diff options
Diffstat (limited to 'drivers/media/usb/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/usb/em28xx/em28xx-cards.c | 4187 |
1 files changed, 4187 insertions, 0 deletions
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c new file mode 100644 index 000000000..4d037c92a --- /dev/null +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -0,0 +1,4187 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB +// video capture devices +// +// Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> +// Markus Rechberger <mrechberger@gmail.com> +// Mauro Carvalho Chehab <mchehab@kernel.org> +// Sascha Sommer <saschasommer@freenet.de> +// Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> + +#include "em28xx.h" + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/usb.h> +#include <media/tuner.h> +#include <media/drv-intf/msp3400.h> +#include <media/i2c/saa7115.h> +#include <dt-bindings/media/tvp5150.h> +#include <media/i2c/tvaudio.h> +#include <media/tveeprom.h> +#include <media/v4l2-common.h> +#include <sound/ac97_codec.h> + +#define DRIVER_NAME "em28xx" + +static int tuner = -1; +module_param(tuner, int, 0444); +MODULE_PARM_DESC(tuner, "tuner type"); + +static unsigned int disable_ir; +module_param(disable_ir, int, 0444); +MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); + +static unsigned int disable_usb_speed_check; +module_param(disable_usb_speed_check, int, 0444); +MODULE_PARM_DESC(disable_usb_speed_check, + "override min bandwidth requirement of 480M bps"); + +static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "card type"); + +static int usb_xfer_mode = -1; +module_param(usb_xfer_mode, int, 0444); +MODULE_PARM_DESC(usb_xfer_mode, + "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); + +/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ +static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); + +struct em28xx_hash_table { + unsigned long hash; + unsigned int model; + unsigned int tuner; +}; + +static void em28xx_pre_card_setup(struct em28xx *dev); + +/* + * Reset sequences for analog/digital modes + */ + +/* Reset for the most [analog] boards */ +static const struct em28xx_reg_seq default_analog[] = { + {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +/* Reset for the most [digital] boards */ +static const struct em28xx_reg_seq default_digital[] = { + {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +/* Board :Zolid Hybrid Tv Stick */ +static struct em28xx_reg_seq zolid_tuner[] = { + {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 100}, + {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 100}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq zolid_digital[] = { + {EM2820_R08_GPIO_CTRL, 0x6a, 0xff, 100}, + {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 100}, + {EM2880_R04_GPO, 0x04, 0xff, 100}, + {EM2880_R04_GPO, 0x0c, 0xff, 100}, + { -1, -1, -1, -1}, +}; + +/* Board Hauppauge WinTV HVR 900 analog */ +static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { + {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, + { 0x05, 0xff, 0x10, 10}, + { -1, -1, -1, -1}, +}; + +/* Board Hauppauge WinTV HVR 900 digital */ +static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { + {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x04, 0x0f, 10}, + {EM2880_R04_GPO, 0x0c, 0x0f, 10}, + { -1, -1, -1, -1}, +}; + +/* Board Hauppauge WinTV HVR 900 (R2) digital */ +static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { + {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x0c, 0x0f, 10}, + { -1, -1, -1, -1}, +}; + +/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ +static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { + {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +/* Board - EM2882 Kworld 315U digital */ +static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = { + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { + {EM2880_R04_GPO, 0x08, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq kworld_330u_analog[] = { + {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x00, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq kworld_330u_digital[] = { + {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +/* + * Evga inDtube + * GPIO0 - Enable digital power (s5h1409) - low to enable + * GPIO1 - Enable analog power (tvp5150/emp202) - low to enable + * GPIO4 - xc3028 reset + * GOP3 - s5h1409 reset + */ +static const struct em28xx_reg_seq evga_indtube_analog[] = { + {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq evga_indtube_digital[] = { + {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + +/* + * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: + * EM_GPIO_0 - currently unknown + * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) + * EM_GPIO_2 - currently unknown + * EM_GPIO_3 - currently unknown + * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) + * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) + * EM_GPIO_6 - currently unknown + * EM_GPIO_7 - currently unknown + */ +static const struct em28xx_reg_seq kworld_a340_digital[] = { + {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, + { -1, -1, -1, -1}, +}; + +/* Pinnacle Hybrid Pro eb1a:2881 */ +static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { + {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { + {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { + {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x00, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { + {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +/* + * PCTV HD Mini (80e) GPIOs + * 0-5: not used + * 6: demod reset, active low + * 7: LED on, active high + */ +static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = { + {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ + {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ + {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +/* + * eb1a:2868 Reddo DVB-C USB TV Box + * GPIO4 - CU1216L NIM + * Other GPIOs seems to be don't care. + */ +static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { + {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +/* Callback for the most boards */ +static const struct em28xx_reg_seq default_tuner_gpio[] = { + {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +/* Mute/unmute */ +static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = { + {EM2820_R08_GPIO_CTRL, 5, 7, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = { + {EM2820_R08_GPIO_CTRL, 4, 7, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq compro_mute_gpio[] = { + {EM2820_R08_GPIO_CTRL, 6, 7, 10}, + { -1, -1, -1, -1}, +}; + +/* Terratec AV350 */ +static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = { + {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq silvercrest_reg_seq[] = { + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq vc211a_enable[] = { + {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq dikom_dk300_digital[] = { + {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +/* Reset for the most [digital] boards */ +static const struct em28xx_reg_seq leadership_digital[] = { + {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq leadership_reset[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +/* + * 2013:024f PCTV nanoStick T2 290e + * GPIO_6 - demod reset + * GPIO_7 - LED + */ +static const struct em28xx_reg_seq pctv_290e[] = { + {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, + {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ + { -1, -1, -1, -1}, +}; + +#if 0 +static const struct em28xx_reg_seq terratec_h5_gpio[] = { + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq terratec_h5_digital[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, + { -1, -1, -1, -1}, +}; +#endif + +/* + * 2013:024f PCTV DVB-S2 Stick 460e + * GPIO_0 - POWER_ON + * GPIO_1 - BOOST + * GPIO_2 - VUV_LNB (red LED) + * GPIO_3 - EXT_12V + * GPIO_4 - INT_DEM (DEMOD GPIO_0) + * GPIO_5 - INT_LNB + * GPIO_6 - RESET_DEM + * GPIO_7 - LED (green LED) + */ +static const struct em28xx_reg_seq pctv_460e[] = { + {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, + { 0x0d, 0xff, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ + { 0x0d, 0x42, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ + {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, + { -1, -1, -1, -1}, +}; + +/* + * 2013:0258 PCTV DVB-S2 Stick (461e) + * GPIO 0 = POWER_ON + * GPIO 1 = BOOST + * GPIO 2 = VUV_LNB (red LED) + * GPIO 3 = #EXT_12V + * GPIO 4 = INT_DEM + * GPIO 5 = INT_LNB + * GPIO 6 = #RESET_DEM + * GPIO 7 = P07_LED (green LED) + */ +static const struct em28xx_reg_seq pctv_461e[] = { + {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, + {0x0d, 0xff, 0xff, 0}, + {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ + {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ + {0x0d, 0x42, 0xff, 0}, + {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, + {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ + { -1, -1, -1, -1}, +}; + +#if 0 +static const struct em28xx_reg_seq hauppauge_930c_gpio[] = { + {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ + {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq hauppauge_930c_digital[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, + { -1, -1, -1, -1}, +}; +#endif + +/* + * 1b80:e425 MaxMedia UB425-TC + * 1b80:e1cc Delock 61959 + * GPIO_6 - demod reset, 0=active + * GPIO_7 - LED, 0=active + */ +static const struct em28xx_reg_seq maxmedia_ub425_tc[] = { + {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ + { -1, -1, -1, -1}, +}; + +/* + * 2304:0242 PCTV QuatroStick (510e) + * GPIO_2: decoder reset, 0=active + * GPIO_4: decoder suspend, 0=active + * GPIO_6: demod reset, 0=active + * GPIO_7: LED, 1=active + */ +static const struct em28xx_reg_seq pctv_510e[] = { + {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ + { -1, -1, -1, -1}, +}; + +/* + * 2013:0251 PCTV QuatroStick nano (520e) + * GPIO_2: decoder reset, 0=active + * GPIO_4: decoder suspend, 0=active + * GPIO_6: demod reset, 0=active + * GPIO_7: LED, 1=active + */ +static const struct em28xx_reg_seq pctv_520e[] = { + {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ + { -1, -1, -1, -1}, +}; + +/* + * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam + * reg 0x80/0x84: + * GPIO_0: capturing LED, 0=on, 1=off + * GPIO_2: AV mute button, 0=pressed, 1=unpressed + * GPIO 3: illumination button, 0=pressed, 1=unpressed + * GPIO_6: illumination/flash LED, 0=on, 1=off + * reg 0x81/0x85: + * GPIO_7: snapshot button, 0=pressed, 1=unpressed + */ +static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { + {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, + { -1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq pctv_292e[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, + {0x0d, 0xff, 0xff, 950}, + {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, + {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, + {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, + {0x0d, 0x42, 0xff, 50}, + {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, + {-1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq terratec_t2_stick_hd[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, + {0x0d, 0xff, 0xff, 600}, + {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300}, + {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300}, + {0x0d, 0x42, 0xff, 1000}, + {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, + {-1, -1, -1, -1}, +}; + +static const struct em28xx_reg_seq plex_px_bcud[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, + {0x0d, 