diff options
Diffstat (limited to 'drivers/media/pci/tw68/tw68-core.c')
| -rw-r--r-- | drivers/media/pci/tw68/tw68-core.c | 418 |
1 files changed, 418 insertions, 0 deletions
diff --git a/drivers/media/pci/tw68/tw68-core.c b/drivers/media/pci/tw68/tw68-core.c new file mode 100644 index 000000000..35dd19b24 --- /dev/null +++ b/drivers/media/pci/tw68/tw68-core.c @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * tw68-core.c + * Core functions for the Techwell 68xx driver + * + * Much of this code is derived from the cx88 and sa7134 drivers, which + * were in turn derived from the bt87x driver. The original work was by + * Gerd Knorr; more recently the code was enhanced by Mauro Carvalho Chehab, + * Hans Verkuil, Andy Walls and many others. Their work is gratefully + * acknowledged. Full credit goes to them - any problems within this code + * are mine. + * + * Copyright (C) 2009 William M. Brack + * + * Refactored and updated to the latest v4l core frameworks: + * + * Copyright (C) 2014 Hans Verkuil <hverkuil@xs4all.nl> + */ + +#include <linux/init.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/kmod.h> +#include <linux/sound.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/dma-mapping.h> +#include <linux/pci_ids.h> +#include <linux/pm.h> + +#include <media/v4l2-dev.h> +#include "tw68.h" +#include "tw68-reg.h" + +MODULE_DESCRIPTION("v4l2 driver module for tw6800 based video capture cards"); +MODULE_AUTHOR("William M. Brack"); +MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>"); +MODULE_LICENSE("GPL"); + +static unsigned int latency = UNSET; +module_param(latency, int, 0444); +MODULE_PARM_DESC(latency, "pci latency timer"); + +static unsigned int video_nr[] = {[0 ... (TW68_MAXBOARDS - 1)] = UNSET }; +module_param_array(video_nr, int, NULL, 0444); +MODULE_PARM_DESC(video_nr, "video device number"); + +static unsigned int card[] = {[0 ... (TW68_MAXBOARDS - 1)] = UNSET }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "card type"); + +static atomic_t tw68_instance = ATOMIC_INIT(0); + +/* ------------------------------------------------------------------ */ + +/* + * Please add any new PCI IDs to: https://pci-ids.ucw.cz. This keeps + * the PCI ID database up to date. Note that the entries must be + * added under vendor 0x1797 (Techwell Inc.) as subsystem IDs. + */ +static const struct pci_device_id tw68_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_TECHWELL_6800)}, + {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_TECHWELL_6801)}, + {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_TECHWELL_6804)}, + {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_TECHWELL_6816_1)}, + {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_TECHWELL_6816_2)}, + {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_TECHWELL_6816_3)}, + {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_TECHWELL_6816_4)}, + {0,} +}; + +/* ------------------------------------------------------------------ */ + + +/* + * The device is given a "soft reset". According to the specifications, + * after this "all register content remain unchanged", so we also write + * to all specified registers manually as well (mostly to manufacturer's + * specified reset values) + */ +static int tw68_hw_init1(struct tw68_dev *dev) +{ + /* Assure all interrupts are disabled */ + tw_writel(TW68_INTMASK, 0); /* 020 */ + /* Clear any pending interrupts */ + tw_writel(TW68_INTSTAT, 0xffffffff); /* 01C */ + /* Stop risc processor, set default