diff options
Diffstat (limited to 'drivers/net/ethernet/atheros/atlx/atl1.c')
| -rw-r--r-- | drivers/net/ethernet/atheros/atlx/atl1.c | 3651 |
1 files changed, 3651 insertions, 0 deletions
diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c new file mode 100644 index 000000000..02aa6fd8e --- /dev/null +++ b/drivers/net/ethernet/atheros/atlx/atl1.c @@ -0,0 +1,3651 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com> + * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com> + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * Contact Information: + * Xiong Huang <xiong.huang@atheros.com> + * Jie Yang <jie.yang@atheros.com> + * Chris Snook <csnook@redhat.com> + * Jay Cliburn <jcliburn@gmail.com> + * + * This version is adapted from the Attansic reference driver. + * + * TODO: + * Add more ethtool functions. + * Fix abstruse irq enable/disable condition described here: + * http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2 + * + * NEEDS TESTING: + * VLAN + * multicast + * promiscuous mode + * interrupt coalescing + * SMP torture testing + */ + +#include <linux/atomic.h> +#include <asm/byteorder.h> + +#include <linux/compiler.h> +#include <linux/crc32.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/etherdevice.h> +#include <linux/hardirq.h> +#include <linux/if_ether.h> +#include <linux/if_vlan.h> +#include <linux/in.h> +#include <linux/interrupt.h> +#include <linux/ip.h> +#include <linux/irqflags.h> +#include <linux/irqreturn.h> +#include <linux/jiffies.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/net.h> +#include <linux/netdevice.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/pm.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/tcp.h> +#include <linux/timer.h> +#include <linux/types.h> +#include <linux/workqueue.h> + +#include <net/checksum.h> + +#include "atl1.h" + +MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, " + "Chris Snook <csnook@redhat.com>, " + "Jay Cliburn <jcliburn@gmail.com>"); +MODULE_LICENSE("GPL"); + +/* Temporary hack for merging atl1 and atl2 */ +#include "atlx.c" + +static const struct ethtool_ops atl1_ethtool_ops; + +/* + * This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ +#define ATL1_MAX_NIC 4 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 + +#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET } + +/* + * Interrupt Moderate Timer in units of 2 us + * + * Valid Range: 10-65535 + * + * Default Value: 100 (200us) + */ +static int int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; +static unsigned int num_int_mod_timer; +module_param_array_named(int_mod_timer, int_mod_timer, int, + &num_int_mod_timer, 0); +MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer"); + +#define DEFAULT_INT_MOD_CNT 100 /* 200us */ +#define MAX_INT_MOD_CNT 65000 +#define MIN_INT_MOD_CNT 50 + +struct atl1_option { + enum { enable_option, range_option, list_option } type; + char *name; + char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + struct atl1_opt_list { + int i; + char *str; + } *p; + } l; + } arg; +}; + +static int atl1_validate_option(int *value, struct atl1_option *opt, + struct pci_dev *pdev) +{ + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + dev_info(&pdev->dev, "%s enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + dev_info(&pdev->dev, "%s disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + dev_info(&pdev->dev, "%s set to %i\n", opt->name, + *value); + return 0; + } + break; + case list_option:{ + int i; + struct atl1_opt_list *ent; + + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + dev_info(&pdev->dev, "%s\n", + ent->str); + return 0; + } + } + } + break; + + default: + break; + } + + dev_info(&pdev->dev, "invalid %s specified (%i) %s\n", + opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/** + * atl1_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + */ +static void atl1_check_options(struct atl1_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int bd = adapter->bd_number; + if (bd >= ATL1_MAX_NIC) { + dev_notice(&pdev->dev, "no configuration for board#%i\n", bd); + dev_notice(&pdev->dev, "using defaults for all values\n"); + } + { /* Interrupt Moderate Timer */ + struct atl1_option opt = { + .type = range_option, + .name = "Interrupt Moderator Timer", + .err = "using default of " + __MODULE_STRING(DEFAULT_INT_MOD_CNT), + .def = DEFAULT_INT_MOD_CNT, + .arg = {.r = {.min = MIN_INT_MOD_CNT, + .max = MAX_INT_MOD_CNT} } + }; + int val; + if (num_int_mod_timer > bd) { + val = int_mod_timer[bd]; + atl1_validate_option(&val, &opt, pdev); + adapter->imt = (u16) val; + } else + adapter->imt = (u16) (opt.def); + } +} + +/* + * atl1_pci_tbl - PCI Device ID Table + */ +static const struct pci_device_id atl1_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)}, + /* required last entry */ + {0,} +}; +MODULE_DEVICE_TABLE(pci, atl1_pci_tbl); + +static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; + +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)"); + +/* + * Reset the transmit and receive units; mask and clear all interrupts. + * hw - Struct containing variables accessed by shared code + * return : 0 or idle status (if error) + */ +static s32 atl1_reset_hw(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + u32 icr; + int i; + + /* + * Clear Interrupt mask to stop board from generating + * interrupts & Clear any pending interrupt events + */ + /* + * atlx_irq_disable(adapter); + * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); + */ + + /* + * Issue Soft Reset to the MAC. This will reset the chip's + * transmit, receive, DMA. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); + ioread32(hw->hw_addr + REG_MASTER_CTRL); + + iowrite16(1, hw->hw_addr + REG_PHY_ENABLE); + ioread16(hw->hw_addr + REG_PHY_ENABLE); + + /* delay about 1ms */ + msleep(1); + + /* Wait at least 10ms for All module to be Idle */ + for (i = 0; i < 10; i++) { + icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); + if (!icr) + break; + /* delay 1 ms */ + msleep(1); + /* FIXME: still the right way to do this? */ + cpu_relax(); + } + + if (icr) { + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); + return icr; + } + + return 0; +} + +/* function about EEPROM + * + * check_eeprom_exist + * return 0 if eeprom exist + */ +static int atl1_check_eeprom_exist(struct atl1_hw *hw) +{ + u32 value; + value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + if (value & SPI_FLASH_CTRL_EN_VPD) { + value &= ~SPI_FLASH_CTRL_EN_VPD; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + } + + value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); + return ((value & 0xFF00) == 0x6C00) ? 0 : 1; +} + +static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) +{ + int i; + u32 control; + + if (offset & 3) + /* address do not align */ + return false; + + iowrite32(0, hw->hw_addr + REG_VPD_DATA); + control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; + iowrite32(control, hw->hw_addr + REG_VPD_CAP); + ioread32(hw->hw_addr + REG_VPD_CAP); + + for (i = 0; i < 10; i++) { + msleep(2); + control = ioread32(hw->hw_addr + REG_VPD_CAP); + if (control & VPD_CAP_VPD_FLAG) + break; + } + if (control & VPD_CAP_VPD_FLAG) { + *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); + return true; + } + /* timeout */ + return false; +} + +/* + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read + */ +static s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) +{ + u32 val; + int i; + + val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << + MDIO_CLK_SEL_SHIFT; + iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); + ioread32(hw->hw_addr + REG_MDIO_CTRL); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + if (!(val & (MDIO_START | MDIO_BUSY))) { + *phy_data = (u16) val; + return 0; + } + return ATLX_ERR_PHY; +} + +#define CUSTOM_SPI_CS_SETUP 2 +#define CUSTOM_SPI_CLK_HI 2 +#define CUSTOM_SPI_CLK_LO 2 +#define CUSTOM_SPI_CS_HOLD 2 +#define CUSTOM_SPI_CS_HI 3 + +static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) +{ + int i; + u32 value; + + iowrite32(0, hw->hw_addr + REG_SPI_DATA); + iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); + + value = SPI_FLASH_CTRL_WAIT_READY | + (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << + SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & + SPI_FLASH_CTRL_CLK_HI_MASK) << + SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & + SPI_FLASH_CTRL_CLK_LO_MASK) << + SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & + SPI_FLASH_CTRL_CS_HOLD_MASK) << + SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & + SPI_FLASH_CTRL_CS_HI_MASK) << + SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << + SPI_FLASH_CTRL_INS_SHIFT; + + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + + value |= SPI_FLASH_CTRL_START; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + + for (i = 0; i < 10; i++) { + msleep(1); + value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + if (!(value & SPI_FLASH_CTRL_START)) + break; + } + + if (value & SPI_FLASH_CTRL_START) + return false; + + *buf = ioread32(hw->hw_addr + REG_SPI_DATA); + + return true; +} + +/* + * get_permanent_address + * return 0 if get valid mac address, + */ +static int atl1_get_permanent_address(struct atl1_hw *hw) +{ + u32 addr[2]; + u32 i, control; + u16 reg; + u8 eth_addr[ETH_ALEN]; + bool key_valid; + + if (is_valid_ether_addr(hw->perm_mac_addr)) + return 0; + + /* init */ + addr[0] = addr[1] = 0; + + if (!atl1_check_eeprom_exist(hw)) { + reg = 0; + key_valid = false; + /* Read out all EEPROM content */ + i = 0; + while (1) { + if (atl1_read_eeprom(hw, i + 0x100, &control)) { + if (key_valid) { + if (reg == REG_MAC_STA_ADDR) + addr[0] = control; + else if (reg == (REG_MAC_STA_ADDR + 4)) + addr[1] = control; + key_valid = false; + } else if ((control & 0xff) == 0x5A) { + key_valid = true; + reg = (u16) (control >> 16); + } else + break; + } else + /* read error */ + break; + i += 4; + } + + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + } + + /* see if SPI FLAGS exist ? */ + addr[0] = addr[1] = 0; + reg = 0; + key_valid = false; + i = 0; + while (1) { + if (atl1_spi_read(hw, i + 0x1f000, &control)) { + if (key_valid) { + if (reg == REG_MAC_STA_ADDR) + addr[0] = control; + else if (reg == (REG_MAC_STA_ADDR + 4)) + addr[1] = control; + key_valid = false; + } else if ((control & 0xff) == 0x5A) { + key_valid = true; + reg = (u16) (control >> 16); + } else + /* data end */ + break; + } else + /* read error */ + break; + i += 4; + } + + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + /* + * On some motherboards, the MAC address is written by the + * BIOS directly to the MAC register during POST, and is + * not stored in eeprom. If all else thus far has failed + * to fetch the permanent MAC address, try reading it directly. + */ + addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); + addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + return 1; +} + +/* + * Reads the adapter's MAC address from the EEPROM + * hw - Struct containing variables accessed by shared code + */ +static s32 atl1_read_mac_addr(struct atl1_hw *hw) +{ + s32 ret = 0; + u16 i; + + if (atl1_get_permanent_address(hw)) { + eth_random_addr(hw->perm_mac_addr); + ret = 1; + } + + for (i = 0; i < ETH_ALEN; i++) + hw->mac_addr[i] = hw->perm_mac_addr[i]; + return ret; +} + +/* + * Hashes an address to determine its location in the multicast table + * hw - Struct containing variables accessed by shared code + * mc_addr - the multicast address to hash + * + * atl1_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB + */ +static u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) +{ + u32 crc32, value = 0; + int i; + + crc32 = ether_crc_le(6, mc_addr); + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); + + return value; +} + +/* + * Sets the bit in the multicast table corresponding to the hash value. + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +static void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta; + + /* + * The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper 7 bits of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); + mta |= (1 << hash_bit); + iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); +} + +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) +{ + int i; + u32 val; + + val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | + (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | + MDIO_SUP_PREAMBLE | + MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); + ioread32(hw->hw_addr + REG_MDIO_CTRL); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if (!