0xff, 0xff, 0}, + {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0}, + {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0}, + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100}, + {EM28XX_R12_VINENABLE, 0x20, 0x20, 0}, + {0x0d, 0x42, 0xff, 1000}, + {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, + {0x73, 0xfd, 0xff, 100}, + {-1, -1, -1, -1}, +}; + +/* + * 2040:0265 Hauppauge WinTV-dualHD DVB Isoc + * 2040:8265 Hauppauge WinTV-dualHD DVB Bulk + * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc + * 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk + * reg 0x80/0x84: + * GPIO_0: Yellow LED tuner 1, 0=on, 1=off + * GPIO_1: Green LED tuner 1, 0=on, 1=off + * GPIO_2: Yellow LED tuner 2, 0=on, 1=off + * GPIO_3: Green LED tuner 2, 0=on, 1=off + * GPIO_5: Reset #2, 0=active + * GPIO_6: Reset #1, 0=active + */ +static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, + {0x0d, 0xff, 0xff, 200}, + {0x50, 0x04, 0xff, 300}, + {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */ + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */ + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, + {EM2874_R5F_TS_ENABLE, 0x00, 0xff, 50}, /* disable TS filters */ + {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, + {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, + {-1, -1, -1, -1}, +}; + +/* Hauppauge USB QuadHD */ +static struct em28xx_reg_seq hauppauge_usb_quadhd_atsc_reg_seq[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, + {0x0d, 0xff, 0xff, 200}, + {0x50, 0x04, 0xff, 300}, + {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xf0, 100}, /* demod 1 reset */ + {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xd0, 0xf0, 100}, /* demod 2 reset */ + {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100}, + {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50}, + {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, + {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, + {-1, -1, -1, -1}, +}; + +/* + * Button definitions + */ +static const struct em28xx_button std_snapshot_button[] = { + { + .role = EM28XX_BUTTON_SNAPSHOT, + .reg_r = EM28XX_R0C_USBSUSP, + .reg_clearing = EM28XX_R0C_USBSUSP, + .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, + .inverted = 0, + }, + {-1, 0, 0, 0, 0}, +}; + +static const struct em28xx_button speedlink_vad_laplace_buttons[] = { + { + .role = EM28XX_BUTTON_SNAPSHOT, + .reg_r = EM2874_R85_GPIO_P1_STATE, + .mask = 0x80, + .inverted = 1, + }, + { + .role = EM28XX_BUTTON_ILLUMINATION, + .reg_r = EM2874_R84_GPIO_P0_STATE, + .mask = 0x08, + .inverted = 1, + }, + {-1, 0, 0, 0, 0}, +}; + +/* + * LED definitions + */ +static struct em28xx_led speedlink_vad_laplace_leds[] = { + { + .role = EM28XX_LED_ANALOG_CAPTURING, + .gpio_reg = EM2874_R80_GPIO_P0_CTRL, + .gpio_mask = 0x01, + .inverted = 1, + }, + { + .role = EM28XX_LED_ILLUMINATION, + .gpio_reg = EM2874_R80_GPIO_P0_CTRL, + .gpio_mask = 0x40, + .inverted = 1, + }, + {-1, 0, 0, 0}, +}; + +static struct em28xx_led kworld_ub435q_v3_leds[] = { + { + .role = EM28XX_LED_DIGITAL_CAPTURING, + .gpio_reg = EM2874_R80_GPIO_P0_CTRL, + .gpio_mask = 0x80, + .inverted = 1, + }, + {-1, 0, 0, 0}, +}; + +static struct em28xx_led pctv_80e_leds[] = { + { + .role = EM28XX_LED_DIGITAL_CAPTURING, + .gpio_reg = EM2874_R80_GPIO_P0_CTRL, + .gpio_mask = 0x80, + .inverted = 0, + }, + {-1, 0, 0, 0}, +}; + +static struct em28xx_led terratec_grabby_leds[] = { + { + .role = EM28XX_LED_ANALOG_CAPTURING, + .gpio_reg = EM2820_R08_GPIO_CTRL, + .gpio_mask = EM_GPIO_3, + .inverted = 1, + }, + {-1, 0, 0, 0}, +}; + +static struct em28xx_led hauppauge_dualhd_leds[] = { + { + .role = EM28XX_LED_DIGITAL_CAPTURING, + .gpio_reg = EM2874_R80_GPIO_P0_CTRL, + .gpio_mask = EM_GPIO_1, + .inverted = 1, + }, + { + .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, + .gpio_reg = EM2874_R80_GPIO_P0_CTRL, + .gpio_mask = EM_GPIO_3, + .inverted = 1, + }, + {-1, 0, 0, 0}, +}; + +static struct em28xx_led hauppauge_usb_quadhd_leds[] = { + { + .role = EM28XX_LED_DIGITAL_CAPTURING, + .gpio_reg = EM2874_R80_GPIO_P0_CTRL, + .gpio_mask = EM_GPIO_2, + .inverted = 1, + }, + { + .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, + .gpio_reg = EM2874_R80_GPIO_P0_CTRL, + .gpio_mask = EM_GPIO_0, + .inverted = 1, + }, + {-1, 0, 0, 0}, +}; + +/* + * Board definitions + */ +const struct em28xx_board em28xx_boards[] = { + [EM2750_BOARD_UNKNOWN] = { + .name = "EM2710/EM2750/EM2751 webcam grabber", + .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, + } }, + }, + [EM2800_BOARD_UNKNOWN] = { + .name = "Unknown EM2800 video grabber", + .is_em2800 = 1, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .tuner_type = TUNER_ABSENT, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_UNKNOWN] = { + .name = "Unknown EM2750/28xx video grabber", + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, /* To enable sensor probe */ + }, + [EM2882_BOARD_ZOLID_HYBRID_TV_STICK] = { + .name = ":ZOLID HYBRID TV STICK", + .tuner_type = TUNER_XC2028, + .tuner_gpio = zolid_tuner, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = zolid_digital, + }, + [EM2750_BOARD_DLCW_130] = { + /* Beijing Huaqi Information Digital Technology Co., Ltd */ + .name = "Huaqi DLCW-130", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + } }, + }, + [EM2820_BOARD_KWORLD_PVRTV2800RF] = { + .name = "Kworld PVR TV 2800 RF", + .tuner_type = TUNER_TEMIC_PAL, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_GADMEI_TVR200] = { + .name = "Gadmei TVR200", + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_TERRATEC_CINERGY_250] = { + .name = "Terratec Cinergy 250 USB", + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .has_ir_i2c = 1, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_PINNACLE_USB_2] = { + .name = "Pinnacle PCTV USB 2", + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .has_ir_i2c = 1, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { + .name = "Hauppauge WinTV USB 2", + .tuner_type = TUNER_PHILIPS_FM1236_MK3, + .tda9887_conf = TDA9887_PRESENT | + TDA9887_PORT1_ACTIVE | + TDA9887_PORT2_ACTIVE, + .decoder = EM28XX_TVP5150, + .has_msp34xx = 1, + .has_ir_i2c = 1, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = MSP_INPUT_DEFAULT, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), + } }, + }, + [EM2820_BOARD_DLINK_USB_TV] = { + .name = "D-Link DUB-T210 TV Tuner", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { + .name = "Hercules Smart TV USB 2.0", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { + .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_GADMEI_UTV310] = { + .name = "Gadmei UTV310", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_TNF_5335MF, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { + .name = "Leadtek Winfast USB II Deluxe", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .has_ir_i2c = 1, + .tvaudio_addr = 0x58, + .tda9887_conf = TDA9887_PRESENT | + TDA9887_PORT2_ACTIVE | + TDA9887_QSS, + .decoder = EM28XX_SAA711X, + .adecoder = EM28XX_TVAUDIO, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE4, + .amux = EM28XX_AMUX_AUX, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE5, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + .radio = { + .type = EM28XX_RADIO, + .amux = EM28XX_AMUX_AUX, + } + }, + [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { + .name = "Videology 20K14XUSB USB2.0", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + } }, + }, + [EM2820_BOARD_SILVERCREST_WEBCAM] = { + .name = "Silvercrest Webcam 1.3mpix", + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, + } }, + }, + [EM2821_BOARD_SUPERCOMP_USB_2] = { + .name = "Supercomp USB 2.0 TV", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_PHILIPS_FM1236_MK3, + .tda9887_conf = TDA9887_PRESENT | + TDA9887_PORT1_ACTIVE | + TDA9887_PORT2_ACTIVE, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2821_BOARD_USBGEAR_VD204] = { + .name = "Usbgear VD204v9", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_ABSENT, /* Capture only device */ + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2860_BOARD_NETGMBH_CAM] = { + /* Beijing Huaqi Information Digital Technology Co., Ltd */ + .name = "NetGMBH Cam", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + } }, + }, + [EM2860_BOARD_TYPHOON_DVD_MAKER] = { + .name = "Typhoon DVD Maker", + .decoder = EM28XX_SAA711X, + .tuner_type = TUNER_ABSENT, /* Capture only device */ + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2860_BOARD_GADMEI_UTV330] = { + .name = "Gadmei UTV330", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_TNF_5335MF, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2861_BOARD_GADMEI_UTV330PLUS] = { + .name = "Gadmei UTV330+", + .tuner_type = TUNER_TNF_5335MF, + .tda9887_conf = TDA9887_PRESENT, + .ir_codes = RC_MAP_GADMEI_RM008Z, + .decoder = EM28XX_SAA711X, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2860_BOARD_TERRATEC_HYBRID_XS] = { + .name = "Terratec Cinergy A Hybrid XS", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, + [EM2861_BOARD_KWORLD_PVRTV_300U] = { + .name = "KWorld PVRTV 300U", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { + .name = "Yakumo MovieMixer", + .tuner_type = TUNER_ABSENT, /* Capture only device */ + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { + .name = "EM2860/TVP5150 Reference Design", + .tuner_type = TUNER_ABSENT, /* Capture only device */ + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2861_BOARD_PLEXTOR_PX_TV100U] = { + .name = "Plextor ConvertX PX-TV100U", + .tuner_type = TUNER_TNF_5335MF, + .xclk = EM28XX_XCLK_I2S_MSB_TIMING | + EM28XX_XCLK_FREQUENCY_12MHZ, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_TVP5150, + .has_msp34xx = 1, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, + } }, + }, + + /* Those boards with em2870 are DVB Only*/ + + [EM2870_BOARD_TERRATEC_XS] = { + .name = "Terratec Cinergy T XS", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + }, + [EM2870_BOARD_TERRATEC_XS_MT2060] = { + .name = "Terratec Cinergy T XS (MT2060)", + .xclk = EM28XX_XCLK_IR_RC5_MODE | + EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, + .tuner_type = TUNER_ABSENT, /* MT2060 */ + .has_dvb = 1, + .tuner_gpio = default_tuner_gpio, + }, + [EM2870_BOARD_KWORLD_350U] = { + .name = "Kworld 350 U DVB-T", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + }, + [EM2870_BOARD_KWORLD_355U] = { + .name = "Kworld 355 U DVB-T", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_ABSENT, + .tuner_gpio = default_tuner_gpio, + .has_dvb = 1, + .dvb_gpio = default_digital, + }, + [EM2870_BOARD_PINNACLE_PCTV_DVB] = { + .name = "Pinnacle PCTV DVB-T", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_ABSENT, /* MT2060 */ + /* djh - I have serious doubts this is right... */ + .xclk = EM28XX_XCLK_IR_RC5_MODE | + EM28XX_XCLK_FREQUENCY_10MHZ, + }, + [EM2870_BOARD_COMPRO_VIDEOMATE] = { + .name = "Compro, VideoMate U3", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_ABSENT, /* MT2060 */ + }, + + [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { + .name = "Terratec Hybrid XS Secam", + .has_msp34xx = 1, + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .has_dvb = 1, + .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = terratec_cinergy_USB_XS_FR_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = terratec_cinergy_USB_XS_FR_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = terratec_cinergy_USB_XS_FR_analog, + } }, + }, + [EM2884_BOARD_TERRATEC_H5] = { + .name = "Terratec Cinergy H5", + .has_dvb = 1, +#if 0 + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = 0x41, + .