summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb-frontends/drx39xyj/drx_driver.h')
-rw-r--r--drivers/media/dvb-frontends/drx39xyj/drx_driver.h2328
1 files changed, 2328 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
new file mode 100644
index 000000000..15f7e58c5
--- /dev/null
+++ b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
@@ -0,0 +1,2328 @@
+/*
+ Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the name of Trident Microsystems nor Hauppauge Computer Works
+ nor the names of its contributors may be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef __DRXDRIVER_H__
+#define __DRXDRIVER_H__
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+
+/*
+ * This structure contains the I2C address, the device ID and a user_data pointer.
+ * The user_data pointer can be used for application specific purposes.
+ */
+struct i2c_device_addr {
+ u16 i2c_addr; /* The I2C address of the device. */
+ u16 i2c_dev_id; /* The device identifier. */
+ void *user_data; /* User data pointer */
+};
+
+/*
+* \def IS_I2C_10BIT( addr )
+* \brief Determine if I2C address 'addr' is a 10 bits address or not.
+* \param addr The I2C address.
+* \return int.
+* \retval 0 if address is not a 10 bits I2C address.
+* \retval 1 if address is a 10 bits I2C address.
+*/
+#define IS_I2C_10BIT(addr) \
+ (((addr) & 0xF8) == 0xF0)
+
+/*------------------------------------------------------------------------------
+Exported FUNCTIONS
+------------------------------------------------------------------------------*/
+
+/*
+* \fn drxbsp_i2c_init()
+* \brief Initialize I2C communication module.
+* \return int Return status.
+* \retval 0 Initialization successful.
+* \retval -EIO Initialization failed.
+*/
+int drxbsp_i2c_init(void);
+
+/*
+* \fn drxbsp_i2c_term()
+* \brief Terminate I2C communication module.
+* \return int Return status.
+* \retval 0 Termination successful.
+* \retval -EIO Termination failed.
+*/
+int drxbsp_i2c_term(void);
+
+/*
+* \fn int drxbsp_i2c_write_read( struct i2c_device_addr *w_dev_addr,
+* u16 w_count,
+* u8 * wData,
+* struct i2c_device_addr *r_dev_addr,
+* u16 r_count,
+* u8 * r_data)
+* \brief Read and/or write count bytes from I2C bus, store them in data[].
+* \param w_dev_addr The device i2c address and the device ID to write to
+* \param w_count The number of bytes to write
+* \param wData The array to write the data to
+* \param r_dev_addr The device i2c address and the device ID to read from
+* \param r_count The number of bytes to read
+* \param r_data The array to read the data from
+* \return int Return status.
+* \retval 0 Success.
+* \retval -EIO Failure.
+* \retval -EINVAL Parameter 'wcount' is not zero but parameter
+* 'wdata' contains NULL.
+* Idem for 'rcount' and 'rdata'.
+* Both w_dev_addr and r_dev_addr are NULL.
+*
+* This function must implement an atomic write and/or read action on the I2C bus
+* No other process may use the I2C bus when this function is executing.
+* The critical section of this function runs from and including the I2C
+* write, up to and including the I2C read action.
+*
+* The device ID can be useful if several devices share an I2C address.
+* It can be used to control a "switch" on the I2C bus to the correct device.
+*/
+int drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr,
+ u16 w_count,
+ u8 *wData,
+ struct i2c_device_addr *r_dev_addr,
+ u16 r_count, u8 *r_data);
+
+/*
+* \fn drxbsp_i2c_error_text()
+* \brief Returns a human readable error.
+* Counter part of numerical drx_i2c_error_g.
+*
+* \return char* Pointer to human readable error text.
+*/
+char *drxbsp_i2c_error_text(void);
+
+/*
+* \var drx_i2c_error_g;
+* \brief I2C specific error codes, platform dependent.
+*/
+extern int drx_i2c_error_g;
+
+#define TUNER_MODE_SUB0 0x0001 /* for sub-mode (e.g. RF-AGC setting) */
+#define TUNER_MODE_SUB1 0x0002 /* for sub-mode (e.g. RF-AGC setting) */
+#define TUNER_MODE_SUB2 0x0004 /* for sub-mode (e.g. RF-AGC setting) */
+#define TUNER_MODE_SUB3 0x0008 /* for sub-mode (e.g. RF-AGC setting) */
+#define TUNER_MODE_SUB4 0x0010 /* for sub-mode (e.g. RF-AGC setting) */
+#define TUNER_MODE_SUB5 0x0020 /* for sub-mode (e.g. RF-AGC setting) */
+#define TUNER_MODE_SUB6 0x0040 /* for sub-mode (e.g. RF-AGC setting) */
+#define TUNER_MODE_SUB7 0x0080 /* for sub-mode (e.g. RF-AGC setting) */
+
+#define TUNER_MODE_DIGITAL 0x0100 /* for digital channel (e.g. DVB-T) */
+#define TUNER_MODE_ANALOG 0x0200 /* for analog channel (e.g. PAL) */
+#define TUNER_MODE_SWITCH 0x0400 /* during channel switch & scanning */
+#define TUNER_MODE_LOCK 0x0800 /* after tuner has locked */
+#define TUNER_MODE_6MHZ 0x1000 /* for 6MHz bandwidth channels */
+#define TUNER_MODE_7MHZ 0x2000 /* for 7MHz bandwidth channels */
+#define TUNER_MODE_8MHZ 0x4000 /* for 8MHz bandwidth channels */
+
+#define TUNER_MODE_SUB_MAX 8
+#define TUNER_MODE_SUBALL (TUNER_MODE_SUB0 | TUNER_MODE_SUB1 | \
+ TUNER_MODE_SUB2 | TUNER_MODE_SUB3 | \
+ TUNER_MODE_SUB4 | TUNER_MODE_SUB5 | \
+ TUNER_MODE_SUB6 | TUNER_MODE_SUB7)
+
+
+enum tuner_lock_status {
+ TUNER_LOCKED,
+ TUNER_NOT_LOCKED
+};
+
+struct tuner_common {
+ char *name; /* Tuner brand & type name */
+ s32 min_freq_rf; /* Lowest RF input frequency, in kHz */
+ s32 max_freq_rf; /* Highest RF input frequency, in kHz */
+
+ u8 sub_mode; /* Index to sub-mode in use */
+ char ***sub_mode_descriptions; /* Pointer to description of sub-modes */
+ u8 sub_modes; /* Number of available sub-modes */
+
+ /* The following fields will be either 0, NULL or false and do not need
+ initialisation */
+ void *self_check; /* gives proof of initialization */
+ bool programmed; /* only valid if self_check is OK */
+ s32 r_ffrequency; /* only valid if programmed */
+ s32 i_ffrequency; /* only valid if programmed */
+
+ void *my_user_data; /* pointer to associated demod instance */
+ u16 my_capabilities; /* value for storing application flags */
+};
+
+struct tuner_instance;
+
+typedef int(*tuner_open_func_t) (struct tuner_instance *tuner);
+typedef int(*tuner_close_func_t) (struct tuner_instance *tuner);
+
+typedef int(*tuner_set_frequency_func_t) (struct tuner_instance *tuner,
+ u32 mode,
+ s32
+ frequency);
+
+typedef int(*tuner_get_frequency_func_t) (struct tuner_instance *tuner,
+ u32 mode,
+ s32 *
+ r_ffrequency,
+ s32 *
+ i_ffrequency);
+
+typedef int(*tuner_lock_status_func_t) (struct tuner_instance *tuner,
+ enum tuner_lock_status *
+ lock_stat);
+
+typedef int(*tune_ri2c_write_read_func_t) (struct tuner_instance *tuner,
+ struct i2c_device_addr *
+ w_dev_addr, u16 w_count,
+ u8 *wData,
+ struct i2c_device_addr *
+ r_dev_addr, u16 r_count,
+ u8 *r_data);
+
+struct tuner_ops {
+ tuner_open_func_t open_func;
+ tuner_close_func_t close_func;
+ tuner_set_frequency_func_t set_frequency_func;
+ tuner_get_frequency_func_t get_frequency_func;
+ tuner_lock_status_func_t lock_status_func;
+ tune_ri2c_write_read_func_t i2c_write_read_func;
+
+};
+
+struct tuner_instance {
+ struct i2c_device_addr my_i2c_dev_addr;
+ struct tuner_common *my_common_attr;
+ void *my_ext_attr;
+ struct tuner_ops *my_funct;
+};
+
+int drxbsp_tuner_set_frequency(struct tuner_instance *tuner,
+ u32 mode,
+ s32 frequency);
+
+int drxbsp_tuner_get_frequency(struct tuner_instance *tuner,
+ u32 mode,
+ s32 *r_ffrequency,
+ s32 *i_ffrequency);
+
+int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner,
+ struct i2c_device_addr *w_dev_addr,
+ u16 w_count,
+ u8 *wData,
+ struct i2c_device_addr *r_dev_addr,
+ u16 r_count, u8 *r_data);
+
+/*************
+*
+* This section configures the DRX Data Access Protocols (DAPs).
+*
+**************/
+
+/*
+* \def DRXDAP_SINGLE_MASTER
+* \brief Enable I2C single or I2C multimaster mode on host.
+*
+* Set to 1 to enable single master mode
+* Set to 0 to enable multi master mode
+*
+* The actual DAP implementation may be restricted to only one of the modes.
+* A compiler warning or error will be generated if the DAP implementation
+* overrides or cannot handle the mode defined below.
+*/
+#ifndef DRXDAP_SINGLE_MASTER
+#define DRXDAP_SINGLE_MASTER 1
+#endif
+
+/*
+* \def DRXDAP_MAX_WCHUNKSIZE
+* \brief Defines maximum chunksize of an i2c write action by host.
+*
+* This indicates the maximum size of data the I2C device driver is able to
+* write at a time. This includes I2C device address and register addressing.
+*
+* This maximum size may be restricted by the actual DAP implementation.
+* A compiler warning or error will be generated if the DAP implementation
+* overrides or cannot handle the chunksize defined below.
+*
+* Beware that the DAP uses DRXDAP_MAX_WCHUNKSIZE to create a temporary data
+* buffer. Do not undefine or choose too large, unless your system is able to
+* handle a stack buffer of that size.
+*
+*/
+#ifndef DRXDAP_MAX_WCHUNKSIZE
+#define DRXDAP_MAX_WCHUNKSIZE 60
+#endif
+
+/*
+* \def DRXDAP_MAX_RCHUNKSIZE
+* \brief Defines maximum chunksize of an i2c read action by host.
+*
+* This indicates the maximum size of data the I2C device driver is able to read
+* at a time. Minimum value is 2. Also, the read chunk size must be even.
+*
+* This maximum size may be restricted by the actual DAP implementation.
+* A compiler warning or error will be generated if the DAP implementation
+* overrides or cannot handle the chunksize defined below.
+*/
+#ifndef DRXDAP_MAX_RCHUNKSIZE
+#define DRXDAP_MAX_RCHUNKSIZE 60
+#endif
+
+/*************
+*
+* This section describes drxdriver defines.
+*
+**************/
+
+/*
+* \def DRX_UNKNOWN
+* \brief Generic UNKNOWN value for DRX enumerated types.
+*
+* Used to indicate that the parameter value is unknown or not yet initialized.
+*/
+#ifndef DRX_UNKNOWN
+#define DRX_UNKNOWN (254)
+#endif
+
+/*
+* \def DRX_AUTO
+* \brief Generic AUTO value for DRX enumerated types.
+*
+* Used to instruct the driver to automatically determine the value of the
+* parameter.
+*/
+#ifndef DRX_AUTO
+#define DRX_AUTO (255)
+#endif
+
+/*************
+*
+* This section describes flag definitions for the device capbilities.