buffer level */ + tw_writel(TW68_DMAC, 0x1600); + + tw_writeb(TW68_ACNTL, 0x80); /* 218 soft reset */ + msleep(100); + + tw_writeb(TW68_INFORM, 0x40); /* 208 mux0, 27mhz xtal */ + tw_writeb(TW68_OPFORM, 0x04); /* 20C analog line-lock */ + tw_writeb(TW68_HSYNC, 0); /* 210 color-killer high sens */ + tw_writeb(TW68_ACNTL, 0x42); /* 218 int vref #2, chroma adc off */ + + tw_writeb(TW68_CROP_HI, 0x02); /* 21C Hactive m.s. bits */ + tw_writeb(TW68_VDELAY_LO, 0x12);/* 220 Mfg specified reset value */ + tw_writeb(TW68_VACTIVE_LO, 0xf0); + tw_writeb(TW68_HDELAY_LO, 0x0f); + tw_writeb(TW68_HACTIVE_LO, 0xd0); + + tw_writeb(TW68_CNTRL1, 0xcd); /* 230 Wide Chroma BPF B/W + * Secam reduction, Adap comb for + * NTSC, Op Mode 1 */ + + tw_writeb(TW68_VSCALE_LO, 0); /* 234 */ + tw_writeb(TW68_SCALE_HI, 0x11); /* 238 */ + tw_writeb(TW68_HSCALE_LO, 0); /* 23c */ + tw_writeb(TW68_BRIGHT, 0); /* 240 */ + tw_writeb(TW68_CONTRAST, 0x5c); /* 244 */ + tw_writeb(TW68_SHARPNESS, 0x51);/* 248 */ + tw_writeb(TW68_SAT_U, 0x80); /* 24C */ + tw_writeb(TW68_SAT_V, 0x80); /* 250 */ + tw_writeb(TW68_HUE, 0x00); /* 254 */ + + /* TODO - Check that none of these are set by control defaults */ + tw_writeb(TW68_SHARP2, 0x53); /* 258 Mfg specified reset val */ + tw_writeb(TW68_VSHARP, 0x80); /* 25C Sharpness Coring val 8 */ + tw_writeb(TW68_CORING, 0x44); /* 260 CTI and Vert Peak coring */ + tw_writeb(TW68_CNTRL2, 0x00); /* 268 No power saving enabled */ + tw_writeb(TW68_SDT, 0x07); /* 270 Enable shadow reg, auto-det */ + tw_writeb(TW68_SDTR, 0x7f); /* 274 All stds recog, don't start */ + tw_writeb(TW68_CLMPG, 0x50); /* 280 Clamp end at 40 sys clocks */ + tw_writeb(TW68_IAGC, 0x22); /* 284 Mfg specified reset val */ + tw_writeb(TW68_AGCGAIN, 0xf0); /* 288 AGC gain when loop disabled */ + tw_writeb(TW68_PEAKWT, 0xd8); /* 28C White peak threshold */ + tw_writeb(TW68_CLMPL, 0x3c); /* 290 Y channel clamp level */ +/* tw_writeb(TW68_SYNCT, 0x38);*/ /* 294 Sync amplitude */ + tw_writeb(TW68_SYNCT, 0x30); /* 294 Sync amplitude */ + tw_writeb(TW68_MISSCNT, 0x44); /* 298 Horiz sync, VCR detect sens */ + tw_writeb(TW68_PCLAMP, 0x28); /* 29C Clamp pos from PLL sync */ + /* Bit DETV of VCNTL1 helps sync multi cams/chip board */ + tw_writeb(TW68_VCNTL1, 0x04); /* 2A0 */ + tw_writeb(TW68_VCNTL2, 0); /* 2A4 */ + tw_writeb(TW68_CKILL, 0x68); /* 2A8 Mfg specified reset val */ + tw_writeb(TW68_COMB, 0x44); /* 2AC Mfg specified reset val */ + tw_writeb(TW68_LDLY, 0x30); /* 2B0 Max positive luma delay */ + tw_writeb(TW68_MISC1, 0x14); /* 2B4 Mfg specified reset val */ + tw_writeb(TW68_LOOP, 0xa5); /* 2B8 Mfg specified reset val */ + tw_writeb(TW68_MISC2, 0xe0); /* 2BC Enable colour killer */ + tw_writeb(TW68_MVSN, 0); /* 2C0 */ + tw_writeb(TW68_CLMD, 0x05); /* 2CC slice level auto, clamp med. */ + tw_writeb(TW68_IDCNTL, 0); /* 2D0 Writing zero to this register + * selects NTSC ID detection, + * but doesn't change the + * sensitivity (which has a reset + * value of 1E). Since we are + * not doing auto-detection, it + * has no real effect */ + tw_writeb(TW68_CLCNTL1, 0); /* 2D4 */ + tw_writel(TW68_VBIC, 0x03); /* 010 */ + tw_writel(TW68_CAP_CTL, 0x03); /* 040 Enable both even & odd flds */ + tw_writel(TW68_DMAC, 0x2000); /* patch set had 0x2080 */ + tw_writel(TW68_TESTREG, 0); /* 02C */ + + /* + * Some common boards, especially inexpensive single-chip models, + * use the GPIO bits 0-3 to control an on-board video-output mux. + * For these boards, we need to set up the GPIO register