summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/alacritech
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/alacritech')
-rw-r--r--drivers/net/ethernet/alacritech/Kconfig29
-rw-r--r--drivers/net/ethernet/alacritech/Makefile5
-rw-r--r--drivers/net/ethernet/alacritech/slic.h573
-rw-r--r--drivers/net/ethernet/alacritech/slicoss.c1852
4 files changed, 2459 insertions, 0 deletions
diff --git a/drivers/net/ethernet/alacritech/Kconfig b/drivers/net/ethernet/alacritech/Kconfig
new file mode 100644
index 000000000..5f285e18f
--- /dev/null
+++ b/drivers/net/ethernet/alacritech/Kconfig
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NET_VENDOR_ALACRITECH
+ bool "Alacritech devices"
+ default y
+ help
+ If you have a network (Ethernet) card belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all the
+ questions about Alacritech devices. If you say Y, you will be asked
+ for your specific device in the following questions.
+
+if NET_VENDOR_ALACRITECH
+
+config SLICOSS
+ tristate "Alacritech Slicoss support"
+ depends on PCI
+ select CRC32
+ help
+ This driver supports Gigabit Ethernet adapters based on the
+ Session Layer Interface (SLIC) technology by Alacritech.
+
+ Supported are Mojave (1 port) and Oasis (1, 2 and 4 port) cards,
+ both copper and fiber.
+
+ To compile this driver as a module, choose M here: the module
+ will be called slicoss. This is recommended.
+
+endif # NET_VENDOR_ALACRITECH
diff --git a/drivers/net/ethernet/alacritech/Makefile b/drivers/net/ethernet/alacritech/Makefile
new file mode 100644
index 000000000..4378aadf8
--- /dev/null
+++ b/drivers/net/ethernet/alacritech/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the Alacritech Slicoss driver
+#
+obj-$(CONFIG_SLICOSS) += slicoss.o
diff --git a/drivers/net/ethernet/alacritech/slic.h b/drivers/net/ethernet/alacritech/slic.h
new file mode 100644
index 000000000..4eecbdfff
--- /dev/null
+++ b/drivers/net/ethernet/alacritech/slic.h
@@ -0,0 +1,573 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _SLIC_H
+#define _SLIC_H
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/spinlock_types.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/u64_stats_sync.h>
+
+#define SLIC_VGBSTAT_XPERR 0x40000000
+#define SLIC_VGBSTAT_XERRSHFT 25
+#define SLIC_VGBSTAT_XCSERR 0x23
+#define SLIC_VGBSTAT_XUFLOW 0x22
+#define SLIC_VGBSTAT_XHLEN 0x20
+#define SLIC_VGBSTAT_NETERR 0x01000000
+#define SLIC_VGBSTAT_NERRSHFT 16
+#define SLIC_VGBSTAT_NERRMSK 0x1ff
+#define SLIC_VGBSTAT_NCSERR 0x103
+#define SLIC_VGBSTAT_NUFLOW 0x102
+#define SLIC_VGBSTAT_NHLEN 0x100
+#define SLIC_VGBSTAT_LNKERR 0x00000080
+#define SLIC_VGBSTAT_LERRMSK 0xff
+#define SLIC_VGBSTAT_LDEARLY 0x86
+#define SLIC_VGBSTAT_LBOFLO 0x85
+#define SLIC_VGBSTAT_LCODERR 0x84
+#define SLIC_VGBSTAT_LDBLNBL 0x83
+#define SLIC_VGBSTAT_LCRCERR 0x82
+#define SLIC_VGBSTAT_LOFLO 0x81
+#define SLIC_VGBSTAT_LUFLO 0x80
+
+#define SLIC_IRHDDR_FLEN_MSK 0x0000ffff
+#define SLIC_IRHDDR_SVALID 0x80000000
+#define SLIC_IRHDDR_ERR 0x10000000
+
+#define SLIC_VRHSTAT_802OE 0x80000000
+#define SLIC_VRHSTAT_TPOFLO 0x10000000
+#define SLIC_VRHSTATB_802UE 0x80000000
+#define SLIC_VRHSTATB_RCVE 0x40000000
+#define SLIC_VRHSTATB_BUFF 0x20000000
+#define SLIC_VRHSTATB_CARRE 0x08000000
+#define SLIC_VRHSTATB_LONGE 0x02000000
+#define SLIC_VRHSTATB_PREA 0x01000000
+#define SLIC_VRHSTATB_CRC 0x00800000
+#define SLIC_VRHSTATB_DRBL 0x00400000
+#define SLIC_VRHSTATB_CODE 0x00200000
+#define SLIC_VRHSTATB_TPCSUM 0x00100000
+#define SLIC_VRHSTATB_TPHLEN 0x00080000
+#define SLIC_VRHSTATB_IPCSUM 0x00040000
+#define SLIC_VRHSTATB_IPLERR 0x00020000
+#define SLIC_VRHSTATB_IPHERR 0x00010000
+
+#define SLIC_CMD_XMT_REQ 0x01
+#define SLIC_CMD_TYPE_DUMB 3
+
+#define SLIC_RESET_MAGIC 0xDEAD
+#define SLIC_ICR_INT_OFF 0
+#define SLIC_ICR_INT_ON 1
+#define SLIC_ICR_INT_MASK 2
+
+#define SLIC_ISR_ERR 0x80000000
+#define SLIC_ISR_RCV 0x40000000
+#define SLIC_ISR_CMD 0x20000000
+#define SLIC_ISR_IO 0x60000000
+#define SLIC_ISR_UPC 0x10000000
+#define SLIC_ISR_LEVENT 0x08000000
+#define SLIC_ISR_RMISS 0x02000000
+#define SLIC_ISR_UPCERR 0x01000000
+#define SLIC_ISR_XDROP 0x00800000
+#define SLIC_ISR_UPCBSY 0x00020000
+
+#define SLIC_ISR_PING_MASK 0x00700000
+#define SLIC_ISR_UPCERR_MASK (SLIC_ISR_UPCERR | SLIC_ISR_UPCBSY)
+#define SLIC_ISR_UPC_MASK (SLIC_ISR_UPC | SLIC_ISR_UPCERR_MASK)
+#define SLIC_WCS_START 0x80000000
+#define SLIC_WCS_COMPARE 0x40000000
+#define SLIC_RCVWCS_BEGIN 0x40000000
+#define SLIC_RCVWCS_FINISH 0x80000000
+
+#define SLIC_MIICR_REG_16 0x00100000
+#define SLIC_MRV_REG16_XOVERON 0x0068
+
+#define SLIC_GIG_LINKUP 0x0001
+#define SLIC_GIG_FULLDUPLEX 0x0002
+#define SLIC_GIG_SPEED_MASK 0x000C
+#define SLIC_GIG_SPEED_1000 0x0008
+#define SLIC_GIG_SPEED_100 0x0004
+#define SLIC_GIG_SPEED_10 0x0000
+
+#define SLIC_GMCR_RESET 0x80000000
+#define SLIC_GMCR_GBIT 0x20000000
+#define SLIC_GMCR_FULLD 0x10000000
+#define SLIC_GMCR_GAPBB_SHIFT 14
+#define SLIC_GMCR_GAPR1_SHIFT 7
+#define SLIC_GMCR_GAPR2_SHIFT 0
+#define SLIC_GMCR_GAPBB_1000 0x60
+#define SLIC_GMCR_GAPR1_1000 0x2C
+#define SLIC_GMCR_GAPR2_1000 0x40
+#define SLIC_GMCR_GAPBB_100 0x70
+#define SLIC_GMCR_GAPR1_100 0x2C
+#define SLIC_GMCR_GAPR2_100 0x40
+
+#define SLIC_XCR_RESET 0x80000000
+#define SLIC_XCR_XMTEN 0x40000000
+#define SLIC_XCR_PAUSEEN 0x20000000
+#define SLIC_XCR_LOADRNG 0x10000000
+
+#define SLIC_GXCR_RESET 0x80000000
+#define SLIC_GXCR_XMTEN 0x40000000
+#define SLIC_GXCR_PAUSEEN 0x20000000
+
+#define SLIC_GRCR_RESET 0x80000000
+#define SLIC_GRCR_RCVEN 0x40000000
+#define SLIC_GRCR_RCVALL 0x20000000
+#define SLIC_GRCR_RCVBAD 0x10000000
+#define SLIC_GRCR_CTLEN 0x08000000
+#define SLIC_GRCR_ADDRAEN 0x02000000
+#define SLIC_GRCR_HASHSIZE_SHIFT 17
+#define SLIC_GRCR_HASHSIZE 14
+
+/* Reset Register */
+#define SLIC_REG_RESET 0x0000
+/* Interrupt Control Register */
+#define SLIC_REG_ICR 0x0008
+/* Interrupt status pointer */
+#define SLIC_REG_ISP 0x0010
+/* Interrupt status */
+#define SLIC_REG_ISR 0x0018
+/* Header buffer address reg
+ * 31-8 - phy addr of set of contiguous hdr buffers
+ * 7-0 - number of buffers passed
+ * Buffers are 256 bytes long on 256-byte boundaries.
+ */
+#define SLIC_REG_HBAR 0x0020
+/* Data buffer handle & address reg
+ * 4 sets of registers; Buffers are 2K bytes long 2 per 4K page.
+ */
+#define SLIC_REG_DBAR 0x0028
+/* Xmt Cmd buf addr regs.
+ * 1 per XMT interface
+ * 31-5 - phy addr of host command buffer
+ * 4-0 - length of cmd in multiples of 32 bytes
+ * Buffers are 32 bytes up to 512 bytes long
+ */
+#define SLIC_REG_CBAR 0x0030
+/* Write control store */
+#define SLIC_REG_WCS 0x0034
+/*Response buffer address reg.
+ * 31-8 - phy addr of set of contiguous response buffers
+ * 7-0 - number of buffers passed
+ * Buffers are 32 bytes long on 32-byte boundaries.
+ */
+#define SLIC_REG_RBAR 0x0038
+/* Read statistics (UPR) */
+#define SLIC_REG_RSTAT 0x0040
+/* Read link status */
+#define SLIC_REG_LSTAT 0x0048
+/* Write Mac Config */
+#define SLIC_REG_WMCFG 0x0050
+/* Write phy register */
+#define SLIC_REG_WPHY 0x0058
+/* Rcv Cmd buf addr reg */
+#define SLIC_REG_RCBAR 0x0060
+/* Read SLIC Config*/
+#define SLIC_REG_RCONFIG 0x0068
+/* Interrupt aggregation time */
+#define SLIC_REG_INTAGG 0x0070
+/* Write XMIT config reg */
+#define SLIC_REG_WXCFG 0x0078
+/* Write RCV config reg */
+#define SLIC_REG_WRCFG 0x0080
+/* Write rcv addr a low */
+#define SLIC_REG_WRADDRAL 0x0088
+/* Write rcv addr a high */
+#define SLIC_REG_WRADDRAH 0x0090
+/* Write rcv addr b low */
+#define SLIC_REG_WRADDRBL 0x0098
+/* Write rcv addr b high */
+#define SLIC_REG_WRADDRBH 0x00a0
+/* Low bits of mcast mask */
+#define SLIC_REG_MCASTLOW 0x00a8
+/* High bits of mcast mask */
+#define SLIC_REG_MCASTHIGH 0x00b0
+/* Ping the card */
+#define SLIC_REG_PING 0x00b8
+/* Dump command */
+#define SLIC_REG_DUMP_CMD 0x00c0
+/* Dump data pointer */
+#define SLIC_REG_DUMP_DATA 0x00c8
+/* Read card's pci_status register */
+#define SLIC_REG_PCISTATUS 0x00d0
+/* Write hostid field */
+#define SLIC_REG_WRHOSTID 0x00d8
+/* Put card in a low power state */
+#define SLIC_REG_LOW_POWER 0x00e0
+/* Force slic into quiescent state before soft reset */
+#define SLIC_REG_QUIESCE 0x00e8
+/* Reset interface queues */
+#define SLIC_REG_RESET_IFACE 0x00f0
+/* Register is only written when it has changed.
