diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 2260 |
1 files changed, 2260 insertions, 0 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c new file mode 100644 index 000000000..1c52592d3 --- /dev/null +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -0,0 +1,2260 @@ +/* + * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet + * driver for Linux. + * + * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/ethtool.h> +#include <linux/pci.h> + +#include "t4vf_common.h" +#include "t4vf_defs.h" + +#include "../cxgb4/t4_regs.h" +#include "../cxgb4/t4_values.h" +#include "../cxgb4/t4fw_api.h" + +/* + * Wait for the device to become ready (signified by our "who am I" register + * returning a value other than all 1's). Return an error if it doesn't + * become ready ... + */ +int t4vf_wait_dev_ready(struct adapter *adapter) +{ + const u32 whoami = T4VF_PL_BASE_ADDR + PL_VF_WHOAMI; + const u32 notready1 = 0xffffffff; + const u32 notready2 = 0xeeeeeeee; + u32 val; + + val = t4_read_reg(adapter, whoami); + if (val != notready1 && val != notready2) + return 0; + msleep(500); + val = t4_read_reg(adapter, whoami); + if (val != notready1 && val != notready2) + return 0; + else + return -EIO; +} + +/* + * Get the reply to a mailbox command and store it in @rpl in big-endian order + * (since the firmware data structures are specified in a big-endian layout). + */ +static void get_mbox_rpl(struct adapter *adapter, __be64 *rpl, int size, + u32 mbox_data) +{ + for ( ; size; size -= 8, mbox_data += 8) + *rpl++ = cpu_to_be64(t4_read_reg64(adapter, mbox_data)); +} + +/** + * t4vf_record_mbox - record a Firmware Mailbox Command/Reply in the log + * @adapter: the adapter + * @cmd: the Firmware Mailbox Command or Reply + * @size: command length in bytes + * @access: the time (ms) needed to access the Firmware Mailbox + * @execute: the time (ms) the command spent being executed + */ +static void t4vf_record_mbox(struct adapter *adapter, const __be64 *cmd, + int size, int access, int execute) +{ + struct mbox_cmd_log *log = adapter->mbox_log; + struct mbox_cmd *entry; + int i; + + entry = mbox_cmd_log_entry(log, log->cursor++); + if (log->cursor == log->size) + log->cursor = 0; + + for (i = 0; i < size / 8; i++) + entry->cmd[i] = be64_to_cpu(cmd[i]); + while (i < MBOX_LEN / 8) + entry->cmd[i++] = 0; + entry->timestamp = jiffies; + entry->seqno = log->seqno++; + entry->access = access; + entry->execute = execute; +} + +/** + * t4vf_wr_mbox_core - send a command to FW through the mailbox + * @adapter: the adapter + * @cmd: the command to write + * @size: command length in bytes + * @rpl: where to optionally store the reply + * @sleep_ok: if true we may sleep while awaiting command completion + * + * Sends the given command to FW through the mailbox and waits for the + * FW to execute the command. If @rpl is not %NULL it is used to store + * the FW's reply to the command. The command and its optional reply + * are of the same length. FW can take up to 500 ms to respond. + * @sleep_ok determines whether we may sleep while awaiting the response. + * If sleeping is allowed we use progressive backoff otherwise we spin. + * + * The return value is 0 on success or a negative errno on failure. A + * failure can happen either because we are not able to execute the + * command or FW executes it but signals an error. In the latter case + * the return value is the error code indicated by FW (negated). + */ +int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, + void *rpl, bool sleep_ok) +{ + static const int delay[] = { + 1, 1, 3, 5, 10, 10, 20, 50, 100 + }; + + u16 access = 0, execute = 0; + u32 v, mbox_data; + int i, ms, delay_idx, ret; + const __be64 *p; + u32 mbox_ctl = T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL; + u32 cmd_op = FW_CMD_OP_G(be32_to_cpu(((struct fw_cmd_hdr *)cmd)->hi)); + __be64 cmd_rpl[MBOX_LEN / 8]; + struct mbox_list entry; + + /* In T6, mailbox size is changed to 128 bytes to avoid + * invalidating the entire prefetch buffer. + */ + if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) + mbox_data = T4VF_MBDATA_BASE_ADDR; + else + mbox_data = T6VF_MBDATA_BASE_ADDR; + + /* + * Commands must be multiples of 16 bytes in length and may not be + * larger than the size of the Mailbox Data register array. + */ + if ((size % 16) != 0 || + size > NUM_CIM_VF_MAILBOX_DATA_INSTANCES * 4) + return -EINVAL; + + /* Queue ourselves onto the mailbox access list. When our entry is at + * the front of the list, we have rights to access the mailbox. So we + * wait [for a while] till we're at the front [or bail out with an + * EBUSY] ... + */ + spin_lock(&adapter->mbox_lock); + list_add_tail(&entry.list, &adapter->mlist.list); + spin_unlock(&adapter->mbox_lock); + + delay_idx = 0; + ms = delay[0]; + + for (i = 0; ; i += ms) { + /* If we've waited too long, return a busy indication. This + * really ought to be based on our initial position in the + * mailbox access list but this is a start. We very rearely + * contend on access to the mailbox ... + */ + if (i > FW_CMD_MAX_TIMEOUT) { + spin_lock(&adapter->mbox_lock); + list_del(&entry.list); + spin_unlock(&adapter->mbox_lock); + ret = -EBUSY; + t4vf_record_mbox(adapter, cmd, size, access, ret); + return ret; + } + + /* If we're at the head, break out and start the mailbox + * protocol. + */ + if (list_first_entry(&adapter->mlist.list, struct mbox_list, + list) == &entry) + break; + + /* Delay for a bit before checking again ... */ + if (sleep_ok) { + ms = delay[delay_idx]; /* last element may repeat */ + if (delay_idx < ARRAY_SIZE(delay) - 1) + delay_idx++; + msleep(ms); + } else { + mdelay(ms); + } + } + + /* + * Loop trying to get ownership of the mailbox. Return an error + * if we can't gain ownership. + */ + v = MBOWNER_G(t4_read_reg(adapter, mbox_ctl)); + for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++) + v = MBOWNER_G(t4_read_reg(adapter, mbox_ctl)); + if (v != MBOX_OWNER_DRV) { + spin_lock(&adapter->mbox_lock); + list_del(&entry.list); + spin_unlock(&adapter->mbox_lock); + ret = (v == MBOX_OWNER_FW) ? -EBUSY : -ETIMEDOUT; + t4vf_record_mbox(adapter, cmd, size, access, ret); + return ret; + } + + /* + * Write the command array into the Mailbox Data register array and + * transfer ownership of the mailbox to the firmware. + * + * For the VFs, the Mailbox Data "registers" are actually backed by + * T4's "MA" interface rather than PL Registers (as is the case for + * the PFs). Because these are in different coherency domains, the + * write to the VF's PL-register-backed Mailbox Control can race in + * front of the writes to the MA-backed VF Mailbox Data "registers". + * So we need to do a read-back on at least one byte of the VF Mailbox + * Data registers before doing the write to the VF Mailbox Control + * register. + */ + if (cmd_op != FW_VI_STATS_CMD) + t4vf_record_mbox(adapter, cmd, size, access, 0); + for (i = 0, p = cmd; i < size; i += 8) + t4_write_reg64(adapter, mbox_data + i, be64_to_cpu(*p++)); + t4_read_reg(adapter, mbox_data); /* flush write */ + + t4_write_reg(adapter, mbox_ctl, + MBMSGVALID_F | MBOWNER_V(MBOX_OWNER_FW)); + t4_read_reg(adapter, mbox_ctl); /* flush write */ + + /* + * Spin waiting for firmware to acknowledge processing our command. + */ + delay_idx = 0; + ms = delay[0]; + + for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) { + if (sleep_ok) { + ms = delay[delay_idx]; + if (delay_idx < ARRAY_SIZE(delay) - 1) + delay_idx++; + msleep(ms); + } else + mdelay(ms); + + /* + * If we're the owner, see if this is the reply we wanted. + */ + v = t4_read_reg(adapter, mbox_ctl); + if (MBOWNER_G(v) == MBOX_OWNER_DRV) { + /* + * If the Message Valid bit isn't on, revoke ownership + * of the mailbox and continue waiting for our reply. + */ + if ((v & MBMSGVALID_F) == 0) { + t4_write_reg(adapter, mbox_ctl, + MBOWNER_V(MBOX_OWNER_NONE)); + continue; + } + + /* + * We now have our reply. Extract the command return + * value, copy the reply back to our caller's buffer + * (if specified) and revoke ownership of the mailbox. + * We return the (negated) firmware command return + * code (this depends on FW_SUCCESS == 0). + */ + get_mbox_rpl(adapter, cmd_rpl, size, mbox_data); + + /* return value in low-order little-endian word */ + v = be64_to_cpu(cmd_rpl[0]); + + if (rpl) { + /* request bit in high-order BE word */ + WARN_ON((be32_to_cpu(*(const __be32 *)cmd) + & FW_CMD_REQUEST_F) == 0); + memcpy(rpl, cmd_rpl, size); + WARN_ON((be32_to_cpu(*(__be32 *)rpl) + & FW_CMD_REQUEST_F) != 