+*
+**************/
+
+/*
+* \brief LNA capability flag
+*
+* Device has a Low Noise Amplifier
+*
+*/
+#define DRX_CAPABILITY_HAS_LNA (1UL << 0)
+/*
+* \brief OOB-RX capability flag
+*
+* Device has OOB-RX
+*
+*/
+#define DRX_CAPABILITY_HAS_OOBRX (1UL << 1)
+/*
+* \brief ATV capability flag
+*
+* Device has ATV
+*
+*/
+#define DRX_CAPABILITY_HAS_ATV (1UL << 2)
+/*
+* \brief DVB-T capability flag
+*
+* Device has DVB-T
+*
+*/
+#define DRX_CAPABILITY_HAS_DVBT (1UL << 3)
+/*
+* \brief ITU-B capability flag
+*
+* Device has ITU-B
+*
+*/
+#define DRX_CAPABILITY_HAS_ITUB (1UL << 4)
+/*
+* \brief Audio capability flag
+*
+* Device has Audio
+*
+*/
+#define DRX_CAPABILITY_HAS_AUD (1UL << 5)
+/*
+* \brief SAW switch capability flag
+*
+* Device has SAW switch
+*
+*/
+#define DRX_CAPABILITY_HAS_SAWSW (1UL << 6)
+/*
+* \brief GPIO1 capability flag
+*
+* Device has GPIO1
+*
+*/
+#define DRX_CAPABILITY_HAS_GPIO1 (1UL << 7)
+/*
+* \brief GPIO2 capability flag
+*
+* Device has GPIO2
+*
+*/
+#define DRX_CAPABILITY_HAS_GPIO2 (1UL << 8)
+/*
+* \brief IRQN capability flag
+*
+* Device has IRQN
+*
+*/
+#define DRX_CAPABILITY_HAS_IRQN (1UL << 9)
+/*
+* \brief 8VSB capability flag
+*
+* Device has 8VSB
+*
+*/
+#define DRX_CAPABILITY_HAS_8VSB (1UL << 10)
+/*
+* \brief SMA-TX capability flag
+*
+* Device has SMATX
+*
+*/
+#define DRX_CAPABILITY_HAS_SMATX (1UL << 11)
+/*
+* \brief SMA-RX capability flag
+*
+* Device has SMARX
+*
+*/
+#define DRX_CAPABILITY_HAS_SMARX (1UL << 12)
+/*
+* \brief ITU-A/C capability flag
+*
+* Device has ITU-A/C
+*
+*/
+#define DRX_CAPABILITY_HAS_ITUAC (1UL << 13)
+
+/*-------------------------------------------------------------------------
+MACROS
+-------------------------------------------------------------------------*/
+/* Macros to stringify the version number */
+#define DRX_VERSIONSTRING(MAJOR, MINOR, PATCH) \
+ DRX_VERSIONSTRING_HELP(MAJOR)"." \
+ DRX_VERSIONSTRING_HELP(MINOR)"." \
+ DRX_VERSIONSTRING_HELP(PATCH)
+#define DRX_VERSIONSTRING_HELP(NUM) #NUM
+
+/*
+* \brief Macro to create byte array elements from 16 bit integers.
+* This macro is used to create byte arrays for block writes.
+* Block writes speed up I2C traffic between host and demod.
+* The macro takes care of the required byte order in a 16 bits word.
+* x->lowbyte(x), highbyte(x)
+*/
+#define DRX_16TO8(x) ((u8) (((u16)x) & 0xFF)), \
+ ((u8)((((u16)x)>>8)&0xFF))
+
+/*
+* \brief Macro to convert 16 bit register value to a s32
+*/
+#define DRX_U16TODRXFREQ(x) ((x & 0x8000) ? \
+ ((s32) \
+ (((u32) x) | 0xFFFF0000)) : \
+ ((s32) x))
+
+/*-------------------------------------------------------------------------
+ENUM
+-------------------------------------------------------------------------*/
+
+/*
+* \enum enum drx_standard
+* \brief Modulation standards.
+*/
+enum drx_standard {
+ DRX_STANDARD_DVBT = 0, /*< Terrestrial DVB-T. */
+ DRX_STANDARD_8VSB, /*< Terrestrial 8VSB. */
+ DRX_STANDARD_NTSC, /*< Terrestrial\Cable analog NTSC. */
+ DRX_STANDARD_PAL_SECAM_BG,
+ /*< Terrestrial analog PAL/SECAM B/G */
+ DRX_STANDARD_PAL_SECAM_DK,
+ /*< Terrestrial analog PAL/SECAM D/K */
+ DRX_STANDARD_PAL_SECAM_I,
+ /*< Terrestrial analog PAL/SECAM I */
+ DRX_STANDARD_PAL_SECAM_L,
+ /*< Terrestrial analog PAL/SECAM L
+ with negative modulation */
+ DRX_STANDARD_PAL_SECAM_LP,
+ /*< Terrestrial analog PAL/SECAM L
+ with positive modulation */
+ DRX_STANDARD_ITU_A, /*< Cable ITU ANNEX A. */
+ DRX_STANDARD_ITU_B, /*< Cable ITU ANNEX B. */
+ DRX_STANDARD_ITU_C, /*< Cable ITU ANNEX C. */
+ DRX_STANDARD_ITU_D, /*< Cable ITU ANNEX D. */
+ DRX_STANDARD_FM, /*< Terrestrial\Cable FM radio */
+ DRX_STANDARD_DTMB, /*< Terrestrial DTMB standard (China)*/
+ DRX_STANDARD_UNKNOWN = DRX_UNKNOWN,
+ /*< Standard unknown. */
+ DRX_STANDARD_AUTO = DRX_AUTO
+ /*< Autodetect standard. */
+};
+
+/*
+* \enum enum drx_standard
+* \brief Modulation sub-standards.
+*/
+enum drx_substandard {
+ DRX_SUBSTANDARD_MAIN = 0, /*< Main subvariant of standard */
+ DRX_SUBSTANDARD_ATV_BG_SCANDINAVIA,
+ DRX_SUBSTANDARD_ATV_DK_POLAND,
+ DRX_SUBSTANDARD_ATV_DK_CHINA,
+ DRX_SUBSTANDARD_UNKNOWN = DRX_UNKNOWN,
+ /*< Sub-standard unknown. */
+ DRX_SUBSTANDARD_AUTO = DRX_AUTO
+ /*< Auto (default) sub-standard */
+};
+
+/*
+* \enum enum drx_bandwidth
+* \brief Channel bandwidth or channel spacing.
+*/
+enum drx_bandwidth {
+ DRX_BANDWIDTH_8MHZ = 0, /*< Bandwidth 8 MHz. */
+ DRX_BANDWIDTH_7MHZ, /*< Bandwidth 7 MHz. */
+ DRX_BANDWIDTH_6MHZ, /*< Bandwidth 6 MHz. */
+ DRX_BANDWIDTH_UNKNOWN = DRX_UNKNOWN,
+ /*< Bandwidth unknown. */
+ DRX_BANDWIDTH_AUTO = DRX_AUTO
+ /*< Auto Set Bandwidth */
+};
+
+/*
+* \enum enum drx_mirror
+* \brief Indicate if channel spectrum is mirrored or not.
+*/
+enum drx_mirror {
+ DRX_MIRROR_NO = 0, /*< Spectrum is not mirrored. */
+ DRX_MIRROR_YES, /*< Spectrum is mirrored. */
+ DRX_MIRROR_UNKNOWN = DRX_UNKNOWN,
+ /*< Unknown if spectrum is mirrored. */
+ DRX_MIRROR_AUTO = DRX_AUTO
+ /*< Autodetect if spectrum is mirrored. */
+};
+
+/*
+* \enum enum drx_modulation
+* \brief Constellation type of the channel.
+*/
+enum drx_modulation {
+ DRX_CONSTELLATION_BPSK = 0, /*< Modulation is BPSK. */
+ DRX_CONSTELLATION_QPSK, /*< Constellation is QPSK. */
+ DRX_CONSTELLATION_PSK8, /*< Constellation is PSK8. */
+ DRX_CONSTELLATION_QAM16, /*< Constellation is QAM16. */
+ DRX_CONSTELLATION_QAM32, /*< Constellation is QAM32. */
+ DRX_CONSTELLATION_QAM64, /*< Constellation is QAM64. */
+ DRX_CONSTELLATION_QAM128, /*< Constellation is QAM128. */
+ DRX_CONSTELLATION_QAM256, /*< Constellation is QAM256. */
+ DRX_CONSTELLATION_QAM512, /*< Constellation is QAM512. */
+ DRX_CONSTELLATION_QAM1024, /*< Constellation is QAM1024. */
+ DRX_CONSTELLATION_QPSK_NR, /*< Constellation is QPSK_NR */
+ DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN,
+ /*< Constellation unknown. */
+ DRX_CONSTELLATION_AUTO = DRX_AUTO
+ /*< Autodetect constellation. */
+};
+
+/*
+* \enum enum drx_hierarchy
+* \brief Hierarchy of the channel.
+*/
+enum drx_hierarchy {
+ DRX_HIERARCHY_NONE = 0, /*< None hierarchical channel. */
+ DRX_HIERARCHY_ALPHA1, /*< Hierarchical channel, alpha=1. */
+ DRX_HIERARCHY_ALPHA2, /*< Hierarchical channel, alpha=2. */
+ DRX_HIERARCHY_ALPHA4, /*< Hierarchical channel, alpha=4. */
+ DRX_HIERARCHY_UNKNOWN = DRX_UNKNOWN,
+ /*< Hierarchy unknown. */
+ DRX_HIERARCHY_AUTO = DRX_AUTO
+ /*< Autodetect hierarchy. */
+};
+
+/*
+* \enum enum drx_priority
+* \brief Channel priority in case of hierarchical transmission.
+*/
+enum drx_priority {
+ DRX_PRIORITY_LOW = 0, /*< Low priority channel. */
+ DRX_PRIORITY_HIGH, /*< High priority channel. */
+ DRX_PRIORITY_UNKNOWN = DRX_UNKNOWN
+ /*< Priority unknown. */
+};
+
+/*
+* \enum enum drx_coderate
+* \brief Channel priority in case of hierarchical transmission.
+*/
+enum drx_coderate {
+ DRX_CODERATE_1DIV2 = 0, /*< Code rate 1/2nd. */
+ DRX_CODERATE_2DIV3, /*< Code rate 2/3nd. */
+ DRX_CODERATE_3DIV4, /*< Code rate 3/4nd. */
+ DRX_CODERATE_5DIV6, /*< Code rate 5/6nd. */
+ DRX_CODERATE_7DIV8, /*< Code rate 7/8nd. */
+ DRX_CODERATE_UNKNOWN = DRX_UNKNOWN,
+ /*< Code rate unknown. */
+ DRX_CODERATE_AUTO = DRX_AUTO
+ /*< Autodetect code rate. */
+};
+
+/*
+* \enum enum drx_guard
+* \brief Guard interval of a channel.
+*/
+enum drx_guard {
+ DRX_GUARD_1DIV32 = 0, /*< Guard interval 1/32nd. */
+ DRX_GUARD_1DIV16, /*< Guard interval 1/16th. */
+ DRX_GUARD_1DIV8, /*< Guard interval 1/8th. */
+ DRX_GUARD_1DIV4, /*< Guard interval 1/4th. */
+ DRX_GUARD_UNKNOWN = DRX_UNKNOWN,
+ /*< Guard interval unknown. */
+ DRX_GUARD_AUTO = DRX_AUTO
+ /*< Autodetect guard interval. */
+};
+
+/*
+* \enum enum drx_fft_mode
+* \brief FFT mode.
+*/
+enum drx_fft_mode {
+ DRX_FFTMODE_2K = 0, /*< 2K FFT mode. */
+ DRX_FFTMODE_4K, /*< 4K FFT mode. */
+ DRX_FFTMODE_8K, /*< 8K FFT mode. */
+ DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN,
+ /*< FFT mode unknown. */
+ DRX_FFTMODE_AUTO = DRX_AUTO
+ /*< Autodetect FFT mode. */
+};
+
+/*
+* \enum enum drx_classification
+* \brief Channel classification.
