diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb/sge.c')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb/sge.c | 2156 |
1 files changed, 2156 insertions, 0 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb/sge.c b/drivers/net/ethernet/chelsio/cxgb/sge.c new file mode 100644 index 000000000..861edff5e --- /dev/null +++ b/drivers/net/ethernet/chelsio/cxgb/sge.c @@ -0,0 +1,2156 @@ +// SPDX-License-Identifier: GPL-2.0-only +/***************************************************************************** + * * + * File: sge.c * + * $Revision: 1.26 $ * + * $Date: 2005/06/21 18:29:48 $ * + * Description: * + * DMA engine. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/ktime.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/skbuff.h> +#include <linux/mm.h> +#include <linux/tcp.h> +#include <linux/ip.h> +#include <linux/in.h> +#include <linux/if_arp.h> +#include <linux/slab.h> +#include <linux/prefetch.h> + +#include "cpl5_cmd.h" +#include "sge.h" +#include "regs.h" +#include "espi.h" + +/* This belongs in if_ether.h */ +#define ETH_P_CPL5 0xf + +#define SGE_CMDQ_N 2 +#define SGE_FREELQ_N 2 +#define SGE_CMDQ0_E_N 1024 +#define SGE_CMDQ1_E_N 128 +#define SGE_FREEL_SIZE 4096 +#define SGE_JUMBO_FREEL_SIZE 512 +#define SGE_FREEL_REFILL_THRESH 16 +#define SGE_RESPQ_E_N 1024 +#define SGE_INTRTIMER_NRES 1000 +#define SGE_RX_SM_BUF_SIZE 1536 +#define SGE_TX_DESC_MAX_PLEN 16384 + +#define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4) + +/* + * Period of the TX buffer reclaim timer. This timer does not need to run + * frequently as TX buffers are usually reclaimed by new TX packets. + */ +#define TX_RECLAIM_PERIOD (HZ / 4) + +#define M_CMD_LEN 0x7fffffff +#define V_CMD_LEN(v) (v) +#define G_CMD_LEN(v) ((v) & M_CMD_LEN) +#define V_CMD_GEN1(v) ((v) << 31) +#define V_CMD_GEN2(v) (v) +#define F_CMD_DATAVALID (1 << 1) +#define F_CMD_SOP (1 << 2) +#define V_CMD_EOP(v) ((v) << 3) + +/* + * Command queue, receive buffer list, and response queue descriptors. + */ +#if defined(__BIG_ENDIAN_BITFIELD) +struct cmdQ_e { + u32 addr_lo; + u32 len_gen; + u32 flags; + u32 addr_hi; +}; + +struct freelQ_e { + u32 addr_lo; + u32 len_gen; + u32 gen2; + u32 addr_hi; +}; + +struct respQ_e { + u32 Qsleeping : 4; + u32 Cmdq1CreditReturn : 5; + u32 Cmdq1DmaComplete : 5; + u32 Cmdq0CreditReturn : 5; + u32 Cmdq0DmaComplete : 5; + u32 FreelistQid : 2; + u32 CreditValid : 1; + u32 DataValid : 1; + u32 Offload : 1; + u32 Eop : 1; + u32 Sop : 1; + u32 GenerationBit : 1; + u32 BufferLength; +}; +#elif defined(__LITTLE_ENDIAN_BITFIELD) +struct cmdQ_e { + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 flags; +}; + +struct freelQ_e { + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 gen2; +}; + +struct respQ_e { + u32 BufferLength; + u32 GenerationBit : 1; + u32 Sop : 1; + u32 Eop : 1; + u32 Offload : 1; + u32 DataValid : 1; + u32 CreditValid : 1; + u32 FreelistQid : 2; + u32 Cmdq0DmaComplete : 5; + u32 Cmdq0CreditReturn : 5; + u32 Cmdq1DmaComplete : 5; + u32 Cmdq1CreditReturn : 5; + u32 Qsleeping : 4; +} ; +#endif + +/* + * SW Context Command and Freelist Queue Descriptors + */ +struct cmdQ_ce { + struct sk_buff *skb; + DEFINE_DMA_UNMAP_ADDR(dma_addr); + DEFINE_DMA_UNMAP_LEN(dma_len); +}; + +struct freelQ_ce { + struct sk_buff *skb; + DEFINE_DMA_UNMAP_ADDR(dma_addr); + DEFINE_DMA_UNMAP_LEN(dma_len); +}; + +/* + * SW command, freelist and response rings + */ +struct cmdQ { + unsigned long status; /* HW DMA fetch status */ + unsigned int in_use; /* # of in-use command descriptors */ + unsigned int size; /* # of descriptors */ + unsigned int processed; /* total # of descs HW has processed */ + unsigned int cleaned; /* total # of descs SW has reclaimed */ + unsigned int stop_thres; /* SW TX queue suspend threshold */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u8 genbit; /* current generation (=valid) bit */ + u8 sop; /* is next entry start of packet? */ + struct cmdQ_e *entries; /* HW command descriptor Q */ + struct cmdQ_ce *centries; /* SW command context descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ + spinlock_t lock; /* Lock to protect cmdQ enqueuing */ +}; + +struct freelQ { + unsigned int credits; /* # of available RX buffers */ + unsigned int size; /* free list capacity */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u16 rx_buffer_size; /* Buffer size on this free list */ + u16 dma_offset; /* DMA offset to align IP headers */ + u16 recycleq_idx; /* skb recycle q to use */ + u8 genbit; /* current generation (=valid) bit */ + struct freelQ_e *entries; /* HW freelist descriptor Q */ + struct freelQ_ce *centries; /* SW freelist context descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ +}; + +struct respQ { + unsigned int credits; /* credits to be returned to SGE */ + unsigned int size; /* # of response Q descriptors */ + u16 cidx; /* consumer index (SW) */ + u8 genbit; /* current generation(=valid) bit */ + struct respQ_e *entries; /* HW response descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ +}; + +/* Bit flags for cmdQ.status */ +enum { + CMDQ_STAT_RUNNING = 1, /* fetch engine is running */ + CMDQ_STAT_LAST_PKT_DB = 2 /* last packet rung the doorbell */ +}; + +/* T204 TX SW scheduler */ + +/* Per T204 TX port */ +struct sched_port { + unsigned int avail; /* available bits - quota */ + unsigned int drain_bits_per_1024ns; /* drain rate */ + unsigned int speed; /* drain rate, mbps */ + unsigned int mtu; /* mtu size */ + struct sk_buff_head skbq; /* pending skbs */ +}; + +/* Per T204 device */ +struct sched { + ktime_t last_updated; /* last time quotas were computed */ + unsigned int max_avail; /* max bits to be sent to any port */ + unsigned int port; /* port index (round robin ports) */ + unsigned int num; /* num skbs in per port queues */ + struct sched_port p[MAX_NPORTS]; + struct tasklet_struct sched_tsk;/* tasklet used to run scheduler */ + struct sge *sge; +}; + +static void restart_sched(struct tasklet_struct *t); + + +/* + * Main SGE data structure + * + * Interrupts are handled by a single CPU and it is likely that on a MP system + * the application is migrated to another CPU. In that scenario, we try to + * separate the RX(in irq context) and TX state in order to decrease memory + * contention. + */ +struct sge { + struct adapter *adapter; /* adapter backpointer */ + struct net_device *netdev; /* netdevice backpointer */ + struct freelQ freelQ[SGE_FREELQ_N]; /* buffer free lists */ + struct respQ respQ; /* response Q */ + unsigned long stopped_tx_queues; /* bitmap of suspended Tx queues */ + unsigned int rx_pkt_pad; /* RX padding for L2 packets */ + unsigned int jumbo_fl; /* jumbo freelist Q index */ + unsigned int intrtimer_nres; /* no-resource interrupt timer */ + unsigned int fixed_intrtimer;/* non-adaptive interrupt timer */ + struct timer_list tx_reclaim_timer; /* reclaims TX buffers */ + struct timer_list espibug_timer; + unsigned long espibug_timeout; + struct sk_buff *espibug_skb[MAX_NPORTS]; + u32 sge_control; /* shadow value of sge control reg */ + struct