summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/chelsio/cxgb3/vsc8211.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb3/vsc8211.c')
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/vsc8211.c416
1 files changed, 416 insertions, 0 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb3/vsc8211.c b/drivers/net/ethernet/chelsio/cxgb3/vsc8211.c
new file mode 100644
index 000000000..8638ad42b
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/cxgb3/vsc8211.c
@@ -0,0 +1,416 @@
+/*
+ * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "common.h"
+
+/* VSC8211 PHY specific registers. */
+enum {
+ VSC8211_SIGDET_CTRL = 19,
+ VSC8211_EXT_CTRL = 23,
+ VSC8211_INTR_ENABLE = 25,
+ VSC8211_INTR_STATUS = 26,
+ VSC8211_LED_CTRL = 27,
+ VSC8211_AUX_CTRL_STAT = 28,
+ VSC8211_EXT_PAGE_AXS = 31,
+};
+
+enum {
+ VSC_INTR_RX_ERR = 1 << 0,
+ VSC_INTR_MS_ERR = 1 << 1, /* master/slave resolution error */
+ VSC_INTR_CABLE = 1 << 2, /* cable impairment */
+ VSC_INTR_FALSE_CARR = 1 << 3, /* false carrier */
+ VSC_INTR_MEDIA_CHG = 1 << 4, /* AMS media change */
+ VSC_INTR_RX_FIFO = 1 << 5, /* Rx FIFO over/underflow */
+ VSC_INTR_TX_FIFO = 1 << 6, /* Tx FIFO over/underflow */
+ VSC_INTR_DESCRAMBL = 1 << 7, /* descrambler lock-lost */
+ VSC_INTR_SYMBOL_ERR = 1 << 8, /* symbol error */
+ VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */
+ VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */
+ VSC_INTR_DPLX_CHG = 1 << 12, /* duplex change */
+ VSC_INTR_LINK_CHG = 1 << 13, /* link change */
+ VSC_INTR_SPD_CHG = 1 << 14, /* speed change */
+ VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */
+};
+
+enum {
+ VSC_CTRL_CLAUSE37_VIEW = 1 << 4, /* Switch to Clause 37 view */
+ VSC_CTRL_MEDIA_MODE_HI = 0xf000 /* High part of media mode select */
+};
+
+#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
+ VSC_INTR_DPLX_CHG | VSC_INTR_SPD_CHG | \
+ VSC_INTR_NEG_DONE)
+#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
+ VSC_INTR_ENABLE)
+
+/* PHY specific auxiliary control & status register fields */
+#define S_ACSR_ACTIPHY_TMR 0
+#define M_ACSR_ACTIPHY_TMR 0x3
+#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)
+
+#define S_ACSR_SPEED 3
+#define M_ACSR_SPEED 0x3
+#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)
+
+#define S_ACSR_DUPLEX 5
+#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)
+
+#define S_ACSR_ACTIPHY 6
+#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)
+
+/*
+ * Reset the PHY. This PHY completes reset immediately so we never wait.
+ */
+static int vsc8211_reset(struct cphy *cphy, int wait)
+{
+ return t3_phy_reset(cphy, MDIO_DEVAD_NONE, 0);
+}
+
+static int vsc8211_intr_enable(struct cphy *cphy)
+{
+ return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE,
+ INTR_MASK);
+}
+
+static int vsc8211_intr_disable(struct cphy *cphy)
+{
+ return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE, 0);
+}
+
+static int vsc8211_intr_clear(struct cphy *cphy)
+{
+ u32 val;
+
+ /* Clear PHY interrupts by reading the register. */
+ return t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &val);
+}
+
+static int vsc8211_autoneg_enable(struct cphy *cphy)
+{
+ return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
+ BMCR_PDOWN | BMCR_ISOLATE,
+ BMCR_ANENABLE | BMCR_ANRESTART);
+}
+
+static int vsc8211_autoneg_restart(struct cphy *cphy)
+{
+ return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
+ BMCR_PDOWN | BMCR_ISOLATE,
+ BMCR_ANRESTART);
+}
+
+static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
+ int *speed, int *duplex, int *fc)
+{
+ unsigned int bmcr, status, lpa, adv;
+ int err, sp = -1, dplx = -1, pause = 0;
+
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
+ if (!err)
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
+ if (err)
+ return err;
+
+ if (link_ok) {
+ /*
+ * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
+ * once more to get the current link state.