(val & (MDIO_START | MDIO_BUSY))) + return 0; + + return ATLX_ERR_PHY; +} + +/* + * Make L001's PHY out of Power Saving State (bug) + * hw - Struct containing variables accessed by shared code + * when power on, L001's PHY always on Power saving State + * (Gigabit Link forbidden) + */ +static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) +{ + s32 ret; + ret = atl1_write_phy_reg(hw, 29, 0x0029); + if (ret) + return ret; + return atl1_write_phy_reg(hw, 30, 0); +} + +/* + * Resets the PHY and make all config validate + * hw - Struct containing variables accessed by shared code + * + * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) + */ +static s32 atl1_phy_reset(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + s32 ret_val; + u16 phy_data; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; + } + } + + ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); + if (ret_val) { + u32 val; + int i; + /* pcie serdes link may be down! */ + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "pcie phy link down\n"); + + for (i = 0; i < 25; i++) { + msleep(1); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if ((val & (MDIO_START | MDIO_BUSY)) != 0) { + if (netif_msg_hw(adapter)) + dev_warn(&pdev->dev, + "pcie link down at least 25ms\n"); + return ret_val; + } + } + return 0; +} + +/* + * Configures PHY autoneg and flow control advertisement settings + * hw - Struct containing variables accessed by shared code + */ +static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) +{ + s32 ret_val; + s16 mii_autoneg_adv_reg; + s16 mii_1000t_ctrl_reg; + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; + + /* Read the MII 1000Base-T Control Register (Address 9). */ + mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK; + + /* + * First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; + mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK; + + /* + * Need to parse media_type and set up + * the appropriate PHY registers. + */ + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | + MII_AR_10T_FD_CAPS | + MII_AR_100TX_HD_CAPS | + MII_AR_100TX_FD_CAPS); + mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; + break; + + case MEDIA_TYPE_1000M_FULL: + mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; + break; + + case MEDIA_TYPE_100M_FULL: + mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; + break; + + case MEDIA_TYPE_100M_HALF: + mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; + break; + + case MEDIA_TYPE_10M_FULL: + mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; + break; + + default: + mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; + break; + } + + /* flow control fixed to enable all */ + mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); + + hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; + hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; + + ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + + return 0; +} + +/* + * Configures link settings. + * hw - Struct containing variables accessed by shared code + * Assumes the hardware has previously been reset and the + * transmitter and receiver are not enabled. + */ +static s32 atl1_setup_link(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + s32 ret_val; + + /* + * Options: + * PHY will advertise value(s) parsed from + * autoneg_advertised and fc + * no matter what autoneg is , We will not wait link result. + */ + ret_val = atl1_phy_setup_autoneg_adv(hw); + if (ret_val) { + if (netif_msg_link(adapter)) + dev_dbg(&pdev->dev, + "error setting up autonegotiation\n"); + return ret_val; + } + /* SW.Reset , En-Auto-Neg if needed */ + ret_val = atl1_phy_reset(hw); + if (ret_val) { + if (netif_msg_link(adapter)) + dev_dbg(&pdev->dev, "error resetting phy\n"); + return ret_val; + } + hw->phy_configured = true; + return ret_val; +} + +static void atl1_init_flash_opcode(struct atl1_hw *hw) +{ + if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) + /* Atmel */ + hw->flash_vendor = 0; + + /* Init OP table */ + iowrite8(flash_table[hw->flash_vendor].cmd_program, + hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); + iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, + hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); + iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, + hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); + iowrite8(flash_table[hw->flash_vendor].cmd_rdid, + hw->hw_addr + REG_SPI_FLASH_OP_RDID); + iowrite8(flash_table[hw->flash_vendor].cmd_wren, + hw->hw_addr + REG_SPI_FLASH_OP_WREN); + iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, + hw->hw_addr + REG_SPI_FLASH_OP_RDSR); + iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, + hw->hw_addr + REG_SPI_FLASH_OP_WRSR); + iowrite8(flash_table[hw->flash_vendor].cmd_read, + hw->hw_addr + REG_SPI_FLASH_OP_READ); +} + +/* + * Performs basic configuration of the adapter. + * hw - Struct containing variables accessed by shared code + * Assumes that the controller has previously been reset and is in a + * post-reset uninitialized state. Initializes multicast table, + * and Calls routines to setup link + * Leaves the transmit and receive units disabled and uninitialized. + */ +static s32 atl1_init_hw(struct atl1_hw *hw) +{ + u32 ret_val = 0; + + /* Zero out the Multicast HASH table */ + iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); + /* clear the old settings from the multicast hash table */ + iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); + + atl1_init_flash_opcode(hw); + + if (!hw->phy_configured) { + /* enable GPHY LinkChange Interrupt */ + ret_val = atl1_write_phy_reg(hw, 18, 0xC00); + if (ret_val) + return ret_val; + /* make PHY out of power-saving state */ + ret_val = atl1_phy_leave_power_saving(hw); + if (ret_val) + return ret_val; + /* Call a subroutine to configure the link */ + ret_val = atl1_setup_link(hw); + } + return ret_val; +} + +/* + * Detects the current speed and duplex settings of the hardware. + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) +{ + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + s32 ret_val; + u16 phy_data; + + /* ; --- Read PHY Specific Status Register (17) */ + ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data); + if (ret_val) + return ret_val; + + if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED)) + return ATLX_ERR_PHY_RES; + + switch (phy_data & MII_ATLX_PSSR_SPEED) { + case MII_ATLX_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case MII_ATLX_PSSR_100MBS: + *speed = SPEED_100; + break; + case MII_ATLX_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "error getting speed\n"); + return ATLX_ERR_PHY_SPEED; + } + if (phy_data & MII_ATLX_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return 0; +} + +static void atl1_set_mac_addr(struct atl1_hw *hw) +{ + u32 value; + /* + * 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword + */ + value = (((u32) hw->mac_addr[2]) << 24) | + (((u32) hw->mac_addr[3]) << 16) | + (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); + iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); + /* high dword */ + value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); + iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); +} + +/** + * atl1_sw_init - Initialize general software structures (struct atl1_adapter) + * @adapter: board private structure to initialize + * + * atl1_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + */ +static int atl1_sw_init(struct atl1_adapter *adapter) +{ + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + + hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + + adapter->wol = 0; + device_set_wakeup_enable(&adapter->pdev->dev, false); + adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7; + adapter->ict = 50000; /* 100ms */ + adapter->link_speed = SPEED_0; /* hardware init */ + adapter->link_duplex = FULL_DUPLEX; + + hw->phy_configured = false; + hw->preamble_len = 7; + hw->ipgt = 0x60; + hw->min_ifg = 0x50; + hw->ipgr1 = 0x40; + hw->ipgr2 = 0x60; + hw->max_retry = 0xf; + hw->lcol = 0x37; + hw->jam_ipg = 7; + hw->rfd_burst = 8; + hw->rrd_burst = 8; + hw->rfd_fetch_gap = 1; + hw->rx_jumbo_th = adapter->rx_buffer_len / 8; + hw->rx_jumbo_lkah = 1; + hw->rrd_ret_timer = 16; + hw->tpd_burst = 4; + hw->tpd_fetch_th = 16; + hw->txf_burst = 0x100; + hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3; + hw->tpd_fetch_gap = 1; + hw->rcb_value = atl1_rcb_64; + hw->dma_ord = atl1_dma_ord_enh; + hw->dmar_block = atl1_dma_req_256; + hw->dmaw_block = atl1_dma_req_256; + hw->cmb_rrd = 4; + hw->cmb_tpd = 4; + hw->cmb_rx_timer = 1; /* about 2us */ + hw->cmb_tx_timer = 1; /* about 2us */ + hw->smb_timer = 100000; /* about 200ms */ + + spin_lock_init(&adapter->lock); + spin_lock_init(&adapter->mb_lock); + + return 0; +} + +static int mdio_read(struct net_device *netdev, int phy_id, int reg_num) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + u16 result; + + atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result); + + return result; +} + +static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, + int val) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + atl1_write_phy_reg(&adapter->hw, reg_num, val); +} + +static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + int retval; + + if (!netif_running(netdev)) + return -EINVAL; + + spin_lock_irqsave(&adapter->lock, flags); + retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); + spin_unlock_irqrestore(&adapter->lock, flags); + + return retval; +} + +/** + * atl1_setup_ring_resources - allocate Tx / RX descriptor resources + * @adapter: board private structure + * + * Return 0 on success, negative on failure + */ +static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_ring_header *ring_header = &adapter->ring_header; + struct