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ + .tuner_gpio = terratec_h5_gpio, +#else + .tuner_type = TUNER_ABSENT, +#endif + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + [EM2884_BOARD_TERRATEC_H6] = { + .name = "Terratec Cinergy H6 rev. 2", + .has_dvb = 1, + .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, +#if 0 + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = 0x41, + .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ + .tuner_gpio = terratec_h5_gpio, +#else + .tuner_type = TUNER_ABSENT, +#endif + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { + .name = "Hauppauge WinTV HVR 930C", + .has_dvb = 1, +#if 0 /* FIXME: Add analog support */ + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x41, + .dvb_gpio = hauppauge_930c_digital, + .tuner_gpio = hauppauge_930c_gpio, +#else + .tuner_type = TUNER_ABSENT, +#endif + .ir_codes = RC_MAP_HAUPPAUGE, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { + .name = "C3 Tech Digital Duo HDTV/SDTV USB", + .has_dvb = 1, + /* FIXME: Add analog support - need a saa7136 driver */ + .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ + .ir_codes = RC_MAP_EMPTY, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, + .dvb_gpio = c3tech_digital_duo_digital, + }, + [EM2884_BOARD_CINERGY_HTC_STICK] = { + .name = "Terratec Cinergy HTC Stick", + .has_dvb = 1, + .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, + .tuner_type = TUNER_ABSENT, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = { + .name = "Elgato EyeTV Hybrid 2008 INT", + .has_dvb = 1, + .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, + .tuner_type = TUNER_ABSENT, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { + .name = "Hauppauge WinTV HVR 900", + .tda9887_conf = TDA9887_PRESENT, + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900_digital, + .ir_codes = RC_MAP_HAUPPAUGE, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, + [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { + .name = "Hauppauge WinTV HVR 900 (R2)", + .tda9887_conf = TDA9887_PRESENT, + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, + .ir_codes = RC_MAP_HAUPPAUGE, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, + [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { + .name = "Hauppauge WinTV HVR 850", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900_digital, + .ir_codes = RC_MAP_HAUPPAUGE, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, + [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { + .name = "Hauppauge WinTV HVR 950", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900_digital, + .ir_codes = RC_MAP_HAUPPAUGE, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, + [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { + .name = "Pinnacle PCTV HD Pro Stick", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900_digital, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, + [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { + .name = "AMD ATI TV Wonder HD 600", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900_digital, + .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, + [EM2880_BOARD_TERRATEC_HYBRID_XS] = { + .name = "Terratec Hybrid XS", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .has_dvb = 1, + .dvb_gpio = default_digital, + .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = default_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = default_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = default_analog, + } }, + }, + /* + * maybe there's a reason behind it why Terratec sells the Hybrid XS + * as Prodigy XS with a different PID, let's keep it separated for now + * maybe we'll need it later on + */ + [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { + .name = "Terratec Prodigy XS", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, + [EM2820_BOARD_MSI_VOX_USB_2] = { + .name = "MSI VOX USB 2.0", + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT | + TDA9887_PORT1_ACTIVE | + TDA9887_PORT2_ACTIVE, + .max_range_640_480 = 1, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE4, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2800_BOARD_TERRATEC_CINERGY_200] = { + .name = "Terratec Cinergy 200 USB", + .is_em2800 = 1, + .has_ir_i2c = 1, + .tuner_type = TUNER_LG_TALN, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2800_BOARD_GRABBEEX_USB2800] = { + .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", + .is_em2800 = 1, + .decoder = EM28XX_SAA711X, + .tuner_type = TUNER_ABSENT, /* capture only board */ + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2800_BOARD_VC211A] = { + .name = "Actionmaster/LinXcel/Digitus VC211A", + .is_em2800 = 1, + .tuner_type = TUNER_ABSENT, /* Capture-only board */ + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = vc211a_enable, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = vc211a_enable, + } }, + }, + [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { + .name = "Leadtek Winfast USB II", + .is_em2800 = 1, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2800_BOARD_KWORLD_USB2800] = { + .name = "Kworld USB2800", + .is_em2800 = 1, + .tuner_type = TUNER_PHILIPS_FCV1236D, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_PINNACLE_DVC_90] = { + .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", + .tuner_type = TUNER_ABSENT, /* capture only board */ + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2800_BOARD_VGEAR_POCKETTV] = { + .name = "V-Gear PocketTV", + .is_em2800 = 1, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { + .name = "Pixelview PlayTV Box 4 USB 2.0", + .tda9887_conf = TDA9887_PRESENT, + .tuner_type = TUNER_YMEC_TVF_5533MF, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + .aout = EM28XX_AOUT_MONO | /* I2S */ + EM28XX_AOUT_MASTER, /* Line out pin */ + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { + .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", + .buttons = std_snapshot_button, + .tda9887_conf = TDA9887_PRESENT, + .tuner_type = TUNER_YMEC_TVF_5533MF, + .tuner_addr = 0x60, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + .aout = EM28XX_AOUT_MONO | /* I2S */ + EM28XX_AOUT_MASTER, /* Line out pin */ + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { + .name = "EM2860/SAA711X Reference Design", + .buttons = std_snapshot_button, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + } }, + }, + + [EM2874_BOARD_LEADERSHIP_ISDBT] = { + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_100_KHZ, + .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, + .name = "EM2874 Leadership ISDBT", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = leadership_reset, + .dvb_gpio = leadership_digital, + .has_dvb = 1, + }, + + [EM2880_BOARD_MSI_DIGIVOX_AD] = { + .name = "MSI DigiVox A/D", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = em2880_msi_digivox_ad_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2880_msi_digivox_ad_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2880_msi_digivox_ad_analog, + } }, + }, + [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { + .name = "MSI DigiVox A/D II", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = em2880_msi_digivox_ad_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2880_msi_digivox_ad_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2880_msi_digivox_ad_analog, + } }, + }, + [EM2880_BOARD_KWORLD_DVB_305U] = { + .name = "KWorld DVB-T 305U", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2880_BOARD_KWORLD_DVB_310U] = { + .name = "KWorld DVB-T 310U", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .has_dvb = 1, + .dvb_gpio = default_digital, + .mts_firmware = 1, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = default_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = default_analog, + }, { /* S-video has not been tested yet */ + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = default_analog, + } }, + }, + [EM2882_BOARD_KWORLD_ATSC_315U] = { + .name = "KWorld ATSC 315U HDTV TV Box", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_THOMSON_DTT761X, + .tuner_gpio = em2882_kworld_315u_tuner_gpio, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .has_dvb = 1, + .dvb_gpio = em2882_kworld_315u_digital, + .ir_codes = RC_MAP_KWORLD_315U, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, +#if 0 + /* FIXME: Analog mode - still not ready */ + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + .gpio = em2882_kworld_315u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2882_kworld_315u_analog1, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2882_kworld_315u_analog1, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + } }, +#endif + }, + [EM2880_BOARD_EMPIRE_DUAL_TV] = { + .name = "Empire dual TV", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .has_dvb = 1, + .dvb_gpio = default_digital, + .mts_firmware = 1, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = default_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = default_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = default_analog, + } }, + }, + [EM2881_BOARD_DNT_DA2_HYBRID] = { + .name = "DNT DA2 Hybrid", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = default_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = default_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = default_analog, + } }, + }, + [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { + .name = "Pinnacle Hybrid Pro", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .has_dvb = 1, + .dvb_gpio = pinnacle_hybrid_pro_digital, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = pinnacle_hybrid_pro_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, + } }, + }, + [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { + .name = "Pinnacle Hybrid Pro (330e)", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, + [EM2882_BOARD_KWORLD_VS_DVBT] = { + .name = "Kworld VS-DVB-T 323UR", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = kworld_330u_digital, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ + .ir_codes = RC_MAP_KWORLD_315U, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2882_BOARD_TERRATEC_HYBRID_XS] = { + .name = "Terratec Cinergy Hybrid T USB XS (em2882)", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, + .decoder = EM28XX_TVP5150, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900_digital, + .