+ * Bits 63-32 for host i/f addrs.
+ */
+#define SLIC_REG_ADDR_UPPER 0x00f8
+/* 64 bit Header buffer address reg */
+#define SLIC_REG_HBAR64 0x0100
+/* 64 bit Data buffer handle & address reg */
+#define SLIC_REG_DBAR64 0x0108
+/* 64 bit Xmt Cmd buf addr regs. */
+#define SLIC_REG_CBAR64 0x0110
+/* 64 bit Response buffer address reg.*/
+#define SLIC_REG_RBAR64 0x0118
+/* 64 bit Rcv Cmd buf addr reg*/
+#define SLIC_REG_RCBAR64 0x0120
+/* Read statistics (64 bit UPR) */
+#define SLIC_REG_RSTAT64 0x0128
+/* Download Gigabit RCV sequencer ucode */
+#define SLIC_REG_RCV_WCS 0x0130
+/* Write VlanId field */
+#define SLIC_REG_WRVLANID 0x0138
+/* Read Transformer info */
+#define SLIC_REG_READ_XF_INFO 0x0140
+/* Write Transformer info */
+#define SLIC_REG_WRITE_XF_INFO 0x0148
+/* Write card ticks per second */
+#define SLIC_REG_TICKS_PER_SEC 0x0170
+#define SLIC_REG_HOSTID 0x1554
+
+#define PCI_VENDOR_ID_ALACRITECH 0x139A
+#define PCI_DEVICE_ID_ALACRITECH_MOJAVE 0x0005
+#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1 0x0005
+#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1_2 0x0006
+#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1F 0x0007
+#define PCI_SUBDEVICE_ID_ALACRITECH_CICADA 0x0008
+#define PCI_SUBDEVICE_ID_ALACRITECH_SES1001T 0x2006
+#define PCI_SUBDEVICE_ID_ALACRITECH_SES1001F 0x2007
+#define PCI_DEVICE_ID_ALACRITECH_OASIS 0x0007
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XT 0x000B
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XF 0x000C
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XT 0x000D
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XF 0x000E
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2104EF 0x000F
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2104ET 0x0010
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2102EF 0x0011
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2102ET 0x0012
+
+/* Note: power of two required for number descriptors */
+#define SLIC_NUM_RX_LES 256
+#define SLIC_RX_BUFF_SIZE 2048
+#define SLIC_RX_BUFF_ALIGN 256
+#define SLIC_RX_BUFF_HDR_SIZE 34
+#define SLIC_MAX_REQ_RX_DESCS 1
+
+#define SLIC_NUM_TX_DESCS 256
+#define SLIC_TX_DESC_ALIGN 32
+#define SLIC_MIN_TX_WAKEUP_DESCS 10
+#define SLIC_MAX_REQ_TX_DESCS 1
+#define SLIC_MAX_TX_COMPLETIONS 100
+
+#define SLIC_NUM_STAT_DESCS 128
+#define SLIC_STATS_DESC_ALIGN 256
+
+#define SLIC_NUM_STAT_DESC_ARRAYS 4
+#define SLIC_INVALID_STAT_DESC_IDX 0xffffffff
+
+#define SLIC_UPR_LSTAT 0
+#define SLIC_UPR_CONFIG 1
+
+#define SLIC_EEPROM_SIZE 128
+#define SLIC_EEPROM_MAGIC 0xa5a5
+
+#define SLIC_FIRMWARE_MOJAVE "slicoss/gbdownload.sys"
+#define SLIC_FIRMWARE_OASIS "slicoss/oasisdownload.sys"
+#define SLIC_RCV_FIRMWARE_MOJAVE "slicoss/gbrcvucode.sys"
+#define SLIC_RCV_FIRMWARE_OASIS "slicoss/oasisrcvucode.sys"
+#define SLIC_FIRMWARE_MIN_SIZE 64
+#define SLIC_FIRMWARE_MAX_SECTIONS 3
+
+#define SLIC_MODEL_MOJAVE 0
+#define SLIC_MODEL_OASIS 1
+
+#define SLIC_INC_STATS_COUNTER(st, counter) \
+do { \
+ u64_stats_update_begin(&(st)->syncp); \
+ (st)->counter++; \
+ u64_stats_update_end(&(st)->syncp); \
+} while (0)
+
+#define SLIC_GET_STATS_COUNTER(newst, st, counter) \
+{ \
+ unsigned int start; \
+ do { \
+ start = u64_stats_fetch_begin_irq(&(st)->syncp); \
+ newst = (st)->counter; \
+ } while (u64_stats_fetch_retry_irq(&(st)->syncp, start)); \
+}
+
+struct slic_upr {
+ dma_addr_t paddr;
+ unsigned int type;
+ struct list_head list;
+};
+
+struct slic_upr_list {
+ bool pending;
+ struct list_head list;
+ /* upr list lock */
+ spinlock_t lock;
+};
+
+/* SLIC EEPROM structure for Mojave */
+struct slic_mojave_eeprom {
+ __le16 id; /* 00 EEPROM/FLASH Magic code 'A5A5'*/
+ __le16 eeprom_code_size;/* 01 Size of EEPROM Codes (bytes * 4)*/
+ __le16 flash_size; /* 02 Flash size */
+ __le16 eeprom_size; /* 03 EEPROM Size */
+ __le16 vendor_id; /* 04 Vendor ID */
+ __le16 dev_id; /* 05 Device ID */
+ u8 rev_id; /* 06 Revision ID */
+ u8 class_code[3]; /* 07 Class Code */
+ u8 irqpin_dbg; /* 08 Debug Interrupt pin */
+ u8 irqpin; /* Network Interrupt Pin */
+ u8 min_grant; /* 09 Minimum grant */
+ u8 max_lat; /* Maximum Latency */
+ __le16 pci_stat; /* 10 PCI Status */
+ __le16 sub_vendor_id; /* 11 Subsystem Vendor Id */
+ __le16 sub_id; /* 12 Subsystem ID */
+ __le16 dev_id_dbg; /* 13 Debug Device Id */
+ __le16 ramrom; /* 14 Dram/Rom function */
+ __le16 dram_size2pci; /* 15 DRAM size to PCI (bytes * 64K) */
+ __le16 rom_size2pci; /* 16 ROM extension size to PCI (bytes * 4k) */
+ u8 pad[2]; /* 17 Padding */
+ u8 freetime; /* 18 FreeTime setting */
+ u8 ifctrl; /* 10-bit interface control (Mojave only) */
+ __le16 dram_size; /* 19 DRAM size (bytes * 64k) */
+ u8 mac[ETH_ALEN]; /* 20 MAC addresses */
+ u8 mac2[ETH_ALEN];
+ u8 pad2[6];
+ u16 dev_id2; /* Device ID for 2nd PCI function */
+ u8 irqpin2; /* Interrupt pin for 2nd PCI function */
+ u8 class_code2[3]; /* Class Code for 2nd PCI function */
+ u16 cfg_byte6; /* Config Byte 6 */
+ u16 pme_cap; /* Power Mgment capabilities */
+ u16 nwclk_ctrl; /* NetworkClockControls */
+ u8 fru_format; /* Alacritech FRU format type */
+ u8 fru_assembly[6]; /* Alacritech FRU information */
+ u8 fru_rev[2];
+ u8 fru_serial[14];
+ u8 fru_pad[3];
+ u8 oem_fru[28]; /* optional OEM FRU format type */
+ u8 pad3[4]; /* Pad to 128 bytes - includes 2 cksum bytes
+ * (if OEM FRU info exists) and two unusable
+ * bytes at the end
+ */
+};
+
+/* SLIC EEPROM structure for Oasis */
+struct slic_oasis_eeprom {
+ __le16 id; /* 00 EEPROM/FLASH Magic code 'A5A5' */
+ __le16 eeprom_code_size;/* 01 Size of EEPROM Codes (bytes * 4)*/
+ __le16 spidev0_cfg; /* 02 Flash Config for SPI device 0 */
+ __le16 spidev1_cfg; /* 03 Flash Config for SPI device 1 */
+ __le16 vendor_id; /* 04 Vendor ID */
+ __le16 dev_id; /* 05 Device ID (function 0) */
+ u8 rev_id; /* 06 Revision ID */
+ u8 class_code0[3]; /* 07 Class Code for PCI function 0 */
+ u8 irqpin1; /* 08 Interrupt pin for PCI function 1*/
+ u8 class_code1[3]; /* 09 Class Code for PCI function 1 */
+ u8 irqpin2; /* 10 Interrupt pin for PCI function 2*/
+ u8 irqpin0; /* Interrupt pin for PCI function 0*/
+ u8 min_grant; /* 11 Minimum grant */
+ u8 max_lat; /* Maximum Latency */
+ __le16 sub_vendor_id; /* 12 Subsystem Vendor Id */
+ __le16 sub_id; /* 13 Subsystem ID */
+ __le16 flash_size; /* 14 Flash size (bytes / 4K) */
+ __le16 dram_size2pci; /* 15 DRAM size to PCI (bytes / 64K) */
+ __le16 rom_size2pci; /* 16 Flash (ROM extension) size to PCI
+ * (bytes / 4K)
+ */
+ __le16 dev_id1; /* 17 Device Id (function 1) */
+ __le16 dev_id2; /* 18 Device Id (function 2) */
+ __le16 dev_stat_cfg; /* 19 Device Status Config Bytes 6-7 */
+ __le16 pme_cap; /* 20 Power Mgment capabilities */
+ u8 msi_cap; /* 21 MSI capabilities */
+ u8 clock_div; /* Clock divider */
+ __le16 pci_stat_lo; /* 22 PCI Status bits 15:0 */
+ __le16 pci_stat_hi; /* 23 PCI Status bits 31:16 */
+ __le16 dram_cfg_lo; /* 24 DRAM Configuration bits 15:0 */
+ __le16 dram_cfg_hi; /* 25 DRAM Configuration bits 31:16 */
+ __le16 dram_size; /* 26 DRAM size (bytes / 64K) */
+ __le16 gpio_tbi_ctrl; /* 27 GPIO/TBI controls for functions 1/0 */
+ __le16 eeprom_size; /* 28 EEPROM Size */
+ u8 mac[ETH_ALEN]; /* 29 MAC addresses (2 ports) */
+ u8 mac2[ETH_ALEN];
+ u8 fru_format; /* 35 Alacritech FRU format type */
+ u8 fru_assembly[6]; /* Alacritech FRU information */
+ u8 fru_rev[2];
+ u8 fru_serial[14];
+ u8 fru_pad[3];
+ u8 oem_fru[28]; /* optional OEM FRU information */
+ u8 pad[4]; /* Pad to 128 bytes - includes 2 checksum bytes
+ * (if OEM FRU info exists) and two unusable
+ * bytes at the end
+ */
+};
+
+struct slic_stats {
+ u64 rx_packets;
+ u64 rx_bytes;
+ u64 rx_mcasts;
+ u64 rx_errors;
+ u64 tx_packets;
+ u64 tx_bytes;
+ /* HW STATS */
+ u64 rx_buff_miss;
+ u64 tx_dropped;
+ u64 irq_errs;
+ /* transport layer */
+ u64 rx_tpcsum;
+ u64 rx_tpoflow;
+ u64 rx_tphlen;
+ /* ip layer */
+ u64 rx_ipcsum;
+ u64 rx_iplen;
+ u64 rx_iphlen;
+ /* link layer */
+ u64 rx_early;