pci_dev *pdev = adapter->pdev; + int size; + u8 offset = 0; + + size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); + tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); + if (unlikely(!tpd_ring->buffer_info)) { + if (netif_msg_drv(adapter)) + dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", + size); + goto err_nomem; + } + rfd_ring->buffer_info = + (tpd_ring->buffer_info + tpd_ring->count); + + /* + * real ring DMA buffer + * each ring/block may need up to 8 bytes for alignment, hence the + * additional 40 bytes tacked onto the end. + */ + ring_header->size = + sizeof(struct tx_packet_desc) * tpd_ring->count + + sizeof(struct rx_free_desc) * rfd_ring->count + + sizeof(struct rx_return_desc) * rrd_ring->count + + sizeof(struct coals_msg_block) + + sizeof(struct stats_msg_block) + + 40; + + ring_header->desc = dma_alloc_coherent(&pdev->dev, ring_header->size, + &ring_header->dma, GFP_KERNEL); + if (unlikely(!ring_header->desc)) { + if (netif_msg_drv(adapter)) + dev_err(&pdev->dev, "dma_alloc_coherent failed\n"); + goto err_nomem; + } + + /* init TPD ring */ + tpd_ring->dma = ring_header->dma; + offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0; + tpd_ring->dma += offset; + tpd_ring->desc = (u8 *) ring_header->desc + offset; + tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count; + + /* init RFD ring */ + rfd_ring->dma = tpd_ring->dma + tpd_ring->size; + offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0; + rfd_ring->dma += offset; + rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset); + rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count; + + + /* init RRD ring */ + rrd_ring->dma = rfd_ring->dma + rfd_ring->size; + offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0; + rrd_ring->dma += offset; + rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset); + rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count; + + + /* init CMB */ + adapter->cmb.dma = rrd_ring->dma + rrd_ring->size; + offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0; + adapter->cmb.dma += offset; + adapter->cmb.cmb = (struct coals_msg_block *) + ((u8 *) rrd_ring->desc + (rrd_ring->size + offset)); + + /* init SMB */ + adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block); + offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0; + adapter->smb.dma += offset; + adapter->smb.smb = (struct stats_msg_block *) + ((u8 *) adapter->cmb.cmb + + (sizeof(struct coals_msg_block) + offset)); + + return 0; + +err_nomem: + kfree(tpd_ring->buffer_info); + return -ENOMEM; +} + +static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + + atomic_set(&tpd_ring->next_to_use, 0); + atomic_set(&tpd_ring->next_to_clean, 0); + + rfd_ring->next_to_clean = 0; + atomic_set(&rfd_ring->next_to_use, 0); + + rrd_ring->next_to_use = 0; + atomic_set(&rrd_ring->next_to_clean, 0); +} + +/** + * atl1_clean_rx_ring - Free RFD Buffers + * @adapter: board private structure + */ +static void atl1_clean_rx_ring(struct atl1_adapter *adapter) +{ + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; + + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rfd_ring->count; i++) { + buffer_info = &rfd_ring->buffer_info[i]; + if (buffer_info->dma) { + dma_unmap_page(&pdev->dev, buffer_info->dma, + buffer_info->length, DMA_FROM_DEVICE); + buffer_info->dma = 0; + } + if (buffer_info->skb) { + dev_kfree_skb(buffer_info->skb); + buffer_info->skb = NULL; + } + } + + size = sizeof(struct atl1_buffer) * rfd_ring->count; + memset(rfd_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(rfd_ring->desc, 0, rfd_ring->size); + + rfd_ring->next_to_clean = 0; + atomic_set(&rfd_ring->next_to_use, 0); + + rrd_ring->next_to_use = 0; + atomic_set(&rrd_ring->next_to_clean, 0); +} + +/** + * atl1_clean_tx_ring - Free Tx Buffers + * @adapter: board private structure + */ +static void atl1_clean_tx_ring(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; + + /* Free all the Tx ring sk_buffs */ + for (i = 0; i < tpd_ring->count; i++) { + buffer_info = &tpd_ring->buffer_info[i]; + if (buffer_info->dma) { + dma_unmap_page(&pdev->dev, buffer_info->dma, + buffer_info->length, DMA_TO_DEVICE); + buffer_info->dma = 0; + } + } + + for (i = 0; i < tpd_ring->count; i++) { + buffer_info = &tpd_ring->buffer_info[i]; + if (buffer_info->skb) { + dev_kfree_skb_any(buffer_info->skb); + buffer_info->skb = NULL; + } + } + + size = sizeof(struct atl1_buffer) * tpd_ring->count; + memset(tpd_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(tpd_ring->desc, 0, tpd_ring->size); + + atomic_set(&tpd_ring->next_to_use, 0); + atomic_set(&tpd_ring->next_to_clean, 0); +} + +/** + * atl1_free_ring_resources - Free Tx / RX descriptor Resources + * @adapter: board private structure + * + * Free all transmit software resources + */ +static void atl1_free_ring_resources(struct atl1_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_ring_header *ring_header = &adapter->ring_header; + + atl1_clean_tx_ring(adapter); + atl1_clean_rx_ring(adapter); + + kfree(tpd_ring->buffer_info); + dma_free_coherent(&pdev->dev, ring_header->size, ring_header->desc, + ring_header->dma); + + tpd_ring->buffer_info = NULL; + tpd_ring->desc = NULL; + tpd_ring->dma = 0; + + rfd_ring->buffer_info = NULL; + rfd_ring->desc = NULL; + rfd_ring->dma = 0; + + rrd_ring->desc = NULL; + rrd_ring->dma = 0; + + adapter->cmb.dma = 0; + adapter->cmb.cmb = NULL; + + adapter->smb.dma = 0; + adapter->smb.smb = NULL; +} + +static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) +{ + u32 value; + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + /* Config MAC CTRL Register */ + value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; + /* duplex */ + if (FULL_DUPLEX == adapter->link_duplex) + value |= MAC_CTRL_DUPLX; + /* speed */ + value |= ((u32) ((SPEED_1000 == adapter->link_speed) ? + MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << + MAC_CTRL_SPEED_SHIFT); + /* flow control */ + value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); + /* PAD & CRC */ + value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); + /* preamble length */ + value |= (((u32) adapter->hw.preamble_len + & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); + /* vlan */ + __atlx_vlan_mode(netdev->features, &value); + /* rx checksum + if (adapter->rx_csum) + value |= MAC_CTRL_RX_CHKSUM_EN; + */ + /* filter mode */ + value |= MAC_CTRL_BC_EN; + if (netdev->flags & IFF_PROMISC) + value |= MAC_CTRL_PROMIS_EN; + else if (netdev->flags & IFF_ALLMULTI) + value |= MAC_CTRL_MC_ALL_EN; + /* value |= MAC_CTRL_LOOPBACK; */ + iowrite32(value, hw->hw_addr + REG_MAC_CTRL); +} + +static u32 atl1_check_link(struct atl1_adapter *adapter) +{ + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 ret_val; + u16 speed, duplex, phy_data; + int reconfig = 0; + + /* MII_BMSR must read twice */ + atl1_read_phy_reg(hw, MII_BMSR, &phy_data); + atl1_read_phy_reg(hw, MII_BMSR, &phy_data); + if (!(phy_data & BMSR_LSTATUS)) { + /* link down */ + if (netif_carrier_ok(netdev)) { + /* old link state: Up */ + if (netif_msg_link(adapter)) + dev_info(&adapter->pdev->dev, "link is down\n"); + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + } + return 0; + } + + /* Link Up */ + ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) + return ret_val; + + switch (hw->media_type) { + case MEDIA_TYPE_1000M_FULL: + if (speed != SPEED_1000 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_100M_FULL: + if (speed != SPEED_100 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_100M_HALF: + if (speed != SPEED_100 || duplex != HALF_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_10M_FULL: + if (speed != SPEED_10 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_10M_HALF: + if (speed != SPEED_10 || duplex != HALF_DUPLEX) + reconfig = 1; + break; + } + + /* link result is our setting */ + if (!reconfig) { + if (adapter->link_speed != speed || + adapter->link_duplex != duplex) { + adapter->link_speed = speed; + adapter->link_duplex = duplex; + atl1_setup_mac_ctrl(adapter); + if (netif_msg_link(adapter)) + dev_info(&adapter->pdev->dev, + "%s link is up %d Mbps %s\n", + netdev->name, adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "full duplex" : "half duplex"); + } + if (!netif_carrier_ok(netdev)) { + /* Link down -> Up */ + netif_carrier_on(netdev); + } + return 0; + } + + /* change original link status */ + if (netif_carrier_ok(netdev)) { + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + + if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR && + hw->media_type != MEDIA_TYPE_1000M_FULL) { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; + } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); + return 0; + } + + /* auto-neg, insert timer to re-config phy */ + if (!adapter->phy_timer_pending) { + adapter->phy_timer_pending = true; + mod_timer(&adapter->phy_config_timer, + round_jiffies(jiffies + 3 * HZ)); + } + + return 0; +} + +static void set_flow_ctrl_old(struct atl1_adapter *adapter) +{ + u32 hi, lo, value; + + /* RFD Flow Control */ + value = adapter->rfd_ring.count; + hi = value / 16; + if (hi < 2) + hi = 2; + lo = value * 7 / 8; + + value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH); + + /* RRD Flow Control */ + value = adapter->rrd_ring.count; + lo = value / 16; + hi = value * 7 / 8; + if (lo < 2) + lo = 2; + value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH); +} + +static void set_flow_ctrl_new(struct atl1_hw *hw) +{ + u32 hi, lo, value; + + /* RXF Flow Control */ + value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN); + lo = value / 16; + if (lo < 192) + lo = 192; + hi = value * 7 / 8; + if (hi < lo) + hi = lo + 16; + value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH); + + /* RRD Flow Control */ + value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN); + lo = value / 8; + hi = value * 7 / 8; + if (lo < 2) + lo = 2; + if (hi < lo) + hi = lo + 3; + value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); +} + +/** + * atl1_configure - Configure Transmit&Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Tx /Rx unit of the MAC after a reset. + */ +static u32 atl1_configure(struct atl1_adapter *adapter) +{ + struct atl1_hw *hw = &adapter->hw; + u32 value; + + /* clear interrupt status */ + iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR); + + /* set MAC Address */ + value = (((u32) hw->mac_addr[2]) << 24) | + (((u32) hw->mac_addr[3]) << 16) | + (((u32) hw->mac_addr[4]) << 8) | + (((u32) hw->mac_addr[5])); + iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); + value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); + iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4)); + + /* tx / rx ring */ + + /* HI base address */ + iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32), + hw->hw_addr + REG_DESC_BASE_ADDR_HI); + /* LO base address */ + iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_RFD_ADDR_LO); + iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_RRD_ADDR_LO); + iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_TPD_ADDR_LO); + iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_CMB_ADDR_LO); + iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_SMB_ADDR_LO); + + /* element