+*/
+enum drx_classification {
+ DRX_CLASSIFICATION_GAUSS = 0, /*< Gaussion noise. */
+ DRX_CLASSIFICATION_HVY_GAUSS, /*< Heavy Gaussion noise. */
+ DRX_CLASSIFICATION_COCHANNEL, /*< Co-channel. */
+ DRX_CLASSIFICATION_STATIC, /*< Static echo. */
+ DRX_CLASSIFICATION_MOVING, /*< Moving echo. */
+ DRX_CLASSIFICATION_ZERODB, /*< Zero dB echo. */
+ DRX_CLASSIFICATION_UNKNOWN = DRX_UNKNOWN,
+ /*< Unknown classification */
+ DRX_CLASSIFICATION_AUTO = DRX_AUTO
+ /*< Autodetect classification. */
+};
+
+/*
+* /enum enum drx_interleave_mode
+* /brief Interleave modes
+*/
+enum drx_interleave_mode {
+ DRX_INTERLEAVEMODE_I128_J1 = 0,
+ DRX_INTERLEAVEMODE_I128_J1_V2,
+ DRX_INTERLEAVEMODE_I128_J2,
+ DRX_INTERLEAVEMODE_I64_J2,
+ DRX_INTERLEAVEMODE_I128_J3,
+ DRX_INTERLEAVEMODE_I32_J4,
+ DRX_INTERLEAVEMODE_I128_J4,
+ DRX_INTERLEAVEMODE_I16_J8,
+ DRX_INTERLEAVEMODE_I128_J5,
+ DRX_INTERLEAVEMODE_I8_J16,
+ DRX_INTERLEAVEMODE_I128_J6,
+ DRX_INTERLEAVEMODE_RESERVED_11,
+ DRX_INTERLEAVEMODE_I128_J7,
+ DRX_INTERLEAVEMODE_RESERVED_13,
+ DRX_INTERLEAVEMODE_I128_J8,
+ DRX_INTERLEAVEMODE_RESERVED_15,
+ DRX_INTERLEAVEMODE_I12_J17,
+ DRX_INTERLEAVEMODE_I5_J4,
+ DRX_INTERLEAVEMODE_B52_M240,
+ DRX_INTERLEAVEMODE_B52_M720,
+ DRX_INTERLEAVEMODE_B52_M48,
+ DRX_INTERLEAVEMODE_B52_M0,
+ DRX_INTERLEAVEMODE_UNKNOWN = DRX_UNKNOWN,
+ /*< Unknown interleave mode */
+ DRX_INTERLEAVEMODE_AUTO = DRX_AUTO
+ /*< Autodetect interleave mode */
+};
+
+/*
+* \enum enum drx_carrier_mode
+* \brief Channel Carrier Mode.
+*/
+enum drx_carrier_mode {
+ DRX_CARRIER_MULTI = 0, /*< Multi carrier mode */
+ DRX_CARRIER_SINGLE, /*< Single carrier mode */
+ DRX_CARRIER_UNKNOWN = DRX_UNKNOWN,
+ /*< Carrier mode unknown. */
+ DRX_CARRIER_AUTO = DRX_AUTO /*< Autodetect carrier mode */
+};
+
+/*
+* \enum enum drx_frame_mode
+* \brief Channel Frame Mode.
+*/
+enum drx_frame_mode {
+ DRX_FRAMEMODE_420 = 0, /*< 420 with variable PN */
+ DRX_FRAMEMODE_595, /*< 595 */
+ DRX_FRAMEMODE_945, /*< 945 with variable PN */
+ DRX_FRAMEMODE_420_FIXED_PN,
+ /*< 420 with fixed PN */
+ DRX_FRAMEMODE_945_FIXED_PN,
+ /*< 945 with fixed PN */
+ DRX_FRAMEMODE_UNKNOWN = DRX_UNKNOWN,
+ /*< Frame mode unknown. */
+ DRX_FRAMEMODE_AUTO = DRX_AUTO
+ /*< Autodetect frame mode */
+};
+
+/*
+* \enum enum drx_tps_frame
+* \brief Frame number in current super-frame.
+*/
+enum drx_tps_frame {
+ DRX_TPS_FRAME1 = 0, /*< TPS frame 1. */
+ DRX_TPS_FRAME2, /*< TPS frame 2. */
+ DRX_TPS_FRAME3, /*< TPS frame 3. */
+ DRX_TPS_FRAME4, /*< TPS frame 4. */
+ DRX_TPS_FRAME_UNKNOWN = DRX_UNKNOWN
+ /*< TPS frame unknown. */
+};
+
+/*
+* \enum enum drx_ldpc
+* \brief TPS LDPC .
+*/
+enum drx_ldpc {
+ DRX_LDPC_0_4 = 0, /*< LDPC 0.4 */
+ DRX_LDPC_0_6, /*< LDPC 0.6 */
+ DRX_LDPC_0_8, /*< LDPC 0.8 */
+ DRX_LDPC_UNKNOWN = DRX_UNKNOWN,
+ /*< LDPC unknown. */
+ DRX_LDPC_AUTO = DRX_AUTO /*< Autodetect LDPC */
+};
+
+/*
+* \enum enum drx_pilot_mode
+* \brief Pilot modes in DTMB.
+*/
+enum drx_pilot_mode {
+ DRX_PILOT_ON = 0, /*< Pilot On */
+ DRX_PILOT_OFF, /*< Pilot Off */
+ DRX_PILOT_UNKNOWN = DRX_UNKNOWN,
+ /*< Pilot unknown. */
+ DRX_PILOT_AUTO = DRX_AUTO /*< Autodetect Pilot */
+};
+
+/*
+ * enum drxu_code_action - indicate if firmware has to be uploaded or verified.
+ * @UCODE_UPLOAD: Upload the microcode image to device
+ * @UCODE_VERIFY: Compare microcode image with code on device
+ */
+enum drxu_code_action {
+ UCODE_UPLOAD,
+ UCODE_VERIFY
+};
+
+/*
+* \enum enum drx_lock_status * \brief Used to reflect current lock status of demodulator.
+*
+* The generic lock states have device dependent semantics.
+
+ DRX_NEVER_LOCK = 0,
+ **< Device will never lock on this signal *
+ DRX_NOT_LOCKED,
+ **< Device has no lock at all *
+ DRX_LOCK_STATE_1,
+ **< Generic lock state *
+ DRX_LOCK_STATE_2,
+ **< Generic lock state *
+ DRX_LOCK_STATE_3,
+ **< Generic lock state *
+ DRX_LOCK_STATE_4,
+ **< Generic lock state *
+ DRX_LOCK_STATE_5,
+ **< Generic lock state *
+ DRX_LOCK_STATE_6,
+ **< Generic lock state *
+ DRX_LOCK_STATE_7,
+ **< Generic lock state *
+ DRX_LOCK_STATE_8,
+ **< Generic lock state *
+ DRX_LOCK_STATE_9,
+ **< Generic lock state *
+ DRX_LOCKED **< Device is in lock *
+*/
+
+enum drx_lock_status {
+ DRX_NEVER_LOCK = 0,
+ DRX_NOT_LOCKED,
+ DRX_LOCK_STATE_1,
+ DRX_LOCK_STATE_2,
+ DRX_LOCK_STATE_3,
+ DRX_LOCK_STATE_4,
+ DRX_LOCK_STATE_5,
+ DRX_LOCK_STATE_6,
+ DRX_LOCK_STATE_7,
+ DRX_LOCK_STATE_8,
+ DRX_LOCK_STATE_9,
+ DRX_LOCKED
+};
+
+/*
+* \enum enum drx_uio* \brief Used to address a User IO (UIO).
+*/
+enum drx_uio {
+ DRX_UIO1,
+ DRX_UIO2,
+ DRX_UIO3,
+ DRX_UIO4,
+ DRX_UIO5,
+ DRX_UIO6,
+ DRX_UIO7,
+ DRX_UIO8,
+ DRX_UIO9,
+ DRX_UIO10,
+ DRX_UIO11,
+ DRX_UIO12,
+ DRX_UIO13,
+ DRX_UIO14,
+ DRX_UIO15,
+ DRX_UIO16,
+ DRX_UIO17,
+ DRX_UIO18,
+ DRX_UIO19,
+ DRX_UIO20,
+ DRX_UIO21,
+ DRX_UIO22,
+ DRX_UIO23,
+ DRX_UIO24,
+ DRX_UIO25,
+ DRX_UIO26,
+ DRX_UIO27,
+ DRX_UIO28,
+ DRX_UIO29,
+ DRX_UIO30,
+ DRX_UIO31,
+ DRX_UIO32,
+ DRX_UIO_MAX = DRX_UIO32
+};
+
+/*
+* \enum enum drxuio_mode * \brief Used to configure the modus oprandi of a UIO.
+*
+* DRX_UIO_MODE_FIRMWARE is an old uio mode.
+* It is replaced by the modes DRX_UIO_MODE_FIRMWARE0 .. DRX_UIO_MODE_FIRMWARE9.
+* To be backward compatible DRX_UIO_MODE_FIRMWARE is equivalent to
+* DRX_UIO_MODE_FIRMWARE0.
+*/
+enum drxuio_mode {
+ DRX_UIO_MODE_DISABLE = 0x01,
+ /*< not used, pin is configured as input */
+ DRX_UIO_MODE_READWRITE = 0x02,
+ /*< used for read/write by application */
+ DRX_UIO_MODE_FIRMWARE = 0x04,
+ /*< controlled by firmware, function 0 */
+ DRX_UIO_MODE_FIRMWARE0 = DRX_UIO_MODE_FIRMWARE,
+ /*< same as above */
+ DRX_UIO_MODE_FIRMWARE1 = 0x08,
+ /*< controlled by firmware, function 1 */
+ DRX_UIO_MODE_FIRMWARE2 = 0x10,
+ /*< controlled by firmware, function 2 */
+ DRX_UIO_MODE_FIRMWARE3 = 0x20,
+ /*< controlled by firmware, function 3 */
+ DRX_UIO_MODE_FIRMWARE4 = 0x40,
+ /*< controlled by firmware, function 4 */
+ DRX_UIO_MODE_FIRMWARE5 = 0x80
+ /*< controlled by firmware, function 5 */
+};
+
+/*
+* \enum enum drxoob_downstream_standard * \brief Used to select OOB standard.
+*
+* Based on ANSI 55-1 and 55-2
+*/
+enum drxoob_downstream_standard {
+ DRX_OOB_MODE_A = 0,
+ /*< ANSI 55-1 */
+ DRX_OOB_MODE_B_GRADE_A,
+ /*< ANSI 55-2 A */
+ DRX_OOB_MODE_B_GRADE_B
+ /*< ANSI 55-2 B */
+};
+
+/*-------------------------------------------------------------------------
+STRUCTS
+-------------------------------------------------------------------------*/
+
+/*============================================================================*/
+/*============================================================================*/
+/*== CTRL CFG related data structures ========================================*/
+/*============================================================================*/
+/*============================================================================*/
+
+#ifndef DRX_CFG_BASE
+#define DRX_CFG_BASE 0
+#endif
+
+#define DRX_CFG_MPEG_OUTPUT (DRX_CFG_BASE + 0) /* MPEG TS output */
+#define DRX_CFG_PKTERR (DRX_CFG_BASE + 1) /* Packet Error */
+#define DRX_CFG_SYMCLK_OFFS (DRX_CFG_BASE + 2) /* Symbol Clk Offset */
+#define DRX_CFG_SMA (DRX_CFG_BASE + 3) /* Smart Antenna */
+#define DRX_CFG_PINSAFE (DRX_CFG_BASE + 4) /* Pin safe mode */
+#define DRX_CFG_SUBSTANDARD (DRX_CFG_BASE + 5) /* substandard */
+#define DRX_CFG_AUD_VOLUME (DRX_CFG_BASE + 6) /* volume */
+#define DRX_CFG_AUD_RDS (DRX_CFG_BASE + 7) /* rds */
+#define DRX_CFG_AUD_AUTOSOUND (DRX_CFG_BASE + 8) /* ASS & ASC */
+#define DRX_CFG_AUD_ASS_THRES (DRX_CFG_BASE + 9) /* ASS Thresholds */
+#define DRX_CFG_AUD_DEVIATION (DRX_CFG_BASE + 10) /* Deviation */
+#define DRX_CFG_AUD_PRESCALE (DRX_CFG_BASE + 11) /* Prescale */
+#define DRX_CFG_AUD_MIXER (DRX_CFG_BASE + 12) /* Mixer */
+#define DRX_CFG_AUD_AVSYNC (DRX_CFG_BASE + 13) /* AVSync */
+#define DRX_CFG_AUD_CARRIER (DRX_CFG_BASE + 14) /* Audio carriers */
+#define DRX_CFG_I2S_OUTPUT (DRX_CFG_BASE + 15) /* I2S output */
+#define DRX_CFG_ATV_STANDARD (DRX_CFG_BASE + 16) /* ATV standard */
+#define DRX_CFG_SQI_SPEED (DRX_CFG_BASE + 17) /* SQI speed */
+#define DRX_CTRL_CFG_MAX (DRX_CFG_BASE + 18) /* never to be used */
+
+#define DRX_CFG_PINS_SAFE_MODE DRX_CFG_PINSAFE
+/*============================================================================*/
+/*============================================================================*/
+/*== CTRL related data structures ============================================*/
+/*============================================================================*/
+/*============================================================================*/
+
+/*
+ * struct drxu_code_info Parameters for microcode upload and verfiy.