0); + } + t4_write_reg(adapter, mbox_ctl, + MBOWNER_V(MBOX_OWNER_NONE)); + execute = i + ms; + if (cmd_op != FW_VI_STATS_CMD) + t4vf_record_mbox(adapter, cmd_rpl, size, access, + execute); + spin_lock(&adapter->mbox_lock); + list_del(&entry.list); + spin_unlock(&adapter->mbox_lock); + return -FW_CMD_RETVAL_G(v); + } + } + + /* We timed out. Return the error ... */ + ret = -ETIMEDOUT; + t4vf_record_mbox(adapter, cmd, size, access, ret); + spin_lock(&adapter->mbox_lock); + list_del(&entry.list); + spin_unlock(&adapter->mbox_lock); + return ret; +} + +/* In the Physical Function Driver Common Code, the ADVERT_MASK is used to + * mask out bits in the Advertised Port Capabilities which are managed via + * separate controls, like Pause Frames and Forward Error Correction. In the + * Virtual Function Common Code, since we never perform L1 Configuration on + * the Link, the only things we really need to filter out are things which + * we decode and report separately like Speed. + */ +#define ADVERT_MASK (FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_M) | \ + FW_PORT_CAP32_802_3_PAUSE | \ + FW_PORT_CAP32_802_3_ASM_DIR | \ + FW_PORT_CAP32_FEC_V(FW_PORT_CAP32_FEC_M) | \ + FW_PORT_CAP32_ANEG) + +/** + * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits + * @caps16: a 16-bit Port Capabilities value + * + * Returns the equivalent 32-bit Port Capabilities value. + */ +static fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16) +{ + fw_port_cap32_t caps32 = 0; + + #define CAP16_TO_CAP32(__cap) \ + do { \ + if (caps16 & FW_PORT_CAP_##__cap) \ + caps32 |= FW_PORT_CAP32_##__cap; \ + } while (0) + + CAP16_TO_CAP32(SPEED_100M); + CAP16_TO_CAP32(SPEED_1G); + CAP16_TO_CAP32(SPEED_25G); + CAP16_TO_CAP32(SPEED_10G); + CAP16_TO_CAP32(SPEED_40G); + CAP16_TO_CAP32(SPEED_100G); + CAP16_TO_CAP32(FC_RX); + CAP16_TO_CAP32(FC_TX); + CAP16_TO_CAP32(ANEG); + CAP16_TO_CAP32(MDIAUTO); + CAP16_TO_CAP32(MDISTRAIGHT); + CAP16_TO_CAP32(FEC_RS); + CAP16_TO_CAP32(FEC_BASER_RS); + CAP16_TO_CAP32(802_3_PAUSE); + CAP16_TO_CAP32(802_3_ASM_DIR); + + #undef CAP16_TO_CAP32 + + return caps32; +} + +/* Translate Firmware Pause specification to Common Code */ +static inline enum cc_pause fwcap_to_cc_pause(fw_port_cap32_t fw_pause) +{ + enum cc_pause cc_pause = 0; + + if (fw_pause & FW_PORT_CAP32_FC_RX) + cc_pause |= PAUSE_RX; + if (fw_pause & FW_PORT_CAP32_FC_TX) + cc_pause |= PAUSE_TX; + + return cc_pause; +} + +/* Translate Firmware Forward Error Correction specification to Common Code */ +static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec) +{ + enum cc_fec cc_fec = 0; + + if (fw_fec & FW_PORT_CAP32_FEC_RS) + cc_fec |= FEC_RS; + if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS) + cc_fec |= FEC_BASER_RS; + + return cc_fec; +} + +/* Return the highest speed set in the port capabilities, in Mb/s. */ +static unsigned int fwcap_to_speed(fw_port_cap32_t caps) +{ + #define TEST_SPEED_RETURN(__caps_speed, __speed) \ + do { \ + if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \ + return __speed; \ + } while (0) + + TEST_SPEED_RETURN(400G, 400000); + TEST_SPEED_RETURN(200G, 200000); + TEST_SPEED_RETURN(100G, 100000); + TEST_SPEED_RETURN(50G, 50000); + TEST_SPEED_RETURN(40G, 40000); + TEST_SPEED_RETURN(25G, 25000); + TEST_SPEED_RETURN(10G, 10000); + TEST_SPEED_RETURN(1G, 1000); + TEST_SPEED_RETURN(100M, 100); + + #undef TEST_SPEED_RETURN + + return 0; +} + +/** + * fwcap_to_fwspeed - return highest speed in Port Capabilities + * @acaps: advertised Port Capabilities + * + * Get the highest speed for the port from the advertised Port + * Capabilities. It will be either the highest speed from the list of + * speeds or whatever user has set using ethtool. + */ +static fw_port_cap32_t fwcap_to_fwspeed(fw_port_cap32_t acaps) +{ + #define TEST_SPEED_RETURN(__caps_speed) \ + do { \ + if (acaps & FW_PORT_CAP32_SPEED_##__caps_speed) \ + return FW_PORT_CAP32_SPEED_##__caps_speed; \ + } while (0) + + TEST_SPEED_RETURN(400G); + TEST_SPEED_RETURN(200G); + TEST_SPEED_RETURN(100G); + TEST_SPEED_RETURN(50G); + TEST_SPEED_RETURN(40G); + TEST_SPEED_RETURN(25G); + TEST_SPEED_RETURN(10G); + TEST_SPEED_RETURN(1G); + TEST_SPEED_RETURN(100M); + + #undef TEST_SPEED_RETURN + return 0; +} + +/* + * init_link_config - initialize a link's SW state + * @lc: structure holding the link state + * @pcaps: link Port Capabilities + * @acaps: link current Advertised Port Capabilities + * + * Initializes the SW state maintained for each link, including the link's + * capabilities and default speed/flow-control/autonegotiation settings. + */ +static void init_link_config(struct link_config *lc, + fw_port_cap32_t pcaps, + fw_port_cap32_t acaps) +{ + lc->pcaps = pcaps; + lc->lpacaps = 0; + lc->speed_caps = 0; + lc->speed = 0; + lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; + + /* For Forward Error Control, we default to whatever the Firmware + * tells us the Link is currently advertising. + */ + lc->auto_fec = fwcap_to_cc_fec(acaps); + lc->requested_fec = FEC_AUTO; + lc->fec = lc->auto_fec; + + /* If the Port is capable of Auto-Negtotiation, initialize it as + * "enabled" and copy over all of the Physical Port Capabilities + * to the Advertised Port Capabilities. Otherwise mark it as + * Auto-Negotiate disabled and select the highest supported speed + * for the link. Note parallel structure in t4_link_l1cfg_core() + * and t4_handle_get_port_info(). + */ + if (lc->pcaps & FW_PORT_CAP32_ANEG) { + lc->acaps = acaps & ADVERT_MASK; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->acaps = 0; + lc->autoneg = AUTONEG_DISABLE; + lc->speed_caps = fwcap_to_fwspeed(acaps); + } +} + +/** + * t4vf_port_init - initialize port hardware/software state + * @adapter: the adapter + * @pidx: the adapter port index + */ +int t4vf_port_init(struct adapter *adapter, int pidx) +{ + struct port_info *pi = adap2pinfo(adapter, pidx); + unsigned int fw_caps = adapter->params.fw_caps_support; + struct fw_vi_cmd vi_cmd, vi_rpl; + struct fw_port_cmd port_cmd, port_rpl; + enum fw_port_type port_type; + int mdio_addr; + fw_port_cap32_t pcaps, acaps; + int ret; + + /* If we haven't yet determined whether we're talking to Firmware + * which knows the new 32-bit Port Capabilities, it's time to find + * out now. This will also tell new Firmware to send us Port Status + * Updates using the new 32-bit Port Capabilities version of the + * Port Information message. + */ + if (fw_caps == FW_CAPS_UNKNOWN) { + u32 param, val; + + param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_PORT_CAPS32)); + val = 1; + ret = t4vf_set_params(adapter, 1, ¶m, &val); + fw_caps = (ret == 0 ? FW_CAPS32 : FW_CAPS16); + adapter->params.fw_caps_support = fw_caps; + } + + /* + * Execute a VI Read command to get our Virtual Interface information + * like MAC address, etc. + */ + memset(&vi_cmd, 0, sizeof(vi_cmd)); + vi_cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_READ_F); + vi_cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(vi_cmd)); + vi_cmd.type_viid = cpu_to_be16(FW_VI_CMD_VIID_V(pi->viid)); + ret = t4vf_wr_mbox(adapter, &vi_cmd, sizeof(vi_cmd), &vi_rpl); + if (ret != FW_SUCCESS) + return ret; + + BUG_ON(pi->port_id != FW_VI_CMD_PORTID_G(vi_rpl.portid_pkd)); + pi->rss_size = FW_VI_CMD_RSSSIZE_G(be16_to_cpu(vi_rpl.rsssize_pkd)); + t4_os_set_hw_addr(adapter, pidx, vi_rpl.mac); + + /* + * If we don't have read access to our port information, we're done + * now. Otherwise, execute a PORT Read command to get it ... + */ + if (!