count */ + value = adapter->rrd_ring.count; + value <<= 16; + value += adapter->rfd_ring.count; + iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE); + iowrite32(adapter->tpd_ring.count, hw->hw_addr + + REG_DESC_TPD_RING_SIZE); + + /* Load Ptr */ + iowrite32(1, hw->hw_addr + REG_LOAD_PTR); + + /* config Mailbox */ + value = ((atomic_read(&adapter->tpd_ring.next_to_use) + & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) | + ((atomic_read(&adapter->rrd_ring.next_to_clean) + & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) | + ((atomic_read(&adapter->rfd_ring.next_to_use) + & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAILBOX); + + /* config IPG/IFG */ + value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK) + << MAC_IPG_IFG_IPGT_SHIFT) | + (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) + << MAC_IPG_IFG_MIFG_SHIFT) | + (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) + << MAC_IPG_IFG_IPGR1_SHIFT) | + (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) + << MAC_IPG_IFG_IPGR2_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG); + + /* config Half-Duplex Control */ + value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | + (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) + << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | + MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | + (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | + (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) + << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL); + + /* set Interrupt Moderator Timer */ + iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT); + iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL); + + /* set Interrupt Clear Timer */ + iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER); + + /* set max frame size hw will accept */ + iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU); + + /* jumbo size & rrd retirement timer */ + value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) + << RXQ_JMBOSZ_TH_SHIFT) | + (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK) + << RXQ_JMBO_LKAH_SHIFT) | + (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK) + << RXQ_RRD_TIMER_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM); + + /* Flow Control */ + switch (hw->dev_rev) { + case 0x8001: + case 0x9001: + case 0x9002: + case 0x9003: + set_flow_ctrl_old(adapter); + break; + default: + set_flow_ctrl_new(hw); + break; + } + + /* config TXQ */ + value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK) + << TXQ_CTRL_TPD_BURST_NUM_SHIFT) | + (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK) + << TXQ_CTRL_TXF_BURST_NUM_SHIFT) | + (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK) + << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE | + TXQ_CTRL_EN; + iowrite32(value, hw->hw_addr + REG_TXQ_CTRL); + + /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */ + value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK) + << TX_JUMBO_TASK_TH_SHIFT) | + (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK) + << TX_TPD_MIN_IPG_SHIFT); + iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG); + + /* config RXQ */ + value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK) + << RXQ_CTRL_RFD_BURST_NUM_SHIFT) | + (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK) + << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) | + (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK) + << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN | + RXQ_CTRL_EN; + iowrite32(value, hw->hw_addr + REG_RXQ_CTRL); + + /* config DMA Engine */ + value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) + << DMA_CTRL_DMAR_BURST_LEN_SHIFT) | + ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) + << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN | + DMA_CTRL_DMAW_EN; + value |= (u32) hw->dma_ord; + if (atl1_rcb_128 == hw->rcb_value) + value |= DMA_CTRL_RCB_VALUE; + iowrite32(value, hw->hw_addr + REG_DMA_CTRL); + + /* config CMB / SMB */ + value = (hw->cmb_tpd > adapter->tpd_ring.count) ? + hw->cmb_tpd : adapter->tpd_ring.count; + value <<= 16; + value |= hw->cmb_rrd; + iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH); + value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16); + iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER); + iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER); + + /* --- enable CMB / SMB */ + value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN; + iowrite32(value, hw->hw_addr + REG_CSMB_CTRL); + + value = ioread32(adapter->hw.hw_addr + REG_ISR); + if (unlikely((value & ISR_PHY_LINKDOWN) != 0)) + value = 1; /* config failed */ + else + value = 0; + + /* clear all interrupt status */ + iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR); + iowrite32(0, adapter->hw.hw_addr + REG_ISR); + return value; +} + +/* + * atl1_pcie_patch - Patch for PCIE module + */ +static void atl1_pcie_patch(struct atl1_adapter *adapter) +{ + u32 value; + + /* much vendor magic here */ + value = 0x6500; + iowrite32(value, adapter->hw.hw_addr + 0x12FC); + /* pcie flow control mode change */ + value = ioread32(adapter->hw.hw_addr + 0x1008); + value |= 0x8000; + iowrite32(value, adapter->hw.hw_addr + 0x1008); +} + +/* + * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400 + * on PCI Command register is disable. + * The function enable this bit. + * Brackett, 2006/03/15 + */ +static void atl1_via_workaround(struct atl1_adapter *adapter) +{ + unsigned long value; + + value = ioread16(adapter->hw.hw_addr + PCI_COMMAND); + if (value & PCI_COMMAND_INTX_DISABLE) + value &= ~PCI_COMMAND_INTX_DISABLE; + iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND); +} + +static void atl1_inc_smb(struct atl1_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct stats_msg_block *smb = adapter->smb.smb; + + u64 new_rx_errors = smb->rx_frag + + smb->rx_fcs_err + + smb->rx_len_err + + smb->rx_sz_ov + + smb->rx_rxf_ov + + smb->rx_rrd_ov + + smb->rx_align_err; + u64 new_tx_errors = smb->tx_late_col + + smb->tx_abort_col + + smb->tx_underrun + + smb->tx_trunc; + + /* Fill out the OS statistics structure */ + adapter->soft_stats.rx_packets += smb->rx_ok + new_rx_errors; + adapter->soft_stats.tx_packets += smb->tx_ok + new_tx_errors; + adapter->soft_stats.rx_bytes += smb->rx_byte_cnt; + adapter->soft_stats.tx_bytes += smb->tx_byte_cnt; + adapter->soft_stats.multicast += smb->rx_mcast; + adapter->soft_stats.collisions += smb->tx_1_col + + smb->tx_2_col + + smb->tx_late_col + + smb->tx_abort_col; + + /* Rx Errors */ + adapter->soft_stats.rx_errors += new_rx_errors; + adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov; + adapter->soft_stats.rx_length_errors += smb->rx_len_err; + adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err; + adapter->soft_stats.rx_frame_errors += smb->rx_align_err; + + adapter->soft_stats.rx_pause += smb->rx_pause; + adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov; + adapter->soft_stats.rx_trunc += smb->rx_sz_ov; + + /* Tx Errors */ + adapter->soft_stats.tx_errors += new_tx_errors; + adapter->soft_stats.tx_fifo_errors += smb->tx_underrun; + adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col; + adapter->soft_stats.tx_window_errors += smb->tx_late_col; + + adapter->soft_stats.excecol += smb->tx_abort_col; + adapter->soft_stats.deffer += smb->tx_defer; + adapter->soft_stats.scc += smb->tx_1_col; + adapter->soft_stats.mcc += smb->tx_2_col; + adapter->soft_stats.latecol += smb->tx_late_col; + adapter->soft_stats.tx_underrun += smb->tx_underrun; + adapter->soft_stats.tx_trunc += smb->tx_trunc; + adapter->soft_stats.tx_pause += smb->tx_pause; + + netdev->stats.rx_bytes = adapter->soft_stats.rx_bytes; + netdev->stats.tx_bytes = adapter->soft_stats.tx_bytes; + netdev->stats.multicast = adapter->soft_stats.multicast; + netdev->stats.collisions = adapter->soft_stats.collisions; + netdev->stats.rx_errors = adapter->soft_stats.rx_errors; + netdev->stats.rx_length_errors = + adapter->soft_stats.rx_length_errors; + netdev->stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors; + netdev->stats.rx_frame_errors = + adapter->soft_stats.rx_frame_errors; + netdev->stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors; + netdev->stats.rx_dropped = adapter->soft_stats.rx_rrd_ov; + netdev->stats.tx_errors = adapter->soft_stats.tx_errors; + netdev->stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors; + netdev->stats.tx_aborted_errors = + adapter->soft_stats.tx_aborted_errors; + netdev->stats.tx_window_errors = + adapter->soft_stats.tx_window_errors; + netdev->stats.tx_carrier_errors = + adapter->soft_stats.tx_carrier_errors; + + netdev->stats.rx_packets = adapter->soft_stats.rx_packets; + netdev->stats.tx_packets = adapter->soft_stats.tx_packets; +} + +static void atl1_update_mailbox(struct atl1_adapter *adapter) +{ + unsigned long flags; + u32 tpd_next_to_use; + u32 rfd_next_to_use; + u32 rrd_next_to_clean; + u32 value; + + spin_lock_irqsave(&adapter->mb_lock, flags); + + tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); + rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use); + rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean); + + value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << + MB_RFD_PROD_INDX_SHIFT) | + ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << + MB_RRD_CONS_INDX_SHIFT) | + ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << + MB_TPD_PROD_INDX_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); + + spin_unlock_irqrestore(&adapter->mb_lock, flags); +} + +static void atl1_clean_alloc_flag(struct atl1_adapter *adapter, + struct rx_return_desc *rrd, u16 offset) +{ + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + + while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) { + rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0; + if (++rfd_ring->next_to_clean == rfd_ring->count) { + rfd_ring->next_to_clean = 0; + } + } +} + +static void atl1_update_rfd_index(struct atl1_adapter *adapter, + struct rx_return_desc *rrd) +{ + u16 num_buf; + + num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) / + adapter->rx_buffer_len; + if (rrd->num_buf == num_buf) + /* clean alloc flag for bad rrd */ + atl1_clean_alloc_flag(adapter, rrd, num_buf); +} + +static void atl1_rx_checksum(struct atl1_adapter *adapter, + struct rx_return_desc *rrd, struct sk_buff *skb) +{ + struct pci_dev *pdev = adapter->pdev; + + /* + * The L1 hardware contains a bug that erroneously sets the + * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a + * fragmented IP packet is received, even though the packet + * is perfectly valid and its checksum is correct. There's + * no way to distinguish between one of these good packets + * and a packet that actually contains a TCP/UDP checksum + * error, so all we can do is allow it to be handed up to + * the higher layers and let it be sorted out there. + */ + + skb_checksum_none_assert(skb); + + if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { + if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | + ERR_FLAG_CODE | ERR_FLAG_OV)) { + adapter->hw_csum_err++; + if (netif_msg_rx_err(adapter)) + dev_printk(KERN_DEBUG, &pdev->dev, + "rx checksum error\n"); + return; + } + } + + /* not IPv4 */ + if (!