summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x.h')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x.h2536
1 files changed, 2536 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
new file mode 100644
index 000000000..dd5945c4b
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -0,0 +1,2536 @@
+/* bnx2x.h: QLogic Everest network driver.
+ *
+ * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
+ * Written by: Eliezer Tamir
+ * Based on code from Michael Chan's bnx2 driver
+ */
+
+#ifndef BNX2X_H
+#define BNX2X_H
+
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
+#include <linux/types.h>
+#include <linux/pci_regs.h>
+
+#include <linux/ptp_clock_kernel.h>
+#include <linux/net_tstamp.h>
+#include <linux/timecounter.h>
+
+/* compilation time flags */
+
+/* define this to make the driver freeze on error to allow getting debug info
+ * (you will need to reboot afterwards) */
+/* #define BNX2X_STOP_ON_ERROR */
+
+/* FIXME: Delete the DRV_MODULE_VERSION below, but please be warned
+ * that it is not an easy task because such change has all chances
+ * to break this driver due to amount of abuse of in-kernel interfaces
+ * between modules and FW.
+ *
+ * DO NOT UPDATE DRV_MODULE_VERSION below.
+ */
+#define DRV_MODULE_VERSION "1.713.36-0"
+#define BNX2X_BC_VER 0x040200
+
+#if defined(CONFIG_DCB)
+#define BCM_DCBNL
+#endif
+
+#include "bnx2x_hsi.h"
+
+#include "../cnic_if.h"
+
+#define BNX2X_MIN_MSIX_VEC_CNT(bp) ((bp)->min_msix_vec_cnt)
+
+#include <linux/mdio.h>
+
+#include "bnx2x_reg.h"
+#include "bnx2x_fw_defs.h"
+#include "bnx2x_mfw_req.h"
+#include "bnx2x_link.h"
+#include "bnx2x_sp.h"
+#include "bnx2x_dcb.h"
+#include "bnx2x_stats.h"
+#include "bnx2x_vfpf.h"
+
+enum bnx2x_int_mode {
+ BNX2X_INT_MODE_MSIX,
+ BNX2X_INT_MODE_INTX,
+ BNX2X_INT_MODE_MSI
+};
+
+/* error/debug prints */
+
+#define DRV_MODULE_NAME "bnx2x"
+
+/* for messages that are currently off */
+#define BNX2X_MSG_OFF 0x0
+#define BNX2X_MSG_MCP 0x0010000 /* was: NETIF_MSG_HW */
+#define BNX2X_MSG_STATS 0x0020000 /* was: NETIF_MSG_TIMER */
+#define BNX2X_MSG_NVM 0x0040000 /* was: NETIF_MSG_HW */
+#define BNX2X_MSG_DMAE 0x0080000 /* was: NETIF_MSG_HW */
+#define BNX2X_MSG_SP 0x0100000 /* was: NETIF_MSG_INTR */
+#define BNX2X_MSG_FP 0x0200000 /* was: NETIF_MSG_INTR */
+#define BNX2X_MSG_IOV 0x0800000
+#define BNX2X_MSG_PTP 0x1000000
+#define BNX2X_MSG_IDLE 0x2000000 /* used for idle check*/
+#define BNX2X_MSG_ETHTOOL 0x4000000
+#define BNX2X_MSG_DCB 0x8000000
+
+/* regular debug print */
+#define DP_INNER(fmt, ...) \
+ pr_notice("[%s:%d(%s)]" fmt, \
+ __func__, __LINE__, \
+ bp->dev ? (bp->dev->name) : "?", \
+ ##__VA_ARGS__);
+
+#define DP(__mask, fmt, ...) \
+do { \
+ if (unlikely(bp->msg_enable & (__mask))) \
+ DP_INNER(fmt, ##__VA_ARGS__); \
+} while (0)
+
+#define DP_AND(__mask, fmt, ...) \
+do { \
+ if (unlikely((bp->msg_enable & (__mask)) == __mask)) \
+ DP_INNER(fmt, ##__VA_ARGS__); \
+} while (0)
+
+#define DP_CONT(__mask, fmt, ...) \
+do { \
+ if (unlikely(bp->msg_enable & (__mask))) \
+ pr_cont(fmt, ##__VA_ARGS__); \
+} while (0)
+
+/* errors debug print */
+#define BNX2X_DBG_ERR(fmt, ...) \
+do { \
+ if (unlikely(netif_msg_probe(bp))) \
+ pr_err("[%s:%d(%s)]" fmt, \
+ __func__, __LINE__, \
+ bp->dev ? (bp->dev->name) : "?", \
+ ##__VA_ARGS__); \
+} while (0)
+
+/* for errors (never masked) */
+#define BNX2X_ERR(fmt, ...) \
+do { \
+ pr_err("[%s:%d(%s)]" fmt, \
+ __func__, __LINE__, \
+ bp->dev ? (bp->dev->name) : "?", \
+ ##__VA_ARGS__); \
+} while (0)
+
+#define BNX2X_ERROR(fmt, ...) \
+ pr_err("[%s:%d]" fmt, __func__, __LINE__, ##__VA_ARGS__)
+
+/* before we have a dev->name use dev_info() */
+#define BNX2X_DEV_INFO(fmt, ...) \
+do { \
+ if (unlikely(netif_msg_probe(bp))) \
+ dev_info(&bp->pdev->dev, fmt, ##__VA_ARGS__); \
+} while (0)
+
+/* Error handling */
+void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int);
+#ifdef BNX2X_STOP_ON_ERROR
+#define bnx2x_panic() \
+do { \
+ bp->panic = 1; \
+ BNX2X_ERR("driver assert\n"); \
+ bnx2x_panic_dump(bp, true); \
+} while (0)
+#else
+#define bnx2x_panic() \
+do { \
+ bp->panic = 1; \
+ BNX2X_ERR("driver assert\n"); \
+ bnx2x_panic_dump(bp, false); \
+} while (0)
+#endif
+
+#define bnx2x_mc_addr(ha) ((ha)->addr)
+#define bnx2x_uc_addr(ha) ((ha)->addr)
+
+#define U64_LO(x) ((u32)(((u64)(x)) & 0xffffffff))
+#define U64_HI(x) ((u32)(((u64)(x)) >> 32))
+#define HILO_U64(hi, lo) ((((u64)(hi)) << 32) + (lo))
+
+#define REG_ADDR(bp, offset) ((bp->regview) + (offset))
+
+#define REG_RD(bp, offset) readl(REG_ADDR(bp, offset))
+#define REG_RD8(bp, offset) readb(REG_ADDR(bp, offset))
+#define REG_RD16(bp, offset) readw(REG_ADDR(bp, offset))
+
+#define REG_WR_RELAXED(bp, offset, val) \
+ writel_relaxed((u32)val, REG_ADDR(bp, offset))
+
+#define REG_WR16_RELAXED(bp, offset, val) \
+ writew_relaxed((u16)val, REG_ADDR(bp, offset))
+
+#define REG_WR(bp, offset, val) writel((u32)val, REG_ADDR(bp, offset))
+#define REG_WR8(bp, offset, val) writeb((u8)val, REG_ADDR(bp, offset))
+#define REG_WR16(bp, offset, val) writew((u16)val, REG_ADDR(bp, offset))
+
+#define REG_RD_IND(bp, offset) bnx2x_reg_rd_ind(bp, offset)
+#define REG_WR_IND(bp, offset, val) bnx2x_reg_wr_ind(bp, offset, val)
+
+#define REG_RD_DMAE(bp, offset, valp, len32) \
+ do { \
+ bnx2x_read_dmae(bp, offset, len32);\
+ memcpy(valp, bnx2x_sp(bp, wb_data[0]), (len32) * 4); \
+ } while (0)
+
+#define REG_WR_DMAE(bp, offset, valp, len32) \
+ do { \
+ memcpy(bnx2x_sp(bp, wb_data[0]), valp, (len32) * 4); \
+ bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), \
+ offset, len32); \
+ } while (0)
+
+#define REG_WR_DMAE_LEN(bp, offset, valp, len32) \
+ REG_WR_DMAE(bp, offset, valp, len32)
+
+#define VIRT_WR_DMAE_LEN(bp, data, addr, len32, le32_swap) \
+ do { \
+ memcpy(GUNZIP_BUF(bp), data, (len32) * 4); \
+ bnx2x_write_big_buf_wb(bp, addr, len32); \
+ } while (0)
+
+#define SHMEM_ADDR(bp, field) (bp->common.shmem_base + \
+ offsetof(struct shmem_region, field))
+#define SHMEM_RD(bp, field) REG_RD(bp, SHMEM_ADDR(bp, field))
+#define SHMEM_WR(bp, field, val) REG_WR(bp, SHMEM_ADDR(bp, field), val)
+
+#define SHMEM2_ADDR(bp, field) (bp->common.shmem2_base + \
+ offsetof(struct shmem2_region, field))
+#define SHMEM2_RD(bp, field) REG_RD(bp, SHMEM2_ADDR(bp, field))
+#define SHMEM2_WR(bp, field, val) REG_WR(bp, SHMEM2_ADDR(bp, field), val)
+#define MF_CFG_ADDR(bp, field) (bp->common.mf_cfg_base + \
+ offsetof(struct mf_cfg, field))
+#define MF2_CFG_ADDR(bp, field) (bp->common.mf2_cfg_base + \
+ offsetof(struct mf2_cfg, field))
+
+#define MF_CFG_RD(bp, field) REG_RD(bp, MF_CFG_ADDR(bp, field))
+#define MF_CFG_WR(bp, field, val) REG_WR(bp,\
+ MF_CFG_ADDR(bp, field), (val))
+#define MF2_CFG_RD(bp, field) REG_RD(bp, MF2_CFG_ADDR(bp, field))
+
+#define SHMEM2_HAS(bp, field) ((bp)->common.shmem2_base && \
+ (SHMEM2_RD((bp), size) > \
+ offsetof(struct shmem2_region, field)))
+
+#define EMAC_RD(bp, reg) REG_RD(bp, emac_base + reg)
+#define EMAC_WR(bp, reg, val) REG_WR(bp, emac_base + reg, val)
+
+/* SP SB indices */
+
+/* General SP events - stats query, cfc delete, etc */
+#define HC_SP_INDEX_ETH_DEF_CONS 3
+
+/* EQ completions */
+#define HC_SP_INDEX_EQ_CONS 7
+
+/* FCoE L2 connection completions */
+#define HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS 6
+#define HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS 4
+/* iSCSI L2 */
+#define HC_SP_INDEX_ETH_ISCSI_CQ_CONS 5
+#define HC_SP_INDEX_ETH_ISCSI_RX_CQ_CONS 1
+
+/* Special clients parameters */
+
+/* SB indices */
+/* FCoE L2 */
+#define BNX2X_FCOE_L2_RX_INDEX \
+ (&bp->def_status_blk->sp_sb.\
+ index_values[HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS])
+
+#define BNX2X_FCOE_L2_TX_INDEX \
+ (&bp->def_status_blk->sp_sb.\
+ index_values[HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS])
+
+/**
+ * CIDs and CLIDs:
+ * CLIDs below is a CLID for func 0, then the CLID for other
+ * functions will be calculated by the formula:
+ *
+ * FUNC_N_CLID_X = N * NUM_SPECIAL_CLIENTS + FUNC_0_CLID_X
+ *
+ */
+enum {
+ BNX2X_ISCSI_ETH_CL_ID_IDX,
+ BNX2X_FCOE_ETH_CL_ID_IDX,
+ BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
+};
+
+/* use a value high enough to be above all the PFs, which has least significant
+ * nibble as 8, so when cnic needs to come up with a CID for UIO to use to
+ * calculate doorbell address according to old doorbell configuration scheme
+ * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number
+ * We must avoid coming up with cid 8 for iscsi since according to this method
+ * the designated UIO cid will come out 0 and it has a special handling for that
+ * case which doesn't suit us. Therefore will will cieling to closes cid which
+ * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18.