+ u64 rx_buffoflow;
+ u64 rx_lcode;
+ u64 rx_drbl;
+ u64 rx_crc;
+ u64 rx_oflow802;
+ u64 rx_uflow802;
+ /* oasis only */
+ u64 tx_carrier;
+ struct u64_stats_sync syncp;
+};
+
+struct slic_shmem_data {
+ __le32 isr;
+ __le32 link;
+};
+
+struct slic_shmem {
+ dma_addr_t isr_paddr;
+ dma_addr_t link_paddr;
+ struct slic_shmem_data *shmem_data;
+};
+
+struct slic_rx_info_oasis {
+ __le32 frame_status;
+ __le32 frame_status_b;
+ __le32 time_stamp;
+ __le32 checksum;
+};
+
+struct slic_rx_info_mojave {
+ __le32 frame_status;
+ __le16 byte_cnt;
+ __le16 tp_chksum;
+ __le16 ctx_hash;
+ __le16 mac_hash;
+ __le16 buff_lnk;
+};
+
+struct slic_stat_desc {
+ __le32 hnd;
+ __u8 pad[8];
+ __le32 status;
+ __u8 pad2[16];
+};
+
+struct slic_stat_queue {
+ struct slic_stat_desc *descs[SLIC_NUM_STAT_DESC_ARRAYS];
+ dma_addr_t paddr[SLIC_NUM_STAT_DESC_ARRAYS];
+ unsigned int addr_offset[SLIC_NUM_STAT_DESC_ARRAYS];
+ unsigned int active_array;
+ unsigned int len;
+ unsigned int done_idx;
+ size_t mem_size;
+};
+
+struct slic_tx_desc {
+ __le32 hnd;
+ __le32 rsvd;
+ u8 cmd;
+ u8 flags;
+ __le16 rsvd2;
+ __le32 totlen;
+ __le32 paddrl;
+ __le32 paddrh;
+ __le32 len;
+ __le32 type;
+};
+
+struct slic_tx_buffer {
+ struct sk_buff *skb;
+ DEFINE_DMA_UNMAP_ADDR(map_addr);
+ DEFINE_DMA_UNMAP_LEN(map_len);
+ struct slic_tx_desc *desc;
+ dma_addr_t desc_paddr;
+};
+
+struct slic_tx_queue {
+ struct dma_pool *dma_pool;
+ struct slic_tx_buffer *txbuffs;
+ unsigned int len;
+ unsigned int put_idx;
+ unsigned int done_idx;
+};
+
+struct slic_rx_desc {
+ u8 pad[16];
+ __le32 buffer;
+ __le32 length;
+ __le32 status;
+};
+
+struct slic_rx_buffer {
+ struct sk_buff *skb;
+ DEFINE_DMA_UNMAP_ADDR(map_addr);
+ DEFINE_DMA_UNMAP_LEN(map_len);
+ unsigned int addr_offset;
+};
+
+struct slic_rx_queue {
+ struct slic_rx_buffer *rxbuffs;
+ unsigned int len;
+ unsigned int done_idx;
+ unsigned int put_idx;
+};
+
+struct slic_device {
+ struct pci_dev *pdev;
+ struct net_device *netdev;
+ void __iomem *regs;
+ /* upper address setting lock */
+ spinlock_t upper_lock;
+ struct slic_shmem shmem;
+ struct napi_struct napi;
+ struct slic_rx_queue rxq;
+ struct slic_tx_queue txq;
+ struct slic_stat_queue stq;
+ struct slic_stats stats;
+ struct slic_upr_list upr_list;
+ /* link configuration lock */
+ spinlock_t link_lock;
+ bool promisc;
+ int speed;
+ unsigned int duplex;
+ bool is_fiber;
+ unsigned char model;
+};
+
+static inline u32 slic_read(struct slic_device *sdev, unsigned int reg)
+{
+ return ioread32(sdev->regs + reg);
+}
+
+static inline void slic_write(struct slic_device *sdev, unsigned int reg,
+ u32 val)
+{
+ iowrite32(val, sdev->regs + reg);
+}
+
+static inline void slic_flush_write(struct slic_device *sdev)
+{
+ (void)ioread32(sdev->regs + SLIC_REG_HOSTID);
+}
+
+#endif /* _SLIC_H */
diff --git a/drivers/net/ethernet/alacritech/slicoss.c b/drivers/net/ethernet/alacritech/slicoss.c
new file mode 100644
index 000000000..a30d0f172
--- /dev/null
+++ b/drivers/net/ethernet/alacritech/slicoss.c
@@ -0,0 +1,1852 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Gigabit Ethernet adapters based on the Session Layer
+ * Interface (SLIC) technology by Alacritech. The driver does not
+ * support the hardware acceleration features provided by these cards.
+ *
+ * Copyright (C) 2016 Lino Sanfilippo <LinoSanfilippo@gmx.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/list.h>
+#include <linux/u64_stats_sync.h>
+
+#include "slic.h"
+
+#define DRV_NAME "slicoss"
+
+static const struct pci_device_id slic_id_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH,
+ PCI_DEVICE_ID_ALACRITECH_MOJAVE) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH,
+ PCI_DEVICE_ID_ALACRITECH_OASIS) },
+ { 0 }
+};
+
+static const char slic_stats_strings[][ETH_GSTRING_LEN] = {
+ "rx_packets",
+ "rx_bytes",
+ "rx_multicasts",
+ "rx_errors",
+ "rx_buff_miss",
+ "rx_tp_csum",
+ "rx_tp_oflow",
+ "rx_tp_hlen",
+ "rx_ip_csum",
+ "rx_ip_len",
+ "rx_ip_hdr_len",
+ "rx_early",
+ "rx_buff_oflow",
+ "rx_lcode",
+ "rx_drbl",
+ "rx_crc",
+ "rx_oflow_802",
+ "rx_uflow_802",
+ "tx_packets",
+ "tx_bytes",
+ "tx_carrier",
+ "tx_dropped",
+ "irq_errs",
+};
+
+static inline int slic_next_queue_idx(unsigned int idx, unsigned int qlen)
+{
+ return (idx + 1) & (qlen - 1);
+}
+
+static inline int slic_get_free_queue_descs(unsigned int put_idx,
+ unsigned int done_idx,
+ unsigned int qlen)
+{
+ if (put_idx >= done_idx)
+ return (qlen - (put_idx - done_idx) - 1);
+ return (done_idx - put_idx - 1);
+}
+
+static unsigned int slic_next_compl_idx(struct slic_device *sdev)
+{
+ struct slic_stat_queue *stq = &sdev->stq;
+ unsigned int active = stq->active_array;
+ struct slic_stat_desc *descs;
+ struct slic_stat_desc *stat;
+ unsigned int idx;
+
+ descs = stq->descs[active];
+ stat = &descs[stq->done_idx];
+
+ if (!stat->status)
+ return SLIC_INVALID_STAT_DESC_IDX;
+
+ idx = (le32_to_cpu(stat->hnd) & 0xffff) - 1;
+ /* reset desc */
+ stat->hnd = 0;
+ stat->status = 0;
+
+ stq->done_idx = slic_next_queue_idx(stq->done_idx, stq->len);
+ /* check for wraparound */
+ if (!stq->done_idx) {
+ dma_addr_t paddr = stq->paddr[active];
+
+ slic_write(sdev, SLIC_REG_RBAR, lower_32_bits(paddr) |
+ stq->len);
+ /* make sure new status descriptors are immediately available */
+ slic_flush_write(sdev);
+ active++;
+ active &= (SLIC_NUM_STAT_DESC_ARRAYS - 1);
+ stq->active_array = active;
+ }
+ return idx;
+}
+
+static unsigned int slic_get_free_tx_descs(struct slic_tx_queue *txq)
+{
+ /* ensure tail idx is updated */
+ smp_mb();
+ return slic_get_free_queue_descs(txq->put_idx, txq->done_idx, txq->len);
+}
+
+static unsigned int slic_get_free_rx_descs(struct slic_rx_queue *rxq)
+{
+ return slic_get_free_queue_descs(rxq->put_idx, rxq->done_idx, rxq->len);
+}
+
+static void slic_clear_upr_list(struct slic_upr_list *upr_list)
+{
+ struct slic_upr *upr;
+ struct slic_upr *tmp;
+
+ spin_lock_bh(&upr_list->lock);
+ list_for_each_entry_safe(upr, tmp, &upr_list->list, list) {
+ list_del(&upr->list);
+ kfree(upr);
+ }
+ upr_list->pending = false;
+ spin_unlock_bh(&upr_list->lock);
+}
+
+static void slic_start_upr(struct slic_device *sdev, struct slic_upr *upr)
+{
+ u32 reg;
+
+ reg = (upr->type == SLIC_UPR_CONFIG) ? SLIC_REG_RCONFIG :
+ SLIC_REG_LSTAT;
+ slic_write(sdev, reg, lower_32_bits(upr->paddr));
+ slic_flush_write(sdev);
+}
+
+static void slic_queue_upr(struct slic_device *sdev, struct slic_upr *upr)
+{
+ struct slic_upr_list *upr_list = &sdev->upr_list;
+ bool pending;
+
+ spin_lock_bh(&upr_list->lock);
+ pending = upr_list->pending;
+ INIT_LIST_HEAD(&upr->list);
+ list_add_tail(&upr->list, &upr_list->list);
+ upr_list->pending = true;
+ spin_unlock_bh(&upr_list->lock);
+
+ if (!pending)
+ slic_start_upr(sdev, upr);
+}
+
+static struct slic_upr *slic_dequeue_upr(struct slic_device *sdev)
+{
+ struct slic_upr_list *upr_list = &sdev->upr_list;
+ struct slic_upr *next_upr = NULL;
+ struct slic_upr *upr = NULL;
+
+ spin_lock_bh(&upr_list->lock);
+ if (!list_empty(&upr_list->list)) {
+ upr = list_first_entry(&upr_list->list, struct slic_upr, list);
+ list_del(&upr->list);
+
+ if (list_empty(&upr_list->list))
+ upr_list->pending = false;
+ else
+ next_upr = list_first_entry(&upr_list->list,
+ struct slic_upr, list);
+ }
+ spin_unlock_bh(&upr_list->lock);
+ /* trigger processing of the next upr in list */
+ if (next_upr)
+ slic_start_upr(sdev, next_upr);
+
+ return upr;
+}
+
+static int slic_new_upr(struct slic_device *sdev, unsigned int type,
+ dma_addr_t paddr)
+{
+ struct slic_upr *upr;
+
+ upr = kmalloc(sizeof(*upr), GFP_ATOMIC);
+ if (!upr)
+ return -ENOMEM;
+ upr->type = type;
+ upr->paddr = paddr;
+
+ slic_queue_upr(sdev, upr);
+
+ return 0;
+}
+
+static void slic_set_mcast_bit(u64 *mcmask, unsigned char const *addr)
+{
+ u64 mask = *mcmask;
+ u8 crc;
+ /* Get the CRC polynomial for the mac address: we use bits 1-8 (lsb),
+ * bitwise reversed, msb (= lsb bit 0 before bitrev) is automatically
+ * discarded.