+ *
+ * @mc_file: microcode file name
+ *
+ * Used by DRX_CTRL_LOAD_UCODE and DRX_CTRL_VERIFY_UCODE
+ */
+struct drxu_code_info {
+ char *mc_file;
+};
+
+/*
+* \struct drx_mc_version_rec_t
+* \brief Microcode version record
+* Version numbers are stored in BCD format, as usual:
+* o major number = bits 31-20 (first three nibbles of MSW)
+* o minor number = bits 19-16 (fourth nibble of MSW)
+* o patch number = bits 15-0 (remaining nibbles in LSW)
+*
+* The device type indicates for which the device is meant. It is based on the
+* JTAG ID, using everything except the bond ID and the metal fix.
+*
+* Special values:
+* - mc_dev_type == 0 => any device allowed
+* - mc_base_version == 0.0.0 => full microcode (mc_version is the version)
+* - mc_base_version != 0.0.0 => patch microcode, the base microcode version
+* (mc_version is the version)
+*/
+#define AUX_VER_RECORD 0x8000
+
+struct drx_mc_version_rec {
+ u16 aux_type; /* type of aux data - 0x8000 for version record */
+ u32 mc_dev_type; /* device type, based on JTAG ID */
+ u32 mc_version; /* version of microcode */
+ u32 mc_base_version; /* in case of patch: the original microcode version */
+};
+
+/*========================================*/
+
+/*
+* \struct drx_filter_info_t
+* \brief Parameters for loading filter coefficients
+*
+* Used by DRX_CTRL_LOAD_FILTER
+*/
+struct drx_filter_info {
+ u8 *data_re;
+ /*< pointer to coefficients for RE */
+ u8 *data_im;
+ /*< pointer to coefficients for IM */
+ u16 size_re;
+ /*< size of coefficients for RE */
+ u16 size_im;
+ /*< size of coefficients for IM */
+};
+
+/*========================================*/
+
+/*
+* \struct struct drx_channel * \brief The set of parameters describing a single channel.
+*
+* Used by DRX_CTRL_SET_CHANNEL and DRX_CTRL_GET_CHANNEL.
+* Only certain fields need to be used for a specific standard.
+*
+*/
+struct drx_channel {
+ s32 frequency;
+ /*< frequency in kHz */
+ enum drx_bandwidth bandwidth;
+ /*< bandwidth */
+ enum drx_mirror mirror; /*< mirrored or not on RF */
+ enum drx_modulation constellation;
+ /*< constellation */
+ enum drx_hierarchy hierarchy;
+ /*< hierarchy */
+ enum drx_priority priority; /*< priority */
+ enum drx_coderate coderate; /*< coderate */
+ enum drx_guard guard; /*< guard interval */
+ enum drx_fft_mode fftmode; /*< fftmode */
+ enum drx_classification classification;
+ /*< classification */
+ u32 symbolrate;
+ /*< symbolrate in symbols/sec */
+ enum drx_interleave_mode interleavemode;
+ /*< interleaveMode QAM */
+ enum drx_ldpc ldpc; /*< ldpc */
+ enum drx_carrier_mode carrier; /*< carrier */
+ enum drx_frame_mode framemode;
+ /*< frame mode */
+ enum drx_pilot_mode pilot; /*< pilot mode */
+};
+
+/*========================================*/
+
+enum drx_cfg_sqi_speed {
+ DRX_SQI_SPEED_FAST = 0,
+ DRX_SQI_SPEED_MEDIUM,
+ DRX_SQI_SPEED_SLOW,
+ DRX_SQI_SPEED_UNKNOWN = DRX_UNKNOWN
+};
+
+/*========================================*/
+
+/*
+* \struct struct drx_complex * A complex number.
+*
+* Used by DRX_CTRL_CONSTEL.
+*/
+struct drx_complex {
+ s16 im;
+ /*< Imaginary part. */
+ s16 re;
+ /*< Real part. */
+};
+
+/*========================================*/
+
+/*
+* \struct struct drx_frequency_plan * Array element of a frequency plan.
+*
+* Used by DRX_CTRL_SCAN_INIT.
+*/
+struct drx_frequency_plan {
+ s32 first;
+ /*< First centre frequency in this band */
+ s32 last;
+ /*< Last centre frequency in this band */
+ s32 step;
+ /*< Stepping frequency in this band */
+ enum drx_bandwidth bandwidth;
+ /*< Bandwidth within this frequency band */
+ u16 ch_number;
+ /*< First channel number in this band, or first
+ index in ch_names */
+ char **ch_names;
+ /*< Optional list of channel names in this
+ band */
+};
+
+/*========================================*/
+
+/*
+* \struct struct drx_scan_param * Parameters for channel scan.
+*
+* Used by DRX_CTRL_SCAN_INIT.
+*/
+struct drx_scan_param {
+ struct drx_frequency_plan *frequency_plan;
+ /*< Frequency plan (array)*/
+ u16 frequency_plan_size; /*< Number of bands */
+ u32 num_tries; /*< Max channels tried */
+ s32 skip; /*< Minimum frequency step to take
+ after a channel is found */
+ void *ext_params; /*< Standard specific params */
+};
+
+/*========================================*/
+
+/*
+* \brief Scan commands.
+* Used by scanning algorithms.
+*/
+enum drx_scan_command {
+ DRX_SCAN_COMMAND_INIT = 0,/*< Initialize scanning */
+ DRX_SCAN_COMMAND_NEXT, /*< Next scan */
+ DRX_SCAN_COMMAND_STOP /*< Stop scanning */
+};
+
+/*========================================*/
+
+/*
+* \brief Inner scan function prototype.
+*/
+typedef int(*drx_scan_func_t) (void *scan_context,
+ enum drx_scan_command scan_command,
+ struct drx_channel *scan_channel,
+ bool *get_next_channel);
+
+/*========================================*/
+
+/*
+* \struct struct drxtps_info * TPS information, DVB-T specific.
+*
+* Used by DRX_CTRL_TPS_INFO.
+*/
+ struct drxtps_info {
+ enum drx_fft_mode fftmode; /*< Fft mode */
+ enum drx_guard guard; /*< Guard interval */
+ enum drx_modulation constellation;
+ /*< Constellation */
+ enum drx_hierarchy hierarchy;
+ /*< Hierarchy */
+ enum drx_coderate high_coderate;
+ /*< High code rate */
+ enum drx_coderate low_coderate;
+ /*< Low cod rate */
+ enum drx_tps_frame frame; /*< Tps frame */
+ u8 length; /*< Length */
+ u16 cell_id; /*< Cell id */
+ };
+
+/*========================================*/
+
+/*
+* \brief Power mode of device.
+*
+* Used by DRX_CTRL_SET_POWER_MODE.
+*/
+ enum drx_power_mode {
+ DRX_POWER_UP = 0,
+ /*< Generic , Power Up Mode */
+ DRX_POWER_MODE_1,
+ /*< Device specific , Power Up Mode */
+ DRX_POWER_MODE_2,
+ /*< Device specific , Power Up Mode */
+ DRX_POWER_MODE_3,
+ /*< Device specific , Power Up Mode */
+ DRX_POWER_MODE_4,
+ /*< Device specific , Power Up Mode */
+ DRX_POWER_MODE_5,
+ /*< Device specific , Power Up Mode */
+ DRX_POWER_MODE_6,
+ /*< Device specific , Power Up Mode */
+ DRX_POWER_MODE_7,
+ /*< Device specific , Power Up Mode */
+ DRX_POWER_MODE_8,
+ /*< Device specific , Power Up Mode */
+
+ DRX_POWER_MODE_9,
+ /*< Device specific , Power Down Mode */
+ DRX_POWER_MODE_10,
+ /*< Device specific , Power Down Mode */
+ DRX_POWER_MODE_11,
+ /*< Device specific , Power Down Mode */
+ DRX_POWER_MODE_12,
+ /*< Device specific , Power Down Mode */
+ DRX_POWER_MODE_13,
+ /*< Device specific , Power Down Mode */
+ DRX_POWER_MODE_14,
+ /*< Device specific , Power Down Mode */
+ DRX_POWER_MODE_15,
+ /*< Device specific , Power Down Mode */
+ DRX_POWER_MODE_16,
+ /*< Device specific , Power Down Mode */
+ DRX_POWER_DOWN = 255
+ /*< Generic , Power Down Mode */
+ };
+
+/*========================================*/
+
+/*
+* \enum enum drx_module * \brief Software module identification.
+*
+* Used by DRX_CTRL_VERSION.
+*/
+ enum drx_module {
+ DRX_MODULE_DEVICE,
+ DRX_MODULE_MICROCODE,
+ DRX_MODULE_DRIVERCORE,
+ DRX_MODULE_DEVICEDRIVER,
+ DRX_MODULE_DAP,
+ DRX_MODULE_BSP_I2C,
+ DRX_MODULE_BSP_TUNER,
+ DRX_MODULE_BSP_HOST,
+ DRX_MODULE_UNKNOWN
+ };
+
+/*
+* \enum struct drx_version * \brief Version information of one software module.
+*
+* Used by DRX_CTRL_VERSION.
+*/
+ struct drx_version {
+ enum drx_module module_type;
+ /*< Type identifier of the module */
+ char *module_name;
+ /*< Name or description of module */
+ u16 v_major; /*< Major version number */
+ u16 v_minor; /*< Minor version number */
+ u16 v_patch; /*< Patch version number */
+ char *v_string; /*< Version as text string */
+ };
+
+/*
+* \enum struct drx_version_list * \brief List element of NULL terminated, linked list for version information.
+*
+* Used by DRX_CTRL_VERSION.
+*/
+struct drx_version_list {
+ struct drx_version *version;/*< Version information */
+ struct drx_version_list *next;
+ /*< Next list element */
+};
+
+/*========================================*/
+
+/*
+* \brief Parameters needed to confiugure a UIO.
+*
+* Used by DRX_CTRL_UIO_CFG.
+*/
+ struct drxuio_cfg {
+ enum drx_uio uio;
+ /*< UIO identifier */
+ enum drxuio_mode mode;
+ /*< UIO operational mode */
+ };
+
+/*========================================*/
+
+/*
+* \brief Parameters needed to read from or write to a UIO.
+*
+* Used by DRX_CTRL_UIO_READ and DRX_CTRL_UIO_WRITE.
+*/
+ struct drxuio_data {
+ enum drx_uio uio;
+ /*< UIO identifier */
+ bool value;
+ /*< UIO value (true=1, false=0) */
+ };
+
+/*========================================*/
+
+/*
+* \brief Parameters needed to configure OOB.
+*
+* Used by DRX_CTRL_SET_OOB.
+*/
+ struct drxoob {
+ s32 frequency; /*< Frequency in kHz */
+ enum drxoob_downstream_standard standard;
+ /*< OOB standard */
+ bool spectrum_inverted; /*< If true, then spectrum
+ is inverted */
+ };
+
+/*========================================*/
+
+/*
+* \brief Metrics from OOB.
+*
+* Used by DRX_CTRL_GET_OOB.
+*/
+ struct drxoob_status {
+ s32 frequency; /*< Frequency in Khz */
+ enum drx_lock_status lock; /*< Lock status */
+ u32 mer; /*< MER */
+ s32 symbol_rate_offset; /*< Symbolrate offset in ppm */
+ };
+
+/*========================================*/
+
+/*
+* \brief Device dependent configuration data.
+*
+* Used by DRX_CTRL_SET_CFG and DRX_CTRL_GET_CFG.
+* A sort of nested drx_ctrl() functionality for device specific controls.
+*/
+ struct drx_cfg {
+ u32 cfg_type;
+ /*< Function identifier */
+ void *cfg_data;
+ /*< Function data */
+ };
+
+/*========================================*/
+
+/*
+* /struct DRXMpegStartWidth_t
+* MStart width [nr MCLK cycles] for serial MPEG output.
+*/
+
+ enum drxmpeg_str_width {
+ DRX_MPEG_STR_WIDTH_1,
+ DRX_MPEG_STR_WIDTH_8
+ };
+
+/* CTRL CFG MPEG output */
+/*
+* \struct struct drx_cfg_mpeg_output * \brief Configuration parameters for MPEG output control.
+*
+* Used by DRX_CFG_MPEG_OUTPUT, in combination with DRX_CTRL_SET_CFG and
+* DRX_CTRL_GET_CFG.