+ */
+
+#define BNX2X_1st_NON_L2_ETH_CID(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) * \
+ (bp)->max_cos)
+/* amount of cids traversed by UIO's DPM addition to doorbell */
+#define UIO_DPM 8
+/* roundup to DPM offset */
+#define UIO_ROUNDUP(bp) (roundup(BNX2X_1st_NON_L2_ETH_CID(bp), \
+ UIO_DPM))
+/* offset to nearest value which has lsb nibble matching DPM */
+#define UIO_CID_OFFSET(bp) ((UIO_ROUNDUP(bp) + UIO_DPM) % \
+ (UIO_DPM * 2))
+/* add offset to rounded-up cid to get a value which could be used with UIO */
+#define UIO_DPM_ALIGN(bp) (UIO_ROUNDUP(bp) + UIO_CID_OFFSET(bp))
+/* but wait - avoid UIO special case for cid 0 */
+#define UIO_DPM_CID0_OFFSET(bp) ((UIO_DPM * 2) * \
+ (UIO_DPM_ALIGN(bp) == UIO_DPM))
+/* Properly DPM aligned CID dajusted to cid 0 secal case */
+#define BNX2X_CNIC_START_ETH_CID(bp) (UIO_DPM_ALIGN(bp) + \
+ (UIO_DPM_CID0_OFFSET(bp)))
+/* how many cids were wasted - need this value for cid allocation */
+#define UIO_CID_PAD(bp) (BNX2X_CNIC_START_ETH_CID(bp) - \
+ BNX2X_1st_NON_L2_ETH_CID(bp))
+ /* iSCSI L2 */
+#define BNX2X_ISCSI_ETH_CID(bp) (BNX2X_CNIC_START_ETH_CID(bp))
+ /* FCoE L2 */
+#define BNX2X_FCOE_ETH_CID(bp) (BNX2X_CNIC_START_ETH_CID(bp) + 1)
+
+#define CNIC_SUPPORT(bp) ((bp)->cnic_support)
+#define CNIC_ENABLED(bp) ((bp)->cnic_enabled)
+#define CNIC_LOADED(bp) ((bp)->cnic_loaded)
+#define FCOE_INIT(bp) ((bp)->fcoe_init)
+
+#define AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR \
+ AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR
+
+#define SM_RX_ID 0
+#define SM_TX_ID 1
+
+/* defines for multiple tx priority indices */
+#define FIRST_TX_ONLY_COS_INDEX 1
+#define FIRST_TX_COS_INDEX 0
+
+/* rules for calculating the cids of tx-only connections */
+#define CID_TO_FP(cid, bp) ((cid) % BNX2X_NUM_NON_CNIC_QUEUES(bp))
+#define CID_COS_TO_TX_ONLY_CID(cid, cos, bp) \
+ (cid + cos * BNX2X_NUM_NON_CNIC_QUEUES(bp))
+
+/* fp index inside class of service range */
+#define FP_COS_TO_TXQ(fp, cos, bp) \
+ ((fp)->index + cos * BNX2X_NUM_NON_CNIC_QUEUES(bp))
+
+/* Indexes for transmission queues array:
+ * txdata for RSS i CoS j is at location i + (j * num of RSS)
+ * txdata for FCoE (if exist) is at location max cos * num of RSS
+ * txdata for FWD (if exist) is one location after FCoE
+ * txdata for OOO (if exist) is one location after FWD
+ */
+enum {
+ FCOE_TXQ_IDX_OFFSET,
+ FWD_TXQ_IDX_OFFSET,
+ OOO_TXQ_IDX_OFFSET,
+};
+#define MAX_ETH_TXQ_IDX(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) * (bp)->max_cos)
+#define FCOE_TXQ_IDX(bp) (MAX_ETH_TXQ_IDX(bp) + FCOE_TXQ_IDX_OFFSET)
+
+/* fast path */
+/*
+ * This driver uses new build_skb() API :
+ * RX ring buffer contains pointer to kmalloc() data only,
+ * skb are built only after Hardware filled the frame.
+ */
+struct sw_rx_bd {
+ u8 *data;
+ DEFINE_DMA_UNMAP_ADDR(mapping);
+};
+
+struct sw_tx_bd {
+ struct sk_buff *skb;
+ u16 first_bd;
+ u8 flags;
+/* Set on the first BD descriptor when there is a split BD */
+#define BNX2X_TSO_SPLIT_BD (1<<0)
+#define BNX2X_HAS_SECOND_PBD (1<<1)
+};
+
+struct sw_rx_page {
+ struct page *page;
+ DEFINE_DMA_UNMAP_ADDR(mapping);
+ unsigned int offset;
+};
+
+union db_prod {
+ struct doorbell_set_prod data;
+ u32 raw;
+};
+
+/* dropless fc FW/HW related params */
+#define BRB_SIZE(bp) (CHIP_IS_E3(bp) ? 1024 : 512)
+#define MAX_AGG_QS(bp) (CHIP_IS_E1(bp) ? \
+ ETH_MAX_AGGREGATION_QUEUES_E1 :\
+ ETH_MAX_AGGREGATION_QUEUES_E1H_E2)
+#define FW_DROP_LEVEL(bp) (3 + MAX_SPQ_PENDING + MAX_AGG_QS(bp))
+#define FW_PREFETCH_CNT 16
+#define DROPLESS_FC_HEADROOM 100
+
+/* MC hsi */
+#define BCM_PAGE_SHIFT 12
+#define BCM_PAGE_SIZE (1 << BCM_PAGE_SHIFT)
+#define BCM_PAGE_MASK (~(BCM_PAGE_SIZE - 1))
+#define BCM_PAGE_ALIGN(addr) (((addr) + BCM_PAGE_SIZE - 1) & BCM_PAGE_MASK)
+
+#define PAGES_PER_SGE_SHIFT 0
+#define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT)
+#define SGE_PAGE_SHIFT 12
+#define SGE_PAGE_SIZE (1 << SGE_PAGE_SHIFT)
+#define SGE_PAGE_MASK (~(SGE_PAGE_SIZE - 1))
+#define SGE_PAGE_ALIGN(addr) (((addr) + SGE_PAGE_SIZE - 1) & SGE_PAGE_MASK)
+#define SGE_PAGES (SGE_PAGE_SIZE * PAGES_PER_SGE)
+#define TPA_AGG_SIZE min_t(u32, (min_t(u32, 8, MAX_SKB_FRAGS) * \
+ SGE_PAGES), 0xffff)
+
+/* SGE ring related macros */
+#define NUM_RX_SGE_PAGES 2
+#define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
+#define NEXT_PAGE_SGE_DESC_CNT 2
+#define MAX_RX_SGE_CNT (RX_SGE_CNT - NEXT_PAGE_SGE_DESC_CNT)
+/* RX_SGE_CNT is promised to be a power of 2 */
+#define RX_SGE_MASK (RX_SGE_CNT - 1)
+#define NUM_RX_SGE (RX_SGE_CNT * NUM_RX_SGE_PAGES)
+#define MAX_RX_SGE (NUM_RX_SGE - 1)
+#define NEXT_SGE_IDX(x) ((((x) & RX_SGE_MASK) == \
+ (MAX_RX_SGE_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_SGE_DESC_CNT : \
+ (x) + 1)
+#define RX_SGE(x) ((x) & MAX_RX_SGE)
+
+/*
+ * Number of required SGEs is the sum of two:
+ * 1. Number of possible opened aggregations (next packet for
+ * these aggregations will probably consume SGE immediately)
+ * 2. Rest of BRB blocks divided by 2 (block will consume new SGE only
+ * after placement on BD for new TPA aggregation)
+ *
+ * Takes into account NEXT_PAGE_SGE_DESC_CNT "next" elements on each page
+ */
+#define NUM_SGE_REQ (MAX_AGG_QS(bp) + \
+ (BRB_SIZE(bp) - MAX_AGG_QS(bp)) / 2)
+#define NUM_SGE_PG_REQ ((NUM_SGE_REQ + MAX_RX_SGE_CNT - 1) / \
+ MAX_RX_SGE_CNT)
+#define SGE_TH_LO(bp) (NUM_SGE_REQ + \
+ NUM_SGE_PG_REQ * NEXT_PAGE_SGE_DESC_CNT)
+#define SGE_TH_HI(bp) (SGE_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
+/* Manipulate a bit vector defined as an array of u64 */
+
+/* Number of bits in one sge_mask array element */
+#define BIT_VEC64_ELEM_SZ 64
+#define BIT_VEC64_ELEM_SHIFT 6
+#define BIT_VEC64_ELEM_MASK ((u64)BIT_VEC64_ELEM_SZ - 1)
+
+#define __BIT_VEC64_SET_BIT(el, bit) \
+ do { \
+ el = ((el) | ((u64)0x1 << (bit))); \
+ } while (0)
+
+#define __BIT_VEC64_CLEAR_BIT(el, bit) \
+ do { \
+ el = ((el) & (~((u64)0x1 << (bit)))); \
+ } while (0)
+
+#define BIT_VEC64_SET_BIT(vec64, idx) \
+ __BIT_VEC64_SET_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \
+ (idx) & BIT_VEC64_ELEM_MASK)
+
+#define BIT_VEC64_CLEAR_BIT(vec64, idx) \
+ __BIT_VEC64_CLEAR_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \
+ (idx) & BIT_VEC64_ELEM_MASK)
+
+#define BIT_VEC64_TEST_BIT(vec64, idx) \
+ (((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT] >> \
+ ((idx) & BIT_VEC64_ELEM_MASK)) & 0x1)
+
+/* Creates a bitmask of all ones in less significant bits.
+ idx - index of the most significant bit in the created mask */
+#define BIT_VEC64_ONES_MASK(idx) \
+ (((u64)0x1 << (((idx) & BIT_VEC64_ELEM_MASK) + 1)) - 1)
+#define BIT_VEC64_ELEM_ONE_MASK ((u64)(~0))
+
+/*******************************************************/
+
+/* Number of u64 elements in SGE mask array */
+#define RX_SGE_MASK_LEN (NUM_RX_SGE / BIT_VEC64_ELEM_SZ)
+#define RX_SGE_MASK_LEN_MASK (RX_SGE_MASK_LEN - 1)
+#define NEXT_SGE_MASK_ELEM(el) (((el) + 1) & RX_SGE_MASK_LEN_MASK)
+
+union host_hc_status_block {
+ /* pointer to fp status block e1x */
+ struct host_hc_status_block_e1x *e1x_sb;
+ /* pointer to fp status block e2 */
+ struct host_hc_status_block_e2 *e2_sb;
+};
+
+struct bnx2x_agg_info {
+ /*
+ * First aggregation buffer is a data buffer, the following - are pages.
+ * We will preallocate the data buffer for each aggregation when
+ * we open the interface and will replace the BD at the consumer
+ * with this one when we receive the TPA_START CQE in order to
+ * keep the Rx BD ring consistent.
+ */
+ struct sw_rx_bd first_buf;
+ u8 tpa_state;
+#define BNX2X_TPA_START 1
+#define BNX2X_TPA_STOP 2
+#define BNX2X_TPA_ERROR 3
+ u8 placement_offset;
+ u16 parsing_flags;
+ u16 vlan_tag;
+ u16 len_on_bd;
+ u32 rxhash;
+ enum pkt_hash_types rxhash_type;
+ u16 gro_size;
+ u16 full_page;
+};
+
+#define Q_STATS_OFFSET32(stat_name) \
+ (offsetof(struct bnx2x_eth_q_stats, stat_name) / 4)
+
+struct bnx2x_fp_txdata {
+
+ struct sw_tx_bd *tx_buf_ring;
+
+ union eth_tx_bd_types *tx_desc_ring;
+ dma_addr_t tx_desc_mapping;
+
+ u32 cid;
+
+ union db_prod tx_db;
+
+ u16 tx_pkt_prod;
+ u16 tx_pkt_cons;
+ u16 tx_bd_prod;
+ u16 tx_bd_cons;
+
+ unsigned long tx_pkt;
+
+ __le16 *tx_cons_sb;
+
+ int txq_index;
+ struct bnx2x_fastpath *parent_fp;
+ int tx_ring_size;
+};
+
+enum bnx2x_tpa_mode_t {
+ TPA_MODE_DISABLED,
+ TPA_MODE_LRO,
+ TPA_MODE_GRO
+};
+
+struct bnx2x_alloc_pool {
+ struct page *page;
+ unsigned int offset;
+};
+
+struct bnx2x_fastpath {
+ struct bnx2x *bp; /* parent */
+
+ struct napi_struct napi;
+
+ union host_hc_status_block status_blk;
+ /* chip independent shortcuts into sb structure */
+ __le16 *sb_index_values;
+ __le16 *sb_running_index;
+ /* chip independent shortcut into rx_prods_offset memory */
+ u32 ustorm_rx_prods_offset;
+
+ u32 rx_buf_size;
+ u32 rx_frag_size; /* 0 if kmalloced(), or rx_buf_size + NET_SKB_PAD */
+ dma_addr_t status_blk_mapping;
+
+ enum bnx2x_tpa_mode_t mode;
+
+ u8 max_cos; /* actual number of active tx coses */
+ struct bnx2x_fp_txdata *txdata_ptr[BNX2X_MULTI_TX_COS];
+
+ struct sw_rx_bd *rx_buf_ring; /* BDs mappings ring */
+ struct sw_rx_page *rx_page_ring; /* SGE pages mappings ring */
+
+ struct eth_rx_bd *rx_desc_ring;
+ dma_addr_t rx_desc_mapping;
+
+ union eth_rx_cqe *rx_comp_ring;
+ dma_addr_t rx_comp_mapping;
+
+ /* SGE ring */
+ struct eth_rx_sge *rx_sge_ring;
+ dma_addr_t rx_sge_mapping;
+
+ u64 sge_mask[RX_SGE_MASK_LEN];
+
+ u32 cid;
+
+ __le16 fp_hc_idx;
+
+ u8 index; /* number in fp array */
+ u8 rx_queue; /* index for skb_record */
+ u8 cl_id; /* eth client id */
+ u8 cl_qzone_id;
+ u8 fw_sb_id; /* status block number in FW */
+ u8 igu_sb_id; /* status block number in HW */
+
+ u16 rx_bd_prod;
+ u16 rx_bd_cons;
+ u16 rx_comp_prod;
+ u16 rx_comp_cons;
+ u16 rx_sge_prod;
+ /* The last maximal completed SGE */
+ u16 last_max_sge;
+ __le16 *rx_cons_sb;
+
+ /* TPA related */
+ struct bnx2x_agg_info *tpa_info;
+#ifdef BNX2X_STOP_ON_ERROR
+ u64 tpa_queue_used;
+#endif