+ */
+ crc = ether_crc(ETH_ALEN, addr) >> 23;
+ /* we only have space on the SLIC for 64 entries */
+ crc &= 0x3F;
+ mask |= (u64)1 << crc;
+ *mcmask = mask;
+}
+
+/* must be called with link_lock held */
+static void slic_configure_rcv(struct slic_device *sdev)
+{
+ u32 val;
+
+ val = SLIC_GRCR_RESET | SLIC_GRCR_ADDRAEN | SLIC_GRCR_RCVEN |
+ SLIC_GRCR_HASHSIZE << SLIC_GRCR_HASHSIZE_SHIFT | SLIC_GRCR_RCVBAD;
+
+ if (sdev->duplex == DUPLEX_FULL)
+ val |= SLIC_GRCR_CTLEN;
+
+ if (sdev->promisc)
+ val |= SLIC_GRCR_RCVALL;
+
+ slic_write(sdev, SLIC_REG_WRCFG, val);
+}
+
+/* must be called with link_lock held */
+static void slic_configure_xmt(struct slic_device *sdev)
+{
+ u32 val;
+
+ val = SLIC_GXCR_RESET | SLIC_GXCR_XMTEN;
+
+ if (sdev->duplex == DUPLEX_FULL)
+ val |= SLIC_GXCR_PAUSEEN;
+
+ slic_write(sdev, SLIC_REG_WXCFG, val);
+}
+
+/* must be called with link_lock held */
+static void slic_configure_mac(struct slic_device *sdev)
+{
+ u32 val;
+
+ if (sdev->speed == SPEED_1000) {
+ val = SLIC_GMCR_GAPBB_1000 << SLIC_GMCR_GAPBB_SHIFT |
+ SLIC_GMCR_GAPR1_1000 << SLIC_GMCR_GAPR1_SHIFT |
+ SLIC_GMCR_GAPR2_1000 << SLIC_GMCR_GAPR2_SHIFT |
+ SLIC_GMCR_GBIT; /* enable GMII */
+ } else {
+ val = SLIC_GMCR_GAPBB_100 << SLIC_GMCR_GAPBB_SHIFT |
+ SLIC_GMCR_GAPR1_100 << SLIC_GMCR_GAPR1_SHIFT |
+ SLIC_GMCR_GAPR2_100 << SLIC_GMCR_GAPR2_SHIFT;
+ }
+
+ if (sdev->duplex == DUPLEX_FULL)
+ val |= SLIC_GMCR_FULLD;
+
+ slic_write(sdev, SLIC_REG_WMCFG, val);
+}
+
+static void slic_configure_link_locked(struct slic_device *sdev, int speed,
+ unsigned int duplex)
+{
+ struct net_device *dev = sdev->netdev;
+
+ if (sdev->speed == speed && sdev->duplex == duplex)
+ return;
+
+ sdev->speed = speed;
+ sdev->duplex = duplex;
+
+ if (sdev->speed == SPEED_UNKNOWN) {
+ if (netif_carrier_ok(dev))
+ netif_carrier_off(dev);
+ } else {
+ /* (re)configure link settings */
+ slic_configure_mac(sdev);
+ slic_configure_xmt(sdev);
+ slic_configure_rcv(sdev);
+ slic_flush_write(sdev);
+
+ if (!netif_carrier_ok(dev))
+ netif_carrier_on(dev);
+ }
+}
+
+static void slic_configure_link(struct slic_device *sdev, int speed,
+ unsigned int duplex)
+{
+ spin_lock_bh(&sdev->link_lock);
+ slic_configure_link_locked(sdev, speed, duplex);
+ spin_unlock_bh(&sdev->link_lock);
+}
+
+static void slic_set_rx_mode(struct net_device *dev)
+{
+ struct slic_device *sdev = netdev_priv(dev);
+ struct netdev_hw_addr *hwaddr;
+ bool set_promisc;
+ u64 mcmask;
+
+ if (dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) {
+ /* Turn on all multicast addresses. We have to do this for
+ * promiscuous mode as well as ALLMCAST mode (it saves the
+ * microcode from having to keep state about the MAC
+ * configuration).
+ */
+ mcmask = ~(u64)0;
+ } else {
+ mcmask = 0;
+
+ netdev_for_each_mc_addr(hwaddr, dev) {
+ slic_set_mcast_bit(&mcmask, hwaddr->addr);
+ }
+ }
+
+ slic_write(sdev, SLIC_REG_MCASTLOW, lower_32_bits(mcmask));
+ slic_write(sdev, SLIC_REG_MCASTHIGH, upper_32_bits(mcmask));
+
+ set_promisc = !!(dev->flags & IFF_PROMISC);
+
+ spin_lock_bh(&sdev->link_lock);
+ if (sdev->promisc != set_promisc) {
+ sdev->promisc = set_promisc;
+ slic_configure_rcv(sdev);
+ }
+ spin_unlock_bh(&sdev->link_lock);
+}
+
+static void slic_xmit_complete(struct slic_device *sdev)
+{
+ struct slic_tx_queue *txq = &sdev->txq;
+ struct net_device *dev = sdev->netdev;
+ struct slic_tx_buffer *buff;
+ unsigned int frames = 0;
+ unsigned int bytes = 0;
+ unsigned int idx;
+
+ /* Limit processing to SLIC_MAX_TX_COMPLETIONS frames to avoid that new
+ * completions during processing keeps the loop running endlessly.
+ */
+ do {
+ idx = slic_next_compl_idx(sdev);
+ if (idx == SLIC_INVALID_STAT_DESC_IDX)
+ break;
+
+ txq->done_idx = idx;
+ buff = &txq->txbuffs[idx];
+
+ if (unlikely(!buff->skb)) {
+ netdev_warn(dev,
+ "no skb found for desc idx %i\n", idx);
+ continue;
+ }
+ dma_unmap_single(&sdev->pdev->dev,
+ dma_unmap_addr(buff, map_addr),
+ dma_unmap_len(buff, map_len), DMA_TO_DEVICE);
+
+ bytes += buff->skb->len;
+ frames++;
+
+ dev_kfree_skb_any(buff->skb);
+ buff->skb = NULL;
+ } while (frames < SLIC_MAX_TX_COMPLETIONS);
+ /* make sure xmit sees the new value for done_idx */
+ smp_wmb();
+
+ u64_stats_update_begin(&sdev->stats.syncp);
+ sdev->stats.tx_bytes += bytes;
+ sdev->stats.tx_packets += frames;
+ u64_stats_update_end(&sdev->stats.syncp);
+
+ netif_tx_lock(dev);
+ if (netif_queue_stopped(dev) &&
+ (slic_get_free_tx_descs(txq) >= SLIC_MIN_TX_WAKEUP_DESCS))
+ netif_wake_queue(dev);
+ netif_tx_unlock(dev);
+}
+
+static void slic_refill_rx_queue(struct slic_device *sdev, gfp_t gfp)
+{
+ const unsigned int ALIGN_MASK = SLIC_RX_BUFF_ALIGN - 1;
+ unsigned int maplen = SLIC_RX_BUFF_SIZE;
+ struct slic_rx_queue *rxq = &sdev->rxq;
+ struct net_device *dev = sdev->netdev;
+ struct slic_rx_buffer *buff;
+ struct slic_rx_desc *desc;
+ unsigned int misalign;
+ unsigned int offset;
+ struct sk_buff *skb;
+ dma_addr_t paddr;
+
+ while (slic_get_free_rx_descs(rxq) > SLIC_MAX_REQ_RX_DESCS) {
+ skb = alloc_skb(maplen + ALIGN_MASK, gfp);
+ if (!skb)
+ break;
+
+ paddr = dma_map_single(&sdev->pdev->dev, skb->data, maplen,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&sdev->pdev->dev, paddr)) {
+ netdev_err(dev, "mapping rx packet failed\n");
+ /* drop skb */
+ dev_kfree_skb_any(skb);
+ break;
+ }
+ /* ensure head buffer descriptors are 256 byte aligned */
+ offset = 0;
+ misalign = paddr & ALIGN_MASK;
+ if (misalign) {
+ offset = SLIC_RX_BUFF_ALIGN - misalign;
+ skb_reserve(skb, offset);
+ }
+ /* the HW expects dma chunks for descriptor + frame data */
+ desc = (struct slic_rx_desc *)skb->data;
+ /* temporarily sync descriptor for CPU to clear status */
+ dma_sync_single_for_cpu(&sdev->pdev->dev, paddr,
+ offset + sizeof(*desc),
+ DMA_FROM_DEVICE);
+ desc->status = 0;
+ /* return it to HW again */
+ dma_sync_single_for_device(&sdev->pdev->dev, paddr,
+ offset + sizeof(*desc),
+ DMA_FROM_DEVICE);
+
+ buff = &rxq->rxbuffs[rxq->put_idx];
+ buff->skb = skb;
+ dma_unmap_addr_set(buff, map_addr, paddr);
+ dma_unmap_len_set(buff, map_len, maplen);
+ buff->addr_offset = offset;
+ /* complete write to descriptor before it is handed to HW */
+ wmb();
+ /* head buffer descriptors are placed immediately before skb */
+ slic_write(sdev, SLIC_REG_HBAR, lower_32_bits(paddr) + offset);
+ rxq->put_idx = slic_next_queue_idx(rxq->put_idx, rxq->len);
+ }
+}
+
+static void slic_handle_frame_error(struct slic_device *sdev,
+ struct sk_buff *skb)
+{
+ struct slic_stats *stats = &sdev->stats;
+
+ if (sdev->model == SLIC_MODEL_OASIS) {
+ struct slic_rx_info_oasis *info;
+ u32 status_b;
+ u32 status;
+
+ info = (struct slic_rx_info_oasis *)skb->data;
+ status = le32_to_cpu(info->frame_status);
+ status_b = le32_to_cpu(info->frame_status_b);
+ /* transport layer */
+ if (status_b & SLIC_VRHSTATB_TPCSUM)
+ SLIC_INC_STATS_COUNTER(stats, rx_tpcsum);
+ if (status & SLIC_VRHSTAT_TPOFLO)
+ SLIC_INC_STATS_COUNTER(stats, rx_tpoflow);
+ if (status_b & SLIC_VRHSTATB_TPHLEN)
+ SLIC_INC_STATS_COUNTER(stats, rx_tphlen);
+ /* ip layer */
+ if (status_b & SLIC_VRHSTATB_IPCSUM)
+ SLIC_INC_STATS_COUNTER(stats, rx_ipcsum);
+ if (status_b & SLIC_VRHSTATB_IPLERR)
+ SLIC_INC_STATS_COUNTER(stats, rx_iplen);
+ if (status_b & SLIC_VRHSTATB_IPHERR)
+ SLIC_INC_STATS_COUNTER(stats, rx_iphlen);
+ /* link layer */
+ if (status_b & SLIC_VRHSTATB_RCVE)
+ SLIC_INC_STATS_COUNTER(stats, rx_early);
+ if (status_b & SLIC_VRHSTATB_BUFF)
+ SLIC_INC_STATS_COUNTER(stats, rx_buffoflow);
+ if (status_b & SLIC_VRHSTATB_CODE)
+ SLIC_INC_STATS_COUNTER(stats, rx_lcode);
+ if (status_b & SLIC_VRHSTATB_DRBL)
+ SLIC_INC_STATS_COUNTER(stats, rx_drbl);
+ if (status_b & SLIC_VRHSTATB_CRC)
+ SLIC_INC_STATS_COUNTER(stats, rx_crc);
+ if (status & SLIC_VRHSTAT_802OE)
+ SLIC_INC_STATS_COUNTER(stats, rx_oflow802);
+ if (status_b & SLIC_VRHSTATB_802UE)
+ SLIC_INC_STATS_COUNTER(stats, rx_uflow802);
+ if (status_b & SLIC_VRHSTATB_CARRE)
+ SLIC_INC_STATS_COUNTER(stats, tx_carrier);
+ } else { /* mojave */
+ struct slic_rx_info_mojave *info;
+ u32 status;
+