+*/
+
+ struct drx_cfg_mpeg_output {
+ bool enable_mpeg_output;/*< If true, enable MPEG output */
+ bool insert_rs_byte; /*< If true, insert RS byte */
+ bool enable_parallel; /*< If true, parallel out otherwise
+ serial */
+ bool invert_data; /*< If true, invert DATA signals */
+ bool invert_err; /*< If true, invert ERR signal */
+ bool invert_str; /*< If true, invert STR signals */
+ bool invert_val; /*< If true, invert VAL signals */
+ bool invert_clk; /*< If true, invert CLK signals */
+ bool static_clk; /*< If true, static MPEG clockrate
+ will be used, otherwise clockrate
+ will adapt to the bitrate of the
+ TS */
+ u32 bitrate; /*< Maximum bitrate in b/s in case
+ static clockrate is selected */
+ enum drxmpeg_str_width width_str;
+ /*< MPEG start width */
+ };
+
+
+/*========================================*/
+
+/*
+* \struct struct drxi2c_data * \brief Data for I2C via 2nd or 3rd or etc I2C port.
+*
+* Used by DRX_CTRL_I2C_READWRITE.
+* If port_nr is equal to primairy port_nr BSPI2C will be used.
+*
+*/
+ struct drxi2c_data {
+ u16 port_nr; /*< I2C port number */
+ struct i2c_device_addr *w_dev_addr;
+ /*< Write device address */
+ u16 w_count; /*< Size of write data in bytes */
+ u8 *wData; /*< Pointer to write data */
+ struct i2c_device_addr *r_dev_addr;
+ /*< Read device address */
+ u16 r_count; /*< Size of data to read in bytes */
+ u8 *r_data; /*< Pointer to read buffer */
+ };
+
+/*========================================*/
+
+/*
+* \enum enum drx_aud_standard * \brief Audio standard identifier.
+*
+* Used by DRX_CTRL_SET_AUD.
+*/
+ enum drx_aud_standard {
+ DRX_AUD_STANDARD_BTSC, /*< set BTSC standard (USA) */
+ DRX_AUD_STANDARD_A2, /*< set A2-Korea FM Stereo */
+ DRX_AUD_STANDARD_EIAJ, /*< set to Japanese FM Stereo */
+ DRX_AUD_STANDARD_FM_STEREO,/*< set to FM-Stereo Radio */
+ DRX_AUD_STANDARD_M_MONO, /*< for 4.5 MHz mono detected */
+ DRX_AUD_STANDARD_D_K_MONO, /*< for 6.5 MHz mono detected */
+ DRX_AUD_STANDARD_BG_FM, /*< set BG_FM standard */
+ DRX_AUD_STANDARD_D_K1, /*< set D_K1 standard */
+ DRX_AUD_STANDARD_D_K2, /*< set D_K2 standard */
+ DRX_AUD_STANDARD_D_K3, /*< set D_K3 standard */
+ DRX_AUD_STANDARD_BG_NICAM_FM,
+ /*< set BG_NICAM_FM standard */
+ DRX_AUD_STANDARD_L_NICAM_AM,
+ /*< set L_NICAM_AM standard */
+ DRX_AUD_STANDARD_I_NICAM_FM,
+ /*< set I_NICAM_FM standard */
+ DRX_AUD_STANDARD_D_K_NICAM_FM,
+ /*< set D_K_NICAM_FM standard */
+ DRX_AUD_STANDARD_NOT_READY,/*< used to detect audio standard */
+ DRX_AUD_STANDARD_AUTO = DRX_AUTO,
+ /*< Automatic Standard Detection */
+ DRX_AUD_STANDARD_UNKNOWN = DRX_UNKNOWN
+ /*< used as auto and for readback */
+ };
+
+/* CTRL_AUD_GET_STATUS - struct drx_aud_status */
+/*
+* \enum enum drx_aud_nicam_status * \brief Status of NICAM carrier.
+*/
+ enum drx_aud_nicam_status {
+ DRX_AUD_NICAM_DETECTED = 0,
+ /*< NICAM carrier detected */
+ DRX_AUD_NICAM_NOT_DETECTED,
+ /*< NICAM carrier not detected */
+ DRX_AUD_NICAM_BAD /*< NICAM carrier bad quality */
+ };
+
+/*
+* \struct struct drx_aud_status * \brief Audio status characteristics.
+*/
+ struct drx_aud_status {
+ bool stereo; /*< stereo detection */
+ bool carrier_a; /*< carrier A detected */
+ bool carrier_b; /*< carrier B detected */
+ bool sap; /*< sap / bilingual detection */
+ bool rds; /*< RDS data array present */
+ enum drx_aud_nicam_status nicam_status;
+ /*< status of NICAM carrier */
+ s8 fm_ident; /*< FM Identification value */
+ };
+
+/* CTRL_AUD_READ_RDS - DRXRDSdata_t */
+
+/*
+* \struct DRXRDSdata_t
+* \brief Raw RDS data array.
+*/
+ struct drx_cfg_aud_rds {
+ bool valid; /*< RDS data validation */
+ u16 data[18]; /*< data from one RDS data array */
+ };
+
+/* DRX_CFG_AUD_VOLUME - struct drx_cfg_aud_volume - set/get */
+/*
+* \enum DRXAudAVCDecayTime_t
+* \brief Automatic volume control configuration.
+*/
+ enum drx_aud_avc_mode {
+ DRX_AUD_AVC_OFF, /*< Automatic volume control off */
+ DRX_AUD_AVC_DECAYTIME_8S, /*< level volume in 8 seconds */
+ DRX_AUD_AVC_DECAYTIME_4S, /*< level volume in 4 seconds */
+ DRX_AUD_AVC_DECAYTIME_2S, /*< level volume in 2 seconds */
+ DRX_AUD_AVC_DECAYTIME_20MS/*< level volume in 20 millisec */
+ };
+
+/*
+* /enum DRXAudMaxAVCGain_t
+* /brief Automatic volume control max gain in audio baseband.
+*/
+ enum drx_aud_avc_max_gain {
+ DRX_AUD_AVC_MAX_GAIN_0DB, /*< maximum AVC gain 0 dB */
+ DRX_AUD_AVC_MAX_GAIN_6DB, /*< maximum AVC gain 6 dB */
+ DRX_AUD_AVC_MAX_GAIN_12DB /*< maximum AVC gain 12 dB */
+ };
+
+/*
+* /enum DRXAudMaxAVCAtten_t
+* /brief Automatic volume control max attenuation in audio baseband.
+*/
+ enum drx_aud_avc_max_atten {
+ DRX_AUD_AVC_MAX_ATTEN_12DB,
+ /*< maximum AVC attenuation 12 dB */
+ DRX_AUD_AVC_MAX_ATTEN_18DB,
+ /*< maximum AVC attenuation 18 dB */
+ DRX_AUD_AVC_MAX_ATTEN_24DB/*< maximum AVC attenuation 24 dB */
+ };
+/*
+* \struct struct drx_cfg_aud_volume * \brief Audio volume configuration.
+*/
+ struct drx_cfg_aud_volume {
+ bool mute; /*< mute overrides volume setting */
+ s16 volume; /*< volume, range -114 to 12 dB */
+ enum drx_aud_avc_mode avc_mode; /*< AVC auto volume control mode */
+ u16 avc_ref_level; /*< AVC reference level */
+ enum drx_aud_avc_max_gain avc_max_gain;
+ /*< AVC max gain selection */
+ enum drx_aud_avc_max_atten avc_max_atten;
+ /*< AVC max attenuation selection */
+ s16 strength_left; /*< quasi-peak, left speaker */
+ s16 strength_right; /*< quasi-peak, right speaker */
+ };
+
+/* DRX_CFG_I2S_OUTPUT - struct drx_cfg_i2s_output - set/get */
+/*
+* \enum enum drxi2s_mode * \brief I2S output mode.
+*/
+ enum drxi2s_mode {
+ DRX_I2S_MODE_MASTER, /*< I2S is in master mode */
+ DRX_I2S_MODE_SLAVE /*< I2S is in slave mode */
+ };
+
+/*
+* \enum enum drxi2s_word_length * \brief Width of I2S data.
+*/
+ enum drxi2s_word_length {
+ DRX_I2S_WORDLENGTH_32 = 0,/*< I2S data is 32 bit wide */
+ DRX_I2S_WORDLENGTH_16 = 1 /*< I2S data is 16 bit wide */
+ };
+
+/*
+* \enum enum drxi2s_format * \brief Data wordstrobe alignment for I2S.
+*/
+ enum drxi2s_format {
+ DRX_I2S_FORMAT_WS_WITH_DATA,
+ /*< I2S data and wordstrobe are aligned */
+ DRX_I2S_FORMAT_WS_ADVANCED
+ /*< I2S data one cycle after wordstrobe */
+ };
+
+/*
+* \enum enum drxi2s_polarity * \brief Polarity of I2S data.
+*/
+ enum drxi2s_polarity {
+ DRX_I2S_POLARITY_RIGHT,/*< wordstrobe - right high, left low */
+ DRX_I2S_POLARITY_LEFT /*< wordstrobe - right low, left high */
+ };
+
+/*
+* \struct struct drx_cfg_i2s_output * \brief I2S output configuration.
+*/
+ struct drx_cfg_i2s_output {
+ bool output_enable; /*< I2S output enable */
+ u32 frequency; /*< range from 8000-48000 Hz */
+ enum drxi2s_mode mode; /*< I2S mode, master or slave */
+ enum drxi2s_word_length word_length;
+ /*< I2S wordlength, 16 or 32 bits */
+ enum drxi2s_polarity polarity;/*< I2S wordstrobe polarity */
+ enum drxi2s_format format; /*< I2S wordstrobe delay to data */
+ };
+
+/* ------------------------------expert interface-----------------------------*/
+/*
+* /enum enum drx_aud_fm_deemphasis * setting for FM-Deemphasis in audio demodulator.
+*
+*/
+ enum drx_aud_fm_deemphasis {
+ DRX_AUD_FM_DEEMPH_50US,
+ DRX_AUD_FM_DEEMPH_75US,
+ DRX_AUD_FM_DEEMPH_OFF
+ };
+
+/*
+* /enum DRXAudDeviation_t
+* setting for deviation mode in audio demodulator.
+*
+*/
+ enum drx_cfg_aud_deviation {
+ DRX_AUD_DEVIATION_NORMAL,
+ DRX_AUD_DEVIATION_HIGH
+ };
+
+/*
+* /enum enum drx_no_carrier_option * setting for carrier, mute/noise.
+*
+*/
+ enum drx_no_carrier_option {
+ DRX_NO_CARRIER_MUTE,
+ DRX_NO_CARRIER_NOISE
+ };
+
+/*
+* \enum DRXAudAutoSound_t
+* \brief Automatic Sound
+*/
+ enum drx_cfg_aud_auto_sound {
+ DRX_AUD_AUTO_SOUND_OFF = 0,
+ DRX_AUD_AUTO_SOUND_SELECT_ON_CHANGE_ON,
+ DRX_AUD_AUTO_SOUND_SELECT_ON_CHANGE_OFF
+ };
+
+/*
+* \enum DRXAudASSThres_t
+* \brief Automatic Sound Select Thresholds
+*/
+ struct drx_cfg_aud_ass_thres {
+ u16 a2; /* A2 Threshold for ASS configuration */
+ u16 btsc; /* BTSC Threshold for ASS configuration */
+ u16 nicam; /* Nicam Threshold for ASS configuration */
+ };
+
+/*
+* \struct struct drx_aud_carrier * \brief Carrier detection related parameters
+*/
+ struct drx_aud_carrier {
+ u16 thres; /* carrier detetcion threshold for primary carrier (A) */
+ enum drx_no_carrier_option opt; /* Mute or noise at no carrier detection (A) */
+ s32 shift; /* DC level of incoming signal (A) */
+ s32 dco; /* frequency adjustment (A) */
+ };
+
+/*
+* \struct struct drx_cfg_aud_carriers * \brief combining carrier A & B to one struct
+*/
+ struct drx_cfg_aud_carriers {
+ struct drx_aud_carrier a;
+ struct drx_aud_carrier b;
+ };
+
+/*
+* /enum enum drx_aud_i2s_src * Selection of audio source
+*/
+ enum drx_aud_i2s_src {
+ DRX_AUD_SRC_MONO,
+ DRX_AUD_SRC_STEREO_OR_AB,
+ DRX_AUD_SRC_STEREO_OR_A,
+ DRX_AUD_SRC_STEREO_OR_B};
+
+/*
+* \enum enum drx_aud_i2s_matrix * \brief Used for selecting I2S output.