sge_intr_counts stats; + struct sge_port_stats __percpu *port_stats[MAX_NPORTS]; + struct sched *tx_sched; + struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp; +}; + +static const u8 ch_mac_addr[ETH_ALEN] = { + 0x0, 0x7, 0x43, 0x0, 0x0, 0x0 +}; + +/* + * stop tasklet and free all pending skb's + */ +static void tx_sched_stop(struct sge *sge) +{ + struct sched *s = sge->tx_sched; + int i; + + tasklet_kill(&s->sched_tsk); + + for (i = 0; i < MAX_NPORTS; i++) + __skb_queue_purge(&s->p[s->port].skbq); +} + +/* + * t1_sched_update_parms() is called when the MTU or link speed changes. It + * re-computes scheduler parameters to scope with the change. + */ +unsigned int t1_sched_update_parms(struct sge *sge, unsigned int port, + unsigned int mtu, unsigned int speed) +{ + struct sched *s = sge->tx_sched; + struct sched_port *p = &s->p[port]; + unsigned int max_avail_segs; + + pr_debug("%s mtu=%d speed=%d\n", __func__, mtu, speed); + if (speed) + p->speed = speed; + if (mtu) + p->mtu = mtu; + + if (speed || mtu) { + unsigned long long drain = 1024ULL * p->speed * (p->mtu - 40); + do_div(drain, (p->mtu + 50) * 1000); + p->drain_bits_per_1024ns = (unsigned int) drain; + + if (p->speed < 1000) + p->drain_bits_per_1024ns = + 90 * p->drain_bits_per_1024ns / 100; + } + + if (board_info(sge->adapter)->board == CHBT_BOARD_CHT204) { + p->drain_bits_per_1024ns -= 16; + s->max_avail = max(4096U, p->mtu + 16 + 14 + 4); + max_avail_segs = max(1U, 4096 / (p->mtu - 40)); + } else { + s->max_avail = 16384; + max_avail_segs = max(1U, 9000 / (p->mtu - 40)); + } + + pr_debug("t1_sched_update_parms: mtu %u speed %u max_avail %u " + "max_avail_segs %u drain_bits_per_1024ns %u\n", p->mtu, + p->speed, s->max_avail, max_avail_segs, + p->drain_bits_per_1024ns); + + return max_avail_segs * (p->mtu - 40); +} + +#if 0 + +/* + * t1_sched_max_avail_bytes() tells the scheduler the maximum amount of + * data that can be pushed per port. + */ +void t1_sched_set_max_avail_bytes(struct sge *sge, unsigned int val) +{ + struct sched *s = sge->tx_sched; + unsigned int i; + + s->max_avail = val; + for (i = 0; i < MAX_NPORTS; i++) + t1_sched_update_parms(sge, i, 0, 0); +} + +/* + * t1_sched_set_drain_bits_per_us() tells the scheduler at which rate a port + * is draining. + */ +void t1_sched_set_drain_bits_per_us(struct sge *sge, unsigned int port, + unsigned int val) +{ + struct sched *s = sge->tx_sched; + struct sched_port *p = &s->p[port]; + p->drain_bits_per_1024ns = val * 1024 / 1000; + t1_sched_update_parms(sge, port, 0, 0); +} + +#endif /* 0 */ + +/* + * tx_sched_init() allocates resources and does basic initialization. + */ +static int tx_sched_init(struct sge *sge) +{ + struct sched *s; + int i; + + s = kzalloc(sizeof (struct sched), GFP_KERNEL); + if (!s) + return -ENOMEM; + + pr_debug("tx_sched_init\n"); + tasklet_setup(&s->sched_tsk, restart_sched); + s->sge = sge; + sge->tx_sched = s; + + for (i = 0; i < MAX_NPORTS; i++) { + skb_queue_head_init(&s->p[i].skbq); + t1_sched_update_parms(sge, i, 1500, 1000); + } + + return 0; +} + +/* + * sched_update_avail() computes the delta since the last time it was called + * and updates the per port quota (number of bits that can be sent to the any + * port). + */ +static inline int sched_update_avail(struct sge *sge) +{ + struct sched *s = sge->tx_sched; + ktime_t now = ktime_get(); + unsigned int i; + long long delta_time_ns; + + delta_time_ns = ktime_to_ns(ktime_sub(now, s->last_updated)); + + pr_debug("sched_update_avail delta=%lld\n", delta_time_ns); + if (delta_time_ns < 15000) + return 0; + + for (i = 0; i < MAX_NPORTS; i++) { + struct sched_port *p = &s->p[i]; + unsigned int delta_avail; + + delta_avail = (p->drain_bits_per_1024ns * delta_time_ns) >> 13; + p->avail = min(p->avail + delta_avail, s->max_avail); + } + + s->last_updated = now; + + return 1; +} + +/* + * sched_skb() is called from two different places. In the tx path, any + * packet generating load on an output port will call sched_skb() + * (skb != NULL). In addition, sched_skb() is called from the irq/soft irq + * context (skb == NULL). + * The scheduler only returns a skb (which will then be sent) if the + * length of the skb is <= the current quota of the output port. + */ +static struct sk_buff *sched_skb(struct sge *sge, struct sk_buff *skb, + unsigned int credits) +{ + struct sched *s = sge->tx_sched; + struct sk_buff_head *skbq; + unsigned int i, len, update = 1; + + pr_debug("sched_skb %p\n", skb); + if (!skb) { + if (!s->num) + return NULL; + } else { + skbq = &s->p[skb->dev->if_port].skbq; + __skb_queue_tail(skbq, skb); + s->num++; + skb = NULL; + } + + if (credits < MAX_SKB_FRAGS + 1) + goto out; + +again: + for (i = 0; i < MAX_NPORTS; i++) { + s->port = (s->port + 1) & (MAX_NPORTS - 1); + skbq = &s->p[s->port].skbq; + + skb = skb_peek(skbq); + + if (!skb) + continue; + + len = skb->len; + if (len <= s->p[s->port].avail) { + s->p[s->port].avail -= len; + s->num--; + __skb_unlink(skb, skbq); + goto out; + } + skb = NULL; + } + + if (update-- && sched_update_avail(sge)) + goto again; + +out: + /* If there are more pending skbs, we use the hardware to schedule us + * again. + */ + if (s->num && !skb) { + struct cmdQ *q = &sge->cmdQ[0]; + clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) { + set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + writel(F_CMDQ0_ENABLE, sge->adapter->regs + A_SG_DOORBELL); + } + } + pr_debug("sched_skb ret %p\n", skb); + + return skb; +} + +/* + * PIO to indicate that memory mapped Q contains valid descriptor(s). + */ +static inline void doorbell_pio(struct adapter *adapter, u32 val) +{ + wmb(); + writel(val, adapter->regs + A_SG_DOORBELL); +} + +/* + * Frees all RX buffers on the freelist Q. The caller must make sure that + * the SGE is turned off before calling this function. + */ +static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *q) +{ + unsigned int cidx = q->cidx; + + while (q->credits--) { + struct freelQ_ce *ce = &q->centries[cidx]; + + dma_unmap_single(&pdev->dev, dma_unmap_addr(ce, dma_addr), + dma_unmap_len(ce, dma_len), DMA_FROM_DEVICE); + dev_kfree_skb(ce->skb); + ce->skb = NULL; + if (++cidx == q->size) + cidx = 0; + } +} + +/* + * Free RX free list and response queue resources. + */ +static void free_rx_resources(struct sge *sge) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + if (sge->respQ.entries) { + size = sizeof(struct respQ_e) * sge->respQ.size; + dma_free_coherent(&pdev->dev, size, sge->respQ.entries, + sge->respQ.dma_addr); + } + + for (i = 0; i < SGE_FREELQ_N; i++) { + struct freelQ *q = &sge->freelQ[i]; + + if (q->centries) { + free_freelQ_buffers(pdev, q); + kfree(q->centries); + } + if (q->entries) { + size = sizeof(struct freelQ_e) * q->size; + dma_free_coherent(&pdev->dev, size, q->entries, + q->dma_addr); + } + } +} + +/* + * Allocates basic RX resources, consisting of memory mapped freelist Qs and a + * response queue. + */ +static int alloc_rx_resources(struct sge *sge, struct sge_params *p) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_FREELQ_N; i++) { + struct freelQ *q = &sge->freelQ[i]; + + q->genbit = 1; + q->size = p->freelQ_size[i]; + q->dma_offset = sge->rx_pkt_pad ? 