+ info = (struct slic_rx_info_mojave *)skb->data;
+ status = le32_to_cpu(info->frame_status);
+ /* transport layer */
+ if (status & SLIC_VGBSTAT_XPERR) {
+ u32 xerr = status >> SLIC_VGBSTAT_XERRSHFT;
+
+ if (xerr == SLIC_VGBSTAT_XCSERR)
+ SLIC_INC_STATS_COUNTER(stats, rx_tpcsum);
+ if (xerr == SLIC_VGBSTAT_XUFLOW)
+ SLIC_INC_STATS_COUNTER(stats, rx_tpoflow);
+ if (xerr == SLIC_VGBSTAT_XHLEN)
+ SLIC_INC_STATS_COUNTER(stats, rx_tphlen);
+ }
+ /* ip layer */
+ if (status & SLIC_VGBSTAT_NETERR) {
+ u32 nerr = status >> SLIC_VGBSTAT_NERRSHFT &
+ SLIC_VGBSTAT_NERRMSK;
+
+ if (nerr == SLIC_VGBSTAT_NCSERR)
+ SLIC_INC_STATS_COUNTER(stats, rx_ipcsum);
+ if (nerr == SLIC_VGBSTAT_NUFLOW)
+ SLIC_INC_STATS_COUNTER(stats, rx_iplen);
+ if (nerr == SLIC_VGBSTAT_NHLEN)
+ SLIC_INC_STATS_COUNTER(stats, rx_iphlen);
+ }
+ /* link layer */
+ if (status & SLIC_VGBSTAT_LNKERR) {
+ u32 lerr = status & SLIC_VGBSTAT_LERRMSK;
+
+ if (lerr == SLIC_VGBSTAT_LDEARLY)
+ SLIC_INC_STATS_COUNTER(stats, rx_early);
+ if (lerr == SLIC_VGBSTAT_LBOFLO)
+ SLIC_INC_STATS_COUNTER(stats, rx_buffoflow);
+ if (lerr == SLIC_VGBSTAT_LCODERR)
+ SLIC_INC_STATS_COUNTER(stats, rx_lcode);
+ if (lerr == SLIC_VGBSTAT_LDBLNBL)
+ SLIC_INC_STATS_COUNTER(stats, rx_drbl);
+ if (lerr == SLIC_VGBSTAT_LCRCERR)
+ SLIC_INC_STATS_COUNTER(stats, rx_crc);
+ if (lerr == SLIC_VGBSTAT_LOFLO)
+ SLIC_INC_STATS_COUNTER(stats, rx_oflow802);
+ if (lerr == SLIC_VGBSTAT_LUFLO)
+ SLIC_INC_STATS_COUNTER(stats, rx_uflow802);
+ }
+ }
+ SLIC_INC_STATS_COUNTER(stats, rx_errors);
+}
+
+static void slic_handle_receive(struct slic_device *sdev, unsigned int todo,
+ unsigned int *done)
+{
+ struct slic_rx_queue *rxq = &sdev->rxq;
+ struct net_device *dev = sdev->netdev;
+ struct slic_rx_buffer *buff;
+ struct slic_rx_desc *desc;
+ unsigned int frames = 0;
+ unsigned int bytes = 0;
+ struct sk_buff *skb;
+ u32 status;
+ u32 len;
+
+ while (todo && (rxq->done_idx != rxq->put_idx)) {
+ buff = &rxq->rxbuffs[rxq->done_idx];
+
+ skb = buff->skb;
+ if (!skb)
+ break;
+
+ desc = (struct slic_rx_desc *)skb->data;
+
+ dma_sync_single_for_cpu(&sdev->pdev->dev,
+ dma_unmap_addr(buff, map_addr),
+ buff->addr_offset + sizeof(*desc),
+ DMA_FROM_DEVICE);
+
+ status = le32_to_cpu(desc->status);
+ if (!(status & SLIC_IRHDDR_SVALID)) {
+ dma_sync_single_for_device(&sdev->pdev->dev,
+ dma_unmap_addr(buff,
+ map_addr),
+ buff->addr_offset +
+ sizeof(*desc),
+ DMA_FROM_DEVICE);
+ break;
+ }
+
+ buff->skb = NULL;
+
+ dma_unmap_single(&sdev->pdev->dev,
+ dma_unmap_addr(buff, map_addr),
+ dma_unmap_len(buff, map_len),
+ DMA_FROM_DEVICE);
+
+ /* skip rx descriptor that is placed before the frame data */
+ skb_reserve(skb, SLIC_RX_BUFF_HDR_SIZE);
+
+ if (unlikely(status & SLIC_IRHDDR_ERR)) {
+ slic_handle_frame_error(sdev, skb);
+ dev_kfree_skb_any(skb);
+ } else {
+ struct ethhdr *eh = (struct ethhdr *)skb->data;
+
+ if (is_multicast_ether_addr(eh->h_dest))
+ SLIC_INC_STATS_COUNTER(&sdev->stats, rx_mcasts);
+
+ len = le32_to_cpu(desc->length) & SLIC_IRHDDR_FLEN_MSK;
+ skb_put(skb, len);
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ napi_gro_receive(&sdev->napi, skb);
+
+ bytes += len;
+ frames++;
+ }
+ rxq->done_idx = slic_next_queue_idx(rxq->done_idx, rxq->len);
+ todo--;
+ }
+
+ u64_stats_update_begin(&sdev->stats.syncp);
+ sdev->stats.rx_bytes += bytes;
+ sdev->stats.rx_packets += frames;
+ u64_stats_update_end(&sdev->stats.syncp);
+
+ slic_refill_rx_queue(sdev, GFP_ATOMIC);
+}
+
+static void slic_handle_link_irq(struct slic_device *sdev)
+{
+ struct slic_shmem *sm = &sdev->shmem;
+ struct slic_shmem_data *sm_data = sm->shmem_data;
+ unsigned int duplex;
+ int speed;
+ u32 link;
+
+ link = le32_to_cpu(sm_data->link);
+
+ if (link & SLIC_GIG_LINKUP) {
+ if (link & SLIC_GIG_SPEED_1000)
+ speed = SPEED_1000;
+ else if (link & SLIC_GIG_SPEED_100)
+ speed = SPEED_100;
+ else
+ speed = SPEED_10;
+
+ duplex = (link & SLIC_GIG_FULLDUPLEX) ? DUPLEX_FULL :
+ DUPLEX_HALF;
+ } else {
+ duplex = DUPLEX_UNKNOWN;
+ speed = SPEED_UNKNOWN;
+ }
+ slic_configure_link(sdev, speed, duplex);
+}
+
+static void slic_handle_upr_irq(struct slic_device *sdev, u32 irqs)
+{
+ struct slic_upr *upr;
+
+ /* remove upr that caused this irq (always the first entry in list) */
+ upr = slic_dequeue_upr(sdev);
+ if (!upr) {
+ netdev_warn(sdev->netdev, "no upr found on list\n");
+ return;
+ }
+
+ if (upr->type == SLIC_UPR_LSTAT) {
+ if (unlikely(irqs & SLIC_ISR_UPCERR_MASK)) {
+ /* try again */
+ slic_queue_upr(sdev, upr);
+ return;
+ }
+ slic_handle_link_irq(sdev);
+ }
+ kfree(upr);
+}
+
+static int slic_handle_link_change(struct slic_device *sdev)
+{
+ return slic_new_upr(sdev, SLIC_UPR_LSTAT, sdev->shmem.link_paddr);
+}
+
+static void slic_handle_err_irq(struct slic_device *sdev, u32 isr)
+{
+ struct slic_stats *stats = &sdev->stats;
+
+ if (isr & SLIC_ISR_RMISS)
+ SLIC_INC_STATS_COUNTER(stats, rx_buff_miss);
+ if (isr & SLIC_ISR_XDROP)
+ SLIC_INC_STATS_COUNTER(stats, tx_dropped);
+ if (!(isr & (SLIC_ISR_RMISS | SLIC_ISR_XDROP)))
+ SLIC_INC_STATS_COUNTER(stats, irq_errs);
+}
+
+static void slic_handle_irq(struct slic_device *sdev, u32 isr,
+ unsigned int todo, unsigned int *done)
+{
+ if (isr & SLIC_ISR_ERR)
+ slic_handle_err_irq(sdev, isr);
+
+ if (isr & SLIC_ISR_LEVENT)
+ slic_handle_link_change(sdev);
+
+ if (isr & SLIC_ISR_UPC_MASK)
+ slic_handle_upr_irq(sdev, isr);
+
+ if (isr & SLIC_ISR_RCV)
+ slic_handle_receive(sdev, todo, done);
+
+ if (isr & SLIC_ISR_CMD)
+ slic_xmit_complete(sdev);
+}
+
+static int slic_poll(struct napi_struct *napi, int todo)
+{
+ struct slic_device *sdev = container_of(napi, struct slic_device, napi);
+ struct slic_shmem *sm = &sdev->shmem;
+ struct slic_shmem_data *sm_data = sm->shmem_data;
+ u32 isr = le32_to_cpu(sm_data->isr);
+ int done = 0;
+
+ slic_handle_irq(sdev, isr, todo, &done);
+
+ if (done < todo) {
+ napi_complete_done(napi, done);
+ /* reenable irqs */
+ sm_data->isr = 0;
+ /* make sure sm_data->isr is cleard before irqs are reenabled */
+ wmb();
+ slic_write(sdev, SLIC_REG_ISR, 0);
+ slic_flush_write(sdev);
+ }
+
+ return done;
+}
+
+static irqreturn_t slic_irq(int irq, void *dev_id)
+{
+ struct slic_device *sdev = dev_id;
+ struct slic_shmem *sm = &sdev->shmem;
+ struct slic_shmem_data *sm_data = sm->shmem_data;
+
+ slic_write(sdev, SLIC_REG_ICR, SLIC_ICR_INT_MASK);
+ slic_flush_write(sdev);
+ /* make sure sm_data->isr is read after ICR_INT_MASK is set */
+ wmb();
+
+ if (!sm_data->isr) {
+ dma_rmb();
+ /* spurious interrupt */
+ slic_write(sdev, SLIC_REG_ISR, 0);
+ slic_flush_write(sdev);
+ return IRQ_NONE;
+ }
+
+ napi_schedule_irqoff(&sdev->napi);
+
+ return IRQ_HANDLED;
+}
+
+static void slic_card_reset(struct slic_device *sdev)
+{
+ u16 cmd;
+
+ slic_write(sdev, SLIC_REG_RESET, SLIC_RESET_MAGIC);
+ /* flush write by means of config space */
+ pci_read_config_word(sdev->pdev, PCI_COMMAND, &cmd);
+ mdelay(1);
+}
+
+static int slic_init_stat_queue(struct slic_device *sdev)
+{
+ const unsigned int DESC_ALIGN_MASK = SLIC_STATS_DESC_ALIGN - 1;
+ struct slic_stat_queue *stq = &sdev->stq;
+ struct slic_stat_desc *descs;
+ unsigned int misalign;
+ unsigned int offset;
+ dma_addr_t paddr;
+ size_t size;
+ int err;
+ int i;
+
+ stq->len = SLIC_NUM_STAT_DESCS;
+ stq->active_array = 0;
+ stq->done_idx = 0;
+
+ size = stq->len * sizeof(*descs) + DESC_ALIGN_MASK;
+
+ for (i = 0; i < SLIC_NUM_STAT_DESC_ARRAYS; i++) {
+ descs = dma_alloc_coherent(&sdev->pdev->dev, size, &paddr,
+ GFP_KERNEL);
+ if (!descs) {
+ netdev_err(sdev->netdev,
+ "failed to allocate status descriptors\n");
+ err = -ENOMEM;
+ goto free_descs;
+ }
+ /* ensure correct alignment */
+ offset = 0;
+ misalign = paddr & DESC_ALIGN_MASK;
+ if (misalign) {
+ offset = SLIC_STATS_DESC_ALIGN - misalign;
+ descs += offset;
+ paddr += offset;
+ }
+
+ slic_write(sdev, SLIC_REG_RBAR, lower_32_bits(paddr) |
+ stq->len);
+ stq->descs[i] = descs;
+ stq->paddr[i] = paddr;
+ stq->addr_offset[i] = offset;
+ }
+
+ stq->mem_size = size;
+
+ return 0;
+
+free_descs:
+ while (i--) {
+ dma_free_coherent(&sdev->pdev->dev, stq->mem_size,