+ /* The size is calculated using the following:
+ sizeof name field from netdev structure +
+ 4 ('-Xx-' string) +
+ 4 (for the digits and to make it DWORD aligned) */
+#define FP_NAME_SIZE (sizeof(((struct net_device *)0)->name) + 8)
+ char name[FP_NAME_SIZE];
+
+ struct bnx2x_alloc_pool page_pool;
+};
+
+#define bnx2x_fp(bp, nr, var) ((bp)->fp[(nr)].var)
+#define bnx2x_sp_obj(bp, fp) ((bp)->sp_objs[(fp)->index])
+#define bnx2x_fp_stats(bp, fp) (&((bp)->fp_stats[(fp)->index]))
+#define bnx2x_fp_qstats(bp, fp) (&((bp)->fp_stats[(fp)->index].eth_q_stats))
+
+/* Use 2500 as a mini-jumbo MTU for FCoE */
+#define BNX2X_FCOE_MINI_JUMBO_MTU 2500
+
+#define FCOE_IDX_OFFSET 0
+
+#define FCOE_IDX(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) + \
+ FCOE_IDX_OFFSET)
+#define bnx2x_fcoe_fp(bp) (&bp->fp[FCOE_IDX(bp)])
+#define bnx2x_fcoe(bp, var) (bnx2x_fcoe_fp(bp)->var)
+#define bnx2x_fcoe_inner_sp_obj(bp) (&bp->sp_objs[FCOE_IDX(bp)])
+#define bnx2x_fcoe_sp_obj(bp, var) (bnx2x_fcoe_inner_sp_obj(bp)->var)
+#define bnx2x_fcoe_tx(bp, var) (bnx2x_fcoe_fp(bp)-> \
+ txdata_ptr[FIRST_TX_COS_INDEX] \
+ ->var)
+
+#define IS_ETH_FP(fp) ((fp)->index < BNX2X_NUM_ETH_QUEUES((fp)->bp))
+#define IS_FCOE_FP(fp) ((fp)->index == FCOE_IDX((fp)->bp))
+#define IS_FCOE_IDX(idx) ((idx) == FCOE_IDX(bp))
+
+/* MC hsi */
+#define MAX_FETCH_BD 13 /* HW max BDs per packet */
+#define RX_COPY_THRESH 92
+
+#define NUM_TX_RINGS 16
+#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types))
+#define NEXT_PAGE_TX_DESC_CNT 1
+#define MAX_TX_DESC_CNT (TX_DESC_CNT - NEXT_PAGE_TX_DESC_CNT)
+#define NUM_TX_BD (TX_DESC_CNT * NUM_TX_RINGS)
+#define MAX_TX_BD (NUM_TX_BD - 1)
+#define MAX_TX_AVAIL (MAX_TX_DESC_CNT * NUM_TX_RINGS - 2)
+#define NEXT_TX_IDX(x) ((((x) & MAX_TX_DESC_CNT) == \
+ (MAX_TX_DESC_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_TX_DESC_CNT : \
+ (x) + 1)
+#define TX_BD(x) ((x) & MAX_TX_BD)
+#define TX_BD_POFF(x) ((x) & MAX_TX_DESC_CNT)
+
+/* number of NEXT_PAGE descriptors may be required during placement */
+#define NEXT_CNT_PER_TX_PKT(bds) \
+ (((bds) + MAX_TX_DESC_CNT - 1) / \
+ MAX_TX_DESC_CNT * NEXT_PAGE_TX_DESC_CNT)
+/* max BDs per tx packet w/o next_pages:
+ * START_BD - describes packed
+ * START_BD(splitted) - includes unpaged data segment for GSO
+ * PARSING_BD - for TSO and CSUM data
+ * PARSING_BD2 - for encapsulation data
+ * Frag BDs - describes pages for frags
+ */
+#define BDS_PER_TX_PKT 4
+#define MAX_BDS_PER_TX_PKT (MAX_SKB_FRAGS + BDS_PER_TX_PKT)
+/* max BDs per tx packet including next pages */
+#define MAX_DESC_PER_TX_PKT (MAX_BDS_PER_TX_PKT + \
+ NEXT_CNT_PER_TX_PKT(MAX_BDS_PER_TX_PKT))
+
+/* The RX BD ring is special, each bd is 8 bytes but the last one is 16 */
+#define NUM_RX_RINGS 8
+#define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_bd))
+#define NEXT_PAGE_RX_DESC_CNT 2
+#define MAX_RX_DESC_CNT (RX_DESC_CNT - NEXT_PAGE_RX_DESC_CNT)
+#define RX_DESC_MASK (RX_DESC_CNT - 1)
+#define NUM_RX_BD (RX_DESC_CNT * NUM_RX_RINGS)
+#define MAX_RX_BD (NUM_RX_BD - 1)
+#define MAX_RX_AVAIL (MAX_RX_DESC_CNT * NUM_RX_RINGS - 2)
+
+/* dropless fc calculations for BDs
+ *
+ * Number of BDs should as number of buffers in BRB:
+ * Low threshold takes into account NEXT_PAGE_RX_DESC_CNT
+ * "next" elements on each page
+ */
+#define NUM_BD_REQ BRB_SIZE(bp)
+#define NUM_BD_PG_REQ ((NUM_BD_REQ + MAX_RX_DESC_CNT - 1) / \
+ MAX_RX_DESC_CNT)
+#define BD_TH_LO(bp) (NUM_BD_REQ + \
+ NUM_BD_PG_REQ * NEXT_PAGE_RX_DESC_CNT + \
+ FW_DROP_LEVEL(bp))
+#define BD_TH_HI(bp) (BD_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
+#define MIN_RX_AVAIL ((bp)->dropless_fc ? BD_TH_HI(bp) + 128 : 128)
+
+#define MIN_RX_SIZE_TPA_HW (CHIP_IS_E1(bp) ? \
+ ETH_MIN_RX_CQES_WITH_TPA_E1 : \
+ ETH_MIN_RX_CQES_WITH_TPA_E1H_E2)
+#define MIN_RX_SIZE_NONTPA_HW ETH_MIN_RX_CQES_WITHOUT_TPA
+#define MIN_RX_SIZE_TPA (max_t(u32, MIN_RX_SIZE_TPA_HW, MIN_RX_AVAIL))
+#define MIN_RX_SIZE_NONTPA (max_t(u32, MIN_RX_SIZE_NONTPA_HW,\
+ MIN_RX_AVAIL))
+
+#define NEXT_RX_IDX(x) ((((x) & RX_DESC_MASK) == \
+ (MAX_RX_DESC_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_RX_DESC_CNT : \
+ (x) + 1)
+#define RX_BD(x) ((x) & MAX_RX_BD)
+
+/*
+ * As long as CQE is X times bigger than BD entry we have to allocate X times
+ * more pages for CQ ring in order to keep it balanced with BD ring
+ */
+#define CQE_BD_REL (sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd))
+#define NUM_RCQ_RINGS (NUM_RX_RINGS * CQE_BD_REL)
+#define RCQ_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_rx_cqe))
+#define NEXT_PAGE_RCQ_DESC_CNT 1
+#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - NEXT_PAGE_RCQ_DESC_CNT)
+#define NUM_RCQ_BD (RCQ_DESC_CNT * NUM_RCQ_RINGS)
+#define MAX_RCQ_BD (NUM_RCQ_BD - 1)
+#define MAX_RCQ_AVAIL (MAX_RCQ_DESC_CNT * NUM_RCQ_RINGS - 2)
+#define NEXT_RCQ_IDX(x) ((((x) & MAX_RCQ_DESC_CNT) == \
+ (MAX_RCQ_DESC_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_RCQ_DESC_CNT : \
+ (x) + 1)
+#define RCQ_BD(x) ((x) & MAX_RCQ_BD)
+
+/* dropless fc calculations for RCQs
+ *
+ * Number of RCQs should be as number of buffers in BRB:
+ * Low threshold takes into account NEXT_PAGE_RCQ_DESC_CNT
+ * "next" elements on each page
+ */
+#define NUM_RCQ_REQ BRB_SIZE(bp)
+#define NUM_RCQ_PG_REQ ((NUM_BD_REQ + MAX_RCQ_DESC_CNT - 1) / \
+ MAX_RCQ_DESC_CNT)
+#define RCQ_TH_LO(bp) (NUM_RCQ_REQ + \
+ NUM_RCQ_PG_REQ * NEXT_PAGE_RCQ_DESC_CNT + \
+ FW_DROP_LEVEL(bp))
+#define RCQ_TH_HI(bp) (RCQ_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
+/* This is needed for determining of last_max */
+#define SUB_S16(a, b) (s16)((s16)(a) - (s16)(b))
+#define SUB_S32(a, b) (s32)((s32)(a) - (s32)(b))
+
+#define BNX2X_SWCID_SHIFT 17
+#define BNX2X_SWCID_MASK ((0x1 << BNX2X_SWCID_SHIFT) - 1)
+
+/* used on a CID received from the HW */
+#define SW_CID(x) (le32_to_cpu(x) & BNX2X_SWCID_MASK)
+#define CQE_CMD(x) (le32_to_cpu(x) >> \
+ COMMON_RAMROD_ETH_RX_CQE_CMD_ID_SHIFT)
+
+#define BD_UNMAP_ADDR(bd) HILO_U64(le32_to_cpu((bd)->addr_hi), \
+ le32_to_cpu((bd)->addr_lo))
+#define BD_UNMAP_LEN(bd) (le16_to_cpu((bd)->nbytes))
+
+#define BNX2X_DB_MIN_SHIFT 3 /* 8 bytes */
+#define BNX2X_DB_SHIFT 3 /* 8 bytes*/
+#if (BNX2X_DB_SHIFT < BNX2X_DB_MIN_SHIFT)
+#error "Min DB doorbell stride is 8"
+#endif
+#define DOORBELL_RELAXED(bp, cid, val) \
+ writel_relaxed((u32)(val), (bp)->doorbells + ((bp)->db_size * (cid)))
+
+/* TX CSUM helpers */
+#define SKB_CS_OFF(skb) (offsetof(struct tcphdr, check) - \
+ skb->csum_offset)
+#define SKB_CS(skb) (*(u16 *)(skb_transport_header(skb) + \
+ skb->csum_offset))
+
+#define pbd_tcp_flags(tcp_hdr) (ntohl(tcp_flag_word(tcp_hdr))>>16 & 0xff)
+
+#define XMIT_PLAIN 0
+#define XMIT_CSUM_V4 (1 << 0)
+#define XMIT_CSUM_V6 (1 << 1)
+#define XMIT_CSUM_TCP (1 << 2)
+#define XMIT_GSO_V4 (1 << 3)
+#define XMIT_GSO_V6 (1 << 4)
+#define XMIT_CSUM_ENC_V4 (1 << 5)
+#define XMIT_CSUM_ENC_V6 (1 << 6)
+#define XMIT_GSO_ENC_V4 (1 << 7)
+#define XMIT_GSO_ENC_V6 (1 << 8)
+
+#define XMIT_CSUM_ENC (XMIT_CSUM_ENC_V4 | XMIT_CSUM_ENC_V6)
+#define XMIT_GSO_ENC (XMIT_GSO_ENC_V4 | XMIT_GSO_ENC_V6)
+
+#define XMIT_CSUM (XMIT_CSUM_V4 | XMIT_CSUM_V6 | XMIT_CSUM_ENC)
+#define XMIT_GSO (XMIT_GSO_V4 | XMIT_GSO_V6 | XMIT_GSO_ENC)
+
+/* stuff added to make the code fit 80Col */
+#define CQE_TYPE(cqe_fp_flags) ((cqe_fp_flags) & ETH_FAST_PATH_RX_CQE_TYPE)
+#define CQE_TYPE_START(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_START_AGG)
+#define CQE_TYPE_STOP(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_STOP_AGG)
+#define CQE_TYPE_SLOW(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_RAMROD)
+#define CQE_TYPE_FAST(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_FASTPATH)
+
+#define ETH_RX_ERROR_FALGS ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG
+
+#define BNX2X_PRS_FLAG_OVERETH_IPV4(flags) \
+ (((le16_to_cpu(flags) & \
+ PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) >> \
+ PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT) \
+ == PRS_FLAG_OVERETH_IPV4)
+#define BNX2X_RX_SUM_FIX(cqe) \
+ BNX2X_PRS_FLAG_OVERETH_IPV4(cqe->fast_path_cqe.pars_flags.flags)
+
+#define FP_USB_FUNC_OFF \
+ offsetof(struct cstorm_status_block_u, func)
+#define FP_CSB_FUNC_OFF \
+ offsetof(struct cstorm_status_block_c, func)
+
+#define HC_INDEX_ETH_RX_CQ_CONS 1
+
+#define HC_INDEX_OOO_TX_CQ_CONS 4
+
+#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5
+
+#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6
+
+#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7
+
+#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0
+
+#define BNX2X_RX_SB_INDEX \
+ (&fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS])
+
+#define BNX2X_TX_SB_INDEX_BASE BNX2X_TX_SB_INDEX_COS0
+
+#define BNX2X_TX_SB_INDEX_COS0 \
+ (&fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0])
+
+/* end of fast path */
+
+/* common */
+
+struct bnx2x_common {
+
+ u32 chip_id;
+/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
+#define CHIP_ID(bp) (bp->common.chip_id & 0xfffffff0)
+
+#define CHIP_NUM(bp) (bp->common.chip_id >> 16)
+#define CHIP_NUM_57710 0x164e
+#define CHIP_NUM_57711 0x164f
+#define CHIP_NUM_57711E 0x1650
+#define CHIP_NUM_57712 0x1662
+#define CHIP_NUM_57712_MF 0x1663
+#define CHIP_NUM_57712_VF 0x166f
+#define CHIP_NUM_57713 0x1651
+#define CHIP_NUM_57713E 0x1652
+#define CHIP_NUM_57800 0x168a
+#define CHIP_NUM_57800_MF 0x16a5
+#define CHIP_NUM_57800_VF 0x16a9
+#define CHIP_NUM_57810 0x168e
+#define CHIP_NUM_57810_MF 0x16ae
+#define CHIP_NUM_57810_VF 0x16af
+#define CHIP_NUM_57811 0x163d
+#define CHIP_NUM_57811_MF 0x163e
+#define CHIP_NUM_57811_VF 0x163f
+#define CHIP_NUM_57840_OBSOLETE 0x168d
+#define CHIP_NUM_57840_MF_OBSOLETE 0x16ab
+#define CHIP_NUM_57840_4_10 0x16a1
+#define CHIP_NUM_57840_2_20 0x16a2
+#define CHIP_NUM_57840_MF 0x16a4
+#define CHIP_NUM_57840_VF 0x16ad
+#define CHIP_IS_E1(bp) (CHIP_NUM(bp) == CHIP_NUM_57710)
+#define CHIP_IS_57711(bp) (CHIP_NUM(bp) == CHIP_NUM_57711)
+#define CHIP_IS_57711E(bp) (CHIP_NUM(bp) == CHIP_NUM_57711E)