0 : NET_IP_ALIGN; + size = sizeof(struct freelQ_e) * q->size; + q->entries = dma_alloc_coherent(&pdev->dev, size, + &q->dma_addr, GFP_KERNEL); + if (!q->entries) + goto err_no_mem; + + size = sizeof(struct freelQ_ce) * q->size; + q->centries = kzalloc(size, GFP_KERNEL); + if (!q->centries) + goto err_no_mem; + } + + /* + * Calculate the buffer sizes for the two free lists. FL0 accommodates + * regular sized Ethernet frames, FL1 is sized not to exceed 16K, + * including all the sk_buff overhead. + * + * Note: For T2 FL0 and FL1 are reversed. + */ + sge->freelQ[!sge->jumbo_fl].rx_buffer_size = SGE_RX_SM_BUF_SIZE + + sizeof(struct cpl_rx_data) + + sge->freelQ[!sge->jumbo_fl].dma_offset; + + size = (16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + + sge->freelQ[sge->jumbo_fl].rx_buffer_size = size; + + /* + * Setup which skb recycle Q should be used when recycling buffers from + * each free list. + */ + sge->freelQ[!sge->jumbo_fl].recycleq_idx = 0; + sge->freelQ[sge->jumbo_fl].recycleq_idx = 1; + + sge->respQ.genbit = 1; + sge->respQ.size = SGE_RESPQ_E_N; + sge->respQ.credits = 0; + size = sizeof(struct respQ_e) * sge->respQ.size; + sge->respQ.entries = + dma_alloc_coherent(&pdev->dev, size, &sge->respQ.dma_addr, + GFP_KERNEL); + if (!sge->respQ.entries) + goto err_no_mem; + return 0; + +err_no_mem: + free_rx_resources(sge); + return -ENOMEM; +} + +/* + * Reclaims n TX descriptors and frees the buffers associated with them. + */ +static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n) +{ + struct cmdQ_ce *ce; + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int cidx = q->cidx; + + q->in_use -= n; + ce = &q->centries[cidx]; + while (n--) { + if (likely(dma_unmap_len(ce, dma_len))) { + dma_unmap_single(&pdev->dev, + dma_unmap_addr(ce, dma_addr), + dma_unmap_len(ce, dma_len), + DMA_TO_DEVICE); + if (q->sop) + q->sop = 0; + } + if (ce->skb) { + dev_kfree_skb_any(ce->skb); + q->sop = 1; + } + ce++; + if (++cidx == q->size) { + cidx = 0; + ce = q->centries; + } + } + q->cidx = cidx; +} + +/* + * Free TX resources. + * + * Assumes that SGE is stopped and all interrupts are disabled. + */ +static void free_tx_resources(struct sge *sge) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_CMDQ_N; i++) { + struct cmdQ *q = &sge->cmdQ[i]; + + if (q->centries) { + if (q->in_use) + free_cmdQ_buffers(sge, q, q->in_use); + kfree(q->centries); + } + if (q->entries) { + size = sizeof(struct cmdQ_e) * q->size; + dma_free_coherent(&pdev->dev, size, q->entries, + q->dma_addr); + } + } +} + +/* + * Allocates basic TX resources, consisting of memory mapped command Qs. + */ +static int alloc_tx_resources(struct sge *sge, struct sge_params *p) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_CMDQ_N; i++) { + struct cmdQ *q = &sge->cmdQ[i]; + + q->genbit = 1; + q->sop = 1; + q->size = p->cmdQ_size[i]; + q->in_use = 0; + q->status = 0; + q->processed = q->cleaned = 0; + q->stop_thres = 0; + spin_lock_init(&q->lock); + size = sizeof(struct cmdQ_e) * q->size; + q->entries = dma_alloc_coherent(&pdev->dev, size, + &q->dma_addr, GFP_KERNEL); + if (!q->entries) + goto err_no_mem; + + size = sizeof(struct cmdQ_ce) * q->size; + q->centries = kzalloc(size, GFP_KERNEL); + if (!q->centries) + goto err_no_mem; + } + + /* + * CommandQ 0 handles Ethernet and TOE packets, while queue 1 is TOE + * only. For queue 0 set the stop threshold so we can handle one more + * packet from each port, plus reserve an additional 24 entries for + * Ethernet packets only. Queue 1 never suspends nor do we reserve + * space for Ethernet packets. + */ + sge->cmdQ[0].stop_thres = sge->adapter->params.nports * + (MAX_SKB_FRAGS + 1); + return 0; + +err_no_mem: + free_tx_resources(sge); + return -ENOMEM; +} + +static inline void setup_ring_params(struct adapter *adapter, u64 addr, + u32 size, int base_reg_lo, + int base_reg_hi, int size_reg) +{ + writel((u32)addr, adapter->regs + base_reg_lo); + writel(addr >> 32, adapter->regs + base_reg_hi); + writel(size, adapter->regs + size_reg); +} + +/* + * Enable/disable VLAN acceleration. + */ +void t1_vlan_mode(struct adapter *adapter, netdev_features_t features) +{ + struct sge *sge = adapter->sge; + + if (features & NETIF_F_HW_VLAN_CTAG_RX) + sge->sge_control |= F_VLAN_XTRACT; + else + sge->sge_control &= ~F_VLAN_XTRACT; + if (adapter->open_device_map) { + writel(sge->sge_control, adapter->regs + A_SG_CONTROL); + readl(adapter->regs + A_SG_CONTROL); /* flush */ + } +} + +/* + * Programs the various SGE registers. However, the engine is not yet enabled, + * but sge->sge_control is setup and ready to go. + */ +static void configure_sge(struct sge *sge, struct sge_params *p) +{ + struct adapter *ap = sge->adapter; + + writel(0, ap->regs + A_SG_CONTROL); + setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].size, + A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE); + setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].size, + A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE); + setup_ring_params(ap, sge->freelQ[0].dma_addr, + sge->freelQ[0].size, A_SG_FL0BASELWR, + A_SG_FL0BASEUPR, A_SG_FL0SIZE); + setup_ring_params(ap, sge->freelQ[1].dma_addr, + sge->freelQ[1].size, A_SG_FL1BASELWR, + A_SG_FL1BASEUPR, A_SG_FL1SIZE); + + /* The threshold comparison uses <. */ + writel(SGE_RX_SM_BUF_SIZE + 1, ap->regs + A_SG_FLTHRESHOLD); + + setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.size, + A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); + writel((u32)sge->respQ.size - 1, ap->regs + A_SG_RSPQUEUECREDIT); + + sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE | + F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE | + V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE | + V_RX_PKT_OFFSET(sge->rx_pkt_pad); + +#if defined(__BIG_ENDIAN_BITFIELD) + sge->sge_control |= F_ENABLE_BIG_ENDIAN; +#endif + + /* Initialize no-resource timer */ + sge->intrtimer_nres = SGE_INTRTIMER_NRES * core_ticks_per_usec(ap); + + t1_sge_set_coalesce_params(sge, p); +} + +/* + * Return the payload capacity of the jumbo free-list buffers. + */ +static inline unsigned int jumbo_payload_capacity(const struct sge *sge) +{ + return sge->freelQ[sge->jumbo_fl].rx_buffer_size - + sge->freelQ[sge->jumbo_fl].dma_offset - + sizeof(struct cpl_rx_data); +} + +/* + * Frees all SGE related resources and the sge structure itself + */ +void t1_sge_destroy(struct sge *sge) +{ + int i; + + for_each_port(sge->adapter, i) + free_percpu(sge->port_stats[i]); + + kfree(sge->tx_sched); + free_tx_resources(sge); + free_rx_resources(sge); + kfree(sge); +} + +/* + * Allocates new RX buffers on the freelist Q (and tracks them on the freelist + * context Q) until the Q is full or alloc_skb fails. + * + * It is possible that the generation bits already match, indicating that the + * buffer is already valid and nothing needs to be done. This happens when we + * copied a received buffer into a new