(adapter->params.vfres.r_caps & FW_CMD_CAP_PORT)) + return 0; + + memset(&port_cmd, 0, sizeof(port_cmd)); + port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_READ_F | + FW_PORT_CMD_PORTID_V(pi->port_id)); + port_cmd.action_to_len16 = cpu_to_be32( + FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16 + ? FW_PORT_ACTION_GET_PORT_INFO + : FW_PORT_ACTION_GET_PORT_INFO32) | + FW_LEN16(port_cmd)); + ret = t4vf_wr_mbox(adapter, &port_cmd, sizeof(port_cmd), &port_rpl); + if (ret != FW_SUCCESS) + return ret; + + /* Extract the various fields from the Port Information message. */ + if (fw_caps == FW_CAPS16) { + u32 lstatus = be32_to_cpu(port_rpl.u.info.lstatus_to_modtype); + + port_type = FW_PORT_CMD_PTYPE_G(lstatus); + mdio_addr = ((lstatus & FW_PORT_CMD_MDIOCAP_F) + ? FW_PORT_CMD_MDIOADDR_G(lstatus) + : -1); + pcaps = fwcaps16_to_caps32(be16_to_cpu(port_rpl.u.info.pcap)); + acaps = fwcaps16_to_caps32(be16_to_cpu(port_rpl.u.info.acap)); + } else { + u32 lstatus32 = + be32_to_cpu(port_rpl.u.info32.lstatus32_to_cbllen32); + + port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32); + mdio_addr = ((lstatus32 & FW_PORT_CMD_MDIOCAP32_F) + ? FW_PORT_CMD_MDIOADDR32_G(lstatus32) + : -1); + pcaps = be32_to_cpu(port_rpl.u.info32.pcaps32); + acaps = be32_to_cpu(port_rpl.u.info32.acaps32); + } + + pi->port_type = port_type; + pi->mdio_addr = mdio_addr; + pi->mod_type = FW_PORT_MOD_TYPE_NA; + + init_link_config(&pi->link_cfg, pcaps, acaps); + return 0; +} + +/** + * t4vf_fw_reset - issue a reset to FW + * @adapter: the adapter + * + * Issues a reset command to FW. For a Physical Function this would + * result in the Firmware resetting all of its state. For a Virtual + * Function this just resets the state associated with the VF. + */ +int t4vf_fw_reset(struct adapter *adapter) +{ + struct fw_reset_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_RESET_CMD) | + FW_CMD_WRITE_F); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_query_params - query FW or device parameters + * @adapter: the adapter + * @nparams: the number of parameters + * @params: the parameter names + * @vals: the parameter values + * + * Reads the values of firmware or device parameters. Up to 7 parameters + * can be queried at once. + */ +static int t4vf_query_params(struct adapter *adapter, unsigned int nparams, + const u32 *params, u32 *vals) +{ + int i, ret; + struct fw_params_cmd cmd, rpl; + struct fw_params_param *p; + size_t len16; + + if (nparams > 7) + return -EINVAL; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_READ_F); + len16 = DIV_ROUND_UP(offsetof(struct fw_params_cmd, + param[nparams].mnem), 16); + cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(len16)); + for (i = 0, p = &cmd.param[0]; i < nparams; i++, p++) + p->mnem = htonl(*params++); + + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (ret == 0) + for (i = 0, p = &rpl.param[0]; i < nparams; i++, p++) + *vals++ = be32_to_cpu(p->val); + return ret; +} + +/** + * t4vf_set_params - sets FW or device parameters + * @adapter: the adapter + * @nparams: the number of parameters + * @params: the parameter names + * @vals: the parameter values + * + * Sets the values of firmware or device parameters. Up to 7 parameters + * can be specified at once. + */ +int t4vf_set_params(struct adapter *adapter, unsigned int nparams, + const u32 *params, const u32 *vals) +{ + int i; + struct fw_params_cmd cmd; + struct fw_params_param *p; + size_t len16; + + if (nparams > 7) + return -EINVAL; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_WRITE_F); + len16 = DIV_ROUND_UP(offsetof(struct fw_params_cmd, + param[nparams]), 16); + cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(len16)); + for (i = 0, p = &cmd.param[0]; i < nparams; i++, p++) { + p->mnem = cpu_to_be32(*params++); + p->val = cpu_to_be32(*vals++); + } + + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_fl_pkt_align - return the fl packet alignment + * @adapter: the adapter + * + * T4 has a single field to specify the packing and padding boundary. + * T5 onwards has separate fields for this and hence the alignment for + * next packet offset is maximum of these two. And T6 changes the + * Ingress Padding Boundary Shift, so it's all a mess and it's best + * if we put this in low-level Common Code ... + * + */ +int t4vf_fl_pkt_align(struct adapter *adapter) +{ + u32 sge_control, sge_control2; + unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift; + + sge_control = adapter->params.sge.sge_control; + + /* T4 uses a single control field to specify both the PCIe Padding and + * Packing Boundary. T5 introduced the ability to specify these + * separately. The actual Ingress Packet Data alignment boundary + * within Packed Buffer Mode is the maximum of these two + * specifications. (Note that it makes no real practical sense to + * have the Pading Boudary be larger than the Packing Boundary but you + * could set the chip up that way and, in fact, legacy T4 code would + * end doing this because it would initialize the Padding Boundary and + * leave the Packing Boundary initialized to 0 (16 bytes).) + * Padding Boundary values in T6 starts from 8B, + * where as it is 32B for T4 and T5. + */ + if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) + ingpad_shift = INGPADBOUNDARY_SHIFT_X; + else + ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X; + + ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) + ingpad_shift); + + fl_align = ingpadboundary; + if (!is_t4(adapter->params.chip)) { + /* T5 has a different interpretation of one of the PCIe Packing + * Boundary values. + */ + sge_control2 = adapter->params.sge.sge_control2; + ingpackboundary = INGPACKBOUNDARY_G(sge_control2); + if (ingpackboundary == INGPACKBOUNDARY_16B_X) + ingpackboundary = 16; + else + ingpackboundary = 1 << (ingpackboundary + + INGPACKBOUNDARY_SHIFT_X); + + fl_align = max(ingpadboundary, ingpackboundary); + } + return fl_align; +} + +/** + * t4vf_bar2_sge_qregs - return BAR2 SGE Queue register information + * @adapter: the adapter + * @qid: the Queue ID + * @qtype: the Ingress or Egress type for @qid + * @pbar2_qoffset: BAR2 Queue Offset + * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues + * + * Returns the BAR2 SGE Queue Registers information associated with the + * indicated Absolute Queue ID. These are passed back in return value + * pointers. @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue + * and T4_BAR2_QTYPE_INGRESS for Ingress Queues. + * + * This may return an error which indicates that BAR2 SGE Queue + * registers aren't available. If an error is not returned, then the + * following values are returned: + * + * *@pbar2_qoffset: the BAR2 Offset of the @qid Registers + * *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid + * + * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which + * require the "Inferred Queue ID" ability may be used. E.g. the + * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0, + * then these "Inferred Queue ID" register may not be used. + */ +int t4vf_bar2_sge_qregs(struct adapter *adapter, + unsigned int qid, + enum t4_bar2_qtype qtype, + u64 *pbar2_qoffset, + unsigned int *pbar2_qid) +{ + unsigned int page_shift, page_size, qpp_shift, qpp_mask; + u64 bar2_page_offset, bar2_qoffset; + unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred; + + /* T4 doesn't support BAR2 SGE Queue registers. + */ + if (is_t4(adapter->params.chip)) + return -EINVAL; + + /* Get our SGE Page Size parameters. + */ + page_shift = adapter->params.sge.sge_vf_hps + 10; + page_size = 1 << page_shift; + + /* Get the right Queues per Page parameters for our Queue. + */ + qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS + ? adapter->params.sge.sge_vf_eq_qpp + : adapter->params.sge.sge_vf_iq_qpp); + qpp_mask = (1 << qpp_shift) - 1; + + /* Calculate the basics of the BAR2 SGE Queue register area: + * o The BAR2 page the Queue registers will be in. + * o The BAR2 Queue ID. + * o The BAR2 Queue ID Offset into the BAR2 page. + */ + bar2_page_offset = ((u64)(qid >> qpp_shift) << page_shift); + bar2_qid = qid & qpp_mask; + bar2_qid_offset = bar2_qid * SGE_UDB_SIZE; + + /* If the BAR2 Queue ID Offset is less than the Page Size, then the + * hardware will infer the Absolute Queue ID simply from the writes to + * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a + * BAR2 Queue ID of 0 for those writes). Otherwise, we'll simply + * write to the first BAR2 SGE Queue Area within the BAR2 Page with + * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID + * from the BAR2 Page and BAR2 Queue ID. + * + * One important censequence of this is that some BAR2 SGE registers + * have a "Queue ID" field and we can write the BAR2 SGE Queue ID + * there. But other registers synthesize the SGE Queue ID purely + * from the writes to the registers -- the Write Combined Doorbell + * Buffer is a good example. These BAR2 SGE Registers are only + * available for those BAR2 SGE Register areas where the SGE Absolute + * Queue ID can be inferred from simple writes. + */ + bar2_qoffset = bar2_page_offset; + bar2_qinferred = (bar2_qid_offset < page_size); + if (bar2_qinferred) { + bar2_qoffset += bar2_qid_offset; + bar2_qid = 0; + } + + *pbar2_qoffset = bar2_qoffset; + *pbar2_qid = bar2_qid; + return 0; +} + +unsigned int t4vf_get_pf_from_vf(struct adapter *adapter) +{ + u32 whoami; + + whoami = t4_read_reg(adapter, T4VF_PL_BASE_ADDR + PL_VF_WHOAMI_A); + return (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ? + SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami)); +} + +/** + * t4vf_get_sge_params - retrieve adapter Scatter gather Engine parameters + * @adapter: the adapter + * + * Retrieves various core SGE parameters in the form of hardware SGE + * register values. The caller is responsible for decoding these as + * needed. The SGE parameters are stored in @adapter->params.sge. + */ +int t4vf_get_sge_params(struct adapter *adapter) +{ + struct sge_params *sge_params = &adapter->params.sge; + u32 params[7], vals[7]; + int v; + + params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V(SGE_CONTROL_A)); + params[1] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V(SGE_HOST_PAGE_SIZE_A)); + params[2] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V(SGE_FL_BUFFER_SIZE0_A)); + params[3] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V(SGE_FL_BUFFER_SIZE1_A)); + params[4] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V(SGE_TIMER_VALUE_0_AND_1_A)); + params[5] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V(SGE_TIMER_VALUE_2_AND_3_A)); + params[6] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V(SGE_TIMER_VALUE_4_AND_5_A)); + v = t4vf_query_params(adapter, 7, params, vals); + if (v) + return v; + sge_params->sge_control = vals[0]; + sge_params->sge_host_page_size = vals[1]; + sge_params->sge_fl_buffer_size[0] = vals[2]; + sge_params->sge_fl_buffer_size[1] = vals[3]; + sge_params->sge_timer_value_0_and_1 = vals[4]; + sge_params->sge_timer_value_2_and_3 = vals[5]; + sge_params->sge_timer_value_4_and_5 = vals[6]; + + /* T4 uses a single control field to specify both the PCIe Padding and + * Packing Boundary. T5 introduced the ability to specify these + * separately with the Padding Boundary in SGE_CONTROL and Packing + * Boundary in SGE_CONTROL2. So for T5 and later we need to grab + * SGE_CONTROL in order to determine how ingress packet data will be + * laid out in Packed Buffer Mode. Unfortunately, older versions of + * the firmware won't let us retrieve SGE_CONTROL2 so if we get a + * failure grabbing it we throw an error since we can't figure out the + * right value. + */ + if (!is_t4(adapter->params.chip)) { + params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V(SGE_CONTROL2_A)); + v = t4vf_query_params(adapter, 1, params, vals); + if (v != FW_SUCCESS) { + dev_err(adapter->pdev_dev, + "Unable to get SGE Control2; " + "probably old firmware.\n"); + return v; + } + sge_params->sge_control2 = vals[0]; + } + + params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V(SGE_INGRESS_RX_THRESHOLD_A)); + params[1] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V(SGE_CONM_CTRL_A)); + v = t4vf_query_params(adapter, 2, params, vals); + if (v) + return v; + sge_params->sge_ingress_rx_threshold = vals[0]; + sge_params->sge_congestion_control = vals[1]; + + /* For T5 and later we want to use the new BAR2 Doorbells. + * Unfortunately, older firmware didn't allow the this register to be + * read. + */ + if (!is_t4(adapter->params.chip)) { + unsigned int pf, s_hps, s_qpp; + + params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V( + SGE_EGRESS_QUEUES_PER_PAGE_VF_A)); + params[1] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ_V( + SGE_INGRESS_QUEUES_PER_PAGE_VF_A)); + v = t4vf_query_params(adapter, 2, params, vals); + if (v != FW_SUCCESS) { + dev_warn(adapter->pdev_dev, + "Unable to get VF SGE Queues/Page; " + "probably old firmware.\n"); + return v; + } + sge_params->sge_egress_queues_per_page = vals[0]; + sge_params->sge_ingress_queues_per_page = vals[1]; + + /* We need the Queues/Page for our VF. This is based on the + * PF from which we're instantiated and is indexed in the + * register we just read. Do it once here so other code in + * the driver can just use it. + */ + pf = t4vf_get_pf_from_vf(adapter); + s_hps = (HOSTPAGESIZEPF0_S + + (HOSTPAGESIZEPF1_S - HOSTPAGESIZEPF0_S) * pf); + sge_params->sge_vf_hps = + ((sge_params->sge_host_page_size >> s_hps) + & HOSTPAGESIZEPF0_M); + + s_qpp = (QUEUESPERPAGEPF0_S + + (QUEUESPERPAGEPF1_S - QUEUESPERPAGEPF0_S) * pf); + sge_params->sge_vf_eq_qpp = + ((sge_params->sge_egress_queues_per_page >> s_qpp) + & QUEUESPERPAGEPF0_M); + sge_params->sge_vf_iq_qpp = + ((sge_params->sge_ingress_queues_per_page >> s_qpp) + & QUEUESPERPAGEPF0_M); + } + + return 0; +} + +/** + * t4vf_get_vpd_params - retrieve device VPD paremeters + * @adapter: the adapter + * + * Retrives various device Vital Product Data parameters. The parameters + * are stored in @adapter->params.vpd. + */ +int t4vf_get_vpd_params(struct adapter *adapter) +{ + struct vpd_params *vpd_params = &adapter->params.vpd; + u32 params[7], vals[7]; + int v; + + params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CCLK)); + v = t4vf_query_params(adapter, 1, params, vals); + if (v) + return v; + vpd_params->cclk = vals[0]; + + return 0; +} + +/** + * t4vf_get_dev_params - retrieve device paremeters + * @adapter: the adapter + * + * Retrives various device parameters. The parameters are stored in + * @adapter->params.dev. + */ +int t4vf_get_dev_params(struct adapter *adapter) +{ + struct dev_params *dev_params = &adapter->params.dev; + u32 params[7], vals[7]; + int v; + + params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FWREV)); + params[1] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_TPREV)); + v = t4vf_query_params(adapter, 2, params, vals); + if (v) + return v; + dev_params->fwrev = vals[0]; + dev_params->tprev = vals[1]; + + return 0; +} + +/** + * t4vf_get_rss_glb_config - retrieve adapter RSS Global Configuration + * @adapter: the adapter + * + * Retrieves global RSS mode and parameters with which we have to live + * and stores them in the @adapter's RSS parameters. + */ +int t4vf_get_rss_glb_config(struct adapter *adapter) +{ + struct rss_params *rss = &adapter->params.rss; + struct fw_rss_glb_config_cmd cmd, rpl; + int v; + + /* + * Execute an RSS Global Configuration read command to retrieve + * our RSS configuration. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_RSS_GLB_CONFIG_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_READ_F); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (v) + return v; + + /* + * Transate the big-endian RSS Global Configuration into our + * cpu-endian format based on the RSS mode. We also do first level + * filtering at this point to weed out modes which don't support + * VF Drivers ... + */ + rss->mode = FW_RSS_GLB_CONFIG_CMD_MODE_G( + be32_to_cpu(rpl.u.manual.mode_pkd)); + switch (rss->mode) { + case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: { + u32 word = be32_to_cpu( + rpl.u.basicvirtual.synmapen_to_hashtoeplitz); + + rss->u.basicvirtual.synmapen = + ((word & FW_RSS_GLB_CONFIG_CMD_SYNMAPEN_F) != 0); + rss->u.basicvirtual.syn4tupenipv6 = + ((word & FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV6_F) != 0); + rss->u.basicvirtual.syn2tupenipv6 = + ((word & FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV6_F) != 0); + rss->u.basicvirtual.syn4tupenipv4 = + ((word & FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV4_F) != 0); + rss->u.basicvirtual.syn2tupenipv4 = + ((word & FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV4_F) != 0); + + rss->u.basicvirtual.ofdmapen = + ((word & FW_RSS_GLB_CONFIG_CMD_OFDMAPEN_F) != 0); + + rss->u.basicvirtual.tnlmapen = + ((word & FW_RSS_GLB_CONFIG_CMD_TNLMAPEN_F) != 0); + rss->u.basicvirtual.tnlalllookup = + ((word & FW_RSS_GLB_CONFIG_CMD_TNLALLLKP_F) != 0); + + rss->u.basicvirtual.hashtoeplitz = + ((word & FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ_F) != 0); + + /* we need at least Tunnel Map Enable to be set */ + if (!rss->u.basicvirtual.tnlmapen) + return -EINVAL; + break; + } + + default: + /* all unknown/unsupported RSS modes result in an error */ + return -EINVAL; + } + + return 0; +} + +/** + * t4vf_get_vfres - retrieve VF resource limits + * @adapter: the adapter + * + * Retrieves configured resource limits and capabilities for a virtual + * function. The results are stored in @adapter->vfres. + */ +int t4vf_get_vfres(struct adapter *adapter) +{ + struct vf_resources *vfres = &adapter->params.vfres; + struct fw_pfvf_cmd cmd, rpl; + int v; + u32 word; + + /* + * Execute PFVF Read command to get VF resource limits; bail out early + * with error on command failure. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PFVF_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_READ_F); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (v) + return v; + + /* + * Extract VF resource limits and return success. + */ + word = be32_to_cpu(rpl.niqflint_niq); + vfres->niqflint = FW_PFVF_CMD_NIQFLINT_G(word); + vfres->niq = FW_PFVF_CMD_NIQ_G(word); + + word = be32_to_cpu(rpl.type_to_neq); + vfres->neq = FW_PFVF_CMD_NEQ_G(word); + vfres->pmask = FW_PFVF_CMD_PMASK_G(word); + + word = be32_to_cpu(rpl.tc_to_nexactf); + vfres->tc = FW_PFVF_CMD_TC_G(word); + vfres->nvi = FW_PFVF_CMD_NVI_G(word); + vfres->nexactf = FW_PFVF_CMD_NEXACTF_G(word); + + word = be32_to_cpu(rpl.r_caps_to_nethctrl); + vfres->r_caps = FW_PFVF_CMD_R_CAPS_G(word); + vfres->wx_caps = FW_PFVF_CMD_WX_CAPS_G(word); + vfres->nethctrl = FW_PFVF_CMD_NETHCTRL_G(word); + + return 0; +} + +/** + * t4vf_read_rss_vi_config - read a VI's RSS configuration + * @adapter: the adapter + * @viid: Virtual Interface ID + * @config: pointer to host-native VI RSS Configuration buffer + * + * Reads the Virtual Interface's RSS configuration information and + * translates it into CPU-native format. + */ +int t4vf_read_rss_vi_config(struct adapter *adapter, unsigned int viid, + union rss_vi_config *config) +{ + struct fw_rss_vi_config_cmd cmd, rpl; + int v; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_READ_F | + FW_RSS_VI_CONFIG_CMD_VIID(viid)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (v) + return v; + + switch (adapter->params.rss.mode) { + case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: { + u32 word = be32_to_cpu(rpl.u.basicvirtual.defaultq_to_udpen); + + config->basicvirtual.ip6fourtupen = + ((word & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F) != 0); + config->basicvirtual.ip6twotupen = + ((word & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F) != 0); + config->basicvirtual.ip4fourtupen = + ((word & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F) != 0); + config->basicvirtual.ip4twotupen = + ((word & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F) != 0); + config->basicvirtual.udpen = + ((word & FW_RSS_VI_CONFIG_CMD_UDPEN_F) != 0); + config->basicvirtual.defaultq = + FW_RSS_VI_CONFIG_CMD_DEFAULTQ_G(word); + break; + } + + default: + return -EINVAL; + } + + return 0; +} + +/** + * t4vf_write_rss_vi_config - write a VI's RSS configuration + * @adapter: the adapter + * @viid: Virtual Interface ID + * @config: pointer to host-native VI RSS Configuration buffer + * + * Write the Virtual Interface's RSS configuration information + * (translating it into firmware-native format before writing). + */ +int t4vf_write_rss_vi_config(struct adapter *adapter, unsigned int viid, + union rss_vi_config *config) +{ + struct fw_rss_vi_config_cmd cmd, rpl; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | + FW_RSS_VI_CONFIG_CMD_VIID(viid)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + switch (adapter->params.rss.mode) { + case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: { + u32 word = 0; + + if (config->basicvirtual.ip6fourtupen) + word |= FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F; + if (config->basicvirtual.ip6twotupen) + word |= FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F; + if (config->basicvirtual.ip4fourtupen) + word |= FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F; + if (config->basicvirtual.ip4twotupen) + word |= FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F; + if (config->basicvirtual.udpen) + word |= FW_RSS_VI_CONFIG_CMD_UDPEN_F; + word |= FW_RSS_VI_CONFIG_CMD_DEFAULTQ_V( + config->basicvirtual.defaultq); + cmd.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(word); + break; + } + + default: + return -EINVAL; + } + + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); +} + +/** + * t4vf_config_rss_range - configure a portion of the RSS mapping table + * @adapter: the adapter + * @viid: Virtual Interface of RSS Table Slice + * @start: starting entry in the table to write + * @n: how many table entries to write + * @rspq: values for the "Response Queue" (Ingress Queue) lookup table + * @nrspq: number of values in @rspq + * + * Programs the selected part of the VI's RSS mapping table with the + * provided values. If @nrspq < @n the supplied values are used repeatedly + * until the full table range is populated. + * + * The caller must ensure the values in @rspq are in the range 0..1023. + */ +int t4vf_config_rss_range(struct adapter *adapter, unsigned int viid, + int start, int n, const u16 *rspq, int nrspq) +{ + const u16 *rsp = rspq; + const u16 *rsp_end = rspq+nrspq; + struct fw_rss_ind_tbl_cmd cmd; + + /* + * Initialize firmware command template to write the RSS table. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_IND_TBL_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | + FW_RSS_IND_TBL_CMD_VIID_V(viid)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + + /* + * Each firmware RSS command can accommodate up to 32 RSS Ingress + * Queue Identifiers. These Ingress Queue IDs are packed three to + * a 32-bit word as 10-bit values with the upper remaining 2 bits + * reserved. + */ + while (n > 0) { + __be32 *qp = &cmd.iq0_to_iq2; + int nq = min(n, 32); + int ret; + + /* + * Set up the firmware RSS command header to send the next + * "nq" Ingress Queue IDs to the firmware. + */ + cmd.niqid = cpu_to_be16(nq); + cmd.startidx = cpu_to_be16(start); + + /* + * "nq" more done for the start of the next loop. + */ + start += nq; + n -= nq; + + /* + * While there are still Ingress Queue IDs to stuff into the + * current firmware RSS command, retrieve them from the + * Ingress Queue ID array and insert them into the command. + */ + while (nq > 0) { + /* + * Grab up to the next 3 Ingress Queue IDs (wrapping + * around the Ingress Queue ID array if necessary) and + * insert them into the firmware RSS command at the + * current 3-tuple position within the commad. + */ + u16 qbuf[3]; + u16 *qbp = qbuf; + int nqbuf = min(3, nq); + + nq -= nqbuf; + qbuf[0] = qbuf[1] = qbuf[2] = 0; + while (nqbuf) { + nqbuf--; + *qbp++ = *rsp++; + if (rsp >= rsp_end) + rsp = rspq; + } + *qp++ = cpu_to_be32(FW_RSS_IND_TBL_CMD_IQ0_V(qbuf[0]) | + FW_RSS_IND_TBL_CMD_IQ1_V(qbuf[1]) | + FW_RSS_IND_TBL_CMD_IQ2_V(qbuf[2])); + } + + /* + * Send this portion of the RRS table update to the firmware; + * bail out on any errors. + */ + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); + if (ret) + return ret; + } + return 0; +} + +/** + * t4vf_alloc_vi - allocate a virtual interface on a port + * @adapter: the adapter + * @port_id: physical port associated with the VI + * + * Allocate a new Virtual Interface and bind it to the indicated + * physical port. Return the new Virtual Interface Identifier on + * success, or a [negative] error number on failure. + */ +int t4vf_alloc_vi(struct adapter *adapter, int port_id) +{ + struct fw_vi_cmd cmd, rpl; + int v; + + /* + * Execute a VI command to allocate Virtual Interface and return its + * VIID. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | + FW_CMD_EXEC_F); + cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(cmd) | + FW_VI_CMD_ALLOC_F); + cmd.portid_pkd = FW_VI_CMD_PORTID_V(port_id); + v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (v) + return v; + + return FW_VI_CMD_VIID_G(be16_to_cpu(rpl.type_viid)); +} + +/** + * t4vf_free_vi -- free a virtual interface + * @adapter: the adapter + * @viid: the virtual interface identifier + * + * Free a previously allocated Virtual Interface. Return an error on + * failure. + */ +int t4vf_free_vi(struct adapter *adapter, int viid) +{ + struct fw_vi_cmd cmd; + + /* + * Execute a VI command to free the Virtual Interface. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_EXEC_F); + cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(cmd) | + FW_VI_CMD_FREE_F); + cmd.type_viid = cpu_to_be16(FW_VI_CMD_VIID_V(viid)); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_enable_vi - enable/disable a virtual interface + * @adapter: the adapter + * @viid: the Virtual Interface ID + * @rx_en: 1=enable Rx, 0=disable Rx + * @tx_en: 1=enable Tx, 0=disable Tx + * + * Enables/disables a virtual interface. + */ +int t4vf_enable_vi(struct adapter *adapter, unsigned int viid, + bool rx_en, bool tx_en) +{ + struct fw_vi_enable_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | + FW_VI_ENABLE_CMD_VIID_V(viid)); + cmd.