(rrd->pkt_flg & PACKET_FLAG_IPV4)) + /* checksum is invalid, but it's not an IPv4 pkt, so ok */ + return; + + /* IPv4 packet */ + if (likely(!(rrd->err_flg & + (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + adapter->hw_csum_good++; + return; + } +} + +/** + * atl1_alloc_rx_buffers - Replace used receive buffers + * @adapter: address of board private structure + */ +static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter) +{ + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct pci_dev *pdev = adapter->pdev; + struct page *page; + unsigned long offset; + struct atl1_buffer *buffer_info, *next_info; + struct sk_buff *skb; + u16 num_alloc = 0; + u16 rfd_next_to_use, next_next; + struct rx_free_desc *rfd_desc; + + next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use); + if (++next_next == rfd_ring->count) + next_next = 0; + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + + while (!buffer_info->alloced && !next_info->alloced) { + if (buffer_info->skb) { + buffer_info->alloced = 1; + goto next; + } + + rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use); + + skb = netdev_alloc_skb_ip_align(adapter->netdev, + adapter->rx_buffer_len); + if (unlikely(!skb)) { + /* Better luck next round */ + adapter->soft_stats.rx_dropped++; + break; + } + + buffer_info->alloced = 1; + buffer_info->skb = skb; + buffer_info->length = (u16) adapter->rx_buffer_len; + page = virt_to_page(skb->data); + offset = offset_in_page(skb->data); + buffer_info->dma = dma_map_page(&pdev->dev, page, offset, + adapter->rx_buffer_len, + DMA_FROM_DEVICE); + rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); + rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len); + rfd_desc->coalese = 0; + +next: + rfd_next_to_use = next_next; + if (unlikely(++next_next == rfd_ring->count)) + next_next = 0; + + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + num_alloc++; + } + + if (num_alloc) { + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use); + } + return num_alloc; +} + +static int atl1_intr_rx(struct atl1_adapter *adapter, int budget) +{ + int i, count; + u16 length; + u16 rrd_next_to_clean; + u32 value; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_buffer *buffer_info; + struct rx_return_desc *rrd; + struct sk_buff *skb; + + count = 0; + + rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean); + + while (count < budget) { + rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean); + i = 1; + if (likely(rrd->xsz.valid)) { /* packet valid */ +chk_rrd: + /* check rrd status */ + if (likely(rrd->num_buf == 1)) + goto rrd_ok; + else if (netif_msg_rx_err(adapter)) { + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "unexpected RRD buffer count\n"); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "rx_buf_len = %d\n", + adapter->rx_buffer_len); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD num_buf = %d\n", + rrd->num_buf); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD pkt_len = %d\n", + rrd->xsz.xsum_sz.pkt_size); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD pkt_flg = 0x%08X\n", + rrd->pkt_flg); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD err_flg = 0x%08X\n", + rrd->err_flg); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD vlan_tag = 0x%08X\n", + rrd->vlan_tag); + } + + /* rrd seems to be bad */ + if (unlikely(i-- > 0)) { + /* rrd may not be DMAed completely */ + udelay(1); + goto chk_rrd; + } + /* bad rrd */ + if (netif_msg_rx_err(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "bad RRD\n"); + /* see if update RFD index */ + if (rrd->num_buf > 1) + atl1_update_rfd_index(adapter, rrd); + + /* update rrd */ + rrd->xsz.valid = 0; + if (++rrd_next_to_clean == rrd_ring->count) + rrd_next_to_clean = 0; + count++; + continue; + } else { /* current rrd still not be updated */ + + break; + } +rrd_ok: + /* clean alloc flag for bad rrd */ + atl1_clean_alloc_flag(adapter, rrd, 0); + + buffer_info = &rfd_ring->buffer_info[rrd->buf_indx]; + if (++rfd_ring->next_to_clean == rfd_ring->count) + rfd_ring->next_to_clean = 0; + + /* update rrd next to clean */ + if (++rrd_next_to_clean == rrd_ring->count) + rrd_next_to_clean = 0; + count++; + + if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { + if (!(rrd->err_flg & + (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM + | ERR_FLAG_LEN))) { + /* packet error, don't need upstream */ + buffer_info->alloced = 0; + rrd->xsz.valid = 0; + continue; + } + } + + /* Good Receive */ + dma_unmap_page(&adapter->pdev->dev, buffer_info->dma, + buffer_info->length, DMA_FROM_DEVICE); + buffer_info->dma = 0; + skb = buffer_info->skb; + length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); + + skb_put(skb, length - ETH_FCS_LEN); + + /* Receive Checksum Offload */ + atl1_rx_checksum(adapter, rrd, skb); + skb->protocol = eth_type_trans(skb, adapter->netdev); + + if (rrd->pkt_flg & PACKET_FLAG_VLAN_INS) { + u16 vlan_tag = (rrd->vlan_tag >> 4) | + ((rrd->vlan_tag & 7) << 13) | + ((rrd->vlan_tag & 8) << 9); + + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); + } + netif_receive_skb(skb); + + /* let protocol layer free skb */ + buffer_info->skb = NULL; + buffer_info->alloced = 0; + rrd->xsz.valid = 0; + } + + atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean); + + atl1_alloc_rx_buffers(adapter); + + /* update mailbox ? */ + if (count) { + u32 tpd_next_to_use; + u32 rfd_next_to_use; + + spin_lock(&adapter->mb_lock); + + tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); + rfd_next_to_use = + atomic_read(&adapter->rfd_ring.next_to_use); + rrd_next_to_clean = + atomic_read(&adapter->rrd_ring.next_to_clean); + value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << + MB_RFD_PROD_INDX_SHIFT) | + ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << + MB_RRD_CONS_INDX_SHIFT) | + ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << + MB_TPD_PROD_INDX_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); + spin_unlock(&adapter->mb_lock); + } + + return count; +} + +static int atl1_intr_tx(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + u16 sw_tpd_next_to_clean; + u16 cmb_tpd_next_to_clean; + int count = 0; + + sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean); + cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx); + + while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) { + buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean]; + if (buffer_info->dma) { + dma_unmap_page(&adapter->pdev->dev, buffer_info->dma, + buffer_info->length, DMA_TO_DEVICE); + buffer_info->dma = 0; + } + + if (buffer_info->skb) { + dev_consume_skb_irq(buffer_info->skb); + buffer_info->skb = NULL; + } + + if (++sw_tpd_next_to_clean == tpd_ring->count) + sw_tpd_next_to_clean = 0; + + count++; + } + atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean); + + if (netif_queue_stopped(adapter->netdev) && + netif_carrier_ok(adapter->netdev)) + netif_wake_queue(adapter->netdev); + + return count; +} + +static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) +{ + u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); + u16 next_to_use = atomic_read(&tpd_ring->next_to_use); + return (next_to_clean > next_to_use) ? + next_to_clean - next_to_use - 1 : + tpd_ring->count + next_to_clean - next_to_use - 1; +} + +static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, + struct tx_packet_desc *ptpd) +{ + u8 hdr_len, ip_off; + u32 real_len; + + if (skb_shinfo(skb)->gso_size) { + int err; + + err = skb_cow_head(skb, 0); + if (err < 0) + return err; + + if (skb->protocol == htons(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + + real_len = (((unsigned char *)iph - skb->data) + + ntohs(iph->tot_len)); + if (real_len < skb->len) { + err = pskb_trim(skb, real_len); + if (err) + return err; + } + hdr_len = skb_tcp_all_headers(skb); + if (skb->len == hdr_len) { + iph->check = 0; + tcp_hdr(skb)->check = + ~csum_tcpudp_magic(iph->saddr, + iph->daddr, tcp_hdrlen(skb), + IPPROTO_TCP, 0); + ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << + TPD_IPHL_SHIFT; + ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & + TPD_TCPHDRLEN_MASK) << + TPD_TCPHDRLEN_SHIFT; + ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT; + ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT; + return 1; + } + + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, IPPROTO_TCP, 0); + ip_off = (unsigned char *)iph - + (unsigned char *) skb_network_header(skb); + if (ip_off == 8) /* 802.3-SNAP frame */ + ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT; + else if (ip_off != 0) + return -2; + + ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << + TPD_IPHL_SHIFT; + ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & + TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT; + ptpd->word3 |= (skb_shinfo(skb)->gso_size & + TPD_MSS_MASK) << TPD_MSS_SHIFT; + ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; + return 3; + } + } + return 0; +} + +static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, + struct tx_packet_desc *ptpd) +{ + u8 css, cso; + + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + css = skb_checksum_start_offset(skb); + cso = css + (u8) skb->csum_offset; + if (unlikely(css & 0x1)) { + /* L1 hardware requires an even number here */ + if (netif_msg_tx_err(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "payload offset not an even number\n"); + return -1; + } + ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) << + TPD_PLOADOFFSET_SHIFT; + ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) << + TPD_CCSUMOFFSET_SHIFT; + ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT; + return true; + } + return 0; +} + +static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, + struct tx_packet_desc *ptpd) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + u16 buf_len = skb->len; + struct page *page; + unsigned long offset; + unsigned int nr_frags; + unsigned int f; + int retval; + u16 next_to_use; + u16 data_len; + u8 hdr_len; + + buf_len -= skb->data_len; + nr_frags = skb_shinfo(skb)->nr_frags; + next_to_use = atomic_read(&tpd_ring->next_to_use); + buffer_info = &tpd_ring->buffer_info[next_to_use]; + BUG_ON(buffer_info->skb); + /* put skb in last TPD */ + buffer_info->skb = NULL; + + retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK; + if (retval) { + /* TSO */ + hdr_len = skb_tcp_all_headers(skb); + buffer_info->length = hdr_len; + page = virt_to_page(skb->data); + offset = offset_in_page(skb->data); + buffer_info->dma = dma_map_page(&adapter->pdev->dev, page, + offset, hdr_len, + DMA_TO_DEVICE); + + if (++next_to_use == tpd_ring->count) + next_to_use = 0; + + if (buf_len > hdr_len) { + int i, nseg; + + data_len = buf_len - hdr_len; + nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + for (i = 0; i < nseg; i++) { + buffer_info = + &tpd_ring->buffer_info[next_to_use]; + buffer_info->skb = NULL; + buffer_info->length = + (ATL1_MAX_TX_BUF_LEN >= + data_len) ? ATL1_MAX_TX_BUF_LEN : data_len; + data_len -= buffer_info->length; + page = virt_to_page(skb->data + + (hdr_len + i * ATL1_MAX_TX_BUF_LEN)); + offset = offset_in_page(skb->data + + (hdr_len + i * ATL1_MAX_TX_BUF_LEN)); + buffer_info->dma = dma_map_page(&adapter->pdev->dev, + page, offset, + buffer_info->length, + DMA_TO_DEVICE); + if (++next_to_use == tpd_ring->count) + next_to_use = 0; + } + } + } else { + /* not TSO */ + buffer_info->length = buf_len; + page = virt_to_page(skb->data); + offset = offset_in_page(skb->data); + buffer_info->dma = dma_map_page(&adapter->pdev->dev, page, + offset, buf_len, + DMA_TO_DEVICE); + if (++next_to_use == tpd_ring->count) + next_to_use = 0; + } + + for (f = 0; f < nr_frags; f++) { + const skb_frag_t *frag = &skb_shinfo(skb)->frags[f]; + u16 i, nseg; + + buf_len = skb_frag_size(frag); + + nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + for (i = 0; i < nseg; i++) { + buffer_info = &tpd_ring->buffer_info[next_to_use]; + BUG_ON(buffer_info->skb); + + buffer_info->skb = NULL; + buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ? + ATL1_MAX_TX_BUF_LEN : buf_len; + buf_len -= buffer_info->length; + buffer_info->dma = skb_frag_dma_map(&adapter->pdev->dev, + frag, i * ATL1_MAX_TX_BUF_LEN, + buffer_info->length, DMA_TO_DEVICE); + + if (++next_to_use == tpd_ring->count) + next_to_use = 0; + } + } + + /* last tpd's buffer-info */ + buffer_info->skb = skb; +} + +static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count, + struct tx_packet_desc *ptpd) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + struct tx_packet_desc *tpd; + u16 j; + u32 val; + u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use); + + for (j = 0; j < count; j++) { + buffer_info = &tpd_ring->buffer_info[next_to_use]; + tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use); + if (tpd != ptpd) + memcpy(tpd, ptpd, sizeof(struct tx_packet_desc)); + tpd->buffer_addr = cpu_to_le64(buffer_info->dma); + tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT); + tpd->word2 |= (cpu_to_le16(buffer_info->length) & + TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT; + + /* + * if this is the first packet in a TSO chain, set + * TPD_HDRFLAG, otherwise, clear it. + */ + val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & + TPD_SEGMENT_EN_MASK; + if (val) { + if (!j) + tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT; + else + tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT); + } + + if (j == (count - 1)) + tpd->word3 |= 1 << TPD_EOP_SHIFT; + + if (++next_to_use == tpd_ring->count) + next_to_use = 0; + } + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + + atomic_set(&tpd_ring->next_to_use, next_to_use); +} + +static netdev_tx_t atl1_xmit_frame(struct sk_buff *skb, + struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + int len; + int tso; + int count = 1; + int ret_val; + struct tx_packet_desc *ptpd; + u16 vlan_tag; + unsigned int nr_frags = 0; + unsigned int mss = 0; + unsigned int f; + unsigned int proto_hdr_len; + + len = skb_headlen(skb); + + if (unlikely(skb->len <= 0)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + nr_frags = skb_shinfo(skb)->nr_frags; + for (f = 0; f < nr_frags; f++) { + unsigned int f_size = skb_frag_size(&skb_shinfo(skb)->frags[f]); + count += (f_size + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + } + + mss = skb_shinfo(skb)->gso_size; + if (mss) { + if (skb->protocol == htons(ETH_P_IP)) { + proto_hdr_len = skb_tcp_all_headers(skb); + if (unlikely(proto_hdr_len > len)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + /* need additional TPD ? */ + if (proto_hdr_len != len) + count += (len - proto_hdr_len + + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + } + } + + if (atl1_tpd_avail(&adapter->tpd_ring) < count) { + /* not enough descriptors */ + netif_stop_queue(netdev); + if (netif_msg_tx_queued(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "tx busy\n"); + return NETDEV_TX_BUSY; + } + + ptpd = ATL1_TPD_DESC(tpd_ring, + (u16) atomic_read(&tpd_ring->next_to_use)); + memset(ptpd, 0, sizeof(struct tx_packet_desc)); + + if (skb_vlan_tag_present(skb)) { + vlan_tag = skb_vlan_tag_get(skb); + vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | + ((vlan_tag >> 9) & 0x8); + ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; + ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) << + TPD_VLANTAG_SHIFT; + } + + tso = atl1_tso(adapter, skb, ptpd); + if (tso < 0) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (!tso) { + ret_val = atl1_tx_csum(adapter, skb, ptpd); + if (ret_val < 0) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + } + + atl1_tx_map(adapter, skb, ptpd); + atl1_tx_queue(adapter, count, ptpd); + atl1_update_mailbox(adapter); + return NETDEV_TX_OK; +} + +static int atl1_rings_clean(struct napi_struct *napi, int budget) +{ + struct atl1_adapter *adapter = container_of(napi, struct atl1_adapter, napi); + int work_done = atl1_intr_rx(adapter, budget); + + if (atl1_intr_tx(adapter)) + work_done = budget; + + /* Let's come again to process some more packets */ + if (work_done >= budget) + return work_done; + + napi_complete_done(napi, work_done); + /* re-enable Interrupt */ + if (likely(adapter->int_enabled)) + atlx_imr_set(adapter, IMR_NORMAL_MASK); + return work_done; +} + +static inline int atl1_sched_rings_clean(struct atl1_adapter* adapter) +{ + if (!napi_schedule_prep(&adapter->napi)) + /* It is possible in case even the RX/TX ints are disabled via IMR + * register the ISR bits are set anyway (but do not produce IRQ). + * To handle such situation the napi functions used to check is + * something scheduled or not. + */ + return 0; + + __napi_schedule(&adapter->napi); + + /* + * Disable RX/TX ints via IMR register if it is + * allowed. NAPI handler must reenable them in same + * way. + */ + if (!adapter->int_enabled) + return 1; + + atlx_imr_set(adapter, IMR_NORXTX_MASK); + return 1; +} + +/** + * atl1_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + */ +static irqreturn_t atl1_intr(int irq, void *data) +{ + struct atl1_adapter *adapter = netdev_priv(data); + u32 status; + + status = adapter->cmb.cmb->int_stats; + if (!status) + return IRQ_NONE; + + /* clear CMB interrupt status at once, + * but leave rx/tx interrupt status in case it should be dropped + * only if rx/tx processing queued. In other case interrupt + * can be lost. + */ + adapter->cmb.cmb->int_stats = status & (ISR_CMB_TX | ISR_CMB_RX); + + if (status & ISR_GPHY) /* clear phy status */ + atlx_clear_phy_int(adapter); + + /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ + iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR); + + /* check if SMB intr */ + if (status & ISR_SMB) + atl1_inc_smb(adapter); + + /* check if PCIE PHY Link down */ + if (status & ISR_PHY_LINKDOWN) { + if (netif_msg_intr(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "pcie phy link down %x\n", status); + if (netif_running(adapter->netdev)) { /* reset MAC */ + atlx_irq_disable(adapter); + schedule_work(&adapter->reset_dev_task); + return IRQ_HANDLED; + } + } + + /* check if DMA read/write error ? */ + if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { + if (netif_msg_intr(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "pcie DMA r/w error (status = 0x%x)\n", + status); + atlx_irq_disable(adapter); + schedule_work(&adapter->reset_dev_task); + return IRQ_HANDLED; + } + + /* link event */ + if (status & ISR_GPHY) { + adapter->soft_stats.tx_carrier_errors++; + atl1_check_for_link(adapter); + } + + /* transmit or receive event */ + if (status & (ISR_CMB_TX | ISR_CMB_RX) && + atl1_sched_rings_clean(adapter)) + adapter->cmb.cmb->int_stats = adapter->cmb.cmb->int_stats & + ~(ISR_CMB_TX | ISR_CMB_RX); + + /* rx exception */ + if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | + ISR_RRD_OV | ISR_HOST_RFD_UNRUN | + ISR_HOST_RRD_OV))) { + if (netif_msg_intr(adapter)) + dev_printk(KERN_DEBUG, + &adapter->pdev->dev, + "rx exception, ISR = 0x%x\n", + status); + atl1_sched_rings_clean(adapter); + } + + /* re-enable Interrupt */ + iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR); + return IRQ_HANDLED; +} + + +/** + * atl1_phy_config - Timer Call-back + * @t: timer_list containing pointer to netdev cast into an unsigned long + */ +static void atl1_phy_config(struct timer_list *t) +{ + struct atl1_adapter *adapter = from_timer(adapter, t, + phy_config_timer); + struct atl1_hw *hw = &adapter->hw; + unsigned long flags; + + spin_lock_irqsave(&adapter->lock, flags); + adapter->phy_timer_pending = false; + atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); + atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg); + atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN); + spin_unlock_irqrestore(&adapter->lock, flags); +} + +/* + * Orphaned vendor comment left intact here: + * <vendor comment> + * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT + * will assert. We do soft reset <0x1400=1> according + * with the SPEC. BUT, it seemes that PCIE or DMA + * state-machine will not be reset. DMAR_TO_INT will + * assert again and again. + * </vendor comment> + */ + +static int atl1_reset(struct atl1_adapter *adapter) +{ + int ret; + ret = atl1_reset_hw(&adapter->hw); + if (ret) + return ret; + return atl1_init_hw(&adapter->hw); +} + +static s32 atl1_up(struct atl1_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err; + int irq_flags = 0; + + /* hardware has been reset, we need to reload some things */ + atlx_set_multi(netdev); + atl1_init_ring_ptrs(adapter); + atlx_restore_vlan(adapter); + err = atl1_alloc_rx_buffers(adapter); + if (unlikely(!err)) + /* no RX BUFFER allocated */ + return -ENOMEM; + + if (unlikely(atl1_configure(adapter))) { + err = -EIO; + goto err_up; + } + + err = pci_enable_msi(adapter->pdev); + if (err) { + if (netif_msg_ifup(adapter)) + dev_info(&adapter->pdev->dev, + "Unable to enable MSI: %d\n", err); + irq_flags |= IRQF_SHARED; + } + + err = request_irq(adapter->pdev->irq, atl1_intr, irq_flags, + netdev->name, netdev); + if (unlikely(err)) + goto err_up; + + napi_enable(&adapter->napi); + atlx_irq_enable(adapter); + atl1_check_link(adapter); + netif_start_queue(netdev); + return 0; + +err_up: + pci_disable_msi(adapter->pdev); + /* free rx_buffers */ + atl1_clean_rx_ring(adapter); + return err; +} + +static void atl1_down(struct atl1_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + napi_disable(&adapter->napi); + netif_stop_queue(netdev); + del_timer_sync(&adapter->phy_config_timer); + adapter->phy_timer_pending = false; + + atlx_irq_disable(adapter); + free_irq(adapter->pdev->irq, netdev); + pci_disable_msi(adapter->pdev); + atl1_reset_hw(&adapter->hw); + adapter->cmb.cmb->int_stats = 0; + + adapter->link_speed = SPEED_0; + adapter->link_duplex = -1; + netif_carrier_off(netdev); + + atl1_clean_tx_ring(adapter); + atl1_clean_rx_ring(adapter); +} + +static void atl1_reset_dev_task(struct work_struct *work) +{ + struct atl1_adapter *adapter = + container_of(work, struct atl1_adapter, reset_dev_task); + struct net_device *netdev = adapter->netdev; + + netif_device_detach(netdev); + atl1_down(adapter); + atl1_up(adapter); + netif_device_attach(netdev); +} + +/** + * atl1_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int atl1_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + + adapter->hw.max_frame_size = max_frame; + adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; + adapter->rx_buffer_len = (max_frame + 7) & ~7; + adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; + + netdev->mtu = new_mtu; + if (netif_running(netdev)) { + atl1_down(adapter); + atl1_up(adapter); + } + + return 0; +} + +/** + * atl1_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + */ +static int atl1_open(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int err; + + netif_carrier_off(netdev); + + /* allocate transmit descriptors */ + err = atl1_setup_ring_resources(adapter); + if (err) + return err; + + err = atl1_up(adapter); + if (err) + goto err_up; + + return 0; + +err_up: + atl1_reset(adapter); + return err; +} + +/** + * atl1_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + */ +static int atl1_close(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + atl1_down(adapter); + atl1_free_ring_resources(adapter); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int atl1_suspend(struct device *dev) +{ + struct net_device *netdev = dev_get_drvdata(dev); + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + u32 ctrl = 0; + u32 wufc = adapter->wol; + u32 val; + u16 speed; + u16 duplex; + + netif_device_detach(netdev); + if (netif_running(netdev)) + atl1_down(adapter); + + atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); + atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); + val = ctrl & BMSR_LSTATUS; + if (val) + wufc &= ~ATLX_WUFC_LNKC; + if (!wufc) + goto disable_wol; + + if (val) { + val = atl1_get_speed_and_duplex(hw, &speed, &duplex); + if (val) { + if (netif_msg_ifdown(adapter)) + dev_printk(KERN_DEBUG, dev, + "error getting speed/duplex\n"); + goto disable_wol; + } + + ctrl = 0; + + /* enable magic packet WOL */ + if (wufc & ATLX_WUFC_MAG) + ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN); + iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); + ioread32(hw->hw_addr + REG_WOL_CTRL); + + /* configure the mac */ + ctrl = MAC_CTRL_RX_EN; + ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 : + MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT); + if (duplex == FULL_DUPLEX) + ctrl |= MAC_CTRL_DUPLX; + ctrl |= (((u32)adapter->hw.preamble_len & + MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); + __atlx_vlan_mode(netdev->features, &ctrl); + if (wufc & ATLX_WUFC_MAG) + ctrl |= MAC_CTRL_BC_EN; + iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); + ioread32(hw->hw_addr + REG_MAC_CTRL); + + /* poke the PHY */ + ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); + ioread32(hw->hw_addr + REG_PCIE_PHYMISC); + } else { + ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); + iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); + ioread32(hw->hw_addr + REG_WOL_CTRL); + iowrite32(0, hw->hw_addr + REG_MAC_CTRL); + ioread32(hw->hw_addr + REG_MAC_CTRL); + hw->phy_configured = false; + } + + return 0; + + disable_wol: + iowrite32(0, hw->hw_addr + REG_WOL_CTRL); + ioread32(hw->hw_addr + REG_WOL_CTRL); + ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); + ioread32(hw->hw_addr + REG_PCIE_PHYMISC); + hw->phy_configured = false; + + return 0; +} + +static int atl1_resume(struct device *dev) +{ + struct net_device *netdev = dev_get_drvdata(dev); + struct atl1_adapter *adapter = netdev_priv(netdev); + + iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); + + atl1_reset_hw(&adapter->hw); + + if (netif_running(netdev)) { + adapter->cmb.cmb->int_stats = 0; + atl1_up(adapter); + } + netif_device_attach(netdev); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(atl1_pm_ops, atl1_suspend, atl1_resume); + +static void atl1_shutdown(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1_adapter *adapter = netdev_priv(netdev); + +#ifdef CONFIG_PM_SLEEP + atl1_suspend(&pdev->dev); +#endif + pci_wake_from_d3(pdev, adapter->wol); + pci_set_power_state(pdev, PCI_D3hot); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void atl1_poll_controller(struct net_device *netdev) +{ + disable_irq(netdev->irq); + atl1_intr(netdev->irq, netdev); + enable_irq(netdev->irq); +} +#endif + +static const struct net_device_ops atl1_netdev_ops = { + .ndo_open = atl1_open, + .ndo_stop = atl1_close, + .ndo_start_xmit = atl1_xmit_frame, + .ndo_set_rx_mode = atlx_set_multi, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = atl1_set_mac, + .ndo_change_mtu = atl1_change_mtu, + .ndo_fix_features = atlx_fix_features, + .ndo_set_features = atlx_set_features, + .ndo_eth_ioctl = atlx_ioctl, + .ndo_tx_timeout = atlx_tx_timeout, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = atl1_poll_controller, +#endif +}; + +/** + * atl1_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in atl1_pci_tbl + * + * Returns 0 on success, negative on failure + * + * atl1_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + */ +static int atl1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct atl1_adapter *adapter; + static int cards_found = 0; + int err; + + err = pci_enable_device(pdev); + if (err) + return err; + + /* + * The atl1 chip can DMA to 64-bit addresses, but it uses a single + * shared register for the high 32 bits, so only a single, aligned, + * 4 GB physical address range can be used at a time. + * + * Supporting 64-bit DMA on this hardware is more trouble than it's + * worth. It is far easier to limit to 32-bit DMA than update + * various kernel subsystems to support the mechanics required by a + * fixed-high-32-bit system. + */ + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, "no usable DMA configuration\n"); + goto err_dma; + } + /* + * Mark all PCI regions associated with PCI device + * pdev as being reserved by owner atl1_driver_name + */ + err = pci_request_regions(pdev, ATLX_DRIVER_NAME); + if (err) + goto err_request_regions; + + /* + * Enables bus-mastering on the device and calls + * pcibios_set_master to do the needed arch specific settings + */ + pci_set_master(pdev); + + netdev = alloc_etherdev(sizeof(struct atl1_adapter)); + if (!netdev) { + err = -ENOMEM; + goto err_alloc_etherdev; + } + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->hw.back = adapter; + adapter->msg_enable = netif_msg_init(debug, atl1_default_msg); + + adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); + if (!adapter->hw.hw_addr) { + err = -EIO; + goto err_pci_iomap; + } + /* get device revision number */ + adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + + (REG_MASTER_CTRL + 2)); + + /* set default ring resource counts */ + adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; + adapter->tpd_ring.count = ATL1_DEFAULT_TPD; + + adapter->mii.dev = netdev; + adapter->mii.mdio_read = mdio_read; + adapter->mii.mdio_write = mdio_write; + adapter->mii.phy_id_mask = 0x1f; + adapter->mii.reg_num_mask = 0x1f; + + netdev->netdev_ops = &atl1_netdev_ops; + netdev->watchdog_timeo = 5 * HZ; + netif_napi_add(netdev, &adapter->napi, atl1_rings_clean); + + netdev->ethtool_ops = &atl1_ethtool_ops; + adapter->bd_number = cards_found; + + /* setup the private structure */ + err = atl1_sw_init(adapter); + if (err) + goto err_common; + + netdev->features = NETIF_F_HW_CSUM; + netdev->features |= NETIF_F_SG; + netdev->features |= (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX); + + netdev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_TSO | + NETIF_F_HW_VLAN_CTAG_RX; + + /* is this valid? see atl1_setup_mac_ctrl() */ + netdev->features |= NETIF_F_RXCSUM; + + /* MTU range: 42 - 10218 */ + netdev->min_mtu = ETH_ZLEN - (ETH_HLEN + VLAN_HLEN); + netdev->max_mtu = MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + + /* + * patch for some L1 of old version, + * the final version of L1 may not need these + * patches + */ + /* atl1_pcie_patch(adapter); */ + + /* really reset GPHY core */ + iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); + + /* + * reset the controller to + * put the device in a known good starting state + */ + if (atl1_reset_hw(&adapter->hw)) { + err = -EIO; + goto err_common; + } + + /* copy the MAC address out of the EEPROM */ + if (atl1_read_mac_addr(&adapter->hw)) { + /* mark random mac */ + netdev->addr_assign_type = NET_ADDR_RANDOM; + } + eth_hw_addr_set(netdev, adapter->hw.mac_addr); + + if (!is_valid_ether_addr(netdev->dev_addr)) { + err = -EIO; + goto err_common; + } + + atl1_check_options(adapter); + + /* pre-init the MAC, and setup link */ + err = atl1_init_hw(&adapter->hw); + if (err) { + err = -EIO; + goto err_common; + } + + atl1_pcie_patch(adapter); + /* assume we have no link for now */ + netif_carrier_off(netdev); + + timer_setup(&adapter->phy_config_timer, atl1_phy_config, 0); + adapter->phy_timer_pending = false; + + INIT_WORK(&adapter->reset_dev_task, atl1_reset_dev_task); + + INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task); + + err = register_netdev(netdev); + if (err) + goto err_common; + + cards_found++; + atl1_via_workaround(adapter); + return 0; + +err_common: + pci_iounmap(pdev, adapter->hw.hw_addr); +err_pci_iomap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_dma: +err_request_regions: + pci_disable_device(pdev); + return err; +} + +/** + * atl1_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * atl1_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + */ +static void atl1_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1_adapter *adapter; + /* Device not available. Return. */ + if (!netdev) + return; + + adapter = netdev_priv(netdev); + + /* + * Some atl1 boards lack persistent storage for their MAC, and get it + * from the BIOS during POST. If we've been messing with the MAC + * address, we need to save the permanent one. + */ + if (!ether_addr_equal_unaligned(adapter->hw.mac_addr, + adapter->hw.perm_mac_addr)) { + memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, + ETH_ALEN); + atl1_set_mac_addr(&adapter->hw); + } + + iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); + unregister_netdev(netdev); + pci_iounmap(pdev, adapter->hw.hw_addr); + pci_release_regions(pdev); + free_netdev(netdev); + pci_disable_device(pdev); +} + +static struct pci_driver atl1_driver = { + .name = ATLX_DRIVER_NAME, + .id_table = atl1_pci_tbl, + .probe = atl1_probe, + .remove = atl1_remove, + .shutdown = atl1_shutdown, + .driver.pm = &atl1_pm_ops, +}; + +struct atl1_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define ATL1_STAT(m) \ + sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m) + +static struct atl1_stats