sk_buff during the interrupt processing. + * + * If the SGE doesn't automatically align packets properly (!sge->rx_pkt_pad), + * we specify a RX_OFFSET in order to make sure that the IP header is 4B + * aligned. + */ +static void refill_free_list(struct sge *sge, struct freelQ *q) +{ + struct pci_dev *pdev = sge->adapter->pdev; + struct freelQ_ce *ce = &q->centries[q->pidx]; + struct freelQ_e *e = &q->entries[q->pidx]; + unsigned int dma_len = q->rx_buffer_size - q->dma_offset; + + while (q->credits < q->size) { + struct sk_buff *skb; + dma_addr_t mapping; + + skb = dev_alloc_skb(q->rx_buffer_size); + if (!skb) + break; + + skb_reserve(skb, q->dma_offset); + mapping = dma_map_single(&pdev->dev, skb->data, dma_len, + DMA_FROM_DEVICE); + skb_reserve(skb, sge->rx_pkt_pad); + + ce->skb = skb; + dma_unmap_addr_set(ce, dma_addr, mapping); + dma_unmap_len_set(ce, dma_len, dma_len); + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(dma_len) | V_CMD_GEN1(q->genbit); + wmb(); + e->gen2 = V_CMD_GEN2(q->genbit); + + e++; + ce++; + if (++q->pidx == q->size) { + q->pidx = 0; + q->genbit ^= 1; + ce = q->centries; + e = q->entries; + } + q->credits++; + } +} + +/* + * Calls refill_free_list for both free lists. If we cannot fill at least 1/4 + * of both rings, we go into 'few interrupt mode' in order to give the system + * time to free up resources. + */ +static void freelQs_empty(struct sge *sge) +{ + struct adapter *adapter = sge->adapter; + u32 irq_reg = readl(adapter->regs + A_SG_INT_ENABLE); + u32 irqholdoff_reg; + + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + if (sge->freelQ[0].credits > (sge->freelQ[0].size >> 2) && + sge->freelQ[1].credits > (sge->freelQ[1].size >> 2)) { + irq_reg |= F_FL_EXHAUSTED; + irqholdoff_reg = sge->fixed_intrtimer; + } else { + /* Clear the F_FL_EXHAUSTED interrupts for now */ + irq_reg &= ~F_FL_EXHAUSTED; + irqholdoff_reg = sge->intrtimer_nres; + } + writel(irqholdoff_reg, adapter->regs + A_SG_INTRTIMER); + writel(irq_reg, adapter->regs + A_SG_INT_ENABLE); + + /* We reenable the Qs to force a freelist GTS interrupt later */ + doorbell_pio(adapter, F_FL0_ENABLE | F_FL1_ENABLE); +} + +#define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA) +#define SGE_INT_FATAL (F_RESPQ_OVERFLOW | F_PACKET_TOO_BIG | F_PACKET_MISMATCH) +#define SGE_INT_ENABLE (F_RESPQ_EXHAUSTED | F_RESPQ_OVERFLOW | \ + F_FL_EXHAUSTED | F_PACKET_TOO_BIG | F_PACKET_MISMATCH) + +/* + * Disable SGE Interrupts + */ +void t1_sge_intr_disable(struct sge *sge) +{ + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); + + writel(val & ~SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); + writel(0, sge->adapter->regs + A_SG_INT_ENABLE); +} + +/* + * Enable SGE interrupts. + */ +void t1_sge_intr_enable(struct sge *sge) +{ + u32 en = SGE_INT_ENABLE; + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); + + if (sge->adapter->port[0].dev->hw_features & NETIF_F_TSO) + en &= ~F_PACKET_TOO_BIG; + writel(en, sge->adapter->regs + A_SG_INT_ENABLE); + writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); +} + +/* + * Clear SGE interrupts. + */ +void t1_sge_intr_clear(struct sge *sge) +{ + writel(SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_CAUSE); + writel(0xffffffff, sge->adapter->regs + A_SG_INT_CAUSE); +} + +/* + * SGE 'Error' interrupt handler + */ +bool t1_sge_intr_error_handler(struct sge *sge) +{ + struct adapter *adapter = sge->adapter; + u32 cause = readl(adapter->regs + A_SG_INT_CAUSE); + bool wake = false; + + if (adapter->port[0].dev->hw_features & NETIF_F_TSO) + cause &= ~F_PACKET_TOO_BIG; + if (cause & F_RESPQ_EXHAUSTED) + sge->stats.respQ_empty++; + if (cause & F_RESPQ_OVERFLOW) { + sge->stats.respQ_overflow++; + pr_alert("%s: SGE response queue overflow\n", + adapter->name); + } + if (cause & F_FL_EXHAUSTED) { + sge->stats.freelistQ_empty++; + freelQs_empty(sge); + } + if (cause & F_PACKET_TOO_BIG) { + sge->stats.pkt_too_big++; + pr_alert("%s: SGE max packet size exceeded\n", + adapter->name); + } + if (cause & F_PACKET_MISMATCH) { + sge->stats.pkt_mismatch++; + pr_alert("%s: SGE packet mismatch\n", adapter->name); + } + if (cause & SGE_INT_FATAL) { + t1_interrupts_disable(adapter); + adapter->pending_thread_intr |= F_PL_INTR_SGE_ERR; + wake = true; + } + + writel(cause, adapter->regs + A_SG_INT_CAUSE); + return wake; +} + +const struct sge_intr_counts *t1_sge_get_intr_counts(const struct sge *sge) +{ + return &sge->stats; +} + +void t1_sge_get_port_stats(const struct sge *sge, int port, + struct sge_port_stats *ss) +{ + int cpu; + + memset(ss, 0, sizeof(*ss)); + for_each_possible_cpu(cpu) { + struct sge_port_stats *st = per_cpu_ptr(sge->port_stats[port], cpu); + + ss->rx_cso_good += st->rx_cso_good; + ss->tx_cso += st->tx_cso; + ss->tx_tso += st->tx_tso; + ss->tx_need_hdrroom += st->tx_need_hdrroom; + ss->vlan_xtract += st->vlan_xtract; + ss->vlan_insert += st->vlan_insert; + } +} + +/** + * recycle_fl_buf - recycle a free list buffer + * @fl: the free list + * @idx: index of buffer to recycle + * + * Recycles the specified buffer on the given free list by adding it at + * the next available slot on the list. + */ +static void recycle_fl_buf(struct freelQ *fl, int idx) +{ + struct freelQ_e *from = &fl->entries[idx]; + struct freelQ_e *to = &fl->entries[fl->pidx]; + + fl->centries[fl->pidx] = fl->centries[idx]; + to->addr_lo = from->addr_lo; + to->addr_hi = from->addr_hi; + to->len_gen = G_CMD_LEN(from->len_gen) | V_CMD_GEN1(fl->genbit); + wmb(); + to->gen2 = V_CMD_GEN2(fl->genbit); + fl->credits++; + + if (++fl->pidx == fl->size) { + fl->pidx = 0; + fl->genbit ^= 1; + } +} + +static int copybreak __read_mostly = 256; +module_param(copybreak, int, 0); +MODULE_PARM_DESC(copybreak, "Receive copy threshold"); + +/** + * get_packet - return the next ingress packet buffer + * @adapter: the adapter that received the packet + * @fl: the SGE free list holding the packet + * @len: the actual packet length, excluding any SGE padding + * + * Get the next packet from a free list and complete setup of the + * sk_buff. If the packet is small we make a copy and recycle the + * original buffer, otherwise we use the original buffer itself. If a + * positive drop threshold is supplied packets are dropped and their + * buffers recycled if (a) the number of remaining buffers is under the + * threshold and the packet is too big to copy, or (b) the packet should + * be copied but there is no memory for the copy. + */ +static inline struct sk_buff *get_packet(struct adapter *adapter, + struct freelQ *fl, unsigned int len) +{ + const struct freelQ_ce *ce = &fl->centries[fl->cidx]; + struct pci_dev *pdev = adapter->pdev; + struct sk_buff *skb; + + if (len < copybreak) { + skb = napi_alloc_skb(&adapter->napi, len); + if (!skb) + goto use_orig_buf; + + skb_put(skb, len); + dma_sync_single_for_cpu(&pdev->dev, + dma_unmap_addr(ce, dma_addr), + dma_unmap_len(ce, dma_len), + DMA_FROM_DEVICE); + skb_copy_from_linear_data(ce->skb, skb->data, len); + dma_sync_single_for_device(&pdev->dev, + dma_unmap_addr(ce, dma_addr), + dma_unmap_len(ce, dma_len), + DMA_FROM_DEVICE); + recycle_fl_buf(fl, fl->cidx); + return