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, + [EM2882_BOARD_DIKOM_DK300] = { + .name = "Dikom DK300", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = dikom_dk300_digital, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = default_analog, + } }, + }, + [EM2883_BOARD_KWORLD_HYBRID_330U] = { + .name = "Kworld PlusTV HD Hybrid 330", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = kworld_330u_digital, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_EEPROM_ON_BOARD | + EM28XX_I2C_EEPROM_KEY_VALID, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = kworld_330u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = kworld_330u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = kworld_330u_analog, + } }, + }, + [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { + .name = "Compro VideoMate ForYou/Stereo", + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tvaudio_addr = 0xb0, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_TVP5150, + .adecoder = EM28XX_TVAUDIO, + .mute_gpio = compro_mute_gpio, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = compro_unmute_tv_gpio, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = compro_unmute_svid_gpio, + } }, + }, + [EM2860_BOARD_KAIOMY_TVNPC_U2] = { + .name = "Kaiomy TVnPC U2", + .vchannels = 3, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .mts_firmware = 1, + .decoder = EM28XX_TVP5150, + .tuner_gpio = default_tuner_gpio, + .ir_codes = RC_MAP_KAIOMY, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + } }, + .radio = { + .type = EM28XX_RADIO, + .amux = EM28XX_AMUX_LINE_IN, + } + }, + [EM2860_BOARD_EASYCAP] = { + .name = "Easy Cap Capture DC-60", + .vchannels = 2, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + [EM2820_BOARD_IODATA_GVMVP_SZ] = { + .name = "IO-DATA GV-MVP/SZ", + .tuner_type = TUNER_PHILIPS_FM1236_MK3, + .tuner_gpio = default_tuner_gpio, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + }, { /* Composite has not been tested yet */ + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_VIDEO, + }, { /* S-video has not been tested yet */ + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_VIDEO, + } }, + }, + [EM2860_BOARD_TERRATEC_GRABBY] = { + .name = "Terratec Grabby", + .vchannels = 2, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + .buttons = std_snapshot_button, + .leds = terratec_grabby_leds, + }, + [EM2860_BOARD_TERRATEC_AV350] = { + .name = "Terratec AV350", + .vchannels = 2, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .mute_gpio = terratec_av350_mute_gpio, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = terratec_av350_unmute_gpio, + + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = terratec_av350_unmute_gpio, + } }, + }, + + [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { + .name = "Elgato Video Capture", + .decoder = EM28XX_SAA711X, + .tuner_type = TUNER_ABSENT, /* Capture only device */ + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + + [EM2882_BOARD_EVGA_INDTUBE] = { + .name = "Evga inDtube", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = evga_indtube_digital, + .ir_codes = RC_MAP_EVGA_INDTUBE, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + } }, + }, + /* + * eb1a:2868 Empia EM2870 + Philips CU1216L NIM + * (Philips TDA10023 + Infineon TUA6034) + */ + [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { + .name = "Reddo DVB-C USB TV Box", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = reddo_dvb_c_usb_box, + .has_dvb = 1, + }, + /* + * 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold + * initially as the KWorld PlusTV 340U, then as the UB435-Q. + * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 + */ + [EM2870_BOARD_KWORLD_A340] = { + .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", + .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ + .has_dvb = 1, + .dvb_gpio = kworld_a340_digital, + .tuner_gpio = default_tuner_gpio, + }, + /* + * 2013:024f PCTV nanoStick T2 290e. + * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 + */ + [EM28174_BOARD_PCTV_290E] = { + .name = "PCTV nanoStick T2 290e", + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_100_KHZ, + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_290e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + }, + /* + * 2013:024f PCTV DVB-S2 Stick 460e + * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 + */ + [EM28174_BOARD_PCTV_460E] = { + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + .name = "PCTV DVB-S2 Stick (460e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_460e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + }, + /* + * eb1a:5006 Honestech VIDBOX NW03 + * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner + */ + [EM2860_BOARD_HT_VIDBOX_NW03] = { + .name = "Honestech Vidbox NW03", + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */ + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + /* + * 1b80:e425 MaxMedia UB425-TC + * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 + */ + [EM2874_BOARD_MAXMEDIA_UB425_TC] = { + .name = "MaxMedia UB425-TC", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = maxmedia_ub425_tc, + .has_dvb = 1, + .ir_codes = RC_MAP_REDDO, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + /* + * 2304:0242 PCTV QuatroStick (510e) + * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 + */ + [EM2884_BOARD_PCTV_510E] = { + .name = "PCTV QuatroStick (510e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_510e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + /* + * 2013:0251 PCTV QuatroStick nano (520e) + * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 + */ + [EM2884_BOARD_PCTV_520E] = { + .name = "PCTV QuatroStick nano (520e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_520e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { + .name = "Terratec Cinergy HTC USB XS", + .has_dvb = 1, + .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, + .tuner_type = TUNER_ABSENT, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + /* + * 1b80:e1cc Delock 61959 + * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 + * mostly the same as MaxMedia UB-425-TC but different remote + */ + [EM2874_BOARD_DELOCK_61959] = { + .name = "Delock 61959", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = maxmedia_ub425_tc, + .has_dvb = 1, + .ir_codes = RC_MAP_DELOCK_61959, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + /* + * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 + * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 + */ + [EM2874_BOARD_KWORLD_UB435Q_V2] = { + .name = "KWorld USB ATSC TV Stick UB435-Q V2", + .tuner_type = TUNER_ABSENT, + .has_dvb = 1, + .dvb_gpio = kworld_a340_digital, + .tuner_gpio = default_tuner_gpio, + .def_i2c_bus = 1, + }, + /* + * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 + * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 + */ + [EM2874_BOARD_KWORLD_UB435Q_V3] = { + .name = "KWorld USB ATSC TV Stick UB435-Q V3", + .tuner_type = TUNER_ABSENT, + .has_dvb = 1, + .tuner_gpio = kworld_ub435q_v3_digital, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_100_KHZ, + .leds = kworld_ub435q_v3_leds, + }, + [EM2874_BOARD_PCTV_HD_MINI_80E] = { + .name = "Pinnacle PCTV HD Mini", + .tuner_type = TUNER_ABSENT, + .has_dvb = 1, + .dvb_gpio = em2874_pctv_80e_digital, + .decoder = EM28XX_NODECODER, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + .leds = pctv_80e_leds, + }, + /* + * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam + * Empia EM2765 + OmniVision OV2640 + */ + [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { + .name = "SpeedLink Vicious And Devine Laplace webcam", + .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_100_KHZ, + .def_i2c_bus = 1, + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .amux = EM28XX_AMUX_VIDEO, + .gpio = speedlink_vad_laplace_reg_seq, + } }, + .buttons = speedlink_vad_laplace_buttons, + .leds = speedlink_vad_laplace_leds, + }, + /* + * 2013:0258 PCTV DVB-S2 Stick (461e) + * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 + */ + [EM28178_BOARD_PCTV_461E] = { + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + .name = "PCTV DVB-S2 Stick (461e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_461e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + }, + /* + * 2013:0259 PCTV DVB-S2 Stick (461e_v2) + * Empia EM28178, Montage M88DS3103b, Montage M88TS2022, Allegro A8293 + */ + [EM28178_BOARD_PCTV_461E_V2] = { + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + .name = "PCTV DVB-S2 Stick (461e v2)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_461e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + }, + /* + * 2013:025f PCTV tripleStick (292e). + * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 + */ + [EM28178_BOARD_PCTV_292E] = { + .name = "PCTV tripleStick (292e)", + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_292e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + }, + [EM2861_BOARD_LEADTEK_VC100] = { + .name = "Leadtek VC100", + .tuner_type = TUNER_ABSENT, /* Capture only device */ + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + /* + * eb1a:8179 Terratec Cinergy T2 Stick HD. + * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 + */ + [EM28178_BOARD_TERRATEC_T2_STICK_HD] = { + .name = "Terratec Cinergy T2 Stick HD", + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + .tuner_type = TUNER_ABSENT, + .tuner_gpio = terratec_t2_stick_hd, + .has_dvb = 1, + .ir_codes = RC_MAP_TERRATEC_SLIM_2, + }, + + /* + * 3275:0085 PLEX PX-BCUD. + * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042 + */ + [EM28178_BOARD_PLEX_PX_BCUD] = { + .name = "PLEX PX-BCUD", + .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ, + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, + .tuner_type = TUNER_ABSENT, + .tuner_gpio = plex_px_bcud, + .has_dvb = 1, + }, + /* + * 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc. + * 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk. + * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157 + */ + [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = { + .name = "Hauppauge WinTV-dualHD DVB", + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + .tuner_type = TUNER_SI2157, + .tuner_gpio = hauppauge_dualhd_dvb, + .has_dvb = 1, + .has_dual_ts = 1, + .ir_codes = RC_MAP_HAUPPAUGE, + .leds = hauppauge_dualhd_leds, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + /* + * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc. + * 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk. + * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157 + */ + [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = { + .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM", + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + .tuner_type = TUNER_ABSENT, + .tuner_gpio = hauppauge_dualhd_dvb, + .has_dvb = 1, + .has_dual_ts = 1, + .ir_codes = RC_MAP_HAUPPAUGE, + .leds = hauppauge_dualhd_leds, + }, + /* + * 1b80:e349 Magix USB Videowandler-2 + * (same chips as Honestech VIDBOX NW03) + * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner + */ + [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = { + .name = "Magix USB Videowandler-2", + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + /* + * 1f4d:1abe MyGica iGrabber + * (same as several other EM2860 devices) + * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner + */ + [EM2860_BOARD_MYGICA_IGRABBER] = { + .name = "MyGica iGrabber", + .vchannels = 2, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_COMPOSITE, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, + /* 2040:826d Hauppauge USB QuadHD + * Empia 28274, Max Linear 692 ATSC combo demod/tuner + */ + [EM2874_BOARD_HAUPPAUGE_USB_QUADHD] = { + .name = "Hauppauge USB QuadHD ATSC", + .def_i2c_bus = 1, + .has_dual_ts = 1, + .has_dvb = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, + .tuner_type = TUNER_ABSENT, + .tuner_gpio = hauppauge_usb_quadhd_atsc_reg_seq, + .leds = hauppauge_usb_quadhd_leds, + }, +}; +EXPORT_SYMBOL_GPL(em28xx_boards); + +static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); + +/* table of devices that work with this driver */ +struct usb_device_id em28xx_id_table[] = { + { USB_DEVICE(0xeb1a, 0x2750), + .driver_info = EM2750_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2751), + .driver_info = EM2750_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2800), + .driver_info = EM2800_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2710), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2820), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2821), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2860), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2861), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2862), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2863), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2870), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2881), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2883), /* used by :Zolid Hybrid Tv Stick */ + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2868), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2875), + .