit); + __set_bit(REL_X, input->relbit); + __set_bit(REL_Y, input->relbit); + + /* Register device's buttons and keys */ + __set_bit(EV_KEY, input->evbit); + __set_bit(BTN_LEFT, input->keybit); +} + +static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client) +{ + struct synaptics_i2c *touch; + + touch = kzalloc(sizeof(struct synaptics_i2c), GFP_KERNEL); + if (!touch) + return NULL; + + touch->client = client; + touch->no_decel_param = no_decel; + touch->scan_rate_param = scan_rate; + set_scan_rate(touch, scan_rate); + INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler); + + return touch; +} + +static int synaptics_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int ret; + struct synaptics_i2c *touch; + + touch = synaptics_i2c_touch_create(client); + if (!touch) + return -ENOMEM; + + ret = synaptics_i2c_reset_config(client); + if (ret) + goto err_mem_free; + + if (client->irq < 1) + polling_req = true; + + touch->input = input_allocate_device(); + if (!touch->input) { + ret = -ENOMEM; + goto err_mem_free; + } + + synaptics_i2c_set_input_params(touch); + + if (!polling_req) { + dev_dbg(&touch->client->dev, + "Requesting IRQ: %d\n", touch->client->irq); + + ret = request_irq(touch->client->irq, synaptics_i2c_irq, + IRQ_TYPE_EDGE_FALLING, + DRIVER_NAME, touch); + if (ret) { + dev_warn(&touch->client->dev, + "IRQ request failed: %d, " + "falling back to polling\n", ret); + polling_req = true; + synaptics_i2c_reg_set(touch->client, + INTERRUPT_EN_REG, 0); + } + } + + if (polling_req) + dev_dbg(&touch->client->dev, + "Using polling at rate: %d times/sec\n", scan_rate); + + /* Register the device in input subsystem */ + ret = input_register_device(touch->input); + if (ret) { + dev_err(&client->dev, + "Input device register failed: %d\n", ret); + goto err_input_free; + } + + i2c_set_clientdata(client, touch); + + return 0; + +err_input_free: + input_free_device(touch->input); +err_mem_free: + kfree(touch); + + return ret; +} + +static void synaptics_i2c_remove(struct i2c_client *client) +{ + struct synaptics_i2c *touch = i2c_get_clientdata(client); + + if (!polling_req) + free_irq(client->irq, touch); + + input_unregister_device(touch->input); + kfree(touch); +} + +static int __maybe_unused synaptics_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct synaptics_i2c *touch = i2c_get_clientdata(client); + + cancel_delayed_work_sync(&touch->dwork); + + /* Save some power */ + synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP); + + return 0; +} + +static int __maybe_unused synaptics_i2c_resume(struct device *dev) +{ + int ret; + struct i2c_client *client = to_i2c_client(dev); + struct synaptics_i2c *touch = i2c_get_clientdata(client); + + ret = synaptics_i2c_reset_config(client); + if (ret) + return ret; + + mod_delayed_work(system_wq, &touch->dwork, + msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(synaptics_i2c_pm, synaptics_i2c_suspend, + synaptics_i2c_resume); + +static const struct i2c_device_id synaptics_i2c_id_table[] = { + { "synaptics_i2c", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, synaptics_i2c_id_table); + +#ifdef CONFIG_OF +static const struct of_device_id synaptics_i2c_of_match[] = { + { .compatible = "synaptics,synaptics_i2c", }, + { }, +}; +MODULE_DEVICE_TABLE(of, synaptics_i2c_of_match); +#endif + +static struct i2c_driver synaptics_i2c_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = of_match_ptr(synaptics_i2c_of_match), + .pm = &synaptics_i2c_pm, + }, + + .probe = synaptics_i2c_probe, + .remove = synaptics_i2c_remove, + + .id_table = synaptics_i2c_id_table, +}; + +module_i2c_driver(synaptics_i2c_driver); + +MODULE_DESCRIPTION("Synaptics I2C touchpad driver"); +MODULE_AUTHOR("Mike Rapoport, Igor Grinberg, Compulab"); +MODULE_LICENSE("GPL"); + |