+ */
+ if (!(status & BMSR_LSTATUS))
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
+ &status);
+ if (err)
+ return err;
+ *link_ok = (status & BMSR_LSTATUS) != 0;
+ }
+ if (!(bmcr & BMCR_ANENABLE)) {
+ dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+ if (bmcr & BMCR_SPEED1000)
+ sp = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ sp = SPEED_100;
+ else
+ sp = SPEED_10;
+ } else if (status & BMSR_ANEGCOMPLETE) {
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_AUX_CTRL_STAT,
+ &status);
+ if (err)
+ return err;
+
+ dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
+ sp = G_ACSR_SPEED(status);
+ if (sp == 0)
+ sp = SPEED_10;
+ else if (sp == 1)
+ sp = SPEED_100;
+ else
+ sp = SPEED_1000;
+
+ if (fc && dplx == DUPLEX_FULL) {
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA,
+ &lpa);
+ if (!err)
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE,
+ MII_ADVERTISE, &adv);
+ if (err)
+ return err;
+
+ if (lpa & adv & ADVERTISE_PAUSE_CAP)
+ pause = PAUSE_RX | PAUSE_TX;
+ else if ((lpa & ADVERTISE_PAUSE_CAP) &&
+ (lpa & ADVERTISE_PAUSE_ASYM) &&
+ (adv & ADVERTISE_PAUSE_ASYM))
+ pause = PAUSE_TX;
+ else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
+ (adv & ADVERTISE_PAUSE_CAP))
+ pause = PAUSE_RX;
+ }
+ }
+ if (speed)
+ *speed = sp;
+ if (duplex)
+ *duplex = dplx;
+ if (fc)
+ *fc = pause;
+ return 0;
+}
+
+static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
+ int *speed, int *duplex, int *fc)
+{
+ unsigned int bmcr, status, lpa, adv;
+ int err, sp = -1, dplx = -1, pause = 0;
+
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
+ if (!err)
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
+ if (err)
+ return err;
+
+ if (link_ok) {
+ /*
+ * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
+ * once more to get the current link state.
+ */
+ if (!(status & BMSR_LSTATUS))
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
+ &status);
+ if (err)
+ return err;
+ *link_ok = (status & BMSR_LSTATUS) != 0;
+ }
+ if (!(bmcr & BMCR_ANENABLE)) {
+ dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+ if (bmcr & BMCR_SPEED1000)
+ sp = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ sp = SPEED_100;
+ else
+ sp = SPEED_10;
+ } else if (status & BMSR_ANEGCOMPLETE) {
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA, &lpa);
+ if (!err)
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_ADVERTISE,
+ &adv);
+ if (err)
+ return err;
+
+ if (adv & lpa & ADVERTISE_1000XFULL) {
+ dplx = DUPLEX_FULL;
+ sp = SPEED_1000;
+ } else if (adv & lpa & ADVERTISE_1000XHALF) {
+ dplx = DUPLEX_HALF;
+ sp = SPEED_1000;
+ }
+
+ if (fc && dplx == DUPLEX_FULL) {
+ if (lpa & adv & ADVERTISE_1000XPAUSE)
+ pause = PAUSE_RX | PAUSE_TX;
+ else if ((lpa & ADVERTISE_1000XPAUSE) &&
+ (adv & lpa & ADVERTISE_1000XPSE_ASYM))
+ pause = PAUSE_TX;
+ else if ((lpa & ADVERTISE_1000XPSE_ASYM) &&
+ (adv & ADVERTISE_1000XPAUSE))
+ pause = PAUSE_RX;
+ }
+ }
+ if (speed)
+ *speed = sp;
+ if (duplex)
+ *duplex = dplx;
+ if (fc)
+ *fc = pause;
+ return 0;
+}
+
+#ifdef UNUSED
+/*
+ * Enable/disable auto MDI/MDI-X in forced link speed mode.