+#define CHIP_IS_57712(bp) (CHIP_NUM(bp) == CHIP_NUM_57712)
+#define CHIP_IS_57712_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57712_VF)
+#define CHIP_IS_57712_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57712_MF)
+#define CHIP_IS_57800(bp) (CHIP_NUM(bp) == CHIP_NUM_57800)
+#define CHIP_IS_57800_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57800_MF)
+#define CHIP_IS_57800_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57800_VF)
+#define CHIP_IS_57810(bp) (CHIP_NUM(bp) == CHIP_NUM_57810)
+#define CHIP_IS_57810_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57810_MF)
+#define CHIP_IS_57810_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57810_VF)
+#define CHIP_IS_57811(bp) (CHIP_NUM(bp) == CHIP_NUM_57811)
+#define CHIP_IS_57811_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57811_MF)
+#define CHIP_IS_57811_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57811_VF)
+#define CHIP_IS_57840(bp) \
+ ((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) || \
+ (CHIP_NUM(bp) == CHIP_NUM_57840_2_20) || \
+ (CHIP_NUM(bp) == CHIP_NUM_57840_OBSOLETE))
+#define CHIP_IS_57840_MF(bp) ((CHIP_NUM(bp) == CHIP_NUM_57840_MF) || \
+ (CHIP_NUM(bp) == CHIP_NUM_57840_MF_OBSOLETE))
+#define CHIP_IS_57840_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57840_VF)
+#define CHIP_IS_E1H(bp) (CHIP_IS_57711(bp) || \
+ CHIP_IS_57711E(bp))
+#define CHIP_IS_57811xx(bp) (CHIP_IS_57811(bp) || \
+ CHIP_IS_57811_MF(bp) || \
+ CHIP_IS_57811_VF(bp))
+#define CHIP_IS_E2(bp) (CHIP_IS_57712(bp) || \
+ CHIP_IS_57712_MF(bp) || \
+ CHIP_IS_57712_VF(bp))
+#define CHIP_IS_E3(bp) (CHIP_IS_57800(bp) || \
+ CHIP_IS_57800_MF(bp) || \
+ CHIP_IS_57800_VF(bp) || \
+ CHIP_IS_57810(bp) || \
+ CHIP_IS_57810_MF(bp) || \
+ CHIP_IS_57810_VF(bp) || \
+ CHIP_IS_57811xx(bp) || \
+ CHIP_IS_57840(bp) || \
+ CHIP_IS_57840_MF(bp) || \
+ CHIP_IS_57840_VF(bp))
+#define CHIP_IS_E1x(bp) (CHIP_IS_E1((bp)) || CHIP_IS_E1H((bp)))
+#define USES_WARPCORE(bp) (CHIP_IS_E3(bp))
+#define IS_E1H_OFFSET (!CHIP_IS_E1(bp))
+
+#define CHIP_REV_SHIFT 12
+#define CHIP_REV_MASK (0xF << CHIP_REV_SHIFT)
+#define CHIP_REV_VAL(bp) (bp->common.chip_id & CHIP_REV_MASK)
+#define CHIP_REV_Ax (0x0 << CHIP_REV_SHIFT)
+#define CHIP_REV_Bx (0x1 << CHIP_REV_SHIFT)
+/* assume maximum 5 revisions */
+#define CHIP_REV_IS_SLOW(bp) (CHIP_REV_VAL(bp) > 0x00005000)
+/* Emul versions are A=>0xe, B=>0xc, C=>0xa, D=>8, E=>6 */
+#define CHIP_REV_IS_EMUL(bp) ((CHIP_REV_IS_SLOW(bp)) && \
+ !(CHIP_REV_VAL(bp) & 0x00001000))
+/* FPGA versions are A=>0xf, B=>0xd, C=>0xb, D=>9, E=>7 */
+#define CHIP_REV_IS_FPGA(bp) ((CHIP_REV_IS_SLOW(bp)) && \
+ (CHIP_REV_VAL(bp) & 0x00001000))
+
+#define CHIP_TIME(bp) ((CHIP_REV_IS_EMUL(bp)) ? 2000 : \
+ ((CHIP_REV_IS_FPGA(bp)) ? 200 : 1))
+
+#define CHIP_METAL(bp) (bp->common.chip_id & 0x00000ff0)
+#define CHIP_BOND_ID(bp) (bp->common.chip_id & 0x0000000f)
+#define CHIP_REV_SIM(bp) (((CHIP_REV_MASK - CHIP_REV_VAL(bp)) >>\
+ (CHIP_REV_SHIFT + 1)) \
+ << CHIP_REV_SHIFT)
+#define CHIP_REV(bp) (CHIP_REV_IS_SLOW(bp) ? \
+ CHIP_REV_SIM(bp) :\
+ CHIP_REV_VAL(bp))
+#define CHIP_IS_E3B0(bp) (CHIP_IS_E3(bp) && \
+ (CHIP_REV(bp) == CHIP_REV_Bx))
+#define CHIP_IS_E3A0(bp) (CHIP_IS_E3(bp) && \
+ (CHIP_REV(bp) == CHIP_REV_Ax))
+/* This define is used in two main places:
+ * 1. In the early stages of nic_load, to know if to configure Parser / Searcher
+ * to nic-only mode or to offload mode. Offload mode is configured if either the
+ * chip is E1x (where MIC_MODE register is not applicable), or if cnic already
+ * registered for this port (which means that the user wants storage services).
+ * 2. During cnic-related load, to know if offload mode is already configured in
+ * the HW or needs to be configured.
+ * Since the transition from nic-mode to offload-mode in HW causes traffic
+ * corruption, nic-mode is configured only in ports on which storage services
+ * where never requested.
+ */
+#define CONFIGURE_NIC_MODE(bp) (!CHIP_IS_E1x(bp) && !CNIC_ENABLED(bp))
+
+ int flash_size;
+#define BNX2X_NVRAM_1MB_SIZE 0x20000 /* 1M bit in bytes */
+#define BNX2X_NVRAM_TIMEOUT_COUNT 30000
+#define BNX2X_NVRAM_PAGE_SIZE 256
+
+ u32 shmem_base;
+ u32 shmem2_base;
+ u32 mf_cfg_base;
+ u32 mf2_cfg_base;
+
+ u32 hw_config;
+
+ u32 bc_ver;
+
+ u8 int_block;
+#define INT_BLOCK_HC 0
+#define INT_BLOCK_IGU 1
+#define INT_BLOCK_MODE_NORMAL 0
+#define INT_BLOCK_MODE_BW_COMP 2
+#define CHIP_INT_MODE_IS_NBC(bp) \
+ (!CHIP_IS_E1x(bp) && \
+ !((bp)->common.int_block & INT_BLOCK_MODE_BW_COMP))
+#define CHIP_INT_MODE_IS_BC(bp) (!CHIP_INT_MODE_IS_NBC(bp))
+
+ u8 chip_port_mode;
+#define CHIP_4_PORT_MODE 0x0
+#define CHIP_2_PORT_MODE 0x1
+#define CHIP_PORT_MODE_NONE 0x2
+#define CHIP_MODE(bp) (bp->common.chip_port_mode)
+#define CHIP_MODE_IS_4_PORT(bp) (CHIP_MODE(bp) == CHIP_4_PORT_MODE)
+
+ u32 boot_mode;
+};
+
+/* IGU MSIX STATISTICS on 57712: 64 for VFs; 4 for PFs; 4 for Attentions */
+#define BNX2X_IGU_STAS_MSG_VF_CNT 64
+#define BNX2X_IGU_STAS_MSG_PF_CNT 4
+
+#define MAX_IGU_ATTN_ACK_TO 100
+/* end of common */
+
+/* port */
+
+struct bnx2x_port {
+ u32 pmf;
+
+ u32 link_config[LINK_CONFIG_SIZE];
+
+ u32 supported[LINK_CONFIG_SIZE];
+
+ u32 advertising[LINK_CONFIG_SIZE];
+
+ u32 phy_addr;
+
+ /* used to synchronize phy accesses */
+ struct mutex phy_mutex;
+
+ u32 port_stx;
+
+ struct nig_stats old_nig_stats;
+};
+
+/* end of port */
+
+#define STATS_OFFSET32(stat_name) \
+ (offsetof(struct bnx2x_eth_stats, stat_name) / 4)
+
+/* slow path */
+#define BNX2X_MAX_NUM_OF_VFS 64
+#define BNX2X_VF_CID_WND 4 /* log num of queues per VF. HW config. */
+#define BNX2X_CIDS_PER_VF (1 << BNX2X_VF_CID_WND)
+
+/* We need to reserve doorbell addresses for all VF and queue combinations */
+#define BNX2X_VF_CIDS (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF)
+
+/* The doorbell is configured to have the same number of CIDs for PFs and for
+ * VFs. For this reason the PF CID zone is as large as the VF zone.
+ */
+#define BNX2X_FIRST_VF_CID BNX2X_VF_CIDS
+#define BNX2X_MAX_NUM_VF_QUEUES 64
+#define BNX2X_VF_ID_INVALID 0xFF
+
+/* the number of VF CIDS multiplied by the amount of bytes reserved for each
+ * cid must not exceed the size of the VF doorbell
+ */
+#define BNX2X_VF_BAR_SIZE 512
+#if (BNX2X_VF_BAR_SIZE < BNX2X_CIDS_PER_VF * (1 << BNX2X_DB_SHIFT))
+#error "VF doorbell bar size is 512"
+#endif
+
+/*
+ * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is
+ * control by the number of fast-path status blocks supported by the
+ * device (HW/FW). Each fast-path status block (FP-SB) aka non-default
+ * status block represents an independent interrupts context that can
+ * serve a regular L2 networking queue. However special L2 queues such
+ * as the FCoE queue do not require a FP-SB and other components like
+ * the CNIC may consume FP-SB reducing the number of possible L2 queues
+ *
+ * If the maximum number of FP-SB available is X then:
+ * a. If CNIC is supported it consumes 1 FP-SB thus the max number of
+ * regular L2 queues is Y=X-1
+ * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor)
+ * c. If the FCoE L2 queue is supported the actual number of L2 queues
+ * is Y+1
+ * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for
+ * slow-path interrupts) or Y+2 if CNIC is supported (one additional
+ * FP interrupt context for the CNIC).
+ * e. The number of HW context (CID count) is always X or X+1 if FCoE
+ * L2 queue is supported. The cid for the FCoE L2 queue is always X.
+ */
+
+/* fast-path interrupt contexts E1x */
+#define FP_SB_MAX_E1x 16
+/* fast-path interrupt contexts E2 */
+#define FP_SB_MAX_E2 HC_SB_MAX_SB_E2
+
+union cdu_context {
+ struct eth_context eth;
+ char pad[1024];
+};
+
+/* CDU host DB constants */
+#define CDU_ILT_PAGE_SZ_HW 2
+#define CDU_ILT_PAGE_SZ (8192 << CDU_ILT_PAGE_SZ_HW) /* 32K */
+#define ILT_PAGE_CIDS (CDU_ILT_PAGE_SZ / sizeof(union cdu_context))
+
+#define CNIC_ISCSI_CID_MAX 256
+#define CNIC_FCOE_CID_MAX 2048
+#define CNIC_CID_MAX (CNIC_ISCSI_CID_MAX + CNIC_FCOE_CID_MAX)
+#define CNIC_ILT_LINES DIV_ROUND_UP(CNIC_CID_MAX, ILT_PAGE_CIDS)
+
+#define QM_ILT_PAGE_SZ_HW 0
+#define QM_ILT_PAGE_SZ (4096 << QM_ILT_PAGE_SZ_HW) /* 4K */
+#define QM_CID_ROUND 1024
+
+/* TM (timers) host DB constants */
+#define TM_ILT_PAGE_SZ_HW 0
+#define TM_ILT_PAGE_SZ (4096 << TM_ILT_PAGE_SZ_HW) /* 4K */
+#define TM_CONN_NUM (BNX2X_FIRST_VF_CID + \
+ BNX2X_VF_CIDS + \
+ CNIC_ISCSI_CID_MAX)
+#define TM_ILT_SZ (8 * TM_CONN_NUM)
+#define TM_ILT_LINES DIV_ROUND_UP(TM_ILT_SZ, TM_ILT_PAGE_SZ)
+
+/* SRC (Searcher) host DB constants */
+#define SRC_ILT_PAGE_SZ_HW 0
+#define SRC_ILT_PAGE_SZ (4096 << SRC_ILT_PAGE_SZ_HW) /* 4K */
+#define SRC_HASH_BITS 10
+#define SRC_CONN_NUM (1 << SRC_HASH_BITS) /* 1024 */
+#define SRC_ILT_SZ (sizeof(struct src_ent) * SRC_CONN_NUM)
+#define SRC_T2_SZ SRC_ILT_SZ
+#define SRC_ILT_LINES DIV_ROUND_UP(SRC_ILT_SZ, SRC_ILT_PAGE_SZ)
+
+#define MAX_DMAE_C 8
+
+/* DMA memory not used in fastpath */
+struct bnx2x_slowpath {
+ union {
+ struct mac_configuration_cmd e1x;
+ struct eth_classify_rules_ramrod_data e2;
+ } mac_rdata;
+
+ union {
+ struct eth_classify_rules_ramrod_data e2;
+ } vlan_rdata;
+
+ union {
+ struct tstorm_eth_mac_filter_config e1x;
+ struct eth_filter_rules_ramrod_data e2;
+ } rx_mode_rdata;
+
+ union {
+ struct mac_configuration_cmd e1;
+ struct eth_multicast_rules_ramrod_data e2;
+ } mcast_rdata;
+
+ struct eth_rss_update_ramrod_data rss_rdata;
+
+ /* Queue State related ramrods are always sent under rtnl_lock */
+ union {
+ struct client_init_ramrod_data init_data;
+ struct client_update_ramrod_data update_data;
+ struct tpa_update_ramrod_data tpa_data;
+ } q_rdata;
+
+ union {
+ struct function_start_data func_start;
+ /* pfc configuration for DCBX ramrod */
+ struct flow_control_configuration pfc_config;
+ } func_rdata;
+
+ /* afex ramrod can not be a part of func_rdata union because these
+ * events might arrive in parallel to other events from func_rdata.
