diff options
Diffstat (limited to 'drivers/message/fusion/lsi/mpi_sas.h')
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_sas.h | 279 |
1 files changed, 279 insertions, 0 deletions
diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h new file mode 100644 index 000000000..56013f288 --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_sas.h @@ -0,0 +1,279 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2004-2008 LSI Corporation. + * + * + * Name: mpi_sas.h + * Title: MPI Serial Attached SCSI structures and definitions + * Creation Date: August 19, 2004 + * + * mpi_sas.h Version: 01.05.05 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 08-19-04 01.05.01 Original release. + * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. + * Added PrimFlags and Primitive field to SAS IO Unit + * Control request, and added a new operation code. + * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal, + * and Remove Device operations to SAS IO Unit Control. + * Added DevHandle field to SAS IO Unit Control request and + * reply. + * 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO + * Unit Control request. + * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER, + * including adding IOCParameter and IOCParameter value + * fields to SAS IO Unit Control Request. + * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_SAS_H +#define MPI_SAS_H + + +/* + * Values for SASStatus. + */ +#define MPI_SASSTATUS_SUCCESS (0x00) +#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01) +#define MPI_SASSTATUS_INVALID_FRAME (0x02) +#define MPI_SASSTATUS_UTC_BAD_DEST (0x03) +#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04) +#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) +#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) +#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) +#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) +#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09) +#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) +#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) +#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) +#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) +#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) +#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) +#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) +#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11) +#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12) +#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) +#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) + + +/* + * Values for the SAS DeviceInfo field used in SAS Device Status Change Event + * data and SAS IO Unit Configuration pages. + */ +#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC (0xF0000000) + +#define MPI_SAS_DEVICE_INFO_SEP (0x00004000) +#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) +#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) +#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) +#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) +#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200) +#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) +#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) +#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) +#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) +#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) +#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008) + +#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) +#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) +#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001) +#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) +#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) + + + +/***************************************************************************** +* +* S e r i a l A t t a c h e d S C S I M e s s a g e s +* +*****************************************************************************/ + +/****************************************************************************/ +/* Serial Management Protocol Passthrough Request */ +/****************************************************************************/ + +typedef struct _MSG_SMP_PASSTHROUGH_REQUEST +{ + U8 PassthroughFlags; /* 00h */ + U8 PhysicalPort; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 RequestDataLength; /* 04h */ + U8 ConnectionRate; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved1; /* 0Ch */ + U64 SASAddress; /* 10h */ + U32 Reserved2; /* 18h */ + U32 Reserved3; /* 1Ch */ + SGE_SIMPLE_UNION SGL; /* 20h */ +} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST, + SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t; + +/* values for PassthroughFlags field */ +#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) + +/* values for ConnectionRate field */ +#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) +#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08) +#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09) + + +/* Serial Management Protocol Passthrough Reply */ +typedef struct _MSG_SMP_PASSTHROUGH_REPLY +{ + U8 PassthroughFlags; /* 00h */ + U8 PhysicalPort; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 ResponseDataLength; /* 04h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Reserved2; /* 0Ch */ + U8 SASStatus; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 Reserved3; /* 14h */ + U8 ResponseData[4]; /* 18h */ +} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY, + SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t; + +#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) + + +/****************************************************************************/ +/* SATA Passthrough Request */ +/****************************************************************************/ + +typedef struct _MSG_SATA_PASSTHROUGH_REQUEST +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 PassthroughFlags; /* 04h */ + U8 ConnectionRate; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved1; /* 0Ch */ + U32 Reserved2; /* 10h */ + U32 Reserved3; /* 14h */ + U32 DataLength; /* 18h */ + U8 CommandFIS[20]; /* 1Ch */ + SGE_SIMPLE_UNION SGL; /* 30h */ +} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST, + SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t; + +/* values for PassthroughFlags field */ +#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200) +#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) +#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080) +#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040) +#define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) +#define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) +#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) +#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) +#define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001) + +/* values for ConnectionRate field */ +#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) +#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08) +#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09) + + +/* SATA Passthrough Reply */ +typedef struct _MSG_SATA_PASSTHROUGH_REPLY +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 PassthroughFlags; /* 04h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Reserved2; /* 0Ch */ + U8 SASStatus; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U8 StatusFIS[20]; /* 14h */ + U32 StatusControlRegisters; /* 28h */ + U32 TransferCount; /* 2Ch */ +} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY, + SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t; + + + + +/****************************************************************************/ +/* SAS IO Unit Control Request */ +/****************************************************************************/ + +typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST +{ + U8 Operation; /* 00h */ + U8 Reserved1; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 DevHandle; /* 04h */ + U8 IOCParameter; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 TargetID; /* 0Ch */ + U8 Bus; /* 0Dh */ + U8 PhyNum; /* 0Eh */ + U8 PrimFlags; /* 0Fh */ + U32 Primitive; /* 10h */ + U64 SASAddress; /* 14h */ + U32 IOCParameterValue; /* 1Ch */ +} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST, + SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t; + +/* values for the Operation field */ +#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01) +#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI_SAS_OP_PHY_LINK_RESET (0x06) +#define MPI_SAS_OP_PHY_HARD_RESET (0x07) +#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI_SAS_OP_MAP_CURRENT (0x09) +#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A) +#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) +#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */ +#define MPI_SAS_OP_REMOVE_DEVICE (0x0D) +#define MPI_SAS_OP_SET_IOC_PARAMETER (0x0E) +#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) + +/* values for the PrimFlags field */ +#define MPI_SAS_PRIMFLAGS_SINGLE (0x08) +#define MPI_SAS_PRIMFLAGS_TRIPLE (0x02) +#define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01) + + +/* SAS IO Unit Control Reply */ +typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY +{ + U8 Operation; /* 00h */ + U8 Reserved1; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 DevHandle; /* 04h */ + U8 IOCParameter; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY, + SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t; + +#endif + + |