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ + .driver_info = EM2884_BOARD_TERRATEC_H5 }, + { USB_DEVICE(0xeb1a, 0xe300), + .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, + { USB_DEVICE(0xeb1a, 0xe303), + .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, + { USB_DEVICE(0xeb1a, 0xe305), + .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, + { USB_DEVICE(0xeb1a, 0xe310), + .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, + { USB_DEVICE(0xeb1a, 0xa313), + .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, + { USB_DEVICE(0xeb1a, 0xa316), + .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, + { USB_DEVICE(0xeb1a, 0xe320), + .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, + { USB_DEVICE(0xeb1a, 0xe323), + .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, + { USB_DEVICE(0xeb1a, 0xe350), + .driver_info = EM2870_BOARD_KWORLD_350U }, + { USB_DEVICE(0xeb1a, 0xe355), + .driver_info = EM2870_BOARD_KWORLD_355U }, + { USB_DEVICE(0xeb1a, 0x2801), + .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, + { USB_DEVICE(0xeb1a, 0xe357), + .driver_info = EM2870_BOARD_KWORLD_355U }, + { USB_DEVICE(0xeb1a, 0xe359), + .driver_info = EM2870_BOARD_KWORLD_355U }, + { USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */ + .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, + { USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */ + .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, + { USB_DEVICE(0x0ccd, 0x0036), + .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, + { USB_DEVICE(0x0ccd, 0x004c), + .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, + { USB_DEVICE(0x0ccd, 0x004f), + .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, + { USB_DEVICE(0x0ccd, 0x005e), + .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, + { USB_DEVICE(0x0ccd, 0x0042), + .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, + { USB_DEVICE(0x0ccd, 0x0043), + .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 }, + { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ + .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, + { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ + .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, + { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ + .driver_info = EM2884_BOARD_TERRATEC_H5 }, + { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ + .driver_info = EM2884_BOARD_TERRATEC_H5 }, + { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ + .driver_info = EM2884_BOARD_TERRATEC_H5 }, + { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */ + .driver_info = EM2884_BOARD_TERRATEC_H6 }, + { USB_DEVICE(0x0ccd, 0x0084), + .driver_info = EM2860_BOARD_TERRATEC_AV350 }, + { USB_DEVICE(0x0ccd, 0x0096), + .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, + { USB_DEVICE(0x0ccd, 0x10AF), + .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, + { USB_DEVICE(0x0ccd, 0x00b2), + .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, + { USB_DEVICE(0x0fd9, 0x0018), + .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 }, + { USB_DEVICE(0x0fd9, 0x0033), + .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE }, + { USB_DEVICE(0x185b, 0x2870), + .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, + { USB_DEVICE(0x185b, 0x2041), + .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, + { USB_DEVICE(0x2040, 0x4200), + .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, + { USB_DEVICE(0x2040, 0x4201), + .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, + { USB_DEVICE(0x2040, 0x6500), + .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, + { USB_DEVICE(0x2040, 0x6502), + .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, + { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ + .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, + { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ + .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, + { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ + .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, + { USB_DEVICE(0x2040, 0x651f), + .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, + { USB_DEVICE(0x2040, 0x0265), + .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, + { USB_DEVICE(0x2040, 0x8265), + .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, + { USB_DEVICE(0x2040, 0x026d), + .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, + { USB_DEVICE(0x2040, 0x826d), + .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, + { USB_DEVICE(0x2040, 0x846d), + .driver_info = EM2874_BOARD_HAUPPAUGE_USB_QUADHD }, + { USB_DEVICE(0x0438, 0xb002), + .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, + { USB_DEVICE(0x2001, 0xf112), + .driver_info = EM2820_BOARD_DLINK_USB_TV }, + { USB_DEVICE(0x2304, 0x0207), + .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, + { USB_DEVICE(0x2304, 0x0208), + .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, + { USB_DEVICE(0x2304, 0x021a), + .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, + { USB_DEVICE(0x2304, 0x0226), + .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, + { USB_DEVICE(0x2304, 0x0227), + .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, + { USB_DEVICE(0x2304, 0x023f), + .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, + { USB_DEVICE(0x0413, 0x6023), + .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, + { USB_DEVICE(0x093b, 0xa003), + .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, + { USB_DEVICE(0x093b, 0xa005), + .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, + { USB_DEVICE(0x04bb, 0x0515), + .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, + { USB_DEVICE(0xeb1a, 0x50a6), + .driver_info = EM2860_BOARD_GADMEI_UTV330 }, + { USB_DEVICE(0x1b80, 0xa340), + .driver_info = EM2870_BOARD_KWORLD_A340 }, + { USB_DEVICE(0x1b80, 0xe346), + .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, + { USB_DEVICE(0x1b80, 0xe34c), + .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, + { USB_DEVICE(0x2013, 0x024f), + .driver_info = EM28174_BOARD_PCTV_290E }, + { USB_DEVICE(0x2013, 0x024c), + .driver_info = EM28174_BOARD_PCTV_460E }, + { USB_DEVICE(0x2040, 0x1605), + .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, + { USB_DEVICE(0x1b80, 0xe755), + .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, + { USB_DEVICE(0xeb1a, 0x5006), + .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, + { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ + .driver_info = EM2860_BOARD_EASYCAP }, + { USB_DEVICE(0x1b80, 0xe425), + .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, + { USB_DEVICE(0x1f4d, 0x1abe), + .driver_info = EM2860_BOARD_MYGICA_IGRABBER }, + { USB_DEVICE(0x2304, 0x0242), + .driver_info = EM2884_BOARD_PCTV_510E }, + { USB_DEVICE(0x2013, 0x0251), + .driver_info = EM2884_BOARD_PCTV_520E }, + { USB_DEVICE(0x1b80, 0xe1cc), + .driver_info = EM2874_BOARD_DELOCK_61959 }, + { USB_DEVICE(0x1ae7, 0x9003), + .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, + { USB_DEVICE(0x1ae7, 0x9004), + .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, + { USB_DEVICE(0x2013, 0x0258), + .driver_info = EM28178_BOARD_PCTV_461E }, + { USB_DEVICE(0x2013, 0x8258), /* Bulk transport 461e */ + .driver_info = EM28178_BOARD_PCTV_461E }, + { USB_DEVICE(0x2013, 0x0461), + .driver_info = EM28178_BOARD_PCTV_461E_V2 }, + { USB_DEVICE(0x2013, 0x8461), /* Bulk transport 461e v2 */ + .driver_info = EM28178_BOARD_PCTV_461E_V2 }, + { USB_DEVICE(0x2013, 0x0259), + .driver_info = EM28178_BOARD_PCTV_461E_V2 }, + { USB_DEVICE(0x2013, 0x025f), + .driver_info = EM28178_BOARD_PCTV_292E }, + { USB_DEVICE(0x2013, 0x0264), /* Hauppauge WinTV-soloHD 292e SE */ + .driver_info = EM28178_BOARD_PCTV_292E }, + { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */ + .driver_info = EM28178_BOARD_PCTV_292E }, + { USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */ + .driver_info = EM28178_BOARD_PCTV_292E }, + { USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */ + .driver_info = EM28178_BOARD_PCTV_292E }, + { USB_DEVICE(0x0413, 0x6f07), + .driver_info = EM2861_BOARD_LEADTEK_VC100 }, + { USB_DEVICE(0xeb1a, 0x8179), + .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, + { USB_DEVICE(0x3275, 0x0085), + .driver_info = EM28178_BOARD_PLEX_PX_BCUD }, + { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */ + .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN }, + { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */ + .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 }, + { }, +}; +MODULE_DEVICE_TABLE(usb, em28xx_id_table); + +/* + * EEPROM hash table for devices with generic USB IDs + */ +static const struct em28xx_hash_table em28xx_eeprom_hash[] = { + /* P/N: SA 60002070465 Tuner: TVF7533-MF */ + {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, + {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, + {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, + {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, + {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, + {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, + {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, + {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, + {0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, +}; + +/* I2C devicelist hash table for devices with generic USB IDs */ +static const struct em28xx_hash_table em28xx_i2c_hash[] = { + {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, + {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, + {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, + {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, + {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, + {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, + {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, + {0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, +}; + +/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ + +int em28xx_tuner_callback(void *ptr, int component, int command, int arg) +{ + struct em28xx_i2c_bus *i2c_bus = ptr; + struct em28xx *dev = i2c_bus->dev; + int rc = 0; + + if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) + return 0; + + if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) + return 0; + + rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); + + return rc; +} +EXPORT_SYMBOL_GPL(em28xx_tuner_callback); + +static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev) +{ + const struct em28xx_board *board = &em28xx_boards[dev->model]; + u8 xclk = board->xclk, i2c_speed = board->i2c_speed; + + /* + * Those are the default values for the majority of boards + * Use those values if not specified otherwise at boards entry + */ + if (!xclk) + xclk = EM28XX_XCLK_IR_RC5_MODE | + EM28XX_XCLK_FREQUENCY_12MHZ; + + em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk); + + if (!i2c_speed) + i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_100_KHZ; + + dev->i2c_speed = i2c_speed & 0x03; + + if (!dev->board.is_em2800) + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, i2c_speed); + msleep(50); +} + +static inline void em28xx_set_model(struct em28xx *dev) +{ + dev->board = em28xx_boards[dev->model]; + dev->has_msp34xx = dev->board.has_msp34xx; + dev->is_webcam = dev->board.is_webcam; + + em28xx_set_xclk_i2c_speed(dev); + + /* Should be initialized early, for I2C to work */ + dev->def_i2c_bus = dev->board.def_i2c_bus; +} + +/* + * Wait until AC97_RESET reports the expected value reliably before proceeding. + * We also check that two unrelated registers accesses don't return the same + * value to avoid premature return. + * This procedure helps ensuring AC97 register accesses are reliable. + */ +static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, + int expected_feat) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(2000); + int feat, powerdown; + + while (time_is_after_jiffies(timeout)) { + feat = em28xx_read_ac97(dev, AC97_RESET); + if (feat < 0) + return feat; + + powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN); + if (powerdown < 0) + return powerdown; + + if (feat == expected_feat && feat != powerdown) + return 0; + + msleep(50); + } + + dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n"); + return -ETIMEDOUT; +} + +/* + * Since em28xx_pre_card_setup() requires a proper dev->model, + * this won't work for boards with generic PCI IDs + */ +static void em28xx_pre_card_setup(struct em28xx *dev) +{ + /* + * Set the initial XCLK and I2C clock values based on the board + * definition + */ + em28xx_set_xclk_i2c_speed(dev); + + /* request some modules */ + switch (dev->model) { + case EM2861_BOARD_PLEXTOR_PX_TV100U: + /* Sets the msp34xx I2S speed */ + dev->i2s_speed = 2048000; + break; + case EM2861_BOARD_KWORLD_PVRTV_300U: + case EM2880_BOARD_KWORLD_DVB_305U: + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); + usleep_range(10000, 11000); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); + usleep_range(10000, 11000); + break; + case EM2870_BOARD_COMPRO_VIDEOMATE: + /* + * TODO: someone can do some cleanup here... + * not everything's needed + */ + em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); + usleep_range(10000, 11000); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); + usleep_range(10000, 11000); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); + msleep(70); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); + msleep(70); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); + msleep(70); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); + msleep(70); + break; + case EM2870_BOARD_TERRATEC_XS_MT2060: + /* + * this device needs some gpio writes to get the DVB-T + * demod work + */ + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); + msleep(70); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); + msleep(70); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); + msleep(70); + break; + case EM2870_BOARD_PINNACLE_PCTV_DVB: + /* + * this device needs some gpio writes to get the + * DVB-T demod work + */ + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); + msleep(70); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); + msleep(70); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); + msleep(70); + break; + case EM2820_BOARD_GADMEI_UTV310: + case EM2820_BOARD_MSI_VOX_USB_2: + /* enables audio for that devices */ + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); + break; + + case EM2882_BOARD_KWORLD_ATSC_315U: + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); + usleep_range(10000, 11000); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); + usleep_range(10000, 11000); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); + usleep_range(10000, 11000); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); + usleep_range(10000, 11000); + break; + + case EM2860_BOARD_KAIOMY_TVNPC_U2: + em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); + em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); + em28xx_write_regs(dev, 0x0d, "\x42", 1); + em28xx_write_regs(dev, 0x08, "\xfd", 1); + usleep_range(10000, 11000); + em28xx_write_regs(dev, 0x08, "\xff", 1); + usleep_range(10000, 11000); + em28xx_write_regs(dev, 0x08, "\x7f", 1); + usleep_range(10000, 11000); + em28xx_write_regs(dev, 0x08, "\x6b", 1); + + break; + case EM2860_BOARD_EASYCAP: + em28xx_write_regs(dev, 0x08, "\xf8", 1); + break; + + case EM2820_BOARD_IODATA_GVMVP_SZ: + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); + msleep(70); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); + usleep_range(10000, 11000); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); + msleep(70); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); + msleep(70); + break; + + case EM2860_BOARD_TERRATEC_GRABBY: + /* + * HACK?: Ensure AC97 register reading is reliable before + * proceeding. In practice, this will wait about 1.6 seconds. + */ + em28xx_wait_until_ac97_features_equals(dev, 0x6a90); + break; + } + + em28xx_gpio_set(dev, dev->board.tuner_gpio); + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); + + /* Unlock device */ + em28xx_set_mode(dev, EM28XX_SUSPEND); +} + +static int em28xx_hint_board(struct em28xx *dev) +{ + int i; + + if (dev->is_webcam) { + if (dev->em28xx_sensor == EM28XX_MT9V011) { + dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + } else if (dev->em28xx_sensor == EM28XX_MT9M001 || + dev->em28xx_sensor == EM28XX_MT9M111) { + dev->model = EM2750_BOARD_UNKNOWN; + } + /* FIXME: IMPROVE ! */ + + return 0; + } + + /* + * HINT method: EEPROM + * + * This method works only for boards with eeprom. + * Uses a hash of all eeprom bytes. The hash should be + * unique for a vendor/tuner pair. + * There are a high chance that tuners for different + * video standards produce different hashes. + */ + for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { + if (dev->hash == em28xx_eeprom_hash[i].hash) { + dev->model = em28xx_eeprom_hash[i].model; + dev->tuner_type = em28xx_eeprom_hash[i].tuner; + + dev_err(&dev->intf->dev, + "Your board has no unique USB ID.\n" + "A hint were successfully done, based on eeprom hash.\n" + "This method is not 100%% failproof.\n" + "If the board were misdetected, please email this log to:\n" + "\tV4L Mailing List <linux-media@vger.kernel.org>\n" + "Board detected as %s\n", + em28xx_boards[dev->model].name); + + return 0; + } + } + + /* + * HINT method: I2C attached devices + * + * This method works for all boards. + * Uses a hash of i2c scanned devices. + * Devices with the same i2c attached chips will + * be considered equal. + * This method is less precise than the eeprom one. + */ + + /* user did not request i2c scanning => do it now */ + if (!dev->i2c_hash) + em28xx_do_i2c_scan(dev, dev->def_i2c_bus); + + for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { + if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { + dev->model = em28xx_i2c_hash[i].model; + dev->tuner_type = em28xx_i2c_hash[i].tuner; + dev_err(&dev->intf->dev, + "Your board has no unique USB ID.\n" + "A hint were successfully done, based on i2c devicelist hash.\n" + "This method is not 100%% failproof.\n" + "If the board were misdetected, please email this log to:\n" + "\tV4L Mailing List <linux-media@vger.kernel.org>\n" + "Board detected as %s\n", + em28xx_boards[dev->model].name); + + return 0; + } + } + + dev_err(&dev->intf->dev, + "Your board has no unique USB ID and thus need a hint to be detected.\n" + "You may try to use card=<n> insmod option to workaround that.\n" + "Please send an email with this log to:\n" + "\tV4L Mailing List <linux-media@vger.kernel.org>\n" + "Board eeprom hash is 0x%08lx\n" + "Board i2c devicelist hash is 0x%08lx\n", + dev->hash, dev->i2c_hash); + + dev_err(&dev->intf->dev, + "Here is a list of valid choices for the card=<n> insmod option:\n"); + for (i = 0; i < em28xx_bcount; i++) { + dev_err(&dev->intf->dev, + " card=%d -> %s\n", i, em28xx_boards[i].name); + } + return -1; +} + +static void em28xx_card_setup(struct em28xx *dev) +{ + int i, j, idx; + bool duplicate_entry; + + /* + * If the device can be a webcam, seek for a sensor. + * If sensor is not found, then it isn't a webcam. + */ + if (dev->is_webcam) { + em28xx_detect_sensor(dev); + if (dev->em28xx_sensor == EM28XX_NOSENSOR) + /* NOTE: error/unknown sensor/no sensor */ + dev->is_webcam = 0; + } + + switch (dev->model) { + case EM2750_BOARD_UNKNOWN: + case EM2820_BOARD_UNKNOWN: + case EM2800_BOARD_UNKNOWN: + /* + * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. + * + * This occurs because they share identical USB vendor and + * product IDs. + * + * What we do here is look up the EEPROM hash of the K-WORLD + * and if it is found then we decide that we do not have + * a DIGIVOX and reset the device to the K-WORLD instead. + * + * This solution is only valid if they do not share eeprom + * hash identities which has not been determined as yet. + */ + if (em28xx_hint_board(dev) < 0) { + dev_err(&dev->intf->dev, "Board not discovered\n"); + } else { + em28xx_set_model(dev); + em28xx_pre_card_setup(dev); + } + break; + default: + em28xx_set_model(dev); + } + + dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n", + dev->board.name, dev->model); + + dev->tuner_type = em28xx_boards[dev->model].tuner_type; + + /* request some modules */ + switch (dev->model) { + case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: + case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: + case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: + case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: + case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: + case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595: + { + struct tveeprom tv; + + if (!dev->eedata) + break; +#if defined(CONFIG_MODULES) && defined(MODULE) + request_module("tveeprom"); +#endif + /* Call first TVeeprom */ + + tveeprom_hauppauge_analog(&tv, dev->eedata); + + dev->tuner_type = tv.tuner_type; + + if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { + dev->i2s_speed = 2048000; + dev->has_msp34xx = 1; + } + break; + } + case EM2882_BOARD_KWORLD_ATSC_315U: + em28xx_write_reg(dev, 0x0d, 0x42); + usleep_range(10000, 11000); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); + usleep_range(10000, 11000); + break; + case EM2820_BOARD_KWORLD_PVRTV2800RF: + /* GPIO enables sound on KWORLD PVR TV 2800RF */ + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); + break; + case EM2820_BOARD_UNKNOWN: + case EM2800_BOARD_UNKNOWN: + /* + * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. + * + * This occurs because they share identical USB vendor and + * product IDs. + * + * What we do here is look up the EEPROM hash of the K-WORLD + * and if it is found then we decide that we do not have + * a DIGIVOX and reset the device to the K-WORLD instead. + * + * This solution is only valid if they do not share eeprom + * hash identities which has not been determined as yet. + */ + case EM2880_BOARD_MSI_DIGIVOX_AD: + if (!em28xx_hint_board(dev)) + em28xx_set_model(dev); + + /* + * In cases where we had to use a board hint, the call to + * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, + * so make the call now so the analog GPIOs are set properly + * before probing the i2c bus. + */ + em28xx_gpio_set(dev, dev->board.tuner_gpio); + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); + break; + + /* + * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. + * + * This occurs because they share identical USB vendor and + * product IDs. + * + * What we do here is look up the EEPROM hash of the Dikom + * and if it is found then we decide that we do not have + * a Kworld and reset the device to the Dikom instead. + * + * This solution is only valid if they do not share eeprom + * hash identities which has not been determined as yet. + */ + case EM2882_BOARD_KWORLD_VS_DVBT: + if (!em28xx_hint_board(dev)) + em28xx_set_model(dev); + + /* + * In cases where we had to use a board hint, the call to + * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, + * so make the call now so the analog GPIOs are set properly + * before probing the i2c bus. + */ + em28xx_gpio_set(dev, dev->board.tuner_gpio); + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); + break; + } + + if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { + dev_err(&dev->intf->dev, + "\n\n" + "The support for this board weren't valid yet.