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_IEN_V(rx_en) | + FW_VI_ENABLE_CMD_EEN_V(tx_en) | + FW_LEN16(cmd)); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_enable_pi - enable/disable a Port's virtual interface + * @adapter: the adapter + * @pi: the Port Information structure + * @rx_en: 1=enable Rx, 0=disable Rx + * @tx_en: 1=enable Tx, 0=disable Tx + * + * Enables/disables a Port's virtual interface. If the Virtual + * Interface enable/disable operation is successful, we notify the + * OS-specific code of a potential Link Status change via the OS Contract + * API t4vf_os_link_changed(). + */ +int t4vf_enable_pi(struct adapter *adapter, struct port_info *pi, + bool rx_en, bool tx_en) +{ + int ret = t4vf_enable_vi(adapter, pi->viid, rx_en, tx_en); + + if (ret) + return ret; + t4vf_os_link_changed(adapter, pi->pidx, + rx_en && tx_en && pi->link_cfg.link_ok); + return 0; +} + +/** + * t4vf_identify_port - identify a VI's port by blinking its LED + * @adapter: the adapter + * @viid: the Virtual Interface ID + * @nblinks: how many times to blink LED at 2.5 Hz + * + * Identifies a VI's port by blinking its LED. + */ +int t4vf_identify_port(struct adapter *adapter, unsigned int viid, + unsigned int nblinks) +{ + struct fw_vi_enable_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | + FW_VI_ENABLE_CMD_VIID_V(viid)); + cmd.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_LED_F | + FW_LEN16(cmd)); + cmd.blinkdur = cpu_to_be16(nblinks); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_set_rxmode - set Rx properties of a virtual interface + * @adapter: the adapter + * @viid: the VI id + * @mtu: the new MTU or -1 for no change + * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change + * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change + * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change + * @vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it, + * -1 no change + * @sleep_ok: call is allowed to sleep + * + * Sets Rx properties of a virtual interface. + */ +int t4vf_set_rxmode(struct adapter *adapter, unsigned int viid, + int mtu, int promisc, int all_multi, int bcast, int vlanex, + bool sleep_ok) +{ + struct fw_vi_rxmode_cmd cmd; + + /* convert to FW values */ + if (mtu < 0) + mtu = FW_VI_RXMODE_CMD_MTU_M; + if (promisc < 0) + promisc = FW_VI_RXMODE_CMD_PROMISCEN_M; + if (all_multi < 0) + all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_M; + if (bcast < 0) + bcast = FW_VI_RXMODE_CMD_BROADCASTEN_M; + if (vlanex < 0) + vlanex = FW_VI_RXMODE_CMD_VLANEXEN_M; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_RXMODE_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | + FW_VI_RXMODE_CMD_VIID_V(viid)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + cmd.mtu_to_vlanexen = + cpu_to_be32(FW_VI_RXMODE_CMD_MTU_V(mtu) | + FW_VI_RXMODE_CMD_PROMISCEN_V(promisc) | + FW_VI_RXMODE_CMD_ALLMULTIEN_V(all_multi) | + FW_VI_RXMODE_CMD_BROADCASTEN_V(bcast) | + FW_VI_RXMODE_CMD_VLANEXEN_V(vlanex)); + return t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), NULL, sleep_ok); +} + +/** + * t4vf_alloc_mac_filt - allocates exact-match filters for MAC addresses + * @adapter: the adapter + * @viid: the Virtual Interface Identifier + * @free: if true any existing filters for this VI id are first removed + * @naddr: the number of MAC addresses to allocate filters for (up to 7) + * @addr: the MAC address(es) + * @idx: where to store the index of each allocated filter + * @hash: pointer to hash address filter bitmap + * @sleep_ok: call is allowed to sleep + * + * Allocates an exact-match filter for each of the supplied addresses and + * sets it to the corresponding address. If @idx is not %NULL it should + * have at least @naddr entries, each of which will be set to the index of + * the filter allocated for the corresponding MAC address. If a filter + * could not be allocated for an address its index is set to 0xffff. + * If @hash is not %NULL addresses that fail to allocate an exact filter + * are hashed and update the hash filter bitmap pointed at by @hash. + * + * Returns a negative error number or the number of filters allocated. + */ +int t4vf_alloc_mac_filt(struct adapter *adapter, unsigned int viid, bool free, + unsigned int naddr, const u8 **addr, u16 *idx, + u64 *hash, bool sleep_ok) +{ + int offset, ret = 0; + unsigned nfilters = 0; + unsigned int rem = naddr; + struct fw_vi_mac_cmd cmd, rpl; + unsigned int max_naddr = adapter->params.arch.mps_tcam_size; + + if (naddr > max_naddr) + return -EINVAL; + + for (offset = 0; offset < naddr; /**/) { + unsigned int fw_naddr = (rem < ARRAY_SIZE(cmd.u.exact) + ? rem + : ARRAY_SIZE(cmd.u.exact)); + size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, + u.exact[fw_naddr]), 16); + struct fw_vi_mac_exact *p; + int i; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | + (free ? FW_CMD_EXEC_F : 0) | + FW_VI_MAC_CMD_VIID_V(viid)); + cmd.freemacs_to_len16 = + cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(free) | + FW_CMD_LEN16_V(len16)); + + for (i = 0, p = cmd.u.exact; i < fw_naddr; i++, p++) { + p->valid_to_idx = cpu_to_be16( + FW_VI_MAC_CMD_VALID_F | + FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_ADD_MAC)); + memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr)); + } + + + ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl, + sleep_ok); + if (ret && ret != -ENOMEM) + break; + + for (i = 0, p = rpl.u.exact; i < fw_naddr; i++, p++) { + u16 index = FW_VI_MAC_CMD_IDX_G( + be16_to_cpu(p->valid_to_idx)); + + if (idx) + idx[offset+i] = + (index >= max_naddr + ? 0xffff + : index); + if (index < max_naddr) + nfilters++; + else if (hash) + *hash |= (1ULL << hash_mac_addr(addr[offset+i])); + } + + free = false; + offset += fw_naddr; + rem -= fw_naddr; + } + + /* + * If there were no errors or we merely ran out of room in our MAC + * address arena, return the number of filters actually written. + */ + if (ret == 0 || ret == -ENOMEM) + ret = nfilters; + return ret; +} + +/** + * t4vf_free_mac_filt - frees exact-match filters of given MAC addresses + * @adapter: the adapter + * @viid: the VI id + * @naddr: the number of MAC addresses to allocate filters for (up to 7) + * @addr: the MAC address(es) + * @sleep_ok: call is allowed to sleep + * + * Frees the exact-match filter for each of the supplied addresses + * + * Returns a negative error number or the number of filters freed. + */ +int t4vf_free_mac_filt(struct adapter *adapter, unsigned int viid, + unsigned int naddr, const u8 **addr, bool sleep_ok) +{ + int offset, ret = 0; + struct fw_vi_mac_cmd cmd; + unsigned int nfilters = 0; + unsigned int max_naddr = adapter->params.arch.mps_tcam_size; + unsigned int rem = naddr; + + if (naddr > max_naddr) + return -EINVAL; + + for (offset = 0; offset < (int)naddr ; /**/) { + unsigned int fw_naddr = (rem < ARRAY_SIZE(cmd.u.exact) ? + rem : ARRAY_SIZE(cmd.u.exact)); + size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, + u.exact[fw_naddr]), 16); + struct fw_vi_mac_exact *p; + int i; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | + FW_CMD_EXEC_V(0) | + FW_VI_MAC_CMD_VIID_V(viid)); + cmd.freemacs_to_len16 = + cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) | + FW_CMD_LEN16_V(len16)); + + for (i = 0, p = cmd.u.exact; i < (int)fw_naddr; i++, p++) { + p->valid_to_idx = cpu_to_be16( + FW_VI_MAC_CMD_VALID_F | + FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_MAC_BASED_FREE)); + memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr)); + } + + ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &cmd, + sleep_ok); + if (ret) + break; + + for (i = 0, p = cmd.u.exact; i < fw_naddr; i++, p++) { + u16 index = FW_VI_MAC_CMD_IDX_G( + be16_to_cpu(p->valid_to_idx)); + + if (index < max_naddr) + nfilters++; + } + + offset += fw_naddr; + rem -= fw_naddr; + } + + if (ret == 0) + ret = nfilters; + return ret; +} + +/** + * t4vf_change_mac - modifies the exact-match filter for a MAC address + * @adapter: the adapter + * @viid: the Virtual Interface ID + * @idx: index of existing filter for old value of MAC address, or -1 + * @addr: the new MAC address value + * @persist: if idx < 0, the new MAC allocation should be persistent + * + * Modifies an exact-match filter and sets it to the new MAC address. + * Note that in general it is not possible to modify the value of a given + * filter so the generic way to modify an address filter is to free the + * one being used by the old address value and allocate a new filter for + * the new address value. @idx can be -1 if the address is a new + * addition. + * + * Returns a negative error number or the index of the filter with the new + * MAC value. + */ +int t4vf_change_mac(struct adapter *adapter, unsigned int viid, + int idx, const u8 *addr, bool persist) +{ + int