diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb/espi.c')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb/espi.c | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb/espi.c b/drivers/net/ethernet/chelsio/cxgb/espi.c new file mode 100644 index 000000000..ef7056943 --- /dev/null +++ b/drivers/net/ethernet/chelsio/cxgb/espi.c @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0-only +/***************************************************************************** + * * + * File: espi.c * + * $Revision: 1.14 $ * + * $Date: 2005/05/14 00:59:32 $ * + * Description: * + * Ethernet SPI functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "espi.h" + +struct peespi { + adapter_t *adapter; + struct espi_intr_counts intr_cnt; + u32 misc_ctrl; + spinlock_t lock; +}; + +#define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \ + F_RAMPARITYERR | F_DIP2PARITYERR) +#define MON_MASK (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \ + | F_MONITORED_INTERFACE) + +#define TRICN_CNFG 14 +#define TRICN_CMD_READ 0x11 +#define TRICN_CMD_WRITE 0x21 +#define TRICN_CMD_ATTEMPTS 10 + +static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, + int ch_addr, int reg_offset, u32 wr_data) +{ + int busy, attempts = TRICN_CMD_ATTEMPTS; + + writel(V_WRITE_DATA(wr_data) | + V_REGISTER_OFFSET(reg_offset) | + V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | + V_BUNDLE_ADDR(bundle_addr) | + V_SPI4_COMMAND(TRICN_CMD_WRITE), + adapter->regs + A_ESPI_CMD_ADDR); + writel(0, adapter->regs + A_ESPI_GOSTAT); + + do { + busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; + } while (busy && --attempts); + + if (busy) + pr_err("%s: TRICN write timed out\n", adapter->name); + + return busy; +} + +static int tricn_init(adapter_t *adapter) +{ + int i, sme = 1; + + if (!(readl(adapter->regs + A_ESPI_RX_RESET) & F_RX_CLK_STATUS)) { + pr_err("%s: ESPI clock not ready\n", adapter->name); + return -1; + } + + writel(F_ESPI_RX_CORE_RST, adapter->regs + A_ESPI_RX_RESET); + + if (sme) { + tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81); + } + for (i = 1; i <= 8; i++) + tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1); + for (i = 1; i <= 2; i++) + tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1); + for (i = 1; i <= 3; i++) + tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); + tricn_write(adapter, 0, 2, 4, TRICN_CNFG, 0xf1); + tricn_write(adapter, 0, 2, 5, TRICN_CNFG, 0xe1); + tricn_write(adapter, 0, 2, 6, TRICN_CNFG, 0xf1); + tricn_write(adapter, 0, 2, 7, TRICN_CNFG, 0x80); + tricn_write(adapter, 0, 2, 8, TRICN_CNFG, 0xf1); + + writel(F_ESPI_RX_CORE_RST | F_ESPI_RX_LNK_RST, + adapter->regs + A_ESPI_RX_RESET); + + return 0; +} + +void t1_espi_intr_enable(struct peespi *espi) +{ + u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); + + /* + * Cannot enable ESPI interrupts on T1B because HW asserts the + * interrupt incorrectly, namely the driver gets ESPI interrupts + * but no data is actually dropped (can verify this reading the ESPI + * drop registers). Also, once the ESPI interrupt is asserted it + * cannot be cleared (HW bug). + */ + enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK; + writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); +} + +void t1_espi_intr_clear(struct peespi *espi) +{ + readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); + writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS); + writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE); +} + +void t1_espi_intr_disable(struct peespi *espi) +{ + u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); + + writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); +} + +int t1_espi_intr_handler(struct peespi *espi) +{ + u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); + + if (status & F_DIP4ERR) + espi->intr_cnt.DIP4_err++; + if (status & F_RXDROP) + espi->intr_cnt.rx_drops++; + if (status & F_TXDROP) + espi->intr_cnt.tx_drops++; + if (status & F_RXOVERFLOW) + espi->intr_cnt.rx_ovflw++; + if (status & F_RAMPARITYERR) + espi->intr_cnt.parity_err++; + if (status & F_DIP2PARITYERR) { + espi->intr_cnt.DIP2_parity_err++; + + /* + * Must read the error count to clear the interrupt + * that it causes. + */ + readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); + } + + /* + * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we + * write the status as is. + */ + if (status && t1_is_T1B(espi->adapter)) + status = 1; + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); + return 0; +} + +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi) +{ + return &espi->intr_cnt; +} + +static void espi_setup_for_pm3393(adapter_t *adapter) +{ + u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; + + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3); + writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH); + writel(0x08000008, adapter->regs + A_ESPI_TRAIN); + writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG); +} + +static void espi_setup_for_vsc7321(adapter_t *adapter) +{ + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); + writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); + writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH); + writel(V_RX_NPORTS(4) | V_TX_NPORTS(4), adapter->regs + A_PORT_CONFIG); + + writel(0x08000008, adapter->regs + A_ESPI_TRAIN); +} + +/* + * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug. + */ +static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) +{ + writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH); + if (nports == 4) { + if (is_T2(adapter)) { + writel(0xf00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(0x3c0, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + } else { + writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + } + } else { + writel(0x1fff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + } + writel(V_RX_NPORTS(nports) | V_TX_NPORTS(nports), adapter->regs + A_PORT_CONFIG); + +} + +int t1_espi_init(struct peespi *espi, int mac_type, int nports) +{ + u32 status_enable_extra = 0; + adapter_t *adapter = espi->adapter; + + /* Disable ESPI training. MACs that can handle it enable it below. */ + writel(0, adapter->regs + A_ESPI_TRAIN); + + if (is_T2(adapter)) { + writel(V_OUT_OF_SYNC_COUNT(4) | + V_DIP2_PARITY_ERR_THRES(3) | + V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL); + writel(nports == 4 ? 0x200040 : 0x1000080, + adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); + } else + writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); + + if (mac_type == CHBT_MAC_PM3393) + espi_setup_for_pm3393(adapter); + else if (mac_type == CHBT_MAC_VSC7321) + espi_setup_for_vsc7321(adapter); + else if (mac_type == CHBT_MAC_IXF1010) { + status_enable_extra = F_INTEL1010MODE; + espi_setup_for_ixf1010(adapter, nports); + } else + return -1; + + writel(status_enable_extra | F_RXSTATUSENABLE, + adapter->regs + A_ESPI_FIFO_STATUS_ENABLE); + + if (is_T2(adapter)) { + tricn_init(adapter); + /* + * Always position the control at the 1st port egress IN + * (sop,eop) counter to reduce PIOs for T/N210 workaround. + */ + espi->misc_ctrl = readl(adapter->regs + A_ESPI_MISC_CONTROL); + espi->misc_ctrl &= ~MON_MASK; + espi->misc_ctrl |= F_MONITORED_DIRECTION; + if (adapter->params.nports == 1) + espi->misc_ctrl |= F_MONITORED_INTERFACE; + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + spin_lock_init(&espi->lock); + } + + return 0; +} + +void t1_espi_destroy(struct peespi *espi) +{ + kfree(espi); +} + +struct peespi *t1_espi_create(adapter_t *adapter) +{ + struct peespi *espi = kzalloc(sizeof(*espi), GFP_KERNEL); + + if (espi) + espi->adapter = adapter; + return espi; +} + +#if 0 +void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) +{ + struct peespi *espi = adapter->espi; + + if (!is_T2(adapter)) + return; + spin_lock(&espi->lock); + espi->misc_ctrl = (val & ~MON_MASK) | + (espi->misc_ctrl & MON_MASK); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + spin_unlock(&espi->lock); +} +#endif /* 0 */ + +u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) +{ + struct peespi *espi = adapter->espi; + u32 sel; + + if (!is_T2(adapter)) + return 0; + + sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); + if (!wait) { + if (!spin_trylock(&espi->lock)) + return 0; + } else + spin_lock(&espi->lock); + + if ((sel != (espi->misc_ctrl & MON_MASK))) { + writel(((espi->misc_ctrl & ~MON_MASK) | sel), + adapter->regs + A_ESPI_MISC_CONTROL); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + } else + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + spin_unlock(&espi->lock); + return sel; +} + +/* + * This function is for T204 only. + * compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in + * one shot, since there is no per port counter on the out side. + */ +int t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait) +{ + struct peespi *espi = adapter->espi; + u8 i, nport = (u8)adapter->params.nports; + + if (!wait) { + if (!spin_trylock(&espi->lock)) + return -1; + } else + spin_lock(&espi->lock); + + if ((espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION) { + espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) | + F_MONITORED_DIRECTION; + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + } + for (i = 0 ; i < nport; i++, valp++) { + if (i) { + writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i), + adapter->regs + A_ESPI_MISC_CONTROL); + } + *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + } + + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + spin_unlock(&espi->lock); + return 0; +} |