into + * "normal" mode, set bits 0-3 as output, and then set those bits + * zero. + * + * Eventually, it would be nice if we could identify these boards + * uniquely, and only do this initialisation if the board has been + * identify. For the moment, however, it shouldn't hurt anything + * to do these steps. + */ + tw_writel(TW68_GPIOC, 0); /* Set the GPIO to "normal", no ints */ + tw_writel(TW68_GPOE, 0x0f); /* Set bits 0-3 to "output" */ + tw_writel(TW68_GPDATA, 0); /* Set all bits to low state */ + + /* Initialize the device control structures */ + mutex_init(&dev->lock); + spin_lock_init(&dev->slock); + + /* Initialize any subsystems */ + tw68_video_init1(dev); + return 0; +} + +static irqreturn_t tw68_irq(int irq, void *dev_id) +{ + struct tw68_dev *dev = dev_id; + u32 status, orig; + int loop; + + status = orig = tw_readl(TW68_INTSTAT) & dev->pci_irqmask; + /* Check if anything to do */ + if (0 == status) + return IRQ_NONE; /* Nope - return */ + for (loop = 0; loop < 10; loop++) { + if (status & dev->board_virqmask) /* video interrupt */ + tw68_irq_video_done(dev, status); + status = tw_readl(TW68_INTSTAT) & dev->pci_irqmask; + if (0 == status) + return IRQ_HANDLED; + } + dev_dbg(&dev->pci->dev, "%s: **** INTERRUPT NOT HANDLED - clearing mask (orig 0x%08x, cur 0x%08x)", + dev->name, orig, tw_readl(TW68_INTSTAT)); + dev_dbg(&dev->pci->dev, "%s: pci_irqmask 0x%08x; board_virqmask 0x%08x ****\n", + dev->name, dev->pci_irqmask, dev->board_virqmask); + tw_clearl(TW68_INTMASK, dev->pci_irqmask); + return IRQ_HANDLED; +} + +static int tw68_initdev(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct tw68_dev *dev; + int vidnr = -1; + int err; + + dev = devm_kzalloc(&pci_dev->dev, sizeof(*dev), GFP_KERNEL); + if (NULL == dev) + return -ENOMEM; + + dev->instance = v4l2_device_set_name(&dev->v4l2_dev, "tw68", + &tw68_instance); + + err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev); + if (err) + return err; + + /* pci init */ + dev->pci = pci_dev; + if (pci_enable_device(pci_dev)) { + err = -EIO; + goto fail1; + } + + dev->name = dev->v4l2_dev.name; + + if (UNSET != latency) { + pr_info("%s: setting pci latency timer to %d\n", + dev->name, latency); + pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency); + } + + /* print pci info */ + pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev); + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + pr_info("%s: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", + dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq, + dev->pci_lat, (u64)pci_resource_start(pci_dev, 0)); + pci_set_master(pci_dev); + err = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32)); + if (err) { + pr_info("%s: Oops: no 32bit PCI DMA ???\n", dev->name); + goto fail1; + } + + switch (pci_id->device) { + case PCI_DEVICE_ID_TECHWELL_6800: /* TW6800 */ + dev->vdecoder = TW6800; + dev->board_virqmask = TW68_VID_INTS; + break; + case PCI_DEVICE_ID_TECHWELL_6801: /* Video decoder for TW6802 */ + dev->vdecoder = TW6801; + dev->board_virqmask = TW68_VID_INTS | TW68_VID_INTSX; + break; + case PCI_DEVICE_ID_TECHWELL_6804: /* Video decoder for TW6804 */ + dev->vdecoder = TW6804; + dev->board_virqmask = TW68_VID_INTS | TW68_VID_INTSX; + break; + default: + dev->vdecoder = TWXXXX; /* To be announced */ + dev->board_virqmask = TW68_VID_INTS | TW68_VID_INTSX; + break; + } + + /* get mmio */ + if (!request_mem_region(pci_resource_start(pci_dev, 0), + pci_resource_len(pci_dev, 0), + dev->name)) { + err = -EBUSY; + pr_err("%s: can't get MMIO memory @ 0x%llx\n", + dev->name, + (unsigned long long)pci_resource_start(pci_dev, 0)); + goto fail1; + } + dev->lmmio = ioremap(pci_resource_start(pci_dev, 0), + pci_resource_len(pci_dev, 0)); + dev->bmmio = (__u8 __iomem *)dev->lmmio; + if (NULL == dev->lmmio) { + err = -EIO; + pr_err("%s: can't ioremap() MMIO memory\n", + dev->name); + goto fail2; + } + /* initialize hardware #1 */ + /* Then do any initialisation wanted before interrupts are on */ + tw68_hw_init1(dev); + + /* get irq */ + err = devm_request_irq(&pci_dev->dev, pci_dev->irq, tw68_irq, + IRQF_SHARED, dev->name, dev); + if (err < 0) { + pr_err("%s: can't get IRQ %d\n", + dev->name, pci_dev->irq); + goto fail3; + } + + /* + * Now do remainder of initialisation, first for + * things unique for this card, then for general board + */ + if (dev->instance < TW68_MAXBOARDS) + vidnr = video_nr[dev->instance]; + /* initialise video function first */ + err = tw68_video_init2(dev, vidnr); + if (err < 0) { + pr_err("%s: can't register video device\n", + dev->name); + goto fail4; + } + tw_setl(TW68_INTMASK, dev->pci_irqmask); + + pr_info("%s: registered device %s\n", + dev->name, video_device_node_name(&dev->vdev)); + + return 0; + +fail4: + video_unregister_device(&dev->vdev); +fail3: + iounmap(dev->lmmio); +fail2: + release_mem_region(pci_resource_start(pci_dev, 0), + pci_resource_len(pci_dev, 0)); +fail1: + v4l2_device_unregister(&dev->v4l2_dev); + return err; +} + +static void tw68_finidev(struct pci_dev *pci_dev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct tw68_dev *dev = + container_of(v4l2_dev, struct tw68_dev, v4l2_dev); + + /* shutdown subsystems */ + tw_clearl(TW68_DMAC, TW68_DMAP_EN | TW68_FIFO_EN); + tw_writel(TW68_INTMASK, 0); + + /* unregister */ + video_unregister_device(&dev->vdev); + v4l2_ctrl_handler_free(&dev->hdl); + + /* release resources */ + iounmap(dev->lmmio); + release_mem_region(pci_resource_start(pci_dev, 0), + pci_resource_len(pci_dev, 0)); + + v4l2_device_unregister(&dev->v4l2_dev); +} + +static int __maybe_unused tw68_suspend(struct device *dev_d) +{ + struct pci_dev *pci_dev = to_pci_dev(dev_d); + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct tw68_dev *dev = container_of(v4l2_dev, + struct tw68_dev, v4l2_dev); + + tw_clearl(TW68_DMAC, TW68_DMAP_EN | TW68_FIFO_EN); + dev->pci_irqmask &= ~TW68_VID_INTS; + tw_writel(TW68_INTMASK, 0); + + synchronize_irq(pci_dev->irq); + + vb2_discard_done(&dev->vidq); + + return 0; +} + +static int __maybe_unused tw68_resume(struct device *dev_d) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev_d); + struct tw68_dev *dev = container_of(v4l2_dev, + struct tw68_dev, v4l2_dev); + struct tw68_buf *buf; + unsigned long flags; + + /* Do things that are done in tw68_initdev , + except of initializing memory structures.*/ + + msleep(100); + + tw68_set_tvnorm_hw(dev); + + /*resume unfinished buffer(s)*/ + spin_lock_irqsave(&dev->slock, flags); + buf = container_of(dev->active.next, struct tw68_buf, list); + + tw68_video_start_dma(dev, buf); + + spin_unlock_irqrestore(&dev->slock, flags); + + return 0; +} + +/* ----------------------------------------------------------- */ + +static SIMPLE_DEV_PM_OPS(tw68_pm_ops, tw68_suspend, tw68_resume); + +static struct pci_driver tw68_pci_driver = { + .name = "tw68", + .id_table = tw68_pci_tbl, + .probe = tw68_initdev, + .remove = tw68_finidev, + .driver.pm = &tw68_pm_ops, +}; + +module_pci_driver(tw68_pci_driver); |