+ * Therefore, if they would have been defined in the same union,
+ * data can get corrupted.
+ */
+ union {
+ struct afex_vif_list_ramrod_data viflist_data;
+ struct function_update_data func_update;
+ } func_afex_rdata;
+
+ /* used by dmae command executer */
+ struct dmae_command dmae[MAX_DMAE_C];
+
+ u32 stats_comp;
+ union mac_stats mac_stats;
+ struct nig_stats nig_stats;
+ struct host_port_stats port_stats;
+ struct host_func_stats func_stats;
+
+ u32 wb_comp;
+ u32 wb_data[4];
+
+ union drv_info_to_mcp drv_info_to_mcp;
+};
+
+#define bnx2x_sp(bp, var) (&bp->slowpath->var)
+#define bnx2x_sp_mapping(bp, var) \
+ (bp->slowpath_mapping + offsetof(struct bnx2x_slowpath, var))
+
+/* attn group wiring */
+#define MAX_DYNAMIC_ATTN_GRPS 8
+
+struct attn_route {
+ u32 sig[5];
+};
+
+struct iro {
+ u32 base;
+ u16 m1;
+ u16 m2;
+ u16 m3;
+ u16 size;
+};
+
+struct hw_context {
+ union cdu_context *vcxt;
+ dma_addr_t cxt_mapping;
+ size_t size;
+};
+
+/* forward */
+struct bnx2x_ilt;
+
+struct bnx2x_vfdb;
+
+enum bnx2x_recovery_state {
+ BNX2X_RECOVERY_DONE,
+ BNX2X_RECOVERY_INIT,
+ BNX2X_RECOVERY_WAIT,
+ BNX2X_RECOVERY_FAILED,
+ BNX2X_RECOVERY_NIC_LOADING
+};
+
+/*
+ * Event queue (EQ or event ring) MC hsi
+ * NUM_EQ_PAGES and EQ_DESC_CNT_PAGE must be power of 2
+ */
+#define NUM_EQ_PAGES 1
+#define EQ_DESC_CNT_PAGE (BCM_PAGE_SIZE / sizeof(union event_ring_elem))
+#define EQ_DESC_MAX_PAGE (EQ_DESC_CNT_PAGE - 1)
+#define NUM_EQ_DESC (EQ_DESC_CNT_PAGE * NUM_EQ_PAGES)
+#define EQ_DESC_MASK (NUM_EQ_DESC - 1)
+#define MAX_EQ_AVAIL (EQ_DESC_MAX_PAGE * NUM_EQ_PAGES - 2)
+
+/* depends on EQ_DESC_CNT_PAGE being a power of 2 */
+#define NEXT_EQ_IDX(x) ((((x) & EQ_DESC_MAX_PAGE) == \
+ (EQ_DESC_MAX_PAGE - 1)) ? (x) + 2 : (x) + 1)
+
+/* depends on the above and on NUM_EQ_PAGES being a power of 2 */
+#define EQ_DESC(x) ((x) & EQ_DESC_MASK)
+
+#define BNX2X_EQ_INDEX \
+ (&bp->def_status_blk->sp_sb.\
+ index_values[HC_SP_INDEX_EQ_CONS])
+
+/* This is a data that will be used to create a link report message.
+ * We will keep the data used for the last link report in order
+ * to prevent reporting the same link parameters twice.
+ */
+struct bnx2x_link_report_data {
+ u16 line_speed; /* Effective line speed */
+ unsigned long link_report_flags;/* BNX2X_LINK_REPORT_XXX flags */
+};
+
+enum {
+ BNX2X_LINK_REPORT_FD, /* Full DUPLEX */
+ BNX2X_LINK_REPORT_LINK_DOWN,
+ BNX2X_LINK_REPORT_RX_FC_ON,
+ BNX2X_LINK_REPORT_TX_FC_ON,
+};
+
+enum {
+ BNX2X_PORT_QUERY_IDX,
+ BNX2X_PF_QUERY_IDX,
+ BNX2X_FCOE_QUERY_IDX,
+ BNX2X_FIRST_QUEUE_QUERY_IDX,
+};
+
+struct bnx2x_fw_stats_req {
+ struct stats_query_header hdr;
+ struct stats_query_entry query[FP_SB_MAX_E1x+
+ BNX2X_FIRST_QUEUE_QUERY_IDX];
+};
+
+struct bnx2x_fw_stats_data {
+ struct stats_counter storm_counters;
+ struct per_port_stats port;
+ struct per_pf_stats pf;
+ struct fcoe_statistics_params fcoe;
+ struct per_queue_stats queue_stats[];
+};
+
+/* Public slow path states */
+enum sp_rtnl_flag {
+ BNX2X_SP_RTNL_SETUP_TC,
+ BNX2X_SP_RTNL_TX_TIMEOUT,
+ BNX2X_SP_RTNL_FAN_FAILURE,
+ BNX2X_SP_RTNL_AFEX_F_UPDATE,
+ BNX2X_SP_RTNL_ENABLE_SRIOV,
+ BNX2X_SP_RTNL_VFPF_MCAST,
+ BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN,
+ BNX2X_SP_RTNL_RX_MODE,
+ BNX2X_SP_RTNL_HYPERVISOR_VLAN,
+ BNX2X_SP_RTNL_TX_STOP,
+ BNX2X_SP_RTNL_GET_DRV_VERSION,
+ BNX2X_SP_RTNL_UPDATE_SVID,
+};
+
+enum bnx2x_iov_flag {
+ BNX2X_IOV_HANDLE_VF_MSG,
+ BNX2X_IOV_HANDLE_FLR,
+};
+
+struct bnx2x_prev_path_list {
+ struct list_head list;
+ u8 bus;
+ u8 slot;
+ u8 path;
+ u8 aer;
+ u8 undi;
+};
+
+struct bnx2x_sp_objs {
+ /* MACs object */
+ struct bnx2x_vlan_mac_obj mac_obj;
+
+ /* Queue State object */
+ struct bnx2x_queue_sp_obj q_obj;
+
+ /* VLANs object */
+ struct bnx2x_vlan_mac_obj vlan_obj;
+};
+
+struct bnx2x_fp_stats {
+ struct tstorm_per_queue_stats old_tclient;
+ struct ustorm_per_queue_stats old_uclient;
+ struct xstorm_per_queue_stats old_xclient;
+ struct bnx2x_eth_q_stats eth_q_stats;
+ struct bnx2x_eth_q_stats_old eth_q_stats_old;
+};
+
+enum {
+ SUB_MF_MODE_UNKNOWN = 0,
+ SUB_MF_MODE_UFP,
+ SUB_MF_MODE_NPAR1_DOT_5,
+ SUB_MF_MODE_BD,
+};
+
+struct bnx2x_vlan_entry {
+ struct list_head link;
+ u16 vid;
+ bool hw;
+};
+
+enum bnx2x_udp_port_type {
+ BNX2X_UDP_PORT_VXLAN,
+ BNX2X_UDP_PORT_GENEVE,
+ BNX2X_UDP_PORT_MAX,
+};
+
+struct bnx2x {
+ /* Fields used in the tx and intr/napi performance paths
+ * are grouped together in the beginning of the structure
+ */
+ struct bnx2x_fastpath *fp;
+ struct bnx2x_sp_objs *sp_objs;
+ struct bnx2x_fp_stats *fp_stats;
+ struct bnx2x_fp_txdata *bnx2x_txq;
+ void __iomem *regview;
+ void __iomem *doorbells;
+ u16 db_size;
+
+ u8 pf_num; /* absolute PF number */
+ u8 pfid; /* per-path PF number */
+ int base_fw_ndsb; /**/
+#define BP_PATH(bp) (CHIP_IS_E1x(bp) ? 0 : (bp->pf_num & 1))
+#define BP_PORT(bp) (bp->pfid & 1)
+#define BP_FUNC(bp) (bp->pfid)
+#define BP_ABS_FUNC(bp) (bp->pf_num)
+#define BP_VN(bp) ((bp)->pfid >> 1)
+#define BP_MAX_VN_NUM(bp) (CHIP_MODE_IS_4_PORT(bp) ? 2 : 4)
+#define BP_L_ID(bp) (BP_VN(bp) << 2)
+#define BP_FW_MB_IDX_VN(bp, vn) (BP_PORT(bp) +\
+ (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1))
+#define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp))
+
+#ifdef CONFIG_BNX2X_SRIOV
+ /* protects vf2pf mailbox from simultaneous access */
+ struct mutex vf2pf_mutex;
+ /* vf pf channel mailbox contains request and response buffers */
+ struct bnx2x_vf_mbx_msg *vf2pf_mbox;
+ dma_addr_t vf2pf_mbox_mapping;
+
+ /* we set aside a copy of the acquire response */
+ struct pfvf_acquire_resp_tlv acquire_resp;
+
+ /* bulletin board for messages from pf to vf */
+ union pf_vf_bulletin *pf2vf_bulletin;
+ dma_addr_t pf2vf_bulletin_mapping;
+
+ union pf_vf_bulletin shadow_bulletin;
+ struct pf_vf_bulletin_content old_bulletin;
+
+ u16 requested_nr_virtfn;
+#endif /* CONFIG_BNX2X_SRIOV */
+
+ struct net_device *dev;
+ struct pci_dev *pdev;
+
+ const struct iro *iro_arr;
+#define IRO (bp->iro_arr)
+
+ enum bnx2x_recovery_state recovery_state;
+ int is_leader;
+ struct msix_entry *msix_table;
+
+ int tx_ring_size;
+
+/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
+#define ETH_OVERHEAD (ETH_HLEN + 8 + 8)
+#define ETH_MIN_PACKET_SIZE (ETH_ZLEN - ETH_HLEN)
+#define ETH_MAX_PACKET_SIZE ETH_DATA_LEN
+#define ETH_MAX_JUMBO_PACKET_SIZE 9600
+/* TCP with Timestamp Option (32) + IPv6 (40) */
+#define ETH_MAX_TPA_HEADER_SIZE 72
+
+ /* Max supported alignment is 256 (8 shift)
+ * minimal alignment shift 6 is optimal for 57xxx HW performance
+ */
+#define BNX2X_RX_ALIGN_SHIFT max(6, min(8, L1_CACHE_SHIFT))
+
+ /* FW uses 2 Cache lines Alignment for start packet and size
+ *
+ * We assume skb_build() uses sizeof(struct skb_shared_info) bytes
+ * at the end of skb->data, to avoid wasting a full cache line.
+ * This reduces memory use (skb->truesize).
