diff options
Diffstat (limited to 'drivers/net/ethernet/cisco/enic/vnic_devcmd.h')
| -rw-r--r-- | drivers/net/ethernet/cisco/enic/vnic_devcmd.h | 721 |
1 files changed, 721 insertions, 0 deletions
diff --git a/drivers/net/ethernet/cisco/enic/vnic_devcmd.h b/drivers/net/ethernet/cisco/enic/vnic_devcmd.h new file mode 100644 index 000000000..db56d7788 --- /dev/null +++ b/drivers/net/ethernet/cisco/enic/vnic_devcmd.h @@ -0,0 +1,721 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2008-2010 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + */ + +#ifndef _VNIC_DEVCMD_H_ +#define _VNIC_DEVCMD_H_ + +#define _CMD_NBITS 14 +#define _CMD_VTYPEBITS 10 +#define _CMD_FLAGSBITS 6 +#define _CMD_DIRBITS 2 + +#define _CMD_NMASK ((1 << _CMD_NBITS)-1) +#define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1) +#define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1) +#define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1) + +#define _CMD_NSHIFT 0 +#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS) +#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS) +#define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS) + +/* + * Direction bits (from host perspective). + */ +#define _CMD_DIR_NONE 0U +#define _CMD_DIR_WRITE 1U +#define _CMD_DIR_READ 2U +#define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ) + +/* + * Flag bits. + */ +#define _CMD_FLAGS_NONE 0U +#define _CMD_FLAGS_NOWAIT 1U + +/* + * vNIC type bits. + */ +#define _CMD_VTYPE_NONE 0U +#define _CMD_VTYPE_ENET 1U +#define _CMD_VTYPE_FC 2U +#define _CMD_VTYPE_SCSI 4U +#define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI) + +/* + * Used to create cmds.. +*/ +#define _CMDCF(dir, flags, vtype, nr) \ + (((dir) << _CMD_DIRSHIFT) | \ + ((flags) << _CMD_FLAGSSHIFT) | \ + ((vtype) << _CMD_VTYPESHIFT) | \ + ((nr) << _CMD_NSHIFT)) +#define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr) +#define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr) + +/* + * Used to decode cmds.. +*/ +#define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK) +#define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK) +#define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK) +#define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK) + +enum vnic_devcmd_cmd { + CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0), + + /* + * mcpu fw info in mem: + * in: + * (u64)a0=paddr to struct vnic_devcmd_fw_info + * action: + * Fills in struct vnic_devcmd_fw_info (128 bytes) + * note: + * An old definition of CMD_MCPU_FW_INFO + */ + CMD_MCPU_FW_INFO_OLD = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1), + + /* + * mcpu fw info in mem: + * in: + * (u64)a0=paddr to struct vnic_devcmd_fw_info + * (u16)a1=size of the structure + * out: + * (u16)a1=0 for in:a1 = 0, + * data size actually written for other values. + * action: + * Fills in first 128 bytes of vnic_devcmd_fw_info for in:a1 = 0, + * first in:a1 bytes for 0 < in:a1 <= 132, + * 132 bytes for other values of in:a1. + * note: + * CMD_MCPU_FW_INFO and CMD_MCPU_FW_INFO_OLD have the same enum 1 + * for source compatibility. + */ + CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 1), + + /* dev-specific block member: + * in: (u16)a0=offset,(u8)a1=size + * out: a0=value */ + CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2), + + /* stats clear */ + CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3), + + /* stats dump in mem: (u64)a0=paddr to stats area, + * (u16)a1=sizeof stats area */ + CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4), + + /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */ + CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7), + + /* set Rx packet filter for all: (u32)a0=filters (see CMD_PFILTER_*) */ + CMD_PACKET_FILTER_ALL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7), + + /* hang detection notification */ + CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8), + + /* MAC address in (u48)a0 */ + CMD_GET_MAC_ADDR = _CMDC(_CMD_DIR_READ, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9), + + /* add addr from (u48)a0 */ + CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12), + + /* del addr from (u48)a0 */ + CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13), + + /* add VLAN id in (u16)a0 */ + CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14), + + /* del VLAN id in (u16)a0 */ + CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15), + + /* nic_cfg (no wait, always succeeds) + * in: (u32)a0 + * + * Capability query: + * out: (u64) a0 = 1 if a1 is valid + * (u64) a1 = (NIC_CFG bits supported) | (flags << 32) + * + * flags are CMD_NIC_CFG_CAPF_xxx + */ + CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16), + /* nic_cfg_chk (will return error if flags are invalid) + * in: (u32)a0 + * + * Capability query: + * out: (u64) a0 = 1 if a1 is valid + * (u64) a1 = (NIC_CFG bits supported) | (flags << 32) + * + * flags are CMD_NIC_CFG_CAPF_xxx + */ + CMD_NIC_CFG_CHK = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16), + + /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */ + CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17), + + /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */ + CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18), + + /* initiate softreset */ + CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19), + + /* softreset status: + * out: a0=0 reset complete, a0=1 reset in progress */ + CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20), + + /* set struct vnic_devcmd_notify buffer in mem: + * in: + * (u64)a0=paddr to notify (set paddr=0 to unset) + * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify) + * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr) + * out: + * (u32)a1 = effective size + */ + CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21), + + /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct, + * (u8)a1=PXENV_UNDI_xxx */ + CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22), + + /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */ + CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23), + + /* open status: + * out: a0=0 open complete, a0=1 open in progress */ + CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24), + + /* close vnic */ + CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25), + + /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ +/***** Replaced by CMD_INIT *****/ + CMD_INIT_v1 = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26), + + /* variant of CMD_INIT, with provisioning info + * (u64)a0=paddr of vnic_devcmd_provinfo + * (u32)a1=sizeof provision info */ + CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27), + + /* enable virtual link */ + CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), + + /* enable virtual link, waiting variant. */ + CMD_ENABLE_WAIT = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), + + /* disable virtual link */ + CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29), + + /* stats dump sum of all vnic stats on same uplink in mem: + * (u64)a0=paddr + * (u16)a1=sizeof stats area */ + CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30), + + /* init status: + * out: a0=0 init complete, a0=1 init in progress + * if a0=0, a1=errno */ + CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31), + + /* INT13 API: (u64)a0=paddr to vnic_int13_params struct + * (u32)a1=INT13_CMD_xxx */ + CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32), + + /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */ + CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33), + + /* undo initialize of virtual link */ + CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34), + + /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ + CMD_INIT = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 35), + + /* check fw capability of a cmd: + * in: (u32)a0=cmd + * out: (u32)a0=errno, 0:valid cmd, a1=supported VNIC_STF_* bits */ + CMD_CAPABILITY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 36), + + /* persistent binding info + * in: (u64)a0=paddr of arg + * (u32)a1=CMD_PERBI_XXX */ + CMD_PERBI = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37), + + /* Interrupt Assert Register functionality + * in: (u16)a0=interrupt number to assert + */ + CMD_IAR = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38), + + /* initiate hangreset, like softreset after hang detected */ + CMD_HANG_RESET = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 39), + + /* hangreset status: + * out: a0=0 reset complete, a0=1 reset in progress */ + CMD_HANG_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 40), + + /* + * Set hw ingress packet vlan rewrite mode: + * in: (u32)a0=new vlan rewrite mode + * out: (u32)a0=old vlan rewrite mode */ + CMD_IG_VLAN_REWRITE_MODE = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 41), + + /* + * in: (u16)a0=bdf of target vnic + * (u32)a1=cmd to proxy + * a2-a15=args to cmd in a1 + * out: (u32)a0=status of proxied cmd + * a1-a15=out args of proxied cmd */ + CMD_PROXY_BY_BDF = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 42), + + /* + * As for BY_BDF except a0 is index of hvnlink subordinate vnic + * or SR-IOV virtual vnic + */ + CMD_PROXY_BY_INDEX = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43), + + /* + * For HPP toggle: + * adapter-info-get + * in: (u64)a0=phsical address of buffer passed in from caller. + * (u16)a1=size of buffer specified in a0. + * out: (u64)a0=phsical address of buffer passed in from caller. + * (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or + * 0 if no VIF-CONFIG-INFO TLV was ever received. */ + CMD_CONFIG_INFO_GET = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44), + + /* INT13 API: (u64)a0=paddr to vnic_int13_params struct + * (u32)a1=INT13_CMD_xxx + */ + CMD_INT13_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 45), + + /* Set default vlan: + * in: (u16)a0=new default vlan + * (u16)a1=zero for overriding vlan with param a0, + * non-zero for resetting vlan to the default + * out: (u16)a0=old default vlan + */ + CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46), + + /* init_prov_info2: + * Variant of CMD_INIT_PROV_INFO, where it will not try to enable + * the vnic until CMD_ENABLE2 is issued. + * (u64)a0=paddr of vnic_devcmd_provinfo + * (u32)a1=sizeof provision info + */ + CMD_INIT_PROV_INFO2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47), + + /* enable2: + * (u32)a0=0 ==> standby + * =CMD_ENABLE2_ACTIVE ==> active + */ + CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48), + + /* + * cmd_status: + * Returns the status of the specified command + * Input: + * a0 = command for which status is being queried. + * Possible values are: + * CMD_SOFT_RESET + * CMD_HANG_RESET + * CMD_OPEN + * CMD_INIT + * CMD_INIT_PROV_INFO + * CMD_DEINIT + * CMD_INIT_PROV_INFO2 + * CMD_ENABLE2 + * Output: + * if status == STAT_ERROR + * a0 = ERR_ENOTSUPPORTED - status for command in a0 is + * not supported + * if status == STAT_NONE + * a0 = status of the devcmd specified in a0 as follows. + * ERR_SUCCESS - command in a0 completed successfully + * ERR_EINPROGRESS - command in a0 is still in progress + */ + CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49), + + /* + * Returns interrupt coalescing timer conversion factors. + * After calling this devcmd, ENIC driver can convert + * interrupt coalescing timer in usec into CPU cycles as follows: + * + * intr_timer_cycles = intr_timer_usec * multiplier / divisor + * + * Interrupt coalescing timer in usecs can be obtained from + * CPU cycles as follows: + * + * intr_timer_usec = intr_timer_cycles * divisor / multiplier + * + * in: none + * out: (u32)a0 = multiplier + * (u32)a1 = divisor + * (u32)a2 = maximum timer value in usec + */ + CMD_INTR_COAL_CONVERT = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 50), + + /* + * Set the predefined mac address as default + * in: + * (u48)a0 = mac addr + */ + CMD_SET_MAC_ADDR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 55), + + /* Update the provisioning info of the given VIF + * (u64)a0=paddr of vnic_devcmd_provinfo + * (u32)a1=sizeof provision info + */ + CMD_PROV_INFO_UPDATE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 56), + + /* Initialization for the devcmd2 interface. + * in: (u64) a0 = host result buffer physical address + * in: (u16) a1 = number of entries in result buffer + */ + CMD_INITIALIZE_DEVCMD2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 57), + + /* Add a filter. + * in: (u64) a0= filter address + * (u32) a1= size of filter + * out: (u32) a0=filter identifier + */ + CMD_ADD_FILTER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 58), + + /* Delete a filter. + * in: (u32) a0=filter identifier + */ + CMD_DEL_FILTER = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 59), + + /* Enable a Queue Pair in User space NIC + * in: (u32) a0=Queue Pair number + * (u32) a1= command + */ + CMD_QP_ENABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 60), + + /* Disable a Queue Pair in User space NIC + * in: (u32) a0=Queue Pair number + * (u32) a1= command + */ + CMD_QP_DISABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 61), + + /* Stats dump Queue Pair in User space NIC + * in: (u32) a0=Queue Pair number + * (u64) a1=host buffer addr for status dump + * (u32) a2=length of the buffer + */ + CMD_QP_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 62), + + /* Clear stats for Queue Pair in User space NIC + * in: (u32) a0=Queue Pair number + */ + CMD_QP_STATS_CLEAR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 63), + + /* Use this devcmd for agreeing on the highest common version supported + * by both driver and fw for features who need such a facility. + * in: (u64) a0 = feature (driver requests for the supported versions + * on this feature) + * out: (u64) a0 = bitmap of all supported versions for that feature + */ + CMD_GET_SUPP_FEATURE_VER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 69), + + /* Control (Enable/Disable) overlay offloads on the given vnic + * in: (u8) a0 = OVERLAY_FEATURE_NVGRE : NVGRE + * a0 = OVERLAY_FEATURE_VXLAN : VxLAN + * in: (u8) a1 = OVERLAY_OFFLOAD_ENABLE : Enable or + * a1 = OVERLAY_OFFLOAD_DISABLE : Disable or + * a1 = OVERLAY_OFFLOAD_ENABLE_V2 : Enable with version 2 + */ + CMD_OVERLAY_OFFLOAD_CTRL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 