\n" + "Please send a report of having this working\n" + "not to V4L mailing list (and/or to other addresses)\n\n"); + } + + /* Free eeprom data memory */ + kfree(dev->eedata); + dev->eedata = NULL; + + /* Allow override tuner type by a module parameter */ + if (tuner >= 0) + dev->tuner_type = tuner; + + /* + * Dynamically generate a list of valid audio inputs for this + * specific board, mapping them via enum em28xx_amux. + */ + + idx = 0; + for (i = 0; i < MAX_EM28XX_INPUT; i++) { + if (!INPUT(i)->type) + continue; + + /* Skip already mapped audio inputs */ + duplicate_entry = false; + for (j = 0; j < idx; j++) { + if (INPUT(i)->amux == dev->amux_map[j]) { + duplicate_entry = true; + break; + } + } + if (duplicate_entry) + continue; + + dev->amux_map[idx++] = INPUT(i)->amux; + } + for (; idx < MAX_EM28XX_INPUT; idx++) + dev->amux_map[idx] = EM28XX_AMUX_UNUSED; +} + +void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) +{ + memset(ctl, 0, sizeof(*ctl)); + + ctl->fname = XC2028_DEFAULT_FIRMWARE; + ctl->max_len = 64; + ctl->mts = em28xx_boards[dev->model].mts_firmware; + + switch (dev->model) { + case EM2880_BOARD_EMPIRE_DUAL_TV: + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2882_BOARD_TERRATEC_HYBRID_XS: + case EM2880_BOARD_TERRATEC_HYBRID_XS: + case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: + case EM2881_BOARD_PINNACLE_HYBRID_PRO: + case EM2882_BOARD_ZOLID_HYBRID_TV_STICK: + ctl->demod = XC3028_FE_ZARLINK456; + break; + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: + case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: + ctl->demod = XC3028_FE_DEFAULT; + break; + case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: + ctl->demod = XC3028_FE_DEFAULT; + ctl->fname = XC3028L_DEFAULT_FIRMWARE; + break; + case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: + case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: + case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: + /* FIXME: Better to specify the needed IF */ + ctl->demod = XC3028_FE_DEFAULT; + break; + case EM2883_BOARD_KWORLD_HYBRID_330U: + case EM2882_BOARD_DIKOM_DK300: + case EM2882_BOARD_KWORLD_VS_DVBT: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC2028_DEFAULT_FIRMWARE; + break; + case EM2882_BOARD_EVGA_INDTUBE: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC3028L_DEFAULT_FIRMWARE; + break; + default: + ctl->demod = XC3028_FE_OREN538; + } +} +EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); + +static void request_module_async(struct work_struct *work) +{ + struct em28xx *dev = container_of(work, + struct em28xx, request_module_wk); + + /* + * The em28xx extensions can be modules or builtin. If the + * modules are already loaded or are built in, those extensions + * can be initialised right now. Otherwise, the module init + * code will do it. + */ + + /* + * Devices with an audio-only intf also have a V4L/DVB/RC + * intf. Don't register extensions twice on those devices. + */ + if (dev->is_audio_only) { +#if defined(CONFIG_MODULES) && defined(MODULE) + request_module("em28xx-alsa"); +#endif + return; + } + + em28xx_init_extension(dev); + +#if defined(CONFIG_MODULES) && defined(MODULE) + if (dev->has_video) + request_module("em28xx-v4l"); + if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS) + request_module("snd-usb-audio"); + else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) + request_module("em28xx-alsa"); + if (dev->board.has_dvb) + request_module("em28xx-dvb"); + if (dev->board.buttons || + ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) + request_module("em28xx-rc"); +#endif /* CONFIG_MODULES */ +} + +static void request_modules(struct em28xx *dev) +{ + INIT_WORK(&dev->request_module_wk, request_module_async); + schedule_work(&dev->request_module_wk); +} + +static void flush_request_modules(struct em28xx *dev) +{ + flush_work(&dev->request_module_wk); +} + +static int em28xx_media_device_init(struct em28xx *dev, + struct usb_device *udev) +{ +#ifdef CONFIG_MEDIA_CONTROLLER + struct media_device *mdev; + + mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); + if (!mdev) + return -ENOMEM; + + if (udev->product) + media_device_usb_init(mdev, udev, udev->product); + else if (udev->manufacturer) + media_device_usb_init(mdev, udev, udev->manufacturer); + else + media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev)); + + dev->media_dev = mdev; +#endif + return 0; +} + +static void em28xx_unregister_media_device(struct em28xx *dev) +{ +#ifdef CONFIG_MEDIA_CONTROLLER + if (dev->media_dev) { + media_device_unregister(dev->media_dev); + media_device_cleanup(dev->media_dev); + kfree(dev->media_dev); + dev->media_dev = NULL; + } +#endif +} + +/* + * em28xx_release_resources() + * unregisters the v4l2,i2c and usb devices + * called when the device gets disconnected or at module unload + */ +static void em28xx_release_resources(struct em28xx *dev) +{ + struct usb_device *udev = interface_to_usbdev(dev->intf); + + /*FIXME: I2C IR should be disconnected */ + + mutex_lock(&dev->lock); + + em28xx_unregister_media_device(dev); + + if (dev->def_i2c_bus) + em28xx_i2c_unregister(dev, 1); + em28xx_i2c_unregister(dev, 0); + + if (dev->ts == PRIMARY_TS) + usb_put_dev(udev); + + /* Mark device as unused */ + clear_bit(dev->devno, em28xx_devused); + + mutex_unlock(&dev->lock); +}; + +/** + * em28xx_free_device() - Free em28xx device + * + * @ref: struct kref for em28xx device + * + * This is called when all extensions and em28xx core unregisters a device + */ +void em28xx_free_device(struct kref *ref) +{ + struct em28xx *dev = kref_to_dev(ref); + + dev_info(&dev->intf->dev, "Freeing device\n"); + + if (!dev->disconnected) + em28xx_release_resources(dev); + + if (dev->ts == PRIMARY_TS) + kfree(dev->alt_max_pkt_size_isoc); + + kfree(dev); +} +EXPORT_SYMBOL_GPL(em28xx_free_device); + +/* + * em28xx_init_dev() + * allocates and inits the device structs, registers i2c bus and v4l device + */ +static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, + struct usb_interface *intf, + int minor) +{ + int retval; + const char *chip_name = NULL; + + dev->intf = intf; + mutex_init(&dev->ctrl_urb_lock); + spin_lock_init(&dev->slock); + + dev->em28xx_write_regs = em28xx_write_regs; + dev->em28xx_read_reg = em28xx_read_reg; + dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; + dev->em28xx_write_regs_req = em28xx_write_regs_req; + dev->em28xx_read_reg_req = em28xx_read_reg_req; + dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; + + em28xx_set_model(dev); + + dev->wait_after_write = 5; + + /* Based on the Chip ID, set the device configuration */ + retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); + if (retval > 0) { + dev->chip_id = retval; + + switch (dev->chip_id) { + case CHIP_ID_EM2800: + chip_name = "em2800"; + break; + case CHIP_ID_EM2710: + chip_name = "em2710"; + break; + case CHIP_ID_EM2750: + chip_name = "em2750"; + break; + case CHIP_ID_EM2765: + chip_name = "em2765"; + dev->wait_after_write = 0; + dev->is_em25xx = 1; + dev->eeprom_addrwidth_16bit = 1; + break; + case CHIP_ID_EM2820: + chip_name = "em2710/2820"; + if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) { + __le16 idProd = udev->descriptor.idProduct; + + if (le16_to_cpu(idProd) == 0x2710) + chip_name = "em2710"; + else if (le16_to_cpu(idProd) == 0x2820) + chip_name = "em2820"; + } + /* NOTE: the em2820 is used in webcams, too ! */ + break; + case CHIP_ID_EM2840: + chip_name = "em2840"; + break; + case CHIP_ID_EM2860: + chip_name = "em2860"; + break; + case CHIP_ID_EM2870: + chip_name = "em2870"; + dev->wait_after_write = 0; + break; + case CHIP_ID_EM2874: + chip_name = "em2874"; + dev->wait_after_write = 0; + dev->eeprom_addrwidth_16bit = 1; + break; + case CHIP_ID_EM28174: + chip_name = "em28174"; + dev->wait_after_write = 0; + dev->eeprom_addrwidth_16bit = 1; + break; + case CHIP_ID_EM28178: + chip_name = "em28178"; + dev->wait_after_write = 0; + dev->eeprom_addrwidth_16bit = 1; + break; + case CHIP_ID_EM2883: + chip_name = "em2882/3"; + dev->wait_after_write = 0; + break; + case CHIP_ID_EM2884: + chip_name = "em2884"; + dev->wait_after_write = 0; + dev->eeprom_addrwidth_16bit = 1; + break; + } + } + if (!chip_name) + dev_info(&dev->intf->dev, + "unknown em28xx chip ID (%d)\n", dev->chip_id); + else + dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name); + + em28xx_media_device_init(dev, udev); + + if (dev->is_audio_only) { + retval = em28xx_audio_setup(dev); + if (retval) { + retval = -ENODEV; + goto err_deinit_media; + } + em28xx_init_extension(dev); + + return 0; + } + + em28xx_pre_card_setup(dev); + + rt_mutex_init(&dev->i2c_bus_lock); + + /* register i2c bus 0 */ + if (dev->board.is_em2800) + retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); + else + retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); + if (retval < 0) { + dev_err(&dev->intf->dev, + "%s: em28xx_i2c_register bus 0 - error [%d]!\n", + __func__, retval); + goto err_deinit_media; + } + + /* register i2c bus 1 */ + if (dev->def_i2c_bus) { + if (dev->is_em25xx) + retval = em28xx_i2c_register(dev, 1, + EM28XX_I2C_ALGO_EM25XX_BUS_B); + else + retval = em28xx_i2c_register(dev, 1, + EM28XX_I2C_ALGO_EM28XX); + if (retval < 0) { + dev_err(&dev->intf->dev, + "%s: em28xx_i2c_register bus 1 - error [%d]!\n", + __func__, retval); + + goto err_unreg_i2c; + } + } + + /* Do board specific init and eeprom reading */ + em28xx_card_setup(dev); + + return 0; + +err_unreg_i2c: + em28xx_i2c_unregister(dev, 0); +err_deinit_media: + em28xx_unregister_media_device(dev); + return retval; +} + +static int em28xx_duplicate_dev(struct em28xx *dev) +{ + int nr; + struct em28xx *sec_dev = kmemdup(dev, sizeof(*sec_dev), GFP_KERNEL); + + if (!sec_dev) { + dev->dev_next = NULL; + return -ENOMEM; + } + /* Check to see next free device and mark as used */ + do { + nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); + if (nr >= EM28XX_MAXBOARDS) { + /* No free device slots */ + dev_warn(&dev->intf->dev, ": Supports only %i em28xx boards.