+ */
+#define BNX2X_FW_RX_ALIGN_START (1UL << BNX2X_RX_ALIGN_SHIFT)
+
+#define BNX2X_FW_RX_ALIGN_END \
+ max_t(u64, 1UL << BNX2X_RX_ALIGN_SHIFT, \
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
+
+#define BNX2X_PXP_DRAM_ALIGN (BNX2X_RX_ALIGN_SHIFT - 5)
+
+ struct host_sp_status_block *def_status_blk;
+#define DEF_SB_IGU_ID 16
+#define DEF_SB_ID HC_SP_SB_ID
+ __le16 def_idx;
+ __le16 def_att_idx;
+ u32 attn_state;
+ struct attn_route attn_group[MAX_DYNAMIC_ATTN_GRPS];
+
+ /* slow path ring */
+ struct eth_spe *spq;
+ dma_addr_t spq_mapping;
+ u16 spq_prod_idx;
+ struct eth_spe *spq_prod_bd;
+ struct eth_spe *spq_last_bd;
+ __le16 *dsb_sp_prod;
+ atomic_t cq_spq_left; /* ETH_XXX ramrods credit */
+ /* used to synchronize spq accesses */
+ spinlock_t spq_lock;
+
+ /* event queue */
+ union event_ring_elem *eq_ring;
+ dma_addr_t eq_mapping;
+ u16 eq_prod;
+ u16 eq_cons;
+ __le16 *eq_cons_sb;
+ atomic_t eq_spq_left; /* COMMON_XXX ramrods credit */
+
+ /* Counter for marking that there is a STAT_QUERY ramrod pending */
+ u16 stats_pending;
+ /* Counter for completed statistics ramrods */
+ u16 stats_comp;
+
+ /* End of fields used in the performance code paths */
+
+ int panic;
+ int msg_enable;
+
+ u32 flags;
+#define PCIX_FLAG (1 << 0)
+#define PCI_32BIT_FLAG (1 << 1)
+#define ONE_PORT_FLAG (1 << 2)
+#define NO_WOL_FLAG (1 << 3)
+#define USING_MSIX_FLAG (1 << 5)
+#define USING_MSI_FLAG (1 << 6)
+#define DISABLE_MSI_FLAG (1 << 7)
+#define NO_MCP_FLAG (1 << 9)
+#define MF_FUNC_DIS (1 << 11)
+#define OWN_CNIC_IRQ (1 << 12)
+#define NO_ISCSI_OOO_FLAG (1 << 13)
+#define NO_ISCSI_FLAG (1 << 14)
+#define NO_FCOE_FLAG (1 << 15)
+#define BC_SUPPORTS_PFC_STATS (1 << 17)
+#define TX_SWITCHING (1 << 18)
+#define BC_SUPPORTS_FCOE_FEATURES (1 << 19)
+#define USING_SINGLE_MSIX_FLAG (1 << 20)
+#define BC_SUPPORTS_DCBX_MSG_NON_PMF (1 << 21)
+#define IS_VF_FLAG (1 << 22)
+#define BC_SUPPORTS_RMMOD_CMD (1 << 23)
+#define HAS_PHYS_PORT_ID (1 << 24)
+#define AER_ENABLED (1 << 25)
+#define PTP_SUPPORTED (1 << 26)
+#define TX_TIMESTAMPING_EN (1 << 27)
+
+#define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG)
+
+#ifdef CONFIG_BNX2X_SRIOV
+#define IS_VF(bp) ((bp)->flags & IS_VF_FLAG)
+#define IS_PF(bp) (!((bp)->flags & IS_VF_FLAG))
+#else
+#define IS_VF(bp) false
+#define IS_PF(bp) true
+#endif
+
+#define NO_ISCSI(bp) ((bp)->flags & NO_ISCSI_FLAG)
+#define NO_ISCSI_OOO(bp) ((bp)->flags & NO_ISCSI_OOO_FLAG)
+#define NO_FCOE(bp) ((bp)->flags & NO_FCOE_FLAG)
+
+ u8 cnic_support;
+ bool cnic_enabled;
+ bool cnic_loaded;
+ struct cnic_eth_dev *(*cnic_probe)(struct net_device *);
+
+ /* Flag that indicates that we can start looking for FCoE L2 queue
+ * completions in the default status block.
+ */
+ bool fcoe_init;
+
+ int mrrs;
+
+ struct delayed_work sp_task;
+ struct delayed_work iov_task;
+
+ atomic_t interrupt_occurred;
+ struct delayed_work sp_rtnl_task;
+
+ struct delayed_work period_task;
+ struct timer_list timer;
+ int current_interval;
+
+ u16 fw_seq;
+ u16 fw_drv_pulse_wr_seq;
+ u32 func_stx;
+
+ struct link_params link_params;
+ struct link_vars link_vars;
+ u32 link_cnt;
+ struct bnx2x_link_report_data last_reported_link;
+ bool force_link_down;
+
+ struct mdio_if_info mdio;
+
+ struct bnx2x_common common;
+ struct bnx2x_port port;
+
+ struct cmng_init cmng;
+
+ u32 mf_config[E1HVN_MAX];
+ u32 mf_ext_config;
+ u32 path_has_ovlan; /* E3 */
+ u16 mf_ov;
+ u8 mf_mode;
+#define IS_MF(bp) (bp->mf_mode != 0)
+#define IS_MF_SI(bp) (bp->mf_mode == MULTI_FUNCTION_SI)
+#define IS_MF_SD(bp) (bp->mf_mode == MULTI_FUNCTION_SD)
+#define IS_MF_AFEX(bp) (bp->mf_mode == MULTI_FUNCTION_AFEX)
+ u8 mf_sub_mode;
+#define IS_MF_UFP(bp) (IS_MF_SD(bp) && \
+ bp->mf_sub_mode == SUB_MF_MODE_UFP)
+#define IS_MF_BD(bp) (IS_MF_SD(bp) && \
+ bp->mf_sub_mode == SUB_MF_MODE_BD)
+
+ u8 wol;
+
+ int rx_ring_size;
+
+ u16 tx_quick_cons_trip_int;
+ u16 tx_quick_cons_trip;
+ u16 tx_ticks_int;
+ u16 tx_ticks;
+
+ u16 rx_quick_cons_trip_int;
+ u16 rx_quick_cons_trip;
+ u16 rx_ticks_int;
+ u16 rx_ticks;
+/* Maximal coalescing timeout in us */
+#define BNX2X_MAX_COALESCE_TOUT (0xff*BNX2X_BTR)
+
+ u32 lin_cnt;
+
+ u16 state;
+#define BNX2X_STATE_CLOSED 0
+#define BNX2X_STATE_OPENING_WAIT4_LOAD 0x1000
+#define BNX2X_STATE_OPENING_WAIT4_PORT 0x2000
+#define BNX2X_STATE_OPEN 0x3000
+#define BNX2X_STATE_CLOSING_WAIT4_HALT 0x4000
+#define BNX2X_STATE_CLOSING_WAIT4_DELETE 0x5000
+
+#define BNX2X_STATE_DIAG 0xe000
+#define BNX2X_STATE_ERROR 0xf000
+
+#define BNX2X_MAX_PRIORITY 8
+ int num_queues;
+ uint num_ethernet_queues;
+ uint num_cnic_queues;
+ int disable_tpa;
+
+ u32 rx_mode;
+#define BNX2X_RX_MODE_NONE 0
+#define BNX2X_RX_MODE_NORMAL 1
+#define BNX2X_RX_MODE_ALLMULTI 2
+#define BNX2X_RX_MODE_PROMISC 3
+#define BNX2X_MAX_MULTICAST 64
+
+ u8 igu_dsb_id;
+ u8 igu_base_sb;
+ u8 igu_sb_cnt;
+ u8 min_msix_vec_cnt;
+
+ u32 igu_base_addr;
+ dma_addr_t def_status_blk_mapping;
+
+ struct bnx2x_slowpath *slowpath;
+ dma_addr_t slowpath_mapping;
+
+ /* Mechanism protecting the drv_info_to_mcp */
+ struct mutex drv_info_mutex;
+ bool drv_info_mng_owner;
+
+ /* Total number of FW statistics requests */
+ u8 fw_stats_num;
+
+ /*
+ * This is a memory buffer that will contain both statistics
+ * ramrod request and data.
+ */
+ void *fw_stats;
+ dma_addr_t fw_stats_mapping;
+
+ /*
+ * FW statistics request shortcut (points at the
+ * beginning of fw_stats buffer).
+ */
+ struct bnx2x_fw_stats_req *fw_stats_req;
+ dma_addr_t fw_stats_req_mapping;
+ int fw_stats_req_sz;
+
+ /*
+ * FW statistics data shortcut (points at the beginning of
+ * fw_stats buffer + fw_stats_req_sz).
+ */
+ struct bnx2x_fw_stats_data *fw_stats_data;
+ dma_addr_t fw_stats_data_mapping;
+ int fw_stats_data_sz;
+
+ /* For max 1024 cids (VF RSS), 32KB ILT page size and 1KB
+ * context size we need 8 ILT entries.
+ */
+#define ILT_MAX_L2_LINES 32
+ struct hw_context context[ILT_MAX_L2_LINES];
+
+ struct bnx2x_ilt *ilt;
+#define BP_ILT(bp) ((bp)->ilt)
+#define ILT_MAX_LINES 256
+/*
+ * Maximum supported number of RSS queues: number of IGU SBs minus one that goes
+ * to CNIC.
+ */
+#define BNX2X_MAX_RSS_COUNT(bp) ((bp)->igu_sb_cnt - CNIC_SUPPORT(bp))
+
+/*
+ * Maximum CID count that might be required by the bnx2x:
+ * Max RSS * Max_Tx_Multi_Cos + FCoE + iSCSI
+ */
+
+#define BNX2X_L2_CID_COUNT(bp) (BNX2X_NUM_ETH_QUEUES(bp) * BNX2X_MULTI_TX_COS \
+ + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
+#define BNX2X_L2_MAX_CID(bp) (BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS \
+ + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
+#define L2_ILT_LINES(bp) (DIV_ROUND_UP(BNX2X_L2_CID_COUNT(bp),\
+ ILT_PAGE_CIDS))
+
+ int qm_cid_count;
+
+ bool dropless_fc;
+
+ void *t2;
+ dma_addr_t t2_mapping;
+ struct cnic_ops __rcu *cnic_ops;
+ void *cnic_data;
+ u32 cnic_tag;
+ struct cnic_eth_dev cnic_eth_dev;
+ union host_hc_status_block cnic_sb;
+ dma_addr_t cnic_sb_mapping;
+ struct eth_spe *cnic_kwq;
+ struct eth_spe *cnic_kwq_prod;
+ struct eth_spe *cnic_kwq_cons;
+ struct eth_spe *cnic_kwq_last;
+ u16 cnic_kwq_pending;
+ u16 cnic_spq_pending;
+ u8 fip_mac[ETH_ALEN];
+ struct mutex cnic_mutex;
+ struct bnx2x_vlan_mac_obj iscsi_l2_mac_obj;
+
+ /* Start index of the "special" (CNIC related) L2 clients */
+ u8 cnic_base_cl_id;
+
+ int dmae_ready;
+ /* used to synchronize dmae accesses */
+ spinlock_t dmae_lock;
+
+ /* used to protect the FW mail box */
+ struct mutex fw_mb_mutex;
+
+ /* used to synchronize stats collecting */
+ int stats_state;
+
+ /* used for synchronization of concurrent threads statistics handling */
+ struct semaphore stats_lock;
+
+ /* used by dmae command loader */
+ struct dmae_command stats_dmae;
+ int executer_idx;
+
+ u16 stats_counter;
+ struct bnx2x_eth_stats eth_stats;
+ struct host_func_stats func_stats;
+ struct bnx2x_eth_stats_old eth_stats_old;
+ struct bnx2x_net_stats_old net_stats_old;
+ struct bnx2x_fw_port_stats_old fw_stats_old;
+ bool stats_init;
+
+ struct z_stream_s *strm;
+ void *gunzip_buf;
+ dma_addr_t gunzip_mapping;
+ int gunzip_outlen;
+#define FW_BUF_SIZE 0x8000
+#define GUNZIP_BUF(bp) (bp->gunzip_buf)
+#define GUNZIP_PHYS(bp) (bp->gunzip_mapping)
+#define GUNZIP_OUTLEN(bp) (bp->gunzip_outlen)
+
+ struct raw_op *init_ops;
+ /* Init blocks offsets inside init_ops */
+ u16 *init_ops_offsets;
+ /* Data blob - has 32 bit granularity */
+ u32 *init_data;
+ u32 init_mode_flags;
+#define INIT_MODE_FLAGS(bp) (bp->init_mode_flags)
+ /* Zipped PRAM blobs - raw data */
+ const u8 *tsem_int_table_data;
+ const u8 *tsem_pram_data;
+ const u8 *usem_int_table_data;
+ const u8 *usem_pram_data;
+ const u8 *xsem_int_table_data;
+ const u8 *xsem_pram_data;
+ const u8 *csem_int_table_data;
+ const u8 *csem_pram_data;
+#define INIT_OPS(bp) (bp->init_ops)
+#define INIT_OPS_OFFSETS(bp) (bp->init_ops_offsets)
+#define INIT_DATA(bp) (bp->init_data)
+#define INIT_TSEM_INT_TABLE_DATA(bp) (bp->tsem_int_table_data)
+#define INIT_TSEM_PRAM_DATA(bp) (bp->tsem_pram_data)
+#define INIT_USEM_INT_TABLE_DATA(bp) (bp->usem_int_table_data)
+#define INIT_USEM_PRAM_DATA(bp) (bp->usem_pram_data)
+#define INIT_XSEM_INT_TABLE_DATA(bp) (bp->xsem_int_table_data)
+#define INIT_XSEM_PRAM_DATA(bp) (bp->xsem_pram_data)
+#define INIT_CSEM_INT_TABLE_DATA(bp) (bp->csem_int_table_data)
+#define INIT_CSEM_PRAM_DATA(bp) (bp->csem_pram_data)
+
+#define PHY_FW_VER_LEN 20
+ char fw_ver[32];
+ const struct firmware *firmware;
+
+ struct bnx2x_vfdb *vfdb;
+#define IS_SRIOV(bp) ((bp)->vfdb)
+
+ /* DCB support on/off */
+ u16 dcb_state;
+#define BNX2X_DCB_STATE_OFF 0
+#define BNX2X_DCB_STATE_ON 1
+
+ /* DCBX engine mode */
+ int dcbx_enabled;
+#define BNX2X_DCBX_ENABLED_OFF 0
+#define BNX2X_DCBX_ENABLED_ON_NEG_OFF 1
+#define BNX2X_DCBX_ENABLED_ON_NEG_ON 2
+#define BNX2X_DCBX_ENABLED_INVALID (-1)
+
+ bool dcbx_mode_uset;
+
+ struct bnx2x_config_dcbx_params dcbx_config_params;
+ struct bnx2x_dcbx_port_params dcbx_port_params;
+ int dcb_version;
+
+ /* CAM credit pools */
+ struct bnx2x_credit_pool_obj vlans_pool;
+
+ struct bnx2x_credit_pool_obj macs_pool;
+
+ /* RX_MODE object */
+ struct bnx2x_rx_mode_obj rx_mode_obj;
+
+ /* MCAST object */
+ struct bnx2x_mcast_obj mcast_obj;
+
+ /* RSS configuration object */
+ struct bnx2x_rss_config_obj rss_conf_obj;
+
+ /* Function State controlling object */
+ struct bnx2x_func_sp_obj func_obj;
+
+ unsigned long sp_state;
+
+ /* operation indication for the sp_rtnl task */
+ unsigned long sp_rtnl_state;
+
+ /* Indication of the IOV tasks */
+ unsigned long iov_task_state;
+
+ /* DCBX Negotiation results */
+ struct dcbx_features dcbx_local_feat;
+ u32 dcbx_error;
+
+#ifdef BCM_DCBNL
+ struct dcbx_features dcbx_remote_feat;
+ u32 dcbx_remote_flags;
+#endif
+ /* AFEX: store default vlan used */
+ int afex_def_vlan_tag;
+ enum mf_cfg_afex_vlan_mode afex_vlan_mode;
+ u32 pending_max;
+
+ /* multiple tx classes of service */
+ u8 max_cos;
+
+ /* priority to cos mapping */
+ u8 prio_to_cos[8];
+
+ int fp_array_size;
+ u32 dump_preset_idx;
+
+ u8 phys_port_id[ETH_ALEN];
+