+*/
+ enum drx_aud_i2s_matrix {
+ DRX_AUD_I2S_MATRIX_A_MONO,
+ /*< A sound only, stereo or mono */
+ DRX_AUD_I2S_MATRIX_B_MONO,
+ /*< B sound only, stereo or mono */
+ DRX_AUD_I2S_MATRIX_STEREO,
+ /*< A+B sound, transparent */
+ DRX_AUD_I2S_MATRIX_MONO /*< A+B mixed to mono sum, (L+R)/2 */};
+
+/*
+* /enum enum drx_aud_fm_matrix * setting for FM-Matrix in audio demodulator.
+*
+*/
+ enum drx_aud_fm_matrix {
+ DRX_AUD_FM_MATRIX_NO_MATRIX,
+ DRX_AUD_FM_MATRIX_GERMAN,
+ DRX_AUD_FM_MATRIX_KOREAN,
+ DRX_AUD_FM_MATRIX_SOUND_A,
+ DRX_AUD_FM_MATRIX_SOUND_B};
+
+/*
+* \struct DRXAudMatrices_t
+* \brief Mixer settings
+*/
+struct drx_cfg_aud_mixer {
+ enum drx_aud_i2s_src source_i2s;
+ enum drx_aud_i2s_matrix matrix_i2s;
+ enum drx_aud_fm_matrix matrix_fm;
+};
+
+/*
+* \enum DRXI2SVidSync_t
+* \brief Audio/video synchronization, interacts with I2S mode.
+* AUTO_1 and AUTO_2 are for automatic video standard detection with preference
+* for NTSC or Monochrome, because the frequencies are too close (59.94 & 60 Hz)
+*/
+ enum drx_cfg_aud_av_sync {
+ DRX_AUD_AVSYNC_OFF,/*< audio/video synchronization is off */
+ DRX_AUD_AVSYNC_NTSC,
+ /*< it is an NTSC system */
+ DRX_AUD_AVSYNC_MONOCHROME,
+ /*< it is a MONOCHROME system */
+ DRX_AUD_AVSYNC_PAL_SECAM
+ /*< it is a PAL/SECAM system */};
+
+/*
+* \struct struct drx_cfg_aud_prescale * \brief Prescalers
+*/
+struct drx_cfg_aud_prescale {
+ u16 fm_deviation;
+ s16 nicam_gain;
+};
+
+/*
+* \struct struct drx_aud_beep * \brief Beep
+*/
+struct drx_aud_beep {
+ s16 volume; /* dB */
+ u16 frequency; /* Hz */
+ bool mute;
+};
+
+/*
+* \enum enum drx_aud_btsc_detect * \brief BTSC detetcion mode
+*/
+ enum drx_aud_btsc_detect {
+ DRX_BTSC_STEREO,
+ DRX_BTSC_MONO_AND_SAP};
+
+/*
+* \struct struct drx_aud_data * \brief Audio data structure
+*/
+struct drx_aud_data {
+ /* audio storage */
+ bool audio_is_active;
+ enum drx_aud_standard audio_standard;
+ struct drx_cfg_i2s_output i2sdata;
+ struct drx_cfg_aud_volume volume;
+ enum drx_cfg_aud_auto_sound auto_sound;
+ struct drx_cfg_aud_ass_thres ass_thresholds;
+ struct drx_cfg_aud_carriers carriers;
+ struct drx_cfg_aud_mixer mixer;
+ enum drx_cfg_aud_deviation deviation;
+ enum drx_cfg_aud_av_sync av_sync;
+ struct drx_cfg_aud_prescale prescale;
+ enum drx_aud_fm_deemphasis deemph;
+ enum drx_aud_btsc_detect btsc_detect;
+ /* rds */
+ u16 rds_data_counter;
+ bool rds_data_present;
+};
+
+/*
+* \enum enum drx_qam_lock_range * \brief QAM lock range mode
+*/
+ enum drx_qam_lock_range {
+ DRX_QAM_LOCKRANGE_NORMAL,
+ DRX_QAM_LOCKRANGE_EXTENDED};
+
+/*============================================================================*/
+/*============================================================================*/
+/*== Data access structures ==================================================*/
+/*============================================================================*/
+/*============================================================================*/
+
+/* Address on device */
+ typedef u32 dr_xaddr_t, *pdr_xaddr_t;
+
+/* Protocol specific flags */
+ typedef u32 dr_xflags_t, *pdr_xflags_t;
+
+/* Write block of data to device */
+ typedef int(*drx_write_block_func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 addr, /* address of register/memory */
+ u16 datasize, /* size of data in bytes */
+ u8 *data, /* data to send */
+ u32 flags);
+
+/* Read block of data from device */
+ typedef int(*drx_read_block_func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 addr, /* address of register/memory */
+ u16 datasize, /* size of data in bytes */
+ u8 *data, /* receive buffer */
+ u32 flags);
+
+/* Write 8-bits value to device */
+ typedef int(*drx_write_reg8func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 addr, /* address of register/memory */
+ u8 data, /* data to send */
+ u32 flags);
+
+/* Read 8-bits value to device */
+ typedef int(*drx_read_reg8func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 addr, /* address of register/memory */
+ u8 *data, /* receive buffer */
+ u32 flags);
+
+/* Read modify write 8-bits value to device */
+ typedef int(*drx_read_modify_write_reg8func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 waddr, /* write address of register */
+ u32 raddr, /* read address of register */
+ u8 wdata, /* data to write */
+ u8 *rdata); /* data to read */
+
+/* Write 16-bits value to device */
+ typedef int(*drx_write_reg16func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 addr, /* address of register/memory */
+ u16 data, /* data to send */
+ u32 flags);
+
+/* Read 16-bits value to device */
+ typedef int(*drx_read_reg16func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 addr, /* address of register/memory */
+ u16 *data, /* receive buffer */
+ u32 flags);
+
+/* Read modify write 16-bits value to device */
+ typedef int(*drx_read_modify_write_reg16func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 waddr, /* write address of register */
+ u32 raddr, /* read address of register */
+ u16 wdata, /* data to write */
+ u16 *rdata); /* data to read */
+
+/* Write 32-bits value to device */
+ typedef int(*drx_write_reg32func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 addr, /* address of register/memory */
+ u32 data, /* data to send */
+ u32 flags);
+
+/* Read 32-bits value to device */
+ typedef int(*drx_read_reg32func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 addr, /* address of register/memory */
+ u32 *data, /* receive buffer */
+ u32 flags);
+
+/* Read modify write 32-bits value to device */
+ typedef int(*drx_read_modify_write_reg32func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */
+ u32 waddr, /* write address of register */
+ u32 raddr, /* read address of register */
+ u32 wdata, /* data to write */
+ u32 *rdata); /* data to read */
+
+/*
+* \struct struct drx_access_func * \brief Interface to an access protocol.
+*/
+struct drx_access_func {
+ drx_write_block_func_t write_block_func;
+ drx_read_block_func_t read_block_func;
+ drx_write_reg8func_t write_reg8func;
+ drx_read_reg8func_t read_reg8func;
+ drx_read_modify_write_reg8func_t read_modify_write_reg8func;
+ drx_write_reg16func_t write_reg16func;
+ drx_read_reg16func_t read_reg16func;
+ drx_read_modify_write_reg16func_t read_modify_write_reg16func;
+ drx_write_reg32func_t write_reg32func;
+ drx_read_reg32func_t read_reg32func;
+ drx_read_modify_write_reg32func_t read_modify_write_reg32func;
+};
+
+/* Register address and data for register dump function */
+struct drx_reg_dump {
+ u32 address;
+ u32 data;
+};
+
+/*============================================================================*/
+/*============================================================================*/
+/*== Demod instance data structures ==========================================*/
+/*============================================================================*/
+/*============================================================================*/
+
+/*
+* \struct struct drx_common_attr * \brief Set of common attributes, shared by all DRX devices.
+*/
+ struct drx_common_attr {
+ /* Microcode (firmware) attributes */
+ char *microcode_file; /*< microcode filename */
+ bool verify_microcode;
+ /*< Use microcode verify or not. */
+ struct drx_mc_version_rec mcversion;
+ /*< Version record of microcode from file */
+
+ /* Clocks and tuner attributes */
+ s32 intermediate_freq;
+ /*< IF,if tuner instance not used. (kHz)*/
+ s32 sys_clock_freq;
+ /*< Systemclock frequency. (kHz) */
+ s32 osc_clock_freq;
+ /*< Oscillator clock frequency. (kHz) */
+ s16 osc_clock_deviation;
+ /*< Oscillator clock deviation. (ppm) */
+ bool mirror_freq_spect;
+ /*< Mirror IF frequency spectrum or not.*/
+
+ /* Initial MPEG output attributes */
+ struct drx_cfg_mpeg_output mpeg_cfg;
+ /*< MPEG configuration */
+
+ bool is_opened; /*< if true instance is already opened. */
+
+ /* Channel scan */
+ struct drx_scan_param *scan_param;
+ /*< scan parameters */
+ u16 scan_freq_plan_index;
+ /*< next index in freq plan */
+ s32 scan_next_frequency;
+ /*< next freq to scan */
+ bool scan_ready; /*< scan ready flag */
+ u32 scan_max_channels;/*< number of channels in freqplan */
+ u32 scan_channels_scanned;
+ /*< number of channels scanned */
+ /* Channel scan - inner loop: demod related */
+ drx_scan_func_t scan_function;
+ /*< function to check channel */
+ /* Channel scan - inner loop: SYSObj related */
+ void *scan_context; /*< Context Pointer of SYSObj */
+ /* Channel scan - parameters for default DTV scan function in core driver */
+ u16 scan_demod_lock_timeout;
+ /*< millisecs to wait for lock */
+ enum drx_lock_status scan_desired_lock;
+ /*< lock requirement for channel found */
+ /* scan_active can be used by SetChannel to decide how to program the tuner,
+ fast or slow (but stable). Usually fast during scan. */
+ bool scan_active; /*< true when scan routines are active */
+
+ /* Power management */
+ enum drx_power_mode current_power_mode;
+ /*< current power management mode */
+
+ /* Tuner */
+ u8 tuner_port_nr; /*< nr of I2C port to which tuner is */
+ s32 tuner_min_freq_rf;
+ /*< minimum RF input frequency, in kHz */
+ s32 tuner_max_freq_rf;
+ /*< maximum RF input frequency, in kHz */
+ bool tuner_rf_agc_pol; /*< if true invert RF AGC polarity */
+ bool tuner_if_agc_pol; /*< if true invert IF AGC polarity */
+ bool tuner_slow_mode; /*< if true invert IF AGC polarity */
+
+ struct drx_channel current_channel;
+ /*< current channel parameters */
+ enum drx_standard current_standard;
+ /*< current standard selection */
+ enum drx_standard prev_standard;
+ /*< previous standard selection */
+ enum drx_standard di_cache_standard;
+ /*< standard in DI cache if available */
+ bool use_bootloader; /*< use bootloader in open */
+ u32 capabilities; /*< capabilities flags */
+ u32 product_id; /*< product ID inc. metal fix number */};
+
+/*
+* Generic functions for DRX devices.
+*/
+
+struct drx_demod_instance;
+
+/*
+* \struct struct drx_demod_instance * \brief Top structure of demodulator instance.
+*/
+struct drx_demod_instance {
+ /*< data access protocol functions */
+ struct i2c_device_addr *my_i2c_dev_addr;
+ /*< i2c address and device identifier */
+ struct drx_common_attr *my_common_attr;
+ /*< common DRX attributes */
+ void *my_ext_attr; /*< device specific attributes */
+ /* generic demodulator data */
+
+ struct i2c_adapter *i2c;
+ const struct firmware *firmware;
+};
+
+/*-------------------------------------------------------------------------
+MACROS
+Conversion from enum values to human readable form.