skb; + } + +use_orig_buf: + if (fl->credits < 2) { + recycle_fl_buf(fl, fl->cidx); + return NULL; + } + + dma_unmap_single(&pdev->dev, dma_unmap_addr(ce, dma_addr), + dma_unmap_len(ce, dma_len), DMA_FROM_DEVICE); + skb = ce->skb; + prefetch(skb->data); + + skb_put(skb, len); + return skb; +} + +/** + * unexpected_offload - handle an unexpected offload packet + * @adapter: the adapter + * @fl: the free list that received the packet + * + * Called when we receive an unexpected offload packet (e.g., the TOE + * function is disabled or the card is a NIC). Prints a message and + * recycles the buffer. + */ +static void unexpected_offload(struct adapter *adapter, struct freelQ *fl) +{ + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + struct sk_buff *skb = ce->skb; + + dma_sync_single_for_cpu(&adapter->pdev->dev, + dma_unmap_addr(ce, dma_addr), + dma_unmap_len(ce, dma_len), DMA_FROM_DEVICE); + pr_err("%s: unexpected offload packet, cmd %u\n", + adapter->name, *skb->data); + recycle_fl_buf(fl, fl->cidx); +} + +/* + * T1/T2 SGE limits the maximum DMA size per TX descriptor to + * SGE_TX_DESC_MAX_PLEN (16KB). If the PAGE_SIZE is larger than 16KB, the + * stack might send more than SGE_TX_DESC_MAX_PLEN in a contiguous manner. + * Note that the *_large_page_tx_descs stuff will be optimized out when + * PAGE_SIZE <= SGE_TX_DESC_MAX_PLEN. + * + * compute_large_page_descs() computes how many additional descriptors are + * required to break down the stack's request. + */ +static inline unsigned int compute_large_page_tx_descs(struct sk_buff *skb) +{ + unsigned int count = 0; + + if (PAGE_SIZE > SGE_TX_DESC_MAX_PLEN) { + unsigned int nfrags = skb_shinfo(skb)->nr_frags; + unsigned int i, len = skb_headlen(skb); + while (len > SGE_TX_DESC_MAX_PLEN) { + count++; + len -= SGE_TX_DESC_MAX_PLEN; + } + for (i = 0; nfrags--; i++) { + const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + len = skb_frag_size(frag); + while (len > SGE_TX_DESC_MAX_PLEN) { + count++; + len -= SGE_TX_DESC_MAX_PLEN; + } + } + } + return count; +} + +/* + * Write a cmdQ entry. + * + * Since this function writes the 'flags' field, it must not be used to + * write the first cmdQ entry. + */ +static inline void write_tx_desc(struct cmdQ_e *e, dma_addr_t mapping, + unsigned int len, unsigned int gen, + unsigned int eop) +{ + BUG_ON(len > SGE_TX_DESC_MAX_PLEN); + + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(len) | V_CMD_GEN1(gen); + e->flags = F_CMD_DATAVALID | V_CMD_EOP(eop) | V_CMD_GEN2(gen); +} + +/* + * See comment for previous function. + * + * write_tx_descs_large_page() writes additional SGE tx descriptors if + * *desc_len exceeds HW's capability. + */ +static inline unsigned int write_large_page_tx_descs(unsigned int pidx, + struct cmdQ_e **e, + struct cmdQ_ce **ce, + unsigned int *gen, + dma_addr_t *desc_mapping, + unsigned int *desc_len, + unsigned int nfrags, + struct cmdQ *q) +{ + if (PAGE_SIZE > SGE_TX_DESC_MAX_PLEN) { + struct cmdQ_e *e1 = *e; + struct cmdQ_ce *ce1 = *ce; + + while (*desc_len > SGE_TX_DESC_MAX_PLEN) { + *desc_len -= SGE_TX_DESC_MAX_PLEN; + write_tx_desc(e1, *desc_mapping, SGE_TX_DESC_MAX_PLEN, + *gen, nfrags == 0 && *desc_len == 0); + ce1->skb = NULL; + dma_unmap_len_set(ce1, dma_len, 0); + *desc_mapping += SGE_TX_DESC_MAX_PLEN; + if (*desc_len) { + ce1++; + e1++; + if (++pidx == q->size) { + pidx = 0; + *gen ^= 1; + ce1 = q->centries; + e1 = q->entries; + } + } + } + *e = e1; + *ce = ce1; + } + return pidx; +} + +/* + * Write the command descriptors to transmit the given skb starting at + * descriptor pidx with the given generation. + */ +static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb, + unsigned int pidx, unsigned int gen, + struct cmdQ *q) +{ + dma_addr_t mapping, desc_mapping; + struct cmdQ_e *e, *e1; + struct cmdQ_ce *ce; + unsigned int i, flags, first_desc_len, desc_len, + nfrags = skb_shinfo(skb)->nr_frags; + + e = e1 = &q->entries[pidx]; + ce = &q->centries[pidx]; + + mapping = dma_map_single(&adapter->pdev->dev, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + + desc_mapping = mapping; + desc_len = skb_headlen(skb); + + flags = F_CMD_DATAVALID | F_CMD_SOP | + V_CMD_EOP(nfrags == 0 && desc_len <= SGE_TX_DESC_MAX_PLEN) | + V_CMD_GEN2(gen); + first_desc_len = (desc_len <= SGE_TX_DESC_MAX_PLEN) ? + desc_len : SGE_TX_DESC_MAX_PLEN; + e->addr_lo = (u32)desc_mapping; + e->addr_hi = (u64)desc_mapping >> 32; + e->len_gen = V_CMD_LEN(first_desc_len) | V_CMD_GEN1(gen); + ce->skb = NULL; + dma_unmap_len_set(ce, dma_len, 0); + + if (PAGE_SIZE > SGE_TX_DESC_MAX_PLEN && + desc_len > SGE_TX_DESC_MAX_PLEN) { + desc_mapping += first_desc_len; + desc_len -= first_desc_len; + e1++; + ce++; + if (++pidx == q->size) { + pidx = 0; + gen ^= 1; + e1 = q->entries; + ce = q->centries; + } + pidx = write_large_page_tx_descs(pidx, &e1, &ce, &gen, + &desc_mapping, &desc_len, + nfrags, q); + + if (likely(desc_len)) + write_tx_desc(e1, desc_mapping, desc_len, gen, + nfrags == 0); + } + + ce->skb = NULL; + dma_unmap_addr_set(ce, dma_addr, mapping); + dma_unmap_len_set(ce, dma_len, skb_headlen(skb)); + + for (i = 0; nfrags--; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + e1++; + ce++; + if (++pidx == q->size) { + pidx = 0; + gen ^= 1; + e1 = q->entries; + ce = q->centries; + } + + mapping = skb_frag_dma_map(&adapter->pdev->dev, frag, 0, + skb_frag_size(frag), DMA_TO_DEVICE); + desc_mapping = mapping; + desc_len = skb_frag_size(frag); + + pidx = write_large_page_tx_descs(pidx, &e1, &ce, &gen, + &desc_mapping, &desc_len, + nfrags, q); + if (likely(desc_len)) + write_tx_desc(e1, desc_mapping, desc_len, gen, + nfrags == 0); + ce->skb = NULL; + dma_unmap_addr_set(ce, dma_addr, mapping); + dma_unmap_len_set(ce, dma_len, skb_frag_size(frag)); + } + ce->skb = skb; + wmb(); + e->flags = flags; +} + +/* + * Clean up completed Tx buffers. + */ +static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q) +{ + unsigned int reclaim = q->processed - q->cleaned; + + if (reclaim) { + pr_debug("reclaim_completed_tx processed:%d cleaned:%d\n", + q->processed, q->cleaned); + free_cmdQ_buffers(sge, q, reclaim); + q->cleaned += reclaim; + } +} + +/* + * Called from tasklet. Checks the scheduler for any + * pending skbs that can be sent. + */ +static void restart_sched(struct tasklet_struct *t) +{ + struct sched *s = from_tasklet(s, t, sched_tsk); + struct sge *sge = s->sge; + struct adapter *adapter = sge->adapter; + struct cmdQ *q = &sge->cmdQ[0]; + struct sk_buff *skb; + unsigned int credits, queued_skb = 0; + + spin_lock(&q->lock); + reclaim_completed_tx(sge, q); + + credits = q->size - q->in_use; + pr_debug("restart_sched credits=%d\n", credits); + while ((skb = sched_skb(sge, NULL, credits)) != NULL) { + unsigned int genbit, pidx, count; + count = 1 + skb_shinfo(skb)->nr_frags; + count += compute_large_page_tx_descs(skb); + q->in_use += count; + genbit = q->genbit; + pidx = q->pidx; + q->pidx += count; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->genbit ^= 1; + } + write_tx_descs(adapter, skb, pidx, genbit, q); + credits = q->size - q->in_use; + queued_skb = 1; + } + + if (queued_skb) { + clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) { + set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + } + spin_unlock(&q->lock); +} + +/** + * sge_rx - process an ingress ethernet packet + * @sge: the sge structure + * @fl: the free list that contains the packet buffer + * @len: the packet length + * + * Process an ingress ethernet packet and deliver it to the stack. + */ +static void sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len) +{ + struct sk_buff *skb; + const struct cpl_rx_pkt *p; + struct adapter *adapter = sge->adapter; + struct sge_port_stats *st; + struct net_device *dev; + + skb = get_packet(adapter, fl, len - sge->rx_pkt_pad); + if (unlikely(!skb)) { + sge->stats.rx_drops++; + return; + } + + p = (const struct cpl_rx_pkt *) skb->data; + if (p->iff >= adapter->params.nports) { + kfree_skb(skb); + return; + } + __skb_pull(skb, sizeof(*p)); + + st = this_cpu_ptr(sge->port_stats[p->iff]); + dev = adapter->port[p->iff].dev; + + skb->protocol = eth_type_trans(skb, dev); + if ((dev->features & NETIF_F_RXCSUM) && p->csum == 0xffff && + skb->protocol == htons(ETH_P_IP) && + (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) { + ++st->rx_cso_good; + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else + skb_checksum_none_assert(skb); + + if (p->vlan_valid) { + st->vlan_xtract++; + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(p->vlan)); + } + netif_receive_skb(skb); +} + +/* + * Returns true if a command queue has enough available descriptors that + * we can resume Tx operation after temporarily disabling its packet queue. + */ +static inline int enough_free_Tx_descs(const struct cmdQ *q) +{ + unsigned int r = q->processed - q->cleaned; + + return q->in_use - r < (q->size >> 1); +} + +/* + * Called when sufficient space has become available in the SGE command queues + * after the Tx packet schedulers have been suspended to restart the Tx path. + */ +static void restart_tx_queues(struct sge *sge) +{ + struct adapter *adap = sge->adapter; + int i; + + if (!enough_free_Tx_descs(&sge->cmdQ[0])) + return; + + for_each_port(adap, i) { + struct net_device *nd = adap->port[i].dev; + + if (test_and_clear_bit(nd->if_port, &sge->stopped_tx_queues) && + netif_running(nd)) { + sge->stats.cmdQ_restarted[2]++; + netif_wake_queue(nd); + } + } +} + +/* + * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0 + * information. + */ +static unsigned int update_tx_info(struct adapter *adapter, + unsigned int flags, + unsigned int pr0) +{ + struct sge *sge = adapter->sge; + struct cmdQ *cmdq = &sge->cmdQ[0]; + + cmdq->processed += pr0; + if (flags & (F_FL0_ENABLE | F_FL1_ENABLE)) { + freelQs_empty(sge); + flags &= ~(F_FL0_ENABLE | F_FL1_ENABLE); + } + if (flags & F_CMDQ0_ENABLE) { + clear_bit(CMDQ_STAT_RUNNING, &cmdq->status); + + if (cmdq->cleaned + cmdq->in_use != cmdq->processed && + !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB, &cmdq->status)) { + set_bit(CMDQ_STAT_RUNNING, &cmdq->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + if (sge->tx_sched) + tasklet_hi_schedule(&sge->tx_sched->sched_tsk); + + flags &= ~F_CMDQ0_ENABLE; + } + + if (unlikely(sge->stopped_tx_queues != 0)) + restart_tx_queues(sge); + + return flags; +} + +/* + * Process SGE responses, up to the supplied budget. Returns the number of + * responses processed. A negative budget is effectively unlimited. + */ +static int process_responses(struct adapter *adapter, int budget) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + struct respQ_e *e = &q->entries[q->cidx]; + int done = 0; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; + + while (done < budget && e->GenerationBit == q->genbit) { + flags |= e->Qsleeping; + + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + /* We batch updates to the TX side to avoid cacheline + * ping-pong of TX state information on MP where the sender + * might run on a different CPU than this function... + */ + if (unlikely((flags & F_CMDQ0_ENABLE) || cmdq_processed[0] > 64)) { + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + cmdq_processed[0] = 0; + } + + if (unlikely(cmdq_processed[1] > 16)) { + sge->cmdQ[1].processed += cmdq_processed[1]; + cmdq_processed[1] = 0; + } + + if (likely(e->DataValid)) { + struct freelQ *fl = &sge->freelQ[e->FreelistQid]; + + BUG_ON(!e->Sop || !e->Eop); + if (unlikely(e->Offload)) + unexpected_offload(adapter, fl); + else + sge_rx(sge, fl, e->BufferLength); + + ++done; + + /* + * Note: this depends on each packet consuming a + * single free-list buffer; cf. the BUG above. + */ + if (++fl->cidx == fl->size) + fl->cidx = 0; + prefetch(fl->centries[fl->cidx].skb); + + if (unlikely(--fl->credits < + fl->size - SGE_FREEL_REFILL_THRESH)) + refill_free_list(sge, fl); + } else + sge->stats.pure_rsps++; + + e++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; + } + prefetch(e); + + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; + } + } + + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; + + return done; +} + +static inline int responses_pending(const struct adapter *adapter) +{ + const struct respQ *Q = &adapter->sge->respQ; + const struct respQ_e *e = &Q->entries[Q->cidx]; + + return e->GenerationBit == Q->genbit; +} + +/* + * A simpler version of process_responses() that handles only pure (i.e., + * non data-carrying) responses. Such respones are too light-weight to justify + * calling a softirq when using NAPI, so we handle them specially in hard + * interrupt context. The function is called with a pointer to a response, + * which the caller must ensure is a valid pure response. Returns 1 if it + * encounters a valid data-carrying response, 0 otherwise. + */ +static int process_pure_responses(struct adapter *adapter) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + struct respQ_e *e = &q->entries[q->cidx]; + const struct freelQ *fl = &sge->freelQ[e->FreelistQid]; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; + + prefetch(fl->centries[fl->cidx].skb); + if (e->DataValid) + return 1; + + do { + flags |= e->Qsleeping; + + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + e++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; + } + prefetch(e); + + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; + } + sge->stats.pure_rsps++; + } while (e->GenerationBit == q->genbit && !e->DataValid); + + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; + + return e->GenerationBit == q->genbit; +} + +/* + * Handler for new data events when using NAPI. This does not need any locking + * or protection from interrupts as data interrupts are off at this point and + * other adapter interrupts do not interfere. + */ +int t1_poll(struct napi_struct *napi, int budget) +{ + struct adapter *adapter = container_of(napi, struct adapter, napi); + int work_done = process_responses(adapter, budget); + + if (likely(work_done < budget)) { + napi_complete_done(napi, work_done); + writel(adapter->sge->respQ.cidx, + adapter->regs + A_SG_SLEEPING); + } + return work_done; +} + +irqreturn_t t1_interrupt_thread(int irq, void *data) +{ + struct adapter *adapter = data; + u32 pending_thread_intr; + + spin_lock_irq(&adapter->async_lock); + pending_thread_intr = adapter->pending_thread_intr; + adapter->pending_thread_intr = 0; + spin_unlock_irq(&adapter->async_lock); + + if (!pending_thread_intr) + return IRQ_NONE; + + if (pending_thread_intr & F_PL_INTR_EXT) + t1_elmer0_ext_intr_handler(adapter); + + /* This error is fatal, interrupts remain off */ + if (pending_thread_intr & F_PL_INTR_SGE_ERR) { + pr_alert("%s: encountered fatal error, operation suspended\n", + adapter->name); + t1_sge_stop(adapter->sge); + return IRQ_HANDLED; + } + + spin_lock_irq(&adapter->async_lock); + adapter->slow_intr_mask |= F_PL_INTR_EXT; + + writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE); + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); + spin_unlock_irq(&adapter->async_lock); + + return IRQ_HANDLED; +} + +irqreturn_t t1_interrupt(int irq, void *data) +{ + struct adapter *adapter = data; + struct sge *sge = adapter->sge; + irqreturn_t handled; + + if (likely(responses_pending(adapter))) { + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); + + if (napi_schedule_prep(&adapter->napi)) { + if (process_pure_responses(adapter)) + __napi_schedule(&adapter->napi); + else { + /* no data, no NAPI needed */ + writel(sge->respQ.cidx, adapter->regs + A_SG_SLEEPING); + /* undo schedule_prep */ + napi_enable(&adapter->napi); + } + } + return IRQ_HANDLED; + } + + spin_lock(&adapter->async_lock); + handled = t1_slow_intr_handler(adapter); + spin_unlock(&adapter->async_lock); + + if (handled == IRQ_NONE) + sge->stats.unhandled_irqs++; + + return handled; +} + +/* + * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. + * + * The code figures out how many entries the sk_buff will require in the + * cmdQ and updates the cmdQ data structure with the state once the enqueue + * has complete. Then, it doesn't access the global structure anymore, but + * uses the corresponding fields on the stack. In conjunction with a spinlock + * around that code, we can make the function reentrant without holding the + * lock when we actually enqueue (which might be expensive, especially on + * architectures with IO MMUs). + * + * This runs with softirqs disabled. + */ +static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *dev) +{ + struct sge *sge = adapter->sge; + struct cmdQ *q = &sge->cmdQ[qid]; + unsigned int credits, pidx, genbit, count, use_sched_skb = 0; + + spin_lock(&q->lock); + + reclaim_completed_tx(sge, q); + + pidx = q->pidx; + credits = q->size - q->in_use; + count = 1 + skb_shinfo(skb)->nr_frags; + count += compute_large_page_tx_descs(skb); + + /* Ethernet packet */ + if (unlikely(credits < count)) { + if (!netif_queue_stopped(dev)) { + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + sge->stats.cmdQ_full[2]++; + pr_err("%s: Tx ring full while queue awake!\n", + adapter->name); + } + spin_unlock(&q->lock); + return NETDEV_TX_BUSY; + } + + if (unlikely(credits - count < q->stop_thres)) { + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + sge->stats.cmdQ_full[2]++; + } + + /* T204 cmdQ0 skbs that are destined for a certain port have to go + * through the scheduler. + */ + if (sge->tx_sched && !qid && skb->dev) { +use_sched: + use_sched_skb = 1; + /* Note that the scheduler might return a different skb than + * the one passed in. + */ + skb = sched_skb(sge, skb, credits); + if (!skb) { + spin_unlock(&q->lock); + return NETDEV_TX_OK; + } + pidx = q->pidx; + count = 1 + skb_shinfo(skb)->nr_frags; + count += compute_large_page_tx_descs(skb); + } + + q->in_use += count; + genbit = q->genbit; + pidx = q->pidx; + q->pidx += count; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->genbit ^= 1; + } + spin_unlock(&q->lock); + + write_tx_descs(adapter, skb, pidx, genbit, q); + + /* + * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring + * the doorbell if the Q is asleep. There is a natural race, where + * the hardware is going to sleep just after we checked, however, + * then the interrupt handler will detect the outstanding TX packet + * and ring the doorbell for us. + */ + if (qid) + doorbell_pio(adapter, F_CMDQ1_ENABLE); + else { + clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) { + set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + } + + if (use_sched_skb) { + if (spin_trylock(&q->lock)) { + credits = q->size - q->in_use; + skb = NULL; + goto use_sched; + } + } + return NETDEV_TX_OK; +} + +#define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14)) + +/* + * eth_hdr_len - return the length of an Ethernet header + * @data: pointer to the start of the Ethernet header + * + * Returns the length of an Ethernet header, including optional VLAN tag. + */ +static inline int eth_hdr_len(const void *data) +{ + const struct ethhdr *e = data; + + return e->h_proto == htons(ETH_P_8021Q) ? VLAN_ETH_HLEN : ETH_HLEN; +} + +/* + * Adds the CPL header to the sk_buff and passes it to t1_sge_tx. + */ +netdev_tx_t t1_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct adapter *adapter = dev->ml_priv; + struct sge *sge = adapter->sge; + struct sge_port_stats *st = this_cpu_ptr(sge->port_stats[dev->if_port]); + struct cpl_tx_pkt *cpl; + struct sk_buff *orig_skb = skb; + int ret; + + if (skb->protocol == htons(ETH_P_CPL5)) + goto send; + + /* + * We are using a non-standard hard_header_len. + * Allocate more header room in the rare cases it is not big enough. + */ + if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) { + skb = skb_realloc_headroom(skb, sizeof(struct cpl_tx_pkt_lso)); + ++st->tx_need_hdrroom; + dev_kfree_skb_any(orig_skb); + if (!skb) + return NETDEV_TX_OK; + } + + if (skb_shinfo(skb)->gso_size) { + int eth_type; + struct cpl_tx_pkt_lso *hdr; + + ++st->tx_tso; + + eth_type = skb_network_offset(skb) == ETH_HLEN ? + CPL_ETH_II : CPL_ETH_II_VLAN; + + hdr = skb_push(skb, sizeof(*hdr)); + hdr->opcode = CPL_TX_PKT_LSO; + hdr->ip_csum_dis = hdr->l4_csum_dis = 0; + hdr->ip_hdr_words = ip_hdr(skb)->ihl; + hdr->tcp_hdr_words = tcp_hdr(skb)->doff; + hdr->eth_type_mss = htons(MK_ETH_TYPE_MSS(eth_type, + skb_shinfo(skb)->gso_size)); + hdr->len = htonl(skb->len - sizeof(*hdr)); + cpl = (struct cpl_tx_pkt *)hdr; + } else { + /* + * Packets shorter than ETH_HLEN can break the MAC, drop them + * early. Also, we may get oversized packets because some + * parts of the kernel don't handle our unusual hard_header_len + * right, drop those too. + */ + if (unlikely(skb->len < ETH_HLEN || + skb->len > dev->mtu + eth_hdr_len(skb->data))) { + netdev_dbg(dev, "packet size %d hdr %d mtu%d\n", + skb->len, eth_hdr_len(skb->data), dev->mtu); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (skb->ip_summed == CHECKSUM_PARTIAL && + ip_hdr(skb)->protocol == IPPROTO_UDP) { + if (unlikely(skb_checksum_help(skb))) { + netdev_dbg(dev, "unable to do udp checksum\n"); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + } + + /* Hmmm, assuming to catch the gratious arp... and we'll use + * it to flush out stuck espi packets... + */ + if ((unlikely(!adapter->sge->espibug_skb[dev->if_port]))) { + if (skb->protocol == htons(ETH_P_ARP) && + arp_hdr(skb)->ar_op == htons(ARPOP_REQUEST)) { + adapter->sge->espibug_skb[dev->if_port] = skb; + /* We want to re-use this skb later. We + * simply bump the reference count and it + * will not be freed... + */ + skb = skb_get(skb); + } + } + + cpl = __skb_push(skb, sizeof(*cpl)); + cpl->opcode = CPL_TX_PKT; + cpl->ip_csum_dis = 1; /* SW calculates IP csum */ + cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_PARTIAL ? 