+ /* PTP related context */
+ struct ptp_clock *ptp_clock;
+ struct ptp_clock_info ptp_clock_info;
+ struct work_struct ptp_task;
+ struct cyclecounter cyclecounter;
+ struct timecounter timecounter;
+ bool timecounter_init_done;
+ struct sk_buff *ptp_tx_skb;
+ unsigned long ptp_tx_start;
+ bool hwtstamp_ioctl_called;
+ u16 tx_type;
+ u16 rx_filter;
+
+ struct bnx2x_link_report_data vf_link_vars;
+ struct list_head vlan_reg;
+ u16 vlan_cnt;
+ u16 vlan_credit;
+ bool accept_any_vlan;
+
+ /* Vxlan/Geneve related information */
+ u16 udp_tunnel_ports[BNX2X_UDP_PORT_MAX];
+
+#define FW_CAP_INVALIDATE_VF_FP_HSI BIT(0)
+ u32 fw_cap;
+
+ u32 fw_major;
+ u32 fw_minor;
+ u32 fw_rev;
+ u32 fw_eng;
+};
+
+/* Tx queues may be less or equal to Rx queues */
+extern int num_queues;
+#define BNX2X_NUM_QUEUES(bp) (bp->num_queues)
+#define BNX2X_NUM_ETH_QUEUES(bp) ((bp)->num_ethernet_queues)
+#define BNX2X_NUM_NON_CNIC_QUEUES(bp) (BNX2X_NUM_QUEUES(bp) - \
+ (bp)->num_cnic_queues)
+#define BNX2X_NUM_RX_QUEUES(bp) BNX2X_NUM_QUEUES(bp)
+
+#define is_multi(bp) (BNX2X_NUM_QUEUES(bp) > 1)
+
+#define BNX2X_MAX_QUEUES(bp) BNX2X_MAX_RSS_COUNT(bp)
+/* #define is_eth_multi(bp) (BNX2X_NUM_ETH_QUEUES(bp) > 1) */
+
+#define RSS_IPV4_CAP_MASK \
+ TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_CAPABILITY
+
+#define RSS_IPV4_TCP_CAP_MASK \
+ TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_TCP_CAPABILITY
+
+#define RSS_IPV6_CAP_MASK \
+ TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_CAPABILITY
+
+#define RSS_IPV6_TCP_CAP_MASK \
+ TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY
+
+struct bnx2x_func_init_params {
+ /* dma */
+ bool spq_active;
+ dma_addr_t spq_map;
+ u16 spq_prod;
+
+ u16 func_id; /* abs fid */
+ u16 pf_id;
+};
+
+#define for_each_cnic_queue(bp, var) \
+ for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
+ (var)++) \
+ if (skip_queue(bp, var)) \
+ continue; \
+ else
+
+#define for_each_eth_queue(bp, var) \
+ for ((var) = 0; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++)
+
+#define for_each_nondefault_eth_queue(bp, var) \
+ for ((var) = 1; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++)
+
+#define for_each_queue(bp, var) \
+ for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
+ if (skip_queue(bp, var)) \
+ continue; \
+ else
+
+/* Skip forwarding FP */
+#define for_each_valid_rx_queue(bp, var) \
+ for ((var) = 0; \
+ (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) : \
+ BNX2X_NUM_ETH_QUEUES(bp)); \
+ (var)++) \
+ if (skip_rx_queue(bp, var)) \
+ continue; \
+ else
+
+#define for_each_rx_queue_cnic(bp, var) \
+ for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
+ (var)++) \
+ if (skip_rx_queue(bp, var)) \
+ continue; \
+ else
+
+#define for_each_rx_queue(bp, var) \
+ for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
+ if (skip_rx_queue(bp, var)) \
+ continue; \
+ else
+
+/* Skip OOO FP */
+#define for_each_valid_tx_queue(bp, var) \
+ for ((var) = 0; \
+ (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) : \
+ BNX2X_NUM_ETH_QUEUES(bp)); \
+ (var)++) \
+ if (skip_tx_queue(bp, var)) \
+ continue; \
+ else
+
+#define for_each_tx_queue_cnic(bp, var) \
+ for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
+ (var)++) \
+ if (skip_tx_queue(bp, var)) \
+ continue; \
+ else
+
+#define for_each_tx_queue(bp, var) \
+ for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
+ if (skip_tx_queue(bp, var)) \
+ continue; \
+ else
+
+#define for_each_nondefault_queue(bp, var) \
+ for ((var) = 1; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
+ if (skip_queue(bp, var)) \
+ continue; \
+ else
+
+#define for_each_cos_in_tx_queue(fp, var) \
+ for ((var) = 0; (var) < (fp)->max_cos; (var)++)
+
+/* skip rx queue
+ * if FCOE l2 support is disabled and this is the fcoe L2 queue
+ */
+#define skip_rx_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx))
+
+/* skip tx queue
+ * if FCOE l2 support is disabled and this is the fcoe L2 queue
+ */
+#define skip_tx_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx))
+
+#define skip_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx))
+
+/*self test*/
+int bnx2x_idle_chk(struct bnx2x *bp);
+
+/**
+ * bnx2x_set_mac_one - configure a single MAC address
+ *
+ * @bp: driver handle
+ * @mac: MAC to configure
+ * @obj: MAC object handle
+ * @set: if 'true' add a new MAC, otherwise - delete
+ * @mac_type: the type of the MAC to configure (e.g. ETH, UC list)
+ * @ramrod_flags: RAMROD_XXX flags (e.g. RAMROD_CONT, RAMROD_COMP_WAIT)
+ *
+ * Configures one MAC according to provided parameters or continues the
+ * execution of previously scheduled commands if RAMROD_CONT is set in
+ * ramrod_flags.
+ *
+ * Returns zero if operation has successfully completed, a positive value if the
+ * operation has been successfully scheduled and a negative - if a requested
+ * operations has failed.
+ */
+int bnx2x_set_mac_one(struct bnx2x *bp, const u8 *mac,
+ struct bnx2x_vlan_mac_obj *obj, bool set,
+ int mac_type, unsigned long *ramrod_flags);
+
+int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan,
+ struct bnx2x_vlan_mac_obj *obj, bool set,
+ unsigned long *ramrod_flags);
+
+/**
+ * bnx2x_del_all_macs - delete all MACs configured for the specific MAC object
+ *
+ * @bp: driver handle
+ * @mac_obj: MAC object handle
+ * @mac_type: type of the MACs to clear (BNX2X_XXX_MAC)
+ * @wait_for_comp: if 'true' block until completion
+ *
+ * Deletes all MACs of the specific type (e.g. ETH, UC list).
+ *
+ * Returns zero if operation has successfully completed, a positive value if the
+ * operation has been successfully scheduled and a negative - if a requested
+ * operations has failed.
+ */
+int bnx2x_del_all_macs(struct bnx2x *bp,
+ struct bnx2x_vlan_mac_obj *mac_obj,
+ int mac_type, bool wait_for_comp);
+
+/* Init Function API */
+void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p);
+void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
+ u8 vf_valid, int fw_sb_id, int igu_sb_id);
+int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port);
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
+int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode);
+int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
+void bnx2x_read_mf_cfg(struct bnx2x *bp);
+
+int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val);
+
+/* dmae */
+void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
+void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
+ u32 len32);
+void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx);
+u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type);
+u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode);
+u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
+ bool with_comp, u8 comp_type);
+
+void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
+ u8 src_type, u8 dst_type);
+int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
+ u32 *comp);
+
+/* FLR related routines */
+u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp);
+void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count);
+int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt);
+u8 bnx2x_is_pcie_pending(struct pci_dev *dev);
+int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg,
+ char *msg, u32 poll_cnt);
+
+void bnx2x_calc_fc_adv(struct bnx2x *bp);
+int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
+ u32 data_hi, u32 data_lo, int cmd_type);
+void bnx2x_update_coalesce(struct bnx2x *bp);
+int bnx2x_get_cur_phy_idx(struct bnx2x *bp);
+
+bool bnx2x_port_after_undi(struct bnx2x *bp);
+
+static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
+ int wait)
+{
+ u32 val;
+
+ do {
+ val = REG_RD(bp, reg);
+ if (val == expected)
+ break;
+ ms -= wait;
+ msleep(wait);
+
+ } while (ms > 0);
+
+ return val;
+}
+
+void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
+ bool is_pf);
+
+#define BNX2X_ILT_ZALLOC(x, y, size) \
+ x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL)
+
+#define BNX2X_ILT_FREE(x, y, size) \
+ do { \
+ if (x) { \
+ dma_free_coherent(&bp->pdev->dev, size, x, y); \
+ x = NULL; \
+ y = 0; \
+ } \
+ } while (0)
+
+#define ILOG2(x) (ilog2((x)))
+
+#define ILT_NUM_PAGE_ENTRIES (3072)
+/* In 57710/11 we use whole table since we have 8 func
+ * In 57712 we have only 4 func, but use same size per func, then only half of
+ * the table in use
+ */
+#define ILT_PER_FUNC (ILT_NUM_PAGE_ENTRIES/8)
+
+#define FUNC_ILT_BASE(func) (func * ILT_PER_FUNC)
+/*
+ * the phys address is shifted right 12 bits and has an added
+ * 1=valid bit added to the 53rd bit
+ * then since this is a wide register(TM)
+ * we split it into two 32 bit writes
+ */
+#define ONCHIP_ADDR1(x) ((u32)(((u64)x >> 12) & 0xFFFFFFFF))
+#define ONCHIP_ADDR2(x) ((u32)((1 << 20) | ((u64)x >> 44)))
+
+/* load/unload mode */
+#define LOAD_NORMAL 0
+#define LOAD_OPEN 1
+#define LOAD_DIAG 2
+#define LOAD_LOOPBACK_EXT 3
+#define UNLOAD_NORMAL 0
+#define UNLOAD_CLOSE 1
+#define UNLOAD_RECOVERY 2
+
+/* DMAE command defines */
+#define DMAE_TIMEOUT -1
+#define DMAE_PCI_ERROR -2 /* E2 and onward */
+#define DMAE_NOT_RDY -3
+#define DMAE_PCI_ERR_FLAG 0x80000000
+
+#define DMAE_SRC_PCI 0
+#define DMAE_SRC_GRC 1
+
+#define DMAE_DST_NONE 0
+#define DMAE_DST_PCI 1
+#define DMAE_DST_GRC 2
+
+#define DMAE_COMP_PCI 0
+#define DMAE_COMP_GRC 1
+
+/* E2 and onward - PCI error handling in the completion */
+
+#define DMAE_COMP_REGULAR 0
+#define DMAE_COM_SET_ERR 1
+
+#define DMAE_CMD_SRC_PCI (DMAE_SRC_PCI << \
+ DMAE_COMMAND_SRC_SHIFT)
+#define DMAE_CMD_SRC_GRC (DMAE_SRC_GRC << \
+ DMAE_COMMAND_SRC_SHIFT)
+
+#define DMAE_CMD_DST_PCI (DMAE_DST_PCI << \
+ DMAE_COMMAND_DST_SHIFT)
+#define DMAE_CMD_DST_GRC (DMAE_DST_GRC << \
+ DMAE_COMMAND_DST_SHIFT)
+
+#define DMAE_CMD_C_DST_PCI (DMAE_COMP_PCI << \
+ DMAE_COMMAND_C_DST_SHIFT)
+#define DMAE_CMD_C_DST_GRC (DMAE_COMP_GRC << \
+ DMAE_COMMAND_C_DST_SHIFT)
+
+#define DMAE_CMD_C_ENABLE DMAE_COMMAND_C_TYPE_ENABLE
+
+#define DMAE_CMD_ENDIANITY_NO_SWAP (0 << DMAE_COMMAND_ENDIANITY_SHIFT)
+#define DMAE_CMD_ENDIANITY_B_SWAP (1 << DMAE_COMMAND_ENDIANITY_SHIFT)
+#define DMAE_CMD_ENDIANITY_DW_SWAP (2 << DMAE_COMMAND_ENDIANITY_SHIFT)
+#define DMAE_CMD_ENDIANITY_B_DW_SWAP (3 << DMAE_COMMAND_ENDIANITY_SHIFT)
+
+#define DMAE_CMD_PORT_0 0
+#define DMAE_CMD_PORT_1 DMAE_COMMAND_PORT
+
+#define DMAE_CMD_SRC_RESET DMAE_COMMAND_SRC_RESET
+#define DMAE_CMD_DST_RESET DMAE_COMMAND_DST_RESET
+#define DMAE_CMD_E1HVN_SHIFT DMAE_COMMAND_E1HVN_SHIFT
+
+#define DMAE_SRC_PF 0
+#define DMAE_SRC_VF 1
+
+#define DMAE_DST_PF 0
+#define DMAE_DST_VF 1
+
+#define DMAE_C_SRC 0
+#define DMAE_C_DST 1
+
+#define DMAE_LEN32_RD_MAX 0x80
+#define DMAE_LEN32_WR_MAX(bp) (CHIP_IS_E1(bp) ? 0x400 : 0x2000)
+
+#define DMAE_COMP_VAL 0x60d0d0ae /* E2 and on - upper bit
+ * indicates error
+ */
+
+#define MAX_DMAE_C_PER_PORT 8
+#define INIT_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
+ BP_VN(bp))
+#define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
+ E1HVN_MAX)
+
+/* Following is the DMAE channel number allocation for the clients.