+-------------------------------------------------------------------------*/
+
+/* standard */
+
+#define DRX_STR_STANDARD(x) ( \
+ (x == DRX_STANDARD_DVBT) ? "DVB-T" : \
+ (x == DRX_STANDARD_8VSB) ? "8VSB" : \
+ (x == DRX_STANDARD_NTSC) ? "NTSC" : \
+ (x == DRX_STANDARD_PAL_SECAM_BG) ? "PAL/SECAM B/G" : \
+ (x == DRX_STANDARD_PAL_SECAM_DK) ? "PAL/SECAM D/K" : \
+ (x == DRX_STANDARD_PAL_SECAM_I) ? "PAL/SECAM I" : \
+ (x == DRX_STANDARD_PAL_SECAM_L) ? "PAL/SECAM L" : \
+ (x == DRX_STANDARD_PAL_SECAM_LP) ? "PAL/SECAM LP" : \
+ (x == DRX_STANDARD_ITU_A) ? "ITU-A" : \
+ (x == DRX_STANDARD_ITU_B) ? "ITU-B" : \
+ (x == DRX_STANDARD_ITU_C) ? "ITU-C" : \
+ (x == DRX_STANDARD_ITU_D) ? "ITU-D" : \
+ (x == DRX_STANDARD_FM) ? "FM" : \
+ (x == DRX_STANDARD_DTMB) ? "DTMB" : \
+ (x == DRX_STANDARD_AUTO) ? "Auto" : \
+ (x == DRX_STANDARD_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+
+/* channel */
+
+#define DRX_STR_BANDWIDTH(x) ( \
+ (x == DRX_BANDWIDTH_8MHZ) ? "8 MHz" : \
+ (x == DRX_BANDWIDTH_7MHZ) ? "7 MHz" : \
+ (x == DRX_BANDWIDTH_6MHZ) ? "6 MHz" : \
+ (x == DRX_BANDWIDTH_AUTO) ? "Auto" : \
+ (x == DRX_BANDWIDTH_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+#define DRX_STR_FFTMODE(x) ( \
+ (x == DRX_FFTMODE_2K) ? "2k" : \
+ (x == DRX_FFTMODE_4K) ? "4k" : \
+ (x == DRX_FFTMODE_8K) ? "8k" : \
+ (x == DRX_FFTMODE_AUTO) ? "Auto" : \
+ (x == DRX_FFTMODE_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+#define DRX_STR_GUARD(x) ( \
+ (x == DRX_GUARD_1DIV32) ? "1/32nd" : \
+ (x == DRX_GUARD_1DIV16) ? "1/16th" : \
+ (x == DRX_GUARD_1DIV8) ? "1/8th" : \
+ (x == DRX_GUARD_1DIV4) ? "1/4th" : \
+ (x == DRX_GUARD_AUTO) ? "Auto" : \
+ (x == DRX_GUARD_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+#define DRX_STR_CONSTELLATION(x) ( \
+ (x == DRX_CONSTELLATION_BPSK) ? "BPSK" : \
+ (x == DRX_CONSTELLATION_QPSK) ? "QPSK" : \
+ (x == DRX_CONSTELLATION_PSK8) ? "PSK8" : \
+ (x == DRX_CONSTELLATION_QAM16) ? "QAM16" : \
+ (x == DRX_CONSTELLATION_QAM32) ? "QAM32" : \
+ (x == DRX_CONSTELLATION_QAM64) ? "QAM64" : \
+ (x == DRX_CONSTELLATION_QAM128) ? "QAM128" : \
+ (x == DRX_CONSTELLATION_QAM256) ? "QAM256" : \
+ (x == DRX_CONSTELLATION_QAM512) ? "QAM512" : \
+ (x == DRX_CONSTELLATION_QAM1024) ? "QAM1024" : \
+ (x == DRX_CONSTELLATION_QPSK_NR) ? "QPSK_NR" : \
+ (x == DRX_CONSTELLATION_AUTO) ? "Auto" : \
+ (x == DRX_CONSTELLATION_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+#define DRX_STR_CODERATE(x) ( \
+ (x == DRX_CODERATE_1DIV2) ? "1/2nd" : \
+ (x == DRX_CODERATE_2DIV3) ? "2/3rd" : \
+ (x == DRX_CODERATE_3DIV4) ? "3/4th" : \
+ (x == DRX_CODERATE_5DIV6) ? "5/6th" : \
+ (x == DRX_CODERATE_7DIV8) ? "7/8th" : \
+ (x == DRX_CODERATE_AUTO) ? "Auto" : \
+ (x == DRX_CODERATE_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+#define DRX_STR_HIERARCHY(x) ( \
+ (x == DRX_HIERARCHY_NONE) ? "None" : \
+ (x == DRX_HIERARCHY_ALPHA1) ? "Alpha=1" : \
+ (x == DRX_HIERARCHY_ALPHA2) ? "Alpha=2" : \
+ (x == DRX_HIERARCHY_ALPHA4) ? "Alpha=4" : \
+ (x == DRX_HIERARCHY_AUTO) ? "Auto" : \
+ (x == DRX_HIERARCHY_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+#define DRX_STR_PRIORITY(x) ( \
+ (x == DRX_PRIORITY_LOW) ? "Low" : \
+ (x == DRX_PRIORITY_HIGH) ? "High" : \
+ (x == DRX_PRIORITY_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+#define DRX_STR_MIRROR(x) ( \
+ (x == DRX_MIRROR_NO) ? "Normal" : \
+ (x == DRX_MIRROR_YES) ? "Mirrored" : \
+ (x == DRX_MIRROR_AUTO) ? "Auto" : \
+ (x == DRX_MIRROR_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+#define DRX_STR_CLASSIFICATION(x) ( \
+ (x == DRX_CLASSIFICATION_GAUSS) ? "Gaussion" : \
+ (x == DRX_CLASSIFICATION_HVY_GAUSS) ? "Heavy Gaussion" : \
+ (x == DRX_CLASSIFICATION_COCHANNEL) ? "Co-channel" : \
+ (x == DRX_CLASSIFICATION_STATIC) ? "Static echo" : \
+ (x == DRX_CLASSIFICATION_MOVING) ? "Moving echo" : \
+ (x == DRX_CLASSIFICATION_ZERODB) ? "Zero dB echo" : \
+ (x == DRX_CLASSIFICATION_UNKNOWN) ? "Unknown" : \
+ (x == DRX_CLASSIFICATION_AUTO) ? "Auto" : \
+ "(Invalid)")
+
+#define DRX_STR_INTERLEAVEMODE(x) ( \
+ (x == DRX_INTERLEAVEMODE_I128_J1) ? "I128_J1" : \
+ (x == DRX_INTERLEAVEMODE_I128_J1_V2) ? "I128_J1_V2" : \
+ (x == DRX_INTERLEAVEMODE_I128_J2) ? "I128_J2" : \
+ (x == DRX_INTERLEAVEMODE_I64_J2) ? "I64_J2" : \
+ (x == DRX_INTERLEAVEMODE_I128_J3) ? "I128_J3" : \
+ (x == DRX_INTERLEAVEMODE_I32_J4) ? "I32_J4" : \
+ (x == DRX_INTERLEAVEMODE_I128_J4) ? "I128_J4" : \
+ (x == DRX_INTERLEAVEMODE_I16_J8) ? "I16_J8" : \
+ (x == DRX_INTERLEAVEMODE_I128_J5) ? "I128_J5" : \
+ (x == DRX_INTERLEAVEMODE_I8_J16) ? "I8_J16" : \
+ (x == DRX_INTERLEAVEMODE_I128_J6) ? "I128_J6" : \
+ (x == DRX_INTERLEAVEMODE_RESERVED_11) ? "Reserved 11" : \
+ (x == DRX_INTERLEAVEMODE_I128_J7) ? "I128_J7" : \
+ (x == DRX_INTERLEAVEMODE_RESERVED_13) ? "Reserved 13" : \
+ (x == DRX_INTERLEAVEMODE_I128_J8) ? "I128_J8" : \
+ (x == DRX_INTERLEAVEMODE_RESERVED_15) ? "Reserved 15" : \
+ (x == DRX_INTERLEAVEMODE_I12_J17) ? "I12_J17" : \
+ (x == DRX_INTERLEAVEMODE_I5_J4) ? "I5_J4" : \
+ (x == DRX_INTERLEAVEMODE_B52_M240) ? "B52_M240" : \
+ (x == DRX_INTERLEAVEMODE_B52_M720) ? "B52_M720" : \
+ (x == DRX_INTERLEAVEMODE_B52_M48) ? "B52_M48" : \
+ (x == DRX_INTERLEAVEMODE_B52_M0) ? "B52_M0" : \
+ (x == DRX_INTERLEAVEMODE_UNKNOWN) ? "Unknown" : \
+ (x == DRX_INTERLEAVEMODE_AUTO) ? "Auto" : \
+ "(Invalid)")
+
+#define DRX_STR_LDPC(x) ( \
+ (x == DRX_LDPC_0_4) ? "0.4" : \
+ (x == DRX_LDPC_0_6) ? "0.6" : \
+ (x == DRX_LDPC_0_8) ? "0.8" : \
+ (x == DRX_LDPC_AUTO) ? "Auto" : \
+ (x == DRX_LDPC_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+
+#define DRX_STR_CARRIER(x) ( \
+ (x == DRX_CARRIER_MULTI) ? "Multi" : \
+ (x == DRX_CARRIER_SINGLE) ? "Single" : \
+ (x == DRX_CARRIER_AUTO) ? "Auto" : \
+ (x == DRX_CARRIER_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+
+#define DRX_STR_FRAMEMODE(x) ( \
+ (x == DRX_FRAMEMODE_420) ? "420" : \
+ (x == DRX_FRAMEMODE_595) ? "595" : \
+ (x == DRX_FRAMEMODE_945) ? "945" : \
+ (x == DRX_FRAMEMODE_420_FIXED_PN) ? "420 with fixed PN" : \
+ (x == DRX_FRAMEMODE_945_FIXED_PN) ? "945 with fixed PN" : \
+ (x == DRX_FRAMEMODE_AUTO) ? "Auto" : \
+ (x == DRX_FRAMEMODE_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+
+#define DRX_STR_PILOT(x) ( \
+ (x == DRX_PILOT_ON) ? "On" : \
+ (x == DRX_PILOT_OFF) ? "Off" : \
+ (x == DRX_PILOT_AUTO) ? "Auto" : \
+ (x == DRX_PILOT_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+/* TPS */
+
+#define DRX_STR_TPS_FRAME(x) ( \
+ (x == DRX_TPS_FRAME1) ? "Frame1" : \
+ (x == DRX_TPS_FRAME2) ? "Frame2" : \
+ (x == DRX_TPS_FRAME3) ? "Frame3" : \
+ (x == DRX_TPS_FRAME4) ? "Frame4" : \
+ (x == DRX_TPS_FRAME_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+
+/* lock status */
+
+#define DRX_STR_LOCKSTATUS(x) ( \
+ (x == DRX_NEVER_LOCK) ? "Never" : \
+ (x == DRX_NOT_LOCKED) ? "No" : \
+ (x == DRX_LOCKED) ? "Locked" : \
+ (x == DRX_LOCK_STATE_1) ? "Lock state 1" : \
+ (x == DRX_LOCK_STATE_2) ? "Lock state 2" : \
+ (x == DRX_LOCK_STATE_3) ? "Lock state 3" : \
+ (x == DRX_LOCK_STATE_4) ? "Lock state 4" : \
+ (x == DRX_LOCK_STATE_5) ? "Lock state 5" : \
+ (x == DRX_LOCK_STATE_6) ? "Lock state 6" : \
+ (x == DRX_LOCK_STATE_7) ? "Lock state 7" : \
+ (x == DRX_LOCK_STATE_8) ? "Lock state 8" : \
+ (x == DRX_LOCK_STATE_9) ? "Lock state 9" : \
+ "(Invalid)")
+
+/* version information , modules */
+#define DRX_STR_MODULE(x) ( \
+ (x == DRX_MODULE_DEVICE) ? "Device" : \
+ (x == DRX_MODULE_MICROCODE) ? "Microcode" : \
+ (x == DRX_MODULE_DRIVERCORE) ? "CoreDriver" : \
+ (x == DRX_MODULE_DEVICEDRIVER) ? "DeviceDriver" : \
+ (x == DRX_MODULE_BSP_I2C) ? "BSP I2C" : \
+ (x == DRX_MODULE_BSP_TUNER) ? "BSP Tuner" : \
+ (x == DRX_MODULE_BSP_HOST) ? "BSP Host" : \
+ (x == DRX_MODULE_DAP) ? "Data Access Protocol" : \
+ (x == DRX_MODULE_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+
+#define DRX_STR_POWER_MODE(x) ( \
+ (x == DRX_POWER_UP) ? "DRX_POWER_UP " : \
+ (x == DRX_POWER_MODE_1) ? "DRX_POWER_MODE_1" : \
+ (x == DRX_POWER_MODE_2) ? "DRX_POWER_MODE_2" : \