+ stq->descs[i] - stq->addr_offset[i],
+ stq->paddr[i] - stq->addr_offset[i]);
+ }
+
+ return err;
+}
+
+static void slic_free_stat_queue(struct slic_device *sdev)
+{
+ struct slic_stat_queue *stq = &sdev->stq;
+ int i;
+
+ for (i = 0; i < SLIC_NUM_STAT_DESC_ARRAYS; i++) {
+ dma_free_coherent(&sdev->pdev->dev, stq->mem_size,
+ stq->descs[i] - stq->addr_offset[i],
+ stq->paddr[i] - stq->addr_offset[i]);
+ }
+}
+
+static int slic_init_tx_queue(struct slic_device *sdev)
+{
+ struct slic_tx_queue *txq = &sdev->txq;
+ struct slic_tx_buffer *buff;
+ struct slic_tx_desc *desc;
+ unsigned int i;
+ int err;
+
+ txq->len = SLIC_NUM_TX_DESCS;
+ txq->put_idx = 0;
+ txq->done_idx = 0;
+
+ txq->txbuffs = kcalloc(txq->len, sizeof(*buff), GFP_KERNEL);
+ if (!txq->txbuffs)
+ return -ENOMEM;
+
+ txq->dma_pool = dma_pool_create("slic_pool", &sdev->pdev->dev,
+ sizeof(*desc), SLIC_TX_DESC_ALIGN,
+ 4096);
+ if (!txq->dma_pool) {
+ err = -ENOMEM;
+ netdev_err(sdev->netdev, "failed to create dma pool\n");
+ goto free_buffs;
+ }
+
+ for (i = 0; i < txq->len; i++) {
+ buff = &txq->txbuffs[i];
+ desc = dma_pool_zalloc(txq->dma_pool, GFP_KERNEL,
+ &buff->desc_paddr);
+ if (!desc) {
+ netdev_err(sdev->netdev,
+ "failed to alloc pool chunk (%i)\n", i);
+ err = -ENOMEM;
+ goto free_descs;
+ }
+
+ desc->hnd = cpu_to_le32((u32)(i + 1));
+ desc->cmd = SLIC_CMD_XMT_REQ;
+ desc->flags = 0;
+ desc->type = cpu_to_le32(SLIC_CMD_TYPE_DUMB);
+ buff->desc = desc;
+ }
+
+ return 0;
+
+free_descs:
+ while (i--) {
+ buff = &txq->txbuffs[i];
+ dma_pool_free(txq->dma_pool, buff->desc, buff->desc_paddr);
+ }
+ dma_pool_destroy(txq->dma_pool);
+
+free_buffs:
+ kfree(txq->txbuffs);
+
+ return err;
+}
+
+static void slic_free_tx_queue(struct slic_device *sdev)
+{
+ struct slic_tx_queue *txq = &sdev->txq;
+ struct slic_tx_buffer *buff;
+ unsigned int i;
+
+ for (i = 0; i < txq->len; i++) {
+ buff = &txq->txbuffs[i];
+ dma_pool_free(txq->dma_pool, buff->desc, buff->desc_paddr);
+ if (!buff->skb)
+ continue;
+
+ dma_unmap_single(&sdev->pdev->dev,
+ dma_unmap_addr(buff, map_addr),
+ dma_unmap_len(buff, map_len), DMA_TO_DEVICE);
+ consume_skb(buff->skb);
+ }
+ dma_pool_destroy(txq->dma_pool);
+
+ kfree(txq->txbuffs);
+}
+
+static int slic_init_rx_queue(struct slic_device *sdev)
+{
+ struct slic_rx_queue *rxq = &sdev->rxq;
+ struct slic_rx_buffer *buff;
+
+ rxq->len = SLIC_NUM_RX_LES;
+ rxq->done_idx = 0;
+ rxq->put_idx = 0;
+
+ buff = kcalloc(rxq->len, sizeof(*buff), GFP_KERNEL);
+ if (!buff)
+ return -ENOMEM;
+
+ rxq->rxbuffs = buff;
+ slic_refill_rx_queue(sdev, GFP_KERNEL);
+
+ return 0;
+}
+
+static void slic_free_rx_queue(struct slic_device *sdev)
+{
+ struct slic_rx_queue *rxq = &sdev->rxq;
+ struct slic_rx_buffer *buff;
+ unsigned int i;
+
+ /* free rx buffers */
+ for (i = 0; i < rxq->len; i++) {
+ buff = &rxq->rxbuffs[i];
+
+ if (!buff->skb)
+ continue;
+
+ dma_unmap_single(&sdev->pdev->dev,
+ dma_unmap_addr(buff, map_addr),
+ dma_unmap_len(buff, map_len),
+ DMA_FROM_DEVICE);
+ consume_skb(buff->skb);
+ }
+ kfree(rxq->rxbuffs);
+}
+
+static void slic_set_link_autoneg(struct slic_device *sdev)
+{
+ unsigned int subid = sdev->pdev->subsystem_device;
+ u32 val;
+
+ if (sdev->is_fiber) {
+ /* We've got a fiber gigabit interface, and register 4 is
+ * different in fiber mode than in copper mode.
+ */
+ /* advertise FD only @1000 Mb */
+ val = MII_ADVERTISE << 16 | ADVERTISE_1000XFULL |
+ ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM;
+ /* enable PAUSE frames */
+ slic_write(sdev, SLIC_REG_WPHY, val);
+ /* reset phy, enable auto-neg */
+ val = MII_BMCR << 16 | BMCR_RESET | BMCR_ANENABLE |
+ BMCR_ANRESTART;
+ slic_write(sdev, SLIC_REG_WPHY, val);
+ } else { /* copper gigabit */
+ /* We've got a copper gigabit interface, and register 4 is
+ * different in copper mode than in fiber mode.
+ */
+ /* advertise 10/100 Mb modes */
+ val = MII_ADVERTISE << 16 | ADVERTISE_100FULL |
+ ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF;
+ /* enable PAUSE frames */
+ val |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ /* required by the Cicada PHY */
+ val |= ADVERTISE_CSMA;
+ slic_write(sdev, SLIC_REG_WPHY, val);
+
+ /* advertise FD only @1000 Mb */
+ val = MII_CTRL1000 << 16 | ADVERTISE_1000FULL;
+ slic_write(sdev, SLIC_REG_WPHY, val);
+
+ if (subid != PCI_SUBDEVICE_ID_ALACRITECH_CICADA) {
+ /* if a Marvell PHY enable auto crossover */
+ val = SLIC_MIICR_REG_16 | SLIC_MRV_REG16_XOVERON;
+ slic_write(sdev, SLIC_REG_WPHY, val);
+
+ /* reset phy, enable auto-neg */
+ val = MII_BMCR << 16 | BMCR_RESET | BMCR_ANENABLE |
+ BMCR_ANRESTART;
+ slic_write(sdev, SLIC_REG_WPHY, val);
+ } else {
+ /* enable and restart auto-neg (don't reset) */
+ val = MII_BMCR << 16 | BMCR_ANENABLE | BMCR_ANRESTART;
+ slic_write(sdev, SLIC_REG_WPHY, val);
+ }
+ }
+}
+
+static void slic_set_mac_address(struct slic_device *sdev)
+{
+ const u8 *addr = sdev->netdev->dev_addr;
+ u32 val;
+
+ val = addr[5] | addr[4] << 8 | addr[3] << 16 | addr[2] << 24;
+
+ slic_write(sdev, SLIC_REG_WRADDRAL, val);
+ slic_write(sdev, SLIC_REG_WRADDRBL, val);
+
+ val = addr[0] << 8 | addr[1];
+
+ slic_write(sdev, SLIC_REG_WRADDRAH, val);
+ slic_write(sdev, SLIC_REG_WRADDRBH, val);
+ slic_flush_write(sdev);
+}
+
+static u32 slic_read_dword_from_firmware(const struct firmware *fw, int *offset)
+{
+ int idx = *offset;
+ __le32 val;
+
+ memcpy(&val, fw->data + *offset, sizeof(val));
+ idx += 4;
+ *offset = idx;
+
+ return le32_to_cpu(val);
+}
+
+MODULE_FIRMWARE(SLIC_RCV_FIRMWARE_MOJAVE);
+MODULE_FIRMWARE(SLIC_RCV_FIRMWARE_OASIS);
+
+static int slic_load_rcvseq_firmware(struct slic_device *sdev)
+{
+ const struct firmware *fw;
+ const char *file;
+ u32 codelen;
+ int idx = 0;
+ u32 instr;
+ u32 addr;
+ int err;
+
+ file = (sdev->model == SLIC_MODEL_OASIS) ? SLIC_RCV_FIRMWARE_OASIS :
+ SLIC_RCV_FIRMWARE_MOJAVE;
+ err = request_firmware(&fw, file, &sdev->pdev->dev);
+ if (err) {
+ dev_err(&sdev->pdev->dev,
+ "failed to load receive sequencer firmware %s\n", file);
+ return err;
+ }
+ /* Do an initial sanity check concerning firmware size now. A further
+ * check follows below.
+ */
+ if (fw->size < SLIC_FIRMWARE_MIN_SIZE) {
+ dev_err(&sdev->pdev->dev,
+ "invalid firmware size %zu (min %u expected)\n",
+ fw->size, SLIC_FIRMWARE_MIN_SIZE);
+ err = -EINVAL;
+ goto release;
+ }
+
+ codelen = slic_read_dword_from_firmware(fw, &idx);
+
+ /* do another sanity check against firmware size */
+ if ((codelen + 4) > fw->size) {
+ dev_err(&sdev->pdev->dev,
+ "invalid rcv-sequencer firmware size %zu\n", fw->size);
+ err = -EINVAL;
+ goto release;
+ }
+
+ /* download sequencer code to card */
+ slic_write(sdev, SLIC_REG_RCV_WCS, SLIC_RCVWCS_BEGIN);
+ for (addr = 0; addr < codelen; addr++) {
+ __le32 val;
+ /* write out instruction address */
+ slic_write(sdev, SLIC_REG_RCV_WCS, addr);
+
+ instr = slic_read_dword_from_firmware(fw, &idx);
+ /* write out the instruction data low addr */
+ slic_write(sdev, SLIC_REG_RCV_WCS, instr);
+
+ val = (__le32)fw->data[idx];
+ instr = le32_to_cpu(val);
+ idx++;
+ /* write out the instruction data high addr */
+ slic_write(sdev, SLIC_REG_RCV_WCS, instr);
+ }
+ /* finish download */
+ slic_write(sdev, SLIC_REG_RCV_WCS, SLIC_RCVWCS_FINISH);
+ slic_flush_write(sdev);
+release:
+ release_firmware(fw);
+
+ return err;
+}
+
+MODULE_FIRMWARE(SLIC_FIRMWARE_MOJAVE);
+MODULE_FIRMWARE(SLIC_FIRMWARE_OASIS);
+
+static int slic_load_firmware(struct slic_device *sdev)
+{
+ u32 sectstart[SLIC_FIRMWARE_MAX_SECTIONS];
+ u32 sectsize[SLIC_FIRMWARE_MAX_SECTIONS];
+ const struct firmware *fw;
+ unsigned int datalen;
+ const char *file;
+ int code_start;
+ unsigned int i;
+ u32 numsects;
+ int idx = 0;
+ u32 sect;
+ u32 instr;
+ u32 addr;
+ u32 base;
+ int err;
+
+ file = (sdev->model == SLIC_MODEL_OASIS) ? SLIC_FIRMWARE_OASIS :
+ SLIC_FIRMWARE_MOJAVE;
+ err = request_firmware(&fw, file, &sdev->pdev->dev);
+ if (err) {
+ dev_err(&sdev->pdev->dev, "failed to load firmware %s\n", file);
+ return err;
+ }
+ /* Do an initial sanity check concerning firmware size now. A further
+ * check follows below.