\n", + EM28XX_MAXBOARDS); + kfree(sec_dev); + dev->dev_next = NULL; + return -ENOMEM; + } + } while (test_and_set_bit(nr, em28xx_devused)); + sec_dev->devno = nr; + snprintf(sec_dev->name, 28, "em28xx #%d", nr); + sec_dev->dev_next = NULL; + dev->dev_next = sec_dev; + return 0; +} + +/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ +#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) + +static void em28xx_check_usb_descriptor(struct em28xx *dev, + struct usb_device *udev, + struct usb_interface *intf, + int alt, int ep, + bool *has_vendor_audio, + bool *has_video, + bool *has_dvb) +{ + const struct usb_endpoint_descriptor *e; + int sizedescr, size; + + /* + * NOTE: + * + * Old logic with support for isoc transfers only was: + * 0x82 isoc => analog + * 0x83 isoc => audio + * 0x84 isoc => digital + * + * New logic with support for bulk transfers + * 0x82 isoc => analog + * 0x82 bulk => analog + * 0x83 isoc* => audio + * 0x84 isoc => digital + * 0x84 bulk => analog or digital** + * 0x85 isoc => digital TS2 + * 0x85 bulk => digital TS2 + * (*: audio should always be isoc) + * (**: analog, if ep 0x82 is isoc, otherwise digital) + * + * The new logic preserves backwards compatibility and + * reflects the endpoint configurations we have seen + * so far. But there might be devices for which this + * logic is not sufficient... + */ + + e = &intf->altsetting[alt].endpoint[ep].desc; + + if (!usb_endpoint_dir_in(e)) + return; + + sizedescr = le16_to_cpu(e->wMaxPacketSize); + size = sizedescr & 0x7ff; + + if (udev->speed == USB_SPEED_HIGH) + size = size * hb_mult(sizedescr); + + /* Only inspect input endpoints */ + + switch (e->bEndpointAddress) { + case 0x82: + *has_video = true; + if (usb_endpoint_xfer_isoc(e)) { + dev->analog_ep_isoc = e->bEndpointAddress; + dev->alt_max_pkt_size_isoc[alt] = size; + } else if (usb_endpoint_xfer_bulk(e)) { + dev->analog_ep_bulk = e->bEndpointAddress; + } + return; + case 0x83: + if (usb_endpoint_xfer_isoc(e)) + *has_vendor_audio = true; + else + dev_err(&intf->dev, + "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); + return; + case 0x84: + if (*has_video && (usb_endpoint_xfer_bulk(e))) { + dev->analog_ep_bulk = e->bEndpointAddress; + } else { + if (usb_endpoint_xfer_isoc(e)) { + if (size > dev->dvb_max_pkt_size_isoc) { + /* + * 2) some manufacturers (e.g. Terratec) + * disable endpoints by setting + * wMaxPacketSize to 0 bytes for all + * alt settings. So far, we've seen + * this for DVB isoc endpoints only. + */ + *has_dvb = true; + dev->dvb_ep_isoc = e->bEndpointAddress; + dev->dvb_max_pkt_size_isoc = size; + dev->dvb_alt_isoc = alt; + } + } else { + *has_dvb = true; + dev->dvb_ep_bulk = e->bEndpointAddress; + } + } + return; + case 0x85: + if (usb_endpoint_xfer_isoc(e)) { + if (size > dev->dvb_max_pkt_size_isoc_ts2) { + dev->dvb_ep_isoc_ts2 = e->bEndpointAddress; + dev->dvb_max_pkt_size_isoc_ts2 = size; + dev->dvb_alt_isoc = alt; + } + } else { + dev->dvb_ep_bulk_ts2 = e->bEndpointAddress; + } + return; + } +} + +/* + * em28xx_usb_probe() + * checks for supported devices + */ +static int em28xx_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev; + struct em28xx *dev = NULL; + int retval; + bool has_vendor_audio = false, has_video = false, has_dvb = false; + int i, nr, try_bulk; + const int ifnum = intf->altsetting[0].desc.bInterfaceNumber; + char *speed; + + udev = usb_get_dev(interface_to_usbdev(intf)); + + /* Check to see next free device and mark as used */ + do { + nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); + if (nr >= EM28XX_MAXBOARDS) { + /* No free device slots */ + dev_err(&intf->dev, + "Driver supports up to %i em28xx boards.\n", + EM28XX_MAXBOARDS); + retval = -ENOMEM; + goto err_no_slot; + } + } while (test_and_set_bit(nr, em28xx_devused)); + + /* Don't register audio interfaces */ + if (intf->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { + dev_info(&intf->dev, + "audio device (%04x:%04x): interface %i, class %i\n", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + ifnum, + intf->altsetting[0].desc.bInterfaceClass); + + retval = -ENODEV; + goto err; + } + + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + retval = -ENOMEM; + goto err; + } + + /* compute alternate max packet sizes */ + dev->alt_max_pkt_size_isoc = kcalloc(intf->num_altsetting, + sizeof(dev->alt_max_pkt_size_isoc[0]), + GFP_KERNEL); + if (!dev->alt_max_pkt_size_isoc) { + kfree(dev); + retval = -ENOMEM; + goto err; + } + + /* Get endpoints */ + for (i = 0; i < intf->num_altsetting; i++) { + int ep; + + for (ep = 0; + ep < intf->altsetting[i].desc.bNumEndpoints; + ep++) + em28xx_check_usb_descriptor(dev, udev, intf, + i, ep, + &has_vendor_audio, + &has_video, + &has_dvb); + } + + if (!(has_vendor_audio || has_video || has_dvb)) { + retval = -ENODEV; + goto err_free; + } + + switch (udev->speed) { + case USB_SPEED_LOW: + speed = "1.5"; + break; + case USB_SPEED_UNKNOWN: + case USB_SPEED_FULL: + speed = "12"; + break; + case USB_SPEED_HIGH: + speed = "480"; + break; + default: + speed = "unknown"; + } + + dev_info(&intf->dev, + "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", + udev->manufacturer ? udev->manufacturer : "", + udev->product ? udev->product : "", + speed, + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + ifnum, + intf->altsetting->desc.bInterfaceNumber); + + /* + * Make sure we have 480 Mbps of bandwidth, otherwise things like + * video stream wouldn't likely work, since 12 Mbps is generally + * not enough even for most Digital TV streams. + */ + if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { + dev_err(&intf->dev, "Device initialization failed.\n"); + dev_err(&intf->dev, + "Device must be connected to a high-speed USB 2.0 port.\n"); + retval = -ENODEV; + goto err_free; + } + + kref_init(&dev->ref); + + dev->devno = nr; + dev->model = id->driver_info; + dev->alt = -1; + dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb); + dev->has_video = has_video; + dev->ifnum = ifnum; + + dev->ts = PRIMARY_TS; + snprintf(dev->name, 28, "em28xx"); + dev->dev_next = NULL; + + if (has_vendor_audio) { + dev_info(&intf->dev, + "Audio interface %i found (Vendor Class)\n", ifnum); + dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; + } + /* Checks if audio is provided by a USB Audio Class intf */ + for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { + struct usb_interface *uif = udev->config->interface[i]; + + if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { + if (has_vendor_audio) + dev_err(&intf->dev, + "em28xx: device seems to have vendor AND usb audio class interfaces !\n" + "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); + dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; + break; + } + } + + if (has_video) + dev_info(&intf->dev, "Video interface %i found:%s%s\n", + ifnum, + dev->analog_ep_bulk ? " bulk" : "", + dev->analog_ep_isoc ? " isoc" : ""); + if (has_dvb) + dev_info(&intf->dev, "DVB interface %i found:%s%s\n", + ifnum, + dev->dvb_ep_bulk ? " bulk" : "", + dev->dvb_ep_isoc ? " isoc" : ""); + + dev->num_alt = intf->num_altsetting; + + if ((unsigned int)card[nr] < em28xx_bcount) + dev->model = card[nr]; + + /* save our data pointer in this intf device */ + usb_set_intfdata(intf, dev); + + /* allocate device struct and check if the device is a webcam */ + mutex_init(&dev->lock); + retval = em28xx_init_dev(dev, udev, intf, nr); + if (retval) + goto err_free; + + if (usb_xfer_mode < 0) { + if (dev->is_webcam) + try_bulk = 1; + else + try_bulk = 0; + } else { + try_bulk = usb_xfer_mode > 0; + } + + /* Disable V4L2 if the device doesn't have a decoder or image sensor */ + if (has_video && + dev->board.decoder == EM28XX_NODECODER && + dev->em28xx_sensor == EM28XX_NOSENSOR) { + dev_err(&intf->dev, + "Currently, V4L2 is not supported on this model\n"); + has_video = false; + dev->has_video = false; + } + + if (dev->board.has_dual_ts && + (dev->tuner_type != TUNER_ABSENT || INPUT(0)->type)) { + /* + * The logic with sets alternate is not ready for dual-tuners + * which analog modes. + */ + dev_err(&intf->dev, + "We currently don't support analog TV or stream capture on dual tuners.\n"); + has_video = false; + } + + /* Select USB transfer types to use */ + if (has_video) { + if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) + dev->analog_xfer_bulk = 1; + dev_info(&intf->dev, "analog set to %s mode.\n", + dev->analog_xfer_bulk ? "bulk" : "isoc"); + } + if (has_dvb) { + if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) + dev->dvb_xfer_bulk = 1; + dev_info(&intf->dev, "dvb set to %s mode.\n", + dev->dvb_xfer_bulk ? "bulk" : "isoc"); + } + + if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) { + kref_init(&dev->dev_next->ref); + + dev->dev_next->ts = SECONDARY_TS; + dev->dev_next->alt = -1; + dev->dev_next->is_audio_only = has_vendor_audio && + !(has_video || has_dvb); + dev->dev_next->has_video = false; + dev->dev_next->ifnum = ifnum; + dev->dev_next->model = id->driver_info; + + mutex_init(&dev->dev_next->lock); + retval = em28xx_init_dev(dev->dev_next, udev, intf, + dev->dev_next->devno); + if (retval) + goto err_free; + + dev->dev_next->board.ir_codes = NULL; /* No IR for 2nd tuner */ + dev->dev_next->board.has_ir_i2c = 0; /* No IR for 2nd tuner */ + + if (usb_xfer_mode < 0) { + if (dev->dev_next->is_webcam) + try_bulk = 1; + else + try_bulk = 0; + } else { + try_bulk = usb_xfer_mode > 0; + } + + /* Select USB transfer types to use */ + if (has_dvb) { + if (!dev->dvb_ep_isoc_ts2 || + (try_bulk && dev->dvb_ep_bulk_ts2)) + dev->dev_next->dvb_xfer_bulk = 1; + dev_info(&dev->intf->dev, "dvb ts2 set to %s mode.\n", + dev->dev_next->dvb_xfer_bulk ? "bulk" : "isoc"); + } + + dev->dev_next->dvb_ep_isoc = dev->dvb_ep_isoc_ts2; + dev->dev_next->dvb_ep_bulk = dev->dvb_ep_bulk_ts2; + dev->dev_next->dvb_max_pkt_size_isoc = dev->dvb_max_pkt_size_isoc_ts2; + dev->dev_next->dvb_alt_isoc = dev->dvb_alt_isoc; + + /* Configure hardware to support TS2*/ + if (dev->dvb_xfer_bulk) { + /* The ep4 and ep5 are configured for BULK */ + em28xx_write_reg(dev, 0x0b, 0x96); + mdelay(100); + em28xx_write_reg(dev, 0x0b, 0x80); + mdelay(100); + } else { + /* The ep4 and ep5 are configured for ISO */ + em28xx_write_reg(dev, 0x0b, 0x96); + mdelay(100); + em28xx_write_reg(dev, 0x0b, 0x82); + mdelay(100); + } + } + + request_modules(dev); + + /* + * Do it at the end, to reduce dynamic configuration changes during + * the device init. Yet, as request_modules() can be async, the + * topology will likely change after the load of the em28xx subdrivers. + */ +#ifdef CONFIG_MEDIA_CONTROLLER + retval = media_device_register(dev->media_dev); +#endif + + return 0; + +err_free: + kfree(dev->alt_max_pkt_size_isoc); + kfree(dev); + +err: + clear_bit(nr, em28xx_devused); + +err_no_slot: + usb_put_dev(udev); + return retval; +} + +/* + * em28xx_usb_disconnect() + * called when the device gets disconnected + * video device will be unregistered on v4l2_close in case it is still open + */ +static void em28xx_usb_disconnect(struct usb_interface *intf) +{ + struct em28xx *dev; + + dev = usb_get_intfdata(intf); + usb_set_intfdata(intf, NULL); + + if (!dev) + return; + + if (dev->dev_next) { + dev->dev_next->disconnected = 1; + dev_info(&dev->intf->dev, "Disconnecting %s\n", + dev->dev_next->name); + } + + dev->disconnected = 1; + + dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->name); + + flush_request_modules(dev); + + em28xx_close_extension(dev); + + if (dev->dev_next) + em28xx_release_resources(dev->dev_next); + em28xx_release_resources(dev); + + if (dev->dev_next) { + kref_put(&dev->dev_next->ref, em28xx_free_device); + dev->dev_next = NULL; + } + kref_put(&dev->ref, em28xx_free_device); +} + +static int em28xx_usb_suspend(struct usb_interface *intf, + pm_message_t message) +{ + struct em28xx *dev; + + dev = usb_get_intfdata(intf); + if (!dev) + return 0; + em28xx_suspend_extension(dev); + return 0; +} + +static int em28xx_usb_resume(struct usb_interface *intf) +{ + struct em28xx *dev; + + dev = usb_get_intfdata(intf); + if (!dev) + return 0; + em28xx_resume_extension(dev); + return 0; +} + +static struct usb_driver em28xx_usb_driver = { + .name = "em28xx", + .probe = em28xx_usb_probe, + .disconnect = em28xx_usb_disconnect, + .suspend = em28xx_usb_suspend, + .resume = em28xx_usb_resume, + .reset_resume = em28xx_usb_resume, + .id_table = em28xx_id_table, +}; + +module_usb_driver(em28xx_usb_driver); |