+ * MFW: OCBB/OCSD implementations use DMAE channels 14/15 respectively.
+ * Driver: 0-3 and 8-11 (for PF dmae operations)
+ * 4 and 12 (for stats requests)
+ */
+#define BNX2X_FW_DMAE_C 13 /* Channel for FW DMAE operations */
+
+/* PCIE link and speed */
+#define PCICFG_LINK_WIDTH 0x1f00000
+#define PCICFG_LINK_WIDTH_SHIFT 20
+#define PCICFG_LINK_SPEED 0xf0000
+#define PCICFG_LINK_SPEED_SHIFT 16
+
+#define BNX2X_NUM_TESTS_SF 7
+#define BNX2X_NUM_TESTS_MF 3
+#define BNX2X_NUM_TESTS(bp) (IS_MF(bp) ? BNX2X_NUM_TESTS_MF : \
+ IS_VF(bp) ? 0 : BNX2X_NUM_TESTS_SF)
+
+#define BNX2X_PHY_LOOPBACK 0
+#define BNX2X_MAC_LOOPBACK 1
+#define BNX2X_EXT_LOOPBACK 2
+#define BNX2X_PHY_LOOPBACK_FAILED 1
+#define BNX2X_MAC_LOOPBACK_FAILED 2
+#define BNX2X_EXT_LOOPBACK_FAILED 3
+#define BNX2X_LOOPBACK_FAILED (BNX2X_MAC_LOOPBACK_FAILED | \
+ BNX2X_PHY_LOOPBACK_FAILED)
+
+#define STROM_ASSERT_ARRAY_SIZE 50
+
+/* must be used on a CID before placing it on a HW ring */
+#define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \
+ (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \
+ (x))
+
+#define SP_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_spe))
+#define MAX_SP_DESC_CNT (SP_DESC_CNT - 1)
+
+#define BNX2X_BTR 4
+#define MAX_SPQ_PENDING 8
+
+/* CMNG constants, as derived from system spec calculations */
+/* default MIN rate in case VNIC min rate is configured to zero - 100Mbps */
+#define DEF_MIN_RATE 100
+/* resolution of the rate shaping timer - 400 usec */
+#define RS_PERIODIC_TIMEOUT_USEC 400
+/* number of bytes in single QM arbitration cycle -
+ * coefficient for calculating the fairness timer */
+#define QM_ARB_BYTES 160000
+/* resolution of Min algorithm 1:100 */
+#define MIN_RES 100
+/* how many bytes above threshold for the minimal credit of Min algorithm*/
+#define MIN_ABOVE_THRESH 32768
+/* Fairness algorithm integration time coefficient -
+ * for calculating the actual Tfair */
+#define T_FAIR_COEF ((MIN_ABOVE_THRESH + QM_ARB_BYTES) * 8 * MIN_RES)
+/* Memory of fairness algorithm . 2 cycles */
+#define FAIR_MEM 2
+
+#define ATTN_NIG_FOR_FUNC (1L << 8)
+#define ATTN_SW_TIMER_4_FUNC (1L << 9)
+#define GPIO_2_FUNC (1L << 10)
+#define GPIO_3_FUNC (1L << 11)
+#define GPIO_4_FUNC (1L << 12)
+#define ATTN_GENERAL_ATTN_1 (1L << 13)
+#define ATTN_GENERAL_ATTN_2 (1L << 14)
+#define ATTN_GENERAL_ATTN_3 (1L << 15)
+#define ATTN_GENERAL_ATTN_4 (1L << 13)
+#define ATTN_GENERAL_ATTN_5 (1L << 14)
+#define ATTN_GENERAL_ATTN_6 (1L << 15)
+
+#define ATTN_HARD_WIRED_MASK 0xff00
+#define ATTENTION_ID 4
+
+#define IS_MF_STORAGE_ONLY(bp) (IS_MF_STORAGE_PERSONALITY_ONLY(bp) || \
+ IS_MF_FCOE_AFEX(bp))
+
+/* stuff added to make the code fit 80Col */
+
+#define BNX2X_PMF_LINK_ASSERT \
+ GENERAL_ATTEN_OFFSET(LINK_SYNC_ATTENTION_BIT_FUNC_0 + BP_FUNC(bp))
+
+#define BNX2X_MC_ASSERT_BITS \
+ (GENERAL_ATTEN_OFFSET(TSTORM_FATAL_ASSERT_ATTENTION_BIT) | \
+ GENERAL_ATTEN_OFFSET(USTORM_FATAL_ASSERT_ATTENTION_BIT) | \
+ GENERAL_ATTEN_OFFSET(CSTORM_FATAL_ASSERT_ATTENTION_BIT) | \
+ GENERAL_ATTEN_OFFSET(XSTORM_FATAL_ASSERT_ATTENTION_BIT))
+
+#define BNX2X_MCP_ASSERT \
+ GENERAL_ATTEN_OFFSET(MCP_FATAL_ASSERT_ATTENTION_BIT)
+
+#define BNX2X_GRC_TIMEOUT GENERAL_ATTEN_OFFSET(LATCHED_ATTN_TIMEOUT_GRC)
+#define BNX2X_GRC_RSV (GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCR) | \
+ GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCT) | \
+ GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCN) | \
+ GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCU) | \
+ GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCP) | \
+ GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RSVD_GRC))
+
+#define HW_INTERRUPT_ASSERT_SET_0 \
+ (AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT)
+#define HW_PRTY_ASSERT_SET_0 (AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR)
+#define HW_INTERRUPT_ASSERT_SET_1 \
+ (AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT)
+#define HW_PRTY_ASSERT_SET_1 (AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR)
+#define HW_INTERRUPT_ASSERT_SET_2 \
+ (AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT | \
+ AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT |\
+ AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT)
+#define HW_PRTY_ASSERT_SET_2 (AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR)
+
+#define HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD \
+ (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY)
+
+#define HW_PRTY_ASSERT_SET_3 (HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD | \
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
+
+#define HW_PRTY_ASSERT_SET_4 (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | \
+ AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)
+
+#define MULTI_MASK 0x7f
+
+#define DEF_USB_FUNC_OFF offsetof(struct cstorm_def_status_block_u, func)
+#define DEF_CSB_FUNC_OFF offsetof(struct cstorm_def_status_block_c, func)
+#define DEF_XSB_FUNC_OFF offsetof(struct xstorm_def_status_block, func)
+#define DEF_TSB_FUNC_OFF offsetof(struct tstorm_def_status_block, func)
+
+#define DEF_USB_IGU_INDEX_OFF \
+ offsetof(struct cstorm_def_status_block_u, igu_index)
+#define DEF_CSB_IGU_INDEX_OFF \
+ offsetof(struct cstorm_def_status_block_c, igu_index)
+#define DEF_XSB_IGU_INDEX_OFF \
+ offsetof(struct xstorm_def_status_block, igu_index)
+#define DEF_TSB_IGU_INDEX_OFF \
+ offsetof(struct tstorm_def_status_block, igu_index)
+
+#define DEF_USB_SEGMENT_OFF \
+ offsetof(struct cstorm_def_status_block_u, segment)
+#define DEF_CSB_SEGMENT_OFF \
+ offsetof(struct cstorm_def_status_block_c, segment)
+#define DEF_XSB_SEGMENT_OFF \
+ offsetof(struct xstorm_def_status_block, segment)
+#define DEF_TSB_SEGMENT_OFF \
+ offsetof(struct tstorm_def_status_block, segment)
+
+#define BNX2X_SP_DSB_INDEX \
+ (&bp->def_status_blk->sp_sb.\
+ index_values[HC_SP_INDEX_ETH_DEF_CONS])
+
+#define CAM_IS_INVALID(x) \
+ (GET_FLAG(x.flags, \
+ MAC_CONFIGURATION_ENTRY_ACTION_TYPE) == \
+ (T_ETH_MAC_COMMAND_INVALIDATE))
+
+/* Number of u32 elements in MC hash array */
+#define MC_HASH_SIZE 8
+#define MC_HASH_OFFSET(bp, i) (BAR_TSTRORM_INTMEM + \
+ TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(BP_FUNC(bp)) + i*4)
+
+#ifndef PXP2_REG_PXP2_INT_STS
+#define PXP2_REG_PXP2_INT_STS PXP2_REG_PXP2_INT_STS_0
+#endif
+
+#ifndef ETH_MAX_RX_CLIENTS_E2
+#define ETH_MAX_RX_CLIENTS_E2 ETH_MAX_RX_CLIENTS_E1H
+#endif
+
+#define VENDOR_ID_LEN 4
+
+#define VF_ACQUIRE_THRESH 3
+#define VF_ACQUIRE_MAC_FILTERS 1
+#define VF_ACQUIRE_MC_FILTERS 10
+#define VF_ACQUIRE_VLAN_FILTERS 2 /* VLAN0 + 'real' VLAN */
+
+#define GOOD_ME_REG(me_reg) (((me_reg) & ME_REG_VF_VALID) && \
+ (!((me_reg) & ME_REG_VF_ERR)))
+int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err);
+
+/* Congestion management fairness mode */
+#define CMNG_FNS_NONE 0
+#define CMNG_FNS_MINMAX 1
+
+#define HC_SEG_ACCESS_DEF 0 /*Driver decision 0-3*/
+#define HC_SEG_ACCESS_ATTN 4
+#define HC_SEG_ACCESS_NORM 0 /*Driver decision 0-1*/
+
+void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev);
+void bnx2x_notify_link_changed(struct bnx2x *bp);
+
+#define BNX2X_MF_SD_PROTOCOL(bp) \
+ ((bp)->mf_config[BP_VN(bp)] & FUNC_MF_CFG_PROTOCOL_MASK)
+
+#define BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) \
+ (BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_ISCSI)
+
+#define BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) \
+ (BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_FCOE)
+
+#define IS_MF_ISCSI_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp))
+#define IS_MF_FCOE_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))
+#define IS_MF_ISCSI_SI(bp) (IS_MF_SI(bp) && BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp))
+
+#define IS_MF_ISCSI_ONLY(bp) (IS_MF_ISCSI_SD(bp) || IS_MF_ISCSI_SI(bp))
+
+#define BNX2X_MF_EXT_PROTOCOL_MASK \
+ (MACP_FUNC_CFG_FLAGS_ETHERNET | \
+ MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD | \
+ MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
+
+#define BNX2X_MF_EXT_PROT(bp) ((bp)->mf_ext_config & \
+ BNX2X_MF_EXT_PROTOCOL_MASK)
+
+#define BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp) \
+ (BNX2X_MF_EXT_PROT(bp) & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
+
+#define BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp) \
+ (BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
+
+#define BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp) \
+ (BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD)
+
+#define IS_MF_FCOE_AFEX(bp) \
+ (IS_MF_AFEX(bp) && BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp))
+
+#define IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp) \
+ (IS_MF_SD(bp) && \
+ (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) || \
+ BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)))
+
+#define IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp) \
+ (IS_MF_SI(bp) && \
+ (BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp) || \
+ BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp)))
+
+#define IS_MF_STORAGE_PERSONALITY_ONLY(bp) \
+ (IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp) || \
+ IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp))
+
+/* Determines whether BW configuration arrives in 100Mb units or in
+ * percentages from actual physical link speed.
+ */
+#define IS_MF_PERCENT_BW(bp) (IS_MF_SI(bp) || IS_MF_UFP(bp) || IS_MF_BD(bp))
+
+#define SET_FLAG(value, mask, flag) \
+ do {\
+ (value) &= ~(mask);\
+ (value) |= ((flag) << (mask##_SHIFT));\
+ } while (0)
+
+#define GET_FLAG(value, mask) \
+ (((value) & (mask)) >> (mask##_SHIFT))
+
+#define GET_FIELD(value, fname) \
+ (((value) & (fname##_MASK)) >> (fname##_SHIFT))
+
+enum {
+ SWITCH_UPDATE,
+ AFEX_UPDATE,
+};
+
+#define NUM_MACS 8
+
+void bnx2x_set_local_cmng(struct bnx2x *bp);
+
+void bnx2x_update_mng_version(struct bnx2x *bp);
+
+void bnx2x_update_mfw_dump(struct bnx2x *bp);
+
+#define MCPR_SCRATCH_BASE(bp) \
+ (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
+
+#define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX))
+
+void bnx2x_init_ptp(struct bnx2x *bp);
+int bnx2x_configure_ptp_filters(struct bnx2x *bp);
+void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb);
+void bnx2x_register_phc(struct bnx2x *bp);
+
+#define BNX2X_MAX_PHC_DRIFT 31000000
+#define BNX2X_PTP_TX_TIMEOUT
+
+/* Re-configure all previously configured vlan filters.
+ * Meant for implicit re-load flows.
+ */
+int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp);
+#endif /* bnx2x.h */