ret; + struct fw_vi_mac_cmd cmd, rpl; + struct fw_vi_mac_exact *p = &cmd.u.exact[0]; + size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, + u.exact[1]), 16); + unsigned int max_mac_addr = adapter->params.arch.mps_tcam_size; + + /* + * If this is a new allocation, determine whether it should be + * persistent (across a "freemacs" operation) or not. + */ + if (idx < 0) + idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | + FW_VI_MAC_CMD_VIID_V(viid)); + cmd.freemacs_to_len16 = cpu_to_be32(FW_CMD_LEN16_V(len16)); + p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F | + FW_VI_MAC_CMD_IDX_V(idx)); + memcpy(p->macaddr, addr, sizeof(p->macaddr)); + + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (ret == 0) { + p = &rpl.u.exact[0]; + ret = FW_VI_MAC_CMD_IDX_G(be16_to_cpu(p->valid_to_idx)); + if (ret >= max_mac_addr) + ret = -ENOMEM; + } + return ret; +} + +/** + * t4vf_set_addr_hash - program the MAC inexact-match hash filter + * @adapter: the adapter + * @viid: the Virtual Interface Identifier + * @ucast: whether the hash filter should also match unicast addresses + * @vec: the value to be written to the hash filter + * @sleep_ok: call is allowed to sleep + * + * Sets the 64-bit inexact-match hash filter for a virtual interface. + */ +int t4vf_set_addr_hash(struct adapter *adapter, unsigned int viid, + bool ucast, u64 vec, bool sleep_ok) +{ + struct fw_vi_mac_cmd cmd; + size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, + u.exact[0]), 16); + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_WRITE_F | + FW_VI_ENABLE_CMD_VIID_V(viid)); + cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_HASHVECEN_F | + FW_VI_MAC_CMD_HASHUNIEN_V(ucast) | + FW_CMD_LEN16_V(len16)); + cmd.u.hash.hashvec = cpu_to_be64(vec); + return t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), NULL, sleep_ok); +} + +/** + * t4vf_get_port_stats - collect "port" statistics + * @adapter: the adapter + * @pidx: the port index + * @s: the stats structure to fill + * + * Collect statistics for the "port"'s Virtual Interface. + */ +int t4vf_get_port_stats(struct adapter *adapter, int pidx, + struct t4vf_port_stats *s) +{ + struct port_info *pi = adap2pinfo(adapter, pidx); + struct fw_vi_stats_vf fwstats; + unsigned int rem = VI_VF_NUM_STATS; + __be64 *fwsp = (__be64 *)&fwstats; + + /* + * Grab the Virtual Interface statistics a chunk at a time via mailbox + * commands. We could use a Work Request and get all of them at once + * but that's an asynchronous interface which is awkward to use. + */ + while (rem) { + unsigned int ix = VI_VF_NUM_STATS - rem; + unsigned int nstats = min(6U, rem); + struct fw_vi_stats_cmd cmd, rpl; + size_t len = (offsetof(struct fw_vi_stats_cmd, u) + + sizeof(struct fw_vi_stats_ctl)); + size_t len16 = DIV_ROUND_UP(len, 16); + int ret; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_STATS_CMD) | + FW_VI_STATS_CMD_VIID_V(pi->viid) | + FW_CMD_REQUEST_F | + FW_CMD_READ_F); + cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(len16)); + cmd.u.ctl.nstats_ix = + cpu_to_be16(FW_VI_STATS_CMD_IX_V(ix) | + FW_VI_STATS_CMD_NSTATS_V(nstats)); + ret = t4vf_wr_mbox_ns(adapter, &cmd, len, &rpl); + if (ret) + return ret; + + memcpy(fwsp, &rpl.u.ctl.stat0, sizeof(__be64) * nstats); + + rem -= nstats; + fwsp += nstats; + } + + /* + * Translate firmware statistics into host native statistics. + */ + s->tx_bcast_bytes = be64_to_cpu(fwstats.tx_bcast_bytes); + s->tx_bcast_frames = be64_to_cpu(fwstats.tx_bcast_frames); + s->tx_mcast_bytes = be64_to_cpu(fwstats.tx_mcast_bytes); + s->tx_mcast_frames = be64_to_cpu(fwstats.tx_mcast_frames); + s->tx_ucast_bytes = be64_to_cpu(fwstats.tx_ucast_bytes); + s->tx_ucast_frames = be64_to_cpu(fwstats.tx_ucast_frames); + s->tx_drop_frames = be64_to_cpu(fwstats.tx_drop_frames); + s->tx_offload_bytes = be64_to_cpu(fwstats.tx_offload_bytes); + s->tx_offload_frames = be64_to_cpu(fwstats.tx_offload_frames); + + s->rx_bcast_bytes = be64_to_cpu(fwstats.rx_bcast_bytes); + s->rx_bcast_frames = be64_to_cpu(fwstats.rx_bcast_frames); + s->rx_mcast_bytes = be64_to_cpu(fwstats.rx_mcast_bytes); + s->rx_mcast_frames = be64_to_cpu(fwstats.rx_mcast_frames); + s->rx_ucast_bytes = be64_to_cpu(fwstats.rx_ucast_bytes); + s->rx_ucast_frames = be64_to_cpu(fwstats.rx_ucast_frames); + + s->rx_err_frames = be64_to_cpu(fwstats.rx_err_frames); + + return 0; +} + +/** + * t4vf_iq_free - free an ingress queue and its free lists + * @adapter: the adapter + * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.) + * @iqid: ingress queue ID + * @fl0id: FL0 queue ID or 0xffff if no attached FL0 + * @fl1id: FL1 queue ID or 0xffff if no attached FL1 + * + * Frees an ingress queue and its associated free lists, if any. + */ +int t4vf_iq_free(struct adapter *adapter, unsigned int iqtype, + unsigned int iqid, unsigned int fl0id, unsigned int fl1id) +{ + struct fw_iq_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_EXEC_F); + cmd.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_FREE_F | + FW_LEN16(cmd)); + cmd.type_to_iqandstindex = + cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype)); + + cmd.iqid = cpu_to_be16(iqid); + cmd.fl0id = cpu_to_be16(fl0id); + cmd.fl1id = cpu_to_be16(fl1id); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_eth_eq_free - free an Ethernet egress queue + * @adapter: the adapter + * @eqid: egress queue ID + * + * Frees an Ethernet egress queue. + */ +int t4vf_eth_eq_free(struct adapter *adapter, unsigned int eqid) +{ + struct fw_eq_eth_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_ETH_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_EXEC_F); + cmd.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_FREE_F | + FW_LEN16(cmd)); + cmd.eqid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_EQID_V(eqid)); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_link_down_rc_str - return a string for a Link Down Reason Code + * @link_down_rc: Link Down Reason Code + * + * Returns a string representation of the Link Down Reason Code. + */ +static const char *t4vf_link_down_rc_str(unsigned char link_down_rc) +{ + static const char * const reason[] = { + "Link Down", + "Remote Fault", + "Auto-negotiation Failure", + "Reserved", + "Insufficient Airflow", + "Unable To Determine Reason", + "No RX Signal Detected", + "Reserved", + }; + + if (link_down_rc >= ARRAY_SIZE(reason)) + return "Bad Reason Code"; + + return reason[link_down_rc]; +} + +/** + * t4vf_handle_get_port_info - process a FW reply message + * @pi: the port info + * @cmd: start of the FW message + * + * Processes a GET_PORT_INFO FW reply message. + */ +static void t4vf_handle_get_port_info(struct port_info *pi, + const struct fw_port_cmd *cmd) +{ + fw_port_cap32_t pcaps, acaps, lpacaps, linkattr; + struct link_config *lc = &pi->link_cfg; + struct adapter *adapter = pi->adapter; + unsigned int speed, fc, fec, adv_fc; + enum fw_port_module_type mod_type; + int action, link_ok, linkdnrc; + enum fw_port_type port_type; + + /* Extract the various fields from the Port Information message. */ + action = FW_PORT_CMD_ACTION_G(be32_to_cpu(cmd->action_to_len16)); + switch (action) { + case FW_PORT_ACTION_GET_PORT_INFO: { + u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype); + + link_ok = (lstatus & FW_PORT_CMD_LSTATUS_F) != 0; + linkdnrc = FW_PORT_CMD_LINKDNRC_G(lstatus); + port_type = FW_PORT_CMD_PTYPE_G(lstatus); + mod_type = FW_PORT_CMD_MODTYPE_G(lstatus); + pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap)); + acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap)); + lpacaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.lpacap)); + + /* Unfortunately the format of the Link Status in the old + * 16-bit Port Information message isn't the same as the + * 16-bit Port Capabilities bitfield used everywhere else ... + */ + linkattr = 0; + if (lstatus & FW_PORT_CMD_RXPAUSE_F) + linkattr |= FW_PORT_CAP32_FC_RX; + if (lstatus & FW_PORT_CMD_TXPAUSE_F) + linkattr |= FW_PORT_CAP32_FC_TX; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) + linkattr |= FW_PORT_CAP32_SPEED_100M; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) + linkattr |= FW_PORT_CAP32_SPEED_1G; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) + linkattr |= FW_PORT_CAP32_SPEED_10G; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G)) + linkattr |= FW_PORT_CAP32_SPEED_25G; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) + linkattr |= FW_PORT_CAP32_SPEED_40G; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G)) + linkattr |= FW_PORT_CAP32_SPEED_100G; + + break; + } + + case FW_PORT_ACTION_GET_PORT_INFO32: { + u32 lstatus32; + + lstatus32 = be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32); + link_ok = (lstatus32 & FW_PORT_CMD_LSTATUS32_F) != 0; + linkdnrc = FW_PORT_CMD_LINKDNRC32_G(lstatus32); + port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32); + mod_type = FW_PORT_CMD_MODTYPE32_G(lstatus32); + pcaps = be32_to_cpu(cmd->u.info32.pcaps32); + acaps = be32_to_cpu(cmd->u.info32.acaps32); + lpacaps = be32_to_cpu(cmd->u.info32.lpacaps32); + linkattr = be32_to_cpu(cmd->u.info32.linkattr32); + break; + } + + default: + dev_err(adapter->pdev_dev, "Handle Port Information: Bad Command/Action %#x\n", + be32_to_cpu(cmd->action_to_len16)); + return; + } + + fec = fwcap_to_cc_fec(acaps); + adv_fc = fwcap_to_cc_pause(acaps); + fc = fwcap_to_cc_pause(linkattr); + speed = fwcap_to_speed(linkattr); + + if (mod_type != pi->mod_type) { + /* When a new Transceiver Module is inserted, the Firmware + * will examine any Forward Error Correction parameters + * present in the Transceiver Module i2c EPROM and determine + * the supported and recommended FEC settings from those + * based on IEEE 802.3 standards. We always record the + * IEEE 802.3 recommended "automatic" settings. + */ + lc->auto_fec = fec; + + /* Some versions of the early T6 Firmware "cheated" when + * handling different Transceiver Modules by changing the + * underlaying Port Type reported to the Host Drivers. As + * such we need to capture whatever Port Type the Firmware + * sends us and record it in case it's different from what we + * were told earlier. Unfortunately, since Firmware is + * forever, we'll need to keep this code here forever, but in + * later T6 Firmware it should just be an assignment of the + * same value already recorded. + */ + pi->port_type = port_type; + + pi->mod_type = mod_type; + t4vf_os_portmod_changed(adapter, pi->pidx); + } + + if (link_ok != lc->link_ok || speed != lc->speed || + fc != lc->fc || adv_fc != lc->advertised_fc || + fec != lc->fec) { + /* something changed */ + if (!link_ok && lc->link_ok) { + lc->link_down_rc = linkdnrc; + dev_warn_ratelimited(adapter->pdev_dev, + "Port %d link down, reason: %s\n", + pi->port_id, + t4vf_link_down_rc_str(linkdnrc)); + } + lc->link_ok = link_ok; + lc->speed = speed; + lc->advertised_fc = adv_fc; + lc->fc = fc; + lc->fec = fec; + + lc->pcaps = pcaps; + lc->lpacaps = lpacaps; + lc->acaps = acaps & ADVERT_MASK; + + /* If we're not physically capable of Auto-Negotiation, note + * this as Auto-Negotiation disabled. Otherwise, we track + * what Auto-Negotiation settings we have. Note parallel + * structure in init_link_config(). + */ + if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) { + lc->autoneg = AUTONEG_DISABLE; + } else if (lc->acaps & FW_PORT_CAP32_ANEG) { + lc->autoneg = AUTONEG_ENABLE; + } else { + /* When Autoneg is disabled, user needs to set + * single speed. + * Similar to cxgb4_ethtool.c: set_link_ksettings + */ + lc->acaps = 0; + lc->speed_caps = fwcap_to_speed(acaps); + lc->autoneg = AUTONEG_DISABLE; + } + + t4vf_os_link_changed(adapter, pi->pidx, link_ok); + } +} + +/** + * t4vf_update_port_info - retrieve and update port information if changed + * @pi: the port_info + * + * We issue a Get Port Information Command to the Firmware and, if + * successful, we check to see if anything is different from what we + * last recorded and update things accordingly. + */ +int t4vf_update_port_info(struct port_info *pi) +{ + unsigned int fw_caps = pi->adapter->params.fw_caps_support; + struct fw_port_cmd port_cmd; + int ret; + + memset(&port_cmd, 0, sizeof(port_cmd)); + port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) | + FW_CMD_REQUEST_F | FW_CMD_READ_F | + FW_PORT_CMD_PORTID_V(pi->port_id)); + port_cmd.action_to_len16 = cpu_to_be32( + FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16 + ? FW_PORT_ACTION_GET_PORT_INFO + : FW_PORT_ACTION_GET_PORT_INFO32) | + FW_LEN16(port_cmd)); + ret = t4vf_wr_mbox(pi->adapter, &port_cmd, sizeof(port_cmd), + &port_cmd); + if (ret) + return ret; + t4vf_handle_get_port_info(pi, &port_cmd); + return 0; +} + +/** + * t4vf_handle_fw_rpl - process a firmware reply message + * @adapter: the adapter + * @rpl: start of the firmware message + * + * Processes a firmware message, such as link state change messages. + */ +int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) +{ + const struct fw_cmd_hdr *cmd_hdr = (const struct fw_cmd_hdr *)rpl; + u8 opcode = FW_CMD_OP_G(be32_to_cpu(cmd_hdr->hi)); + + switch (opcode) { + case FW_PORT_CMD: { + /* + * Link/module state change message. + */ + const struct fw_port_cmd *port_cmd = + (const struct fw_port_cmd *)rpl; + int action = FW_PORT_CMD_ACTION_G( + be32_to_cpu(port_cmd->action_to_len16)); + int port_id, pidx; + + if (action != FW_PORT_ACTION_GET_PORT_INFO && + action != FW_PORT_ACTION_GET_PORT_INFO32) { + dev_err(adapter->pdev_dev, + "Unknown firmware PORT reply action %x\n", + action); + break; + } + + port_id = FW_PORT_CMD_PORTID_G( + be32_to_cpu(port_cmd->op_to_portid)); + for_each_port(adapter, pidx) { + struct port_info *pi = adap2pinfo(adapter, pidx); + + if (pi->port_id != port_id) + continue; + t4vf_handle_get_port_info(pi, port_cmd); + } + break; + } + + default: + dev_err(adapter->pdev_dev, "Unknown firmware reply %X\n", + opcode); + } + return 0; +} + +int t4vf_prep_adapter(struct adapter *adapter) +{ + int err; + unsigned int chipid; + + /* Wait for the device to become ready before proceeding ... + */ + err = t4vf_wait_dev_ready(adapter); + if (err) + return err; + + /* Default port and clock for debugging in case we can't reach + * firmware. + */ + adapter->params.nports = 1; + adapter->params.vfres.pmask = 1; + adapter->params.vpd.cclk = 50000; + + adapter->params.chip = 0; + switch (CHELSIO_PCI_ID_VER(adapter->pdev->device)) { + case CHELSIO_T4: + adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T4, 0); + adapter->params.arch.sge_fl_db = DBPRIO_F; + adapter->params.arch.mps_tcam_size = + NUM_MPS_CLS_SRAM_L_INSTANCES; + break; + + case CHELSIO_T5: + chipid = REV_G(t4_read_reg(adapter, PL_VF_REV_A)); + adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, chipid); + adapter->params.arch.sge_fl_db = DBPRIO_F | DBTYPE_F; + adapter->params.arch.mps_tcam_size = + NUM_MPS_T5_CLS_SRAM_L_INSTANCES; + break; + + case CHELSIO_T6: + chipid = REV_G(t4_read_reg(adapter, PL_VF_REV_A)); + adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, chipid); + adapter->params.arch.sge_fl_db = 0; + adapter->params.arch.mps_tcam_size = + NUM_MPS_T5_CLS_SRAM_L_INSTANCES; + break; + } + + return 0; +} + +/** + * t4vf_get_vf_mac_acl - Get the MAC address to be set to + * the VI of this VF. + * @adapter: The adapter + * @port: The port associated with vf + * @naddr: the number of ACL MAC addresses returned in addr + * @addr: Placeholder for MAC addresses + * + * Find the MAC address to be set to the VF's VI. The requested MAC address + * is from the host OS via callback in the PF driver. + */ +int t4vf_get_vf_mac_acl(struct adapter *adapter, unsigned int port, + unsigned int *naddr, u8 *addr) +{ + struct fw_acl_mac_cmd cmd; + int ret; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_MAC_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_READ_F); + cmd.en_to_len16 = cpu_to_be32((unsigned int)FW_LEN16(cmd)); + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &cmd); + if (ret) + return ret; + + if (cmd.nmac < *naddr) + *naddr = cmd.nmac; + + switch (port) { + case 3: + memcpy(addr, cmd.macaddr3, sizeof(cmd.macaddr3)); + break; + case 2: + memcpy(addr, cmd.macaddr2, sizeof(cmd.macaddr2)); + break; + case 1: + memcpy(addr, cmd.macaddr1, sizeof(cmd.macaddr1)); + break; + case 0: + memcpy(addr, cmd.macaddr0, sizeof(cmd.macaddr0)); + break; + } + + return ret; +} + +/** + * t4vf_get_vf_vlan_acl - Get the VLAN ID to be set to + * the VI of this VF. + * @adapter: The adapter + * + * Find the VLAN ID to be set to the VF's VI. The requested VLAN ID + * is from the host OS via callback in the PF driver. + */ +int t4vf_get_vf_vlan_acl(struct adapter *adapter) +{ + struct fw_acl_vlan_cmd cmd; + int vlan = 0; + int ret = 0; + + cmd.op_to_vfn = htonl(FW_CMD_OP_V(FW_ACL_VLAN_CMD) | + FW_CMD_REQUEST_F | FW_CMD_READ_F); + + /* Note: Do not enable the ACL */ + cmd.en_to_len16 = cpu_to_be32((unsigned int)FW_LEN16(cmd)); + + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &cmd); + + if (!ret) + vlan = be16_to_cpu(cmd.vlanid[0]); + + return vlan; +} |