atl1_gstrings_stats[] = { + {"rx_packets", ATL1_STAT(soft_stats.rx_packets)}, + {"tx_packets", ATL1_STAT(soft_stats.tx_packets)}, + {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)}, + {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)}, + {"rx_errors", ATL1_STAT(soft_stats.rx_errors)}, + {"tx_errors", ATL1_STAT(soft_stats.tx_errors)}, + {"multicast", ATL1_STAT(soft_stats.multicast)}, + {"collisions", ATL1_STAT(soft_stats.collisions)}, + {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)}, + {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, + {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)}, + {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)}, + {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)}, + {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, + {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)}, + {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)}, + {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)}, + {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)}, + {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)}, + {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)}, + {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)}, + {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)}, + {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)}, + {"tx_underrun", ATL1_STAT(soft_stats.tx_underrun)}, + {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)}, + {"tx_pause", ATL1_STAT(soft_stats.tx_pause)}, + {"rx_pause", ATL1_STAT(soft_stats.rx_pause)}, + {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)}, + {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)} +}; + +static void atl1_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int i; + char *p; + + for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { + p = (char *)adapter+atl1_gstrings_stats[i].stat_offset; + data[i] = (atl1_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + +} + +static int atl1_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(atl1_gstrings_stats); + default: + return -EOPNOTSUPP; + } +} + +static int atl1_get_link_ksettings(struct net_device *netdev, + struct ethtool_link_ksettings *cmd) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + u32 supported, advertising; + + supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | SUPPORTED_TP); + advertising = ADVERTISED_TP; + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + advertising |= ADVERTISED_Autoneg; + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) { + advertising |= ADVERTISED_Autoneg; + advertising |= + (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full); + } else + advertising |= (ADVERTISED_1000baseT_Full); + } + cmd->base.port = PORT_TP; + cmd->base.phy_address = 0; + + if (netif_carrier_ok(adapter->netdev)) { + u16 link_speed, link_duplex; + atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex); + cmd->base.speed = link_speed; + if (link_duplex == FULL_DUPLEX) + cmd->base.duplex = DUPLEX_FULL; + else + cmd->base.duplex = DUPLEX_HALF; + } else { + cmd->base.speed = SPEED_UNKNOWN; + cmd->base.duplex = DUPLEX_UNKNOWN; + } + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + cmd->base.autoneg = AUTONEG_ENABLE; + else + cmd->base.autoneg = AUTONEG_DISABLE; + + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, + supported); + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, + advertising); + + return 0; +} + +static int atl1_set_link_ksettings(struct net_device *netdev, + const struct ethtool_link_ksettings *cmd) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + u16 phy_data; + int ret_val = 0; + u16 old_media_type = hw->media_type; + + if (netif_running(adapter->netdev)) { + if (netif_msg_link(adapter)) + dev_dbg(&adapter->pdev->dev, + "ethtool shutting down adapter\n"); + atl1_down(adapter); + } + + if (cmd->base.autoneg == AUTONEG_ENABLE) + hw->media_type = MEDIA_TYPE_AUTO_SENSOR; + else { + u32 speed = cmd->base.speed; + if (speed == SPEED_1000) { + if (cmd->base.duplex != DUPLEX_FULL) { + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, + "1000M half is invalid\n"); + ret_val = -EINVAL; + goto exit_sset; + } + hw->media_type = MEDIA_TYPE_1000M_FULL; + } else if (speed == SPEED_100) { + if (cmd->base.duplex == DUPLEX_FULL) + hw->media_type = MEDIA_TYPE_100M_FULL; + else + hw->media_type = MEDIA_TYPE_100M_HALF; + } else { + if (cmd->base.duplex == DUPLEX_FULL) + hw->media_type = MEDIA_TYPE_10M_FULL; + else + hw->media_type = MEDIA_TYPE_10M_HALF; + } + } + + if (atl1_phy_setup_autoneg_adv(hw)) { + ret_val = -EINVAL; + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, + "invalid ethtool speed/duplex setting\n"); + goto exit_sset; + } + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; + } + } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); +exit_sset: + if (ret_val) + hw->media_type = old_media_type; + + if (netif_running(adapter->netdev)) { + if (netif_msg_link(adapter)) + dev_dbg(&adapter->pdev->dev, + "ethtool starting adapter\n"); + atl1_up(adapter); + } else if (!ret_val) { + if (netif_msg_link(adapter)) + dev_dbg(&adapter->pdev->dev, + "ethtool resetting adapter\n"); + atl1_reset(adapter); + } + return ret_val; +} + +static void atl1_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + strscpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver)); + strscpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); +} + +static void atl1_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_MAGIC; + wol->wolopts = 0; + if (adapter->wol & ATLX_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; +} + +static int atl1_set_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | + WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + adapter->wol = 0; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= ATLX_WUFC_MAG; + + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + return 0; +} + +static u32 atl1_get_msglevel(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void atl1_set_msglevel(struct net_device *netdev, u32 value) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = value; +} + +static int atl1_get_regs_len(struct net_device *netdev) +{ + return ATL1_REG_COUNT * sizeof(u32); +} + +static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs, + void *p) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + unsigned int i; + u32 *regbuf = p; + + for (i = 0; i < ATL1_REG_COUNT; i++) { + /* + * This switch statement avoids reserved regions + * of register space. + */ + switch (i) { + case 6 ... 9: + case 14: + case 29 ... 31: + case 34 ... 63: + case 75 ... 127: + case 136 ... 1023: + case 1027 ... 1087: + case 1091 ... 1151: + case 1194 ... 1195: + case 1200 ... 1201: + case 1206 ... 1213: + case 1216 ... 1279: + case 1290 ... 1311: + case 1323 ... 1343: + case 1358 ... 1359: + case 1368 ... 1375: + case 1378 ... 1383: + case 1388 ... 1391: + case 1393 ... 1395: + case 1402 ... 1403: + case 1410 ... 1471: + case 1522 ... 1535: + /* reserved region; don't read it */ + regbuf[i] = 0; + break; + default: + /* unreserved region */ + regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32))); + } + } +} + +static void atl1_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring, + struct kernel_ethtool_ringparam *kernel_ring, + struct netlink_ext_ack *extack) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_tpd_ring *txdr = &adapter->tpd_ring; + struct atl1_rfd_ring *rxdr = &adapter->rfd_ring; + + ring->rx_max_pending = ATL1_MAX_RFD; + ring->tx_max_pending = ATL1_MAX_TPD; + ring->rx_pending = rxdr->count; + ring->tx_pending = txdr->count; +} + +static int atl1_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring, + struct kernel_ethtool_ringparam *kernel_ring, + struct netlink_ext_ack *extack) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_tpd_ring *tpdr = &adapter->tpd_ring; + struct atl1_rrd_ring *rrdr = &adapter->rrd_ring; + struct atl1_rfd_ring *rfdr = &adapter->rfd_ring; + + struct atl1_tpd_ring tpd_old, tpd_new; + struct atl1_rfd_ring rfd_old, rfd_new; + struct atl1_rrd_ring rrd_old, rrd_new; + struct atl1_ring_header rhdr_old, rhdr_new; + struct atl1_smb smb; + struct atl1_cmb cmb; + int err; + + tpd_old = adapter->tpd_ring; + rfd_old = adapter->rfd_ring; + rrd_old = adapter->rrd_ring; + rhdr_old = adapter->ring_header; + + if (netif_running(adapter->netdev)) + atl1_down(adapter); + + rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD); + rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD : + rfdr->count; + rfdr->count = (rfdr->count + 3) & ~3; + rrdr->count = rfdr->count; + + tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD); + tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD : + tpdr->count; + tpdr->count = (tpdr->count + 3) & ~3; + + if (netif_running(adapter->netdev)) { + /* try to get new resources before deleting old */ + err = atl1_setup_ring_resources(adapter); + if (err) + goto err_setup_ring; + + /* + * save the new, restore the old in order to free it, + * then restore the new back again + */ + + rfd_new = adapter->rfd_ring; + rrd_new = adapter->rrd_ring; + tpd_new = adapter->tpd_ring; + rhdr_new = adapter->ring_header; + adapter->rfd_ring = rfd_old; + adapter->rrd_ring = rrd_old; + adapter->tpd_ring = tpd_old; + adapter->ring_header = rhdr_old; + /* + * Save SMB and CMB, since atl1_free_ring_resources + * will clear them. + */ + smb = adapter->smb; + cmb = adapter->cmb; + atl1_free_ring_resources(adapter); + adapter->rfd_ring = rfd_new; + adapter->rrd_ring = rrd_new; + adapter->tpd_ring = tpd_new; + adapter->ring_header = rhdr_new; + adapter->smb = smb; + adapter->cmb = cmb; + + err = atl1_up(adapter); + if (err) + return err; + } + return 0; + +err_setup_ring: + adapter->rfd_ring = rfd_old; + adapter->rrd_ring = rrd_old; + adapter->tpd_ring = tpd_old; + adapter->ring_header = rhdr_old; + atl1_up(adapter); + return err; +} + +static void atl1_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *epause) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + epause->autoneg = AUTONEG_ENABLE; + } else { + epause->autoneg = AUTONEG_DISABLE; + } + epause->rx_pause = 1; + epause->tx_pause = 1; +} + +static int atl1_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *epause) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + epause->autoneg = AUTONEG_ENABLE; + } else { + epause->autoneg = AUTONEG_DISABLE; + } + + epause->rx_pause = 1; + epause->tx_pause = 1; + + return 0; +} + +static void atl1_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { + memcpy(p, atl1_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + } +} + +static int atl1_nway_reset(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + if (netif_running(netdev)) { + u16 phy_data; + atl1_down(adapter); + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + } else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = MII_CR_FULL_DUPLEX | + MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = MII_CR_FULL_DUPLEX | + MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + } + } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); + atl1_up(adapter); + } + return 0; +} + +static const struct ethtool_ops atl1_ethtool_ops = { + .get_drvinfo = atl1_get_drvinfo, + .get_wol = atl1_get_wol, + .set_wol = atl1_set_wol, + .get_msglevel = atl1_get_msglevel, + .set_msglevel = atl1_set_msglevel, + .get_regs_len = atl1_get_regs_len, + .get_regs = atl1_get_regs, + .get_ringparam = atl1_get_ringparam, + .set_ringparam = atl1_set_ringparam, + .get_pauseparam = atl1_get_pauseparam, + .set_pauseparam = atl1_set_pauseparam, + .get_link = ethtool_op_get_link, + .get_strings = atl1_get_strings, + .nway_reset = atl1_nway_reset, + .get_ethtool_stats = atl1_get_ethtool_stats, + .get_sset_count = atl1_get_sset_count, + .get_link_ksettings = atl1_get_link_ksettings, + .set_link_ksettings = atl1_set_link_ksettings, +}; + +module_pci_driver(atl1_driver); |