72), + + /* Configuration of overlay offloads feature on a given vNIC + * in: (u8) a0 = DEVCMD_OVERLAY_NVGRE : NVGRE + * a0 = DEVCMD_OVERLAY_VXLAN : VxLAN + * in: (u8) a1 = VXLAN_PORT_UPDATE : VxLAN + * in: (u16) a2 = unsigned short int port information + */ + CMD_OVERLAY_OFFLOAD_CFG = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 73), +}; + +/* CMD_ENABLE2 flags */ +#define CMD_ENABLE2_STANDBY 0x0 +#define CMD_ENABLE2_ACTIVE 0x1 + +/* flags for CMD_OPEN */ +#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */ +#define CMD_OPENF_IG_DESCCACHE 0x2 /* Do not flush IG DESC cache */ + +/* flags for CMD_INIT */ +#define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */ + +/* flags for CMD_PACKET_FILTER */ +#define CMD_PFILTER_DIRECTED 0x01 +#define CMD_PFILTER_MULTICAST 0x02 +#define CMD_PFILTER_BROADCAST 0x04 +#define CMD_PFILTER_PROMISCUOUS 0x08 +#define CMD_PFILTER_ALL_MULTICAST 0x10 + +/* Commands for CMD_QP_ENABLE/CM_QP_DISABLE */ +#define CMD_QP_RQWQ 0x0 + +/* rewrite modes for CMD_IG_VLAN_REWRITE_MODE */ +#define IG_VLAN_REWRITE_MODE_DEFAULT_TRUNK 0 +#define IG_VLAN_REWRITE_MODE_UNTAG_DEFAULT_VLAN 1 +#define IG_VLAN_REWRITE_MODE_PRIORITY_TAG_DEFAULT_VLAN 2 +#define IG_VLAN_REWRITE_MODE_PASS_THRU 3 + +enum vnic_devcmd_status { + STAT_NONE = 0, + STAT_BUSY = 1 << 0, /* cmd in progress */ + STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */ +}; + +enum vnic_devcmd_error { + ERR_SUCCESS = 0, + ERR_EINVAL = 1, + ERR_EFAULT = 2, + ERR_EPERM = 3, + ERR_EBUSY = 4, + ERR_ECMDUNKNOWN = 5, + ERR_EBADSTATE = 6, + ERR_ENOMEM = 7, + ERR_ETIMEDOUT = 8, + ERR_ELINKDOWN = 9, + ERR_EMAXRES = 10, + ERR_ENOTSUPPORTED = 11, + ERR_EINPROGRESS = 12, + ERR_MAX +}; + +/* + * note: hw_version and asic_rev refer to the same thing, + * but have different formats. hw_version is + * a 32-byte string (e.g. "A2") and asic_rev is + * a 16-bit integer (e.g. 0xA2). + */ +struct vnic_devcmd_fw_info { + char fw_version[32]; + char fw_build[32]; + char hw_version[32]; + char hw_serial_number[32]; + u16 asic_type; + u16 asic_rev; +}; + +struct vnic_devcmd_notify { + u32 csum; /* checksum over following words */ + + u32 link_state; /* link up == 1 */ + u32 port_speed; /* effective port speed (rate limit) */ + u32 mtu; /* MTU */ + u32 msglvl; /* requested driver msg lvl */ + u32 uif; /* uplink interface */ + u32 status; /* status bits (see VNIC_STF_*) */ + u32 error; /* error code (see ERR_*) for first ERR */ + u32 link_down_cnt; /* running count of link down transitions */ + u32 perbi_rebuild_cnt; /* running count of perbi rebuilds */ +}; +#define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */ +#define VNIC_STF_STD_PAUSE 0x0002 /* standard link-level pause on */ +#define VNIC_STF_PFC_PAUSE 0x0004 /* priority flow control pause on */ +/* all supported status flags */ +#define VNIC_STF_ALL (VNIC_STF_FATAL_ERR |\ + VNIC_STF_STD_PAUSE |\ + VNIC_STF_PFC_PAUSE |\ + 0) + +struct vnic_devcmd_provinfo { + u8 oui[3]; + u8 type; + u8 data[]; +}; + +/* These are used in flags field of different filters to denote + * valid fields used. + */ +#define FILTER_FIELD_VALID(fld) (1 << (fld - 1)) + +#define FILTER_FIELDS_USNIC ( \ + FILTER_FIELD_VALID(1) | \ + FILTER_FIELD_VALID(2) | \ + FILTER_FIELD_VALID(3) | \ + FILTER_FIELD_VALID(4)) + +#define FILTER_FIELDS_IPV4_5TUPLE ( \ + FILTER_FIELD_VALID(1) | \ + FILTER_FIELD_VALID(2) | \ + FILTER_FIELD_VALID(3) | \ + FILTER_FIELD_VALID(4) | \ + FILTER_FIELD_VALID(5)) + +#define FILTER_FIELDS_MAC_VLAN ( \ + FILTER_FIELD_VALID(1) | \ + FILTER_FIELD_VALID(2)) + +#define FILTER_FIELD_USNIC_VLAN FILTER_FIELD_VALID(1) +#define