+ */
+ if (fw->size < SLIC_FIRMWARE_MIN_SIZE) {
+ dev_err(&sdev->pdev->dev,
+ "invalid firmware size %zu (min is %u)\n", fw->size,
+ SLIC_FIRMWARE_MIN_SIZE);
+ err = -EINVAL;
+ goto release;
+ }
+
+ numsects = slic_read_dword_from_firmware(fw, &idx);
+ if (numsects == 0 || numsects > SLIC_FIRMWARE_MAX_SECTIONS) {
+ dev_err(&sdev->pdev->dev,
+ "invalid number of sections in firmware: %u", numsects);
+ err = -EINVAL;
+ goto release;
+ }
+
+ datalen = numsects * 8 + 4;
+ for (i = 0; i < numsects; i++) {
+ sectsize[i] = slic_read_dword_from_firmware(fw, &idx);
+ datalen += sectsize[i];
+ }
+
+ /* do another sanity check against firmware size */
+ if (datalen > fw->size) {
+ dev_err(&sdev->pdev->dev,
+ "invalid firmware size %zu (expected >= %u)\n",
+ fw->size, datalen);
+ err = -EINVAL;
+ goto release;
+ }
+ /* get sections */
+ for (i = 0; i < numsects; i++)
+ sectstart[i] = slic_read_dword_from_firmware(fw, &idx);
+
+ code_start = idx;
+ instr = slic_read_dword_from_firmware(fw, &idx);
+
+ for (sect = 0; sect < numsects; sect++) {
+ unsigned int ssize = sectsize[sect] >> 3;
+
+ base = sectstart[sect];
+
+ for (addr = 0; addr < ssize; addr++) {
+ /* write out instruction address */
+ slic_write(sdev, SLIC_REG_WCS, base + addr);
+ /* write out instruction to low addr */
+ slic_write(sdev, SLIC_REG_WCS, instr);
+ instr = slic_read_dword_from_firmware(fw, &idx);
+ /* write out instruction to high addr */
+ slic_write(sdev, SLIC_REG_WCS, instr);
+ instr = slic_read_dword_from_firmware(fw, &idx);
+ }
+ }
+
+ idx = code_start;
+
+ for (sect = 0; sect < numsects; sect++) {
+ unsigned int ssize = sectsize[sect] >> 3;
+
+ instr = slic_read_dword_from_firmware(fw, &idx);
+ base = sectstart[sect];
+ if (base < 0x8000)
+ continue;
+
+ for (addr = 0; addr < ssize; addr++) {
+ /* write out instruction address */
+ slic_write(sdev, SLIC_REG_WCS,
+ SLIC_WCS_COMPARE | (base + addr));
+ /* write out instruction to low addr */
+ slic_write(sdev, SLIC_REG_WCS, instr);
+ instr = slic_read_dword_from_firmware(fw, &idx);
+ /* write out instruction to high addr */
+ slic_write(sdev, SLIC_REG_WCS, instr);
+ instr = slic_read_dword_from_firmware(fw, &idx);
+ }
+ }
+ slic_flush_write(sdev);
+ mdelay(10);
+ /* everything OK, kick off the card */
+ slic_write(sdev, SLIC_REG_WCS, SLIC_WCS_START);
+ slic_flush_write(sdev);
+ /* wait long enough for ucode to init card and reach the mainloop */
+ mdelay(20);
+release:
+ release_firmware(fw);
+
+ return err;
+}
+
+static int slic_init_shmem(struct slic_device *sdev)
+{
+ struct slic_shmem *sm = &sdev->shmem;
+ struct slic_shmem_data *sm_data;
+ dma_addr_t paddr;
+
+ sm_data = dma_alloc_coherent(&sdev->pdev->dev, sizeof(*sm_data),
+ &paddr, GFP_KERNEL);
+ if (!sm_data) {
+ dev_err(&sdev->pdev->dev, "failed to allocate shared memory\n");
+ return -ENOMEM;
+ }
+
+ sm->shmem_data = sm_data;
+ sm->isr_paddr = paddr;
+ sm->link_paddr = paddr + offsetof(struct slic_shmem_data, link);
+
+ return 0;
+}
+
+static void slic_free_shmem(struct slic_device *sdev)
+{
+ struct slic_shmem *sm = &sdev->shmem;
+ struct slic_shmem_data *sm_data = sm->shmem_data;
+
+ dma_free_coherent(&sdev->pdev->dev, sizeof(*sm_data), sm_data,
+ sm->isr_paddr);
+}
+
+static int slic_init_iface(struct slic_device *sdev)
+{
+ struct slic_shmem *sm = &sdev->shmem;
+ int err;
+
+ sdev->upr_list.pending = false;
+
+ err = slic_init_shmem(sdev);
+ if (err) {
+ netdev_err(sdev->netdev, "failed to init shared memory\n");
+ return err;
+ }
+
+ err = slic_load_firmware(sdev);
+ if (err) {
+ netdev_err(sdev->netdev, "failed to load firmware\n");
+ goto free_sm;
+ }
+
+ err = slic_load_rcvseq_firmware(sdev);
+ if (err) {
+ netdev_err(sdev->netdev,
+ "failed to load firmware for receive sequencer\n");
+ goto free_sm;
+ }
+
+ slic_write(sdev, SLIC_REG_ICR, SLIC_ICR_INT_OFF);
+ slic_flush_write(sdev);
+ mdelay(1);
+
+ err = slic_init_rx_queue(sdev);
+ if (err) {
+ netdev_err(sdev->netdev, "failed to init rx queue: %u\n", err);
+ goto free_sm;
+ }
+
+ err = slic_init_tx_queue(sdev);
+ if (err) {
+ netdev_err(sdev->netdev, "failed to init tx queue: %u\n", err);
+ goto free_rxq;
+ }
+
+ err = slic_init_stat_queue(sdev);
+ if (err) {
+ netdev_err(sdev->netdev, "failed to init status queue: %u\n",
+ err);
+ goto free_txq;
+ }
+
+ slic_write(sdev, SLIC_REG_ISP, lower_32_bits(sm->isr_paddr));
+ napi_enable(&sdev->napi);
+ /* disable irq mitigation */
+ slic_write(sdev, SLIC_REG_INTAGG, 0);
+ slic_write(sdev, SLIC_REG_ISR, 0);
+ slic_flush_write(sdev);
+
+ slic_set_mac_address(sdev);
+
+ spin_lock_bh(&sdev->link_lock);
+ sdev->duplex = DUPLEX_UNKNOWN;
+ sdev->speed = SPEED_UNKNOWN;
+ spin_unlock_bh(&sdev->link_lock);
+
+ slic_set_link_autoneg(sdev);
+
+ err = request_irq(sdev->pdev->irq, slic_irq, IRQF_SHARED, DRV_NAME,
+ sdev);
+ if (err) {
+ netdev_err(sdev->netdev, "failed to request irq: %u\n", err);
+ goto disable_napi;
+ }
+
+ slic_write(sdev, SLIC_REG_ICR, SLIC_ICR_INT_ON);
+ slic_flush_write(sdev);
+ /* request initial link status */
+ err = slic_handle_link_change(sdev);
+ if (err)
+ netdev_warn(sdev->netdev,
+ "failed to set initial link state: %u\n", err);
+ return 0;
+
+disable_napi:
+ napi_disable(&sdev->napi);
+ slic_free_stat_queue(sdev);
+free_txq:
+ slic_free_tx_queue(sdev);
+free_rxq:
+ slic_free_rx_queue(sdev);
+free_sm:
+ slic_free_shmem(sdev);
+ slic_card_reset(sdev);
+
+ return err;
+}
+
+static int slic_open(struct net_device *dev)
+{
+ struct slic_device *sdev = netdev_priv(dev);
+ int err;
+
+ netif_carrier_off(dev);
+
+ err = slic_init_iface(sdev);
+ if (err) {
+ netdev_err(dev, "failed to initialize interface: %i\n", err);
+ return err;
+ }
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int slic_close(struct net_device *dev)
+{
+ struct slic_device *sdev = netdev_priv(dev);
+ u32 val;
+
+ netif_stop_queue(dev);
+
+ /* stop irq handling */
+ napi_disable(&sdev->napi);
+ slic_write(sdev, SLIC_REG_ICR, SLIC_ICR_INT_OFF);
+ slic_write(sdev, SLIC_REG_ISR, 0);
+ slic_flush_write(sdev);
+
+ free_irq(sdev->pdev->irq, sdev);
+ /* turn off RCV and XMT and power down PHY */
+ val = SLIC_GXCR_RESET | SLIC_GXCR_PAUSEEN;
+ slic_write(sdev, SLIC_REG_WXCFG, val);
+
+ val = SLIC_GRCR_RESET | SLIC_GRCR_CTLEN | SLIC_GRCR_ADDRAEN |
+ SLIC_GRCR_HASHSIZE << SLIC_GRCR_HASHSIZE_SHIFT;
+ slic_write(sdev, SLIC_REG_WRCFG, val);
+
+ val = MII_BMCR << 16 | BMCR_PDOWN;
+ slic_write(sdev, SLIC_REG_WPHY, val);
+ slic_flush_write(sdev);
+
+ slic_clear_upr_list(&sdev->upr_list);
+ slic_write(sdev, SLIC_REG_QUIESCE, 0);
+
+ slic_free_stat_queue(sdev);
+ slic_free_tx_queue(sdev);
+ slic_free_rx_queue(sdev);
+ slic_free_shmem(sdev);
+
+ slic_card_reset(sdev);
+ netif_carrier_off(dev);
+
+ return 0;
+}
+
+static netdev_tx_t slic_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct slic_device *sdev = netdev_priv(dev);
+ struct slic_tx_queue *txq = &sdev->txq;
+ struct slic_tx_buffer *buff;
+ struct slic_tx_desc *desc;
+ dma_addr_t paddr;
+ u32 cbar_val;
+ u32 maplen;
+
+ if (unlikely(slic_get_free_tx_descs(txq) < SLIC_MAX_REQ_TX_DESCS)) {
+ netdev_err(dev, "BUG! not enough tx LEs left: %u\n",
+ slic_get_free_tx_descs(txq));
+ return NETDEV_TX_BUSY;
+ }
+
+ maplen = skb_headlen(skb);
+ paddr = dma_map_single(&sdev->pdev->dev, skb->data, maplen,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&sdev->pdev->dev, paddr)) {
+ netdev_err(dev, "failed to map tx buffer\n");
+ goto drop_skb;
+ }
+
+ buff = &txq->txbuffs[txq->put_idx];
+ buff->skb = skb;
+ dma_unmap_addr_set(buff, map_addr, paddr);
+ dma_unmap_len_set(buff, map_len, maplen);
+
+ desc = buff->desc;
+ desc->totlen = cpu_to_le32(maplen);
+ desc->paddrl = cpu_to_le32(lower_32_bits(paddr));
+ desc->paddrh = cpu_to_le32(upper_32_bits(paddr));
+ desc->len = cpu_to_le32(maplen);
+
+ txq->put_idx = slic_next_queue_idx(txq->put_idx, txq->len);
+
+ cbar_val = lower_32_bits(buff->desc_paddr) | 1;
+ /* complete writes to RAM and DMA before hardware is informed */
+ wmb();
+
+ slic_write(sdev, SLIC_REG_CBAR, cbar_val);
+
+ if (slic_get_free_tx_descs(txq) < SLIC_MAX_REQ_TX_DESCS)
+ netif_stop_queue(dev);
+
+ return NETDEV_TX_OK;
+drop_skb:
+ dev_kfree_skb_any(skb);
+
+ return NETDEV_TX_OK;
+}
+
+static void slic_get_stats(struct net_device *dev,
+ struct rtnl_link_stats64 *lst)
+{
+ struct slic_device *sdev = netdev_priv(dev);
+ struct slic_stats *stats = &sdev->stats;
+
+ SLIC_GET_STATS_COUNTER(lst->rx_packets, stats, rx_packets);
+ SLIC_GET_STATS_COUNTER(lst->tx_packets, stats, tx_packets);
+ SLIC_GET_STATS_COUNTER(lst->rx_bytes, stats, rx_bytes);
+ SLIC_GET_STATS_COUNTER(lst->tx_bytes, stats, tx_bytes);
+ SLIC_GET_STATS_COUNTER(lst->rx_errors, stats, rx_errors);
+ SLIC_GET_STATS_COUNTER(lst->rx_dropped, stats, rx_buff_miss);
+ SLIC_GET_STATS_COUNTER(lst->tx_dropped, stats, tx_dropped);
+ SLIC_GET_STATS_COUNTER(lst->multicast, stats, rx_mcasts);
+ SLIC_GET_STATS_COUNTER(lst->rx_over_errors, stats, rx_buffoflow);
+ SLIC_GET_STATS_COUNTER(lst->rx_crc_errors, stats, rx_crc);
+ SLIC_GET_STATS_COUNTER(lst->rx_fifo_errors, stats, rx_oflow802);
+ SLIC_GET_STATS_COUNTER(lst->tx_carrier_errors, stats, tx_carrier);
+}
+
+static int slic_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(slic_stats_strings);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void slic_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *eth_stats, u64 *data)