+ */
+static int vsc8211_set_automdi(struct cphy *phy, int enable)
+{
+ int err;
+
+ err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0x52b5);
+ if (err)
+ return err;
+
+ err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 18, 0x12);
+ if (err)
+ return err;
+
+ err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 17, enable ? 0x2803 : 0x3003);
+ if (err)
+ return err;
+
+ err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 16, 0x87fa);
+ if (err)
+ return err;
+
+ err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+int vsc8211_set_speed_duplex(struct cphy *phy, int speed, int duplex)
+{
+ int err;
+
+ err = t3_set_phy_speed_duplex(phy, speed, duplex);
+ if (!err)
+ err = vsc8211_set_automdi(phy, 1);
+ return err;
+}
+#endif /* UNUSED */
+
+static int vsc8211_power_down(struct cphy *cphy, int enable)
+{
+ return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
+ enable ? BMCR_PDOWN : 0);
+}
+
+static int vsc8211_intr_handler(struct cphy *cphy)
+{
+ unsigned int cause;
+ int err, cphy_cause = 0;
+
+ err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &cause);
+ if (err)
+ return err;
+
+ cause &= INTR_MASK;
+ if (cause & CFG_CHG_INTR_MASK)
+ cphy_cause |= cphy_cause_link_change;
+ if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO))
+ cphy_cause |= cphy_cause_fifo_error;
+ return cphy_cause;
+}
+
+static const struct cphy_ops vsc8211_ops = {
+ .reset = vsc8211_reset,
+ .intr_enable = vsc8211_intr_enable,
+ .intr_disable = vsc8211_intr_disable,
+ .intr_clear = vsc8211_intr_clear,
+ .intr_handler = vsc8211_intr_handler,
+ .autoneg_enable = vsc8211_autoneg_enable,
+ .autoneg_restart = vsc8211_autoneg_restart,
+ .advertise = t3_phy_advertise,
+ .set_speed_duplex = t3_set_phy_speed_duplex,
+ .get_link_status = vsc8211_get_link_status,
+ .power_down = vsc8211_power_down,
+};
+
+static const struct cphy_ops vsc8211_fiber_ops = {
+ .reset = vsc8211_reset,
+ .intr_enable = vsc8211_intr_enable,
+ .intr_disable = vsc8211_intr_disable,
+ .intr_clear = vsc8211_intr_clear,
+ .intr_handler = vsc8211_intr_handler,
+ .autoneg_enable = vsc8211_autoneg_enable,
+ .autoneg_restart = vsc8211_autoneg_restart,
+ .advertise = t3_phy_advertise_fiber,
+ .set_speed_duplex = t3_set_phy_speed_duplex,
+ .get_link_status = vsc8211_get_link_status_fiber,
+ .power_down = vsc8211_power_down,
+};
+
+int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ int err;
+ unsigned int val;
+
+ cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops,
+ SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII |
+ SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
+ msleep(20); /* PHY needs ~10ms to start responding to MDIO */
+
+ err = t3_mdio_read(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL, &val);
+ if (err)
+ return err;
+ if (val & VSC_CTRL_MEDIA_MODE_HI) {
+ /* copper interface, just need to configure the LEDs */
+ return t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_LED_CTRL,
+ 0x100);
+ }
+
+ phy->caps = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
+ SUPPORTED_MII | SUPPORTED_FIBRE | SUPPORTED_IRQ;
+ phy->desc = "1000BASE-X";
+ phy->ops = &vsc8211_fiber_ops;
+
+ err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 1);
+ if (err)
+ return err;
+
+ err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_SIGDET_CTRL, 1);
+ if (err)
+ return err;
+
+ err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
+ if (err)
+ return err;
+
+ err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL,
+ val | VSC_CTRL_CLAUSE37_VIEW);
+ if (err)
+ return err;
+
+ err = vsc8211_reset(phy, 0);
+ if (err)
+ return err;
+
+ udelay(5); /* delay after reset before next SMI */
+ return 0;
+}