+ (x == DRX_POWER_MODE_3) ? "DRX_POWER_MODE_3" : \
+ (x == DRX_POWER_MODE_4) ? "DRX_POWER_MODE_4" : \
+ (x == DRX_POWER_MODE_5) ? "DRX_POWER_MODE_5" : \
+ (x == DRX_POWER_MODE_6) ? "DRX_POWER_MODE_6" : \
+ (x == DRX_POWER_MODE_7) ? "DRX_POWER_MODE_7" : \
+ (x == DRX_POWER_MODE_8) ? "DRX_POWER_MODE_8" : \
+ (x == DRX_POWER_MODE_9) ? "DRX_POWER_MODE_9" : \
+ (x == DRX_POWER_MODE_10) ? "DRX_POWER_MODE_10" : \
+ (x == DRX_POWER_MODE_11) ? "DRX_POWER_MODE_11" : \
+ (x == DRX_POWER_MODE_12) ? "DRX_POWER_MODE_12" : \
+ (x == DRX_POWER_MODE_13) ? "DRX_POWER_MODE_13" : \
+ (x == DRX_POWER_MODE_14) ? "DRX_POWER_MODE_14" : \
+ (x == DRX_POWER_MODE_15) ? "DRX_POWER_MODE_15" : \
+ (x == DRX_POWER_MODE_16) ? "DRX_POWER_MODE_16" : \
+ (x == DRX_POWER_DOWN) ? "DRX_POWER_DOWN " : \
+ "(Invalid)")
+
+#define DRX_STR_OOB_STANDARD(x) ( \
+ (x == DRX_OOB_MODE_A) ? "ANSI 55-1 " : \
+ (x == DRX_OOB_MODE_B_GRADE_A) ? "ANSI 55-2 A" : \
+ (x == DRX_OOB_MODE_B_GRADE_B) ? "ANSI 55-2 B" : \
+ "(Invalid)")
+
+#define DRX_STR_AUD_STANDARD(x) ( \
+ (x == DRX_AUD_STANDARD_BTSC) ? "BTSC" : \
+ (x == DRX_AUD_STANDARD_A2) ? "A2" : \
+ (x == DRX_AUD_STANDARD_EIAJ) ? "EIAJ" : \
+ (x == DRX_AUD_STANDARD_FM_STEREO) ? "FM Stereo" : \
+ (x == DRX_AUD_STANDARD_AUTO) ? "Auto" : \
+ (x == DRX_AUD_STANDARD_M_MONO) ? "M-Standard Mono" : \
+ (x == DRX_AUD_STANDARD_D_K_MONO) ? "D/K Mono FM" : \
+ (x == DRX_AUD_STANDARD_BG_FM) ? "B/G-Dual Carrier FM (A2)" : \
+ (x == DRX_AUD_STANDARD_D_K1) ? "D/K1-Dual Carrier FM" : \
+ (x == DRX_AUD_STANDARD_D_K2) ? "D/K2-Dual Carrier FM" : \
+ (x == DRX_AUD_STANDARD_D_K3) ? "D/K3-Dual Carrier FM" : \
+ (x == DRX_AUD_STANDARD_BG_NICAM_FM) ? "B/G-NICAM-FM" : \
+ (x == DRX_AUD_STANDARD_L_NICAM_AM) ? "L-NICAM-AM" : \
+ (x == DRX_AUD_STANDARD_I_NICAM_FM) ? "I-NICAM-FM" : \
+ (x == DRX_AUD_STANDARD_D_K_NICAM_FM) ? "D/K-NICAM-FM" : \
+ (x == DRX_AUD_STANDARD_UNKNOWN) ? "Unknown" : \
+ "(Invalid)")
+#define DRX_STR_AUD_STEREO(x) ( \
+ (x == true) ? "Stereo" : \
+ (x == false) ? "Mono" : \
+ "(Invalid)")
+
+#define DRX_STR_AUD_SAP(x) ( \
+ (x == true) ? "Present" : \
+ (x == false) ? "Not present" : \
+ "(Invalid)")
+
+#define DRX_STR_AUD_CARRIER(x) ( \
+ (x == true) ? "Present" : \
+ (x == false) ? "Not present" : \
+ "(Invalid)")
+
+#define DRX_STR_AUD_RDS(x) ( \
+ (x == true) ? "Available" : \
+ (x == false) ? "Not Available" : \
+ "(Invalid)")
+
+#define DRX_STR_AUD_NICAM_STATUS(x) ( \
+ (x == DRX_AUD_NICAM_DETECTED) ? "Detected" : \
+ (x == DRX_AUD_NICAM_NOT_DETECTED) ? "Not detected" : \
+ (x == DRX_AUD_NICAM_BAD) ? "Bad" : \
+ "(Invalid)")
+
+#define DRX_STR_RDS_VALID(x) ( \
+ (x == true) ? "Valid" : \
+ (x == false) ? "Not Valid" : \
+ "(Invalid)")
+
+/*-------------------------------------------------------------------------
+Access macros
+-------------------------------------------------------------------------*/
+
+/*
+* \brief Create a compilable reference to the microcode attribute
+* \param d pointer to demod instance
+*
+* Used as main reference to an attribute field.
+* Used by both macro implementation and function implementation.
+* These macros are defined to avoid duplication of code in macro and function
+* definitions that handle access of demod common or extended attributes.
+*
+*/
+
+#define DRX_ATTR_MCRECORD(d) ((d)->my_common_attr->mcversion)
+#define DRX_ATTR_MIRRORFREQSPECT(d) ((d)->my_common_attr->mirror_freq_spect)
+#define DRX_ATTR_CURRENTPOWERMODE(d)((d)->my_common_attr->current_power_mode)
+#define DRX_ATTR_ISOPENED(d) ((d)->my_common_attr->is_opened)
+#define DRX_ATTR_USEBOOTLOADER(d) ((d)->my_common_attr->use_bootloader)
+#define DRX_ATTR_CURRENTSTANDARD(d) ((d)->my_common_attr->current_standard)
+#define DRX_ATTR_PREVSTANDARD(d) ((d)->my_common_attr->prev_standard)
+#define DRX_ATTR_CACHESTANDARD(d) ((d)->my_common_attr->di_cache_standard)
+#define DRX_ATTR_CURRENTCHANNEL(d) ((d)->my_common_attr->current_channel)
+#define DRX_ATTR_MICROCODE(d) ((d)->my_common_attr->microcode)
+#define DRX_ATTR_VERIFYMICROCODE(d) ((d)->my_common_attr->verify_microcode)
+#define DRX_ATTR_CAPABILITIES(d) ((d)->my_common_attr->capabilities)
+#define DRX_ATTR_PRODUCTID(d) ((d)->my_common_attr->product_id)
+#define DRX_ATTR_INTERMEDIATEFREQ(d) ((d)->my_common_attr->intermediate_freq)
+#define DRX_ATTR_SYSCLOCKFREQ(d) ((d)->my_common_attr->sys_clock_freq)
+#define DRX_ATTR_TUNERRFAGCPOL(d) ((d)->my_common_attr->tuner_rf_agc_pol)
+#define DRX_ATTR_TUNERIFAGCPOL(d) ((d)->my_common_attr->tuner_if_agc_pol)
+#define DRX_ATTR_TUNERSLOWMODE(d) ((d)->my_common_attr->tuner_slow_mode)
+#define DRX_ATTR_TUNERSPORTNR(d) ((d)->my_common_attr->tuner_port_nr)
+#define DRX_ATTR_I2CADDR(d) ((d)->my_i2c_dev_addr->i2c_addr)
+#define DRX_ATTR_I2CDEVID(d) ((d)->my_i2c_dev_addr->i2c_dev_id)
+#define DRX_ISMCVERTYPE(x) ((x) == AUX_VER_RECORD)
+
+/*************************/
+
+/* Macros with device-specific handling are converted to CFG functions */
+
+#define DRX_ACCESSMACRO_SET(demod, value, cfg_name, data_type) \
+ do { \
+ struct drx_cfg config; \
+ data_type cfg_data; \
+ config.cfg_type = cfg_name; \
+ config.cfg_data = &cfg_data; \
+ cfg_data = value; \
+ drx_ctrl(demod, DRX_CTRL_SET_CFG, &config); \
+ } while (0)
+
+#define DRX_ACCESSMACRO_GET(demod, value, cfg_name, data_type, error_value) \
+ do { \
+ int cfg_status; \
+ struct drx_cfg config; \
+ data_type cfg_data; \
+ config.cfg_type = cfg_name; \
+ config.cfg_data = &cfg_data; \
+ cfg_status = drx_ctrl(demod, DRX_CTRL_GET_CFG, &config); \
+ if (cfg_status == 0) { \
+ value = cfg_data; \
+ } else { \
+ value = (data_type)error_value; \
+ } \
+ } while (0)
+
+/* Configuration functions for usage by Access (XS) Macros */
+
+#ifndef DRX_XS_CFG_BASE
+#define DRX_XS_CFG_BASE (500)
+#endif
+
+#define DRX_XS_CFG_PRESET (DRX_XS_CFG_BASE + 0)
+#define DRX_XS_CFG_AUD_BTSC_DETECT (DRX_XS_CFG_BASE + 1)
+#define DRX_XS_CFG_QAM_LOCKRANGE (DRX_XS_CFG_BASE + 2)
+
+/* Access Macros with device-specific handling */
+
+#define DRX_SET_PRESET(d, x) \
+ DRX_ACCESSMACRO_SET((d), (x), DRX_XS_CFG_PRESET, char*)
+#define DRX_GET_PRESET(d, x) \
+ DRX_ACCESSMACRO_GET((d), (x), DRX_XS_CFG_PRESET, char*, "ERROR")
+
+#define DRX_SET_AUD_BTSC_DETECT(d, x) DRX_ACCESSMACRO_SET((d), (x), \
+ DRX_XS_CFG_AUD_BTSC_DETECT, enum drx_aud_btsc_detect)
+#define DRX_GET_AUD_BTSC_DETECT(d, x) DRX_ACCESSMACRO_GET((d), (x), \
+ DRX_XS_CFG_AUD_BTSC_DETECT, enum drx_aud_btsc_detect, DRX_UNKNOWN)
+
+#define DRX_SET_QAM_LOCKRANGE(d, x) DRX_ACCESSMACRO_SET((d), (x), \
+ DRX_XS_CFG_QAM_LOCKRANGE, enum drx_qam_lock_range)
+#define DRX_GET_QAM_LOCKRANGE(d, x) DRX_ACCESSMACRO_GET((d), (x), \
+ DRX_XS_CFG_QAM_LOCKRANGE, enum drx_qam_lock_range, DRX_UNKNOWN)
+
+/*
+* \brief Macro to check if std is an ATV standard
+* \retval true std is an ATV standard
+* \retval false std is an ATV standard
+*/
+#define DRX_ISATVSTD(std) (((std) == DRX_STANDARD_PAL_SECAM_BG) || \
+ ((std) == DRX_STANDARD_PAL_SECAM_DK) || \
+ ((std) == DRX_STANDARD_PAL_SECAM_I) || \
+ ((std) == DRX_STANDARD_PAL_SECAM_L) || \
+ ((std) == DRX_STANDARD_PAL_SECAM_LP) || \
+ ((std) == DRX_STANDARD_NTSC) || \
+ ((std) == DRX_STANDARD_FM))
+
+/*
+* \brief Macro to check if std is an QAM standard
+* \retval true std is an QAM standards
+* \retval false std is an QAM standards
+*/
+#define DRX_ISQAMSTD(std) (((std) == DRX_STANDARD_ITU_A) || \
+ ((std) == DRX_STANDARD_ITU_B) || \
+ ((std) == DRX_STANDARD_ITU_C) || \
+ ((std) == DRX_STANDARD_ITU_D))
+
+/*
+* \brief Macro to check if std is VSB standard
+* \retval true std is VSB standard
+* \retval false std is not VSB standard
+*/
+#define DRX_ISVSBSTD(std) ((std) == DRX_STANDARD_8VSB)
+
+/*
+* \brief Macro to check if std is DVBT standard
+* \retval true std is DVBT standard
+* \retval false std is not DVBT standard
+*/
+#define DRX_ISDVBTSTD(std) ((std) == DRX_STANDARD_DVBT)
+
+/*-------------------------------------------------------------------------
+THE END
+-------------------------------------------------------------------------*/
+#endif /* __DRXDRIVER_H__ */