+{
+ struct slic_device *sdev = netdev_priv(dev);
+ struct slic_stats *stats = &sdev->stats;
+
+ SLIC_GET_STATS_COUNTER(data[0], stats, rx_packets);
+ SLIC_GET_STATS_COUNTER(data[1], stats, rx_bytes);
+ SLIC_GET_STATS_COUNTER(data[2], stats, rx_mcasts);
+ SLIC_GET_STATS_COUNTER(data[3], stats, rx_errors);
+ SLIC_GET_STATS_COUNTER(data[4], stats, rx_buff_miss);
+ SLIC_GET_STATS_COUNTER(data[5], stats, rx_tpcsum);
+ SLIC_GET_STATS_COUNTER(data[6], stats, rx_tpoflow);
+ SLIC_GET_STATS_COUNTER(data[7], stats, rx_tphlen);
+ SLIC_GET_STATS_COUNTER(data[8], stats, rx_ipcsum);
+ SLIC_GET_STATS_COUNTER(data[9], stats, rx_iplen);
+ SLIC_GET_STATS_COUNTER(data[10], stats, rx_iphlen);
+ SLIC_GET_STATS_COUNTER(data[11], stats, rx_early);
+ SLIC_GET_STATS_COUNTER(data[12], stats, rx_buffoflow);
+ SLIC_GET_STATS_COUNTER(data[13], stats, rx_lcode);
+ SLIC_GET_STATS_COUNTER(data[14], stats, rx_drbl);
+ SLIC_GET_STATS_COUNTER(data[15], stats, rx_crc);
+ SLIC_GET_STATS_COUNTER(data[16], stats, rx_oflow802);
+ SLIC_GET_STATS_COUNTER(data[17], stats, rx_uflow802);
+ SLIC_GET_STATS_COUNTER(data[18], stats, tx_packets);
+ SLIC_GET_STATS_COUNTER(data[19], stats, tx_bytes);
+ SLIC_GET_STATS_COUNTER(data[20], stats, tx_carrier);
+ SLIC_GET_STATS_COUNTER(data[21], stats, tx_dropped);
+ SLIC_GET_STATS_COUNTER(data[22], stats, irq_errs);
+}
+
+static void slic_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ if (stringset == ETH_SS_STATS) {
+ memcpy(data, slic_stats_strings, sizeof(slic_stats_strings));
+ data += sizeof(slic_stats_strings);
+ }
+}
+
+static void slic_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct slic_device *sdev = netdev_priv(dev);
+
+ strscpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strscpy(info->bus_info, pci_name(sdev->pdev), sizeof(info->bus_info));
+}
+
+static const struct ethtool_ops slic_ethtool_ops = {
+ .get_drvinfo = slic_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_strings = slic_get_strings,
+ .get_ethtool_stats = slic_get_ethtool_stats,
+ .get_sset_count = slic_get_sset_count,
+};
+
+static const struct net_device_ops slic_netdev_ops = {
+ .ndo_open = slic_open,
+ .ndo_stop = slic_close,
+ .ndo_start_xmit = slic_xmit,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_get_stats64 = slic_get_stats,
+ .ndo_set_rx_mode = slic_set_rx_mode,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static u16 slic_eeprom_csum(unsigned char *eeprom, unsigned int len)
+{
+ unsigned char *ptr = eeprom;
+ u32 csum = 0;
+ __le16 data;
+
+ while (len > 1) {
+ memcpy(&data, ptr, sizeof(data));
+ csum += le16_to_cpu(data);
+ ptr += 2;
+ len -= 2;
+ }
+ if (len > 0)
+ csum += *(u8 *)ptr;
+ while (csum >> 16)
+ csum = (csum & 0xFFFF) + ((csum >> 16) & 0xFFFF);
+ return ~csum;
+}
+
+/* check eeprom size, magic and checksum */
+static bool slic_eeprom_valid(unsigned char *eeprom, unsigned int size)
+{
+ const unsigned int MAX_SIZE = 128;
+ const unsigned int MIN_SIZE = 98;
+ __le16 magic;
+ __le16 csum;
+
+ if (size < MIN_SIZE || size > MAX_SIZE)
+ return false;
+ memcpy(&magic, eeprom, sizeof(magic));
+ if (le16_to_cpu(magic) != SLIC_EEPROM_MAGIC)
+ return false;
+ /* cut checksum bytes */
+ size -= 2;
+ memcpy(&csum, eeprom + size, sizeof(csum));
+
+ return (le16_to_cpu(csum) == slic_eeprom_csum(eeprom, size));
+}
+
+static int slic_read_eeprom(struct slic_device *sdev)
+{
+ unsigned int devfn = PCI_FUNC(sdev->pdev->devfn);
+ struct slic_shmem *sm = &sdev->shmem;
+ struct slic_shmem_data *sm_data = sm->shmem_data;
+ const unsigned int MAX_LOOPS = 5000;
+ unsigned int codesize;
+ unsigned char *eeprom;
+ struct slic_upr *upr;
+ unsigned int i = 0;
+ dma_addr_t paddr;
+ int err = 0;
+ u8 *mac[2];
+
+ eeprom = dma_alloc_coherent(&sdev->pdev->dev, SLIC_EEPROM_SIZE,
+ &paddr, GFP_KERNEL);
+ if (!eeprom)
+ return -ENOMEM;
+
+ slic_write(sdev, SLIC_REG_ICR, SLIC_ICR_INT_OFF);
+ /* setup ISP temporarily */
+ slic_write(sdev, SLIC_REG_ISP, lower_32_bits(sm->isr_paddr));
+
+ err = slic_new_upr(sdev, SLIC_UPR_CONFIG, paddr);
+ if (!err) {
+ for (i = 0; i < MAX_LOOPS; i++) {
+ if (le32_to_cpu(sm_data->isr) & SLIC_ISR_UPC)
+ break;
+ mdelay(1);
+ }
+ if (i == MAX_LOOPS) {
+ dev_err(&sdev->pdev->dev,
+ "timed out while waiting for eeprom data\n");
+ err = -ETIMEDOUT;
+ }
+ upr = slic_dequeue_upr(sdev);
+ kfree(upr);
+ }
+
+ slic_write(sdev, SLIC_REG_ISP, 0);
+ slic_write(sdev, SLIC_REG_ISR, 0);
+ slic_flush_write(sdev);
+
+ if (err)
+ goto free_eeprom;
+
+ if (sdev->model == SLIC_MODEL_OASIS) {
+ struct slic_oasis_eeprom *oee;
+
+ oee = (struct slic_oasis_eeprom *)eeprom;
+ mac[0] = oee->mac;
+ mac[1] = oee->mac2;
+ codesize = le16_to_cpu(oee->eeprom_code_size);
+ } else {
+ struct slic_mojave_eeprom *mee;
+
+ mee = (struct slic_mojave_eeprom *)eeprom;
+ mac[0] = mee->mac;
+ mac[1] = mee->mac2;
+ codesize = le16_to_cpu(mee->eeprom_code_size);
+ }
+
+ if (!slic_eeprom_valid(eeprom, codesize)) {
+ dev_err(&sdev->pdev->dev, "invalid checksum in eeprom\n");
+ err = -EINVAL;
+ goto free_eeprom;
+ }
+ /* set mac address */
+ eth_hw_addr_set(sdev->netdev, mac[devfn]);
+free_eeprom:
+ dma_free_coherent(&sdev->pdev->dev, SLIC_EEPROM_SIZE, eeprom, paddr);
+
+ return err;
+}
+
+static int slic_init(struct slic_device *sdev)
+{
+ int err;
+
+ spin_lock_init(&sdev->upper_lock);
+ spin_lock_init(&sdev->link_lock);
+ INIT_LIST_HEAD(&sdev->upr_list.list);
+ spin_lock_init(&sdev->upr_list.lock);
+ u64_stats_init(&sdev->stats.syncp);
+
+ slic_card_reset(sdev);
+
+ err = slic_load_firmware(sdev);
+ if (err) {
+ dev_err(&sdev->pdev->dev, "failed to load firmware\n");
+ return err;
+ }
+
+ /* we need the shared memory to read EEPROM so set it up temporarily */
+ err = slic_init_shmem(sdev);
+ if (err) {
+ dev_err(&sdev->pdev->dev, "failed to init shared memory\n");
+ return err;
+ }
+
+ err = slic_read_eeprom(sdev);
+ if (err) {
+ dev_err(&sdev->pdev->dev, "failed to read eeprom\n");
+ goto free_sm;
+ }
+
+ slic_card_reset(sdev);
+ slic_free_shmem(sdev);
+
+ return 0;
+free_sm:
+ slic_free_shmem(sdev);
+
+ return err;
+}
+
+static bool slic_is_fiber(unsigned short subdev)
+{
+ switch (subdev) {
+ /* Mojave */
+ case PCI_SUBDEVICE_ID_ALACRITECH_1000X1F:
+ case PCI_SUBDEVICE_ID_ALACRITECH_SES1001F: fallthrough;
+ /* Oasis */
+ case PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XF:
+ case PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XF:
+ case PCI_SUBDEVICE_ID_ALACRITECH_SEN2104EF:
+ case PCI_SUBDEVICE_ID_ALACRITECH_SEN2102EF:
+ return true;
+ }
+ return false;
+}
+
+static void slic_configure_pci(struct pci_dev *pdev)
+{
+ u16 old;
+ u16 cmd;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &old);
+
+ cmd = old | PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+ if (old != cmd)
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+}
+
+static int slic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct slic_device *sdev;
+ struct net_device *dev;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable PCI device\n");
+ return err;
+ }
+
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+
+ slic_configure_pci(pdev);
+
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "failed to setup DMA\n");
+ goto disable;
+ }
+
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ dev_err(&pdev->dev, "failed to obtain PCI regions\n");
+ goto disable;
+ }
+
+ dev = alloc_etherdev(sizeof(*sdev));
+ if (!dev) {
+ dev_err(&pdev->dev, "failed to alloc ethernet device\n");
+ err = -ENOMEM;
+ goto free_regions;
+ }
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ pci_set_drvdata(pdev, dev);
+ dev->irq = pdev->irq;
+ dev->netdev_ops = &slic_netdev_ops;
+ dev->hw_features = NETIF_F_RXCSUM;
+ dev->features |= dev->hw_features;
+
+ dev->ethtool_ops = &slic_ethtool_ops;
+
+ sdev = netdev_priv(dev);
+ sdev->model = (pdev->device == PCI_DEVICE_ID_ALACRITECH_OASIS) ?
+ SLIC_MODEL_OASIS : SLIC_MODEL_MOJAVE;
+ sdev->is_fiber = slic_is_fiber(pdev->subsystem_device);
+ sdev->pdev = pdev;
+ sdev->netdev = dev;
+ sdev->regs = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (!sdev->regs) {
+ dev_err(&pdev->dev, "failed to map registers\n");
+ err = -ENOMEM;
+ goto free_netdev;
+ }
+
+ err = slic_init(sdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to initialize driver\n");
+ goto unmap;
+ }
+
+ netif_napi_add(dev, &sdev->napi, slic_poll);
+ netif_carrier_off(dev);
+
+ err = register_netdev(dev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register net device: %i\n", err);
+ goto unmap;
+ }
+
+ return 0;
+
+unmap:
+ iounmap(sdev->regs);
+free_netdev:
+ free_netdev(dev);
+free_regions:
+ pci_release_regions(pdev);
+disable:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void slic_remove(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct slic_device *sdev = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ iounmap(sdev->regs);
+ free_netdev(dev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static struct pci_driver slic_driver = {
+ .name = DRV_NAME,
+ .id_table = slic_id_tbl,
+ .probe = slic_probe,
+ .remove = slic_remove,
+};
+
+module_pci_driver(slic_driver);
+
+MODULE_DESCRIPTION("Alacritech non-accelerated SLIC driver");
+MODULE_AUTHOR("Lino Sanfilippo <LinoSanfilippo@gmx.de>");
+MODULE_LICENSE("GPL");