FILTER_FIELD_USNIC_ETHTYPE FILTER_FIELD_VALID(2) +#define FILTER_FIELD_USNIC_PROTO FILTER_FIELD_VALID(3) +#define FILTER_FIELD_USNIC_ID FILTER_FIELD_VALID(4) + +struct filter_usnic_id { + u32 flags; + u16 vlan; + u16 ethtype; + u8 proto_version; + u32 usnic_id; +} __packed; + +#define FILTER_FIELD_5TUP_PROTO FILTER_FIELD_VALID(1) +#define FILTER_FIELD_5TUP_SRC_AD FILTER_FIELD_VALID(2) +#define FILTER_FIELD_5TUP_DST_AD FILTER_FIELD_VALID(3) +#define FILTER_FIELD_5TUP_SRC_PT FILTER_FIELD_VALID(4) +#define FILTER_FIELD_5TUP_DST_PT FILTER_FIELD_VALID(5) + +/* Enums for the protocol field. */ +enum protocol_e { + PROTO_UDP = 0, + PROTO_TCP = 1, +}; + +struct filter_ipv4_5tuple { + u32 flags; + u32 protocol; + u32 src_addr; + u32 dst_addr; + u16 src_port; + u16 dst_port; +} __packed; + +#define FILTER_FIELD_VMQ_VLAN FILTER_FIELD_VALID(1) +#define FILTER_FIELD_VMQ_MAC FILTER_FIELD_VALID(2) + +struct filter_mac_vlan { + u32 flags; + u16 vlan; + u8 mac_addr[6]; +} __packed; + +/* Specifies the filter_action type. */ +enum { + FILTER_ACTION_RQ_STEERING = 0, + FILTER_ACTION_MAX +}; + +struct filter_action { + u32 type; + union { + u32 rq_idx; + } u; +} __packed; + +/* Specifies the filter type. */ +enum filter_type { + FILTER_USNIC_ID = 0, + FILTER_IPV4_5TUPLE = 1, + FILTER_MAC_VLAN = 2, + FILTER_MAX +}; + +struct filter { + u32 type; + union { + struct filter_usnic_id usnic; + struct filter_ipv4_5tuple ipv4; + struct filter_mac_vlan mac_vlan; + } u; +} __packed; + +enum { + CLSF_TLV_FILTER = 0, + CLSF_TLV_ACTION = 1, +}; + +/* Maximum size of buffer to CMD_ADD_FILTER */ +#define FILTER_MAX_BUF_SIZE 100 + +struct filter_tlv { + u32 type; + u32 length; + u32 val[]; +}; + +enum { + CLSF_ADD = 0, + CLSF_DEL = 1, +}; + +/* + * Writing cmd register causes STAT_BUSY to get set in status register. + * When cmd completes, STAT_BUSY will be cleared. + * + * If cmd completed successfully STAT_ERROR will be clear + * and args registers contain cmd-specific results. + * + * If cmd error, STAT_ERROR will be set and args[0] contains error code. + * + * status register is read-only. While STAT_BUSY is set, + * all other register contents are read-only. + */ + +/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */ +#define VNIC_DEVCMD_NARGS 15 +struct vnic_devcmd { + u32 status; /* RO */ + u32 cmd; /* RW */ + u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */ +}; + +#define DEVCMD2_FNORESULT 0x1 /* Don't copy result to host */ + +#define VNIC_DEVCMD2_NARGS VNIC_DEVCMD_NARGS +struct vnic_devcmd2 { + u16 pad; + u16 flags; + u32 cmd; + u64 args[VNIC_DEVCMD2_NARGS]; +}; + +#define VNIC_DEVCMD2_NRESULTS VNIC_DEVCMD_NARGS +struct devcmd2_result { + u64 results[VNIC_DEVCMD2_NRESULTS]; + u32 pad; + u16 completed_index; + u8 error; + u8 color; +}; + +#define DEVCMD2_RING_SIZE 32 +#define DEVCMD2_DESC_SIZE 128 + +enum overlay_feature_t { + OVERLAY_FEATURE_NVGRE = 1, + OVERLAY_FEATURE_VXLAN, + OVERLAY_FEATURE_MAX, +}; + +enum overlay_ofld_cmd { + OVERLAY_OFFLOAD_ENABLE, + OVERLAY_OFFLOAD_DISABLE, + OVERLAY_OFFLOAD_ENABLE_P2, + OVERLAY_OFFLOAD_MAX, +}; + +#define OVERLAY_CFG_VXLAN_PORT_UPDATE 0 + +#define ENIC_VXLAN_INNER_IPV6 BIT(0) +#define ENIC_VXLAN_OUTER_IPV6 BIT(1) +#define ENIC_VXLAN_MULTI_WQ BIT(2) + +/* Use this enum to get the supported versions for each of these features + * If you need to use the devcmd_get_supported_feature_version(), add + * the new feature into this enum and install function handler in devcmd.c + */ +enum vic_feature_t { + VIC_FEATURE_VXLAN, + VIC_FEATURE_RDMA, + VIC_FEATURE_VXLAN_PATCH, + VIC_FEATURE_MAX, +}; + +#endif /* _VNIC_DEVCMD_H_ */ |