0 : 1; + /* the length field isn't used so don't bother setting it */ + + st->tx_cso += (skb->ip_summed == CHECKSUM_PARTIAL); + } + cpl->iff = dev->if_port; + + if (skb_vlan_tag_present(skb)) { + cpl->vlan_valid = 1; + cpl->vlan = htons(skb_vlan_tag_get(skb)); + st->vlan_insert++; + } else + cpl->vlan_valid = 0; + +send: + ret = t1_sge_tx(skb, adapter, 0, dev); + + /* If transmit busy, and we reallocated skb's due to headroom limit, + * then silently discard to avoid leak. + */ + if (unlikely(ret != NETDEV_TX_OK && skb != orig_skb)) { + dev_kfree_skb_any(skb); + ret = NETDEV_TX_OK; + } + return ret; +} + +/* + * Callback for the Tx buffer reclaim timer. Runs with softirqs disabled. + */ +static void sge_tx_reclaim_cb(struct timer_list *t) +{ + int i; + struct sge *sge = from_timer(sge, t, tx_reclaim_timer); + + for (i = 0; i < SGE_CMDQ_N; ++i) { + struct cmdQ *q = &sge->cmdQ[i]; + + if (!spin_trylock(&q->lock)) + continue; + + reclaim_completed_tx(sge, q); + if (i == 0 && q->in_use) { /* flush pending credits */ + writel(F_CMDQ0_ENABLE, sge->adapter->regs + A_SG_DOORBELL); + } + spin_unlock(&q->lock); + } + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); +} + +/* + * Propagate changes of the SGE coalescing parameters to the HW. + */ +int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) +{ + sge->fixed_intrtimer = p->rx_coalesce_usecs * + core_ticks_per_usec(sge->adapter); + writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER); + return 0; +} + +/* + * Allocates both RX and TX resources and configures the SGE. However, + * the hardware is not enabled yet. + */ +int t1_sge_configure(struct sge *sge, struct sge_params *p) +{ + if (alloc_rx_resources(sge, p)) + return -ENOMEM; + if (alloc_tx_resources(sge, p)) { + free_rx_resources(sge); + return -ENOMEM; + } + configure_sge(sge, p); + + /* + * Now that we have sized the free lists calculate the payload + * capacity of the large buffers. Other parts of the driver use + * this to set the max offload coalescing size so that RX packets + * do not overflow our large buffers. + */ + p->large_buf_capacity = jumbo_payload_capacity(sge); + return 0; +} + +/* + * Disables the DMA engine. + */ +void t1_sge_stop(struct sge *sge) +{ + int i; + writel(0, sge->adapter->regs + A_SG_CONTROL); + readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + + if (is_T2(sge->adapter)) + del_timer_sync(&sge->espibug_timer); + + del_timer_sync(&sge->tx_reclaim_timer); + if (sge->tx_sched) + tx_sched_stop(sge); + + for (i = 0; i < MAX_NPORTS; i++) + kfree_skb(sge->espibug_skb[i]); +} + +/* + * Enables the DMA engine. + */ +void t1_sge_start(struct sge *sge) +{ + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL); + doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE); + readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); + + if (is_T2(sge->adapter)) + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + +/* + * Callback for the T2 ESPI 'stuck packet feature' workaorund + */ +static void espibug_workaround_t204(struct timer_list *t) +{ + struct sge *sge = from_timer(sge, t, espibug_timer); + struct adapter *adapter = sge->adapter; + unsigned int nports = adapter->params.nports; + u32 seop[MAX_NPORTS]; + + if (adapter->open_device_map & PORT_MASK) { + int i; + + if (t1_espi_get_mon_t204(adapter, &(seop[0]), 0) < 0) + return; + + for (i = 0; i < nports; i++) { + struct sk_buff *skb = sge->espibug_skb[i]; + + if (!netif_running(adapter->port[i].dev) || + netif_queue_stopped(adapter->port[i].dev) || + !seop[i] || ((seop[i] & 0xfff) != 0) || !skb) + continue; + + if (!skb->cb[0]) { + skb_copy_to_linear_data_offset(skb, + sizeof(struct cpl_tx_pkt), + ch_mac_addr, + ETH_ALEN); + skb_copy_to_linear_data_offset(skb, + skb->len - 10, + ch_mac_addr, + ETH_ALEN); + skb->cb[0] = 0xff; + } + + /* bump the reference count to avoid freeing of + * the skb once the DMA has completed. + */ + skb = skb_get(skb); + t1_sge_tx(skb, adapter, 0, adapter->port[i].dev); + } + } + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + +static void espibug_workaround(struct timer_list *t) +{ + struct sge *sge = from_timer(sge, t, espibug_timer); + struct adapter *adapter = sge->adapter; + + if (netif_running(adapter->port[0].dev)) { + struct sk_buff *skb = sge->espibug_skb[0]; + u32 seop = t1_espi_get_mon(adapter, 0x930, 0); + + if ((seop & 0xfff0fff) == 0xfff && skb) { + if (!skb->cb[0]) { + skb_copy_to_linear_data_offset(skb, + sizeof(struct cpl_tx_pkt), + ch_mac_addr, + ETH_ALEN); + skb_copy_to_linear_data_offset(skb, + skb->len - 10, + ch_mac_addr, + ETH_ALEN); + skb->cb[0] = 0xff; + } + + /* bump the reference count to avoid freeing of the + * skb once the DMA has completed. + */ + skb = skb_get(skb); + t1_sge_tx(skb, adapter, 0, adapter->port[0].dev); + } + } + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + +/* + * Creates a t1_sge structure and returns suggested resource parameters. + */ +struct sge *t1_sge_create(struct adapter *adapter, struct sge_params *p) +{ + struct sge *sge = kzalloc(sizeof(*sge), GFP_KERNEL); + int i; + + if (!sge) + return NULL; + + sge->adapter = adapter; + sge->netdev = adapter->port[0].dev; + sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : 2; + sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + for_each_port(adapter, i) { + sge->port_stats[i] = alloc_percpu(struct sge_port_stats); + if (!sge->port_stats[i]) + goto nomem_port; + } + + timer_setup(&sge->tx_reclaim_timer, sge_tx_reclaim_cb, 0); + + if (is_T2(sge->adapter)) { + timer_setup(&sge->espibug_timer, + adapter->params.nports > 1 ? espibug_workaround_t204 : espibug_workaround, + 0); + + if (adapter->params.nports > 1) + tx_sched_init(sge); + + sge->espibug_timeout = 1; + /* for T204, every 10ms */ + if (adapter->params.nports > 1) + sge->espibug_timeout = HZ/100; + } + + + p->cmdQ_size[0] = SGE_CMDQ0_E_N; + p->cmdQ_size[1] = SGE_CMDQ1_E_N; + p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; + p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; + if (sge->tx_sched) { + if (board_info(sge->adapter)->board == CHBT_BOARD_CHT204) + p->rx_coalesce_usecs = 15; + else + p->rx_coalesce_usecs = 50; + } else + p->rx_coalesce_usecs = 50; + + p->coalesce_enable = 0; + p->sample_interval_usecs = 0; + + return sge; +nomem_port: + while (i >= 0) { + free_percpu(sge->port_stats[i]); + --i; + } + kfree(sge); + return NULL; + +} |